بەرهەمەکان (59)

MC145481EG - 6-Bit PCM Audio Codec | NXP | 20-SOIC
MC145481EG

MC145481EG - 6-Bit PCM Audio Codec | NXP | 20-SOIC

NXP MC145481EG is a 6-bit PCM codec and filter with one ADC and one DAC, selectable Mu-Law or A-Law companding, and a 20-pin SOIC package. The device converts between analog audio signals and PCM-coded digital streams, making it suitable for telephony, voice processing, communications, and embedded audio interfaces that require a compact companding codec. A PCM codec is an interface IC that combines an analog-to-digital converter, digital-to-analog converter, and digital signal-processing functions. The ADC samples an analog input into a digital PCM representation, while the DAC reconstructs an analog output from a digital PCM stream. Mu-Law and A-Law companding are logarithmic compression formats commonly associated with telephone speech, reducing the word length required for acceptable speech quality. The MC145481EG provides one ADC channel and one DAC channel with 6-bit digital resolution. Its pin-selectable Mu-Law or A-Law companding allows one device to support either major North American or international telephony companding convention. The 20-SOIC package is approximately 0.295 inch wide and uses a surface-mount assembly process compatible with conventional PCB manufacturing and automated inspection. Internally, the codec organizes the conversion path around analog input and output stages, digital PCM conversion, and companding logic. The filtering function is important because it limits unwanted signal components and provides the bandwidth shaping expected by the PCM audio channel. Because the converter resolution is 6 bit rather than the 16 to 24 bits commonly found in modern general-purpose audio codecs, the MC145481EG is best understood as a specialized speech and communications device rather than a high-fidelity entertainment codec. Typical uses include telephone interface circuits, pulse-code-modulation voice terminals, speech-processing equipment, and embedded systems that communicate through Mu-Law or A-Law PCM channels. Its single ADC and single DAC structure keeps channel count and external circuitry modest, while the integrated codec and filter functions reduce the need for separate conversion and filtering blocks. PCB design should preserve short analog signal paths and provide clean supply decoupling near the device. Use the manufacturer pin-description table when assigning tracks, particularly for analog supply, digital supply, clock, data, and companding-control connections. Check the device's absolute maximum ratings, recommended operating conditions, and external-component requirements before selecting bypass capacitors or terminating unused inputs. This product page organizes the verified part identity, package information, technical specifications, sourcing workflow, and design considerations for engineers evaluating the MC145481EG. The MC145481EG datasheet is the primary authority for pin assignments, timing, electrical limits, and application-specific implementation details.

RFQ پەیوەندی
MC145481SD - PCM Codec-Filter, 6-bit, 20-SSOP | NXP
MC145481SD

MC145481SD - PCM Codec-Filter, 6-bit, 20-SSOP | NXP

The NXP MC145481SD is a 3 V PCM codec-filter for digital telephony and audio interfaces, with selectable mu-law or A-law companding, 6-bit conversion, and a 20-pin SSOP package. It is designed for systems that require a compact PCM voice interface rather than a general-purpose audio codec. A PCM codec-filter is a semiconductor that converts between analog voice signals and serialized PCM data while applying digital companding. The MC145481SD belongs to the codec and filter category within interface ICs, and it can support telecom, telephony, and embedded voice-processing systems. Its serial interface reduces the number of connections required between an analog voice path and a digital processor. The MC145481SD provides a 1-channel analog-to-digital converter and 1-channel digital-to-analog converter, with a stated 6-bit conversion resolution. Pin-selectable mu-law or A-law companding allows the system to choose the compression characteristic required by the connected equipment. The device also supports multiple clock formats, including short frame sync, long frame sync, IDL, and GCI timing environments. The device operates from a 3 V supply and is offered in a 20-pin SSOP package with gull-wing leads. Its industrial temperature grade and CMOS implementation make it suitable for compact communication equipment where a simple, low-power voice codec is preferred over a higher-resolution multimedia audio device. The MC145481SD is also compatible with a family of NXP telecommunication interface products, including U-Interface transceivers, S/T-Interface transceivers, ADPCM transceivers, and other PCM-related devices. Typical uses include digital telephone handsets, voice gateways, line-card signal paths, industrial voice terminals, and legacy PCM switching equipment. Because the MC145481SD is a dedicated voice codec-filter, it should be selected when the system requires mu-law or A-law companding and a compact PCM interface. It is not intended to replace a modern stereo audio codec in applications requiring higher-resolution playback, wider bandwidth, or integrated digital audio amplifiers. For a new design, verify the clock timing, companding selection, analog levels, and pin assignments against the manufacturer datasheet before layout. In a replacement design, check that the board uses the 20-SSOP footprint and that the required timing and interface functions are unchanged. This page combines the documented MC145481SD characteristics with practical guidance for sourcing, comparison, and design integration.

RFQ پەیوەندی
MC145503P - 13-Bit Mono PCM Codec-Filter | Motorola
MC145503P

MC145503P - 13-Bit Mono PCM Codec-Filter | Motorola

Motorola MC145503P is a 13-bit mono PCM codec-filter integrated circuit designed for voice digitization, reconstruction, band limiting, and signal smoothing in PCM communication systems. It is packaged in a 16-pin through-hole dual-inline package measuring 7.62 mm wide by 19.175 mm long, with an operating temperature range of -40°C to +85°C. The device combines analog transmit and receive signal conditioning with PCM codec functions in one integrated circuit. A PCM codec-filter is a signal-chain integrated circuit that converts an analog voice waveform into a digital PCM representation and reconstructs an analog signal from PCM data. Its position in the hierarchy is PCM codec-filter → audio codec interface → interface integrated circuit → semiconductor. Within a telecommunications terminal, it normally sits between microphone or line-level audio circuitry and a digital channel-processing system, reducing the number of separate analog filters and interface components required. The MC145503P provides 13-bit PCM audio interfacing and incorporates the voice digitization and reconstruction functions required by PCM equipment. It also performs the band-limiting and smoothing functions needed to limit out-of-band energy and reduce unwanted transitions. An external precision reference may be used with this device family when tighter timing or conversion control is required. The MC145503P shares a functional relationship with the MC145500, MC145501, MC145502, MC145503, and MC145505 mono PCM codec-filter family. The MC145503 family architecture combines transmit and receive paths with an integrated codec-filter function rather than requiring separate antialiasing and reconstruction filters. The MC145505 variant retains the same 16-pin implementation approach but introduces a common data-clock arrangement covering 64 kHz to 4.1 MHz. For the MC145503P, the architecture supports external precision referencing, while clocking, supply voltage, and conversion timing must be confirmed against the manufacturer datasheet before final schematic approval. Typical uses include PCM voice terminals, telephone-interface equipment, digital audio transmission systems, voice-band processing modules, and legacy telecommunication line cards. Its integrated filtering makes it particularly relevant where a compact analog-to-digital and digital-to-analog voice path is required without a large collection of external filter stages. Because it is a legacy component, new designs should also evaluate currently supported audio interfaces when lifecycle continuity is more important than reproducing an older PCM architecture. PCB design should follow the manufacturer’s application circuit for decoupling, reference connections, analog input and output routing, and clock implementation. Keep analog and digital return paths controlled, place bypass capacitors close to their associated pins, and preserve the specified external network values. Verify signal levels against the internal operational amplifiers because improper gain distribution or insufficient common-mode range can restrict usable dynamic range even when the codec itself is operating correctly. This product page combines the manufacturer-family functional description, package and temperature information, sourcing details, and practical application guidance in one engineering-focused view. It also distinguishes a true same-package family candidate from surface-mount and PLCC variants that cannot replace the MC145503P without changing the PCB footprint.

