بەرهەمەکان (3,600+)

ADS808Y/250 - 12-Bit 70MSPS ADC, HTQFP-48 | Texas Instruments
ADS808Y/250

ADS808Y/250 - 12-Bit 70MSPS ADC, HTQFP-48 | Texas Instruments

The Texas Instruments ADS808Y/250 is a 12-bit, 70-MSPS pipelined analog-to-digital converter with one single-ended or differential input channel, housed in a 48-pin HTQFP (PHP) 7x7 mm package. It accepts analog inputs from a 4.75V to 5.25V analog supply and is optimized for high dynamic performance at IF and baseband sampling rates, with selectable full-scale input range and flexible single-ended or differential clocking. An analog-to-digital converter (ADC) is a mixed-signal integrated circuit that samples a continuous analog voltage and quantizes each sample into a discrete digital code. Pipelined ADCs such as the ADS808 use a cascaded architecture of low-resolution stages (typically 1.5 bits per stage) with digital error correction, achieving the best trade-off between sampling speed (tens to hundreds of MSPS), resolution (10-14 bits), and active power. Within the broader hierarchy, the ADS808 sits under data converter -> ADC -> pipelined ADC -> high-speed ADC -> mixed-signal IC -> semiconductor. Pipelined ADCs are the dominant topology for communications, instrumentation, and imaging applications in the 10 MSPS to 250 MSPS range. Key features of the ADS808 include 70 MSPS sampling rate, selectable full-scale input range, internal or external voltage reference, a low-jitter 0.25 ps RMS track-and-hold, single 5V analog supply operation, and a powerdown mode for portable applications. The differential or single-ended clock input accepts TTL/CMOS/LVPECL swings and provides flexible timing for synchronization with downstream DSP or FPGA logic. Its premium track-and-hold maintains low distortion even at IF frequencies, simplifying front-end design in communications receivers. Typical applications for the ADS808Y/250 include CCD imaging digitizers, digital still cameras, basestation receiver IF digitizers, medical ultrasound beamformers, video processing, and high-speed data acquisition cards. The 12-bit/70-MSPS combination is well suited to digitizing signals in the 1 MHz to 35 MHz IF band where 70 dB SNR and SFDR are required for downstream demodulation. For test and measurement, the device serves as a general-purpose ADC front-end for digitizing oscilloscope channels and spectrum analyzer intermediate frequencies. When designing with the ADS808, place a 0.1 uF ceramic decoupling capacitor within 5 mm of every supply pin, and use a 10 uF bulk tantalum or ceramic capacitor on AVDD and DRVDD to suppress switching noise. Provide a clean, low-jitter clock source (jitter < 1 ps RMS) to preserve SNR at high input frequencies, and route analog and digital grounds on separate planes joined at a single point beneath the IC. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
ADS808Y/250G4 - 12-Bit 70MSPS Pipelined ADC | Texas Instruments
ADS808Y/250G4

ADS808Y/250G4 - 12-Bit 70MSPS Pipelined ADC | Texas Instruments

The Texas Instruments ADS808Y/250G4 is a 12-bit, 70 MSPS pipelined analog-to-digital converter housed in a 48-pin HTQFP (PHP) powerPAD package with exposed thermal pad, designed for high-dynamic-range IF and baseband digitisation. It integrates a premium 0.25 ps-rms-jitter track-and-hold, accepts single-ended or differential inputs, and operates from a single 5 V analog supply with flexible internal/external reference options and a powerdown pin for energy-aware systems. An analog-to-digital converter (ADC) is a mixed-signal integrated circuit that converts continuous-time analog voltages into discrete digital codes at a sampling rate set by an external clock. Pipelined ADCs like the ADS808 use multiple low-resolution flash stages cascaded behind a high-bandwidth SHA, trading modest latency for very high sampling rates at moderate resolution. They sit within the broader hierarchy: ADC -> data converter -> mixed-signal IC -> power-management-and-signal-chain semiconductor. Key features include 70 MSPS guaranteed sampling rate, 12-bit resolution with no missing codes, selectable 1.0 Vpp or 2.0 Vpp full-scale input range, internal or external reference, and a low-jitter differential or single-ended clock input that accepts sine or square signals down to 0.5 Vp-p. The 48-HTQFP powerPAD package provides a thermal resistance of approximately 25 C/W with sufficient copper area, enabling reliable operation up to the 70 MHz clock rate. The architecture is a 12-stage pipelined ADC with digital error correction. Its track-and-hold bandwidth exceeds 100 MHz, and aperture jitter is specified at 0.25 ps rms, which is critical for preserving SNR when digitising IF signals above 30 MHz. Output data is delivered via a parallel CMOS interface compatible with standard DSPs and FPGAs. Typical applications include medical ultrasound imaging, digital video broadcast demodulation, CCD imaging digitisation, IF sampling in communications receivers, and industrial test instrumentation. The wide input bandwidth makes it particularly attractive for undersampling IF stages. When designing with this device, allocate adequate ground and supply decoupling (100 nF ceramic close to each supply pin plus a 10 uF bulk), and provide at least 1 square inch of PCB copper beneath the exposed pad. The /PD pin should be tied high for normal operation and pulled low for powerdown, reducing quiescent current for portable or energy-aware platforms. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical PCB design guidance not always presented together in the manufacturer datasheet, giving engineers a single source for sourcing, selection, and layout decisions.

RFQ پەیوەندی
ADS820U - 10-Bit 20-MSPS Pipelined ADC | Texas Instruments
ADS820U

ADS820U - 10-Bit 20-MSPS Pipelined ADC | Texas Instruments

The Texas Instruments ADS820U is a 10-bit, 20-MSPS single-input pipelined analog-to-digital converter with differential or single-ended input capability, supplied in a 28-pin SOIC package. It operates from a single +5 V supply and includes an internal reference, internal track-and-hold circuit, 10-bit quantizer, and power-down feature. According to the verified TI product and distributor information, the converter is designed for low-power, moderate-speed signal acquisition. An ADC is a data-conversion IC that samples an analog voltage and converts it into a digital code for processing by a microcontroller, DSP, FPGA, or other digital system. The ADS820U belongs to the pipelined ADC class, which uses multiple internal stages to provide a practical conversion rate for communications, instrumentation, industrial control, and embedded measurement systems. Its 10-bit resolution represents 1,024 possible output codes, while the 20-MSPS sampling rate supports acquisition of rapidly changing analog signals. Key verified features include 10-bit resolution, 20 MSPS throughput, one analog input, one pipelined conversion channel, 28-SOIC packaging, operation from a single +5 V supply, and configurable differential or single-ended input signals. The verified search data also reports no missing codes, an internal reference, 195 mW low power, 60 dB SNR, 65 MHz wideband track-and-hold bandwidth, and 0.2 LSB differential linearity error. These figures come from the provided ADS820U search results and should be checked against the current manufacturer datasheet before design release. The monolithic converter uses a small-geometry CMOS process according to the TI product page. The internal track-and-hold captures the analog input before quantization, while the pipelined architecture supports throughput-oriented sampling. Configuration flexibility allows the same device family to accept either differential or single-ended input signals, which can simplify front-end design when common-mode rejection or single-ended source compatibility is required. The internal reference reduces the need for an external reference circuit in suitable applications. Typical uses include communications interfaces, industrial measurement, control loops, data-acquisition modules, embedded instrumentation, and embedded systems requiring parallel digital conversion. A 10-bit ADC is appropriate where the required system resolution does not justify the complexity and power of a higher-resolution converter. The 28-SOIC package is also useful for prototypes, legacy designs, and boards that already use through-hole or leaded analog interfaces. The main design consideration is ensuring that the analog input, reference, supply decoupling, digital output timing, and acquisition clock satisfy the converter requirements. Use the manufacturer datasheet for the exact pinout, input range, timing, output coding, reference accuracy, and recommended application circuit. Do not infer those missing values from the distributor summaries. This page combines verified source data with engineering guidance and explicitly identifies parameters that require confirmation. This product summary synthesizes verified TI, DigiKey, Mouser, and Octopart information with practical design context. It is intended to support initial component selection while preserving traceability to the supplied source links and avoiding unsupported pricing, lifecycle, and pin-level claims.

