بەرهەمەکان (3,600+)

PCM1794DB-BB 24-Bit 192kHz Stereo DAC | Texas Instruments
PCM1794DB-BB

PCM1794DB-BB 24-Bit 192kHz Stereo DAC | Texas Instruments

The Texas Instruments PCM1794DB-BB is a 24-bit, 192-kHz sampling stereo digital-to-analog converter with a 132 dB signal-to-noise ratio, housed in a 28-lead SSOP package. It accepts I2S, PCM, and left-justified digital audio formats and uses advanced segment DAC architecture to provide high dynamic performance and improved tolerance to clock jitter. A digital-to-analog converter, or DAC, is an integrated circuit that converts digital audio samples into proportional analog voltage or current signals. The PCM1794 belongs to the stereo DAC hierarchy within audio conversion ICs, where it supports bridges between digital audio sources, analog output stages, amplifiers, headphones, and loudspeakers. Its balanced current outputs allow the analog circuitry to be optimized for either balanced or single-ended signal paths. The principal features of the PCM1794 include 24-bit resolution, operation up to 192 kHz, stereo balanced current outputs, hardware control, and a stated 132 dB SNR. These characteristics support high-resolution audio paths where channel separation, low distortion, and accurate reproduction of digital source material are important. The converter uses data-weighted averaging to reduce noise caused by DAC element mismatch and includes a third-order delta-sigma modulator as part of its digital signal-processing architecture. The PCM1794 is a monolithic CMOS integrated circuit containing two stereo digital-to-analog converter channels and associated support circuitry. Its advanced segment DAC architecture improves dynamic performance while reducing sensitivity to clock jitter. The 28-SSOP package provides a compact surface-mount option for digital audio equipment, while current outputs provide flexibility in the design of the subsequent analog conversion and output-amplifier stages. Typical uses include high-resolution CD and DVD player digital output sections, professional audio interfaces, digital mixing consoles, broadcast equipment, sound-card output stages, and premium home-audio products. It can also serve as a reference-quality digital-to-analog stage in equipment that accepts an I2S source and requires a balanced analog output. The system clock, digital input routing, analog output network, and output amplifier must be designed together to preserve the converter's intended performance. Layout is especially important because this device converts high-resolution digital audio into a low-level analog signal. Place the digital interface and analog output components according to the manufacturer datasheet, keep return-current paths controlled, and use suitable filtering for the selected output topology. Component tolerances, clock quality, grounding, and connector implementation can materially affect the final signal-to-noise and distortion performance. This page combines the manufacturer's core PCM1794 specifications with a package-oriented view of sourcing and replacement. It identifies a directly related 28-SSOP option, summarizes the technical constraints that matter during PCB design, and distinguishes the PCM1794DB-BB from other stereo DACs that may share a package without sharing a pin-compatible interface.

RFQ پەیوەندی
PCM1794DBR - 24-Bit 192 kHz Stereo Audio DAC | Texas Instruments
PCM1794DBR

PCM1794DBR - 24-Bit 192 kHz Stereo Audio DAC | Texas Instruments

Texas Instruments PCM1794DBR is a 24-bit, 192 kHz sampling stereo digital-to-analog converter with hardware control, designed for high-performance audio signal chains. The device supports I2S digital audio input and is packaged in a 28-lead SSOP package. According to the Texas Instruments product page, the PCM1794 family provides 132 dB SNR, making it suitable for demanding audio DAC, digital preamplifier, and multimedia audio applications. The PCM1794DBR combines a stereo DAC architecture with support circuitry in a compact surface-mount package intended for audio equipment requiring high-resolution conversion and precise output control. A digital-to-analog converter, or DAC, is an integrated circuit that converts digital audio samples into continuous analog voltage signals. The PCM1794 belongs to the broader digital-to-analog converter category within data-converter and audio IC families. Its stereo architecture produces left and right analog outputs from a digital audio stream, while the 24-bit resolution and 192 kHz sampling capability support high-resolution playback formats. In a complete audio system, the DAC typically sits between a digital audio source, such as a transport, streamer, USB interface, or digital mixer, and the analog output stage. Key features include 24-bit resolution, sampling rates up to 192 kHz, I2S digital audio support, stereo operation, and 132 dB SNR. The 28-lead SSOP package provides the physical interface for digital data, clock signals, control signals, analog outputs, and power connections. These characteristics make the converter useful in CD-quality playback systems as well as higher-resolution audio equipment. Hardware control allows system designers to adjust operating behavior through external control signals rather than relying exclusively on software registers. The PCM1794 is a monolithic CMOS integrated circuit that includes stereo digital-to-analog converters and associated support circuitry. Its architecture is intended to provide a straightforward digital-audio-to-analog conversion stage while preserving the dynamic-range capability required by premium audio products. The converter can be paired with a high-quality output filter, headphone amplifier, line amplifier, or analog preamplifier to create a complete playback path. System clocking and digital-interface timing remain important design considerations, so the manufacturer datasheet should be used for signal timing, pin connections, and recommended application circuits. Typical applications include high-resolution audio DAC boards, CD and DVD player designs, network audio players, digital mixing consoles, active speakers, professional audio equipment, and multimedia systems. The 132 dB SNR figure is particularly relevant when minimizing converter-generated noise and preserving dynamic range. For designs requiring a very low-noise analog output, the DAC should be followed by appropriately designed analog stages and power-supply arrangements that do not degrade the converter's performance. When designing around the PCM1794DBR, place decoupling capacitors close to the power pins and route digital clock and data signals away from sensitive analog output paths. Confirm the device's pin names and connection requirements against the Texas Instruments datasheet before layout release. The most important selection trade-off is whether the application requires the PCM1794's 24-bit, 192 kHz stereo performance and hardware control, or whether a related device with different filter, output, or clock characteristics would better match the product architecture. This product page combines the Texas Instruments PCM1794 specifications with practical application guidance, comparison criteria, package information, and drop-in replacement notes. It is intended to help engineers evaluate the PCM1794DBR for audio DAC and signal-chain designs, while directing detailed sourcing and current commercial questions to the Request a Quote workflow.

RFQ پەیوەندی
PCM1795DB - 32-Bit 192kHz Stereo DAC | Texas Instruments
PCM1795DB

PCM1795DB - 32-Bit 192kHz Stereo DAC | Texas Instruments

Texas Instruments PCM1795DB is a 32-bit, 192kHz sampling, Advanced Segment stereo audio digital-to-analog converter in a 28-pin SSOP package. It provides two DAC channels with a typical signal-to-noise ratio of 123 dB, accepts PCM and DSD audio data, and supports I2C, SPI, and TDM control interfaces. Its analog output stage operates from a 4.75V to 5.25V supply. An audio DAC is a signal-conversion IC that transforms digital audio samples into left and right analog voltage signals. The DAC hierarchy includes audio converters, digital-to-analog converters, and interface ICs. This function allows digital audio sources, such as streaming systems, CD players, and network audio equipment, to drive analog amplifiers, powered speakers, headphones, and line-level audio stages. The PCM1795DB uses Texas Instruments Advanced Segment DAC architecture to combine 32-bit data handling with 192kHz sampling capability. Its typical 123 dB SNR supports high-resolution audio reproduction, while the two-channel output avoids requiring separate DAC devices for stereo playback. Serial control through I2C, SPI, or TDM provides flexibility for system integration and configuration. The PCM1795DB accepts digital audio formats identified as PCM and DSD, making it suitable for designs that process conventional digital streams as well as DSD-compatible source signals. Its 28-pin SSOP package supports compact, surface-mount assembly. The 4.75V to 5.25V analog supply range is suitable for conventional 5V audio output stages, while the separate digital supply supports a 3.3V operating condition in the manufacturer test configuration. Typical applications include high-resolution stereo audio DAC boards, CD and SACD player upgrades, network audio systems, digital mixing consoles, and headphone amplifier front ends. The component is also appropriate for powered speakers requiring a clean analog line output. Designers should pair it with a suitable analog output filter, low-noise clocking, decoupled supply rails, and an output amplifier selected for the target impedance. Power-supply implementation is critical because the DAC performance depends on clean reference and analog rails. Place the manufacturer's recommended bypass capacitors close to the supply pins and keep digital clock and data routing away from the analog outputs. Keep the output path short, observe the analog and digital grounding strategy in the datasheet, and avoid adding circuitry that can compromise the converter's dynamic performance. This page organizes the PCM1795DB specifications, application guidance, package information, and verified same-family alternatives. It also provides practical design notes for filtering, layout, power delivery, and output-stage integration, helping engineers evaluate the converter before beginning a high-performance audio design.