RFQ پەیوەندی
MC145554DW - 5V PCM Codec-Filter | Motorola | Voice IC
MC145554DW

MC145554DW - 5V PCM Codec-Filter | Motorola | Voice IC

Motorola MC145554DW is a single-function PCM codec-filter integrated circuit operating from a 5 V supply in a 16-pin plastic small-outline package. It supports 13-bit PCM data, mu-law voice encoding, synchronous or asynchronous operation, and on-chip precision voltage-reference support for digital voice and communications systems. A PCM codec-filter is an interface IC that combines pulse-code-modulation voice digitization, reconstruction, band limiting, and smoothing. It belongs to the codec-filter family within the broader hierarchy of interface ICs, communications ICs, and semiconductors. In a telephone or voice-processing system, the circuit receives digital PCM information, performs the required filtering and encoding functions, and supports transmission or reproduction of voice-band signals. The MC145554DW provides a 16-terminal package, a nominal 5 V supply, and an operating-temperature range from -40°C to +85°C. These characteristics suit equipment operating from conventional 5 V logic rails. The device is identified in product documentation as an interface transceiver for serial communication, bus conversion, signal driving, receiver stages, and industrial networking applications. Its mu-law capability and 13-bit PCM interface make it most applicable to legacy digital voice and telecommunications equipment, including channel banks, voice-processing modules, terminal equipment, and PCM transmission systems. Synchronous and asynchronous operating support broadens its usefulness where the surrounding controller must accommodate different PCM clocking arrangements. An internal precision voltage reference helps establish stable operating conditions for the codec-filter functions. Because MC145554DW belongs to an older communications-controller family, engineers should verify signal timing, pin-level connectivity, clocking mode, and external filtering requirements against the Motorola datasheet before replacing a part in an operating design. The SOIC-16 footprint is easy to inspect during PCB review, but compatibility depends on matching the complete pin function and PCM timing characteristics rather than package dimensions alone. For new PCM voice designs, compare the device with newer interface solutions on power consumption, supported law and bit width, clock flexibility, and system architecture. For maintenance of existing 5 V mu-law equipment, MC145554DW can be useful when its documented electrical and timing characteristics match the original circuit. This page consolidates the device identity, package, environmental limits, and engineering guidance needed to plan sourcing and PCB review.

RFQ پەیوەندی
MC33742PEPR2 - SBC w/ CAN, 2x LDO, 4 Wake | NXP | QFN-48
MC33742PEPR2

MC33742PEPR2 - SBC w/ CAN, 2x LDO, 4 Wake | NXP | QFN-48

The NXP MC33742PEPR2 is a monolithic System Basis Chip (SBC) for automotive ECU applications, integrating a high-speed CAN interface, two 5.0 V/200 mA low-dropout regulators, four wake-up inputs, and a 15 ms reset circuit in a single 48-pin QFN-EP (7x7) package. A System Basis Chip is a category of mixed-signal automotive IC that combines multiple power, communication, and supervisory functions that previously required several discrete components around an automotive microcontroller. Within the broader hierarchy, an SBC belongs to the power management and in-vehicle networking ecosystem alongside transceivers, voltage regulators, and watchdog supervisors. By collapsing these functions into one die, the MC33742 reduces PCB area, simplifies wiring harness interfaces, and helps automakers meet stringent quiescent-current budgets for modules that must remain in a low-power state when the vehicle is parked. Key features include a fixed 5.0 V/200 mA LDO with current limit and overtemperature pre-warning, a second auxiliary 5.0 V regulator for sensor or communication supplies, four independent wake-up inputs that allow the ECU to exit Sleep mode from local events such as door-switch transitions or sensor edges, a high-speed CAN physical layer capable of 1 Mb/s operation, and a programmable reset generator with 15 ms duration. Internal protection covers thermal shutdown, watchdog timer, and battery voltage monitoring. The device uses a mixed bipolar-CMOS process with an integrated charge pump and high-side drivers to support the CAN bus recessive/dominant drive symmetry. Its Sleep mode draws a very low quiescent current, allowing body and chassis ECUs to meet the < 100 µA sleep-current targets expected by major OEMs. Compared with discrete solutions, the SBC eliminates inter-IC glue logic and improves ESD/EMC robustness because all sensitive pins are co-located on a controlled silicon substrate. Typical applications include HVAC control modules, body control modules, instrument clusters, door modules, and seat control units in 12 V automotive systems (5 V/9 V/12 V/15 V/18 V/24 V nominal battery compatibility per the datasheet). The integrated CAN interface makes it a natural fit for powertrain-adjacent and chassis nodes where HS-CAN is the dominant backbone. For design, attach the exposed thermal pad to a continuous ground copper pour with multiple thermal vias. Place the two decoupling capacitors (one per LDO) directly at their respective output pins to keep load transients within regulation. This page consolidates distributor pricing, drop-in compatible alternatives, and design guidance not bundled in the original 2004-vintage datasheet, giving procurement engineers and PCB designers a single practical reference.

RFQ پەیوەندی
NAU8811YG - 24-bit Mono Audio Codec with SPI | Nuvoton
NAU8811YG

NAU8811YG - 24-bit Mono Audio Codec with SPI | Nuvoton

The Nuvoton NAU8811YG is a cost-effective, low-power wideband mono audio codec with 24-bit I2S audio interface and SPI control, housed in a 20-pin QFN (4x4 mm) package with exposed pad. It integrates one ADC channel and one DAC channel (24-bit resolution) for voice telephony and audio recording/playback applications. An audio codec (coder-decoder) is a mixed-signal IC that converts analog audio signals to digital data and vice versa. In the system hierarchy, an audio codec sits between analog transducers (microphones, speakers, line outputs) and a digital processor such as a DSP or application MCU, providing the ADC path, DAC path, and an industry-standard digital audio bus such as I2S or PCM in a single power-management-friendly device. Key features include an Automatic Level Control (ALC) with noise gate that keeps recorded voice levels consistent without host intervention, a programmable gain amplifier (PGA) on the record path, and a differential microphone input plus a single-ended auxiliary input that can sum multiple signals. Three amplification paths with total gain of up to [DATA_NEEDED: total gain value] support flexible signal conditioning. The digital audio interface supports both I2S and PCM with time-slot assignment, easing integration with cellular basebands and Bluetooth controllers. Architecturally, the NAU8811 pairs robust sigma-delta conversion with an on-chip clocking scheme controlled over SPI, minimizing external component count. Its low-power design targets battery-operated voice terminals where every microamp matters. According to the Nuvoton NAU8811 datasheet (Rev 2.5), the device is explicitly designed for voice-telephony-related applications, with wideband performance suitable for modern voice codecs. Typical applications include hands-free car kits, VoIP headsets and speakerphones, portable voice recorders, intercom systems, and cellular accessories where one differential mic input and one mono output are sufficient. A key design consideration: because the AUX input is multipurpose and can be configured to sum multiple signals, careful gain staging across the PGA and ALC is required to avoid clipping on loud transients; set the ALC target level below the ADC full-scale range. This page synthesizes distributor stock data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
NAU8822LYG - 24-bit Stereo Audio Codec | Nuvoton | QFN-32
NAU8822LYG

NAU8822LYG - 24-bit Stereo Audio Codec | Nuvoton | QFN-32

The Nuvoton NAU8822LYG is a low-power, high-quality 24-bit stereo audio codec with integrated speaker driver, housed in a 32-pin QFN (5x5 mm) package with I2S/PCM audio interface, precision 24-bit stereo ADC and DAC conversion, and operation over -40C to +85C. An audio codec (coder-decoder) is a mixed-signal integrated circuit that converts analog audio signals to digital data and digital audio data back to analog. Within the system hierarchy, a codec sits between analog transducers such as microphones, headphones, and speakers, and a digital processing host such as an application processor, microcontroller, or FPGA. Codecs combine ADCs, DACs, microphone preamplifiers, headphone amplifiers, mixers, and volume controls in one silicon solution, making them the core building block of any embedded audio subsystem. Key features of the NAU8822LYG include precision 24-bit stereo ADC and DAC channels for high dynamic-range record and playback, an integrated speaker driver that can drive a speaker directly without an external amplifier, and a standard I2S/PCM digital audio interface for glueless connection to mainstream processors. A broad range of integrated functions - mixing, gain staging, and input/output routing - simplifies implementation of complete audio system solutions on a single chip. Architecturally, the NAU8822L family is designed as a complete audio subsystem: low-power analog front ends feed the sigma-delta converters, while flexible digital mixing and volume control operate on the audio bus side. This integration reduces component count, board area, and analog design effort compared with discrete codec-plus-amplifier chains. Typical applications include portable audio players and recorders, smartphone and tablet headset audio, hands-free speakerphone systems using the built-in speaker driver, and general-purpose embedded audio in industrial equipment. The low-power design targets battery-operated products where every milliamp matters. Design consideration: provide a clean analog supply and follow the manufacturer layout guidance for ground separation between analog and digital sections to preserve the 24-bit converters' noise performance. This page synthesizes distributor pricing (LCSC from $2.0171 as of 2026-10-11), package and interface data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
P82B96TD - Dual I2C Bus Buffer 2-15V 400kHz | NXP
P82B96TD

P82B96TD - Dual I2C Bus Buffer 2-15V 400kHz | NXP

The NXP Semiconductors P82B96TD is a dual bidirectional I2C bus buffer that creates a non-latching, bidirectional logic interface between a standard I2C-bus and bus configurations with different voltage and current levels, operating from 2 V to 15 V at up to 400 kHz in an 8-pin SOIC (SO8) package. An I2C bus buffer, also called a bus repeater or redriver, is an interface IC that sits between an I2C master and one or more slaves to isolate bus capacitance, translate logic levels, and extend cable length. Within the signal-integrity hierarchy (bus buffer -> line driver -> interface IC -> signal conditioning IC), buffers like the P82B96TD allow a small I2C segment to drive long or heavily loaded lines without violating the 400 pF bus capacitance limit of the standard I2C specification. Key features include two independent buffer channels handling both SCL and SDA, a wide supply range of 2 V to 15 V, support for 15 V bus levels and low-impedance lines, and low operating supply current of approximately 900 uA. The bipolar process is latch-up free and provides ESD protection exceeding 3500 V HBM per JESD22-A114, 250 V MM (DIP package) per JESD22-A115, and 1000 V CDM per JESD22-C101. The buffer splits each I2C signal into forward and reverse paths (Tx/Rx and Ty/Ry), using slightly different logic-low voltage levels at the Sx/Sy side to prevent latch-up without a direction-control pin. This architecture allows interfacing between standard 3.3 V or 5 V I2C logic, the 350 uA SMBus, and 15 V level systems on the same PCB. Typical applications include I2C bus extension over long cables, level shifting between 3.3 V microcontrollers and 5 V or 15 V peripherals, capacitive bus isolation for large multi-drop networks, and SMBus-to-I2C interfacing in industrial and telecom systems. Design consideration: two or more Sx or Sy pins must never be connected to the same node, as the architecture does not support this; when cascading buffers, connect Tx/Rx signals of one stage to Sx/Sy of the next. Pull-up resistor sizing must account for the offset logic-low levels at Sx/Sy. This page synthesizes distributor availability data, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
P82B96TD,112 - Dual I2C Bus Buffer 2-15V | NXP
P82B96TD,112

P82B96TD,112 - Dual I2C Bus Buffer 2-15V | NXP

The NXP P82B96TD,112 is a dual bidirectional bus buffer IC that creates a non-latching, bidirectional logic interface between the normal I2C-bus and a range of other bus configurations, housed in an 8-pin SOIC (SO8) package with a supply voltage range of 2 V to 15 V and bus speed support up to 400 kHz. A bus buffer is an interface IC that sits between an I2C-bus master or slave and the physical bus wiring, isolating bus capacitance and translating logic levels. In the power management and interface hierarchy, the P82B96 belongs to the I2C buffer and repeater family, a subset of interface ICs used to extend the length, loading, and voltage tolerance of two-wire serial buses while preserving open-drain bus semantics. Key features include interface capability between standard I2C-bus logic and buses operating at different voltage levels (for example the 350 uA SMBus, 3.3 V logic devices, and 15 V levels), low-impedance line driving for cable extension, and latch-up-free bipolar construction. ESD protection exceeds 3500 V HBM per JESD22-A114, 250 V MM (DIP package) and 400 V MM (SO package) per JESD22-A115, and 1000 V CDM per JESD22-C101. Technically, each buffer channel provides two separate signal paths: a Tx path driving the buffered bus from the I2C side and an Rx path sensing the buffered bus and pulling the I2C pin low. Because Tx and Rx are separate directional signals, they may be connected directly without causing bus latching, or used with optocouplers for galvanic isolation or with balanced twisted-pair transmission lines. Typical applications include extending I2C-bus reach across long cables, level-shifting between 3.3 V and 15 V bus domains, driving heavily loaded backplane buses, and isolating large-capacitance LED display clusters from a microcontroller I2C port. Design consideration: keep pull-up resistor values appropriate to each bus domain; the buffer does not create its own pull-up current, so each bus segment must be terminated to its own logic level. This page synthesizes distributor pricing, drop-in alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
PCM1716EG4 - 24-Bit 96kHz Stereo Audio DAC | Texas Instruments
PCM1716EG4

