ADC/DAC
بەرهەمەکان (3,600+)
ADS8482IBRGZR - 18-Bit 1MSPS SAR ADC w/ Internal Ref | Texas Instruments
The Texas Instruments ADS8482IBRGZR is an 18-bit, 1-MSPS successive-approximation-register (SAR) analog-to-digital converter with an internal 4.096 V reference and a pseudo-bipolar, fully differential input, housed in a 48-pin VQFN (RGZ) 7x7 mm package. The converter includes an inherent sample-and-hold front end and offers three interface modes: a full 18-bit parallel bus, a 16-bit option using two read cycles, and an 8-bit bus option using three read cycles, allowing seamless pairing with 8-bit, 16-bit, or 32-bit microcontrollers and DSPs. An SAR ADC is a type of data converter that uses a binary-search algorithm against an internal precision DAC to resolve the input voltage in a fixed number of clock cycles, producing a single-shot conversion with no pipeline latency. SAR ADCs sit within the broader data-converter hierarchy of analog-to-digital converters (ADC) -> data converters -> signal chain -> mixed-signal IC. Compared to delta-sigma or pipeline ADCs, SAR parts like the ADS8482 trade raw speed or oversampling for guaranteed single-cycle latency and deterministic DC behavior, which is why they dominate multiplexing, control-loop, and precision instrumentation front ends. Key specifications include 1 MSPS throughput, 18-bit resolution with no missing codes, an integrated low-drift 4.096 V reference, and a fully differential input that accepts pseudo-bipolar signals. The device supports 3 V or 5 V digital I/O and operates from -40C to +85C industrial temperature range. Its micropower dissipation makes it suitable for multi-channel data-acquisition boards where heat and battery life matter, and the parallel interface simplifies connection to FPGAs, ASICs, and high-speed microcontrollers without requiring a serial-port configuration. The internal architecture uses a charge-redistribution capacitor DAC array combined with a precision bandgap reference and an input sample-and-hold, achieving high DC accuracy and low aperture uncertainty. The pseudo-bipolar differential input allows the converter to digitize signals swinging around a common-mode voltage, eliminating the need for an external instrumentation amplifier in many cases. The configurable bus width (18/16/8 bits) is implemented through hardware mode pins, giving the system designer flexibility for legacy host processors without a full 18-bit port. Typical applications include medical instrumentation such as patient monitoring and diagnostic imaging front ends, industrial process control and multi-channel data-acquisition systems, optical networking power monitoring, precision weigh scales, and seismic or vibration analysis equipment. The combination of 18-bit resolution, 1 MSPS speed, and integrated reference lowers the BOM for high-accuracy systems. When designing with the ADS8482IBRGZR, provide a low-impedance input buffer and place the bypass capacitors as close to the supply pins as possible to maintain linearity at 1 MSPS. The internal reference eliminates the need for an external reference IC, but its decoupling must follow the datasheet layout recommendations for full SNR performance. This page consolidates manufacturer specifications, distributor pricing, and pin-compatible alternatives into a single engineering reference not available on the TI datasheet alone.
ADS8482IRGZR - 18-bit 1MSPS SAR ADC w/Internal Ref | TI
The Texas Instruments ADS8482IRGZR is an 18-bit, 1-MSPS successive-approximation-register (SAR) analog-to-digital converter with an internal 4.096 V reference and a pseudo-bipolar, fully differential input, housed in a 48-pin VQFN (RGZ) 7x7 mm package. The device integrates an 18-bit capacitor-based SAR core with inherent sample-and-hold, supports a parallel interface with selectable 18-bit, 16-bit (two read cycles), or 8-bit bus (three read cycles) data widths, and operates over the industrial -40C to +85C temperature range. An SAR (Successive Approximation Register) ADC is a precision data-converter architecture that uses an internal binary-search algorithm against a precision DAC to resolve a single input sample per conversion cycle. SAR ADCs occupy the middle ground between slow, ultra-precise delta-sigma ADCs and fast but lower-resolution flash ADCs, and are widely used in industrial process control, instrumentation, and medical imaging where single-shot accuracy at moderate sample rates is required. The ADS8482 family sits in the power-management-and-conversion IC hierarchy: ADC -> data converter -> signal-chain IC -> mixed-signal semiconductor. Key differentiating specifications include 1 MSPS guaranteed throughput, an internal low-drift 4.096 V reference that eliminates an external reference IC, true 18-bit no-missing-codes performance, 1 LSB (max) INL and DNL, pseudo-bipolar fully differential inputs accepting ±VREF, and a 48-pin VQFN PowerPAD that keeps theta_JA low enough for industrial operation without a heatsink. The wide digital-interface flexibility (18/16/8-bit) lets designers connect it directly to 8-bit microcontrollers, 16-bit DSPs, or 18-bit ASICs without external glue logic. Architecturally, the ADS8482 combines a charge-redistribution SAR DAC, an on-chip precision bandgap reference, a differential input front end, and a digital interface engine that supports byte, word, and full-word readback. The pseudo-bipolar input accepts signals from -VREF to +VREF around mid-scale (2.048 V), which simplifies signal conditioning for many sensor-bridge and bipolar transducer outputs. Typical applications include medical imaging front ends, industrial process-control data acquisition cards, precision weigh scales, optical sensor interfaces, and vibration analysis. The 1 MSPS throughput and 18-bit resolution make it a strong fit for multiplexed multi-channel systems where one ADC serves many slow sensors. A primary design consideration is bypassing: the reference pin and AVDD rails each require a low-ESR ceramic plus bulk capacitor placed within a few millimeters of the package to achieve the datasheet SNR and DNL. Pseudo-bipolar inputs must be DC-biased to mid-scale via high-impedance resistor networks to avoid clipping on negative excursions. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.
ADS8484IBRGZR - 18-Bit 1.25MSPS SAR ADC | Texas Instruments
The Texas Instruments ADS8484IBRGZR is an 18-bit, 1.25-MSPS successive-approximation analog-to-digital converter with an internal 4.096-V reference and a pseudo-bipolar, fully differential input, housed in a 48-pin VQFN (RGZ) 7x7 mm package. It features ±1-LSB INL max, ±0.5-LSB DNL, and single +5V analog supply operation, drawing only 100 mW of power at full sample rate. An SAR ADC (Successive Approximation Register Analog-to-Digital Converter) is a type of high-precision data converter that uses a binary search algorithm against an internal DAC to resolve each input sample to N bits in N clock cycles. SAR ADCs occupy the middle ground between flash converters (fast, low resolution) and sigma-delta converters (very high resolution, slow). They combine low latency, deterministic latency, and high accuracy - making them the dominant architecture for industrial data acquisition, instrumentation, and control loops where every microsecond counts. Key features of the ADS8484IBRGZR include a capacitor-based charge-redistribution SAR core with inherent track-and-hold, selectable 8-/16-/18-bit parallel bus interfaces, an internal low-drift 4.096-V reference, and a fully differential analog input that accepts pseudo-bipolar input ranges of ±VREF around an input common-mode of +2.5V. The device supports a hardware-friendly parallel MCU/DSP interface and offers an active-low CONVST pin for precise sampling control. Architecturally, the ADS8484IBRGZR uses a charge-redistribution SAR core with input ESD diodes and on-chip reference buffer. The differential input structure rejects common-mode noise from the analog front end, while the internal reference eliminates the need for an external precision reference - simplifying BOM cost and PCB area. This makes it suitable for high-density industrial layouts where each square centimeter matters. Typical applications include industrial process control loops, multi-channel data acquisition systems (DAQ) for factory automation, medical instrumentation including portable patient monitoring, precision weigh scales, vibration analysis, optical sensor front ends, motor control current sensing, and test and measurement equipment. The wide input common-mode tolerance also suits battery-management systems where ground potentials vary across the system. When designing with this ADC, ensure the analog and digital supply pins each have local decoupling: a 10 uF tantalum plus 0.1 uF ceramic placed within 5 mm of the AVDD/DVDD pins. Keep digital return currents (DB[17:0], CONVST, /CS, /RD) physically separated from the analog return plane to avoid code-dependent noise coupling into the SAR comparator. This page synthesizes distributor pricing, drop-in alternatives including same-package ADS8484 variants, and practical design notes not found in the manufacturer datasheet.
ADS8505IDBRG4 - 16-Bit 250kSPS SAR ADC w/Parallel Interface | TI
The Texas Instruments ADS8505IDBRG4 is a 16-bit, 250-kSPS successive-approximation analog-to-digital converter with a standard ±10-V (also ±5 V and ±3.3 V) input range, integrated 2.5 V reference, and a parallel microprocessor interface, packaged in a 28-pin SSOP (DB) with tape-and-reel packaging. What is a SAR ADC? A successive-approximation-register analog-to-digital converter is a precision data-conversion architecture that uses a binary-search algorithm against an internal DAC and comparator to resolve N bits in N clock cycles. SAR ADCs sit in the broader taxonomy of ADCs -> data converters -> signal chain ICs -> mixed-signal semiconductors, combining low power consumption, deterministic latency, and high DC accuracy. They are preferred over delta-sigma converters in multiplexed, multi-channel data-acquisition systems where latency and per-channel settling matter. Key features include ±1.5 LSB maximum INL, ±105 dB SFDR at the 250 kHz sample rate, single +5 V analog supply operation, and ±10 V true bipolar input range using on-chip input scaling resistors. The device integrates a high-bandwidth track-and-hold, internal 2.5 V reference, and 3-state output drivers, eliminating the need for an external reference or high-current bus interface. The 28-SSOP package provides a low-profile surface-mount footprint suitable for compact data-acquisition front ends. Architecturally, the ADS8505 uses a charge-redistribution capacitor DAC combined with a low-noise comparator and a precision laser-trimmed input resistor ladder. The capacitor array produces inherently low digital noise and high spurious-free dynamic range because the SAR switching pattern generates minimal kickback at the input. The internal reference and full-scale calibration registers deliver guaranteed INL/DNL across the industrial temperature range. Typical applications include industrial process control, multi-channel data-acquisition systems, instrumentation and test equipment, medical imaging front ends, and precision sensor signal conditioning. The ±10 V input range and 16-bit resolution enable direct connection to legacy industrial transducers and 4-20 mA loop receivers without external signal conditioning. When designing with this part, note that the parallel interface requires careful PCB routing to avoid digital crosstalk into the analog inputs; keep the digital bus traces short and guard the analog ground plane. The internal reference requires an external bypass capacitor; consult the datasheet for the recommended capacitor value and ESR range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving procurement and design engineers a single reference for the ADS8505IDBRG4.
ADS8508IBDWRG4 - 12-Bit 250kSPS Serial CMOS ADC | Texas Instruments
The Texas Instruments ADS8508IBDWRG4 is a 12-bit, 250-kSPS successive-approximation-register (SAR) analog-to-digital converter with a serial interface, housed in a 20-pin SOIC (DW) wide-body package. It accepts ±3.33V, ±5V, and ±10V bipolar input ranges through an on-chip input resistor divider, and provides 73 dB SINAD, ±0.45 LSB INL typical linearity, and a single 5V analog supply. The device integrates sample-and-hold, internal clock, internal 2.5V reference, and a high-speed synchronous serial data output. An SAR ADC is a type of data converter that uses a binary-search successive approximation algorithm to digitize an analog input one bit at a time per clock cycle. SAR converters sit in the broader hierarchy: ADC -> data converter -> signal-chain IC -> mixed-signal semiconductor. They are valued for low latency, deterministic behavior, and excellent DC accuracy, making them a popular alternative to delta-sigma and pipeline architectures in multiplexed data-acquisition systems. Key features include 250 kHz throughput, hardware- or software-controlled conversion start, an external/internal clock select for the serial data frame, and TAG-input capability for multi-channel systems. The internal reference is trimmed for low drift, and the bipolar input range eliminates external signal-conditioning in industrial ±10V or ±5V transducer interfaces. The serial interface (SPI-/QSPI-/Microwire-compatible) reduces board-routing complexity versus parallel ADCs. Typical applications include industrial process control (4-20 mA loop digitization), multi-channel data-acquisition front ends, portable instrumentation, and test/measurement equipment. The wide input range supports direct connection to transducers, sensors, and bipolar signal sources without external op-amp scaling. When designing with this device, ensure the analog and digital grounds are tied at the package via a low-impedance star connection, and place 10 µF + 0.1 µF decoupling on AVDD+ and DVDD. The BW pad is the bipolar common-mode return; keep its trace short. Do not exceed 7 V absolute on analog inputs without external clamping. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
ADS8509HDB - 16-Bit 250kSPS SAR ADC, ±10V In | Texas Instruments
The Texas Instruments ADS8509HDB is a 16-bit, 250-kSPS, single-channel successive-approximation-register (SAR) analog-to-digital converter (ADC) with programmable (±10 V, ±5 V, or ±3.3 V) bipolar input ranges and a serial (SPI-compatible) data interface, housed in a 28-pin SSOP package rated for the high-temperature –40 °C to +175 °C operating range. An SAR ADC is a type of data converter that performs a binary search across an internal capacitor-based DAC to resolve each analog sample in a single conversion cycle, making it ideal for multiplexed data-acquisition systems where low latency and deterministic behavior matter more than raw speed. The ADS8509 family extends this architecture with bipolar true-differential inputs, a 2.5 V internal reference, and a sample-and-hold front-end that simplifies signal-chain design by eliminating the need for an external front-end buffer or precision reference. It is part of the broader category of precision ADCs in the data-converter IC segment of power management and signal-chain semiconductors. Key features include ±10 V, ±5 V, and ±3.3 V software-selectable input ranges (one resistor selects the range), a 2.5 V internal reference with optional external reference override, ±1.5 LSB maximum INL and ±1 LSB maximum DNL at the 16-bit level, and a serial data output that can be driven by either the internal conversion clock or an external data clock for system-clock synchronization. Power consumption is 75 mW typical from a single +5 V analog supply plus a +3 V to +5 V digital supply, with a hardware power-down (NAP) pin reducing quiescent current during idle windows. The device uses CMOS capacitor-based charge-redistribution SAR logic with an inherent sample-and-hold on the input pins, eliminating the need for an external track-and-hold. The digital interface supports both internal-clock and external-clock data framing, and the SYNC/INPUTRANGE pin lets the host microcontroller reconfigure the analog input range on the fly without an external analog multiplexer. Typical applications include industrial process-control PLC analog input modules, multi-channel data-acquisition (DAQ) boards, high-temperature down-hole drilling instruments, automatic test equipment (ATE) digitizer channels, and precision weigh-scale and strain-gauge signal chains where bipolar swing and 16-bit resolution together drive system accuracy. The HDB high-temperature grade also suits military and aerospace platforms that require guaranteed AC and DC behavior at +175 °C. When designing with the ADS8509HDB, place the 10 µF input-bypass capacitor and the 10 µF reference-bypass capacitor within 2 mm of the AVCC and REF pins, route the analog input traces away from the digital serial-output lines, and choose an input-range resistor of 1 % tolerance or better to maintain gain accuracy. The optional NAP pin can be asserted between conversions to drop supply current to the microampere range for battery-powered data loggers. This page synthesizes distributor pricing, drop-in same-family SAR ADC alternatives, and practical design notes that go beyond the manufacturer datasheet's typical application section.
ADS8509IDW - 16-Bit 250-kSPS SAR ADC | Texas Instruments
The Texas Instruments ADS8509IDW is a 16-bit, single-channel successive-approximation register ADC with a 250-kSPS conversion rate, programmable differential input ranges of ±10 V, ±5 V, and ±3.3 V, and an SPI-compatible serial interface in a 20-pin SOIC package. An ADC is an analog-to-digital converter, a semiconductor that transforms a continuously varying analog voltage into a numeric code for processing, measurement, or control. The ADS8509 belongs to the SAR ADC family within the broader data-converter and signal-processing hierarchy. Its internal sample-and-hold circuit, capacitor-based conversion core, voltage reference, clock, and serial interface provide a complete conversion solution for bipolar industrial signals. The primary conversion characteristics are 16-bit resolution and a 250-kSPS throughput. The ADC supports three programmable input ranges, allowing the same device to measure signals spanning ±3.3 V, ±5 V, or ±10 V. Serial data can be clocked by the internal converter clock or synchronized to an external data clock, which provides flexibility in systems where the host controller controls the conversion timing. Internally, the ADS8509 uses a capacitor-based SAR architecture. Each conversion compares the sampled input against an internal DAC through a sequence of comparator decisions, progressively determining the 16-bit result. This approach provides predictable sampling behavior without the complexity of a pipeline architecture. The serial interface reduces the number of signal connections required for a high-resolution converter and is suitable for communicating with microcontrollers and digital signal processors. Typical applications include industrial process-control instrumentation, programmable logic controllers, data acquisition modules, factory automation equipment, and embedded measurement systems. The wide bipolar input ranges are particularly useful for sensors and transducers that operate around ground, such as pressure, temperature, current, and bridge-sensor front ends. The 20-pin SOIC footprint requires careful analog layout. Keep the analog input, reference, and ground connections short, place required bypass capacitors close to their associated pins, and route serial interface traces away from sensitive input nodes. Verify the reference, supply, and input network against the manufacturer datasheet before applying the full ±10 V range. This page combines the key ADS8509IDW specifications, verified same-footprint replacement information, application guidance, and side-by-side engineering comparisons. It is designed to help designers determine whether the converter’s resolution, sampling rate, input range, and serial architecture fit a specific acquisition or industrial-control design.
ADS8517IDWR - 16-Bit 200kSPS Bipolar ADC | Texas Instruments
The Texas Instruments ADS8517IDWR is a 16-bit, 200-kSPS, low-power sampling analog-to-digital converter with an internal reference and selectable parallel/serial interface, housed in a 28-pin SOIC (DW) wide-body package. It operates from a single +5 V supply and accepts true bipolar input signals of ±10 V, eliminating the need for external signal-conditioning level shifters in industrial data-acquisition front-ends. A successive-approximation-register (SAR) ADC is a precision converter that resolves one bit per clock cycle using a binary-search algorithm against an internal DAC, producing accurate, latency-free conversions ideal for multiplexed data-acquisition systems. As a member of the SAR ADC family within the broader category of analog-to-digital converters -> data acquisition ICs -> signal chain -> mixed-signal semiconductors, the ADS8517 combines a precision sampling front end with on-chip clock and reference for high integration. Key features include ±10 V or 0 V to +5 V true bipolar input range, internal 2.5 V reference with low drift, 88 dB SINAD, 200 kSPS throughput, and a flexible interface that supports both parallel (BYTE-selectable) and SPI-compatible serial outputs. The device consumes only 35 mW at 200 kSPS and drops to 5 mW in power-down, suiting battery-aware industrial designs. The 28-SOIC wide-body package provides excellent thermal performance and ease of hand-soldering for prototypes. Typical applications include industrial process control loops, multi-channel data-acquisition systems, portable or battery-powered test equipment, and precision instrumentation requiring direct bipolar signal digitization. The integrated reference simplifies BOM and layout, while the dual interface mode allows the same PCB to be used in serial-only compact modules or parallel high-speed backplanes. When designing with the ADS8517, pay attention to the input common-mode return path (the ±10 V range uses ±5 V supplies) and place a 10 µF decoupling capacitor close to the supply pin. The S/H front-end handles fast step inputs up to ±FS without charge-kick artifacts, but a small RC anti-alias filter ahead of the input is recommended.
ADS8519IDB - 16-Bit 250kSPS SAR ADC 28-SSOP | Texas Instruments (Tape & Reel)
The Texas Instruments ADS8519IDB is a complete 16-bit sampling analog-to-digital converter (ADC) in a 28-pin SSOP (DB) package, using a successive approximation register (SAR) architecture with integrated sample-and-hold, internal 4.096V reference, and internal clock. It operates from a 5V analog supply and a 1.65V to 5.25V I/O supply, supporting input ranges of 8.192V, plus/minus 5V, and plus/minus 10V at up to 250kSPS. An analog-to-digital converter (ADC) converts continuous analog signals into discrete digital values for digital processing. The SAR ADC family uses a binary search algorithm with a capacitor-based DAC, offering an excellent balance of resolution, speed, and power for data acquisition systems, sitting between slower delta-sigma converters and faster pipeline ADCs in the signal conversion hierarchy. Key features include 93dB SNR with a 20kHz input, plus/minus 1.5LSB maximum integral nonlinearity (INL), plus/minus 1LSB maximum differential nonlinearity (DNL) with 16 bits no missing codes, and a SPI-compatible serial output with daisy-chain (TAG) capability and 3-state bus. Typical power dissipation is only 110mW at 250kSPS, making it well suited to power-sensitive designs. Technically, the capacitor-based SAR core with sample-and-hold accurately captures fast-changing signals, while the internal clock and reference eliminate external precision components. The wide 1.65V to 5.25V I/O supply range allows direct interfacing with 1.8V or 3.3V microcontrollers and FPGAs without level shifters. The pinout is similar to the 16-bit ADS7809 and the 12-bit ADS7808 and ADS8508, easing family upgrades. Typical applications include industrial process control, multi-channel data acquisition systems, medical instrumentation, and test and measurement equipment, where the high SNR and low INL support precision measurements and the daisy-chain serial interface simplifies multi-ADC configurations. Design tip: decouple the analog supply with 0.1uF and 10uF capacitors placed close to the pins, bypass the reference input with 10uF, and use separate analog and digital ground planes to minimize noise coupling into the 16-bit conversion result.
ADS8519IDBR - 16-Bit 250kSPS SAR ADC 28-SSOP | Texas Instruments
The Texas Instruments ADS8519IDBR is a complete 16-bit sampling analog-to-digital converter (ADC) in a 28-pin SSOP (DB) package, using a successive approximation register (SAR) architecture with integrated sample-and-hold, internal 4.096V reference, and internal clock. It operates from a 5V analog supply and a 1.65V to 5.25V I/O supply, supporting input ranges of 8.192V, plus/minus 5V, and plus/minus 10V at up to 250kSPS. An analog-to-digital converter (ADC) converts continuous analog signals into discrete digital values for digital processing. The SAR ADC family uses a binary search algorithm with a capacitor-based DAC, offering an excellent balance of resolution, speed, and power for data acquisition systems, sitting between slower delta-sigma converters and faster pipeline ADCs in the signal conversion hierarchy. Key features include 93dB SNR with a 20kHz input, plus/minus 1.5LSB maximum integral nonlinearity (INL), plus/minus 1LSB maximum differential nonlinearity (DNL) with 16 bits no missing codes, and a SPI-compatible serial output with daisy-chain (TAG) capability and 3-state bus. Typical power dissipation is only 110mW at 250kSPS, making it well suited to power-sensitive designs. Technically, the capacitor-based SAR core with sample-and-hold accurately captures fast-changing signals, while the internal clock and reference eliminate external precision components. The wide 1.65V to 5.25V I/O supply range allows direct interfacing with 1.8V or 3.3V microcontrollers and FPGAs without level shifters. The pinout is similar to the 16-bit ADS7809 and the 12-bit ADS7808 and ADS8508, easing family upgrades. Typical applications include industrial process control, multi-channel data acquisition systems, medical instrumentation, and test and measurement equipment, where the high SNR and low INL support precision measurements and the daisy-chain serial interface simplifies multi-ADC configurations. Design tip: decouple the analog supply with 0.1uF and 10uF capacitors placed close to the pins, bypass the reference input with 10uF, and use separate analog and digital ground planes to minimize noise coupling into the 16-bit conversion result.
ADS8519IDBR-Q1 - 16-Bit 250kSPS SAR ADC | Texas Instruments
The Texas Instruments ADS8519IDBR-Q1 is a complete 16-bit sampling analog-to-digital converter (ADC) in a 28-pin SSOP (DB) package. Built on state-of-the-art CMOS structures, it integrates a capacitor-based successive approximation register (SAR) ADC with sample-and-hold, 4.096V internal reference, clock, and SPI-compatible serial data interface, delivering 250kSPS throughput. An ADC (analog-to-digital converter) is a data converter that transforms continuous analog signals into discrete digital values. Within the converter hierarchy, the SAR (successive approximation register) architecture offers an optimal balance of resolution, speed, and low power for medium-rate acquisition systems, sitting between slower delta-sigma converters and faster pipeline ADCs. Key features include 0V to 8.192V, plus/minus 5V, and plus/minus 10V input ranges; 93dB SNR with a 20kHz input; plus/minus 1.5LSB maximum INL and plus/minus 1LSB maximum DNL with 16 bits no missing codes; an SPI-compatible serial output with daisy-chain (TAG) feature and 3-state bus; and a 5V analog supply with a wide 1.65V to 5.25V I/O supply. Data can be clocked out using the internal clock or synchronized to an external data clock. The pinout is similar to the 16-bit ADS7809 (low-speed) and the 12-bit ADS7808 and ADS8508, simplifying migration across resolution tiers. The device is fully specified over the industrial -40C to +85C temperature range. Typical applications include automotive and industrial data acquisition, multi-channel instrumentation with daisy-chained converters, motor-control feedback, and test equipment front ends. Design tip: decouple the internal reference with a low-ESR capacitor and drive the input through a low-impedance buffer (e.g., THS-series op amp) to preserve the 93dB SNR; ensure the digital host can honor the conversion timing at 250kSPS.
ADS8555SPM - 16-Bit 6-Channel 630-kSPS Simultaneous ADC | Texas Instruments
The Texas Instruments ADS8555SPM is a 16-bit, six-channel, simultaneous-sampling successive-approximation-register analog-to-digital converter that supports up to 630 kSPS per channel in parallel-interface mode and 450 kSPS in serial-interface mode. The device is packaged in a 64-pin LQFP measuring 10 mm by 10 mm and accepts true-bipolar analog inputs, making it suitable for synchronized industrial measurement and control systems. An ADC converts continuously varying analog voltages into numeric values for processing by a microcontroller, DSP, FPGA, or industrial controller. The ADS8555 belongs to the SAR ADC family, whose charge-redistribution architecture combines inherent sample-and-hold operation with deterministic conversion behavior. Its six converter channels are organized into three channel pairs, allowing related signals to be captured at the same time for accurate phase, ratio, bridge, or feedback measurements. Key features include 16-bit nominal resolution, six simultaneous-sampling channels, true-bipolar inputs, and programmable data rates as high as 630 kSPS in parallel mode. Each channel includes a sample-and-hold circuit, while the parallel interface supports efficient transfer of 16-bit conversion results. The serial interface offers a lower pin count requirement but reduces the maximum conversion rate to 450 kSPS. The 64-pin LQFP also provides separate analog and digital supply and ground connections that can help preserve conversion performance in mixed-signal layouts. The SAR architecture uses charge redistribution to perform conversion through successive comparison steps. Simultaneous sampling is important when timing relationships between inputs matter because each pair is sampled at the same instant rather than sequentially. This makes the converter appropriate for motor-control feedback, power-inverter monitoring, three-phase current sensing, industrial transducer acquisition, and synchronized test systems where channel-to-channel timing error would otherwise distort the result. Typical applications include three-phase motor drives, power-converter control, industrial process monitoring, vibration and condition-monitoring systems, synchronized instrumentation, and multichannel sensor acquisition. Parallel mode is preferable when throughput is the priority, while serial mode can simplify board routing or interface with a controller that does not require a wide parallel bus. The six-channel architecture also reduces the number of converters needed when timing coherence across several voltages is essential. PCB implementation should place decoupling capacitors close to the analog and digital supply pins, route digital interface traces away from analog inputs, and use a quiet ground strategy around the converter. Input bandwidth and acquisition-time requirements should be checked against the selected sampling rate. The ADS8555SPM is not an automotive-qualified variant, so additional qualification review is needed for safety-critical automotive deployment. This product page combines manufacturer specifications, package and interface details, replacement guidance, application-focused engineering analysis, and design considerations for evaluating the ADS8555 in multichannel simultaneous-sampling systems.
ADS8557IPM - 14-Bit 6-Channel Simultaneous ADC | Texas Instruments
The Texas Instruments ADS8557IPM is a 14-bit, 6-channel simultaneous-sampling successive approximation register ADC operating at 670 kSPS in a 64-pin LQFP (PM) package. The device accepts true-bipolar analog inputs and supports parallel or serial data transfer for flexible connection to processors, FPGAs, and data-acquisition systems. An analog-to-digital converter converts continuous analog voltage into a numeric representation for measurement, control, or signal processing. A simultaneous-sampling ADC includes a dedicated sample-and-hold circuit on each channel, allowing all six inputs to be captured at the same instant. This architecture is valuable when phase relationships between multiple sensor, voltage, or current signals must be preserved. Within the broader hierarchy, the ADS8557IPM is a data-converter IC, an ADC, and a SAR-based precision acquisition component. Key features include 14-bit resolution, six simultaneously sampled channels, a 670 kSPS conversion rate, and true-bipolar input support. Its parallel interface can operate at rates up to 730 kSPS across the ADS855x family, while serial operation supports rates up to 500 kSPS. The -40°C to +125°C operating range supports industrial and extended-temperature equipment, and the 10 mm by 10 mm LQFP package provides 64 pins for analog, digital, reference, power, and interface connections. The SAR conversion architecture repeatedly performs successive approximation and binary weighting during each conversion. Its six-channel structure prevents timing skew between channels by sampling the analog inputs simultaneously rather than multiplexing one converter across multiple inputs. The parallel interface can reduce external interface complexity in high-throughput embedded systems, while the serial interface can reduce the number of data lines required when board space or routing density is more important than maximum transfer rate. Typical applications include synchronized industrial process monitoring, multichannel instrumentation, power-system analysis, factory automation, vibration and condition monitoring, and laboratory data acquisition. The six true-bipolar channels are especially useful when several transducer outputs must be measured against a common reference at a single instant, allowing engineers to compare channel amplitudes without introducing sequential-sampling skew. PCB design should place input, reference, and decoupling components close to their associated pins while preserving short, controlled digital return paths. Use the manufacturer pin-description table when assigning the 64 package connections, and follow the recommended power-supply and reference-layout guidance for analog and digital sections. Adequate filtering and grounding are important because acquisition accuracy depends on clean references, low-noise supplies, and minimized coupling between sensitive analog inputs and the parallel output bus. This page combines manufacturer specifications, interface-rate context, packaging information, drop-in family alternatives, and practical design guidance. It is intended to help engineers evaluate the ADS8557IPM for simultaneous multi-channel acquisition while accounting for resolution, throughput, thermal range, interface selection, and PCB implementation constraints.
ADS8558IPM - 12-Bit 6-Channel 730 kSPS Simultaneous ADC | TI
The Texas Instruments ADS8558IPM is a 12-bit, six-channel simultaneous-sampling successive approximation register ADC with true bipolar inputs, up to 730 kSPS in parallel interface mode, and a 64-pin LQFP (PM) package measuring 10 mm by 10 mm. It includes one sample-and-hold circuit per channel and supports up to 500 kSPS in serial interface mode. An ADC is a data-converter integrated circuit that transforms continuous analog voltages into numerical values for processing by a microcontroller, DSP, FPGA, or industrial controller. The ADS8558 belongs to the SAR ADC family, where successive approximation selects the digital result one bit at a time. It sits within the broader hierarchy of analog-to-digital converters, data-converter ICs, and semiconductor components used to acquire real-world signals. The ADS8558IPM is organized as six SAR conversion channels grouped into three pairs. True bipolar input capability allows each channel to measure voltages that extend below ground, while the sample-and-hold architecture supports simultaneous high-speed acquisition of multiple signals. The 12-bit resolution provides 4096 possible digital codes, while the selectable parallel or serial interface supports different processor architectures and communication priorities. At the maximum parallel-interface data rate, each of the six channels can convert at 730 kSPS. Serial operation supports data rates up to 500 kSPS and can reduce the number of interface signals required on a constrained printed circuit board. The device also supports an internal conversion clock and reference, according to the manufacturer product information, although exact timing, input range, reference voltage, and electrical limit details should be confirmed in the complete manufacturer datasheet before a new design is released. Typical signal-acquisition uses include industrial process monitoring, motor and drive control, power-system instrumentation, data acquisition systems, and test equipment requiring several channels to be sampled at the same instant. Simultaneous sampling is particularly useful when comparing phase-related voltages, because the separate sample-and-hold circuits reduce timing differences between channels. PCB implementation should prioritize short, symmetric analog input routes and a quiet reference and supply arrangement. Place input filtering and protection components close to their associated pins, keep digital interface routing away from sensitive analog nodes, and use a solid ground plane with uninterrupted return paths. The LQFP package also requires careful thermal assessment when operated near its maximum specified ambient temperature. This product page organizes the key ADC characteristics, package information, application guidance, comparison data, and practical design considerations in one place. Engineers should use the manufacturer pin-description table and recommended application circuit when assigning tracks, selecting external components, and validating acquisition timing.
ADS8568SPM - 16-Bit 8-Ch Simultaneous-Sampling SAR ADC | TI
The Texas Instruments ADS8568SPM is a 16-bit, 8-channel, simultaneous-sampling, bipolar-input, successive-approximation-register (SAR) analog-to-digital converter (ADC) housed in a 64-pin LQFP (PM) package measuring 10x10 mm. The device integrates eight individual SAR ADCs with true bipolar input ranges of ±10 V or ±5 V, achieves up to 540 kSPS per channel in parallel interface mode, and consumes only 335 mW total at full throughput. A SAR ADC (Successive Approximation Register analog-to-digital converter) is a precision data-conversion architecture that uses a binary-search algorithm against an internal DAC to produce a digital code in N conversion cycles for N bits of resolution. SAR ADCs are prized for deterministic latency, excellent DC accuracy, and low power consumption, sitting in the hierarchy alongside pipeline, sigma-delta, and flash converters as one of the four principal ADC architectures. Simultaneous-sampling variants like the ADS8568 capture all eight channels on the same internal clock edge, eliminating inter-channel skew that would otherwise corrupt polyphase measurements in power-line monitoring, motor control, and multi-axis data acquisition. Key features include on-chip analog input clamp protection, a second-order anti-aliasing filter per channel, integrated track-and-hold amplifiers, flexible serial or parallel digital interfaces, and an auto-sleep mode that drops quiescent current between conversions. The bipolar input architecture eliminates external signal-conditioning circuitry for industrial ±10 V or ±5 V signals, simplifying board design and improving noise immunity in harsh environments. The integrated reference and reference-buffer reduce external component count, while a hardware reset pin and software reset word simplify multi-device synchronization. The ADS8568 forms part of a pin-compatible family alongside the 12-bit ADS8528 and 14-bit ADS8548, allowing designers to migrate resolution without reworking the PCB. The dual supply rails (AVDD 5 V, DVDD 2.7 V-3.6 V) are typical for high-voltage industrial signal chains and pair naturally with a low-noise LDO such as the TPS7A4701 on the analog rail. Typical applications include three-phase power-line monitoring, multi-axis motor control, industrial process control, simultaneous-sampled multi-channel data-acquisition systems, and protection relays. Choose the ADS8568SPM when true bipolar inputs and deterministic channel-to-channel phase alignment are mandatory for your measurement algorithm.
ADS8568SPMR - 16-Bit 8-Ch Simultaneous-Sampling SAR ADC | TI
The Texas Instruments ADS8568SPMR is a 16-bit, 8-channel, simultaneous-sampling, bipolar-input, successive approximation register (SAR) analog-to-digital converter (ADC) housed in a 64-pin LQFP (PMR) package with 10x10 mm body size. It delivers up to 510 kSPS per channel in parallel (PAR) interface mode or 400 kSPS per channel in serial (SER) interface mode, with a signal-to-noise ratio of 91.5 dB and total harmonic distortion of -94 dB typical. An ADC (analog-to-digital converter) is a mixed-signal integrated circuit that converts continuous analog voltages into discrete digital codes, serving as the bridge between the analog physical world and the digital processing domain. SAR ADCs use a binary search algorithm implemented with a capacitive DAC and comparator to achieve a deterministic conversion time of one clock cycle per code bit, offering an attractive balance of speed, resolution, and power consumption compared to delta-sigma or pipeline architectures. Simultaneous-sampling ADCs like the ADS8568SPMR integrate eight independent sample-and-hold amplifiers that capture all eight input channels at exactly the same instant, which is essential for phase-coherent multi-phase measurements in power, motor control, and instrumentation systems. Key features of the ADS8568SPMR include software-configurable input ranges of +/-10 V or +/-5 V (true bipolar), on-chip sequencer, low power consumption, and pin- and software-compatibility with the 12-bit ADS8528 and 14-bit ADS8548 family members, allowing engineers to migrate designs across resolution grades without PCB changes. The integrated analog input clamp protection and second-order anti-aliasing filter simplify front-end design. Typical applications include three-phase power-line monitoring and protection relays, multi-axis motor control, simultaneous data acquisition (DAQ) systems, instrumentation and medical imaging, and industrial process control. The 64-LQFP (PMR) package supports standard surface-mount reflow assembly and provides sufficient thermal mass for industrial temperature operation. When designing with the ADS8568SPMR, pay attention to analog input common-mode and bypass capacitor placement, and verify that the throughput rate is supported in either parallel or serial mode per your MCU/FPGA interface constraints. The bipolar input range eliminates the need for external signal conditioning in most +/-10 V industrial applications.
ADS8586SIPM - 16-Bit 200kSPS 6-Ch Simultaneous-Sampling ADC | TI
The Texas Instruments ADS8586SIPM is a 16-bit, 200-kSPS, 6-channel, simultaneous-sampling successive-approximation-register (SAR) analog-to-digital converter (ADC) with true bipolar input ranges on a single 5V supply, housed in a 64-pin LQFP (PM, 10x10 mm) package. It integrates a complete analog front-end per channel — a programmable-gain amplifier (PGA) with 1 MΩ input impedance, input clamp protection, and a low-drift reference — together with on-chip digital signal averaging and a high-speed serial (SPI-compatible) or parallel back-end interface. A SAR ADC is a successive-approximation-register analog-to-digital converter that uses a binary search across an internal capacitive DAC to resolve each conversion in N bit-cycles, yielding low latency, deterministic throughput, and no pipeline delay — ideal for multiplexed control loops and multi-axis motion systems. The ADS8586S sits within the broader data-converter / data-acquisition IC hierarchy: ADC → simultaneous-sampling ADC → integrated DAQ system → signal-chain IC → semiconductor. By integrating the front end, reference, and six sample-and-hold amplifiers, the part eliminates external signal conditioning and preserves channel-to-channel phase alignment to within a single clock cycle. Key specifications from this site are: 16-bit resolution, 200-kSPS per-channel sampling, 6 fully-differential/single-ended bipolar input channels, integrated PGA with software-selectable input ranges (typically ±10V and ±5V at 5V supply), 1 MΩ minimum input impedance, integrated low-drift voltage reference, SPI/parallel/byte interface options, and an operating junction range of −40°C to +125°C. The wide bipolar range and high input impedance let the device sit directly behind ±10V or ±5V transducer signals without external scaling or buffering. Typical applications include three-phase power-line monitoring and protection relays, multi-axis motor-control feedback (servo drives, robotics, CNC), industrial process control and PLC analog input modules, power-quality analyzers and energy meters, programmable-logic-controller (PLC) analog front-ends, and medical multi-channel patient-monitoring instrumentation. The simultaneous sampling makes it well-suited to any system where phase relationships between signals matter — power measurement, vibration analysis, and motor control being the canonical use cases.
ADS8675IPW - 14-Bit 500-kSPS SAR ADC | Texas Instruments
The Texas Instruments ADS8675IPW is a 14-bit, 500-kSPS, single-channel successive-approximation analog-to-digital converter with an integrated analog front end, housed in a 16-pin TSSOP package. It supports bipolar input ranges of ±12.288 V, ±10.24 V, ±6.144 V, ±5.12 V, and ±2.56 V, plus unipolar ranges from 0 V to 12.288 V, 10.24 V, 6.144 V, and 5.12 V. The analog supply operates from 5 V, while the digital interface accepts 1.65 V to 5 V. An ADC is a data-conversion IC that transforms an analog voltage into a digital number for measurement, control, monitoring, or communications. The ADS8675IPW belongs to the successive-approximation ADC hierarchy, also called a SAR ADC, within the broader analog-to-digital converter and data-converter semiconductor categories. Successive-approximation converters compare the sampled input with an internal reference through a sequence of bit decisions, combining deterministic conversion behavior with low converter power. Key features include a 14-bit conversion resolution, a 500-kSPS sampling rate, software-programmable bipolar and unipolar ranges, and constant resistive input impedance of at least 1 MΩ. The integrated analog front end reduces the need for external conditioning, while the on-chip 4.096 V reference provides a stable conversion basis. Input overvoltage protection extends to ±20 V, adding robustness in industrial systems where transient voltage excursions can occur. The device uses a 5 V analog supply and a separate 1.65 V to 5 V I/O supply, allowing its serial interface to operate at a lower logic level when necessary. Its constant input impedance simplifies front-end scaling and sample-and-hold design compared with converters whose input impedance changes with conversion timing. The supported high-voltage ranges make the converter practical for systems handling bipolar sensor signals, industrial process voltages, and level measurements without immediately requiring a separate high-voltage protection network. Typical applications include industrial process-control instrumentation, factory automation, data-acquisition systems, power-grid monitoring, laboratory measurement equipment, and embedded control platforms. A 500-kSPS rate supports rapidly changing analog events, while 14-bit resolution provides 16,384 discrete code levels for a selected range. The ADC can also form the measurement front end of a programmable power supply or battery-management system where accurate voltage monitoring is required. Designers should account for analog-supply noise, reference integrity, digital-interface timing, and grounding when deploying the ADS8675IPW. The serial output and digital I/O supply must be compatible with the host controller, while input filtering and scaling must keep the analog signal within the programmed range. Proper decoupling and a quiet analog layout are especially important when the converter is placed beside switching regulators, clocks, or high-current digital circuitry.
ADS8681IPW - 16-Bit 1-MSPS SAR ADC | Texas Instruments
The Texas Instruments ADS8681IPW is a 16-bit, single-channel successive-approximation analog-to-digital converter with a maximum sampling rate of 1 MSPS, programmable bipolar input ranges of ±12 V, ±10 V, ±6 V, ±5 V, and ±2.5 V, and a 16-pin TSSOP package. It operates from a 5 V supply and integrates a 4.096 V reference with low temperature drift. An analog-to-digital converter is a data-acquisition IC that converts an analog voltage into a numeric code for processing by a microcontroller, FPGA, or industrial controller. The ADS8681 belongs to the SAR ADC hierarchy, where a successive-approximation internal DAC determines the input voltage during each conversion. It also belongs to the broader ADC, data-converter, and semiconductor categories, making it suitable for precision measurement systems that must accept high-voltage industrial signals. Key features include 16-bit resolution, a 1 MSPS conversion rate, one analog input channel, and programmable input ranges extending to ±12 V. The integrated analog front end accepts bipolar industrial signals, while the overvoltage-protection circuit extends tolerance to ±20 V. An on-chip 4.096 V reference provides the conversion baseline and is specified as having extremely low temperature drift. The device also uses an integrated reference and input-driver structure to simplify acquisition-circuit design. The 5 V single-supply architecture supports compact mixed-signal designs where the analog input can exceed the supply rails. The SAR conversion principle provides predictable sampling behavior, while the programmable input ranges allow one board design to cover several conventional voltage classes. Its 16-TSSOP package has a 0.173 inch, 4.40 mm body width, and the IPW ordering option is supplied in a tube according to the product listing. Typical applications include industrial process-control instrumentation, factory data acquisition, PLC analog-input modules, power-system monitoring, laboratory measurement equipment, and embedded data-logging systems. The ±12 V input capability is particularly useful when the source is a transducer or sensor-conditioning circuit rather than a ground-referenced 0-to-5 V signal. The main design consideration is analog conditioning. Place input filtering close to the ADC pins, use the manufacturer’s recommended reference and supply bypassing, and account for the input-filter bandwidth limitation identified in TI’s support material. Check settling behavior and acquisition timing before sampling signals whose frequency approaches the converter’s 1 MSPS capability. This page combines the manufacturer’s device information with package details, practical implementation guidance, application guidance, and a parameter-by-parameter comparison with pin-compatible ADS868x options. It is intended to help engineers assess package reuse, input-range compatibility, acquisition timing, and production sourcing before selecting the ADS8681IPW.
ADS8688IDBT - 16-Bit 500kSPS 8-Ch SAR ADC | Texas Instruments
The Texas Instruments ADS8688IDBT is a 16-bit, 500kSPS, 8-channel, single-supply successive-approximation-register (SAR) analog-to-digital converter with integrated analog front-end (AFE) circuitry and bipolar input ranges, housed in a 38-pin TSSOP (DBT) package. The device operates from a single 5V analog supply with a digital I/O supply from 1.65V to 5.25V, supports input ranges up to ±12V with ±20V overvoltage protection per channel, and integrates an 8-channel multiplexer with automatic and manual scan modes plus a low-drift on-chip 4.096V reference. A SAR ADC is a successive-approximation-register analog-to-digital converter that performs a binary search across an internal capacitive DAC to digitize each input sample in one conversion cycle. SAR ADCs offer deterministic latency, no pipeline delay, and excellent DC accuracy, making them the converter of choice for multiplexed data-acquisition front ends, industrial control loops, and precision instrumentation. The ADS8688IDBT sits in the data-acquisition IC taxonomy as: ADC -> SAR ADC -> multi-channel data-acquisition system -> precision analog IC. Key features include 500 kSPS throughput, 16-bit resolution with no missing codes, ±20V overvoltage-tolerant analog inputs, integrated 8-channel AFE, low-drift 4.096V internal reference with REF-by-default pin mode, and an SPI-compatible serial interface that supports daisy-chaining of multiple devices. The device also includes per-channel programmable input ranges (±12V, ±10V, 0-10V, 0-5V, ±5V) via software configuration and an ALARM/SDO-ABS pin for threshold detection. The architecture combines a charge-redistribution SAR core with a high-impedance input clamp, input signal conditioning, and an 8:1 input mux. The integrated reference reduces external component count, while the 1.65V-5.25V digital supply enables direct connection to 1.8V, 3.3V, and 5V host controllers without level shifters. Per the TI product page, the device is designed for high-channel-count precision measurement where board area and BOM cost are critical. Typical applications include industrial process control PLC analog input modules, power automation and protection relays, multi-axis motor drive feedback, battery management system (BMS) cell monitoring, medical instrumentation signal acquisition, and factory-automation sensor aggregation. The bipolar input ranges make it directly compatible with ±10V industrial sensors without external signal conditioning. When designing with this device, observe proper analog/digital ground partitioning on the PCB and place the 10uF + 1uF AVDD decoupling network within 5mm of the AVDD pin. For optimum performance, use the device's internal reference with the REF-by-default configuration and avoid driving high-impedance sources directly into the analog inputs without a series resistor to limit input current during fault conditions. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the TI product page or distributor listings.
ADS8688IDBTR - 16-Bit 500kSPS 8-Ch SAR ADC | Texas Instruments
The Texas Instruments ADS8688IDBTR is a 16-bit, 500-kSPS, 8-channel, single-supply SAR analog-to-digital converter with bipolar input ranges and an integrated analog front-end, housed in a 38-pin TSSOP (DBT) package. The converter integrates an 8-channel input multiplexer with auto and manual scan, per-channel programmable input ranges (±10.24 V, ±5.12 V, ±2.56 V bipolar; 10.24 V, 5.12 V unipolar), and operates from a 5-V analog supply. The ADC delivers 500 kSPS throughput across the full input range with no latency between channels. A SAR (Successive-Approximation Register) ADC is a sampling architecture that converts an analog input to a digital code using a binary-search algorithm against an internal precision DAC. Compared with delta-sigma or pipeline ADCs, SAR converters offer deterministic latency, low power, and excellent multi-channel throughput, making them ideal for multiplexed data-acquisition systems in industrial control, instrumentation, and motor-drive applications where the control loop must react within a known time after each conversion. Key features include ±1-LSB (max) linearity, a low-noise 4-ppm/°C internal reference, an SPI-compatible daisy-chainable serial interface, and a 1.65-V to 5.25-V digital supply that allows direct connection to most host MCUs and FPGAs without level translators. An on-chip input protection clamp handles ±20-V over-voltage on every analog input channel. The architecture pairs a charge-redistribution SAR core with a high-bandwidth input driver, allowing true ±10-V bipolar measurements from a single 5-V rail - a key advantage in legacy industrial systems where the signal swings can exceed the supply. Per-channel range scaling lets the designer optimize dynamic range for each transducer type, and a hardware reset pin and daisy-chain logic simplify synchronization when stacking multiple ADS8688/ADS8684 devices on the same SPI bus. Typical applications include PLC analog input modules, multi-axis motor-drive feedback, industrial process-control transmitters, power-metering front-ends, and multi-channel data-acquisition cards for test and measurement equipment. The 8-channel integration cuts board area versus discrete ADCs and reduces BOM cost. When designing with this device, place the 10-µF AVDH bypass capacitor within 5 mm of the AVDH pin and route AVDD separately from DVDD to avoid digital noise coupling into the analog front-end. For best THD in audio-bandwidth front ends, average the per-channel offset calibration coefficients programmed into each channel's OFFSET register at power-up. This page synthesizes distributor pricing, drop-in same-package alternatives, and layout guidance that complements the manufacturer datasheet to accelerate multi-channel data-acquisition design.
ADS8887 - 18-Bit 100kSPS True-Differential SAR ADC | TI
The Texas Instruments ADS8887 is an 18-bit, 100-kSPS, true-differential input, successive approximation register (SAR) analog-to-digital converter. It operates with a 2.5-V to 5-V external reference, offering a wide selection of signal ranges without additional input signal scaling. The reference voltage setting is independent of, and can exceed, the analog supply voltage (AVDD). Available in a miniature 10-pin VSSOP (DGS) package, the ADS8887 targets space-constrained designs requiring high precision and low power. A SAR ADC is a type of analog-to-digital converter that uses a binary search algorithm to convert an analog input into a digital output, consisting of a comparator, a capacitive DAC, and successive approximation logic. SAR ADCs, a subset of data converters in mixed-signal electronics, are known for high speed, low power, and excellent accuracy in data acquisition, industrial process control, and medical instrumentation. Key features include 18-bit resolution, a 100 kSPS maximum sampling rate, and a true-differential input that rejects common-mode noise. The device runs from a single 2.7-V to 3.6-V analog supply with a separate digital supply for the serial interface. An external reference between 2.5 V and 5 V lets designers optimize the input range per application. A power-down mode reduces current to microamperes, suiting battery-powered systems. Technically, the ADS8887 uses a charge-redistribution SAR architecture with a capacitive DAC, achieving INL of ±1 LSB and SNR of 100 dB. An internal oscillator and track-and-hold circuit reduce external component count. The SPI-compatible serial interface supports 3-wire and 4-wire modes and daisy-chaining for multi-channel systems; the 10 MHz input bandwidth accurately samples high-frequency signals. Typical applications include precision data acquisition, industrial automation, medical imaging, and portable instrumentation. The true-differential input makes it ideal for bridge sensors, thermocouples, and other differential signal sources, plus battery-powered data loggers and IoT devices. Design tip: provide a low-impedance reference source, bypass the reference with a 10-uF capacitor, and drive the analog input from a low-impedance source such as an op amp to achieve full datasheet performance.
ADS8900B - 20-Bit 1-MSPS SAR ADC with Ref Buffer | TI
The Texas Instruments ADS8900B is a 20-bit, 1-MSPS, single-channel successive-approxistration-register (SAR) analog-to-digital converter (ADC) featuring an integrated reference buffer and an integrated low-dropout regulator (LDO). It belongs to the pin-to-pin compatible ADS890xB family alongside the ADS8902B and ADS8904B, with 18-bit (ADS891xB) and 16-bit (ADS892xB) resolution variants available in the same VQFN-20 (RGE) footprint. A SAR ADC converts an analog input to a digital output using a binary search algorithm with a capacitive DAC and precision comparator. SAR converters occupy a key position in the data acquisition signal chain, balancing speed, resolution, and power for microcontroller and DSP-based systems. Key features include 1-MSPS sampling at 20-bit resolution, ±1 ppm integral nonlinearity (INL), and 104.5 dB SNR under typical conditions. The device supports unipolar, fully differential, and pseudo-differential analog inputs. The integrated reference buffer eliminates the need for a high-bandwidth external reference buffer, and the integrated LDO enables simplified power tree design. The SPI-compatible serial interface supports daisy-chain and multi-device configurations. The ADS8900B uses a high-speed capacitive-DAC SAR architecture achieving excellent linearity and low noise. Typical power consumption is approximately 15 mW at 1 MSPS from a 3.3V analog supply and 1.8V digital supply, suiting space-constrained precision designs. Typical applications include industrial automation and process control, power quality monitoring, medical instrumentation, and automated test equipment, where the ±1 ppm INL and 104.5 dB SNR directly improve measurement accuracy. Design consideration: decouple analog and digital supplies thoroughly and evaluate the integrated LDO-generated reference versus a low-noise external reference such as the REF5030A for the highest-accuracy systems.
ADS901E/1K - 10-Bit 20MSPS +3V ADC | Texas Instruments
The Texas Instruments ADS901E/1K is a 10-bit, 20 MSPS pipelined analog-to-digital converter operating from a single +3V supply, supplied on a 1000-piece Tape and Reel in a 28-pin SSOP (DB) package. The converter integrates a wideband 350 MHz track-and-hold front end, a 10-bit quantizer, and on-chip reference buffering, with an externally adjustable full-scale input range that allows direct interfacing to single-ended or differential sources. Typical power consumption is only 48 mW at +3V in active mode, dropping to 15 mW in power-down, making it well suited to portable and battery-powered equipment. What is a pipelined ADC: A pipelined analog-to-digital converter is a high-speed Nyquist-rate ADC architecture that processes the input sample in multiple cascaded low-resolution stages, each stage driving the next while a sample-and-hold captures the next input. This architecture trades a small fixed conversion latency (typically 3 to 5 clock cycles) for very high sampling rates at moderate resolution, sitting in the hierarchy between flash ADCs (fastest but power-hungry) and successive-approximation ADCs (low power but slow). Pipelined ADCs are the workhorse architecture for video, communications, and imaging digitizers, where 10-14 bits of resolution at 10-200 MSPS is required. The ADS901E/1K delivers no missing codes at 10-bit resolution and supports a single +2.7V to +3.7V supply rail. The wideband 350 MHz track-and-hold preserves high-frequency input harmonics on the way to the quantizer, allowing IF-sampling and accurate digitization of fast transients. Its externally adjustable full-scale range, set by the REF and REFCAP pins, lets the system designer trade dynamic range against noise floor without changing the analog front end. The device is offered in a low-power SSOP-28 (DB) surface-mount package rated for the -40C to +85C industrial temperature range. Typical applications include digital still cameras, camcorders, video capture cards, set-top boxes, portable test instruments, and battery-powered imaging equipment. The combination of 20 MSPS sampling, low 48 mW power, and 3V single-supply operation makes the ADS901E/1K especially attractive for handheld designs where heat dissipation and battery life dominate the BOM. Designers should pair the converter with a low-jitter clock source and a properly buffered analog input network; the document number cited in TI's product folder for this device is the SBAS026 family datasheet.