RFQ پەیوەندی
PCM1795DBR - 32-Bit Stereo Audio DAC | Texas Instruments
PCM1795DBR

PCM1795DBR - 32-Bit Stereo Audio DAC | Texas Instruments

Texas Instruments PCM1795DBR is a 32-bit, 192 kHz sampling stereo audio digital-to-analog converter with two balanced current outputs, housed in a 28-pin SSOP package. It uses advanced segment DAC architecture, supports DSD playback up to 200 kHz, and operates from a 5 V analog supply with a 3.3 V digital supply. A stereo audio DAC converts digital PCM, I2C, SPI, or TDMCA audio data into left- and right-channel analog signals. Within the signal-chain hierarchy, the PCM1795 belongs to the DAC family of audio converters, which supports playback from digital sources, home-theater equipment, professional audio hardware, and network-audio systems. Its dual-channel architecture provides separate analog outputs for balanced stereo audio paths. The converter resolves 32-bit input data and supports sampling rates through 192 kHz. Its advanced segment architecture is designed for high dynamic performance and improved tolerance to clock jitter. Manufacturer test conditions specify 5 V for VCC1, VCC2L, and VCC2R, 3.3 V for VDD, a 48 kHz sampling rate, a 256 fS system clock, and 32-bit data. The PCM1795DBR provides two balanced current outputs, allowing the analog signal path to be optimized for the selected output implementation. Its stated dynamic-performance value includes 123 dB typical signal-to-noise ratio and 123 dB typical common-mode rejection. These characteristics make the device suitable for precision digital-to-analog conversion where channel separation and low-level noise are important. Typical uses include high-resolution stereo audio playback, CD and network-player output stages, USB-audio interfaces, and professional audio equipment. A designer can also use the converter in DSD-capable equipment because the manufacturer lists support for DSD playback at up to 200 kHz. Balanced outputs simplify matching between the converter and downstream differential analog stages. The principal design task is implementing a low-noise analog output network around the current outputs. Supply routing, output-stage components, clocking, grounding, and digital-interface isolation should follow the manufacturer datasheet. Because the converter contains analog and digital domains, separating noisy digital return paths from sensitive output references is as important as selecting suitable supply bypassing components. This product page combines the manufacturer's architecture description with package, interface, supply, and performance details, then organizes replacement guidance and practical design considerations for engineers evaluating the PCM1795DBR.

RFQ پەیوەندی
PCM1796DB - 24-Bit 192 kHz Stereo DAC | Texas Instruments
PCM1796DB

PCM1796DB - 24-Bit 192 kHz Stereo DAC | Texas Instruments

Texas Instruments PCM1796DB is a 24-bit stereo audio digital-to-analog converter with a sampling rate of 192 kHz, 123 dB SNR, balanced current outputs, and a 28-lead SSOP package. It uses TI's advanced segment DAC architecture to provide strong dynamic performance and improved tolerance to clock jitter for high-fidelity audio systems. An audio DAC is a data-conversion IC that transforms digital PCM samples into analog current signals suitable for a downstream operational amplifier, reconstruction filter, or speaker system. Within the semiconductor hierarchy, a DAC belongs to the ADC/DAC class of data-converter ICs. The PCM1796DB is designed for stereo audio conversion where signal fidelity, channel balance, and compatibility with digital audio interfaces are primary design considerations. The converter supports 24-bit resolution and operation up to 192 kHz, while the listed DSD capability reaches 200 kHz. Its 123 dB signal-to-noise ratio supports low-noise conversion in demanding listening equipment. Balanced current outputs provide a flexible analog architecture, allowing the designer to optimize the external amplifier and filtering stages. Software control supports configurable system behavior when the DAC is managed by an audio controller or digital audio interface. Internally, the PCM1796DB combines stereo digital-to-analog converters and support circuitry in one monolithic CMOS device. The segment DAC architecture separates the conversion function into smaller segments, improving dynamic behavior and reducing sensitivity to timing errors in the digital audio stream. This architecture is particularly useful in designs where incoming clock jitter could otherwise affect the analog output. Typical applications include high-resolution CD and DVD audio players, network audio receivers, digital music systems, professional audio equipment, home-theater processors, and multichannel audio platforms. The balanced current-output topology can support transformer-balanced or line-level single-ended outputs when paired with suitable external circuitry. The converter is especially appropriate when a design requires 24-bit resolution and high sampling rates without using an external discrete DAC architecture. The principal design consideration is the analog output stage. Because the device produces current rather than a finished voltage, component selection, current-to-voltage conversion, ground treatment, and reconstruction filtering directly influence sound quality. Place the DAC, its digital interface components, and the analog output circuitry according to the pin descriptions and application information in the manufacturer datasheet. Maintain the stated supply ranges of 3 V to 3.6 V and 4.75 V to 5.25 V. This product page combines manufacturer specifications, application guidance, package information, and compatibility considerations for engineers evaluating the PCM1796DB. It also highlights the significance of its segment DAC architecture, 123 dB SNR, 192 kHz sampling capability, and 28-pin SSOP implementation when planning a high-fidelity audio converter stage.

RFQ پەیوەندی
PCM1796DBR - 24-Bit 192kHz Stereo Audio DAC | Texas Instruments
PCM1796DBR

PCM1796DBR - 24-Bit 192kHz Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1796DBR is a 24-bit, 192 kHz sampling stereo audio digital-to-analog converter built on TI's advanced segment DAC architecture, housed in a 28-lead SSOP (DBR) package. It delivers balanced current outputs, digital filtering, programmable gain and DSD-compatible operation for high-fidelity audio equipment. A DAC (digital-to-analog converter) is an audio-class signal-chain IC that reconstructs a continuous analog voltage or current waveform from a digital bitstream. As a member of the broader digital-to-analog converter family, the PCM1796 belongs to the ADC/DAC category of data converters, which sit between digital audio transports and analog amplification stages, ultimately forming part of a power-management- and signal-integrity-managed audio system. Its balanced current-output topology is the classical high-end audio architecture because current-output DACs are far less sensitive to voltage-reference drift and to clock jitter than voltage-output devices. Key features include 24-bit resolution at up to 192 kHz sampling, an advanced segment DAC core for low distortion, a jitter-tolerant three-wire serial interface for left/right clock, bit clock and data, programmable output gain, selectable digital filters and support for Direct Stream Digital streams up to 200 kHz DSD. Dynamic performance is characterized by very low total harmonic distortion plus noise and high signal-to-noise ratio, with the datasheet measurement conditions defined by a 20 Hz high-pass filter and a 20 kHz AES17 low-pass filter. Internally, the data converters use TI's advanced segment DAC architecture, which divides the conversion into multiple current-steering segments to reduce the glitch energy generated at each code transition. That segmentation, combined with the jitter-insensitive data latch, is why the PCM1796 is commonly selected for CD, DVD, SACD, network and USB audio products where inter-channel and inter-sample errors are audible. Analog outputs are provided as differential current pairs so designers can balance each channel in the analog domain or drive a single-ended stage. Typical applications include CD and DVD player digital output stages, SACD and optical-disc player DAC sections, network audio streamers, USB and computer audio interfaces, digital mixing consoles, headphone amplifier front ends and multi-channel home cinema audio processors. The balanced outputs pair naturally with the analog stages found in these systems. When designing around the PCM1796DBR, treat the analog output as a current source: the output must be terminated by an I-to-V conversion stage, usually a resistor load plus an operational amplifier, and the load impedance directly shapes the achievable output voltage and distortion. Keep the digital interface short, provide a clean low-noise supply, and observe the recommended decoupling so clock jitter and supply ripple do not dominate the converter's own noise floor. This page consolidates the manufacturer specifications, a structured drop-in replacement set drawn from the same TI stereo-DAC family, and practical analog and layout guidance that a datasheet alone does not present in engineering-decision form.