RFQ پەیوەندی
ADS820U/1K - 10-Bit 20-MSPS ADC | Texas Instruments
ADS820U/1K

ADS820U/1K - 10-Bit 20-MSPS ADC | Texas Instruments

The Texas Instruments ADS820U/1K is a 10-bit, 20-MSPS monolithic analog-to-digital converter with one pipelined input in a 28-pin SOIC package. It accepts single-ended or differential analog signals and incorporates a 10-bit quantizer, an internal track-and-hold circuit, an internal reference, and a power-down feature. The monolithic converter uses a small-geometry CMOS process. An analog-to-digital converter is a data-acquisition IC that converts a continuous analog voltage into a numeric code for processing by a microcontroller, DSP, FPGA, or embedded control system. The ADS820 belongs to the ADC hierarchy, where resolution describes the number of representable levels and sampling rate describes how quickly the input is captured. A 10-bit converter provides 1,024 possible codes, while 20 MSPS supports high-speed measurement, waveform capture, communications, and industrial control functions. Key characteristics include a 10-bit conversion resolution, a maximum conversion rate of 20 million samples per second, one analog input channel, and a 28-SOIC surface-mount package. The internal track-and-hold stage captures the analog input for conversion, and the integrated reference simplifies the external analog circuitry. A power-down function supports systems that need to reduce consumption when conversion activity is not required. The converter uses a pipelined architecture, allowing successive conversion stages to support the device's 20-MSPS throughput. This is useful for acquisition blocks where sampling cadence must be predictable. The 10-bit result provides a balance between data throughput and circuit complexity, making the ADS820U/1K suitable for designs that need faster sampling than a general-purpose low-speed ADC without requiring a high-resolution high-speed converter. Typical uses include industrial process measurement, data acquisition, control-loop monitoring, waveform digitization, communications receivers, and embedded signal processing. In these systems, the ADC can provide a binary output representing the sampled analog voltage to a parallel digital processor or interface logic. Differential input operation can also support noise-resistant sensing when the source can present a balanced signal. When laying out a design, place input, reference, decoupling, and digital-interface connections according to the manufacturer datasheet. Pay particular attention to source impedance, sampling-clock timing, output timing, and grounding. Because the converter combines analog acquisition with digital signals, separating analog and digital return paths and minimizing clock coupling can improve repeatability and reduce conversion noise. This page organizes the ADS820U/1K specifications, package information, sourcing route, and application guidance into one engineering-focused reference. It also distinguishes the verified device characteristics from specifications that must be confirmed in the manufacturer datasheet before layout, timing, or signal-chain calculations are performed.

RFQ پەیوەندی
ADS821 - 10-Bit 40MSPS ADC Internal Ref | TI
ADS821

ADS821 - 10-Bit 40MSPS ADC Internal Ref | TI

The Texas Instruments ADS821 is a low-power, monolithic 10-bit, 40MHz analog-to-digital converter built on a small-geometry CMOS process. The complete converter integrates a 10-bit quantizer with an internal track-and-hold circuit, an internal reference, and a power-down feature, and is available in SO-28 and SSOP-28 packages. It operates from a single +5V supply and accepts either differential or single-ended input signals. A pipelined ADC is an analog-to-digital converter that uses a cascade of low-resolution stages to achieve high sampling rates while maintaining reasonable power consumption. In the ADC hierarchy, the ADS821 is a high-speed pipelined converter within the broader category of data converters, which sit between analog signals and digital signal processors in a signal chain. Pipelined ADCs are used where both high speed and moderate resolution (10 to 14 bits) are required. The ADS821 provides no missing codes, a high SNR of 58 dB, and power dissipation of only 380 mW at 40 MSPS, which is low for a 10-bit 40MHz CMOS converter. The integrated track-and-hold removes the need for an external sample-and-hold amplifier, and the internal reference reduces external component count. The power-down feature reduces system power during idle periods. Architecturally, the device uses a pipelined conversion architecture optimized for conversion rates up to 40 MSPS. Differential input capability improves common-mode rejection and reduces even-order harmonic distortion compared to single-ended drive. Digital outputs drive standard CMOS logic, simplifying interfacing to FPGAs, DSPs, or microcontrollers in single-supply +5V systems. Typical applications include medical ultrasound signal digitizing, video and CCD digitizing, digital oscilloscope front-ends, industrial data-acquisition boards, and communications IF sampling. The combination of internal reference, internal track-and-hold, and 40MSPS throughput makes the ADS821 an efficient building block for high-speed acquisition channels. When designing with the ADS821, use a low-impedance analog source or high-speed op-amp driver to ensure differential input settling within one sample period. Decouple all supply pins and keep the analog input path short and shielded for best SNR.

RFQ پەیوەندی
ADS821E - 10-Bit 40MSPS ADC w/ Internal Reference | TI/Burr-Brown
ADS821E

ADS821E - 10-Bit 40MSPS ADC w/ Internal Reference | TI/Burr-Brown

The Texas Instruments ADS821E (originally Burr-Brown) is a low-power, monolithic 10-bit, 40 MSPS analog-to-digital converter (ADC) with single-ended or differential inputs, an internal reference, an internal track-and-hold, and 9.3 effective bits of resolution, offered in a 28-pin SSOP package. According to the manufacturer datasheet, the converter consumes only 380 mW from a single +5 V analog supply, while delivering 58 dB SNR for high-fidelity digitization of intermediate-frequency signals, video, and baseband communications. The ADS821E provides CMOS-compatible digital outputs and is guaranteed to have no missing codes across the full operating temperature range. A successive-approximation-register (SAR) ADC, the ADS821E operates by sampling an input voltage once per conversion cycle and comparing it to an internal binary-weighted capacitor network through a precision comparator; unlike pipelined ADCs, the SAR architecture is fully specified on a single clock edge with no pipeline latency. SAR ADCs occupy a tier below flash ADCs in conversion speed but above delta-sigma ADCs in raw sample rate, and are widely deployed in industrial measurement, data acquisition, and instrumentation. The 28-pin SSOP package places all analog and digital pins on opposite sides of the die to minimize coupling and ease PCB layout separation. Key features include an internal 2.5 V reference (which can be overdriven externally), a track-and-hold amplifier front-end capable of handling input bandwidths well beyond Nyquist for undersampling applications, low differential nonlinearity for accurate code-edge transitions, and an output enable pin for bus multiplexing. The proprietary architecture provides excellent dynamic performance with spurious-free dynamic range suitable for IF-sampling communications receivers. Power-down mode reduces standby consumption to a few milliwatts for battery-portable designs. Typical applications include digital oscilloscopes and waveform digitizers, IF sampling for communications receivers, CCD imaging digitizers, portable medical imaging, baseband quadrature sampling in software-defined radios, and general-purpose high-speed data acquisition. The 40 MSPS sample rate and 10-bit resolution are well matched to display refresh rates and pixel-clock-driven video systems. When designing with this device, decouple the analog supply (AVDD) and digital supply (DVDD) domains separately with 0.1 µF ceramic capacitors placed within 5 mm of the supply pins. Maintain a single-point ground star connection under the AGND/DGND pins to avoid digital switching noise corrupting the analog input. Drive the analog input from a low-impedance, bandwidth-appropriate buffer for best spurious performance. This page synthesizes distributor pricing, drop-in alternatives from the same ADS82x family and pin-compatible same-package alternatives, and practical PCB layout notes not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
ADS821U - 10-Bit 40-MSPS ADC | Texas Instruments | Signal Capture
ADS821U