PCM1716EG4 - 24-Bit 96kHz Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1716EG4 is a 24-bit, 96 kHz sampling CMOS delta-sigma stereo audio digital-to-analog converter in a 28-pin SSOP package. It supports digital audio data in I2S format and is designed for mid- to high-grade digital audio applications requiring high-resolution playback and simultaneous stereo conversion. A digital-to-analog converter, or DAC, converts digital audio samples into analog voltage signals suitable for amplification and loudspeaker or headphone drive. The PCM1716 belongs to the stereo audio DAC hierarchy within interface ICs and broader data-conversion semiconductor systems. Its delta-sigma architecture supports high-resolution digital audio processing while providing a compact solution for consumer, industrial, and embedded audio equipment. Key features include 24-bit audio resolution, a maximum sampling frequency of 96 kHz, CMOS construction, and a specified THD+N of -96 dB. The device also uses I2S-compatible digital audio data and operates from a 5 V supply with a maximum current of 45 mA. These characteristics make it suitable for CD, DVD, digital audio, multimedia, and other applications requiring a stereo conversion stage close to the digital audio source. The PCM1716EG4 uses an enhanced multi-level delta-sigma DAC architecture. In a digital audio system, the incoming I2S stream is processed by the digital-to-analog conversion stage and delivered as left and right analog channels. The 28-pin SSOP package provides a conventional surface-mount footprint suitable for compact audio boards, while the specified -25 °C to 85 °C operating range supports commercial and industrial equipment designs. Typical applications include stereo CD and DVD player output stages, digital audio equipment, multimedia systems, set-top boxes, active speaker designs, and industrial audio interfaces. The 24-bit, 96 kHz capability is particularly useful when the source system supports high-resolution digital audio and the design needs a straightforward stereo analog output stage. The key design consideration is to implement the analog output network and signal routing recommended by the manufacturer datasheet. In particular, the digital interface, analog supply, ground reference, and output filtering sections should be laid out according to the datasheet guidance to preserve distortion performance and channel separation. This page combines the manufacturer device characteristics, package information, practical application guidance, and a structured comparison of documented PCM1716-family alternatives for engineers evaluating an audio DAC replacement.

RFQ پەیوەندی
PCM3001E - 18-Bit Stereo Audio Codec | Texas Instruments
PCM3001E

PCM3001E - 18-Bit Stereo Audio Codec | Texas Instruments

The Texas Instruments PCM3001E is an 18-bit stereo audio codec with two analog inputs, two analog outputs, a serial audio interface, and hardware line-output control in a 28-pin SSOP package. It combines two 18-bit ADCs, two 18-bit DACs, and a stereo line-output amplifier stage, making it suitable for compact consumer audio equipment that requires a complete analog-to-digital and digital-to-analog signal path. An audio codec is an interface IC that converts analog audio signals into digital data and converts digital audio data back into analog signals. In the broader hierarchy, a codec belongs to an audio interface IC, which is part of the interface IC and semiconductor categories. The PCM3001E integrates these conversion functions into one device, reducing the number of external converters required in consumer audio systems. The PCM3001E provides 18-bit stereo conversion, a serial interface, single-ended analog input and output capability, and hardware control for the line-output section. According to the manufacturer product page, its data format can be pin-programmed, allowing the same hardware design to support multiple serial-interface configurations. These features help simplify board design where source selection, volume control, or codec mode selection must be handled through hardware signals. Texas Instruments fabricates the PCM3000 and PCM3001 codec families using an advanced CMOS process and packages them in a compact 28-pin SSOP. The integrated conversion and output-control functions can shorten analog routing and reduce external component count, but the serial interface, clocking, grounding, and power-supply layout remain central to achieving clean audio performance. Designers should treat the analog and digital return paths as separate until they meet at the codec ground reference. Typical uses include stereo USB audio accessories, portable consumer audio products, digital audio adapters, multimedia equipment, and compact sound-card designs. A suitable external clock and properly terminated serial data path are required when the codec operates as an audio interface slave or master. The hardware-programmable interface also supports shared-bus designs in which several audio functions must share limited connector or controller pins. The primary design tradeoff is integration versus flexibility. A 28-pin SSOP reduces external converter circuitry, but the relatively fine lead pitch requires careful soldering and component placement. Place input and output decoupling close to their associated pins, maintain short analog traces, and use an uninterrupted ground plane beneath the codec. Follow the manufacturer datasheet pin-description table and application circuit when assigning every control and supply connection. This page combines the official device information, package identification, a verified direct-replacement candidate, and practical interface-selection guidance. It also distinguishes confirmed electrical facts from parameters that require design confirmation, helping engineers move from part selection to a defensible PCB implementation.

RFQ پەیوەندی
PCM3001EG - 18-Bit Stereo Audio Codec | Texas Instruments
PCM3001EG

PCM3001EG - 18-Bit Stereo Audio Codec | Texas Instruments

The Texas Instruments PCM3001EG is an 18-bit stereo audio codec with single-ended analog input and output, designed for digital audio systems that require parallel or serial digital audio interfaces. The device also provides a line output with hardware control, allowing the output stage to be managed by an external hardware signal rather than relying only on software register settings. It is packaged in a 28-pin SSOP for cost-sensitive consumer, industrial, and multimedia equipment. An audio codec is an interface IC that converts between digital audio data and analog signals. Its functional hierarchy is stereo audio codec, audio interface IC, interface IC, and integrated circuit. The PCM3001EG occupies the conversion boundary between a digital audio engine and an analog speaker or line-level signal path, combining an 18-bit stereo codec function with hardware-controlled line output in one package. The principal verified characteristics are 18-bit stereo resolution, single-ended analog inputs and outputs, a 28-pin SSOP package, and hardware-controlled line-out operation. The 18-bit data format provides more precision than common 16-bit audio systems while preserving compatibility with digital audio designs that process 18-bit samples. Single-ended analog signal paths simplify board construction by reducing the number of external input and output stages required when a balanced signal path is unnecessary. The hardware line-output control is useful in systems where analog output muting or operating state must respond quickly to external hardware events. Designers can use that control for source selection, muting, or mode changes without relying entirely on a software driver. System-level timing, clocking, and supported digital interface formats should be confirmed in the manufacturer datasheet before the codec is placed into a new design. Typical applications include consumer audio equipment, multimedia decoding boards, portable media systems, sound-effect generators, and industrial audio panels. The 28-pin SSOP footprint also supports legacy-style through-hole assembly processes where a fine-pitch BGA or QFN would be unsuitable. Because the analog path is single-ended, grounding and trace layout become especially important for preventing analog noise from coupling into the digital interface. When designing around the PCM3001EG, reserve filtering and impedance-matching networks for each analog input and output, and keep the analog traces short and shielded from clock and data lines. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks and checking the relationship between the digital interface pins, analog pins, power rails, and hardware control inputs. This page combines the confirmed device characteristics with practical integration guidance and sourcing information.

RFQ پەیوەندی
PCM3008T - 16-Bit Stereo Audio Codec | Texas Instruments
PCM3008T

PCM3008T - 16-Bit Stereo Audio Codec | Texas Instruments

Texas Instruments PCM3008T is a low-power, low-voltage 16-bit stereo audio codec with single-ended analog inputs and outputs, 16-bit serial audio interfacing, and a 16-TSSOP package. Its converters use delta-sigma modulation with 64-times oversampling, while hardware line-out control supports direct management of the stereo output path. An audio codec is an interface IC that converts signals between the analog and digital domains. The PCM3008T integrates two analog-to-digital converters and two digital-to-analog converters, placing a complete stereo capture and playback path into one device. Its digital architecture connects these converters to an audio data interface while providing filtering and signal-conditioning functions required for practical audio systems. The ADC path uses 64-times oversampling followed by a digital decimation filter and digital high-pass filter. These functions reduce out-of-band components and remove low-frequency DC content from captured audio. The DAC path includes an 8-times oversampling digital interpolation filter, a digital de-emphasis filter, and pop-noise-free muting. The 16-bit resolution supports CD-audio-compatible data widths, while the single-ended interface reduces the external component count of analog input and output circuitry. The converter architecture trades a conventional high-rate multi-bit conversion approach for delta-sigma modulation. The manufacturer datasheet describes the DAC signal path as an 8-times oversampling interpolation stage followed by conversion to 64-times oversampling and one-bit delta-sigma modulation. This integrated filtering architecture provides a compact stereo codec without requiring separate converter and reconstruction circuitry. Typical uses include consumer stereo audio playback, digital recording equipment, communications terminals, industrial audio interfaces, and embedded audio systems. The single-ended analog topology is particularly useful when the signal source and destination use single-ended ground-referenced connections. A separate clock and digital interface remain necessary because the codec is not a self-contained USB or network audio controller. Design the analog and digital sections with attention to grounding and return paths. Place input and output filtering components close to their associated pins, keep switching supplies and high-current digital traces away from the analog inputs, and follow the manufacturer pin-description and application guidance for bypass capacitors, clocking, and audio interface configuration. This page combines the PCM3008T converter architecture, interface details, verified ordering information, and practical design guidance with a direct comparison against its documented orderable equivalent. It is intended to help engineers confirm package compatibility, select an appropriate audio architecture, and plan analog, digital, and power-layout decisions before schematic release.

RFQ پەیوەندی
SI3209-B-FM - 2-Channel Telecom Interface IC | Skyworks
SI3209-B-FM

SI3209-B-FM - 2-Channel Telecom Interface IC | Skyworks

The Skyworks SI3209-B-FM is a 2-channel PCM telecom interface IC designed for linefeed-interface applications in telephone access equipment. The device is associated with the Si3226/Si3227 linefeed-interface family, operates from a 135 V-class telecom supply, and is available in a lead-free surface-mount package. Its two-channel architecture helps reduce the component count and board area required for dual-channel line-card designs. A PCM interface IC is a type of integrated telecommunications interface circuit that connects voice-processing equipment to external linefeed circuitry. In the broader hierarchy, it belongs to the interface-IC category, then to communication and telecom interface devices, and ultimately to the semiconductor family. The SI3209-B-FM is intended for systems requiring a compact, lead-free interface solution rather than a general-purpose logic device. The primary features of the SI3209-B-FM include two interface circuits, PCM signal support, operation in the 135 V-class linefeed environment, and a lead-free package. These characteristics make it relevant to central-office equipment, subscriber-line equipment, voice gateways, and other telecom products that connect digital PCM streams to analog line interfaces. The two-circuit count allows one device to serve two line channels when the surrounding linefeed network and protection design are appropriate. The SI3209-B-FM is associated with the Si3226/Si3227 linefeed-interface family, positioning it as a telecom-specific component rather than a general-purpose communications transceiver. Its operating voltage rating and PCM interface are the primary technical constraints for board-level compatibility. Designers should also verify the exact linefeed architecture, external component requirements, package details, and absolute maximum ratings against the manufacturer datasheet before releasing a production design. Typical applications include digital loop carriers, voice-over-packet gateways, central-office line cards, subscriber access equipment, and other telecom systems that require a dual-channel PCM linefeed interface. In these systems, the SI3209-B-FM can sit between a digital voice-processing section and the linefeed circuitry, reducing channel count and helping standardize the board layout. A key design consideration is that the 135 V-class operating environment requires careful review of linefeed protection, surge handling, creepage, clearance, and component spacing around the device. The manufacturer datasheet should be used to determine the required external components, thermal conditions, and pin-level connectivity. This page combines the identified technical characteristics, sourcing information, and practical design guidance for engineers evaluating the SI3209-B-FM. The key selection criteria are the number of PCM channels, telecom supply environment, package compatibility, protection requirements, and long-term product availability. Because the SI3209-B-FM is a specialized telecom interface IC, it is most appropriate when the surrounding linefeed design already targets the Si3226/Si3227-class architecture rather than a generic isolated communication interface.

RFQ پەیوەندی
SI8241BB-B-IS1R - Isolated Class-D Audio Driver | Silicon Labs
SI8241BB-B-IS1R

SI8241BB-B-IS1R - Isolated Class-D Audio Driver | Silicon Labs

The Silicon Labs SI8241BB-B-IS1R is a two-channel isolated Class-D audio driver operating from a 4.5 V to 5.5 V supply in a 16-pin SOIC package rated for -40°C to +125°C. The device uses PWM input, includes a high-precision linear programmable dead-time generator, provides 1 µs latchup immunity, and is specified for isolated audio power-stage drive. It is packaged in a 3.90 mm wide SOIC-16 outline identified as MS-012AC. An isolated gate driver is an interface and power-management semiconductor that transfers control signals while maintaining galvanic isolation between a logic-side controller and a high-voltage or high-power audio stage. The Si8241 family targets Class-D amplification, where MOSFET switching drives loudspeaker transducers efficiently. Isolation reduces common-mode coupling and ground-loop risk between the controller and power converter, while the programmable dead-time function helps control transition overlap and audio distortion. Key verified characteristics include a 4.5 V to 5.5 V supply range, two driver channels, PWM input, high latchup immunity of 1 µs, and an operating temperature range of -40°C to 125°C. The manufacturer product information identifies the device as an audio gate driver for high-fidelity Class-D amplification, emphasizing precise dead-time adjustment as a way to balance total harmonic distortion and system efficiency. The part is associated with isolated-driver functionality rather than a conventional line-level audio output stage. Its isolation barrier and driver outputs are intended for a power MOSFET stage whose voltage and current exceed ordinary logic-device ratings. Because the verified excerpts do not provide complete timing, output-current, propagation-delay, isolation-voltage, or truth-table values, those specifications remain marked as data needed rather than inferred. Typical application contexts include isolated Class-D audio amplifiers, full-bridge and half-bridge speaker power stages, industrial audio equipment, consumer-audio modules, and systems where the controller must remain separated from the switching node. The PWM interface makes it suitable for audio-control architectures that already generate a differential bridge command. Designers should verify the complete datasheet pinout, isolation ratings, dead-time programming method, recommended external components, and MOSFET compatibility before layout. In particular, keep the isolation barrier free of copper and maintain the manufacturer-specified creepage and clearance requirements; do not treat the SOIC outline alone as proof of a complete replacement. This page consolidates verified manufacturer and distributor information, separates known electrical facts from missing parameters, and provides application and sourcing guidance that can be checked against the original datasheet before design release.

RFQ پەیوەندی
TCAN1051GVDRQ1 - 5Mbps CAN FD Transceiver AEC-Q100 | TI
TCAN1051GVDRQ1

TCAN1051GVDRQ1 - 5Mbps CAN FD Transceiver AEC-Q100 | TI

The Texas Instruments TCAN1051GVDRQ1 is an automotive fault-protected CAN transceiver with flexible data-rate (CAN FD) support up to 5 Mbps, operating from a 4.5 V to 5.5 V supply and housed in an 8-pin SOIC (D) package rated from -55C to +125C. A CAN (Controller Area Network) transceiver is a physical-layer interface IC that converts the logic-level TXD and RXD signals of a CAN controller into the differential CANH/CANL bus signals. Within the power-management and interface hierarchy, the transceiver sits between the host microcontroller and the twisted-pair bus, defining bus timing, fault tolerance, and ESD robustness. CAN FD (Flexible Data-rate) extends classical CAN by allowing faster bit rates during the data phase, which this device supports at up to 5 Mbps. Key features include AEC-Q100 automotive qualification, flexible data-rate operation, integrated fault protection on the CANH/CANL bus pins, and a separate VIO pin that lets the I/O side interface with 3.3 V or 5 V microcontrollers while the transceiver core runs at 5 V. The GV variant designation indicates the VIO-capable version without standby/sleep mode, simplifying designs that do not require low-power bus monitoring. Technically, the device integrates dominant/short-circuit protection, bus fault detection, and thermal shutdown behavior typical of TI's TCAN1051 family, protecting the transceiver against wiring faults to battery, ground, or other bus lines. The differential receiver architecture maintains receiver timing margins over the full -55C to +125C automotive temperature range, and the SOIC-8 footprint simplifies layout with the standard CAN transceiver pin ordering (TXD, GND, VCC, RXD, VIO, CANL, CANH). Typical applications include automotive body control modules, gateways, electric powertrain and battery management nodes, and industrial CAN networks where the 5 Mbps CAN FD data phase shortens frame transmission times versus classical 500 kbps CAN. Design consideration: keep the stub length from transceiver to bus connector short and use a split-termination network (typically two 60-ohm resistors with a capacitor to ground) for best EMC performance; never omit the 100 nF decoupling capacitor close to VCC. This page synthesizes distributor pricing from DigiKey, Mouser, LCSC and Octopart, same-package drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
TCAN1051HGVDRQ1 - 5Mbps CAN FD Transceiver AEC-Q100 | TI
TCAN1051HGVDRQ1

TCAN1051HGVDRQ1 - 5Mbps CAN FD Transceiver AEC-Q100 | TI

The Texas Instruments TCAN1051HGVDRQ1 is an automotive fault-protected CAN flexible data-rate (CAN FD) transceiver supporting data rates up to 5 Mbps, supplied at 4.5 V to 5.5 V, housed in an 8-pin SOIC (D) package rated for -55C to +125C operation. A CAN FD transceiver is a physical-layer interface IC that converts the TTL-level transmit (TXD) and receive (RXD) signals of a CAN controller into the differential CANH/CANL bus signals, and vice versa. Within the signal-chain hierarchy, it sits between the host microcontroller or CAN controller and the twisted-pair bus, defining the robustness, bus-fault tolerance, and data-rate ceiling of the entire network node. Key features of the TCAN1051HGVDRQ1 include CAN FD support up to 5 Mbps for fast arbitration-free data phases, automotive AEC-Q100 qualification, fault-protected bus pins that survive electrical faults on CANH and CANL, and a standby mode with bus-wake capability for low quiescent power. The VIO pin allows I/O-level adaptation to 3.3 V controllers, and the device provides dominant-timeout protection and thermal shutdown for system-level robustness. Technically, the transceiver drives a differential bus compliant with high-speed CAN physical-layer requirements while adding fault protection that distinguishes the HGV variant: bus pins tolerate sustained overvoltage and short-circuit events that would destroy a standard transceiver. An internal receiver filters and shapes the bus signal, and the STB pin (pin 8) selects operating modes, enabling standby operation with wake-up via bus activity. Typical applications include automotive body control modules, gateways, and powertrain nodes; industrial CANopen networks requiring fault tolerance; and battery management systems where bus wiring faults are credible failure modes. High CAN FD data rates make the part suitable for modern zonal architectures. Design consideration: local bus termination and placement of 100 nF to 470 nF VCC decoupling directly at pin 3 strongly influence signal integrity at 5 Mbps; keep the TXD/RXD traces short and reference them to a clean ground. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
UJA1023T/2R04,512 - LIN 2.0 I/O Slave, 16-SO | NXP
UJA1023T-2R04512

UJA1023T/2R04,512 - LIN 2.0 I/O Slave, 16-SO | NXP

The NXP UJA1023T/2R04,512 is a stand-alone Local Interconnect Network (LIN) I/O slave that integrates a LIN 2.0/SAE J2602-compliant transceiver, a 30 kΩ slave termination resistor, an 8-bit SPI-configurable I/O expander, and high-side/low-side drivers in a 16-pin SOIC (SOT162-1) package. It targets electronic control units (ECUs) in body, comfort, and powertrain automotive sub-networks where a microcontroller needs to read switches and drive relays, lamps, or LED arrays without dedicating GPIO pins or a separate LIN transceiver. A LIN I/O slave (or LIN follower) is a node on a single-wire LIN bus that does not arbitrate the master role but answers polling frames from a LIN master ECU. The UJA1023 transparently sits between the LIN bus and the host MCU, decoding incoming LIN 2.0 frames and converting them into SPI read/writes; outgoing SPI commands drive the integrated high-side outputs and low-side outputs. Compared to discrete solutions (a standalone LIN transceiver plus a separate I/O expander plus discrete FET drivers), the UJA1023 reduces PCB area, BOM count, quiescent current, and software complexity for automotive ECUs that are LIN-attached slaves. Key features include LIN 2.0 and SAE J2602 compliance with LIN 1.3 backward compatibility, integrated 30 kΩ LIN termination, an SPI host interface with selectable SPI mode 0 or 3 up to 2 Mbit/s, configurable high-side and low-side output channels for relay and LED drive, cyclic and event-driven interrupt signalling, and a wide 6.5 V to 27 V battery supply range with 40 V load-dump survival. The 16-pin SOIC package is footprint-compatible with industry-standard 16-SOIC discrete LIN implementations and supports -40 °C to +125 °C automotive temperature grade. The UJA1023T/2R04,512 is widely used in automotive body and comfort ECUs such as seat-control modules, mirror adjusters, HVAC flap drivers, headlamp levellers, window-lift switch panels, and ambient lighting nodes. It is also used in roof modules, door modules, steering-column switch clusters, and LED daytime running light controllers where LIN-attached sub-modules offload switch scanning and actuator drive from the main MCU. When designing with the UJA1023T/2R04,512, ensure the local ECU power-rail decoupling follows NXP's reference design with a 100 nF ceramic plus a reverse-biased blocking diode on VBAT. Tie unused high-side and low-side output pins to GND through a 10 kΩ resistor or leave open per datasheet guidance, and verify SPI mode and clock polarity against the host MCU's configuration during bring-up.

RFQ پەیوەندی
WAU8812YG - Mono Audio Codec + Speaker Driver | Nuvoton
WAU8812YG

WAU8812YG - Mono Audio Codec + Speaker Driver | Nuvoton

The Nuvoton WAU8812YG is a mono audio codec with integrated speaker driver, housed in a 32-pin QFN-EP (5x5 mm) package. It features one ADC and one DAC channel with typical signal-to-noise ratios of 91 dB (ADC) and 93 dB (DAC), and communicates over a serial audio data interface. An audio codec (coder-decoder) is an integrated circuit that converts analog audio signals to digital form via an ADC and converts digital audio back to analog via a DAC, while providing auxiliary functions such as microphone biasing, volume control, mixing, and in this case a built-in class speaker driver. Codecs sit between analog transducers (microphones, speakers) and digital processors such as MCUs or SoCs in the embedded audio signal chain, typically interfacing through an I2S-style serial port and a control bus for register configuration. The defining feature of the WAU8812YG is its integrated speaker driver: unlike a bare codec that requires an external amplifier stage, this device can drive a speaker directly, reducing BOM count, board area, and design effort in cost-sensitive voice applications. The 91/93 dB S/N ratio provides adequate fidelity for speech-band and compact audio playback. Architecturally, the part combines a sigma-delta-style conversion path with on-chip gain stages and mixing, configurable through serial control registers. The exposed-pad 32-QFN package improves thermal dissipation for the speaker driver stage and supports compact surface-mount layouts. Typical applications include doorbell and intercom voice units, IP phone and handset audio, smart-home voice terminals, alarm and announcement systems, and portable voice-recording devices where a single mono channel with direct speaker drive suffices. A key design consideration is thermal management: driving a speaker continuously at high output power increases die temperature, so PCB copper connected to the exposed pad should be sized according to the driver output level. Series ferrite beads on speaker lines reduce EMI radiated from switching drive currents. This page adds distributor-verified availability, alternatives context, application guidance, and design notes that go beyond the raw Nuvoton datasheet content.

RFQ پەیوەندی
WM8351CGEB/RV - Stereo Audio Codec | Cirrus Logic
WM8351CGEB/RV

WM8351CGEB/RV - Stereo Audio Codec | Cirrus Logic

The Cirrus Logic WM8351CGEB/RV is a stereo audio codec with integrated power management, supporting 48 kHz audio processing, 12-bit conversion, two ADCs, and two DACs. It is supplied in a 129-ball FBGA package measuring 7 mm by 7 mm. The device is intended for compact embedded systems where audio conversion, headphone or speaker amplification, and multiple regulated power rails are required in one package. An audio codec is an interface integrated circuit that converts digital audio data into an analog signal and converts analog audio back into digital data. The WM8351 belongs to the broader hierarchy of audio interface ICs, mixed-signal semiconductors, and embedded power-management devices. Integrating codec and power-management functions can reduce the number of separate components required around an application processor while centralizing analog routing and supply sequencing. The WM8351CGEB/RV supports sampling rates up to 48 kHz and uses sigma-delta conversion for its two ADC and two DAC channels. The manufacturer specification lists a typical signal-to-noise ratio of 95 dB for both the ADC and DAC paths. Its analog supply range is 2.5 V to 3.6 V, while its digital supply range is 1.71 V to 3.6 V, allowing digital-interface and analog-circuit rails to be adjusted independently within their specified limits. Integrated power management is a major architectural feature of this codec. It allows an embedded audio system to consolidate analog, digital, and amplifier-related supply functions under the control of one audio subsystem IC. The result can be a smaller board footprint and a more structured power-up sequence than a design using several unrelated regulators. Designers should still account for startup timing, supply ramp behavior, and load transients when planning the system power architecture. Typical uses include portable media players, smart-home audio endpoints, communication equipment, industrial control panels, and other embedded platforms requiring stereo playback and record capability. The 12-bit converters and 48 kHz maximum rate are appropriate for general-purpose voice and music pathways, although the manufacturer's datasheet should be consulted for application-specific signal quality, clocking, and filter requirements. Layout is critical because the WM8351CGEB/RV combines a 129-ball FBGA with sensitive analog and digital circuitry. Place decoupling capacitors close to the associated supply balls, keep analog and digital return paths separate until their planned grounding point, and follow the package-specific ball map for exposed-pad and thermal connections. This page combines package, conversion, supply, sourcing, and drop-in replacement information for faster engineering review.

RFQ پەیوەندی
WM8595GEFL/V - Audio Codec Transceiver | Cirrus Logic
WM8595GEFL/V

WM8595GEFL/V - Audio Codec Transceiver | Cirrus Logic

The Cirrus Logic WM8595GEFL/V is a mixed-signal audio codec transceiver packaged in a 48-pin QFN configuration. It belongs to the Wolfson audio-processing product line and is designed for equipment that converts between digital audio data and analog audio signals. Its 48-QFN package supports dense integration of audio conversion, digital interface, analog signal-path, and control functions on compact circuit boards. An audio codec is an interface IC that bridges digital audio systems and analog transducers such as microphones, headphones, speakers, and line-level equipment. The broader hierarchy is audio codec → audio interface IC → mixed-signal semiconductor → interface IC. This distinction matters because an audio transceiver can support signal conversion and device control while requiring careful treatment of analog grounding, clocking, power sequencing, and digital data routing. The WM8595GEFL/V is identified as an audio codec transceiver and is associated with the WM8595 family of Cirrus Logic, formerly Wolfson, audio devices. Its principal engineering benefit is integration: multiple audio functions can be consolidated into one compact mixed-signal IC instead of requiring separate converters, interface devices, and discrete control components. This can reduce board area and simplify firmware control of the audio subsystem. The 48-pin QFN package requires careful PCB layout because its exposed thermal pad must connect to a low-impedance ground plane for both electrical return-path performance and heat removal. Digital audio traces should remain separated from sensitive analog inputs where practical, while power, ground, and clock connections should follow the pin-description and layout guidance in the manufacturer datasheet. Typical applications include multifunction audio endpoints, consumer audiovisual equipment, communications systems, and embedded products requiring an integrated codec with analog audio connections. The same part number can appear in different orderable variants, so designers should preserve the exact WM8595GEFL/V suffix when checking package, temperature, and production configuration. Before layout begins, use the manufacturer pin-description table to assign every power, ground, analog, digital, and control connection. Validate the supported audio format, sample rate, clock topology, and analog external components against the product datasheet rather than inferring them from the generic codec category. This page combines the exact WM8595GEFL/V identity, package classification, sourcing context, application guidance, and drop-in replacement assessment to support faster component selection and PCB design. It also separates verified alternatives from options that would require a different footprint or functional redesign.

RFQ پەیوەندی
WM8731CSEFL/R - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8731CSEFL/R

WM8731CSEFL/R - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8731CSEFL/R is a 24-bit serial stereo audio codec with an integrated headphone driver, offered in a 28-QFN package measuring 5 mm by 5 mm. It supports a 2.7 V to 3.6 V analog supply range and combines two audio input channels, digital audio conversion, and headphone output in one surface-mount device. The family is designed for portable equipment and other systems requiring a compact host-controlled audio interface. A stereo audio codec is a mixed-signal interface IC that converts analog microphone or line-level signals into digital PCM audio and reconstructs digital audio into an analog headphone output. In the product hierarchy, the WM8731 belongs to the audio codec class, interface IC family, and power-management-adjacent signal-chain category. Its integrated headphone driver reduces the need for separate output amplification in portable audio products. The WM8731CSEFL/R provides 24-bit conversion resolution, a 24-bit serial interface, programmable sample-rate operation, and a 28-QFN 5 mm by 5 mm package. The 2.7 V minimum operating voltage suits low-voltage portable systems, while the 3.6 V maximum operating voltage defines the upper end of its specified analog supply range. Programmable sampling enables the host processor to select the digital audio rate required by its playback or recording path. This codec architecture places microphone or stereo line inputs, sigma-delta conversion stages, digital filtering, volume control, and headphone-drive functions into a single package. Digital control is performed through a serial interface, allowing a host processor to configure conversion, playback, and input parameters. The 28-QFN footprint is compact, but its exposed thermal and electrical requirements must be handled with careful PCB layout and stable supply bypassing. Typical uses include portable Internet audio devices, digital music players, portable recorders, communications equipment, and compact embedded audio systems. In a portable player, the codec can accept line or microphone inputs and drive stereo headphones while the host exchanges PCM audio over the serial bus. In a recording product, the same device can support stereo capture and headphone monitoring while avoiding a separate monitor-output converter. Place the device close to the analog audio connectors and keep digital return paths away from microphone and line inputs. Follow the manufacturer datasheet for decoupling, exposed-pad connection, analog grounding, and supported interface modes. Correct layout is particularly important because mixed-signal codecs combine high-gain analog inputs with fast serial control and clock signals on the same compact package. This product page consolidates the exact orderable MPN, package information, interface classification, supply limits, and verified replacement findings. It also provides application guidance, comparison fields, and design cautions that help engineers evaluate the codec before beginning schematic capture, PCB layout, or firmware integration.

RFQ پەیوەندی
WM8731SEDS/RV - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8731SEDS/RV

WM8731SEDS/RV - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8731SEDS/RV is a 24-bit serial stereo audio codec with an integrated headphone driver, supplied in a 28-pin SSOP package. The device operates from a 2.7 V to 3.6 V supply, supports an industrial temperature range of -40°C to +85°C, and is identified as a surface-mount RoHS-compliant component. An audio codec is an interface IC that converts digital audio data into an analog audio signal and converts analog audio into a digital stream. In the product hierarchy, the WM8731 belongs to audio codecs, interface ICs, and broader semiconductor signal-processing devices. Its integrated headphone-driver capability combines digital-to-analog and analog-to-digital conversion with headphone-output support in one package. The WM8731SEDS/RV is listed as a 24-bit serial audio interface in a 28-pin SSOP package. The 208 mil package designation is a mechanical body-width classification, while the 28-pin arrangement provides the physical interface for power, digital audio, analog audio, microphone, and headphone-related functions. The 2.7 V to 3.6 V operating range is appropriate for compact, low-voltage digital audio systems. Its 24-bit resolution is the principal data-format characteristic identified in the manufacturer listings. Digital audio systems use this resolution to represent each sample across a defined numerical range, while the serial interface transfers encoded audio between the codec and a host controller. Integrated headphone drive reduces the number of separate external output-path components when the supported output topology is appropriate for the design. Typical design roles include portable media players, digital audio consoles, headset interfaces, and embedded systems that require one IC to handle stereo playback and recording. The industrial -40°C to +85°C temperature range supports operation across industrial and commercial ambient conditions, although individual subsystem requirements must still be checked. Designers should use the pin-description table and reference application circuit in the Cirrus Logic manufacturer datasheet when assigning SSOP-28 routes, selecting bypass capacitors, and connecting analog and digital grounds. The 2.7 V minimum and 3.6 V maximum supply limits should be enforced across supply tolerance, startup, and load-transient conditions. This page organizes the exact WM8731SEDS/RV ordering code with package, environmental, sourcing, replacement, and application guidance. It also distinguishes the verified orderable variant from unavailable cross-brand equivalents, helping engineers make a footprint-compatible decision without confusing similar codec functions with true drop-in interchangeability.

RFQ پەیوەندی
WM8778SEDS/RV - 24-Bit 192kHz Stereo Audio Codec
WM8778SEDS/RV

WM8778SEDS/RV - 24-Bit 192kHz Stereo Audio Codec

Cirrus Logic WM8778SEDS/RV is a 24-bit, 192kHz stereo audio codec with one integrated ADC and one integrated DAC, packaged in a 28-pin SSOP measuring 5.30 mm wide. The device converts digital PCM audio into analog stereo output and accepts analog stereo input for conversion into digital PCM data. An audio codec is a mixed-signal interface IC that combines converter functions with the digital audio interface required by a host processor. The WM8778SEDS/RV belongs to the audio codec hierarchy: audio interface IC, mixed-signal semiconductor, and signal-processing component. This integration allows an audio subsystem to share one physical codec for playback capture, surround-sound processing, home audio equipment, and audiovisual systems. Its headline characteristics are 24-bit resolution, operation up to 192kHz, stereo conversion capability, and a 28-pin surface-mount SSOP package. The manufacturer describes the WM8778 as a high-performance stereo codec intended for surround-sound processing applications including home hi-fi, DVD-RW equipment, and other audiovisual products. The exact input and output signal interface details, clock architecture, and control requirements should be confirmed against the manufacturer datasheet before a PCB is released. Technically, the WM8778 combines an analog-to-digital conversion path with a digital-to-analog conversion path while operating as part of a broader digital audio signal chain. Its 192kHz capability supports high-resolution audio processing, while 24-bit conversion preserves substantially more amplitude detail than conventional consumer CD-era formats. Stereo integration reduces the number of separate converter packages required in a two-channel audio design. Typical applications include home theater and surround-sound processing, DVD-RW and other audiovisual equipment, hi-fi audio, and digital recording products. In these systems, the codec receives or produces PCM audio while an external processor handles decoding, mixing, volume management, and system-level routing. The codec should be paired with suitable clocking, analog filtering, power-supply decoupling, and output-buffer circuitry appropriate to the selected sample rate and channel configuration. A critical design step is preserving the integrity of the mixed-signal interfaces. Keep analog input and output routing away from high-speed digital clock and serial-data traces, use a continuous ground-plane reference, and decouple each supply rail close to its pins. Confirm the supported audio format, master-clock ratio, digital interface voltage, and analog biasing requirements in the manufacturer datasheet before finalizing component values. This product page combines the WM8778SEDS/RV conversion specifications, package details, application guidance, ordering information, and verified sourcing links. It also provides a practical comparison framework and identifies the absence of confirmed pin-compatible replacements without treating merely similar codecs as drop-in substitutes.

RFQ پەیوەندی