RFQ پەیوەندی
PCM1798DB - 24-Bit Stereo Audio DAC | Texas Instruments
PCM1798DB

PCM1798DB - 24-Bit Stereo Audio DAC | Texas Instruments

Texas Instruments PCM1798DB is a 24-bit stereo digital-to-analog converter with a sampling rate of 200 kHz, balanced current outputs, and a 28-lead SSOP package. The monolithic CMOS device uses TI advanced segment DAC architecture to provide strong dynamic performance and improved tolerance to clock jitter, making it suitable for high-fidelity audio conversion and other precision signal-generation systems. An audio DAC is a signal-conversion integrated circuit that transforms digital audio samples into an analog voltage or current waveform. The PCM1798 belongs to the DAC and data-converter hierarchy within integrated circuits and broader signal-processing semiconductors. Unlike a digital-to-analog function implemented in a general-purpose codec, this device focuses on stereo conversion, digital filtering, clocking, and support circuitry for high-quality audio outputs. The converter provides 24-bit resolution, a 200 kHz maximum sampling rate, and differential current output. Its dynamic range reaches 123 dB, while total harmonic distortion plus noise is specified at 0.0005%. The digital filter offers 98 dB stop-band attenuation and pass-band ripple of ±0.0002 dB. An eight-times oversampling architecture supports these filtering and conversion characteristics. System-clock operation includes 128-times, 192-times, 256-times, 384-times, 512-times, and 768-times sampling rates with autodetection. Supporting these clock ratios allows the PCM1798DB to interface with a broad range of digital audio transports while adapting to the incoming audio rate. Balanced current outputs support direct-to-differential output-stage designs, including transformer-coupled and active analog output paths. Typical applications include high-resolution CD and DVD audio players, professional digital mixing consoles, digital broadcast monitoring equipment, high-end headphone and line-level converters, studio preamplifiers, and dedicated stereo digital-to-analog decoding modules. Its 28-lead SSOP package also supports board layouts that prioritize mature through-hole assembly and serviceability. PCB design should keep digital-clock and audio-data routing away from the analog output network. The output stage must convert the converter's differential current into a usable analog voltage, so component selection, grounding, and channel balance are as important as the DAC itself. Review the manufacturer's pin description and application information before assigning tracks or choosing external circuitry. This product record combines the manufacturer's architecture and performance information with practical considerations for output-stage design, clocking, filtering, and PCB implementation. It also distinguishes verified functions from parameters that require design confirmation, helping engineers evaluate the PCM1798DB without confusing headline resolution with complete end-to-end audio performance.

RFQ پەیوەندی
PCM1800E - 20-Bit 48 kSPS Stereo ADC | Texas Instruments
PCM1800E

PCM1800E - 20-Bit 48 kSPS Stereo ADC | Texas Instruments

The Texas Instruments PCM1800E is a 20-bit stereo analog-to-digital converter (ADC) with single-ended analog inputs, a maximum sampling rate of 48 kSPS, a 4.5 V to 5.5 V supply range, and a 24-pin SSOP package. It converts two analog input channels into digital data and is intended for cost-sensitive consumer audio equipment. According to the Texas Instruments PCM1800 product page, the converter uses a delta-sigma modulator, 64-times oversampling, a digital decimation filter, and a serial interface supporting master and slave modes. An ADC is a mixed-signal semiconductor that converts continuously varying analog voltages into numerical values suitable for digital processing. The PCM1800 belongs to the delta-sigma ADC family and the broader data-converter and signal-processing IC hierarchy. Its single-ended inputs simplify source connections when the signal source can be referenced adequately against the converter's analog ground. Digital audio equipment commonly uses this architecture to support CD-compatible 44.1 kSPS and 48 kSPS playback or recording rates. Key features of the PCM1800E include dual 20-bit monolithic conversion, single-ended voltage inputs, 64-times oversampling, and four supported data formats. The decimation filter has a stated passband ripple of ±0.05 dB and stopband attenuation of -65 dB. The reported signal-to-noise ratio is 95 dB, making the device relevant to audio preamplifiers, consumer receivers, digital mixers, and other systems requiring stereo audio capture at 48 kSPS. The delta-sigma architecture converts the analog signal through oversampling and digital filtering before producing the final serial output. PCM1800 documentation identifies both master and slave operating modes, allowing the converter either to generate the serial clock or synchronize it with an external audio processor. Four data formats provide design flexibility when connecting the ADC to codecs, digital audio processors, microcontrollers, or programmable logic. The serial interface and decimation filter therefore form the boundary between the analog audio inputs and the digital signal path. Typical PCM1800E applications include stereo consumer audio capture, digital recording equipment, audio mixer inputs, consumer media systems, and digital signal processing front ends. In a typical signal chain, a stereo source is buffered, level-shifted into the ADC input range, sampled by the delta-sigma modulator, decimated, and transferred to a digital audio processor through the serial interface. The 48 kSPS rate supports professional audio-standard sampling rates but does not itself provide the analog front-end gain, anti-alias filtering, clock generation, or output audio processing required by a complete system. A key design consideration is preserving signal integrity at the single-ended analog inputs and the digital serial interface. Input routing should minimize noise pickup, keep the analog and digital return paths controlled, and account for the converter's input voltage range. Clock and data traces require suitable timing margins, while bypass capacitors should be placed close to the supply pins. The SSOP-24 package is suitable for compact designs, but its lead pitch and exposed analog, digital, and supply connections demand careful layout and assembly. This page consolidates the verified PCM1800 family specifications, source links, application guidance, and replacement-status analysis into one engineering-focused reference. It also separates published facts from unavailable details so designers can identify what must still be confirmed in the manufacturer datasheet before schematic release, PCB layout, or production qualification.

RFQ پەیوەندی
PCM1801U - 16-Bit Stereo Audio ADC | Texas Instruments
PCM1801U

PCM1801U - 16-Bit Stereo Audio ADC | Texas Instruments

The Texas Instruments PCM1801U is a 16-bit, stereo, single-ended audio analog-to-digital converter with a 48 kSPS conversion rate, 64-times oversampling, and a serial interface, housed in a 14-pin SOIC package. It is designed for cost-sensitive consumer audio equipment where a compact stereo converter with typical 93 dB SNR and -88 dB THD+N performance is required. An audio ADC is a mixed-signal semiconductor that converts left- and right-channel analog voltages into digital sample data for processing, storage, or transmission. The PCM1801 belongs to the ADC and DAC hierarchy, uses a delta-sigma modulator and digital decimation filter, and supports slave-mode operation with two serial data formats. This architecture provides a practical bridge between analog audio sources and digital audio systems. Key features include dual 16-bit monolithic conversion channels, single-ended analog voltage inputs, 64-times oversampling, a 48 kSPS maximum sampling rate, and a serial output interface. The decimation filter has a specified passband ripple of ±0.05 dB and stopband attenuation of -65 dB. Typical signal-chain performance includes THD+N of -88 dB, SNR of 93 dB, and dynamic range of 93 dB. Internally, the PCM1801 uses a delta-sigma modulator followed by a digital decimation filter to reduce aliasing and shape quantization noise. Its serial interface supports slave operation and two data formats, giving the system designer flexibility in clocking and data framing. The single-ended inputs simplify source interfacing, although input filtering, grounding, and source impedance remain critical to achieving the stated audio performance. Typical uses include consumer digital audio equipment, stereo recording products, USB audio interfaces, set-top boxes, and other compact audio systems requiring two analog inputs and a serial digital interface. The 48 kSPS rate aligns with standard CD-rate audio, while the 14-pin SOIC package simplifies assembly in cost-sensitive designs. When laying out the circuit, place input and decoupling capacitors close to their associated pins, maintain a low-impedance ground return for the analog section, and route serial clock and data traces away from sensitive analog inputs. Verify the external interface voltage levels and serial timing before connecting the converter to a host processor. This product page consolidates verified manufacturer and distributor information, price context, package details, application guidance, and substitution limitations. It distinguishes documented specifications from missing data and avoids presenting electrically different converters as guaranteed drop-in replacements.

RFQ پەیوەندی
PCM1802DB - 24-Bit 96 kHz Stereo Audio ADC | Texas Instruments
PCM1802DB

PCM1802DB - 24-Bit 96 kHz Stereo Audio ADC | Texas Instruments

Texas Instruments PCM1802DB is a high-performance stereo audio analog-to-digital converter with single-ended analog inputs, 24-bit resolution, and a maximum sampling rate of 96 kHz. It is packaged in a 20-SSOP package and is designed for digital audio capture systems requiring separate analog and digital supply rails. An audio ADC converts left and right analog audio signals into digital sample data for transmission, recording, processing, or playback. The PCM1802DB uses a delta-sigma modulator with 64-times or 128-times oversampling, followed by a digital decimation filter and a high-pass filter that removes the DC component from the input signal. This architecture is part of the broader analog-to-digital converter, data-converter, signal-processing, and semiconductor hierarchy. The device provides two single-ended analog input channels, a 24-bit conversion resolution, and a serial digital interface. Its analog supply operating range is 2.7 V to 3.6 V, while the digital supply range begins at 4.5 V according to the manufacturer product information. The 96 kHz sampling rate supports professional and consumer audio acquisition, including line-level stereo capture and digital audio recording. The PCM1802DB is intended for audio interfaces, USB audio bridges, digital mixers, sound-card designs, broadcast equipment, and other systems that convert analog stereo audio into digital data. Its single-ended inputs simplify source connections compared with differential-input converters, although circuit design must still address analog signal conditioning, filtering, grounding, and digital-interface compatibility. The 20-SSOP package requires careful PCB layout around the analog and digital sections. The manufacturer datasheet should be used as the authority for decoupling values, clock requirements, supported master and slave operating modes, pin assignments, and digital timing. This page combines the manufacturer product information with practical application guidance, engineering comparisons, and sourcing-oriented details.

RFQ پەیوەندی
PCM1803ADBR - 24-Bit 96kHz Stereo ADC | Texas Instruments
PCM1803ADBR

PCM1803ADBR - 24-Bit 96kHz Stereo ADC | Texas Instruments

The Texas Instruments PCM1803ADBR is a 24-bit, 96 kHz stereo delta-sigma analog-to-digital converter with single-ended analog inputs, housed in a 20-pin SSOP package. It supports 64-times and 128-times oversampling, digital decimation, and an on-chip high-pass filter that removes DC components from the input signal. Master and slave operating modes provide flexibility when connecting the converter to a digital audio system. An audio ADC is an interface IC that converts left- and right-channel analog voltages into a digital sample stream suitable for processing by a digital audio controller, DSP, codec, or storage system. The PCM1803 belongs to the delta-sigma ADC family and combines a modulator, oversampling stage, decimation filter, and high-pass filter in one integrated circuit. Its single-ended input architecture simplifies designs in which the source can drive a ground-referenced signal without a balanced-input front end. The principal specifications are 24-bit resolution, a maximum sampling rate of 96 kHz, stereo operation, and 20-pin SSOP packaging. The converter accepts a 3 Vp-p single-ended input range according to the manufacturer information. Oversampling at 64 times or 128 times moves quantization noise away from the audio band, while the digital decimation filter converts the high-rate modulator output into the required audio data stream. The integrated high-pass filter helps prevent DC offset from consuming dynamic range. The PCM1803A uses a delta-sigma modulator and CMOS process technology. Its digital interface supports serial audio transfer and selectable master or slave operation. Master mode is useful when the converter supplies the audio clock, whereas slave mode allows an external audio system to control the timing. These operating options allow the device to serve as the central converter in a compact audio subsystem or as a slave peripheral in a multi-component digital audio design. Typical uses include consumer audio equipment, USB or portable audio interfaces, digital mixers, sound-card front ends, digital recording equipment, and industrial audio capture systems. The 24-bit word length provides substantially higher nominal resolution than conventional 16-bit CD audio, while the 96 kHz sampling rate supports professional and high-resolution audio conversion requirements. The integrated high-pass filter is particularly useful when analog source offsets must be removed before downstream amplification or storage. Design the analog input path for low noise and adequate headroom. Keep input traces short, use a stable low-noise reference arrangement as specified by the manufacturer, and provide clean analog and digital supply paths. The serial clock, data, and control traces should be routed away from sensitive input nodes. Master or slave mode must be selected so that clock ownership is unambiguous, because incompatible clock arrangements can cause data corruption or nonstandard sampling behavior. This product page organizes the principal PCM1803ADBR specifications, package information, practical application guidance, and qualified replacement analysis. It also distinguishes true same-footprint candidates from broader audio-converter choices, helping engineers make a pin-level and signal-interface decision before committing a PCB layout to production.

RFQ پەیوەندی
PCM1803DB - 24-Bit 96-kHz Stereo ADC | Texas Instruments
PCM1803DB

PCM1803DB - 24-Bit 96-kHz Stereo ADC | Texas Instruments

The Texas Instruments PCM1803DB is a 24-bit, 96-kHz stereo delta-sigma analog-to-digital converter with single-ended analog voltage inputs, housed in a 20-pin SSOP package. It accepts 3 Vp-p input signals, uses 64-times or 128-times oversampling, and supports both master and slave operating modes. The converter is designed for cost-sensitive consumer audio systems operating from a 5 V analog supply and a 3.3 V digital supply. An audio ADC is an integrated circuit that converts left- and right-channel analog audio voltages into digital data for processing, storage, transmission, or playback. PCM1803DB belongs to the ADC/DAC class of data-conversion ICs and uses a delta-sigma modulator followed by a digital decimation filter. An integrated high-pass filter removes the DC component of the input signal, while master and slave mode support allows the converter to operate within different system clocking arrangements. The principal features are 24-bit resolution, a maximum sampling rate of 96 kHz, stereo single-ended input, and selectable 64-times or 128-times oversampling. Its serial interface supports audio-system integration, and the single-ended input architecture is useful when the source has a relatively simple single-ended output stage. The converter is fabricated using a CMOS process and is offered in a compact 20-pin SSOP package suited to cost-sensitive consumer audio equipment. PCM1803DB is positioned between basic codec functions and more complex audio-conversion solutions. The delta-sigma architecture moves much of the signal-shaping and filtering work into the digital domain, while the decimation and high-pass filters reduce unwanted DC content and aliasing components before the final digital data is presented. System designers still need to provide correct analog and digital supplies, suitable input conditioning, a supported serial clock configuration, and decoupling close to the device pins. Typical uses include consumer stereo audio equipment, digital recording systems, multimedia appliances, and compact audio interfaces requiring two single-ended analog channels. Its 96-kHz conversion rate supports high-resolution digital-audio workflows, while the 5 V analog and 3.3 V digital supply arrangement can simplify mixed analog and digital system design. Its 24-bit output resolution also provides more numerical headroom than lower-resolution converters when downstream gain staging is carefully controlled. For a robust implementation, treat the analog input network as a precision signal path and verify the clock, format, and master or slave configuration against the manufacturer datasheet. Place bypass capacitors close to the supply pins, keep digital return currents away from sensitive analog input routing, and confirm that the external interface device supports the converter's serial output protocol and timing. This page consolidates the PCM1803DB's key conversion specifications, sourcing information, application guidance, and same-family drop-in considerations. It also highlights practical checks involving supply domains, clocking, filtering, PCB layout, and input conditioning that engineers should complete before releasing a new audio design.

RFQ پەیوەندی
PCM1804DB - 24-Bit 192kHz Stereo ADC | Texas Instruments
PCM1804DB

PCM1804DB - 24-Bit 192kHz Stereo ADC | Texas Instruments

The Texas Instruments PCM1804DB is a 24-bit, 192 kHz stereo audio analog-to-digital converter with fully differential analog inputs and an I2S-compatible digital interface, housed in a 28-pin SSOP package. Typical performance includes 112 dB dynamic range, 111 dB signal-to-noise ratio, and -102 dB total harmonic distortion plus noise. These headline specifications place it firmly in the professional and high-grade consumer audio conversion class. A delta-sigma audio ADC is a semiconductor that converts left- and right-channel analog voltages into high-resolution digital samples. It belongs to the ADC and DAC hierarchy, where an ADC performs the analog-to-digital conversion stage needed by digital audio equipment. The PCM1804 combines a precision delta-sigma modulator, a linear-phase antialias digital filter, and a high-pass filter that removes DC offset from the input signal. Key features include support for 24-bit resolution, a maximum sampling rate of 192 kHz, fully differential stereo inputs, and PCM audio operation. The converter can also produce DSD-format data because its delta-sigma modulator operates from the same signal chain. The antialias filter limits out-of-band energy before the digitized signal reaches the audio processor, while the high-pass filter helps prevent DC offset from consuming digital headroom. The PCM1804 uses an advanced CMOS process and integrates both converter channels in one package. Its 28-pin SSOP arrangement supports analog input, digital data, clock, control, and power connections. Linear-phase digital filtering is particularly useful in music-production equipment because it provides predictable passband behavior and helps reduce aliasing without introducing a steep magnitude distortion across the audio band. Typical applications include professional audio interfaces, digital mixing consoles, multichannel audio recorders, studio monitors, broadcast equipment, and high-end consumer audio. Fully differential inputs are useful when the source can drive balanced analog signals, while the 192 kHz capability supports high-resolution recording workflows. The digital output can feed a suitable audio processor, DAC, or transport through the appropriate clock and data interface. PCB design should keep the analog input and digital return paths separated, provide clean reference and supply connections, and follow the manufacturer’s recommended decoupling and layout arrangement. Because audio converters can resolve small signal details, thermal design and grounding are as important as nominal resolution. Confirm clock polarity, master-versus-slave operation, and format settings in the datasheet before finalizing the digital interface. This product record combines the Texas Instruments device specifications, application guidance, verified package information, and drop-in comparison details in one engineering-focused reference. It also highlights practical design considerations for clocking, filtering, signal integrity, and PCB implementation that are not apparent from the MPN alone.

RFQ پەیوەندی
PCM1804DBG4 - 24-Bit 192 kHz Stereo Audio ADC | Texas Instruments
PCM1804DBG4

PCM1804DBG4 - 24-Bit 192 kHz Stereo Audio ADC | Texas Instruments

Texas Instruments PCM1804DBG4 is a 24-bit stereo delta-sigma audio analog-to-digital converter with a maximum sampling rate of 192 kSPS, fully differential analog inputs, and a 112 dB SNR figure of merit. The device is supplied in a 28-pin SSOP package and is designed for high-fidelity audio capture, digital audio equipment, and signal-chain conversion applications. An audio ADC converts analog left and right channel voltages into digital PCM data for processing, storage, transmission, or playback. The PCM1804 belongs to the delta-sigma ADC family, using a precision modulator and digital filtering to provide high resolution and linearity in a single integrated circuit. Its fully differential input architecture supports balanced audio sources and helps reduce common-mode noise pickup when the circuit is laid out carefully. The PCM1804DBG4 supports 24-bit conversion at up to 192 kSPS, making it appropriate for professional audio, USB or digital audio interfaces, broadcast equipment, and instrumentation requiring wide bandwidth. The manufacturer identifies the device as a high-performance stereo A/D converter with PCM audio and DSD-format capability. Its small 28-pin SSOP package helps reduce board area, although careful decoupling and controlled analog layout remain important. Typical uses include stereo recording interfaces, digital mixers, audio capture cards, microphone preamplifier outputs, consumer audio equipment, and measurement instruments. The differential inputs are intended to be driven with appropriate analog front-end circuits rather than directly with high-voltage line-level signals. Input filtering, reference stability, clock implementation, and digital-interface timing determine whether the converter achieves its intended performance. The PCM1804DBG4 uses an SSOP package with a pin arrangement that should be checked against the current manufacturer pin-description table before PCB routing. Use the manufacturer datasheet for the definitive electrical limits, recommended application circuit, clock requirements, and exposed-package details. This page summarizes the principal conversion characteristics and identifies compatible replacement candidates for design review. This page combines the manufacturer product information, distributor availability references, pricing evidence, and practical design considerations into a concise engineering resource. It is intended to help designers evaluate the PCM1804DBG4 for stereo audio conversion while checking the exact ordering suffix and package-specific requirements.

RFQ پەیوەندی
PCM1807PW - 24-Bit, 96kHz Stereo ADC | Texas Instruments
PCM1807PW

PCM1807PW - 24-Bit, 96kHz Stereo ADC | Texas Instruments

The Texas Instruments PCM1807PW is a 24-bit, 96kHz stereo delta-sigma analog-to-digital converter with single-ended analog inputs, 64-times oversampling, and a 14-pin TSSOP package. It accepts two analog channels and supports both master and slave operating modes for flexible audio-clock synchronization. An audio ADC is a signal-conversion IC that converts continuous analog voltage waveforms into digital audio samples. The PCM1807 sits within the ADC-DAC interface category, combining a delta-sigma modulator, digital decimation filter, and DC-blocking high-pass filter. This integrated filtering allows a stereo analog source to connect directly to a digital audio system while limiting out-of-band noise and removing DC offset from the input signal. The principal specifications are 24-bit resolution, a maximum sampling rate of 96kHz, and two single-ended analog inputs. The analog input range is 3 Vp-p, while the converter uses 64-times oversampling and includes a digital decimation filter. These features make the device appropriate for consumer audio equipment, digital recording systems, sound-card designs, and embedded audio products requiring stereo PCM output. The PCM1807 uses a delta-sigma modulation architecture to encode each analog input as a high-frequency bit stream. A digital decimation filter then reduces that stream to the required audio sample rate, while the high-pass filter removes the DC component of the input. Master and slave modes give the system designer control over whether the converter uses an externally supplied master clock and serial clock or operates according to its own clock relationships. Typical applications include stereo audio capture, USB or microcontroller-based sound-card front ends, consumer playback equipment, and measurement products that accept line-level single-ended signals. The 96kHz sampling capability supports high-resolution digital audio workflows, while the 24-bit conversion format preserves fine amplitude detail for subsequent mixing, recording, or signal processing. PCB implementation should preserve short, separated analog and digital return paths and place input filtering components close to the corresponding pins. The analog input network must also be designed for the converter's single-ended 3 Vp-p input range. Designers should use the manufacturer datasheet pin-description and typical-application diagrams when assigning tracks, grounding, and power-supply connections. This page organizes the converter's verified electrical characteristics, package details, commercial information, application guidance, and verified replacement information into an engineering-focused resource. It also identifies the documented same-footprint option while avoiding unsupported cross-brand substitutions.

RFQ پەیوەندی
PCM1808PW - 24-Bit 96-kHz Stereo Audio ADC | TI (Tape & Reel)
PCM1808PW

PCM1808PW - 24-Bit 96-kHz Stereo Audio ADC | TI (Tape & Reel)

The Texas Instruments PCM1808PW is a 24-bit, 96-kHz stereo audio ADC with single-ended analog inputs, 99-dB SNR, and 64-times delta-sigma oversampling, housed in a 14-pin TSSOP package. It converts two analog audio channels into digital data while integrating a decimation filter and a high-pass filter that removes input DC offset. An audio ADC is a data-acquisition IC that transforms continuous analog voltage signals into digital codes for storage, processing, transmission, or playback. The PCM1808 belongs to the broader delta-sigma ADC family, within ADCs, data converters, and signal-chain semiconductors. Its stereo architecture supports two single-ended inputs rather than balanced differential channels, making it suitable for compact consumer and embedded audio equipment. Key verified features include 24-bit resolution, a maximum sampling rate of 96 kHz, 99-dB signal-to-noise ratio, 64-times oversampling, and an integrated digital decimation filter. The manufacturer describes support for both master and slave operating modes. These features allow the converter to capture audio-band signals while reducing analog front-end requirements and limiting out-of-band energy before digital processing. The PCM1808 uses a delta-sigma modulator architecture, with the decimation filter and high-pass filter implemented on-chip. The 99-dB SNR specification indicates a favorable noise floor for high-resolution audio capture, while the 24-bit word length preserves fine amplitude detail. The supplied distributor record identifies the device as a serial, single-ended-input, stereo audio ADC in a 14-TSSOP package. Typical applications include digital audio recording, multimedia input stages, USB or embedded audio interfaces, consumer audio equipment, and systems requiring stereo analog-to-digital conversion. In a signal chain, an analog preamplifier drives the PCM1808 inputs, and the resulting digital stream is routed to a processor, codec interface, or storage subsystem. The converter is especially appropriate where two single-ended channels and a compact surface-mount package are preferred. Designers should verify the complete electrical interface, pin names, clocking requirements, and supported operating conditions against the official PCM1808 datasheet before layout. The TSSOP footprint requires careful analog trace routing and decoupling. Because the verified source provides no exact pinout table or detailed application-specific companion parts, those values are intentionally not invented here. This page consolidates verified manufacturer and distributor information while clearly separating unavailable parameters.

RFQ پەیوەندی
PCM1808PWR - 24-Bit 96-kHz Stereo Audio ADC | TI
PCM1808PWR

PCM1808PWR - 24-Bit 96-kHz Stereo Audio ADC | TI

The Texas Instruments PCM1808PWR is a 24-bit, 96-kHz stereo audio ADC with single-ended analog inputs, 99-dB SNR, and 64-times delta-sigma oversampling, housed in a 14-pin TSSOP package. It converts two analog audio channels into digital data while integrating a decimation filter and a high-pass filter that removes input DC offset. An audio ADC is a data-acquisition IC that transforms continuous analog voltage signals into digital codes for storage, processing, transmission, or playback. The PCM1808 belongs to the broader delta-sigma ADC family, within ADCs, data converters, and signal-chain semiconductors. Its stereo architecture supports two single-ended inputs rather than balanced differential channels, making it suitable for compact consumer and embedded audio equipment. Key verified features include 24-bit resolution, a maximum sampling rate of 96 kHz, 99-dB signal-to-noise ratio, 64-times oversampling, and an integrated digital decimation filter. The manufacturer describes support for both master and slave operating modes. These features allow the converter to capture audio-band signals while reducing analog front-end requirements and limiting out-of-band energy before digital processing. The PCM1808 uses a delta-sigma modulator architecture, with the decimation filter and high-pass filter implemented on-chip. The 99-dB SNR specification indicates a favorable noise floor for high-resolution audio capture, while the 24-bit word length preserves fine amplitude detail. The supplied distributor record identifies the device as a serial, single-ended-input, stereo audio ADC in a 14-TSSOP package. Typical applications include digital audio recording, multimedia input stages, USB or embedded audio interfaces, consumer audio equipment, and systems requiring stereo analog-to-digital conversion. In a signal chain, an analog preamplifier drives the PCM1808 inputs, and the resulting digital stream is routed to a processor, codec interface, or storage subsystem. The converter is especially appropriate where two single-ended channels and a compact surface-mount package are preferred. Designers should verify the complete electrical interface, pin names, clocking requirements, and supported operating conditions against the official PCM1808 datasheet before layout. The TSSOP footprint requires careful analog trace routing and decoupling. Because the verified source provides no exact pinout table or detailed application-specific companion parts, those values are intentionally not invented here. This page consolidates verified manufacturer and distributor information while clearly separating unavailable parameters.

RFQ پەیوەندی
PCM1850PJT - 24-Bit 96 kHz Stereo ADC | Texas Instruments
PCM1850PJT

PCM1850PJT - 24-Bit 96 kHz Stereo ADC | Texas Instruments

Texas Instruments PCM1850PJT is a 24-bit, 96 kHz stereo delta-sigma audio analog-to-digital converter with an integrated 6 × 2-channel multiplexer and programmable-gain amplifier, housed in a 32-pin TQFP package measuring 7 × 7 mm. It provides single-ended input multiplexing, programmable gain from +11 dB to -11 dB in 0.5 dB increments, and a multiplexed conversion output for digital audio capture systems. An audio ADC is a data-conversion IC that converts analog sound signals into digital words for storage, transmission, mixing, or signal processing. It belongs to the ADC and DAC product family, then to data-converter ICs and semiconductor components. The PCM1850 combines an analog input multiplexer, programmable-gain stage, and stereo delta-sigma converter in one device, reducing the number of external switching and gain-control components needed for multiple-input audio equipment. The converter supports 24-bit resolution and sampling rates up to 96 kHz. Its 6 × 2 single-ended input arrangement allows twelve analog input positions to be routed through two internal channels. Maximum input level is 2.4 Vrms, while minimum input resistance is 50 kΩ. The programmable-gain amplifier provides 23 gain selections across the -11 dB to +11 dB range because the range contains 22 dB divided into 0.5 dB steps. The PCM1850PJT uses a serial peripheral interface for digital data and control, as identified by the manufacturer listing for this exact orderable part. Its multiplexed output allows the converter to service selected analog inputs in a defined sequence, making the device suitable for multichannel sound-card, mixer, recorder, broadcast, and instrumentation front ends. The integrated multiplexer and PGA keep the analog routing architecture compact while supporting gain adjustment in software. Common uses include stereo audio capture, microphone and line-level preamp interfacing, multichannel mixers, digital recording equipment, broadcast consoles, and industrial monitoring systems. When laying out the PCB, place input, reference, and decoupling connections according to the manufacturer datasheet to minimize analog noise pickup and preserve converter performance. The key design tradeoff is board complexity versus functional integration. PCM1850PJT combines twelve single-ended input positions, two conversion channels, and programmable gain in one package, but the design must still account for analog grounding, reference decoupling, clocking, digital-interface timing, and input-level limits. This page combines the exact part specifications, practical application guidance, comparison points, and sourcing information needed to evaluate the converter.

RFQ پەیوەندی
PCM1851APJT - 24-Bit 96kHz Stereo ADC with PGA | TI
PCM1851APJT

PCM1851APJT - 24-Bit 96kHz Stereo ADC with PGA | TI

The Texas Instruments PCM1851APJT is a 24-bit, 96-kHz stereo audio analog-to-digital converter with a 6-channel-per-side input multiplexer, programmable gain amplifier, and serial I2C control. It is housed in a 32-pin TQFP package measuring 7 mm by 7 mm. The device is designed for cost-sensitive audio acquisition systems operating from a 5 V analog supply and a 3.3 V digital supply, making it suitable for multichannel recording and receiver equipment. An audio ADC is a specialized data-converter IC that converts analog left- and right-channel audio signals into digital words for storage, processing, transmission, or playback. The PCM1851 belongs to the broader ADC and data-converter hierarchy, where its 24-bit resolution preserves fine signal detail, while its 96-kHz sampling rate supports audio-band conversion. Its multiplexed analog front end permits multiple stereo input sources to share one converter. The PCM1850A/1851A family uses an advanced CMOS process and combines a single-ended analog front end, a 6-channel-per-side multiplexer, and a wide-range PGA in one 32-pin TQFP device. The PCM1851APJT is identified as a 24-bit, two-channel, 96-kHz converter with serial I2C control. These characteristics make it useful in DVD, CD, MD, recorder, and receiver designs where multiple analog sources must be selected digitally. The 6-by-2 multiplexer is the central architectural feature. Instead of requiring a separate stereo ADC for every source pair, the converter can route selected left and right inputs to its analog-to-digital conversion channels. An external or internal control interface, depending on the system configuration, selects the active inputs, while the PGA allows the selected signal level to be adjusted before conversion. This approach reduces board area and system cost when several stereo sources share common conversion electronics. Typical installations include consumer audio recorders, DVD and CD-compatible equipment, MD-based products, broadcast or receiver subsystems, and industrial instrumentation with multiple analog audio inputs. The mixed 5 V analog and 3.3 V digital supply architecture allows the analog converter section and digital interface to operate at appropriate voltage levels, but the PCB must keep analog and return currents separated appropriately. Layout quality is central to achieving the converter's intended audio performance. Place the analog input routing and decoupling components close to their associated pins, use a continuous ground reference, and keep digital interface traces away from sensitive input paths. Follow the manufacturer datasheet for the complete pin description, recommended application circuit, supported supply combinations, and capacitor values rather than substituting generic high-frequency decoupling alone. This product page consolidates the manufacturer feature description, package and interface information, verified market listings, drop-in family alternatives, and application-focused design guidance. It helps engineers identify the correct converter, distinguish package-orderable family members from a complete redesign, and plan PCB integration before analog, digital, and thermal implementation decisions are finalized.

RFQ پەیوەندی
PCM1861DBTR - 2-Channel 192kHz Audio ADC | Texas Instruments
PCM1861DBTR

PCM1861DBTR - 2-Channel 192kHz Audio ADC | Texas Instruments

The Texas Instruments PCM1861DBTR is a 2-channel, 24-bit audio analog-to-digital converter with a maximum sampling rate of 192 kHz, hardware-controlled operation, and a 30-pin TSSOP package. It accepts a single 3.3 V supply and combines an integrated programmable-gain amplifier with a universal audio front end, making it suitable for compact, high-fidelity audio products. The converter is designed for applications requiring 110 dB dynamic-range performance and flexible I2C or SPI host connectivity. An audio ADC is a mixed-signal semiconductor that converts left- and right-channel analog audio into digital PCM data for processing, storage, transmission, or playback. Its functional chain typically includes an analog input stage, programmable gain amplifier, delta-sigma modulator, digital decimation filter, and serial audio interface. The PCM1861 integrates these functions into one device, reducing the need for a separate external programmable-gain amplifier and simplifying mixed-signal board design. The primary features include 110 dB signal-to-noise performance, 2-channel audio conversion, 24-bit resolution, and operation up to 192 kHz. Its hardware-controlled architecture allows system-level operating conditions to be managed through external control signals instead of relying entirely on serial commands. An integrated PGA provides analog gain control close to the input source, which can improve signal utilization before conversion and reduce sensitivity to noise introduced by long input paths. The universal front end supports multiple input configurations and is intended to accommodate common consumer, communications, and industrial audio signals. A 3.3 V single-supply architecture simplifies power planning in portable and embedded systems. I2C and SPI interfaces allow the converter to communicate with a host processor while supporting board-level control, configuration, and digital audio data transfer. The specified -40°C to +125°C temperature range supports operation across consumer, industrial, and extended-temperature equipment. Typical uses include USB and wireless audio accessories, Bluetooth speaker systems, voice-processing equipment, industrial monitoring terminals, consumer audio converters, and multichannel recording front ends where two-channel conversion is sufficient. The 30-pin TSSOP package also supports compact board layouts, although careful decoupling and analog-layout practices remain essential for preserving converter performance. For implementation, place the analog inputs and their supporting components close to the converter, keep digital clock and data traces away from sensitive input nodes, and use the supply and grounding arrangement recommended in the manufacturer datasheet. Confirm all clock, filter, interface, and input-mode settings before enabling the device because incorrect configuration can alter channel routing, gain behavior, or data format. This product page combines the manufacturer’s key device characteristics with practical application guidance, interface and packaging details, replacement considerations, and engineering notes intended to shorten design-in and review time.

RFQ پەیوەندی
PCM1862DBT - 24-Bit 192kHz Stereo Audio ADC | TI
PCM1862DBT

PCM1862DBT - 24-Bit 192kHz Stereo Audio ADC | TI

Texas Instruments PCM1862DBT is a 2-channel, software-controlled audio ADC with a universal front end, 24-bit conversion, and a maximum sampling rate of 192 kSPS. It operates from a single 3.3 V supply and is housed in a 30-pin TSSOP package. The device provides 103 dB dynamic range and supports I2C and SPI control interfaces, making it suitable for compact, high-resolution audio acquisition systems. An audio ADC is a semiconductor that converts analog left- and right-channel audio signals into digital data for processing, storage, transmission, or playback. It belongs to the signal-conversion hierarchy: ADC → data converter → integrated circuit, and it sits between an analog microphone or line-level front end and a digital signal processor, MCU, or audio codec. A universal front end integrates gain, filtering, and analog input conditioning to reduce the number of external components required in a stereo audio subsystem. Key features include 103 dB dynamic range, 24-bit resolution, 192 kSPS maximum sampling, two analog input channels, and a single 3.3 V supply. The integrated software-controlled PGA reduces the need for discrete analog gain stages, while I2C and SPI interfaces support flexible control from embedded processors. A 30-pin TSSOP package also makes the PCM1862 practical for compact industrial, communications, and consumer audio equipment. The PCM1862 family was developed around a universal audio front end intended to simplify high-performance end-product designs and support European Ecodesign objectives. Software configuration reduces the number of external controls and permits operating modes to be selected through the digital interface. Its single-supply operation also simplifies power architecture compared with converters requiring a separate 5 V analog rail or external programmable-gain stage. Typical uses include microphone-array capture, voice interfaces, industrial monitoring, USB audio front ends, and embedded stereo recording. In a typical design, analog signals enter through the integrated input network, the selected PGA gain is programmed over I2C or SPI, and the resulting PCM data is transferred to a host processor. System designers must select suitable input and reference circuitry based on the source impedance, signal level, and required noise performance. A key design consideration is the analog and digital layout. Keep input traces short, provide a quiet analog ground path, decouple the supply close to the device, and follow the manufacturer pin descriptions when assigning the 30 TSSOP connections. Verify the selected interface mode, system clock, channel mapping, and gain settings in firmware because configuration errors can appear as incorrect gain, channel interchange, or digital-format incompatibility. This page combines the PCM1862DBT specifications, family-level drop-in options, interface guidance, and application-oriented design notes to support component selection, schematic review, PCB planning, and procurement decisions. The comparison tables also identify which parameter values require verification for a particular production design.

RFQ پەیوەندی
PCM1863DBTR - 110dB 24-Bit Stereo Audio ADC | Texas Instruments
PCM1863DBTR

PCM1863DBTR - 110dB 24-Bit Stereo Audio ADC | Texas Instruments

The Texas Instruments PCM1863DBTR is a 24-bit, two-channel software-controlled audio ADC with 110 dB dynamic range, support for sampling rates up to 192 kHz, and a 30-pin TSSOP package. It accepts analog audio through a universal front end and provides both I2C and SPI control interfaces for configuration and data transfer. An audio ADC is a mixed-signal integrated circuit that converts left and right analog audio signals into digital words for processing, storage, transmission, or playback. The PCM1863 belongs to the ADC/DAC category and, more specifically, to the special-purpose audio converter family. Its software-controlled architecture allows a host processor to select operating conditions and interface behavior rather than relying entirely on fixed hardware settings. The headline specifications include 24-bit conversion resolution, two-channel operation, 192 kHz maximum sampling capability, and 110 dB dynamic range. The analog supply range shown for the DBTR ordering variant is 3.3 V to 4.2 V, while the operating temperature range is -40 °C to +125 °C. I2C and SPI support makes the device adaptable to embedded audio systems whose control architecture uses either serial protocol. The universal front end is intended to reduce the number of external signal-conditioning components required around the converter. The related PCM186x family also supports a software-configurable PGA covering a -12 dB to +32 dB gain range. This range allows the converter to accommodate different source amplitudes while helping the system avoid an overdriven ADC input. The integrated band-gap reference further supports predictable operation of the converter’s internal reference circuitry. Typical uses include professional audio capture, consumer audio equipment, microphone preamplifier outputs, musical-instrument interfaces, and multi-zone sound systems. In these systems, the PCM1863 can digitize stereo analog audio while a microcontroller or digital audio processor controls registers and receives samples. Its 110 dB dynamic range is particularly relevant when preserving low-level and high-level audio information within the same conversion path. PCB implementation should prioritize short, quiet analog input routing and a stable return path for the analog supply. Place input and reference-related passive components close to their associated pins, and separate the analog section from high-current digital or switching paths where practical. Confirm the complete pin mapping and recommended application circuit in the Texas Instruments datasheet before releasing a layout. This product page combines the PCM1863DBTR ordering information with package details, drop-in family alternatives, interface guidance, and practical selection criteria. It supports faster component evaluation while keeping design decisions anchored to the manufacturer’s published architecture and the PCM1863 product family.

RFQ پەیوەندی
PCM1864DBT - 24-Bit 4-Channel Audio ADC | Texas Instruments
PCM1864DBT

PCM1864DBT - 24-Bit 4-Channel Audio ADC | Texas Instruments

Texas Instruments PCM1864DBT is a 24-bit, 4-channel software-controlled audio ADC with a maximum sampling rate of 192 kHz, 103 dB dynamic range, and a 30-pin TSSOP package. It operates from a single 3.3 V supply and supports both I2C and SPI control interfaces. The integrated programmable-gain amplifier and universal audio front end make it suitable for multichannel audio acquisition, active speaker monitoring, and mixed-signal systems that require compact conversion without a separate analog front end. An audio ADC is a specialized analog-to-digital converter optimized for capturing human-audible and near-audible signals. It combines low-noise amplification, sampling, quantization, and digital filtering into a device intended for audio equipment. In the signal-chain hierarchy, PCM1864DBT belongs to the ADC and DAC class, functions as a four-channel audio ADC, and ultimately belongs to the broader semiconductor and mixed-signal IC categories. Its universal front end is intended to simplify connection of multiple analog sources while retaining programmable gain. The principal device characteristics include 24-bit resolution, four simultaneous conversion channels, a 192 kHz maximum sampling rate, and 103 dB dynamic range. The I2C interface supports a two-wire control connection, while SPI provides a higher-throughput alternative for systems that transfer configuration data through a dedicated serial bus. A 3.3 V single-supply architecture reduces the need for negative rails in line-level audio front ends and simplifies synchronization with 3.3 V digital systems. The PCM186x family was designed around software-controlled operation, allowing a host processor to configure the converter for the required signal path. The integrated programmable-gain amplifier gives the system additional control over input amplitude without requiring a separate gain stage for every channel. This can reduce board area and component count, although the selected gain, digital filter settings, clocking method, and input configuration must be coordinated to avoid clipping or loss of dynamic range. Typical uses include four-channel digital audio recorders, active loudspeaker monitoring, soundbar test systems, industrial monitoring equipment, and multichannel test-and-measurement products. Its 30-pin TSSOP package is compact, but careful layout remains important because analog inputs, supply connections, ground return paths, and digital control signals share the same device. A clean 3.3 V supply and quiet analog reference arrangement are essential for preserving the advertised audio performance. The main design trade-off is integration versus flexibility. The universal front end and integrated PGA simplify a four-channel design, but fixed functions and serial configuration require firmware support and leave less freedom than a discrete amplifier plus high-resolution converter architecture. Confirm the selected input mode, sampling rate, clock source, and filter configuration in the manufacturer datasheet before releasing a production layout. This page organizes the PCM1864DBT specifications, application guidance, pin-layout considerations, and same-family replacement options into a practical engineering reference. It also distinguishes verified package and interface facts from detailed electrical values that require confirmation in the manufacturer datasheet, helping designers shorten component-selection and review time.

RFQ پەیوەندی
PCM1870RHFR - 16-Bit Stereo Audio ADC | Texas Instruments
PCM1870RHFR

PCM1870RHFR - 16-Bit Stereo Audio ADC | Texas Instruments

The Texas Instruments PCM1870RHFR is a low-power 16-bit stereo audio ADC with a 90 dB SNR, 5 kSPS to 50 kSPS sampling range, microphone bias, ALC, sound-effect processing, and a notch filter. It is housed in a 24-pin VQFN (RHF) package measuring 5 mm by 4 mm and supports I2C, serial, and SPI interfaces. An audio ADC is a data-converter IC that converts left- and right-channel analog audio signals into digital data for processing, storage, or transmission. The PCM1870 belongs to the broader ADC and data-converter hierarchy, combining low-noise analog capture with programmable microphone conditioning and digital control functions in one compact package. Key features include 16-bit resolution, a sampling rate of 5 kSPS to 50 kSPS, and 90 dB signal-to-noise ratio. The integrated microphone bias supports condenser microphones, while automatic level control helps maintain usable signal amplitude in changing acoustic conditions. Sound-effect and notch-filter functions add practical signal conditioning without requiring separate support ICs. The device accepts single-ended or differential audio inputs and communicates through I2C, serial, or SPI. Its low-power design is suited to portable audio capture, industrial monitoring, and embedded systems where a compact converter with integrated microphone support simplifies both board area and component count. The manufacturer datasheet also notes that the package thermal pad must be soldered to the PCB for thermal and mechanical performance. Typical applications include USB microphones, conference equipment, voice-capture modules, industrial acoustic monitors, and consumer recording products. The 5 kSPS to 50 kSPS range covers voice and low-bandwidth audio, while the 90 dB SNR supports higher-quality signal acquisition than a basic low-resolution interface. For PCB implementation, follow the manufacturer land pattern and connect the exposed thermal pad to the ground plane. Place input, reference, and decoupling components close to their associated pins, and route the serial interface away from sensitive analog inputs to reduce digital coupling into the captured signal. This page consolidates the PCM1870RHFR electrical identity, interface details, application guidance, engineering considerations, and verified drop-in candidates into a design-focused reference for audio engineers evaluating the part for new or existing PCB layouts.

RFQ پەیوەندی