ADS821U - 10-Bit 40-MSPS ADC | Texas Instruments | Signal Capture

The Texas Instruments ADS821U is a 10-bit, 40-MSPS pipelined analog-to-digital converter with one single-ended or differential input, 58 dB SNR, 9.3-bit ENOB, an internal reference, and an internal track-and-hold circuit in a 28-pin SOIC (DW) package. Its 380 mW low-power design targets high-speed instrumentation where accurate sampling, compact size, and predictable signal acquisition are required. An ADC is a data-acquisition IC that samples an analog voltage and converts it into a digital code for processing by a microcontroller, DSP, FPGA, or test system. The ADS821U belongs to the pipeline ADC family, with its resolution, conversion rate, input architecture, reference, and acquisition circuitry defining its role within a broader analog-to-digital conversion and signal-processing hierarchy. The converter's principal features are 40 MSPS operation, 10-bit resolution, 58 dB SNR, and 9.3-bit ENOB. The no-missing-codes feature supports deterministic output behavior, while the internal track-and-hold circuit simplifies front-end design. The verified product information also identifies a 380 mW low-power figure and supports SOIC-28 and SSOP-28 family packaging, with ADS821U specifically supplied in the 28-pin SOIC package. Technically, the ADS821U is designed for single-ended or differential input acquisition. An internal reference and internal track-and-hold function reduce the number of external support blocks required in a conventional measurement chain. However, signal bandwidth, input range, timing, reference behavior, and electrical limits must be confirmed from the manufacturer datasheet before finalizing analog front-end and clock design. Typical uses include communications and signal-analysis equipment, industrial measurement systems, test and measurement instruments, and embedded control or processing platforms that need a 40-MSPS conversion rate. The 10-bit code width is appropriate where the required information bandwidth is greater than the precision demanded from every individual sample. A key design consideration is that the ADC does not replace the surrounding analog system. Input scaling, source impedance, anti-alias filtering, clock jitter, grounding, decoupling, and digital-interface timing determine practical performance. Confirm the pinout and pin functions in the official datasheet before layout or replacement work. This page combines verified manufacturer and distributor information with application guidance, practical design notes, and explicitly qualified replacement considerations. Unverified prices, complete pin functions, and unconfirmed cross-brand drop-in equivalents are not inferred.

RFQ پەیوەندی
ADS821U-1 - 10-Bit 40-MSPS ADC | Texas Instruments | SOIC-28
ADS821U-1

ADS821U-1 - 10-Bit 40-MSPS ADC | Texas Instruments | SOIC-28

Texas Instruments ADS821U-1 is a monolithic 10-bit analog-to-digital converter with a conversion rate of 40 MSPS, a single-ended or differential analog input, and a 28-pin SOIC (DW) package. The device operates from a single +5 V supply and includes an internal track-and-hold circuit, reference circuitry, and power-down capability. These characteristics place the ADS821U-1 in the hierarchy of ADC > data converter > analog-to-digital converter > integrated circuit. An analog-to-digital converter translates a continuous analog voltage into a digital code. In the ADS821U-1, the internal sample-and-hold mechanism acquires the input before a 10-bit pipelined conversion stage generates a digital result. A parallel output interface exposes the conversion code directly to a digital system, while configurable input architecture allows the converter to accept either differential or single-ended signals. The principal headline specifications are 10-bit resolution, 40 MSPS conversion throughput, and operation from a single +5 V supply. The 28-pin SOIC package provides a conventional surface-mount footprint suitable for instrumentation, communications, industrial control, and signal-acquisition designs. The converter also includes an internal reference and an integrated track-and-hold function, reducing the number of external analog support functions required in a basic design. The pipelined architecture supports conversion throughput suitable for waveform sampling, digital oscilloscope, communications, and closed-loop measurement systems. Resolution and sampling rate should be evaluated together: 40 MSPS permits substantial time-domain resolution, while the 10-bit output represents 1,024 discrete codes. Differential operation can improve signal-to-noise performance when the source can provide a complementary signal, while single-ended operation simplifies lower-complexity front ends. Because the ADS821U-1 uses a parallel output interface, PCB layout must minimize data-bus timing skew and keep analog and digital return paths appropriately separated. Input, reference, and decoupling connections should follow the pin-description table and recommended-layout guidance in the manufacturer datasheet. Adequate trace length matching is particularly important when using the differential input configuration. The principal design trade-off is that 10-bit resolution limits theoretical quantization resolution to approximately 1 LSB of the selected full-scale input range. Applications requiring greater dynamic range may prefer a higher-resolution ADC, while applications requiring a compact, +5 V, 40-MSPS converter with parallel output can benefit from the integrated feature set. The -1 ordering suffix should be confirmed against purchasing documentation before production release because its exact commercial conditions are not stated on the manufacturer product page excerpt. This page combines the manufacturer product description with package and lifecycle details, practical ADC layout guidance, technical comparisons, and direct sourcing support. It also provides a structured path to request current availability, lead time, and commercial terms for the exact ADS821U-1 ordering code through the Request a Quote form on this page.

RFQ پەیوەندی
ADS822E - 10-Bit, 40-MSPS Pipelined ADC | Texas Instruments
ADS822E

ADS822E - 10-Bit, 40-MSPS Pipelined ADC | Texas Instruments

The Texas Instruments ADS822E is a 10-bit, single-channel, 40-MSPS pipelined analog-to-digital converter with single-ended or differential inputs and internal or external reference capability, packaged in a 28-pin SSOP. It is designed for high-speed signal acquisition where 10-bit conversion resolution and compact parallel-interface integration are more important than the very highest conversion rates. An ADC is a data-acquisition semiconductor that samples an analog voltage and converts it into a digital code. A pipelined ADC uses multiple internal stages that operate concurrently after the pipeline is filled. Compared with flash converters, this architecture can provide useful resolution at lower power and cost. The ADS822E belongs to the ADC hierarchy, integrates an analog input stage and digital quantizer, and supports acquisition, instrumentation, communications, and embedded measurement systems. The verified distributor data identifies a 10-bit converter with one input, one pipelined stage, and a 40-MSPS sampling rate. Its single-ended input supports the common source configuration used in many sensor and signal-chain systems, while differential operation can improve common-mode rejection when supported by the complete ADC implementation. The part uses a single +5 V supply according to the supplied comparison source, and the verified listing describes internal or external reference options. The ADS822E family is available in an SSOP-28 package. The manufacturer product page states that ADS822, ADS823, ADS825, ADS826, and ADS828 are pin-for-pin compatible, with the higher-speed members offering upgrade paths from the ADS822/ADS825 family. This compatibility is useful when a design needs more sampling rate without changing the board footprint or parallel interface layout. Typical applications include industrial sensor acquisition, communications infrastructure, portable measurement systems, medical instrumentation, and embedded data-acquisition platforms. Because the converter has a 40-MSPS maximum sampling rate, it is appropriate for waveforms within its Nyquist bandwidth rather than very high-frequency RF signals requiring a substantially faster converter. Designers should verify input range, timing, reference stability, output coding, and acquisition settling time against the manufacturer datasheet before finalizing a system. For PCB design, keep analog input, reference, supply, and digital return paths well controlled. The SSOP-28 device benefits from short analog traces, adequate bypassing, and separation between sensitive analog nodes and fast digital output lines. Use the manufacturer datasheet for the complete pinout, timing diagrams, electrical limits, and application-specific reference configuration.

RFQ پەیوەندی
ADS822E/1K - 10-Bit 40-MSPS ADC | Industrial Sensing
ADS822E/1K

ADS822E/1K - 10-Bit 40-MSPS ADC | Industrial Sensing

The Texas Instruments ADS822E/1K is a 10-bit, single-channel, 40-MSPS pipelined analog-to-digital converter with single-ended or differential inputs, a parallel CMOS interface, and a 28-pin SSOP (DB) package. Its 1.5 V to 3.5 V input range, 300 MHz analog input bandwidth, and support for internal or external references make it suitable for precision signal acquisition in industrial, communications, and test equipment. An ADC is a data-acquisition IC that converts continuous analog voltage into a digital code. The ADS822 family belongs to the pipelined ADC hierarchy, where a multistage conversion architecture supports high sampling rates while providing a parallel interface for direct connection to digital logic, processors, or FPGA input blocks. The ADS822E/1K is one channel, so it samples one analog input at each conversion rather than multiplexing multiple channels internally. Three defining specifications are its 10-bit resolution, 40 MSPS maximum sampling rate, and 300 MHz analog input bandwidth. The 10-bit result represents each conversion with 1024 codes, while the 40 MSPS rate supports acquisition of high-bandwidth waveforms. The 300 MHz input bandwidth reduces the need for heavy external low-pass filtering, although the selected filter must still control aliasing and out-of-band energy. The ADS822E/1K uses a parallel CMOS interface and supports internal or external reference options. These features provide flexibility when the converter is paired with an FPGA, a digital signal processor, or a precision data-acquisition controller. Because the parallel interface transfers multiple bits simultaneously, board routing must account for timing skew and simultaneous switching noise across the digital output bus. Typical applications include vibration monitoring, industrial waveform capture, communications signal analysis, ultrasound receive channels, and laboratory instrumentation. The device is especially relevant when a 40 MSPS conversion rate is sufficient but 75 MSPS performance is unnecessary. In such systems, the ADC can capture repetitive or single-shot analog waveforms before conversion and digital processing. The primary design trade-off is interface timing rather than package capacity. Use controlled-impedance routing, short parallel traces, and a solid ground reference to preserve data integrity at the maximum conversion rate. External decoupling, a stable reference arrangement, and input filtering should follow the manufacturer’s recommended application circuit. This page combines the manufacturer’s device specifications with same-family, pin-compatible upgrade options and practical implementation guidance. It helps engineers distinguish functional upgrades from drop-in choices, assess interface requirements, and select the appropriate ADC speed and package for a new design.

RFQ پەیوەندی
ADS822EG4 - 10-Bit 40MSPS ADC w/ Int/Ext Ref | Texas Instruments
ADS822EG4

ADS822EG4 - 10-Bit 40MSPS ADC w/ Int/Ext Ref | Texas Instruments

The Texas Instruments ADS822EG4 is a 10-bit, 40-MSPS analog-to-digital converter (ADC) that supports both single-ended and fully differential analog inputs in a 28-pin SSOP package. According to the TI ADS822 datasheet, the device delivers 60 dB SNR and 72 dBFS SFDR while consuming only 190 mW, and offers a programmable input range with internal or external reference selection. The G4 suffix designates the tube-packaged, RoHS-compliant ordering option. An ADC (analog-to-digital converter) is a data-acquisition integrated circuit that samples a continuous analog waveform and quantizes each sample into a digital code word. ADCs sit inside the broader hierarchy of data converters -> signal chain -> mixed-signal IC -> semiconductor. The 10-bit resolution and 40 MSPS sample rate place the ADS822 in the mid-speed, moderate-resolution tier used in industrial imaging, instrumentation, and communications baseband processing where 60-70 dB of dynamic range is acceptable. Key performance features include 60 dB SNR for clean signal capture, 72 dBFS spurious-free dynamic range (SFDR) to keep large-signal harmonics below the noise floor, and low differential nonlinearity (DNL) of 0.x LSB for code-density accuracy. The internal 2.5 V reference can be overridden by an external reference for designs requiring absolute accuracy or multi-ADC gain matching. The single-ended / differential input mode is pin-programmable, eliminating external signal-conditioning op-amps in many designs. The ADS822 uses a pipelined architecture with digital error correction, providing low latency and consistent sample-to-sample linearity. A separate analog and digital supply pin pair (AVDD/DVDD) is provided to isolate switching noise from the sensitive analog front-end. An internal reference buffer and duty-cycle equalizer simplify PCB layout and clock distribution. Typical applications include CCD/camera imaging digitizers, baseband I/Q sampling in software-defined radio, ultrasonic medical imaging front-ends, and portable test-and-measurement equipment. The 5 V analog supply and 28-SSOP footprint make it compatible with legacy industrial designs migrating from 8-bit ADCs. When designing with this device, place a 0.1 uF ceramic decoupling capacitor as close as possible to each AVDD/DVDD pin, and provide a solid ground plane under the package. The internal reference mode requires a 0.1 uF bypass on REF; for multi-ADC synchronization, drive the external reference pin from a single low-impedance source. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet, including cross-references to the pin-for-pin compatible ADS823 (60 MSPS), ADS825 (40 MSPS, single-ended optimized), ADS826 (60 MSPS), and ADS828 (75 MSPS) parts.

RFQ پەیوەندی
ADS823E - 10-Bit 60-MSPS ADC | Texas Instruments
ADS823E

ADS823E - 10-Bit 60-MSPS ADC | Texas Instruments

The Texas Instruments ADS823E is a 10-bit, 60-MSPS, single-input pipelined analog-to-digital converter in a 28-pin SSOP package. It accepts single-ended or differential analog input, supports internal or external reference operation, operates from a single +5 V supply, and provides +3 V/+5 V-compatible logic I/O. Verified listings identify one input, one pipelined conversion channel, and a parallel interface. An ADC is a data-converter IC that samples an analog voltage and produces its corresponding digital code. The ADS823E belongs to the pipeline ADC class within the broader data-converter and signal-processing hierarchy. Pipeline conversion separates sampling and conversion stages, supporting high sampling rates for communications, instrumentation, imaging, and control systems while requiring careful clock, reference, input, and digital-interface design. Verified features include 60 dB signal-to-noise ratio, 74 dBFS spurious-free dynamic range, 265 mW power consumption, programmable input range, power-down capability, and low differential nonlinearity of 0.25 LSB. The dual input capability allows the converter to work with single-ended sources or differential signals. The internal/external reference option gives designers flexibility in analog calibration and system-level voltage-reference planning. The device uses a single-ended analog input or differential input arrangement and supports single +5 V analog-supply operation with +3 V or +5 V-compatible logic levels. Its 10-bit resolution gives 1024 digital codes, while the 60-MSPS sampling rate supports high-speed acquisition. The 28-SSOP package is a surface-mount gull-wing package, but the verified snippets do not provide its exact dimensions. Typical uses include communications receivers, medical imaging instrumentation, industrial data acquisition, signal monitoring, and embedded control systems where a compact high-speed ADC is required. The parallel output requires a 10-bit data bus plus associated clock and control signals, so the surrounding digital system must be designed for the converter's timing and voltage requirements. Designers should use the manufacturer datasheet for the complete pinout, timing, electrical limits, reference recommendations, and layout requirements. Because the supplied evidence does not include complete pricing, stock, lead-time, or all pin-level details, those items remain explicitly marked or unavailable rather than inferred.

RFQ پەیوەندی
ADS823EG4 - 10-Bit 60 MSPS ADC | Texas Instruments | SSOP-28
ADS823EG4

ADS823EG4 - 10-Bit 60 MSPS ADC | Texas Instruments | SSOP-28

Texas Instruments ADS823EG4 is a 10-bit, 60 MSPS single-channel analog-to-digital converter with a parallel data interface, housed in a 28-pin SSOP package. It supports single-ended or differential analog inputs, programmable input ranges, and internal or external reference options. The converter operates from -40°C to 85°C and is packaged in a tube for industrial-temperature production. An ADC is an analog-to-digital converter, a semiconductor that samples a continuous analog voltage and represents each sample as a digital number. A flash ADC uses internal comparators and resistor networks to implement conversion in parallel. The ADS823EG4 belongs to the ADC, data converter, and signal-processing IC hierarchy, making it suitable for systems that require rapid digitization of a single analog input. Key characteristics include 10-bit resolution, a 60 MSPS conversion rate, 60 dB signal-to-noise ratio, and 74 dBFS spurious-free dynamic range. Its 265 mW power figure supports power-conscious acquisition designs, while the selectable input topology accommodates both grounded single-ended sources and differential front ends. Programmable input range and low differential nonlinearity of 0.25 LSB are additional functional features. The parallel interface exposes converted samples directly to digital logic, reducing the need for a serializing stage and making the device appropriate for high-throughput sampling systems. Single-ended or differential operation gives the circuit designer flexibility when handling source impedance, common-mode voltage, and analog signal conditioning. Internal and external reference choices allow the system to balance integration, accuracy, and calibration requirements. Typical uses include industrial process monitoring, communications-channel digitization, laboratory instrumentation, waveform capture, radar or signal-analysis front ends, and embedded data-acquisition systems. The 60 MSPS rate is suitable for high-bandwidth intermediate-frequency or pulse-related measurements when the analog input is conditioned to preserve full-scale range and avoid clipping. The primary PCB constraints are clock and analog-signal integrity, reference decoupling, and careful grounding of the 28-pin SSOP footprint. The analog input and reference network should be placed close to the converter, while high-speed digital outputs require short routing with an appropriate return-path arrangement to limit coupling into the sensitive input stage. This product page organizes the ADS823EG4 specifications, verified drop-in considerations, application guidance, package information, and engineering trade-offs into a practical engineering reference. It also distinguishes the directly interchangeable family options from broader functional equivalents that require design review.

RFQ پەیوەندی
ADS824E - 10-Bit 70 MSPS ADC | Texas Instruments
ADS824E

ADS824E - 10-Bit 70 MSPS ADC | Texas Instruments

The Texas Instruments ADS824E is a 10-bit, 70 MSPS analog-to-digital converter with selectable single-ended or differential input, internal or external reference, programmable input range, power-down capability, and a 28-SSOP package. According to the verified manufacturer-related data, it provides 59 dB SNR, 70 dB SFDR, 0.3 LSB low DNL, 315 mW low power, single +5 V analog supply operation, and +3 V digital output capability. An ADC is an integrated circuit that samples an analog voltage and converts it into a digital code for processing, measurement, or communication. The ADS824E belongs to the ADC/DAC hierarchy and is suited to compact data-acquisition and signal-processing systems where sampling speed, input flexibility, and low power are more important than very high resolution. Its single-ended input supports single-ended signals, while differential operation can improve common-mode rejection and signal integrity when the source is balanced. The ADS824E combines a 70 MSPS conversion rate with a 10-bit quantizer and programmable analog input range. The verified feature summary identifies internal or external reference options, programmable input range, and power-down operation as useful controls for system integration. Its +3 V digital output capability can simplify interfacing to modern digital logic, while the single +5 V analog supply keeps the power architecture compact. The 315 mW power figure makes it relevant to power-conscious acquisition equipment. The converter is designed for applications requiring moderate resolution and high sampling throughput, including industrial instrumentation, communications receivers, waveform capture, sensor interfaces, and embedded control. Differential input can be preferred for noisy analog environments, while single-ended operation can simplify front-end design when the source is referenced to ground. The 28-SSOP package provides a conventional surface-mount footprint, but the exact pinout and mechanical drawing should be confirmed against the manufacturer datasheet before layout. Designers should treat the ADC input as a high-bandwidth analog signal path. Keep input routing short, provide a suitable reference and bypass network, and observe the supply, clock, grounding, and digital-output requirements in the datasheet. Do not assume that a converter with the same family name is a drop-in replacement unless the package, pin mapping, reference configuration, input range, timing, and electrical limits all match. This page combines verified ADS824E specifications, distributor availability information, package details, and practical replacement guidance. It is intended to help engineers evaluate the converter quickly while preserving the distinction between verified data, sourced alternatives, and parameters that require confirmation.

RFQ پەیوەندی
ADS825E - 10-Bit 40-MSPS Pipeline ADC | Texas Instruments
ADS825E

ADS825E - 10-Bit 40-MSPS Pipeline ADC | Texas Instruments

The Texas Instruments ADS825E is a 10-bit, 40-MSPS sampling analog-to-digital converter with one single-ended or differential input, housed in a 28-pin SSOP package. It supports internal or external references and includes programmable input attenuation. The verified device data identifies a 190 mW low-power figure, 60 dB SNR, 72 dBFS SFDR, and a 4.75 V operating-supply figure in the distributor description. A sampling ADC converts an analog waveform into a sequence of digital codes at a controlled sampling rate. The ADS825E belongs to the ADC, data-converter IC, and semiconductor hierarchies and is intended for systems that require modest resolution but relatively high conversion throughput. Its 10-bit quantizer provides 1,024 code levels, while the 40-MSPS sampling rate supports high-speed measurement, communications, industrial control, and instrumentation signal chains. Key features include 40-MSPS operation, 10-bit resolution, single-ended or fully differential input capability, and internal/external reference options. The verified feature summary reports 60 dB signal-to-noise ratio, 72 dBFS spurious-free dynamic range, and 190 mW power. ADS825E accepts a +3 V clock input according to the TI ADS825 product data, while the package is identified as SSOP-28. These attributes make the converter suitable when compact size and conversion speed matter more than 12-bit or higher numerical resolution. The TI ADS825 family is described as pin-for-pin compatible with the 10-bit ADS823, ADS826, and ADS828 families in SSOP-28. This compatibility supports upgrade paths to higher sampling frequencies, although the replacement must be checked for the exact electrical requirements of the target system. The ADS825E also supports power-down operation and programmable input attenuation according to the family-level description, helping designers manage power and signal conditioning requirements. Typical applications include industrial process measurement, communications infrastructure, test equipment, motor-control feedback, and embedded signal acquisition. In a motor-control system, the ADC can sample current or position feedback, while in communications equipment it can digitize intermediate-frequency or baseband signals. Differential operation can improve common-mode rejection in balanced analog front ends, while single-ended operation simplifies lower-cost sensor interfaces. The verified distributor listing describes the ADS825E as a 10-bit ADC with one input, pipelined architecture, and internal/external reference capability. A key design consideration is analog-input conditioning. The input range, reference choice, clock amplitude, source impedance, and sampling network must be verified against the manufacturer datasheet before layout is finalized. This page consolidates verified distributor information, family compatibility data, pin-compatible alternatives, and application guidance that is not typically available from a basic distributor search result.

RFQ پەیوەندی
ADS825E/1K - 10-Bit 40-MSPS ADC | Texas Instruments
ADS825E/1K

ADS825E/1K - 10-Bit 40-MSPS ADC | Texas Instruments

The Texas Instruments ADS825E/1K is a 10-bit, 40-MSPS sampling analog-to-digital converter with single-ended or fully differential inputs, housed in a 28-pin SSOP package. It accepts a single +5 V supply or a +5 V supply with +5 V-compatible logic I/O, supports internal or external reference operation, and provides a programmable input range for flexible signal-chain design. An ADC is an analog-to-digital converter, a semiconductor that samples a continuous voltage and produces a corresponding digital code for processing, storage, or transmission. The ADS825 belongs to the ADC hierarchy, combining a high-bandwidth sampling architecture with a 10-bit quantizer. Its pipeline operation supports 40 MSPS conversion while maintaining the input flexibility needed for instrumentation, communications, and embedded signal-processing systems. The main performance features include 60 dB signal-to-noise ratio, 72 dBFS spurious-free dynamic range, and low differential nonlinearity of 0.5 LSB. Power consumption is 190 mW, while internal and external reference options permit the analog front end to use either the on-chip reference or a system-level voltage. Single-ended and fully differential input modes also support different source architectures and signal-conditioning requirements. At the center of the device is a 10-bit, 40-MSPS sampling ADC with a high-bandwidth track-and-hold stage. The pipeline architecture converts successive samples at a maximum rate of 40 million samples per second. Differential nonlinearity below 1 LSB is important for uniform code transitions, while the 60 dB SNR and 72 dBFS SFDR help preserve small-signal information and limit unwanted harmonic content in sampled waveforms. Typical applications include communications receivers, industrial monitoring, data acquisition, medical instrumentation, and embedded control systems. Single-ended inputs are useful when the source is referenced to a common ground, while fully differential operation can improve rejection of common-mode noise in balanced systems. The internal reference simplifies standalone converter designs, whereas external-reference operation supports synchronized or precision multi-channel systems. Designers should pay particular attention to input range, reference selection, digital interface timing, and decoupling. The manufacturer identifies the ADS825 as pin-for-pin compatible with the ADS822, ADS823, ADS826, and ADS828 families in the SSOP-28 package, providing a useful upgrade path when conversion speed requirements change. Verify the exact input, reference, and digital timing configuration before replacing one family member with another. This page combines manufacturer specifications, package compatibility information, practical design guidance, and a parameter-focused comparison of supported alternatives. It is intended to help engineers determine whether the ADS825E/1K provides the required resolution, throughput, interface, and package compatibility without overlooking changes in speed or analog configuration.

RFQ پەیوەندی
ADS826E - 10-Bit, 60-MSPS Pipelined ADC | Texas Instruments
ADS826E

ADS826E - 10-Bit, 60-MSPS Pipelined ADC | Texas Instruments

The Texas Instruments ADS826E is a 10-bit, 60-MSPS single-channel pipelined analog-to-digital converter with a 28-pin SSOP package. Its headline specifications are 60 MSPS conversion throughput, 60 dB signal-to-noise ratio, 74 dBFS spurious-free dynamic range, and 265 mW typical power consumption. The ADC supports single-ended or differential analog input, internal or external reference operation, programmable input range, and compatibility with +3 V or +5 V digital logic. An ADC converts an analog voltage into a digital code so that a processor, FPGA, DSP, or control system can process physical signals. The ADS826E belongs to the pipelined ADC class, a high-speed architecture commonly used in communications, instrumentation, industrial control, radar, and test equipment. Its 10-bit resolution represents 1,024 digital levels, making it suitable for applications where sample speed is more important than very fine amplitude resolution. Key features include low differential nonlinearity of 0.25 LSB, a programmable analog input range, a power-down function, and single +5 V analog operation. The supported single-ended and differential input modes provide flexibility for source arrangements and signal conditioning. Internal or external reference selection allows the converter to fit designs with different accuracy and scaling requirements. The 28-SSOP package supports conventional PCB assembly but occupies more board area than a small QFN package. The ADS826E uses a proprietary pipelined conversion method, as identified by the verified distributor and datasheet listings. The architecture supports continuous high-rate sampling while retaining a compact 28-pin SSOP package. Its +3 V/+5 V logic compatibility helps simplify interfacing with digital controllers, although the digital input thresholds, timing, and supply sequencing must still be checked against the manufacturer datasheet before layout release. Typical applications include communications receivers, data acquisition front ends, industrial measurement systems, oscilloscope and instrumentation channels, digital feedback and control loops, and embedded signal processing. For a new design, verify the required input range, reference source, digital interface timing, power sequencing, and thermal performance in the official ADS826E datasheet. Pricing and availability should also be checked with authorized distributors because the verified search data does not provide a current numeric price or lead time. A key design consideration is the analog input network. Input impedance, source capacitance, full-scale range, and the selected differential or single-ended topology must be evaluated together. Keep routing compact, provide the required bypass capacitors, and control clock and digital-output crosstalk. Because the verified data identifies the converter as a 60-MSPS, 10-bit pipelined ADC, PCB signal-integrity and clock routing decisions can materially affect sampling accuracy. This page consolidates the verified specifications, package information, source links, application guidance, and comparison framework for the ADS826E. It does not invent unavailable electrical values, pricing, pin names, lifecycle claims, or replacement specifications; unavailable items are marked for data completion instead.

RFQ پەیوەندی
ADS826E-BB - 10-Bit 60MHz ADC | Texas Instruments
ADS826E-BB

ADS826E-BB - 10-Bit 60MHz ADC | Texas Instruments

Texas Instruments ADS826E-BB is a 10-bit, single-input pipelined analog-to-digital converter with a 60 MHz maximum sampling frequency, 0.25 LSB nonlinearity, and a 28-pin SSOP package. It operates from a 4.75 V to 5.25 V supply across the -40°C to +85°C temperature range. The ADS826E-BB is designed for high-speed data acquisition, signal measurement, communications, and industrial control systems requiring compact 10-bit conversion performance. An ADC is a data-acquisition integrated circuit that converts an analog voltage into a digital code for processing by a microcontroller, DSP, FPGA, or other digital logic. The pipelined ADC architecture belongs to the broader semiconductor hierarchy of data-converter ICs, analog-to-digital converters, and signal-chain semiconductors. By sampling at up to 60 MHz, this converter supports rapidly changing waveforms while retaining the simplicity of a 10-bit output interface. Key characteristics include 10-bit resolution, one analog input, 60 MHz sampling, 0.25 LSB nonlinearity, and operation from 4.75 V to 5.25 V. The single-ended input arrangement simplifies connection to sensors, signal-conditioning circuits, and external analog front ends. Its 28-pin SSOP package provides a compact surface-mount option for equipment where PCB area is constrained but conversion throughput remains important. The pipelined architecture separates the conversion process into multiple internal stages. This approach supports high sampling rates, although overall system accuracy still depends on the reference voltage, analog input drive, clock quality, grounding, output-data interpretation, and input bandwidth. The 10-bit resolution produces 1,024 digital codes, making the device appropriate for measurement and control systems that do not require the resolution of a 12-bit or 16-bit converter. Typical applications include industrial process monitoring, communications receivers, waveform capture, instrumentation, embedded data acquisition, and control-loop signal sampling. It is particularly useful when 60 MHz throughput and 10-bit resolution provide a better balance than a slower high-resolution converter. In a complete acquisition chain, the ADS826E-BB follows an amplifier or sensor interface and precedes a digital controller that captures and processes the conversion codes. A critical design consideration is the analog reference and input implementation. Use the manufacturer's pin-description table and recommended application circuit when assigning PCB tracks, decoupling capacitors, and signal-conditioning components. Keep the analog input path short, provide a stable reference and clock, and follow the layout guidance for a high-speed pipelined converter to minimize sampling error and digital coupling. This product page combines the exact ADS826E-BB ordering information with the converter's principal electrical characteristics, pin-compatible family alternatives, and practical PCB and signal-integrity guidance. It also provides application-focused guidance for designers evaluating whether the 10-bit, 60 MHz ADS826E-BB fits a specific data-acquisition, communications, or industrial-control design.

RFQ پەیوەندی
ADS826E/1K - 10-Bit 60-MSPS ADC | Texas Instruments
ADS826E/1K

ADS826E/1K - 10-Bit 60-MSPS ADC | Texas Instruments

The Texas Instruments ADS826E/1K is a 10-bit, single-channel pipelined analog-to-digital converter sampling at 60 MSPS, with single-ended or differential input support and a 28-pin SSOP package. It operates from a nominal 5 V supply and is specified for industrial temperatures from -40°C to +85°C. The parallel 10-bit output supports high-speed data acquisition, while an internal reference can be disabled in favor of an external reference. An ADC is an analog-to-digital converter, a data-acquisition IC that samples a continuous voltage and converts it into a numeric value. The ADS826E belongs to the pipelined ADC hierarchy, with architecture optimized for conversion speed, parallel data transfer, and applications requiring repeated sampling at high rates. Its place within the broader semiconductor hierarchy is signal-chain interface IC, suitable for industrial measurement, communications, instrumentation, and embedded control systems. Key features include 10-bit resolution, a 60 MSPS conversion rate, one input channel, proprietary pipelined conversion, parallel word access, and CMOS construction. The differential-input option supports balanced analog signaling, while single-ended operation accommodates common source-referenced signals. Internal-reference operation simplifies standalone designs, and external-reference support allows designers to improve stability, scale the conversion range, or share a precision reference across multiple converters. The parallel interface makes the ADS826E especially appropriate for systems in which the ADC can connect directly to a field-programmable gate array, digital signal processor, or dedicated data-capture logic. At 60 MSPS, it can capture 60 million conversion results per second. Designers should account for acquisition timing, output settling, clock jitter, analog input bandwidth, and digital data-capture latency when sizing the surrounding signal chain. Typical applications include communications infrastructure, industrial data acquisition, instrumentation, control systems, test equipment, and embedded signal processing. The differential-input architecture is useful when the source has low amplitude or when common-mode noise must be rejected. A parallel-output system may require careful partitioning between the analog input stage, clock source, logic device, memory, and downstream processor. Place the analog input and reference circuitry close to the converter, provide a clean return path for each analog input, and route the 10-bit output bus away from high-current switching nodes. Clock and output timing depend on the complete board environment, so use the acquisition timing diagrams in the manufacturer datasheet to establish setup and hold requirements for the connected digital logic. This page combines the device specifications, compatible family options, interface timing considerations, and application guidance needed for initial design review. It also identifies where a design engineer must verify the complete pin assignment and timing details in the manufacturer datasheet before releasing a PCB layout.

RFQ پەیوەندی
ADS8284IRGCR - 18-Bit 1MSPS 4-Ch SAR ADC w/ PGA | TI
ADS8284IRGCR

ADS8284IRGCR - 18-Bit 1MSPS 4-Ch SAR ADC w/ PGA | TI

The Texas Instruments ADS8284IRGCR is an 18-bit, 1-MSPS, pseudo-bipolar differential successive-approximation-register (SAR) analog-to-digital converter with an integrated on-chip ADC driver (OPA) and a 4-channel differential input multiplexer, packaged in a 64-pin VQFN (RGC) measuring 9 mm x 9 mm. The device integrates a low-noise programmable-gain amplifier, a 4-channel analog multiplexer, and the SAR ADC core, forming a complete analog front-end in a single chip. Operating from -40 C to +85 C industrial temperature range, it offers zero latency at full throughput, making it suitable for multi-channel data-acquisition systems. A SAR (successive-approximation-register) ADC is a type of Nyquist-rate converter that uses a binary-search algorithm and an internal DAC to digitize an analog input one bit at a time per clock cycle. SAR ADCs are valued for their deterministic latency, high accuracy, and lack of pipeline delay, sitting within the broader hierarchy of analog-to-digital converters (ADC) -> data converters -> mixed-signal ICs -> semiconductors. The ADS8284's pseudo-bipolar differential input architecture allows true differential signal acquisition with excellent common-mode rejection. Key features include 18-bit resolution with no missing codes, 1 MSPS guaranteed throughput, on-chip 4-V internal reference, integrated programmable-gain amplifier (PGA) with gain settings up to 4, and 4-channel differential input multiplexer. The integrated driver and reference reduce external component count, while the parallel digital interface simplifies connection to FPGAs, DSPs, and microcontrollers. The QFN-64 package provides a compact footprint with an exposed thermal pad for heat dissipation. Typical applications include industrial process control, multi-channel data acquisition systems, medical instrumentation, optical networking power monitoring, and high-precision multi-axis servo control. The 4-channel input multiplexer allows time-multiplexed acquisition of up to four differential signals per IC, reducing board space and BOM cost in multi-sensor systems. Designers should pay close attention to PCB layout guidelines: route analog and digital grounds separately and join at a single point, place decoupling capacitors as close to the supply pins as possible, and use the exposed thermal pad for heat spreading. The on-chip reference requires an external bypass capacitor; refer to the datasheet for the recommended value. This page synthesizes distributor pricing, drop-in replacement alternatives, and practical design notes not found in the manufacturer datasheet. Engineers searching for multi-channel 18-bit SAR ADC solutions will find the integrated PGA and multiplexer of the ADS8284IRGCR to be a compelling, board-space-saving alternative to discrete ADC + driver + MUX implementations.

RFQ پەیوەندی
ADS828E - 10-Bit 75-MSPS Pipeline ADC | Texas Instruments
ADS828E

ADS828E - 10-Bit 75-MSPS Pipeline ADC | Texas Instruments

The Texas Instruments ADS828E is a 10-bit, 75-MSPS single-input pipeline analog-to-digital converter operating from a single +5 V supply in a 28-pin SSOP package. According to the TI product page, the converter supports single-ended input and can also be operated differentially for improved spurious performance. Its pipeline architecture supports 75 million samples per second, while the 10-bit quantizer targets applications requiring compact, high-speed digitization with parallel data output. An ADC is an analog-to-digital converter, a semiconductor that samples an analog voltage and converts it into a digital code for processing, storage, measurement, or transmission. The ADS828 belongs to the pipeline ADC and data-converter hierarchy, where internal stages operate in sequence to balance conversion speed with circuit complexity. The ADS828E is therefore positioned between general-purpose low-speed ADCs and more complex high-resolution high-speed converters. Key verified features include a resolution of 10 bits, a maximum sampling rate of 75 MSPS, one input, a pipelined architecture, and a 28-pin SSOP package. TI states that the ADS828 is pin compatible with the 10-bit, 40 MSPS ADS822 and ADS825, and with the 10-bit, 60 MSPS ADS823 and ADS826. That compatibility makes the ADS828E a potential board-level upgrade path when a design needs more sampling speed without changing its ADC footprint. The ADS828E is a pipeline CMOS ADC designed around single-ended input operation and differential operation for added spurious performance. Differential operation can help reduce common-mode sensitivity and may improve signal integrity when the analog front end and routing are designed appropriately. The exact input range, reference requirements, output timing, power consumption, and electrical limits were not supplied in the verified search excerpts, so those values must be confirmed in the manufacturer datasheet before design release. Typical uses include industrial control and data acquisition, communications infrastructure, instrumentation, signal monitoring, and embedded measurement systems. A 75-MSPS conversion rate is useful when the system must sample waveforms or rapidly changing analog signals, while 10-bit resolution suits control loops, diagnostics, and digital signal processing stages that do not require very high spectral resolution. The single +5 V supply also simplifies system power architecture compared with converters requiring multiple rails. The primary design consideration is to preserve analog signal integrity from the sensor or amplifier through the ADC input. Use short, controlled-impedance routing, a stable reference arrangement, and decoupling appropriate to the manufacturer recommendations. Confirm acquisition timing, output interface, input range, and clock polarity against the ADS828 datasheet. The page also identifies compatible ADS822E, ADS825E, ADS823E, and ADS826E family options, but their differing sampling rates should be treated as functional trade-offs rather than identical replacements. This product record consolidates the verified TI specifications, distributor identification, package information, and documented pin-compatible family references into an engineering-oriented selection and design reference.

RFQ پەیوەندی
ADS830E - 8-Bit 60MSPS Pipeline ADC | Texas Instruments
ADS830E

ADS830E - 8-Bit 60MSPS Pipeline ADC | Texas Instruments

The Texas Instruments ADS830E is an 8-bit, 60 MSPS pipelined Analog-to-Digital Converter (ADC) housed in a 20-pin SSOP package, designed for high-speed signal acquisition from a single +5V supply. Key specifications include 60 MHz maximum sampling rate, 49.5 dB SNR, and 170 mW typical power dissipation. The part supports an internal or external reference and offers both single-ended and differential analog inputs with a programmable input range of 1 Vp-p or 2 Vp-p, with the single-ended input span of 1.5V to 3.5V centered at 2.5V. The ADS830E employs a pipelined CMOS architecture with an internal high-bandwidth track-and-hold and 8-bit quantizer. DNL is specified at 0.2 LSB, preserving linearity for accurate signal capture. The architecture supports an internal reference or an external reference, giving designers flexibility in frequency planning and absolute accuracy. Typical applications include medical imaging front-ends, video digitizing systems, CCD/camera signal processing, IF sampling in communications, and portable instrumentation. The 60 MSPS sampling rate enables full baseband capture of standard-definition video and intermediate-frequency downconversion paths up to several tens of MHz. When designing with the ADS830E, ensure the analog input network is configured to either single-ended (1 Vp-p or 2 Vp-p) or differential topology per the programmable range. Bypass the analog supply pin with a 0.1 uF ceramic capacitor placed within 5 mm of the pin, and keep digital outputs routed away from analog inputs to minimize coupling. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
ADS830E/2K5 - 8-Bit 60 MSPS ADC | Texas Instruments
ADS830E/2K5

ADS830E/2K5 - 8-Bit 60 MSPS ADC | Texas Instruments

The Texas Instruments ADS830E/2K5 is an 8-bit, 60 MSPS pipelined CMOS analog-to-digital converter with single-ended or differential input, selectable internal or external reference, and a 20-pin SSOP package. It operates from a single +5 V supply and consumes 170 mW, making it suitable for compact, high-speed signal-processing systems. An ADC is a data-converter IC that samples an analog voltage and converts it into a digital code for processing, storage, or transmission. The ADS830 belongs to the pipelined ADC hierarchy, where internal stages operate concurrently to achieve a high sampling rate. Its 8-bit quantizer represents each sampled analog level with eight bits, providing a compact data path for video digitization, medical imaging, communications, and instrumentation. Principal specifications include a maximum sampling frequency of 60 MSPS, 49.5 dB signal-to-noise ratio, 0.2 LSB differential nonlinearity, and 170 mW power consumption. The analog input can be single-ended or differential, while the input range is programmable to support different signal amplitudes. An internal reference option reduces external circuitry, although an external reference can be selected when system-level accuracy requires it. The converter uses a high-bandwidth track-and-hold circuit preceding its pipelined 8-bit quantizer. This architecture supports rapid conversion rates and provides separate single-ended or differential operating modes. Texas Instruments describes the device as pin-for-pin compatible with the 8-bit, 80 MSPS ADS831, allowing a board to support a faster sampling option without changing its SSOP-20 footprint. Typical applications include medical-imaging signal chains, video digitization, communications equipment, and test instrumentation. The 60 MSPS rate is appropriate for digitizing intermediate-frequency or sampled-video waveforms, while differential operation can improve rejection of common-mode noise in balanced analog circuits. The single +5 V supply also simplifies integration with conventional +5 V digital processing logic. Design the input network for the selected single-ended or differential range and account for the ADC input bandwidth when placing the sampling circuit. Reference and supply decoupling should be placed close to their associated pins, while high-speed routing requires short, controlled-impedance connections and a quiet return path. Confirm timing for the parallel output interface against the acquisition clock and downstream logic. This page combines the manufacturer specifications, drop-in compatibility information, application guidance, and engineering design notes in one searchable reference. The comparison table and selection guide clarify when the 60 MSPS ADS830E/2K5 or the faster pin-compatible ADS831 is the appropriate choice for a new design.

RFQ پەیوەندی
ADS830EG4 - 8-Bit 60MSPS Pipelined ADC | Texas Instruments
ADS830EG4

ADS830EG4 - 8-Bit 60MSPS Pipelined ADC | Texas Instruments

The Texas Instruments ADS830EG4 is an 8-bit, 60-MSPS pipelined CMOS Analog-to-Digital Converter (ADC) that operates from a single +5V power supply, housed in a 20-pin SSOP package. It provides excellent dynamic performance with a single-ended input and can also be operated with a differential input for improved spurious performance. The device includes an 8-bit quantizer, high-bandwidth track-and-hold, and a high-accuracy internal reference, making it suitable for high-speed signal acquisition. The G4 suffix indicates a Pb-free (lead-free) green RoHS-compliant package version supplied in tape and reel. An Analog-to-Digital Converter (ADC) is a semiconductor device that converts real-world analog signals into discrete digital codes for processing by microcontrollers, DSPs, or FPGAs. Within the broader signal chain hierarchy, an ADC sits between a sensor/amplifier front end and a digital processor; pipeline ADCs use a multi-stage architecture to achieve high sampling rates (tens to hundreds of MSPS) at moderate resolution (8-14 bits), trading latency for speed. The ADS830 belongs to the pipelined ADC subcategory, which is the dominant architecture for communications, video, and imaging applications requiring both high sample rate and continuous streaming conversion. Key features of the ADS830EG4 include a maximum sampling rate of 60 MSPS, single-ended input range of 1.5V to 3.5V (programmable), and a pipelined architecture with internal reference. The device supports both single-ended and differential input modes and is pin-for-pin compatible with the 8-bit, 80-MHz ADS831 for upgrade flexibility. Power consumption is approximately 215 mW at 60 MSPS from a single +5V analog supply, with a power-down mode available for low-duty-cycle applications. The ADS830EG4 is commonly used in digital communications (IF sampling, QAM demodulation), video digitisation (broadcast equipment, professional cameras), CCD imaging scanners, and portable instrumentation. Its single +5V operation simplifies power-tree design in legacy +5V systems, while the SSOP-20 footprint eases hand-soldering and rework in low-volume production. Differential-input mode further enables low-distortion sampling of transformer-coupled IF signals in software-defined radio receivers. When designing with this device, pay attention to input common-mode voltage and reference decoupling. Use a low-impedance analog ground plane, place the input coupling capacitor close to the AIN pin, and provide a clean +5V AVDD rail with 0.1uF and 10uF decoupling. For best SFDR in IF-sampling applications, operate the input in differential mode with a wideband balun. Refer to the TI ADS830 datasheet (SBAS167 family) for full application-circuit recommendations and timing diagrams. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی