بەرهەمەکان (3,600+)

ADS901E/1KG4 - 10-Bit 20MSPS 3V Pipelined ADC | Texas Instruments
ADS901E/1KG4

ADS901E/1KG4 - 10-Bit 20MSPS 3V Pipelined ADC | Texas Instruments

The Texas Instruments ADS901E/1KG4 is a 10-bit, 20-MSPS pipelined analog-to-digital converter operating from a single +3V supply, housed in a 28-pin SSOP package with 5.30 mm body width. The device integrates a wide-bandwidth track-and-hold amplifier, a 10-bit quantizer, and an internal reference structure, drawing 60 mW typical power at full 20 MSPS. Its pipelined architecture delivers one sample per clock with low pipeline latency while supporting a single-ended or differential analog input selectable per application. A pipelined ADC is a high-speed converter architecture that uses multiple low-resolution flash stages connected in series, with each stage resolving a portion of the input on successive clock cycles. The pipelined topology (ADC -> pipelined ADC -> high-speed data converter -> data acquisition IC -> signal chain IC) is the dominant choice for sample rates from 5 MSPS to several hundred MSPS because it balances resolution, speed, and power efficiency. The ADS901 belongs to TI's SpeedPlus family, optimized for low-voltage, low-power applications such as portable imaging, digital communication basebands, and consumer video. Key features include 10-bit resolution, 20 MSPS maximum sample rate, 3V single-supply operation, an industrial -40C to +85C temperature range, and a pipelined converter type. The parallel CMOS-compatible output interface simplifies connection to ASICs, FPGAs, and DSPs. The wide-bandwidth track/hold front end preserves signal integrity well beyond the Nyquist frequency, and the full-scale input range is set by external reference resistors to optimize dynamic range for a given signal source. Typical applications include digital still cameras, digital video camcorders, set-top box video digitizers, communications baseband processing, and portable test equipment. The 3V supply and 60 mW power make it particularly attractive for battery-powered or thermally constrained designs where high-speed conversion is required without the bulk of a 5V analog front end. When designing with the ADS901, ensure the analog input is AC-coupled or level-shifted to remain within the input common-mode range, and place the external reference decoupling capacitors as close to the REF pin as possible. Use a continuous ground plane under the device to minimize digital feedthrough into the analog section, and follow TI's recommended layout in the datasheet for optimal SFDR performance. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found on a typical distributor listing.

RFQ پەیوەندی
ADSP-1012AJP - 12x12 CMOS Multiplier | Analog Devices
ADSP-1012AJP

ADSP-1012AJP - 12x12 CMOS Multiplier | Analog Devices

Analog Devices ADSP-1012AJP is a 12 x 12 CMOS analog multiplier integrated circuit in a 68-LCC J-lead package. The device combines two analog signal inputs with a scaling function to produce a multiplied output, making it suitable for precision analog signal-processing, modulation, control, and measurement systems. Verified distributor information identifies the part as a CMOS multiplier and lists it in a 68-LCC J-lead package. An analog multiplier is a signal-processing IC that performs mathematical multiplication of two voltage signals. Within the broader semiconductor hierarchy, it is a linear analog circuit, a functional analog multiplier, and a member of the wider signal-processing IC category. Unlike a digital multiplier implemented inside a microprocessor or DSP, this CMOS device operates directly in the analog domain and can participate in modulation, feedback, gain-control, and measurement circuits without requiring digital conversion at every stage. The key verified identifiers are the 12 x 12 multiplier resolution and the 68-LCC J-lead package. The suffix AJP identifies the particular Analog Devices ordering variant, while the package arrangement is available through distributors that provide pinout diagrams and manufacturer documentation. LCSC identifies the ADSP-1012AJP as in stock with a starting price of $6.4755, whereas Rochester Electronics lists original packaged units beginning at $261.05, reflecting the wide market spread associated with legacy analog components. The ADSP-1012AJP belongs to the CMOS multiplier product class. Its technical characteristics should be evaluated from the ADI manufacturer datasheet before signal-chain design, particularly input and output voltage ranges, bandwidth, accuracy, supply requirements, scaling behavior, reference inputs, and recommended operating conditions. Those parameters were not included in the supplied verified excerpts and therefore are not inferred here. Typical design roles include analog modulation and demodulation, programmable gain stages, closed-loop control products, instrumentation, and laboratory signal processing. The 68-LCC J-lead package makes the device particularly relevant to older leaded industrial, instrumentation, and aerospace-style assemblies where a modern fine-pitch surface-mount package would not fit the existing board pattern. Engineers should verify the complete manufacturer pinout and application circuit before PCB release. Because the verified excerpts do not provide individual pin numbers, electrical limits, or a public pin table, the package diagram is not fabricated here. The correct design process is to confirm every connection, power rail, bypass requirement, and signal-conditioning component against the official ADI datasheet. This page combines verified distributor availability, exact package information, and pricing references with explicit data-gap markers. It also provides application guidance and engineering cautions for a legacy CMOS multiplier without presenting unverified electrical specifications as factual. Buyers can use the linked LCSC datasheet and manufacturer documentation for procurement, pin verification, and production design decisions.

RFQ پەیوەندی
ADV7128KR30 - 10-Bit 80 MHz Video DAC | Analog Devices
ADV7128KR30

ADV7128KR30 - 10-Bit 80 MHz Video DAC | Analog Devices

The Analog Devices ADV7128KR30 is a 10-bit video-speed digital-to-analog converter built on a +5 V CMOS process, with an 80 MHz pipelined operating rate and a 28-pin SOIC package. The converter accepts a standard TTL-compatible 10-bit pixel input interface and generates current-source analog video outputs compatible with RS-343A, RS-170, and proposed HDTV production standards, including SMPTE 240M. A video DAC is a digital-to-analog converter specialized for converting parallel pixel data into analog video signals. Within the broader signal-conversion hierarchy, it belongs to the DAC and ADC/DAC converter family, combining a digital pixel interface, a reference-voltage input, and a high-impedance analog current-source output. This structure allows graphics, broadcast, television, and industrial display equipment to use digital video data internally while presenting conventional analog video at the output. Principal features include 80 MHz pipelined operation, 10-bit conversion resolution, TTL-compatible inputs, a single +5 V supply, and RS-343A and RS-170 output compatibility. According to the manufacturer datasheet, the monolithic CMOS construction provides high functionality with low power dissipation. The device requires an external 1.23 V reference and a pixel-clock input, while its high-impedance analog output is implemented as a current source. The ADV7128KR30 is identified by the ADV7128 family name and the KR30 ordering suffix. Verified distributor records identify the device as a single-channel, 10-bit, 28-pin SOIC video DAC operating at 5.0 V, with the KR30 variant commonly listed for a 30 MHz-class application designation in distributor catalogs. The manufacturer PDF also documents operation up to 80 MHz in pipelined mode, making the ordering suffix insufficient by itself to describe all supported timing performance. Typical uses include high-definition television video generation, high-resolution color graphics, digital video recording equipment, broadcast monitor systems, and industrial imaging panels. The TTL input interface simplifies connection to legacy video-controller logic, while the +5 V supply architecture allows integration into equipment that already uses conventional +5 V video electronics. Designers should treat the analog output as a current-source output and follow the manufacturer's recommended load and termination network. Layout should keep digital pixel-clock traces away from the analog outputs, and the external 1.23 V reference must be decoupled and routed according to the datasheet application circuit. Supply bypassing, output termination, and connector grounding remain critical to preserving usable video quality. This page combines the manufacturer datasheet, distributor catalog data, pricing context, and package-specific replacement information that is not consolidated in a single distributor listing. It also identifies where verified drop-in substitution data is limited, helping engineers distinguish a genuine same-footprint replacement from a merely similar video DAC.

RFQ پەیوەندی
ADV7128KR30-REEL - 10-Bit 80 MHz Video DAC | Analog Devices (Tape & Reel)
ADV7128KR30-REEL

ADV7128KR30-REEL - 10-Bit 80 MHz Video DAC | Analog Devices (Tape & Reel)

The Analog Devices ADV7128KR30-REEL is a 10-bit video-speed digital-to-analog converter built on a +5 V CMOS process, with an 80 MHz pipelined operating rate and a 28-pin SOIC package. The converter accepts a standard TTL-compatible 10-bit pixel input interface and generates current-source analog video outputs compatible with RS-343A, RS-170, and proposed HDTV production standards, including SMPTE 240M. A video DAC is a digital-to-analog converter specialized for converting parallel pixel data into analog video signals. Within the broader signal-conversion hierarchy, it belongs to the DAC and ADC/DAC converter family, combining a digital pixel interface, a reference-voltage input, and a high-impedance analog current-source output. This structure allows graphics, broadcast, television, and industrial display equipment to use digital video data internally while presenting conventional analog video at the output. Principal features include 80 MHz pipelined operation, 10-bit conversion resolution, TTL-compatible inputs, a single +5 V supply, and RS-343A and RS-170 output compatibility. According to the manufacturer datasheet, the monolithic CMOS construction provides high functionality with low power dissipation. The device requires an external 1.23 V reference and a pixel-clock input, while its high-impedance analog output is implemented as a current source. The ADV7128KR30-REEL is identified by the ADV7128 family name and the KR30 ordering suffix. Verified distributor records identify the device as a single-channel, 10-bit, 28-pin SOIC video DAC operating at 5.0 V, with the KR30 variant commonly listed for a 30 MHz-class application designation in distributor catalogs. The manufacturer PDF also documents operation up to 80 MHz in pipelined mode, making the ordering suffix insufficient by itself to describe all supported timing performance. Typical uses include high-definition television video generation, high-resolution color graphics, digital video recording equipment, broadcast monitor systems, and industrial imaging panels. The TTL input interface simplifies connection to legacy video-controller logic, while the +5 V supply architecture allows integration into equipment that already uses conventional +5 V video electronics. Designers should treat the analog output as a current-source output and follow the manufacturer's recommended load and termination network. Layout should keep digital pixel-clock traces away from the analog outputs, and the external 1.23 V reference must be decoupled and routed according to the datasheet application circuit. Supply bypassing, output termination, and connector grounding remain critical to preserving usable video quality. This page combines the manufacturer datasheet, distributor catalog data, pricing context, and package-specific replacement information that is not consolidated in a single distributor listing. It also identifies where verified drop-in substitution data is limited, helping engineers distinguish a genuine same-footprint replacement from a merely similar video DAC.

RFQ پەیوەندی
ADV7128KR50 - 10-Bit 80 MHz Video DAC | Analog Devices
ADV7128KR50

ADV7128KR50 - 10-Bit 80 MHz Video DAC | Analog Devices

The Analog Devices ADV7128KR50 is a 10-bit video digital-to-analog converter operating at up to 80 MHz in a 28-pin SOIC package. The device accepts TTL-compatible 10-bit pixel data, requires a single +5 V supply over 4.75 V to 5.25 V, and produces a high-impedance current-source output compatible with RS-343A and RS-170 video systems. Its monochrome video DAC architecture supports direct digital-to-analog conversion for graphics and broadcast equipment. A video DAC is a specialized digital-to-analog converter that translates digital pixel values into analog video signals. Within the broader hierarchy of data converters, it belongs to the ADC/DAC category and then to the video DAC subcategory, where conversion speed, pixel-clock handling, TTL interface compatibility, and standardized analog output characteristics matter more than general-purpose precision DAC flexibility. The ADV7128 integrates a high-speed 10-bit D/A converter, a standard TTL input interface, and a high-impedance analog current-source output on one monolithic CMOS chip. According to the manufacturer product page, operation requires only a +5 V power supply, an external 1.23 V reference, and a pixel-clock input. This integration reduces the external component count in a video generation path while preserving compatibility with established analog video systems. The converter uses pipelined operation to support an 80 MHz pixel rate. The supplied product information identifies 10-bit resolution, TTL-compatible digital inputs, and RS-343A and RS-170 compatible outputs. These characteristics make the device suitable for high-definition television, high-resolution color graphics, digital video recording, and other systems that require parallel digital pixels and conventional composite or component-style video outputs. As an analog output device, the ADV7128 should be evaluated for reference accuracy, output compliance, monitor impedance, cable loading, and the required video standard rather than only for sample rate. The external 1.23 V reference is central to the conversion chain, so its accuracy and noise directly influence the resulting analog video quality. Layout should also preserve a low-impedance return path between the DAC, reference source, and analog output network. A key design consideration is that the ADV7128 is a legacy video converter rather than a general-purpose current-output DAC. Existing boards should preserve the manufacturer reference and output network, while new designs should verify compatibility with the target monitor and video timing standard. The verified material does not provide a complete pin table, current-output range, settling time, or thermal resistance, so those values must be confirmed from the manufacturer datasheet before release to production. This page consolidates the verified manufacturer and distributor information, distinguishes the 80 MHz family description from the 50 MSPS wording used by one reseller, and provides application guidance, comparisons, and practical design notes that are not consolidated in a single manufacturer product listing.

RFQ پەیوەندی
ADV7128KR50-REEL - 10-Bit 80 MHz Video DAC | Analog Devices (Tape & Reel)
ADV7128KR50-REEL

ADV7128KR50-REEL - 10-Bit 80 MHz Video DAC | Analog Devices (Tape & Reel)

The Analog Devices ADV7128KR50-REEL is a 10-bit video digital-to-analog converter operating at up to 80 MHz in a 28-pin SOIC package. The device accepts TTL-compatible 10-bit pixel data, requires a single +5 V supply over 4.75 V to 5.25 V, and produces a high-impedance current-source output compatible with RS-343A and RS-170 video systems. Its monochrome video DAC architecture supports direct digital-to-analog conversion for graphics and broadcast equipment. A video DAC is a specialized digital-to-analog converter that translates digital pixel values into analog video signals. Within the broader hierarchy of data converters, it belongs to the ADC/DAC category and then to the video DAC subcategory, where conversion speed, pixel-clock handling, TTL interface compatibility, and standardized analog output characteristics matter more than general-purpose precision DAC flexibility. The ADV7128 integrates a high-speed 10-bit D/A converter, a standard TTL input interface, and a high-impedance analog current-source output on one monolithic CMOS chip. According to the manufacturer product page, operation requires only a +5 V power supply, an external 1.23 V reference, and a pixel-clock input. This integration reduces the external component count in a video generation path while preserving compatibility with established analog video systems. The converter uses pipelined operation to support an 80 MHz pixel rate. The supplied product information identifies 10-bit resolution, TTL-compatible digital inputs, and RS-343A and RS-170 compatible outputs. These characteristics make the device suitable for high-definition television, high-resolution color graphics, digital video recording, and other systems that require parallel digital pixels and conventional composite or component-style video outputs. As an analog output device, the ADV7128 should be evaluated for reference accuracy, output compliance, monitor impedance, cable loading, and the required video standard rather than only for sample rate. The external 1.23 V reference is central to the conversion chain, so its accuracy and noise directly influence the resulting analog video quality. Layout should also preserve a low-impedance return path between the DAC, reference source, and analog output network. A key design consideration is that the ADV7128 is a legacy video converter rather than a general-purpose current-output DAC. Existing boards should preserve the manufacturer reference and output network, while new designs should verify compatibility with the target monitor and video timing standard. The verified material does not provide a complete pin table, current-output range, settling time, or thermal resistance, so those values must be confirmed from the manufacturer datasheet before release to production. This page consolidates the verified manufacturer and distributor information, distinguishes the 80 MHz family description from the 50 MSPS wording used by one reseller, and provides application guidance, comparisons, and practical design notes that are not consolidated in a single manufacturer product listing.

RFQ پەیوەندی
ADV7128KR80 - 80MHz 10-Bit Video DAC | Analog Devices
ADV7128KR80

ADV7128KR80 - 80MHz 10-Bit Video DAC | Analog Devices

The Analog Devices ADV7128KR80 is a CMOS video-speed digital-to-analog converter operating up to 80 MHz, with a 10-bit pixel input port and high-impedance analog current-source outputs in a 28-pin SOIC package. It operates from a single +5 V supply, accepts TTL-compatible digital inputs, and requires an external 1.23 V reference and pixel-clock input. Its outputs are compatible with RS-343A and RS-170 video systems. A video DAC is a mixed-signal semiconductor that converts parallel digital pixel data into an analog video signal. It belongs to the DAC and digital-to-analog converter hierarchy, which sits within ADC/DAC and broader data-conversion semiconductor categories. The ADV7128 combines a high-speed digital input interface, a 10-bit converter core, and analog current-source outputs in one monolithic device, making it suitable for graphics, broadcast, and digital-video equipment. The principal features of the ADV7128KR80 are its 80 MHz pipelined operating rate, 10-bit conversion resolution, standard TTL input compatibility, and support for both RS-343A and RS-170 output standards. These characteristics allow the converter to process digital pixel streams at rates commonly encountered in high-resolution color graphics and professional video systems while retaining a straightforward digital interface. Technically, the device uses CMOS monolithic construction and produces its video signal through a high-impedance analog current source. An external 1.23 V reference establishes the converter reference level, while the pixel clock synchronizes the digital-to-analog conversion process. Because the interface is TTL-compatible and the analog output is current-based, PCB layout should minimize digital-clock noise near the output network and preserve clean reference and analog routing. Typical applications include high-definition television equipment, high-resolution color graphics systems, broadcast video conversion, digital display interfaces, and multimedia video hardware. The ADV7128 is particularly appropriate where an older RS-343A or RS-170-compatible video output is required but a modern parallel DAC with a single +5 V supply is preferred. The primary design consideration is external-component and signal-integrity planning. The 1.23 V reference, pixel clock, digital input traces, and analog output network must be routed according to the manufacturer's recommended application circuit. Proper decoupling and controlled impedance are necessary to prevent digital switching activity from degrading video quality. This product data combines verified manufacturer information, distributor listings, lifecycle observations, and engineering guidance to clarify where the ADV7128KR80 fits. It also distinguishes verified drop-in alternatives from package or suffix changes that cannot safely be assumed as replacements.

RFQ پەیوەندی
ADV7128KR80-REEL - 80MHz 10-Bit Video DAC | Analog Devices (Tape & Reel)
ADV7128KR80-REEL

ADV7128KR80-REEL - 80MHz 10-Bit Video DAC | Analog Devices (Tape & Reel)

The Analog Devices ADV7128KR80-REEL is a CMOS video-speed digital-to-analog converter operating up to 80 MHz, with a 10-bit pixel input port and high-impedance analog current-source outputs in a 28-pin SOIC package. It operates from a single +5 V supply, accepts TTL-compatible digital inputs, and requires an external 1.23 V reference and pixel-clock input. Its outputs are compatible with RS-343A and RS-170 video systems. A video DAC is a mixed-signal semiconductor that converts parallel digital pixel data into an analog video signal. It belongs to the DAC and digital-to-analog converter hierarchy, which sits within ADC/DAC and broader data-conversion semiconductor categories. The ADV7128 combines a high-speed digital input interface, a 10-bit converter core, and analog current-source outputs in one monolithic device, making it suitable for graphics, broadcast, and digital-video equipment. The principal features of the ADV7128KR80-REEL are its 80 MHz pipelined operating rate, 10-bit conversion resolution, standard TTL input compatibility, and support for both RS-343A and RS-170 output standards. These characteristics allow the converter to process digital pixel streams at rates commonly encountered in high-resolution color graphics and professional video systems while retaining a straightforward digital interface. Technically, the device uses CMOS monolithic construction and produces its video signal through a high-impedance analog current source. An external 1.23 V reference establishes the converter reference level, while the pixel clock synchronizes the digital-to-analog conversion process. Because the interface is TTL-compatible and the analog output is current-based, PCB layout should minimize digital-clock noise near the output network and preserve clean reference and analog routing. Typical applications include high-definition television equipment, high-resolution color graphics systems, broadcast video conversion, digital display interfaces, and multimedia video hardware. The ADV7128 is particularly appropriate where an older RS-343A or RS-170-compatible video output is required but a modern parallel DAC with a single +5 V supply is preferred. The primary design consideration is external-component and signal-integrity planning. The 1.23 V reference, pixel clock, digital input traces, and analog output network must be routed according to the manufacturer's recommended application circuit. Proper decoupling and controlled impedance are necessary to prevent digital switching activity from degrading video quality. This product data combines verified manufacturer information, distributor listings, lifecycle observations, and engineering guidance to clarify where the ADV7128KR80-REEL fits. It also distinguishes verified drop-in alternatives from package or suffix changes that cannot safely be assumed as replacements.

RFQ پەیوەندی
ADV7128KRZ80 - 10-Bit 80 MHz Video DAC | Analog Devices
ADV7128KRZ80

ADV7128KRZ80 - 10-Bit 80 MHz Video DAC | Analog Devices

The Analog Devices ADV7128KRZ80 is a monolithic 10-bit video digital-to-analog converter operating at an 80 MHz pixel rate, using a single +5 V supply and an external 1.23 V reference in a 28-lead SOIC package. It combines a 10-bit pixel input interface, a high-speed video DAC, and a high-impedance analog current-source output for digital-to-analog video conversion. A video DAC is a specialized data converter that translates parallel pixel data into a continuous analog video signal. It belongs to the digital-to-analog converter hierarchy, which falls under data converters, mixed-signal integrated circuits, and semiconductor signal-processing devices. Video DACs are used where an FPGA, ASIC, image processor, or graphics controller generates digital pixels that must drive an analog display or downstream video-processing circuit. The core ADV7128 feature set includes 10-bit resolution, an 80 MHz pixel clock capability, a standard TTL-compatible input interface, and a high-impedance analog current-source output. Operation from a single +5 V supply simplifies system power design, while the external 1.23 V reference allows the converter's accuracy and output scale to be tied to a shared precision reference. The commercial-grade ordering option supports an ambient temperature range from 0°C to +70°C. The monolithic implementation establishes a direct path from the 10-bit pixel input port to the analog output current source. The TTL input interface allows the device to operate alongside compatible digital video logic, while the high-impedance output supports downstream analog signal conditioning. The specified supply operating range of 4.75 V to 5.25 V provides 250 mV of headroom below and above the nominal +5 V rail, accommodating normal supply variation. Typical applications include RGB video generation, broadcast and professional video equipment, graphics and imaging systems, digital display test systems, and FPGA-based video output cards. In each case, the ADV7128 can generate an analog video waveform from parallel pixel data when the receiving equipment still requires a conventional analog input. When designing around the ADV7128, preserve adequate grounding and short analog-output paths, and follow the pin-description and reference-circuit recommendations in the manufacturer datasheet. The external 1.23 V reference must be clean and stable because reference noise can appear directly in the reconstructed video output. Supply bypassing and output-conversion circuitry should be evaluated together to avoid limiting the converter's intended video performance. This page combines the manufacturer specifications with practical architecture guidance, drop-in family candidates, sourcing information, and design notes. It also distinguishes orderable variants by temperature grade and package while preserving the strict requirement that every proposed replacement retain the same 28-lead SOIC footprint.

RFQ پەیوەندی
ADV7129KS - 360 MHz Triple 8-Bit Video DAC | Analog Devices
ADV7129KS

ADV7129KS - 360 MHz Triple 8-Bit Video DAC | Analog Devices

The Analog Devices ADV7129KS is a 360 MHz, 24-bit true-color video digital-to-analog converter with triple 8-bit DACs, an onboard phase-locked loop, an internal voltage reference, and a programmable 192-bit pixel port. It is supplied in a 304-lead PQFP package and operates from a single +5 V CMOS supply. The device supports RS-343A and RS-170 compatible analog outputs and TTL-compatible digital inputs, making it a consolidated solution for high-resolution graphics and imaging systems. A video DAC is a digital-to-analog converter specifically optimized for reconstructing analog red, green, and blue video signals from digital pixel data. Within the broader hierarchy of DAC → converter IC → data-conversion semiconductor, it combines parallel digital input, color conversion, clock generation, reference circuitry, and three analog output channels in one monolithic device. This integration reduces the component count and simplifies synchronization in professional video, graphics, and imaging equipment. The ADV7129KS supports 360 MHz operation in 24-bit true-color mode and uses an 8:1 input multiplexing arrangement. Its programmable 192-bit pixel port accommodates different pixel organizations, while the internal voltage reference and onboard PLL reduce external support circuitry. The DAC-to-DAC matching specification is typically 2% and is adjustable to 0.02%, according to the manufacturer datasheet. The three 8-bit converters produce separate red, green, and blue analog outputs from shared pixel data. Eight-to-one multiplexing allows a compact digital interface to feed the high-speed converters, and the onboard PLL provides clocking from an external reference. The S-304 package is a 304-lead PQFP, and the ordering guide identifies ADV7129KS for the 0°C to +70°C temperature range. Typical uses include high-resolution graphics systems, medical imaging, professional video equipment, digital signage, broadcast monitoring, and industrial imaging. The integrated reference and PLL are particularly useful where component count, synchronization, and analog-output matching matter more than low cost or minimal power consumption. When designing around this DAC, preserve the high-speed pixel and clock routing implied by the 304-pin PQFP footprint and use controlled-impedance PCB layout. Differential clocking, short analog traces, suitable grounding, and decoupling close to the supply pins are essential for dependable output performance at the device's 360 MHz capability. This page combines verified manufacturer specifications, distributor pricing, same-package replacement analysis, and practical PCB guidance to support component selection and board-level implementation.

RFQ پەیوەندی
ADV7160KS170 - 220MHz 96-Bit True-Color RAM-DAC | Analog Devices
ADV7160KS170

ADV7160KS170 - 220MHz 96-Bit True-Color RAM-DAC | Analog Devices

The Analog Devices ADV7160KS170 is a 96-bit, 220 MHz true-color video RAM-DAC with three 10-bit gamma-correcting digital-to-analog converters in a 160-pin MQFP package. It accepts a 96-bit pixel input, supports true-color operation, and includes an on-board color palette RAM and a user-definable cursor. The device is designed for high-resolution digital video systems requiring multiple synchronized RGB output channels and programmable gamma correction. A RAM-DAC is a video interface integrated circuit that receives digital pixel data, applies palette and gamma functions, and generates analog red, green, and blue output voltages. Within the broader hierarchy of DACs and signal converters, the ADV7160KS170 belongs to the specialized true-color video RAM-DAC class. This category combines frame-buffer addressing, digital color processing, cursor generation, and analog RGB output functions in one device. The principal functional features include a 96-bit pixel port for screen-resolution data, a 220 MHz operating specification, three 10-bit gamma-correcting D/A converters, and 2% maximum DAC-to-DAC color matching. The triple 30-bit palette organization described for the device supports programmable color lookup, while the on-board cursor allows overlay information to be inserted without an external overlay generator. The suffix KS170 identifies this specific ordering configuration. The architecture combines digital video input, color-palette RAM, gamma correction, cursor generation, and three parallel DAC output paths. A 220 MHz pixel interface permits high-rate transfer of digital color data, while 10-bit resolution per color channel provides 10-bit true-color output. The stated 2% maximum DAC-to-DAC color-matching limit addresses consistency among the red, green, and blue conversion paths. Exact clock timing, output voltage, power consumption, and synchronization requirements must be established from the manufacturer datasheet and its pin-description tables. Typical uses include digital video controllers, graphics and display subsystems, broadcast or professional video equipment, and embedded computer systems that require an integrated multi-channel RGB DAC. The integrated palette RAM is useful when source data uses indexed or palette-based colors, while true-color mode supports direct 24-bit or 30-bit gamma-corrected content. The user-definable cursor is useful for overlays such as menus, measurement markers, or status indicators. The most important design step is to preserve the device's complete digital-video timing and data-interface behavior. Route the pixel input according to the manufacturer's recommended topology, use the specified synchronization and clock signals, and terminate analog outputs in the manner specified by the application circuit. Because the MQFP package has many pins and exposed board-space requirements, footprint compatibility must be confirmed before considering any alternate ordering code as a drop-in replacement. This product record combines the confirmed 96-bit, 220 MHz, triple-10-bit, and color-matching characteristics with application guidance, package constraints, and an explicit drop-in assessment. It also separates confirmed production data from parameters that require direct review of the manufacturer datasheet, helping engineers evaluate replacement risk before committing a PCB design.

RFQ پەیوەندی
ADV7160KS220 - 220MHz True-Color Video RAM-DAC | Analog Devices
ADV7160KS220

ADV7160KS220 - 220MHz True-Color Video RAM-DAC | Analog Devices

Analog Devices ADV7160KS220 is a 96-bit, 220 MHz true-color video RAM-DAC with three 10-bit gamma-correcting digital-to-analog converters in a 160-pin MQFP package. Its pixel interface supports 24-bit true color or 30-bit gamma-corrected operation, while its three synchronized DAC channels provide parallel analog video outputs. A video RAM-DAC is a display-specific data converter that combines a digital pixel-port interface, color lookup and palette functions, and analog DAC outputs. In the broader semiconductor hierarchy, the ADV7160 belongs to the DAC and ADC/DAC family of interface ICs used to translate digital graphics data into RGB analog signals for display equipment. The principal features of the ADV7160KS220 include a 96-bit pixel port, a 220 MHz operating rate, triple 10-bit DACs, and support for 24-bit true-color or 30-bit gamma-corrected video. The device also includes a phase-locked loop and a 64 × 64 hardware cursor, allowing graphics timing and cursor overlay functions to be integrated into one display-controller interface. Its color architecture centers on three 10-bit DAC channels for red, green, and blue video generation. A triple-palette RAM is identified as an additional device feature, enabling programmable color-table operation where supported by the associated graphics system. The hardware cursor can generate overlay graphics independently of the main pixel stream, which is useful for menus, measurement markers, and on-screen status displays. Typical applications include professional video monitors, broadcast display equipment, industrial panel displays, frame buffers, graphics terminals, and legacy multi-sync computer displays. The 220 MHz pixel rate is particularly relevant to designs requiring high-bandwidth analog RGB output and broad compatibility with established video timing architectures. System design should preserve the manufacturer-recommended clocking, memory, synchronization, and output-network arrangements. Because the device combines high-speed digital inputs with sensitive analog outputs, PCB trace management, grounding, and DAC output conditioning are important for maintaining image quality and reliable synchronization. This product page consolidates the core device capabilities, application guidance, sourcing questions, and technical distinctions into one engineering-focused reference for evaluating the ADV7160KS220 in display and graphics systems.

RFQ پەیوەندی
ADV7162KS140 - 220 MHz True-Color Video RAM-DAC | Analog Devices
ADV7162KS140

ADV7162KS140 - 220 MHz True-Color Video RAM-DAC | Analog Devices

Analog Devices ADV7162KS140 is a 220 MHz true-color video RAM-DAC with a 96-bit pixel port, three 10-bit gamma-correcting DAC channels, an integrated PLL, and a 64 × 64 hardware cursor in a 160-pin MQFP package. The device converts digital pixel and palette data into synchronized red, green, and blue analog video signals for high-performance graphics workstations and Windows accelerator subsystems. A video RAM-DAC is a specialized digital-to-analog converter that combines color DACs, palette storage, pixel-data handling, clock generation, and display timing in one integrated circuit. It belongs to the DAC and ADC/DAC hierarchy, where the RAM-DAC adds graphics-specific memory and cursor functions to the basic role of converting digital values into analog voltages. This integration reduces the number of separate components required in a graphics subsystem. The ADV7162KS140 supports a 96-bit pixel port for high screen resolutions and provides triple 10-bit DACs with gamma correction. Maximum DAC-to-DAC color matching is 2%. Its integrated PLL supports synchronization of the digital interface and analog outputs, while the on-board 64 × 64 cursor permits hardware display of a programmable pointer without requiring separate cursor-generation logic. The 160-lead MQFP package provides a substantial pin count for the wide pixel port, three analog DAC outputs, palette and cursor interfaces, synchronization signals, control inputs, and power connections. Because this is a mixed-signal graphics IC, correct implementation requires careful separation between digital pixel, memory, and clock traces and the sensitive red, green, and blue analog outputs. The 220 MHz operating capability makes the device suited to demanding legacy workstation and accelerator designs rather than modern low-resolution consumer displays. Typical uses include color graphics workstations, Windows accelerator cards, industrial CRT graphics controllers, professional visualization systems, and embedded legacy display subsystems. In these systems, the RAM-DAC accepts pixel data, retrieves color information from palette memory, and converts the selected color into three analog video channels. The hardware cursor can be overlaid independently, simplifying pointer display in graphical user interfaces. A key design consideration is analog-output implementation. Route the three DAC outputs as short, controlled-impedance traces, provide the required supply and reference bypassing, and follow the manufacturer datasheet for termination and output-buffer recommendations. Keep switching-clock and high-speed digital traces away from the analog outputs to minimize color-conversion errors and preserve image quality. This product page combines the device architecture, pin-package information, practical signal-integrity guidance, application context, and a structured drop-in alternative review for engineers evaluating legacy graphics-controller upgrades.

RFQ پەیوەندی
ADV7162KS220 - 220MHz True-Color Video RAM-DAC | Analog Devices
ADV7162KS220

ADV7162KS220 - 220MHz True-Color Video RAM-DAC | Analog Devices

Analog Devices ADV7162KS220 is a 96-bit, 220 MHz true-color video RAM-DAC with three 10-bit gamma-correcting digital-to-analog converters, a 96-bit pixel input port, an on-board color palette RAM, and a user-definable hardware cursor. The device is supplied in a 160-pin QFP package for professional graphics, workstation, and accelerator video subsystems. A video RAM-DAC is a specialized digital-to-analog converter that converts stored frame-buffer pixel data into three analog red, green, and blue video signals. It belongs to the video DAC, graphics-controller interface, display converter, and broader signal-processing IC categories. The ADV7162 family was designed to combine high-bandwidth digital pixel input with gamma correction and palette management on one integrated circuit. The principal features include a 96-bit pixel port supporting high screen resolutions, operation up to 220 MHz, three 10-bit gamma-correcting DAC channels, and a maximum DAC-to-DAC color matching error of 2%. The integrated palette RAM provides programmable color lookup, while the hardware cursor and 64 by 64 cursor structure support graphics overlays without consuming external frame-buffer resources. The device includes a phase-locked loop and a 64 by 64 hardware cursor according to the Analog Devices ADV7160/ADV7162 datasheet. Together, these blocks support synchronized video generation and overlay handling in high-performance color graphics workstations and Windows accelerator subsystems. The three independent 10-bit DAC channels provide 1,024 code levels per primary color channel before external gamma correction. ADV7162KS220 is appropriate for workstation graphics, professional video walls, high-end display controllers, CRT display systems, and legacy accelerator cards operating with analog RGB interfaces. Its 220 MHz pixel rate provides the required throughput for demanding display modes, while the 96-bit pixel port simplifies the connection to frame-buffer and graphics-memory subsystems. PCB implementation requires careful treatment of the 160-pin QFP footprint, analog video outputs, clocking, digital input timing, power distribution, and exposed return paths. Follow the manufacturer’s pin-description and layout guidance in the ADV7160/ADV7162 datasheet. Because these are high-speed analog and digital signals on one package, controlled impedance routing, solid ground-plane continuity, and short output paths are essential for preserving video quality. This page combines the manufacturer’s stated 220 MHz, 96-bit, triple 10-bit DAC, palette, cursor, PLL, and QFP-160 characteristics with application guidance, comparison considerations, and practical PCB design notes. It helps engineers determine whether the ADV7162KS220 fits a legacy analog-RGB graphics design before requesting a quotation for availability and lead time.

RFQ پەیوەندی
ADV7182WBCPZ-RL - 10-Bit SDTV Video Decoder | Analog Devices
ADV7182WBCPZ-RL

ADV7182WBCPZ-RL - 10-Bit SDTV Video Decoder | Analog Devices

Analog Devices ADV7182WBCPZ-RL is a 10-bit standard-definition television video decoder with differential inputs, four analog video input channels, and a 32-LFCSP 5 x 5 mm package. It converts worldwide NTSC, PAL, and SECAM composite, S-Video, and component baseband signals into a 4:2:2 component video data stream compatible with the 8-bit ITU-R BT.656 interface. A video decoder is a signal-processing IC that recovers digital luminance and chrominance data from an analog baseband video signal. It sits between an analog camera or video source and a digital display, video processor, image sensor, or FPGA. In the device hierarchy, the ADV7182 is an analog-to-digital video conversion IC within the broader ADC/DAC and signal-processing semiconductor categories. The decoder uses a 10-bit ADC with 4-times oversampling per channel for CVBS, Y/C, and YPrPb formats. Fully differential, pseudo-differential, and single-ended input configurations are supported. Four analog input channels provide flexibility for composite, S-Video, or component sources, while on-chip antialiasing filtering reduces unwanted out-of-band energy before conversion. External horizontal sync, vertical sync, and field signals can provide timing references for LCD controllers and other video ASICs. The output stage supports 8-bit ITU-R BT.656, while the internal converter preserves 10-bit processing resolution. The ADV7182 family also offers automatic standard detection and demodulation, reducing the host processor burden during analog-to-digital video conversion. Typical uses include automotive infotainment displays, industrial vision panels, surveillance equipment, video capture modules, and legacy analog-video interface boards. The differential-input architecture is particularly useful when the source has substantial ground offset or noise coupling, although correct source impedance and grounding remain essential to preserve signal integrity. Design the board around the 32-LFCSP exposed-pad land pattern, analog input routing, and the manufacturer's recommended decoupling. Place analog and digital return paths carefully, provide low-impedance connections to the exposed pad, and account for thermal performance when the surrounding PCB cannot dissipate heat effectively. The manufacturer marks the ADV7182 as not recommended for new designs, so legacy maintenance and compatible-product migration require careful review. This page organizes the functional capabilities, lifecycle position, package constraints, drop-in candidates, interface considerations, and application-specific trade-offs. It also identifies where board-level validation is necessary because analog video noise, synchronization, and thermal performance depend on the complete source and receiver implementation rather than on the decoder alone.

RFQ پەیوەندی
ADV7195KS - 3-Channel 11-Bit Video DAC Encoder | Analog Devices
ADV7195KS

ADV7195KS - 3-Channel 11-Bit Video DAC Encoder | Analog Devices

The Analog Devices ADV7195KS is a triple high-speed digital-to-analog video encoder with three 11-bit DACs and a 10-bit digital data input interface. Designed for progressive-scan and HDTV video systems, the device accepts YCrCb data and supports 2 x 10-bit 4:2:2 or 3 x 10-bit 4:4:4 input formats. It is supplied in a 52-lead MQFP package identified by the KS package suffix. A video DAC is an interface-integrated data converter that transforms digital YCrCb video samples into three analog color-component outputs. Within the broader signal-chain hierarchy, the ADV7195 belongs to the video encoder family, which combines digital-to-analog conversion with color encoding. This makes it suitable for professional video equipment, broadcast infrastructure, display-generation systems, and other multichannel analog-video applications where three coordinated outputs are required. The verified part description identifies three high-speed video D/A converters with TTL-compatible inputs. It also identifies progressive-scan and HDTV encoder operation with a 10-bit data input. These features distinguish the ADV7195 from lower-resolution or single-channel DAC solutions. The manufacturer data supplied for this record does not include a complete electrical limit table, so individual voltage, timing, clock, output, and temperature values remain marked for data collection rather than being inferred. The device uses YCrCb component coding, with the verified input options covering 4:2:2 and 4:4:4 arrangements. In practical systems, the input architecture must match the source format and resolution. The three-channel organization supports separate analog outputs for the luma-related and chroma-related video signals, while the exact sync and blanking implementation must be established from the manufacturer datasheet and application schematics before layout is released. Typical uses include professional broadcast monitors, video test and measurement equipment, HDTV production infrastructure, progressive-scan display systems, and video signal-generation equipment. In each case, the ADV7195KS can combine a digital video source with three DAC channels while preserving the intended progressive-scan or HDTV signal architecture. System designers should still validate timing, DAC settling behavior, output compliance, and synchronization against their specific source and load requirements. The most important design consideration is interface verification. Because the available verification identifies a 52-lead MQFP package but does not provide a complete authoritative pin table, the pinout should be checked directly against the Analog Devices datasheet before PCB routing. Input timing, DAC output reference, supply rails, decoupling, and unused-pin handling must also follow the datasheet rather than assumptions based only on generic video-encoder practice. This page consolidates the verified ADV7195KS function, package information, lifecycle evidence, sourcing references, and cross-reference candidates into an engineering-focused product record. It also distinguishes confirmed drop-in alternatives from related encoder families that may require different packages or verification, helping procurement and design teams avoid treating functional similarity as guaranteed pin compatibility.

RFQ پەیوەندی
ADV7202KST - 12-Bit 5-Channel Video Codec | Analog Devices
ADV7202KST

ADV7202KST - 12-Bit 5-Channel Video Codec | Analog Devices

The Analog Devices ADV7202KST is a 12-bit simultaneous-sampling video-rate sampling codec capable of sampling up to five NTSC, PAL, or SECAM composite video input signals. The device combines one analog-to-digital converter, four digital-to-analog converters, a 64-pin LQFP package, and front-end resolution in which two of the 12 bits are assigned to gain and offset adjustment. It is designed for multi-channel analog video acquisition, conversion, and reconstruction systems. A video codec is a mixed-signal interface IC that converts analog video into digital data and can also produce analog video outputs. In the signal-processing hierarchy, the ADV7202 belongs to the codec family, interface IC class, and broader data-conversion semiconductor category. Its five-input capability allows one device to support several standard-definition video sources, while its four DAC outputs support reconstruction or monitoring paths. The principal verified features include simultaneous sampling of up to five composite video inputs, 12-bit front-end digitizer resolution, four video DAC channels, and 12-bit/10-bit digital data capability. The package is specified as 64-pin LQFP, also described in search data as PQFP64 or plastic LQFP-64. This integration can reduce the number of separate converters required in a video system, although exact timing, voltage, clock, output-format, and thermal details must be confirmed from the manufacturer documentation. The architecture is suited to systems that need a consolidated analog-video interface rather than discrete converters. Simultaneous sampling is important when multiple composite signals must share a defined acquisition moment, while the multiple DACs provide parallel analog-output capability. Digital resolution, clocking, sync handling, and supported video standards remain critical system constraints that depend on the selected operating mode and the complete ADV7202 datasheet. Typical uses include professional video test equipment, broadcast video monitoring, surveillance-system interfaces, video capture hardware, and multi-source analog-video switching systems. The component is particularly relevant when the board must ingest multiple composite video streams and retain flexible digital processing before conversion back to analog. Product selection should also account for source format, required resolution, supported clock, interface voltage, thermal conditions, and system timing. A practical design review begins with the ADV7202 datasheet pinout, electrical tables, timing diagrams, and application guidance. PCB layout should preserve analog and digital return paths, provide appropriate decoupling, and route high-speed digital signals with controlled impedance. Since the verified data does not include complete pin assignments or operating limits, engineers should not infer those values from generic codec designs. This page combines verified product, package, interface, and sourcing information with transparent data gaps, procurement guidance, and application-oriented engineering context. It distinguishes confirmed ADV7202KST facts from unverified parameters so designers can evaluate the codec efficiently without mistaking distributor summaries for a complete datasheet.

RFQ پەیوەندی
ADV7202KSTZ - 54 MHz Video Codec | Analog Devices | LQFP-64
ADV7202KSTZ

ADV7202KSTZ - 54 MHz Video Codec | Analog Devices | LQFP-64

Analog Devices ADV7202KSTZ is a simultaneous-sampling video-rate codec with one 12-bit video ADC, four 10-bit video DACs and a 54 MHz conversion rate, packaged in a 64-lead LQFP measuring 10 mm by 10 mm. It accepts up to five NTSC, PAL or SECAM composite video inputs and includes an 843 kHz SAR ADC for auxiliary system-monitoring inputs. The device supports 4:2:2, YCrCb and RGB/I/P video formats. A video codec is an interface IC that converts analog composite video into digital video samples and converts digital video back into analog output signals. This codec belongs to the broader ADC/DAC and video-interface hierarchy within integrated circuits. It combines a multi-channel video digitizer, four reconstruction DACs, analog clamp control and programmable gain control in one device, reducing the number of separate converters required by a video processing system. The main features include four 10-bit video DACs, 12-bit video digitization with two bits assigned to gain and offset adjustment, a 54 MHz conversion rate, and AGC control with a 6 dB range. The auxiliary SAR ADC can sample as many as eight inputs at 843 kHz for monitoring functions. A three-channel clamp control supports the composite-video front end, while five CVBS inputs allow multi-source conversion in professional and industrial video equipment. The ADV7202 architecture is intended for simultaneous conversion of several composite video channels. Its 12-bit ADC front end provides greater nominal resolution than the 10-bit output DACs, while AGC and clamp control help normalize signal level and remove video pedestal offsets. The four DACs support standard video output formats, allowing digitized channels to be processed and reconstructed without requiring four separate output converter packages. Typical uses include video surveillance systems, broadcast and professional video monitoring, industrial inspection equipment, video routers, security-camera interfaces and multichannel analog-video test systems. Simultaneous conversion is particularly useful when multiple composite sources must be captured at the same time for switching, recording, analysis or frame synchronization. PCB design should preserve short analog traces, provide stable analog and digital supplies, and place decoupling capacitors close to the relevant supply pins. Keep high-speed digital and analog-video return paths away from sensitive input traces, follow the reference-layout guidance in the manufacturer datasheet, and use controlled-length clock and serial-interface routing. Decoupling requirements, clock topology and unused-pin handling should be implemented exactly as specified in the datasheet pin-description table. This page consolidates the Analog Devices product information, exact package and conversion details, a verified same-family replacement candidate, and practical interface-layout guidance into a focused engineering reference for evaluating the ADV7202KSTZ in composite-video and multichannel monitoring designs.

RFQ پەیوەندی
ADV7281AWBCPZ-M - 10-Bit SDTV Video Decoder | Analog Devices
ADV7281AWBCPZ-M

ADV7281AWBCPZ-M - 10-Bit SDTV Video Decoder | Analog Devices

The Analog Devices ADV7281AWBCPZ-M is a 10-bit, 4-times-oversampled multiformat SDTV video decoder fabricated in a 1.8 V CMOS process and housed in a 32-LFCSP 5 mm × 5 mm package. It automatically recognizes worldwide NTSC, PAL, and SECAM analog baseband video and supports composite, S-Video, and component-video inputs. The decoder converts qualifying analog video into digital component data while providing an I2C-compatible control interface and integrated diagnostic outputs. A video decoder is a mixed-signal semiconductor that converts analog baseband video into digital pixels. It sits between an analog video source and a digital video processor, display controller, capture system, or automotive infotainment platform. By combining format detection, 10-bit digitization, four-times oversampling, and serial configuration in one package, the ADV7281-M reduces the number of external conversion and identification components required for standard-definition video ingestion. The ADV7281-M family provides six analog video inputs, two STB diagnostic pins, and three general-purpose outputs. Its multiformat architecture recognizes NTSC, PAL, and SECAM signals without a fixed regional setting. The 10-bit conversion path supports SDTV processing, while four-times oversampling improves sampling of the incoming analog waveform. Serial programming uses a two-wire, bidirectional I2C-compatible port, allowing a system controller to configure registers and read device status. According to the Analog Devices ADV7281 product page, the decoder operates from a 1.71 V to 1.89 V supply range and supports an ambient temperature range of -40°C to +105°C. These values suit compact industrial, consumer, and automotive equipment where a single low-voltage digital process must coexist with analog video inputs. Differential video inputs are specifically identified for the ADV7281-M configuration, helping the analog input network target the decoder’s expected signal characteristics. Typical uses include legacy video capture, industrial inspection equipment, broadcast monitoring, security-camera interfaces, set-top-box service designs, and automotive display systems that must accept composite, S-Video, or component analog video. The automatic standards detection is particularly useful in systems shared across regions because it reduces the number of manual configuration choices. The three general-purpose outputs and two STB diagnostic pins can support status, timing, or test functions when the host board and firmware provide the required circuits. The analog input network, power distribution, and digital interface layout determine practical performance. Differential source impedances should be matched, input filtering should preserve the intended video bandwidth, and I2C pull-ups should be sized for the bus voltage and capacitance. The exposed-pad construction also requires adequate PCB copper and a controlled thermal path. Because the LFCSP layout is not represented by an exact package-diagram library entry, use the manufacturer pin-definition table when assigning tracks. This page combines the manufacturer’s multiformat-decoder description with engineering-focused selection guidance, interface considerations, and package-level replacement analysis. It is designed to help engineers distinguish the standard-device variant from reel-ordering codes, select the correct Analog Devices family member, and plan PCB changes before committing to an analog-video ingestion architecture.

RFQ پەیوەندی
ADV7303AKST - 6-Channel 11-Bit Video DAC | Analog Devices
ADV7303AKST

ADV7303AKST - 6-Channel 11-Bit Video DAC | Analog Devices

Analog Devices ADV7303AKST is a multiformat SD, progressive-scan and HDTV video encoder with six 11-bit digital-to-analog converters in a 64-lead LQFP surface-mount package. It combines digital video encoding with analog baseband output generation, making it suitable for professional and broadcast video systems that require multiple video channels in one device. The ADV7303AKST operates from 2.5 V or 3.3 V supplies according to marketplace technical listings. A video DAC is a mixed-signal semiconductor that converts digitally represented image data into analog television signals. The ADV7303AKST belongs to the video encoder and DAC hierarchy: it accepts digital video information, performs required signal generation, and provides six analog output channels. This integration can reduce the component count and board area in systems that previously required separate video-output converter stages. The principal identified feature is six 11-bit DACs. Each converter provides a defined digital resolution for multiformat standard-definition, progressive-scan, and HDTV video generation. The device also supports PAL and NTSC video standards according to component listings, while its 64-LQFP package provides 64 electrical terminals for power, control, digital data, clocking, and analog-output connections. At the system level, the six outputs allow a single encoder to serve several analog video destinations or support multi-channel signal generation. The 11-bit converter resolution provides a more detailed digital-to-analog transition than lower-resolution video output stages, while the multiformat architecture allows the same encoder family to address different television standards and progressive-scan equipment. Typical applications include broadcast television equipment, SD and HDTV video production systems, professional video routers, television signal processing, monitoring infrastructure, and multichannel video test equipment. System integrators should verify signal timing, output standard configuration, DAC output levels, filtering, and synchronization against the manufacturer’s complete interface and application information before releasing production hardware. A critical implementation consideration is that video output quality depends on the complete analog path, not only on the nominal DAC resolution. Keep output routing short, maintain a controlled ground reference, and implement the manufacturer-recommended power and bypass networks close to the device. Because no single replacement was confirmed for this exact package and function, board compatibility should be established through schematic and pin-level review rather than assumed from a similar device description. The ADV7303AKST provides a compact six-channel video-output solution for systems requiring multiformat analog television generation. Its six 11-bit DACs, SD and progressive-scan capability, HDTV positioning, and 64-LQFP integration distinguish it from discrete video DAC arrangements and help reduce board complexity when a single multi-output encoder is preferable to separate converter channels.

RFQ پەیوەندی
ADV7314KST - 216 MHz Video Encoder with Six 14-Bit DACs | Analog Devices
ADV7314KST

ADV7314KST - 216 MHz Video Encoder with Six 14-Bit DACs | Analog Devices

The Analog Devices ADV7314KST is a multiformat 216 MHz video encoder with six 14-bit NSV DACs in a 64-lead LQFP package. It accepts parallel YCrCb high-definition input in 4:2:2 and 4:4:4 formats and supports SMPTE 293M 525p, BTA EDTV2 525p, ITU-R BT.1358 625p/525p, and ITU-R BT.1362 625p/525p video standards. Its integrated six-channel DAC architecture produces analog video outputs while supporting 216 MHz operation. A video encoder is an interface IC that converts digital component video into one or more analog output signals. The ADV7314KST belongs to the broader DAC and video-encoding hierarchy: digital video data enters through parallel YCrCb inputs, internal encoding and DAC circuitry generate composite or component outputs, and the resulting analog signals drive downstream display or broadcast equipment. Its 14-bit DAC resolution provides a defined numerical output-resolution characteristic for professional video systems. Key features include six 14-bit NSV video DACs, a 216 MHz operating specification, and parallel YCrCb input compatibility. The device supports both 4:2:2 and 4:4:4 high-definition input formats. Multiple listed television standards provide defined support for 525-line and 625-line systems, including SMPTE 293M, BTA EDTV2, ITU-R BT.1358, and ITU-R BT.1362. The 64-lead LQFP package supports surface-mount assembly and is identified as lead-free. Technically, the ADV7314KST combines digital video processing with six high-speed, multiformat NSV digital-to-analog converters. This integration reduces the number of discrete DAC channels required in a multichannel analog-video design. The 216 MHz headline specification identifies the device as intended for high-speed video processing, while the six-DAC configuration allows multiple video outputs to be generated from one package. Exact output current, DAC noise, power-supply limits, temperature limits, and timing values are not present in the supplied verified records and should be confirmed in the manufacturer datasheet before design release. Typical uses include professional broadcast video conversion, standard-definition television equipment, high-definition production electronics, video test and measurement systems, and digital-to-analog video processing modules. The 4:2:2 and 4:4:4 input support makes it relevant to systems handling subsampled and full-resolution chroma video. Six integrated DACs can reduce board area when the design requires six analog video channels rather than separate converter packages. Designers should confirm the exact pin assignments, output-routing options, synchronization requirements, supply rails, decoupling recommendations, and analog-video output topology against the ADV7314 manufacturer datasheet. PCB layout should preserve controlled clock and digital-video signal paths while providing a low-impedance return for each DAC output. Because the supplied search results do not provide a verified price, stock quantity, complete pinout, or detailed electrical limits, those items should not be inferred from generic distributor listings. This product page consolidates the verified multiformat 216 MHz specification, six 14-bit NSV DAC configuration, supported video standards, package information, source links, and same-family replacement guidance. It also distinguishes verified features from unavailable parameters and provides selection and comparison context that is not contained in the short distributor snippets.

RFQ پەیوەندی
ADV7343WBSTZ-RL - 6-Channel 11-Bit Video Encoder | Analog Devices
ADV7343WBSTZ-RL

ADV7343WBSTZ-RL - 6-Channel 11-Bit Video Encoder | Analog Devices

The Analog Devices ADV7343WBSTZ-RL is a high-speed, multiformat digital-to-analog video encoder with six 11-bit video DAC channels operating from a 3.3 V supply in a 64-lead LQFP package measuring 10 mm by 10 mm. It is designed for DVD, Blu-ray, set-top-box, and professional video systems requiring composite CVBS, S-Video, and component YPrPb or RGB outputs. A video encoder is a data-converter IC that converts digital video signals into legacy analog formats for display and downstream processing. Within the signal-chain hierarchy, the ADV7343 belongs to the video encoder class, uses multiple digital-to-analog converters, and integrates high-speed parallel digital video inputs with analog composite and component outputs. This makes it a bridge between digital video processing systems and equipment that still relies on analog video connections. Key features include six high-speed 11-bit DACs with an update rate of up to 297 MHz, 3.3 V operation, and support for composite, S-Video, YPrPb, and RGB outputs. The 64-lead LQFP package exposes the complete digital interface, analog output channels, reference connections, control signals, and power pins. The manufacturer describes the ADV7343 family as a multiformat video encoder intended for DVD and Blu-ray applications. Each internal DAC provides 11-bit digital resolution, allowing the encoder to represent luminance and chrominance levels required by standard-definition analog video. Six outputs support simultaneous generation of composite and component signals or multiple S-Video channels. The 297 MHz DAC rate defines the maximum conversion throughput and is particularly relevant when the design must accommodate standard-definition and progressive video formats within the device's supported timing range. Typical applications include DVD and Blu-ray player output stages, set-top-box and video-conversion equipment, professional analog video monitoring, broadcast production interfaces, and industrial video systems that must retain compatibility with CVBS, S-Video, or component displays. The encoder can also be used in test equipment that requires simultaneous analog representations of a digital video source. The primary design consideration is output-termination and signal-integrity management. Each analog output should use the recommended termination and filtering network, while digital video inputs require controlled-impedance routing and short traces. Use the pin-description table and application information in the Analog Devices ADV7343 datasheet when assigning the 64 package pins and laying out the converter outputs. This page combines the confirmed device characteristics with practical placement guidance, application-fit analysis, and package-level selection criteria. It also documents lifecycle and sourcing constraints so engineers can evaluate the ADV7343WBSTZ-RL against alternatives before committing a new design.

RFQ پەیوەندی
ADV7344BSTZ - 6-Channel 14-Bit Video DAC | Analog Devices
ADV7344BSTZ

ADV7344BSTZ - 6-Channel 14-Bit Video DAC | Analog Devices

Analog Devices ADV7344BSTZ is a multiformat video encoder containing six 14-bit noise-shaped video DACs, operating from a 3.3 V supply and supporting 74.25 MHz 20-bit or 30-bit high-definition digital video input. The device is packaged in a 64-LFCSP-VQ surface-mount package measuring 9 mm by 9 mm. Its six converter channels support composite CVBS, S-Video YC, and component YPrPb or RGB analog outputs. A video encoder is a signal-conversion integrated circuit that transforms digital video data into analog television signals. In the signal-chain hierarchy, the ADV7344BSTZ sits between a digital video source and an analog display or broadcast subsystem. Noise-shaped DAC architecture reduces unwanted high-frequency spectral content, while oversampling and digital reconstruction filters shape the analog output spectrum. The converter therefore belongs to the broader ADC/DAC, signal-processing IC, and power-management-adjacent semiconductor categories. The principal features include six independent 14-bit video DAC channels, 20-bit and 30-bit high-definition input support, and 16-times DAC oversampling at 216 MHz. The encoder supports standard-definition, enhanced-definition, and high-definition formats. It is compliant with SMPTE 296M for 720p and 1035i operation, as identified by the manufacturer product documentation. Six output channels also allow simultaneous generation of composite, S-Video, and component signals from one encoder. The internal noise-shaping and reconstruction architecture is intended to improve analog-video image quality while maintaining a high digital input bandwidth. The 74.25 MHz input capability accommodates common high-definition digital video streams, while the 216 MHz DAC oversampling rate supports the required reconstruction filtering. Configuration registers allow the host processor to select output formats and operating modes, reducing the need for external video-processing logic. Typical uses include DVD and Blu-ray player output stages, set-top boxes, video walls, broadcast equipment, professional video processors, and high-definition television electronics. The six-channel architecture is particularly useful when a system must provide legacy composite and S-Video connections alongside component RGB or YPrPb outputs. PCB implementation requires careful high-speed routing and controlled return paths for digital inputs and analog outputs. Place decoupling capacitors near the supply pins, keep analog output traces short and isolated from switching nodes, and use a continuous ground plane where the package and board stackup permit it. Confirm the exposed-pad connection, output load requirements, and synchronization features against the manufacturer pin-description table and application guidance. This page organizes the device's multiformat capabilities, verified specifications, application guidance, replacement constraints, and same-package comparison information into a practical engineering reference for designers evaluating legacy analog-video output requirements.

RFQ پەیوەندی
ADV7393BCPZ - 10-Bit SD/HD Video Encoder, 40-LFCSP | ADI (Tape & Reel)
ADV7393BCPZ

ADV7393BCPZ - 10-Bit SD/HD Video Encoder, 40-LFCSP | ADI (Tape & Reel)

The Analog Devices ADV7393BCPZ is a low-power, chip-scale 10-bit SD/HD video encoder that integrates three 10-bit video DACs and a digital video encoder on a single monolithic die. Housed in a 40-lead LFCSP-VQ (6x6 mm) package with exposed pad, the part supports composite (CVBS), S-Video (Y-C), and component (YPrPb/RGB) analog outputs at standard-definition and high-definition formats, operating from a single 2.7 V to 3.3 V analog and digital supply. Pricing on distributor inventories such as LCSC starts near $6.45 per unit as of October 2026. A video encoder is a data converter IC that translates digital video streams (parallel ITU-R BT.656 / BT.601, or serial HDMI-derived pixel data) into analog waveforms suitable for legacy displays, broadcast modulation, or recording onto analog media. Within the broader taxonomy it sits inside data converters (video DAC + encoder) and ultimately under interface/signal-chain ICs. The ADV7393 family targets applications that still require analog video outputs after SoC integration. Key specifications include three 2.7 V/3.3 V 10-bit video DACs, support for SD (NTSC/PAL/SECAM) and HD (720p/1080i) timing standards, a low-power sleep pin, I²C control interface, and a wide operating temperature range suitable for consumer set-top boxes, DVD/BD recorders, and video capture cards. The part is specified across -40 °C to +85 °C ambient conditions. Architecturally the device combines a digital encoder block (which inserts sync, blanking, and color modulation) with three current-steering DACs that drive the three analog outputs. Internal PLL-derived timing generation eliminates the need for an external pixel clock in many modes, simplifying board layout. The 40-LFCSP package and exposed thermal pad allow direct PCB thermal dissipation and short analog output traces, important at HD color bandwidths where trace impedance must be tightly controlled. Typical applications include set-top box encoder outputs, DVD and Blu-ray player composite/component video, video capture cards, and industrial test pattern sources. The single 3.3 V rail makes it straightforward to retrofit onto existing 3.3 V designs without adding an LDO. The companion ADV7390/91/92 family members share the same digital architecture and register map, allowing firmware reuse across the encoder line. When designing with this device, keep analog output traces matched to 75 ohm impedance with a 75 ohm termination at the load connector. Place decoupling capacitors immediately adjacent to AVDD and DVDD pins, and tie the exposed thermal pad to a clean analog ground plane. For HD formats, use the 2 x oversampling mode to ease analog filter requirements. This page consolidates distributor pricing, drop-in same-family alternatives (ADV7390/91/92), and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی