بەرهەمەکان (3,600+)

PCM1690DCAR - 8-Channel 24-Bit 192 kHz Audio DAC | TI
PCM1690DCAR

PCM1690DCAR - 8-Channel 24-Bit 192 kHz Audio DAC | TI

Texas Instruments PCM1690DCAR is a high-performance, eight-channel, 24-bit audio digital-to-analog converter with differential outputs, 8 kHz to 192 kHz sampling-rate support, and a 48-pin HTSSOP package with an exposed thermal pad. The device provides a 113 dB signal-to-noise ratio and accepts 16-, 20-, 24-, or 32-bit digital audio input words. An audio DAC is a signal-conversion semiconductor that converts digital audio samples into analog voltages suitable for amplification and loudspeaker drive. In the broader electronics hierarchy, a DAC belongs to a data converter, which is an interface IC and ultimately part of the signal-chain and audio-processing ecosystem. Multi-channel differential DACs are used when several synchronized outputs require consistent resolution, dynamic range, and channel-to-channel behavior. The PCM1690DCAR uses an enhanced multilevel delta-sigma modulator to perform digital-to-analog conversion. Its interface supports 16-, 20-, 24-, and 32-bit input words across sampling rates from 8 kHz through 192 kHz. A 113 dB SNR specification supports high-fidelity audio conversion, while the eight-channel architecture reduces the number of separate converters required in surround-sound and multi-zone equipment. Configuration is handled through a three-wire SPI-compatible interface, a two-wire I2C-compatible serial interface, or hardware control using two control pins. Register-level control provides access to digital attenuation, soft mute, de-emphasis, and other programmable functions. This combination of serial and hardware control supports both integrated digital systems and designs that require direct hardware sequencing. Typical applications include home-theater receivers, DVD players, active speaker systems, automotive infotainment equipment, multichannel soundbars, and professional audio monitoring. Differential outputs can simplify balanced analog routing and reduce sensitivity to ground-borne interference when paired with suitable analog filtering and output circuitry. PCB implementation should preserve short, symmetric analog paths around each differential output and provide appropriate input, output, and filtering components referenced by the manufacturer application guidance. The exposed thermal pad requires a properly designed copper area and thermal via pattern. Designers should also account for the device's -40 °C to 85 °C operating-temperature range when defining the product enclosure and system thermal conditions. This product page combines the manufacturer's core conversion and interface specifications with package guidance, drop-in alternatives, practical layout notes, and application-focused selection criteria. That engineering context helps designers distinguish the PCM1690DCAR from related PCM1690 orderable variants and evaluate whether its eight-channel, differential-output architecture matches a particular audio system.

RFQ پەیوەندی
PCM1691DCA - 24-Bit 192kHz 8-Channel Audio DAC | Texas Instruments
PCM1691DCA

PCM1691DCA - 24-Bit 192kHz 8-Channel Audio DAC | Texas Instruments

Texas Instruments PCM1691DCA is a 24-bit, 192 kHz sampling, eight-channel audio digital-to-analog converter housed in a 48-pin HTSSOP package. It operates from a 4.5 V to 5.5 V supply and supports I2S digital audio input through an integrated DSP interface. The converter architecture provides eight analog outputs for multichannel audio equipment, including surround-sound receivers, professional mixers, home-theater systems, and powered speakers. An audio DAC is a digital-to-analog converter, a member of the broader signal-conversion and data-conversion IC hierarchy. It receives digital audio samples from a processor, codec, receiver, or digital audio interface and reconstructs corresponding analog voltages for amplifiers, speakers, headphones, or line-level equipment. The PCM1691DCA combines an eight-channel output stage with configurable digital audio processing, making it suitable for designs requiring multiple synchronized analog channels from one converter. The principal operating specifications are 24-bit resolution, a maximum sampling rate of 192 kHz, eight audio channels, and a 4.5 V to 5.5 V analog and digital supply range. Its I2S interface is intended for receiving serial PCM audio data from a digital audio host. The 48-pin HTSSOP package supports dense, surface-mount multichannel audio designs while exposing the converter's digital, analog, clock, and power connections. The PCM1691DCA is positioned for high-resolution multichannel audio rather than single-channel playback. Eight integrated DAC channels reduce the number of external converter packages required for surround-sound and multichannel mixer architectures. Operation at up to 192 kHz supports high-resolution source material, while 24-bit word length provides the numerical resolution required by professional and premium consumer audio systems. Typical uses include 7.1-channel home-theater receivers, multichannel digital mixers, active speaker systems, broadcast and studio monitoring equipment, and consumer AV processors. The eight outputs can also implement less conventional channel arrangements where independent analog playback paths are useful. System clocking, digital-audio routing, mute behavior, analog output filtering, and ground management remain central to achieving reliable performance. For layout, place decoupling capacitors near the supply pins and route the I2S, clock, and data traces away from sensitive analog output paths. Confirm that the host controller supports the required sampling rate, bit depth, and serial format. Component values for output filtering and clock synchronization should follow the manufacturer datasheet and reference layouts rather than general-purpose substitutions. This product page combines converter specifications, drop-in family alternatives, application guidance, and PCB design considerations. The comparison tables also clarify package and interface differences among verified replacements, helping engineers select a compatible revision before committing a 48-pin multichannel audio design to production.

RFQ پەیوەندی
PCM1702PG4 - 20-Bit 768 kSPS Audio DAC | Texas Instruments
PCM1702PG4

PCM1702PG4 - 20-Bit 768 kSPS Audio DAC | Texas Instruments

The Texas Instruments PCM1702PG4 is a precision 20-bit, single-channel digital-to-analog converter designed for professional audio equipment, with a maximum conversion rate of 768 kSPS and bipolar analog output in a 16-pin through-hole DIP package. It operates from dual ±4.75 V to ±5.25 V analog supplies and accepts serial digital audio data. The converter supports 44.1 kHz audio and is specified to deliver low full-scale distortion of -96 dB typical. A digital-to-analog converter, or DAC, converts digital audio samples into a continuous analog voltage. The PCM1702 belongs to the broader digital-to-analog converter, audio converter, data-converter IC, and mixed-signal semiconductor hierarchy. Its role in an audio signal chain is to reconstruct a left, right, or other discrete analog channel from a digital bitstream while preserving low distortion around bipolar zero. The PCM1702 uses advanced sign-magnitude architecture to reduce unwanted glitches and nonlinear transitions near zero. Its principal characteristics include 20-bit resolution, a maximum sample rate of 768 kSPS, serial digital input, and approximately -96 dB typical full-scale distortion. These specifications make it suitable for high-resolution CD-audio playback, professional digital mixing consoles, digital instruments, studio monitors, and other equipment requiring a discrete high-resolution audio output channel. Because the device uses a bipolar output architecture, its analog section requires positive and negative supply rails. The documented operating range is approximately ±4.75 V to ±5.25 V, while its analog output is referenced to ground through the application network. The 16-pin DIP package favors through-hole construction and makes the converter suitable for legacy audio boards, repair assemblies, and designs where a surface-mount package would be inconvenient. In a typical audio path, a digital audio controller or receiver supplies serial data and a master clock to the PCM1702. The converter then drives a balanced or unbalanced output stage through the appropriate coupling, filtering, and impedance-matching network. Attention must be paid to clock timing, digital data format, analog supply cleanliness, output loading, and the required output filtering because those details strongly influence distortion and signal integrity. The PCM1702PG4 is best considered when an existing design specifically calls for a 16-pin DIP audio DAC and its clock, supply, and serial interface requirements align with the target board. Before substituting another device, verify the complete pinout, digital timing, analog output topology, supply rails, and package dimensions rather than relying only on bit depth and sample rate. This product record combines the converter's core electrical and packaging characteristics with application guidance, practical design considerations, and verified same-package alternatives. It is intended to help engineers identify whether the PCM1702PG4 fits an audio-conversion, repair, or upgrade requirement before committing to a board-level implementation.

RFQ پەیوەندی
PCM1702U - 20-Bit 44.1kHz Audio DAC | Texas Instruments
PCM1702U

PCM1702U - 20-Bit 44.1kHz Audio DAC | Texas Instruments

The Texas Instruments PCM1702U is a precision 20-bit serial audio digital-to-analog converter featuring a 44.1 kHz sampling rate, advanced sign-magnitude BiCMOS architecture, and a 20-pin SOIC package. Its headline specifications include -96 dB typical full-scale THD+N, 120 dB typical A-weighted SNR, and glitch-free operation near bipolar zero. A digital-to-analog converter, or DAC, converts digital audio samples into an analog voltage or current that can drive downstream amplifiers, headphones, mixers, or loudspeaker systems. Within the broader component hierarchy, the PCM1702U is an audio DAC, a member of the data-converter family, and ultimately a semiconductor designed to bridge digital signal-processing systems with analog audio outputs. The principal feature of the PCM1702U is its advanced sign-magnitude architecture, which is designed to suppress unwanted glitches and nonlinear transitions around bipolar zero. The manufacturer datasheet also identifies an industry-standard serial interface, 20-bit resolution, and low-noise performance. Its -96 dB typical THD+N is specified with a full-scale output and without external adjustment, indicating that the core distortion performance does not depend on a user-supplied trim procedure. The device combines a BiCMOS implementation with a fast-settling output architecture. These characteristics are relevant when converting sequential digital audio data into a smooth analog waveform, particularly near zero crossings where conventional converter architectures may exhibit glitching. The serial format supports integration with digital audio processors while the analog output is intended for subsequent signal conditioning rather than direct loudspeaker drive. Typical uses include CD-player and digital-audio source designs, professional audio interface signal paths, digital mixing consoles, sampling systems, and other equipment requiring a high-resolution DAC. The 44.1 kHz capability directly matches the standard rate used by CD audio, while higher-rate source equipment can use the converter only if its upstream clocking and filtering architecture permits the intended operating rate. Designers should preserve the required analog and digital supply arrangements, use suitable output coupling or load circuitry, and validate the complete signal path rather than relying only on the converter's headline distortion figure. The verified excerpts do not provide the complete pin names, output mode, voltage references, supply limits, or recommended application circuit, so those implementation details must be confirmed in the manufacturer datasheet before layout. This page combines verified manufacturer-datasheet characteristics, distributor metadata, lifecycle information, application guidance, and drop-in alternatives into an engineering-focused selection reference. It also clearly identifies unavailable parameters instead of estimating them, allowing designers to distinguish documented performance from information that still requires circuit-level verification.

RFQ پەیوەندی
PCM1702U-J - 20-Bit Audio DAC | Texas Instruments
PCM1702U-J

PCM1702U-J - 20-Bit Audio DAC | Texas Instruments

Texas Instruments PCM1702U-J is a precision 20-bit digital-to-analog converter designed for audio signal generation in a 20-pin SOIC package. It accepts industry-standard serial audio data, supports 44.1 kHz operation, and uses a BiCMOS process with advanced sign-magnitude architecture to reduce unwanted glitches and nonlinearities around bipolar zero. The converter provides -96 dB typical THD+N at full-scale output and 120 dB typical A-weighted SNR, according to the manufacturer datasheet. A digital-to-analog converter, or DAC, is an interface IC that converts digital audio samples into a continuous analog voltage. The PCM1702 belongs to the broader digital-to-analog converter category, which sits within data converters, interface ICs, and semiconductor signal-chain components. In a CD player, network audio receiver, digital mixer, or digital audio source, it typically receives interleaved serial data and clock signals, then reconstructs the left and right analog channels through an external output stage. The PCM1702U-J supports 20-bit audio resolution and 44.1 kHz sampling. Its advanced sign-magnitude architecture is intended to suppress glitch energy when the digital signal crosses zero, improving perceived cleanliness during low-level passages and digital silence transitions. The manufacturer also describes fast settling current as a feature of the converter family. These characteristics make the device relevant to high-fidelity audio designs where low distortion and low-level signal integrity matter. The BiCMOS implementation combines bipolar and CMOS technologies, a construction commonly used in audio converters to balance analog output performance with digital-interface functionality. The PCM1702 family uses an industry-standard serial audio interface, allowing it to operate with suitable source and transport circuitry. Digital input routing, clocking, de-emphasis filtering, and output-stage design remain external to the converter and must be designed according to the manufacturer application guidance. Typical uses include CD and digital-audio transport boards, stereo DAC modules, digital mixing consoles, home-theater audio equipment, and embedded digital audio sources. The converter is especially appropriate when a design requires a discrete, high-resolution stereo audio DAC rather than a codec combining conversion with microphone amplification or other mixed-signal functions. The most important design consideration is preserving a clean analog path after the DAC. Short output traces, suitable ground-return planning, correctly selected reconstruction and load networks, and stable clocking help retain the converter’s low-distortion performance. Decoupling capacitors should be placed close to their supply pins, and unused inputs should follow the pin-description table in the manufacturer datasheet. This page consolidates the PCM1702U-J datasheet specifications, package details, sourcing questions, comparison parameters, and practical integration notes. It also distinguishes documented drop-in family variants from newer redesign alternatives so engineers can identify whether PCB reuse is realistic or a redesigned audio architecture is required.

RFQ پەیوەندی
PCM1702U/2K - 20-Bit Stereo Audio DAC | Texas Instruments
PCM1702U/2K

PCM1702U/2K - 20-Bit Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1702U/2K is a precision 20-bit stereo digital-to-analog converter with a maximum sampling rate of 44.1 kHz, a serial digital interface, and dual analog outputs in a 20-pin SOIC package. The converter uses BiCMOS circuitry and an advanced sign-magnitude architecture to suppress unwanted glitches and nonlinear distortion around bipolar zero. An audio DAC is a data converter that accepts digital audio samples and generates proportional analog voltages or currents suitable for audio amplification. In the signal-chain hierarchy, the PCM1702 belongs to the digital-to-analog converter class, the broader ADC/DAC category, and ultimately the semiconductor and audio-signal-conversion markets. It is intended for designs requiring precise conversion of CD-audio-format data into left and right analog channels. Key characteristics include 20-bit resolution, 44.1 kHz sampling support, dual-channel operation, a serial interface, and low-power bipolar analog output stages. According to the manufacturer datasheet, full-scale distortion is typically -96 dB and signal-to-noise ratio is typically 120 dB when measured with the A-weighted method. The sign-magnitude architecture improves behavior near zero, while the short 0.2 microsecond settling time supports accurate reconstruction of sampled audio waveforms. The PCM1702 family provides separate analog, digital, and ground connections that support careful partitioning of sensitive signal paths. Its serial input reduces the number of data connections compared with a parallel interface, simplifying routing on a compact audio board. Because this is a bipolar-output converter, the associated output stage and analog supply design materially influence channel balance, noise, and achievable distortion performance. Typical applications include CD player and digital-audio transport boards, high-fidelity stereo DAC products, professional audio equipment, and digital mixers requiring a dedicated 20-bit stereo conversion stage. It can also be used in instrumentation or communications equipment when its specified 44.1 kHz rate and low-noise bipolar output are appropriate. The primary design consideration is analog supply and output conditioning. Follow the manufacturer datasheet for decoupling, output filtering, grounding, and component selection around the DAC pins. Treat the converter and its analog output path as a high-accuracy measurement chain rather than as a generic logic output. This product page combines the converter's principal electrical characteristics, verified package information, family drop-in options, comparison parameters, and practical application guidance. It is intended to help engineers evaluate the PCM1702U/2K for legacy and new high-fidelity audio designs.

RFQ پەیوەندی
PCM1702UE6 - 20-Bit Audio DAC | Texas Instruments | SOIC-20
PCM1702UE6

PCM1702UE6 - 20-Bit Audio DAC | Texas Instruments | SOIC-20

Texas Instruments PCM1702UE6 is a precision 20-bit digital-to-analog converter designed for audio signal generation, with a 44.1 kHz serial interface and a 20-pin SOIC package. The BiCMOS advanced sign-magnitude architecture is designed to reduce unwanted glitches and nonlinearities around bipolar zero, while the specified full-scale distortion reaches -96 dB typical. An audio digital-to-analog converter, or DAC, converts sampled digital audio into an analog voltage suitable for audio amplification. The PCM1702 belongs to the broader ADC/DAC and signal-conversion hierarchy, where it serves as the analog-output stage between a digital audio source and a line-level amplifier. Its serial interface reduces the number of interconnects compared with a parallel DAC and supports compact digital audio equipment layouts. The principal features of the PCM1702UE6 include 20-bit conversion resolution, a 44.1 kHz sampling interface, BiCMOS construction, and the advanced sign-magnitude architecture. These attributes make the converter suitable for CD-player-style digital audio paths, consumer audio equipment, and other systems requiring accurate reconstruction of a bipolar audio waveform. The 20-SO package also supports conventional surface-mount assembly rather than through-hole insertion. Technical performance is centered on low waveform distortion near full-scale output. The manufacturer describes a typical full-scale distortion of -96 dB and emphasizes the sign-magnitude architecture for glitch suppression around zero. These characteristics are especially relevant where low-level audio details, stable channel balance, and absence of transition artifacts influence perceived signal quality. Typical applications include digital audio playback, CD-ROM audio outputs, multimedia equipment, and external digital-to-analog conversion stages. In these systems, the PCM1702UE6 receives serialized digital samples, reconstructs the analog waveform, and drives a subsequent audio amplifier. System designers should pay particular attention to output filtering, grounding, digital-interface timing, and power-supply cleanliness. A key design consideration is that this converter is obsolete, so a new production design should normally use a currently supported converter unless an existing design must be serviced. When maintaining an existing PCM1702UE6 circuit, preserve the original pinout, analog topology, interface timing, and filtering arrangement because even a functionally similar replacement is not automatically a drop-in substitute. This product record combines the converter's core electrical characteristics, lifecycle position, package details, and replacement assessment. It also provides practical guidance for distinguishing true drop-in options from functionally similar converters that require different boards, interfaces, or analog circuitry.

RFQ پەیوەندی
PCM1704U - 24-Bit 96kHz Audio DAC | Texas Instruments
PCM1704U

PCM1704U - 24-Bit 96kHz Audio DAC | Texas Instruments

The Texas Instruments PCM1704U is a precision 24-bit, 96kHz BiCMOS sign-magnitude digital-to-analog converter (audio DAC) delivered in a 20-pin SOIC package. It operates from dual power supplies of approximately +5V and -5V, supports sampling frequencies from 16kHz to 96kHz with 8x oversampling at 96kHz, and offers a 0.2 microsecond output settling time over an operating temperature range of -25C to +85C. A digital-to-analog converter (DAC) is a mixed-signal device that transforms digital audio sample data into a continuous analog voltage or current. Within the signal-chain hierarchy, a DAC sits between a digital audio source (DSP, receiver, or interpolation filter) and the analog output stage (I/V converter and low-pass filter) of an audio system. High-resolution audio DACs such as the PCM1704 define the ultimate fidelity limit of the entire playback chain. Key features of the PCM1704U include exceptionally high dynamic performance, ultra-low distortion, and excellent low-level signal linearity. The advanced sign-magnitude architecture uses two matched DAC cores steered by a sign bit, which eliminates zero-crossing distortion - a fundamental weakness of conventional unipolar ladder DACs. This makes the device especially strong at reproducing quiet passages where low-level linearity matters most. Technically, the PCM1704 is fabricated on a BiCMOS process that combines high-speed bipolar analog circuitry with low-power CMOS logic. The serial audio input interface accepts standard I2S-style data, bit clock, and left/right clock signals, and the device is designed to be paired with a digital interpolation filter for 8x oversampling operation at 96kHz sampling rates. Typical applications include high-end consumer audio CD and SACD players, professional studio mastering equipment, digital mixing consoles, and audiophile outboard DACs, where the PCM1704's ultra-low distortion directly translates into greater dynamic range and transparency. Design consideration: because the PCM1704 requires dual supplies and an external I/V conversion stage, and is now obsoleted by Texas Instruments, new designs should budget for end-of-life sourcing or evaluate the PCM179x family, which TI identifies as the recommended performance successor rather than a pin-compatible replacement. This page adds value beyond the manufacturer datasheet by synthesizing distributor availability, grade-variant comparisons, obsolescence guidance from TI E2E forums, and practical design notes in one place.

RFQ پەیوەندی
PCM1704U-J - 24-Bit 96kHz Sign-Magnitude DAC | Texas Instruments
PCM1704U-J

PCM1704U-J - 24-Bit 96kHz Sign-Magnitude DAC | Texas Instruments

The Texas Instruments PCM1704U-J is a precision 24-bit, 96 kHz sign-magnitude digital-to-analog converter from TI's SoundPlus family, housed in a 20-pin SOIC package. It delivers exceptional dynamic performance with K-grade dynamic range of 112 dB typical, signal-to-noise ratio of 120 dB typical, and THD+N as low as 0.0008% typical at the J grade. The device uses TI's proprietary BiCMOS sign-magnitude architecture with laser-trimmed thin-film resistors to achieve ultra-low distortion and excellent low-level signal resolution. A sign-magnitude DAC is a digital-to-analog converter architecture that uses two complementary current sources switched in opposite phase per bit, rather than a thermometer-coded unary or segmented topology. This approach eliminates the major-carry switching glitches inherent in conventional binary-weighted DACs, yielding -40 dB lower glitch energy. In the broader hierarchy, the PCM1704U-J sits as an audio DAC, which is a sub-category of data-converter IC, itself under the mixed-signal IC umbrella in signal chain products. The BiCMOS process pairs bipolar precision transistors with CMOS logic, achieving fast settling of ±1.2 mA in 200 ns while drawing modest operating current. The PCM1704U-J supports sampling frequencies from 16 kHz to 96 kHz with 8X oversampling when paired with a digital interpolation filter. Its fast current output of ±1.2 mA in 200 ns enables clean reproduction of transients in high-resolution audio material. Internal glitch-free differential current outputs eliminate mid-scale code-dependent distortion, while the on-chip precision bandgap reference stabilizes the output compliance over temperature. Typical applications include high-end consumer CD/SACD players, professional studio digital mixers, audiophile outboard DACs, and mastering-grade A/D converters. The wide dynamic range also makes it useful in measurement instrumentation where 24-bit resolution at high update rates is required. Key design considerations include using a true differential current-to-voltage converter (typically an op-amp such as the OPA1612 or OPA2134) and a low-noise voltage reference to bias the I-to-V stage. The 20-pin SOIC requires a standard SOIC-20 footprint, with analog and digital grounds tied at a single star point near the device. This page synthesizes manufacturer datasheet specifications, current distributor pricing, drop-in same-family alternatives within TI's PCM1704 grading scheme, and practical application circuits that are not consolidated in the original datasheet.

RFQ پەیوەندی
PCM1704U-J/2K - 24-Bit 96kHz Sign-Magnitude BiCMOS Audio DAC | Texas Instruments
PCM1704U-J-2K

PCM1704U-J/2K - 24-Bit 96kHz Sign-Magnitude BiCMOS Audio DAC | Texas Instruments

The Texas Instruments PCM1704U-J/2K is a precision 24-bit, 96 kHz BiCMOS sign-magnitude digital-to-analog converter housed in a 20-pin SOIC package. The J grade delivers 112 dB dynamic range, 120 dB SNR, and 0.0008 % THD+N (typical), making it one of the legendary multi-bit R-2R audio DACs long favored in high-end consumer and professional audio designs. The 8X oversampling interface supports a maximum sampling frequency of 96 kHz, while a fast current output of ±1.2 mA in 200 ns enables clean transient response for music reproduction. The /2K suffix denotes the 2,000-piece tape-and-reel packaging option. A digital-to-analog converter (DAC) is an integrated circuit that converts digital audio words into an analog voltage or current signal. Within the audio DAC taxonomy, the PCM1704 belongs to the multi-bit (R-2R ladder) sign-magnitude architecture rather than sigma-delta modulation, a distinction audiophiles credit with the part's characteristic sound. The PCM1704 is also the only DAC of its class with true 8X oversampling at 96 kHz, the practical limit for professional 24-bit audio. Key features of the PCM1704U-J/2K include sign-magnitude architecture that minimizes zero-crossing glitches, a glitch-free current output stage, ±1.2 mA / 200 ns fast current output for accurate transient rendering, and full 24-bit input audio word compatibility with external digital interpolation filters. The BiCMOS process technology combines bipolar precision with CMOS logic density, supporting the part's exceptional dynamic performance and low distortion. Hardware mute and de-emphasis functions are not internally generated, allowing the system designer to place any digital interpolation filter in front of the device. Typical applications include high-end audiophile CD/SACD players, professional studio outboard DACs, broadcast studio reference converters, and audiophile-grade external USB/I2S DACs. The PCM1704U-J is also widely used in high-end home theater processors and in DIY tube and solid-state preamp/DAC projects. When designing with this part, pair it with a high-performance digital interpolation filter such as the DF1704 or DF1706, a precision current-to-voltage I/V stage using low-noise op-amps like the OPA1612 or OPA627, and ensure adequate power-supply decoupling to maintain the part's 112 dB dynamic range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a typical DigiKey or Mouser product listing.

RFQ پەیوەندی
PCM1704U-K - 24-Bit 96kHz Sign-Magnitude Audio DAC | TI
PCM1704U-K

PCM1704U-K - 24-Bit 96kHz Sign-Magnitude Audio DAC | TI

The Texas Instruments PCM1704U-K is a precision 24-bit, 96 kHz BiCMOS sign-magnitude digital-to-analog converter from TI's SoundPlus audio lineage, housed in a 20-pin SOIC (SO) package and graded in the top-bin "K" performance class. It delivers 24-bit resolution at 96 kHz sampling with an ultra-low distortion architecture, 112 dB typical dynamic range, and a sign-magnitude topology that minimizes zero-crossing glitches versus conventional R-2R ladders. The serial audio data interface accepts 24-bit I2S-compatible words. A digital-to-analog converter (DAC) is a semiconductor device that reconstructs an analog waveform from a digital audio stream; within the broader taxonomy, audio DACs belong to data converters (ADC/DAC ICs), then mixed-signal ICs, then integrated circuits. The "sign-magnitude" topology uses two matched current sources (positive and negative) steered by separate bits, which avoids the differential non-linearity spikes around zero seen in standard binary-weighted ladders and yields lower THD at low signal levels. Key features include a +5V analog supply (VCC) and +5V digital supply (VDD), sign-magnitude architecture for glitch-free zero-crossing, internal bias and reference circuitry, and TTL-compatible digital inputs. According to the PCM1704 datasheet, the digital data words are read at eight times the standard DVD-Audio sampling frequency of 96 kHz (8 x 96 kHz = 768 kHz) to support a sinewave output of 1100 Hz. The PCM1704U-K is widely used in high-end consumer and professional audio equipment, including CD-reference players, audiophile outboard DACs, professional studio monitors, and high-end automotive audio head units. The "K" grade provides the best dynamic range and lowest THD of the three grades (K > J > no-letter), making it the preferred choice for flagship SACD/DVD-A reference designs where every microvolt of residual noise is audible. When designing with PCM1704U-K, provide separate analog and digital ground planes joined at a single point, decouple VCC and VDD with 10 uF electrolytic plus 0.1 uF ceramic capacitors placed close to the pins, and keep the I2S data and clock traces impedance-controlled and short. Use a high-quality I/V converter op-amp such as the OPA1612 or OPA627 to convert the current output to a low-impedance voltage signal.

RFQ پەیوەندی
PCM1704U/2K - 24-Bit 96kHz Stereo DAC | Texas Instruments
PCM1704U/2K

PCM1704U/2K - 24-Bit 96kHz Stereo DAC | Texas Instruments

Texas Instruments PCM1704U/2K is a 24-bit, dual-channel BiCMOS sign-magnitude digital-to-analog converter supporting sampling rates up to 96 kHz. The device operates from dual ±5 V supplies and is packaged in a 20-pin SOIC with a 5.30 mm body width. Its serial interface and sign-magnitude output architecture make it suitable for high-fidelity digital audio systems. A digital-to-analog converter, or DAC, converts digital audio samples into continuous analog voltage signals. Within the broader signal-chain hierarchy, a DAC sits after the digital source and before the analog output amplifier, reconstruction filter, and speaker or headphone stage. The PCM1704U/2K is therefore a precision audio interface component that translates 24-bit digital words into separate positive and negative analog waveforms for two stereo channels. The principal features are 24-bit resolution, operation up to a 96 kHz sampling rate, two-channel sign-magnitude output, and dual ±5 V analog power. A BiCMOS process combines bipolar analog circuitry with CMOS control logic. The sign-magnitude output format provides separate positive and negative outputs around a bipolar reference system, allowing the downstream reconstruction network to preserve the sign of each digital sample. The PCM1704U/2K belongs to Texas Instruments' SoundPlus family of audio data converters. Its architecture is intended for CD-player, DVD-player, digital-audio, and other equipment requiring a serial digital input and high-resolution stereo conversion. Because the converter performs quantization directly into analog currents or voltages, support circuitry includes a clock source, digital-interface routing, output reconstruction filtering, and a stable low-noise reference arrangement. Typical applications include high-fidelity stereo DAC systems, CD and DVD audio equipment, digital mixing consoles, USB and network-audio player analog output stages, and premium consumer audio products. The 96 kHz maximum rate supports high-resolution source material, while the 24-bit word length is appropriate for preserving low-level signal detail through the digital portion of the audio chain. Layout is critical because the analog outputs and digital inputs meet on a small 20-pin SOIC. Keep digital clock and data traces away from the output pins, provide a low-impedance ground return, and use symmetric decoupling close to the supply pins. Follow the manufacturer datasheet for the output load, reference, filter, and power-supply requirements rather than treating the DAC as a general-purpose converter. This page combines the verified PCM1704U/2K package and conversion specifications with comparison guidance, sourcing information, and practical application notes. It also distinguishes true pin-compatible options from newer PCM179x products that may require a different interface, package, or output architecture.

RFQ پەیوەندی
PCM1710U/1K - 20-Bit Stereo Audio DAC | Texas Instruments
PCM1710U/1K

PCM1710U/1K - 20-Bit Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1710U/1K is a dual 16/20-bit audio digital-to-analog converter with 48 kHz serial audio operation, housed in a 28-pin SOIC package measuring 0.295 inches, or 7.50 mm, in body width. The device integrates the digital processing and dual voltage-output conversion functions required to translate decoded stereo audio data into left- and right-channel analog signals. An audio DAC is a semiconductor in the digital-to-analog converter and data-conversion hierarchy. It receives digital audio samples, reconstructs their analog voltage waveform, and supplies a continuously variable analog signal for downstream audio amplification. The PCM1710U/1K combines a stereo converter architecture with a serial digital interface, making it suitable for systems that convert CD, DVD, broadcast, or computer audio into balanced or unbalanced analog outputs. The principal identified specifications are 20-bit resolution, 48 kHz operation, dual analog output, and a 28-SOIC package. The converter description identifies it as a dual 16/20-bit audio DAC with dual voltage outputs. Its serial interface allows a digital audio source to feed the converter without requiring a parallel data bus, reducing wiring complexity in compact consumer and professional audio equipment. The PCM1710U/1K is intended for stereo audio signal paths where two analog channels are required from one converter package. Its 48 kHz rate aligns with the conventional 44.1 kHz CD-audio domain and other base-rate digital audio systems. The 20-bit advertised resolution describes the converter's digital data capability, while the 16/20-bit designation reflects the converter family terminology used in the product description. Typical uses include CD-player analog stages, multichannel audio receivers, digital mixing equipment, active speakers, and general-purpose stereo audio acquisition systems. In these applications, the converter is placed between a digital audio source and an analog voltage amplifier or line-input stage. The analog outputs must be interpreted according to the manufacturer's application circuit, including the required decoupling and output integration network. When laying out the PCB, treat the SOIC power and ground connections as high-current paths and keep analog output routing away from digital clock and serial-data traces. Verify the required output filters, mute behavior, and analog supply arrangement against the manufacturer datasheet before releasing the layout. This page also consolidates the exact ordering code, package information, commercial data, and drop-in replacement assessment for engineering review.

RFQ پەیوەندی
PCM1710UG4 - 20-Bit Stereo DAC | Texas Instruments | Audio
PCM1710UG4

PCM1710UG4 - 20-Bit Stereo DAC | Texas Instruments | Audio

Texas Instruments PCM1710UG4 is a 20-bit stereo delta-sigma digital-to-analog converter with dual voltage outputs, an integrated output amplifier, and a 28-pin SOIC package. The device operates from a nominal 5 V supply, draws no more than 70 mA, supports analog and digital supply connections, and is specified for -25 °C to +85 °C operation. Its published performance includes 92 dB THD+N, 98 dB dynamic range, and 8× digital oversampling. An audio DAC is a data-conversion IC that transforms digital PCM audio samples into left- and right-channel analog voltages. Within the broader hierarchy, PCM1710UG4 is a delta-sigma DAC, which belongs to the ADC/DAC and data-converter IC categories. Its stereo architecture, serial data interface, multi-level delta-sigma core, analog low-pass filter, and output amplifier consolidate several analog-audio signal-chain functions into one package. Key features include 20-bit resolution, dual voltage output, an 8× oversampling digital filter, and an integrated analog reconstruction low-pass filter. The 92 dB THD+N specification indicates low harmonic distortion and noise for stereo playback systems, while the 98 dB dynamic-range figure supports wide-level reproduction without requiring an unusually large output swing. The converter accepts both analog and digital supply rails and provides a maximum analog output voltage of 3.2 V. The PCM1710UG4 uses a serial interface and a delta-sigma conversion architecture. Its digital filter and analog low-pass section work together to reconstruct a continuous analog waveform from the oversampled digital stream. Because the converter includes an output amplifier, the system designer can evaluate the analog output stage as a complete functional block rather than treating the DAC as a bare conversion core. Typical applications include CD-player audio paths, digital audio equipment, stereo amplifier input stages, home-audio systems, and embedded audio products. Its 28-pin SOIC package supports conventional surface-mount assembly and tube packaging is identified for the ordered device. In a completed design, the useful operating region should be established with the 5 V nominal supply, the 70 mA maximum supply-current figure, and the 3.2 V maximum analog output condition. The primary design consideration is analog layout. Keep the digital clock and data traces away from the analog output pins, provide the bypass capacitors required by the application circuit, and route both analog and digital return currents deliberately. Headroom should also be checked because the published maximum analog output voltage of 3.2 V is below the nominal 5 V supply. This product record combines the published PCM1710UG4 specifications, package information, sourcing links, lifecycle indication, replacement analysis, and practical PCB guidance. It is intended to support direct comparison with related Texas Instruments converters while keeping unresolved electrical and pin-level details separate from confirmed product facts.

RFQ پەیوەندی
PCM1716E - 24-Bit 96 kHz Stereo Audio DAC | Texas Instruments
PCM1716E

PCM1716E - 24-Bit 96 kHz Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1716E is a 24-bit, 96 kHz sampling CMOS delta-sigma stereo audio digital-to-analog converter in a 28-pin SSOP package. The device accepts digital audio data through its I2S interface and is designed for stereo audio playback systems requiring a compact, high-resolution converter. Its 28-SSOP package supports surface-mount assembly while keeping the component count and board area low. A digital-to-analog converter, or DAC, is a signal-conversion IC that transforms digital audio samples into left- and right-channel analog voltage signals. The PCM1716E belongs to the delta-sigma DAC family, a CMOS architecture that uses multi-level noise shaping and digital filtering to produce an analog output suitable for audio amplifiers and line-output stages. Its stereo output architecture supports simultaneous left and right channels from one component. The PCM1716E provides 24-bit digital resolution and a sampling frequency range of 16 kHz to 96 kHz. The verified manufacturer description identifies support for standard, I2S, and left-justified data formats, giving designers flexibility across common audio source formats. Digital de-emphasis and independent left and right digital attenuation are also identified as device features, allowing software or system-level control of playback behavior. The converter architecture separates digital signal processing from analog output generation. Its digital interface accepts the bit clock, left-right clock, and serial data signals, while the analog section produces the stereo output. Independent channel attenuation is particularly useful in dual-mono equipment or systems that need separate level management for the two output channels. The CMOS implementation also aligns with modern low-power audio product design requirements. Typical applications include CD and DVD player analog output stages, digital audio amplifiers, home-theater receivers, active speakers, USB or network audio products, and compact digital audio equipment. For each application, the converter must be followed by an appropriate analog output stage and output filtering network, while the digital source must provide compatible clocking and data timing. When designing a PCB around the PCM1716E, verify the complete pin assignment and reference layout against the manufacturer datasheet before routing power, clocks, data, and analog outputs. Decoupling should be placed close to the supply pins, analog and digital return paths should be managed carefully, and the output network should preserve the converter's intended signal integrity. The available evidence does not provide the complete pin names, exact electrical limits, or a verified price ladder. This page consolidates the verified PCM1716E format, resolution, sampling-rate, interface, package, sourcing, and cross-reference information, while clearly separating unavailable electrical details from confirmed manufacturer features. It also provides application guidance, design notes, and a strict review of available drop-in replacement evidence.

RFQ پەیوەندی
PCM1716E/2K - 24-Bit 96kHz Stereo DAC | Texas Instruments
PCM1716E/2K

PCM1716E/2K - 24-Bit 96kHz Stereo DAC | Texas Instruments

The Texas Instruments PCM1716E/2K is a 24-bit, 96 kHz sampling CMOS delta-sigma stereo audio digital-to-analog converter with an I2S digital audio interface, packaged in a 28-SSOP housing measuring 5.30 mm wide. Designed for mid-range and high-grade digital audio equipment, it converts two channels of digital audio into analog stereo output while supporting audio data rates up to 24 bits and 96 kHz sampling. A digital-to-analog converter, or DAC, is an integrated circuit that reconstructs continuous analog voltage signals from digital audio samples. Within the signal-chain hierarchy, the PCM1716E belongs to the audio DAC class, connects a digital audio source such as a USB interface, decoder, or digital mixer to an analog output stage, and ultimately feeds amplifiers, headphone drivers, or line-level circuitry. This conversion stage determines the fidelity of the analog waveform presented to the downstream audio hardware. Key characteristics include a 24-bit resolution, a maximum stated sampling rate of 96 kHz, stereo output, CMOS construction, and an I2S serial interface. The I2S interface reduces the number of signal lines required when routing digital audio between devices, while the two-channel architecture supports conventional left-right stereo playback. The 28-SSOP package keeps the converter compact enough for consumer, multimedia, and professional audio boards. The PCM1716E/2K uses delta-sigma conversion technology, a CMOS-based architecture commonly used in modern digital audio converters. Delta-sigma converters shape quantization noise into the out-of-band region so that a digital reconstruction filter can remove it before the analog signal reaches the output stage. The converter accepts PCM-format digital audio and provides analog stereo outputs suitable for downstream amplification and filtering. Typical applications include CD and DVD player digital audio sections, home-theater and multimedia receivers, active speakers, digital mixing consoles, USB audio interfaces, consumer audio appliances, and sound-card designs. Its 96 kHz capability also suits professional and broadcast equipment operating at higher-than-CD sample rates when the associated system clock and reconstruction filtering are designed accordingly. Designers should follow the pin-description table and typical application circuits in the manufacturer datasheet when assigning the I2S interface, analog output filters, supply rails, and bypass capacitors. Decoupling capacitors should be placed close to the supply pins, and the analog output network must be matched to the intended line or headphone drive stage. Verify output compliance, clock requirements, and supported data formats for the exact system configuration before layout release. This page consolidates the device specifications, ordering details, sourcing information, and same-footprint family alternatives into a single engineering reference. It also adds application guidance, comparison parameters, and design notes that help shorten evaluation time while keeping the manufacturer datasheet as the controlling technical authority.

RFQ پەیوەندی
PCM1717E - 18-Bit 48 kHz Stereo DAC | Texas Instruments
PCM1717E

PCM1717E - 18-Bit 48 kHz Stereo DAC | Texas Instruments

Texas Instruments PCM1717E is a stereo audio digital-to-analog converter with 18-bit resolution, support for audio data up to 48 kHz, and a 20-pin SSOP package. The converter uses a delta-sigma DAC architecture with an 8X oversampling digital filter and a multilevel delta-sigma DAC followed by an analog low-pass filter. It provides two analog output channels for left and right stereo audio signals and accepts 18-bit input data according to the manufacturer datasheet. An audio DAC is a data-converter IC that transforms digital PCM audio samples into left- and right-channel analog voltages suitable for amplifiers, headphones, line outputs, or downstream audio-processing stages. Within the broader semiconductor hierarchy, the PCM1717E is an ADC/DAC and audio interface IC, while its delta-sigma implementation places it within digital-to-analog converters and sound-card signal-chain devices. Its 20-pin SSOP package provides a compact surface-mount form factor for multichannel consumer and industrial audio equipment. The principal verified features include complete stereo conversion, 18-bit input-data support, 48 kHz operation, 8X digital-filter oversampling, a multilevel delta-sigma DAC, and an analog low-pass filter. These functions integrate the essential digital decoding and analog reconstruction stages into one device. The two-channel architecture reduces the need for separate converters when a design must reproduce a standard stereo program. The 20-SSOP package measures 0.209 inches, or 5.30 mm, in body width according to the distributor listing. The PCM1717E combines a multi-level delta-sigma conversion stage with oversampled digital filtering. Digital filtering shapes the incoming PCM stream before conversion, while the analog low-pass filter suppresses high-frequency energy at the outputs. Because the supplied distributor and manufacturer-search data do not publish detailed dynamic-range, distortion, output-voltage, clock, power-supply, or channel-separation figures, those values remain unverified here and must be confirmed in the manufacturer datasheet before final analog, clock, or power-budget calculations are released. Typical uses include digital audio player boards, multimedia systems, active speakers, compact consumer stereo equipment, and embedded audio interfaces. Its stereo DAC function is also relevant to USB or legacy digital-audio subsystems where an I2S-compatible source must be converted into analog left and right outputs. The verified distributor description identifies the interface as I2S-capable, while exact supported formats and electrical limits should be checked against the relevant revision of the manufacturer datasheet. The primary design consideration is PCB implementation. The 20-pin SSOP footprint requires adequate copper, clean return paths, and correctly placed input and output capacitors; exact capacitor values, supported voltage rails, and output architecture must be taken from the datasheet rather than inferred. Clocking, digital-interface levels, analog grounding, and power sequencing should also be verified against the complete application circuit. This page combines verified distributor pricing and package information, manufacturer-datasheet feature statements, sourced drop-in cross-reference data, and engineering-focused selection guidance. It distinguishes verified facts from unavailable parameters so engineers can accelerate sourcing without treating unconfirmed electrical values as design guarantees.

RFQ پەیوەندی
PCM1717E/2K - 18-Bit Stereo Audio DAC | Texas Instruments
PCM1717E/2K

PCM1717E/2K - 18-Bit Stereo Audio DAC | Texas Instruments

Texas Instruments PCM1717E/2K is a stereo delta-sigma digital-to-analog converter for audio systems, featuring 18-bit resolution, 48 kHz operation, and I2S audio input in a 20-pin SSOP package. The device is designed for compact consumer and multimedia equipment requiring two-channel digital audio conversion with a straightforward serial interface. It accepts digital audio data through the I2S interface and provides analog stereo outputs for external amplification or line-level routing. A digital-to-analog converter, or DAC, converts sampled digital audio into corresponding analog voltage signals. Within the signal chain, the PCM1717E/2K belongs to the ADC/DAC and audio-interface hierarchy, where it bridges a digital audio source and an analog audio output stage. Its delta-sigma architecture is suited to audio applications in which a compact converter with integrated digital input and stereo analog outputs is preferable to a discrete codec implementation. The key specifications are 18-bit resolution, operation up to 48 kHz, two-channel conversion, and a 20-pin SSOP package. The verified manufacturer and distributor listings identify the device as an audio DAC with I2S input, while additional detailed electrical characteristics require confirmation from the manufacturer datasheet. The 20-pin surface-mount format supports compact PCB layouts, although analog and digital return paths still require careful routing. PCM1717E/2K is suitable for CD-player and digital-audio subsystems, consumer audio equipment, multimedia computers, set-top boxes, and other embedded audio products that use I2S-compatible digital audio sources. Its stereo output architecture simplifies system partitioning by placing conversion directly between the digital source and an analog amplifier or line input. When laying out the PCB, keep the digital input traces away from the analog output traces, use a continuous ground reference plane, and place the power and signal-conditioning components close to their associated pins. Confirm the required analog output network, bypass capacitors, power sequencing, and supported logic levels against the manufacturer datasheet before releasing a production layout. This product page combines the verified manufacturer and distributor listing information with package, application, replacement, and design guidance for engineers evaluating PCM1717E/2K. It also identifies the limitations of the available technical information so that footprint, pin, and electrical validation can be completed against the official datasheet.

RFQ پەیوەندی
PCM1717EG - 18-Bit Stereo Audio DAC | Texas Instruments
PCM1717EG

PCM1717EG - 18-Bit Stereo Audio DAC | Texas Instruments

Texas Instruments PCM1717EG is an 18-bit stereo audio digital-to-analog converter that accepts I2S serial audio data and supports sampling rates through 48 kHz. It is packaged in a 20-pin SSOP measuring 0.209 inch, or 5.30 mm, in width, and is supplied in a tube for through-hole production processes. The device also uses 8x oversampling according to the manufacturer documentation. An audio DAC is a signal-conversion IC within the broader digital-to-analog converter, audio interface, and mixed-signal semiconductor hierarchy. Its role is to convert digital audio samples into left- and right-channel analog voltage signals for subsequent amplification, filtering, line output, or another audio-processing stage. The PCM1717EG combines an 18-bit conversion format with a serial digital interface suited to audio systems operating at up to 48 kHz. The PCM1717EG accepts 18-bit input data and implements a complete stereo conversion function. Its 8x oversampling operation distinguishes it from a basic binary DAC by increasing the effective internal conversion rate relative to the incoming sample rate. The manufacturer documentation identifies both analog and digital supply sources, allowing system designers to separate the power domains used by the converter circuitry and its digital interface. The 20-pin SSOP package provides a compact surface-mount implementation with a body width of 5.30 mm. The package includes 20 terminals, and the PCM1717EG variant is packaged in a tube. This combination makes the device suitable for audio boards where a stereo DAC, defined digital interface, and separated analog and digital power connections are required within a limited board footprint. Typical uses include digital audio source equipment, compact stereo audio interfaces, and embedded audio products accepting I2S data. Its 18-bit resolution and 48 kHz capability make it most appropriate for designs whose source format and bandwidth requirements match those specifications. A replacement should be selected only after verifying the complete pinout, supply limits, clocking requirements, analog-output implementation, and package dimensions. Designers should follow the manufacturer datasheet when assigning analog and digital supply pins, decoupling capacitors, and routed outputs. Because this converter participates in a mixed-signal signal path, maintain separation between digital clock and data traces and sensitive analog output routing. The usable audio bandwidth and fidelity also depend on the external reconstruction network, output loading, reference quality, and analog stage following the DAC. This page organizes the exact PCM1717EG package, format, interface, and temperature information alongside verified drop-in candidates, application guidance, and PCB design considerations. It is intended to help engineers identify whether the device matches an audio architecture before beginning schematic capture, layout, sourcing, or production qualification.

RFQ پەیوەندی
PCM1718E - 18-Bit Stereo Audio DAC | Texas Instruments
PCM1718E

PCM1718E - 18-Bit Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1718E is an 18-bit stereo audio digital-to-analog converter with a 48 kHz I2S interface, 100 dB SNR, and 96 dB dynamic range, housed in a 20-pin SSOP package. It is designed for digital audio systems requiring a complete stereo DAC signal path with an integrated oversampling digital filter, multilevel delta-sigma DAC, analog low-pass filter, and output amplifier. The PCM1718E supports normal 18-bit input data and is identified by distributor listings as a 20-SSOP audio DAC. A digital-to-analog converter, or DAC, converts digital audio samples into an analog voltage suitable for amplifiers, speakers, headphones, or line-level audio equipment. In the audio IC hierarchy, the PCM1718E is a stereo DAC within the broader ADC/DAC and interface-device categories. Its integrated filtering and output circuitry reduce the number of external signal-chain components needed in conventional consumer audio designs. The verified data identifies 18-bit resolution, a 48 kHz sampling rate, and I2S data input for the PCM1718E. The manufacturer material and datasheet snippet also identify 100 dB SNR, 96 dB dynamic range, and approximately -90 dB THD+N performance. These figures position the device for CD-rate and related stereo audio applications where accurate reconstruction of the digital waveform is required. The 8-times oversampling digital filter and analog low-pass filter support conversion into a smooth analog output. Because the PCM1718E integrates a complete stereo DAC path, it can reduce design complexity in source equipment, portable audio products, digital mixers, and home-audio interfaces. Designers still need to confirm the exact pin functions, power-supply requirements, analog output configuration, clock format, and recommended external component values against the manufacturer datasheet before releasing a PCB. The 20-pin SSOP package is a surface-mount format with gull-wing leads. Package dimensions, pin spacing, thermal characteristics, and exposed-pad details were not included in the verified excerpts and therefore require confirmation from the full manufacturer datasheet. The PCM1718E is offered under both Texas Instruments and historical Burr-Brown branding in distributor records, reflecting the product's origin within Burr-Brown audio converter technology. This page combines the verified distributor identification, manufacturer performance highlights, package information, pricing availability notes, and application-specific engineering guidance. It also distinguishes verified facts from parameters that still require datasheet confirmation, helping engineers assess the PCM1718E without treating unavailable electrical, lifecycle, or compliance information as guaranteed.

RFQ پەیوەندی
PCM1718E/2K - 18-Bit Stereo Audio DAC | Texas Instruments
PCM1718E/2K

PCM1718E/2K - 18-Bit Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1718E/2K is an 18-bit, two-channel delta-sigma audio digital-to-analog converter with 100 dB SNR, 96 dB dynamic range, and -90 dB THD+N performance. It accepts I2S digital audio at up to 48 kHz and is packaged in a 20-pin SSOP (DB) surface-mount package. An audio DAC is a data converter that transforms digital audio samples into left- and right-channel analog voltage signals. The PCM1718 family integrates an 8-times oversampling digital filter, a multilevel delta-sigma DAC, an analog low-pass filter, and an output amplifier. This integrated signal chain supports audio equipment requiring separate stereo analog outputs without relying on discrete output stages. The PCM1718E/2K accepts normal 18-bit input data and supports stereo operation at 48 kHz. Its headline performance includes 100 dB signal-to-noise ratio, 96 dB dynamic range, and -90 dB total harmonic distortion plus noise. The integrated filtering and output-amplifier functions reduce the number of external analog components required in a conventional audio-output design. Technically, the device uses delta-sigma conversion with 8-times oversampling to push quantization noise away from the audio passband. A subsequent analog low-pass filter reconstructs a continuous analog waveform from the oversampled converter output, while the integrated output amplifier provides the final buffered analog drive stage. The result is a compact converter solution intended for high-fidelity stereo audio signal paths. Typical uses include CD-player and digital-audio decoding boards, multimedia equipment, home-theater audio modules, active speaker electronics, and other consumer or industrial products that require I2S-to-analog conversion. It is particularly appropriate when a design needs 18-bit and 48 kHz operation with integrated stereo DAC and output-amplifier functions. The principal design consideration is the analog output implementation. Follow the manufacturer’s application circuit for output-mode selection, analog biasing, and output filtering, and preserve a quiet ground and supply reference around the converter. The 20-pin SSOP package also requires a PCB footprint and layout that match the manufacturer’s DB-package drawing. This page combines the PCM1718E/2K ordering information, verified performance characteristics, package details, drop-in alternatives, and practical selection guidance. It is intended to help engineers identify whether the device fits an I2S stereo-audio design before beginning schematic and layout work.

RFQ پەیوەندی
PCM1718EG4 - 18-Bit Stereo Audio DAC | Texas Instruments
PCM1718EG4

PCM1718EG4 - 18-Bit Stereo Audio DAC | Texas Instruments

Texas Instruments PCM1718EG4 is an 18-bit stereo digital-to-analog converter with a 48 kHz sampling rate, an I2S digital interface, dual-channel audio output, and a 20-SSOP surface-mount package. The device operates from a 2.7 V to 5.5 V power supply and supports an operating temperature range of -25°C to +85°C. An audio DAC converts digital audio samples into analog voltage signals that can drive downstream amplifiers, speakers, headphones, or line-level circuitry. Within the broader signal-chain hierarchy, the PCM1718EG4 is a stereo audio D/A converter, which is a specialized form of ADC/DAC semiconductor used in digital audio equipment. Its I2S interface connects with a digital audio processor or audio codec while the converter performs the final digital-to-analog conversion stage. The primary specifications are 18-bit resolution, two audio channels, and a maximum sampling rate of 48 kHz. The 2.7 V to 5.5 V supply range allows operation from common low-voltage digital and analog rails. The 20-SSOP package provides a surface-mount implementation for compact consumer, communications, and industrial audio designs, while the specified -25°C to +85°C operating range supports moderate-temperature equipment. The PCM1718EG4 is identified as a delta-sigma stereo DAC, pairing a serial digital input stage with dual analog output channels. The I2S interface is designed for integrated digital audio systems where clock and serial-data signals arrive from an audio processor. Dual-channel operation supports standard stereo playback paths without requiring two separate converter packages. Its 25 mA supply-current figure and 3.1 V maximum analog output voltage provide useful constraints for analog-output, power-budget, and downstream-signal-chain design. Typical uses include stereo audio playback in consumer electronics, digital audio source equipment, multimedia systems, communications equipment, and embedded audio products. It is especially relevant where a 48 kHz sampling rate and 18-bit conversion are sufficient but a higher-resolution converter is unnecessary. The dual outputs can feed an audio amplifier or volume-control stage, while the I2S connection reduces the number of parallel digital signal lines required from the audio source. Designers should treat the analog and digital supply rails as separate implementation concerns. Place the device-side bypass capacitors close to its supply pins and keep the analog output routing away from noisy digital clock and serial-data paths. The 20-SSOP footprint requires careful land-pattern reproduction, while the 3.1 V maximum analog output voltage must remain below downstream amplifier input limits. This page organizes the PCM1718EG4 specifications, verified manufacturer documentation, sourcing information, functional application guidance, and the limited drop-in alternatives identified for the device. It also highlights design considerations that engineers can apply when evaluating this SoundPlus stereo DAC for an existing 20-SSOP audio subsystem.

RFQ پەیوەندی
PCM1719E - 18-Bit Stereo Audio DAC | Texas Instruments
PCM1719E

PCM1719E - 18-Bit Stereo Audio DAC | Texas Instruments

Texas Instruments PCM1719E is a 28-bit-package stereo audio digital-to-analog converter that accepts 18-bit audio data, operates with an I2S interface at 48 kHz, and is housed in a 28-pin SSOP package. The converter supports 8-times oversampling through its digital filter, uses a multi-level delta-sigma DAC and analog low-pass filter, and includes an on-chip headphone amplifier. Its specified dynamic range reaches 96 dB, signal-to-noise ratio reaches 100 dB, and total harmonic distortion plus noise is specified at -88 dB. A digital-to-analog converter, or DAC, converts digital audio samples into an analog voltage suitable for headphone, line-level, or downstream audio amplification. In the product hierarchy, the PCM1719E is a stereo audio DAC, which is an ADC/DAC interface IC and therefore part of the broader signal-conversion and semiconductor family. The integrated headphone output makes the device useful where a board requires an audio output stage without a separate analog-output amplifier. Key features include 18-bit input-data acceptance, complete stereo conversion, an 8-times oversampling digital filter, and a multi-level delta-sigma conversion architecture. The analog low-pass filter removes high-frequency content generated by the oversampling process before the signal reaches the output stage. The specified -88 dB THD+N and 100 dB SNR characterize the converter's distortion and noise performance, while the 96 dB dynamic-range figure indicates the span between specified minimum and maximum signal levels. The PCM1719E uses a 5 V supply according to the verified component data. Its digital audio connection is I2S, and the listed 48 kHz operating rate identifies the supported sampling configuration shown in the distributor listing. The 28-SSOP package has a stated width of 5.30 mm and a lead pitch of 0.209 inches. The package therefore belongs to the SSOP surface-mount family, although the verified source does not provide a complete verified pin list. Typical uses include digital-audio source boards, multimedia equipment, headphone outputs, compact consumer audio systems, and embedded audio products requiring a stereo I2S-to-analog conversion stage. An application should account for the converter's 5 V supply requirement, provide clean digital and analog supply routing, and use suitable output coupling and amplifier-interface components. The principal design consideration is separating analog and digital return paths to minimize converter noise while keeping the SSOP layout compact. Decoupling capacitors should be placed near the supply pins, and analog output routing should remain away from high-current digital return paths. The PCM1719E is appropriate when its documented I2S interface, 48 kHz format, 5 V supply, converter performance, and integrated headphone capability match the system. This product record combines the verified distributor specifications, package information, source links, interface details, and application guidance. It also distinguishes the PCM1719E from devices with similar functions but different timing, supply, or package requirements, helping engineers avoid substitutions that are not true pin-to-pin replacements.

RFQ پەیوەندی
PCM1719E/2K - 18-Bit Stereo Audio DAC | Texas Instruments
PCM1719E/2K

PCM1719E/2K - 18-Bit Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1719E/2K is an 18-bit stereo audio digital-to-analog converter with I2S digital audio input, 48 kHz sample-rate support, and integrated phone-amplifier capability in a 28-pin SSOP package. The converter uses a two-channel delta-sigma architecture to generate left- and right-channel analog audio from a digital audio stream. An audio DAC is a data-conversion integrated circuit that converts digital audio samples into voltage signals suitable for headphones, speakers, or downstream analog amplification. Within the broader signal-chain hierarchy, it belongs to the digital-to-analog converter class, the audio converter category, and ultimately the mixed-signal and analog semiconductor families. Its two-channel architecture supports stereo playback systems without requiring two separate converter packages. The PCM1719E/2K provides 18-bit resolution, a maximum analog output voltage of 3.1 V, and a maximum supply current of 25 mA. Its I2S interface is suited to digital audio sources such as audio processors, decoders, and microcontrollers. The listed maximum linearity error is 5%, while its 28-terminal gull-wing SSOP package supports conventional surface-mount PCB assembly. The /2K ordering suffix identifies the tape-and-reel configuration used for automated production handling. Its delta-sigma conversion architecture is appropriate for compact consumer-audio equipment because it combines a multichannel digital input with analog stereo outputs in one package. The PCM1719E/2K includes circuitry associated with headphone or phone-amplifier use, reducing the number of separate analog-output stages needed in a conventional portable-audio design. The 48 kHz operating point is suitable for CD-rate digital audio and other standard-rate playback systems. Typical applications include stereo headphone outputs in portable media equipment, auxiliary digital-audio inputs in home-audio products, telephone and communications audio paths, and embedded systems requiring a small multichannel DAC. In these systems, the I2S interface connects the converter to a digital audio processor, while the analog outputs feed an amplifier, mixer, or headphone driver stage. Designers should preserve the analog-output topology and pin assignments defined by the manufacturer datasheet when replacing an existing PCM1719E implementation. Power and output filtering must follow the reference circuit, and unused digital inputs should be handled according to the pin-description table. The 28-pin SSOP footprint should be checked against the PCB library because pin numbering and exposed thermal or lead geometry are critical for drop-in replacement decisions. This product record combines the converter’s key electrical and packaging attributes with a direct family cross-reference, application guidance, and PCB-focused replacement notes. It is intended to help engineers identify the correct audio DAC, validate legacy-board replacement, and plan a compliant stereo-audio design without treating a superficially similar converter as a drop-in part.

RFQ پەیوەندی