بەرهەمەکان (59)

ADG1436YCPZ-500RL7 - 2Ohm Dual SPDT iCMOS Switch | Analog Devices
ADG1436YCPZ-500RL7

ADG1436YCPZ-500RL7 - 2Ohm Dual SPDT iCMOS Switch | Analog Devices

The Analog Devices ADG1436YCPZ-500RL7 is a 2 ohm max on-resistance dual SPDT (single-pole double-throw) analog switch manufactured on the iCMOS process, fully specified at +12 V, +/-15 V, and +/-5 V supplies and housed in a 16-lead LFCSP (QFN) package measuring 4 mm x 4 mm. The -500RL7 suffix denotes the automotive temperature grade with tape-and-reel packaging. An analog switch is an electronic component that routes or gates analog signals by opening and closing MOSFET conduction paths under digital logic control. Within the signal-chain hierarchy, switches sit alongside multiplexers and demultiplexers as building blocks of analog signal routing, feeding signal conditioners, ADCs, and instrumentation front ends. Switches such as the ADG1436 form the interface layer between mixed-signal controllers and the analog world. Key features of the ADG1436 include a maximum on-resistance of 2 ohm, 0.1 ohm on-resistance match between channels, 0.5 ohm max on-resistance flatness, and continuous current per channel of up to 400 mA in the LFCSP package (260 mA in the TSSOP variant). The device operates over a 33 V supply range and requires no VL logic supply - 3 V logic-compatible inputs work directly, simplifying interfacing with low-voltage controllers in high-voltage systems. The iCMOS process technology combines high-voltage CMOS with submicron geometry, enabling rail-to-rail switching operation with high-voltage supplies while keeping quiescent power very low. Each of the two independently selectable SPDT switches is controlled by its own IN logic pin, and on the LFCSP package an EN input disables all channels when asserted, reducing power consumption in idle states. Typical applications cited in the manufacturer datasheet include automatic test equipment, data acquisition systems, sample-and-hold circuits, audio signal routing, communication systems, relay replacement, and battery-powered systems. When designing with this part, account for on-resistance in series with the signal path: at 400 mA continuous current, a 2 ohm switch dissipates roughly 0.32 W, so PCB copper around the LFCSP leads matters. Keep the EN pin logic levels within the 3 V-compatible input threshold range for reliable channel selection. This page synthesizes drop-in alternatives, distributor sourcing context, and practical design notes not found in the manufacturer datasheet, providing engineers a single citable reference for the ADG1436YCPZ-500RL7.

RFQ پەیوەندی
AK4103AVF 192kHz 24-Bit Audio Transmitter | AKM
AK4103AVF

AK4103AVF 192kHz 24-Bit Audio Transmitter | AKM

The Asahi Kasei Microdevices AK4103AVF is a two-channel audio transmitter IC for digital audio signal transmission, featuring a 24-bit DIT interface and operation up to 192 kHz in a 24-VSOP package. The part is designed for professional audio, broadcast, communications, and digital audio equipment where a high-resolution stereo audio source must be serialized into a digital transmission format. Its 24-bit resolution supports detailed digital audio conversion, while the 192 kHz sampling capability supports high-rate audio paths. An audio transmitter IC converts parallel or internally formatted audio data into a serial digital stream for transmission between audio devices, converters, routers, and digital mixing equipment. Within the signal chain, it belongs to the digital audio interface category and supports the broader hierarchy of audio codec, interface IC, and semiconductor. The AK4103AVF is particularly relevant when an audio system requires a dedicated two-channel digital transmission stage rather than a general-purpose transceiver. The principal identifiable features are two audio channels, 24-bit resolution, and a maximum sampling frequency of 192 kHz. The 24-VSOP package supports surface-mount PCB assembly and is identified in distributor documentation as a 24-LSSOP-compatible package. The exact interface voltage, clocking requirements, channel format, power-supply range, and control-register organization should be confirmed against the manufacturer datasheet before a new design is released. AK4103AVF is positioned for applications requiring high-resolution stereo audio transport, including digital mixing equipment, broadcast consoles, professional audio interfaces, studio signal routing, and embedded audio transmission subsystems. The device can be used where the transmitter must preserve 24-bit word length while supporting high-rate sampling. System designers should ensure that the surrounding converter, serializer, receiver, and clock architecture match the transmitter's required digital format. The most important design consideration is interface verification. Because the AK4103AVF is a dedicated audio transmitter, its data timing, master/slave mode, word-length setting, clock polarity, and power requirements determine compatibility with the rest of the signal chain. Review the pin-description and timing diagrams in the manufacturer datasheet before assigning PCB tracks or connecting source equipment. This page provides practical application guidance, interface-oriented design notes, verified distributor references, and structured technical context for engineers evaluating AK4103AVF in high-resolution stereo audio systems.

RFQ پەیوەندی
AK4118AEQ - 192kHz 24-Bit 8-Channel Audio Transceiver | AKM
AK4118AEQ

AK4118AEQ - 192kHz 24-Bit 8-Channel Audio Transceiver | AKM

The Asahi Kasei Microdevices AK4118AEQ is a digital audio interface transceiver supporting 192kHz, 24-bit audio across eight channels, with two transmitter outputs and seven receiver inputs, in a 48-LQFP 7x7 mm package. It handles both consumer and professional channel-status formats and can automatically identify a non-PCM bitstream. A digital audio transceiver is an interface IC that converts between digital audio streams and their electrical interface requirements while recovering clock, data, and channel-status information. In the audio-signal hierarchy, the AK4118AEQ sits between source or codec circuitry and a digital audio bus, where it supports receiver, transmitter, or bidirectional digital audio paths. Its eight GPIO pins provide additional control or general-purpose interface functions. Key features include operation up to 192kHz with 24-bit word length, support for consumer and professional channel-status decoding, automatic non-PCM detection, and dedicated-pin or serial microprocessor control of operating modes. The device can operate as a two-transmitter, seven-receiver audio interface, allowing one device to bridge several digital audio connections. Its 48-LQFP package provides 48 external leads for the parallel, serial, clock, data, status, and control functions. The AK4118A architecture separates transmit and receive channel handling while adding register-based configuration, GPIO, and channel-status support. Automatic non-PCM detection is especially useful when equipment must identify compressed or non-linear PCM streams reliably. Together with the AK4626A or AK4628A multichannel codec, the AK4118A can form an AC-3-capable signal chain, as identified in the manufacturer datasheet. Typical applications include professional digital audio equipment, multichannel recording systems, broadcast and studio converters, consumer surround systems, optical-disc receivers, and interface boards that require bidirectional digital audio connectivity. The seven receiver channels are particularly useful for accepting multiple digital sources, while the two transmitter channels support routing decoded or received audio onward to another processor. PCB design should preserve short, impedance-controlled connections for digital audio signals and place support components close to their associated pins. Follow the manufacturer pin-description table when assigning tracks, especially for clock, data, mode-control, and serial-control signals. Confirm interface levels, supported electrical standards, and input/output routing in the datasheet before finalizing a multi-channel audio board. This product page combines the manufacturer's key interface capabilities, a function-focused comparison with known digital-audio alternatives, and practical implementation guidance. It helps engineers identify whether the AK4118AEQ is the appropriate eight-channel transceiver, how it fits around AK4626A and AK4628A codecs, and which functional alternatives require different pin assignments or modified circuit boards.

RFQ پەیوەندی
AK4126XQ - 6-Channel 192kHz 24-Bit SRC | Asahi Kasei
AK4126XQ

AK4126XQ - 6-Channel 192kHz 24-Bit SRC | Asahi Kasei

The Asahi Kasei Microdevices AK4126XQ is a 6-channel asynchronous sample-rate converter capable of processing 24-bit audio data at a maximum sampling frequency of 192 kHz, supplied in a 64-pin LQFP package. It is designed for audio systems that require input and output clocks, data widths, or sampling rates to be converted between asynchronous sources. An asynchronous sample-rate converter is an interface IC that transfers digital audio between systems whose clocks are not phase-locked. Instead of requiring both devices to share a common master clock, the converter accepts independently generated clocks and regenerates the output data clock. This capability helps isolate clock-domain differences, simplifies system integration, and supports professional audio, broadcast, consumer, and multichannel playback equipment. The verified product information identifies six audio channels, 24-bit conversion, operation up to 192 kHz, and asynchronous sample-rate conversion. The 64-pin LQFP package provides a practical surface-mount footprint for multichannel digital-audio boards. Unlike a basic audio codec, the AK4126XQ is identified as an Audio Special Purpose component and focuses on digital sample-rate conversion rather than analog-to-digital and digital-to-analog signal conversion. Its multichannel architecture makes one device suitable for surround-sound, home-theater, professional mixing, digital-recording, and media-transport subsystems where multiple channels must undergo consistent rate conversion. Asynchronous operation is particularly valuable when the source equipment, processing engine, and destination equipment use unrelated clocks or require independent rate adaptation. Designers should confirm clock topology, supported input and output rates, digital-audio interface format, voltage levels, signal timing, and decoupling requirements against the manufacturer datasheet before layout release. The relatively high pin count also warrants careful review of power and ground distribution, clock jitter margins, and routing of data signals. This product page consolidates verified distributor information, package identification, application guidance, and engineering-selection criteria. It also clearly separates documented facts from parameters that require confirmation from the complete manufacturer datasheet, helping engineers plan sourcing without confusing general audio-converter characteristics with verified AK4126XQ values.

RFQ پەیوەندی
BD34700FV-E2 - 4-Channel Sound Processor | ROHM
BD34700FV-E2

BD34700FV-E2 - 4-Channel Sound Processor | ROHM

The ROHM BD34700FV-E2 is a four-channel independent volume system, or analog sound processor, with built-in micro-step volume and a 6.5 V to 7.5 V supply range. It is supplied in the SSOP-B40 package and is designed for AV receivers and simple two-channel audio systems. The device uses micro-step volume to reduce switching pop noise during volume changes, helping preserve clean sound transitions. A sound processor such as the BD34700FV-E2 belongs to the audio signal-control hierarchy: analog audio processor -> volume-control IC -> audio special-purpose IC -> semiconductor. In a typical audio system, the processor sits between source-selection circuitry or preamplifier outputs and power-amplifier inputs. Its principal function is to provide independent attenuation and volume control for multiple audio channels while maintaining low-noise signal handling. The four-channel architecture is useful when a system needs separate main-volume, sub-volume, surround, or zone controls. The ROHM product page identifies the BD34700FV as a four-channel independent-volume system specifically suited to subvolume control in multichannel AV receivers and main-volume control in simple two-channel systems. This makes it a practical choice when several analog audio paths require coordinated level adjustment without assigning a dedicated attenuator to each channel. The built-in micro-step volume function is the central technical feature. Instead of changing the attenuation in large abrupt steps, the processor uses smaller volume increments, which can reduce audible switching pop noise during level transitions. In practice, the benefit depends on the surrounding signal path, control timing, and the selected attenuation step, but it can improve perceived audio quality during user-controlled volume changes. The BD34700FV-E2 uses an SSOP-B40 package and is identified by ROHM as an audio-channel, audio-special-purpose device. The verified product information confirms its 6.5 V to 7.5 V operating supply range, four-channel volume architecture, and micro-step volume feature. Detailed electrical limits, pin assignments, recommended application circuits, control-interface timing, and package dimensions should be taken from the manufacturer datasheet when finalizing a PCB design. Typical deployments include AV receivers, stereo amplifiers, compact audio systems, television audio paths, and other multichannel analog equipment. In an AV receiver, the device can provide independent level control for surround or subvolume channels; in a stereo product, it can provide the main volume function. The design should preserve adequate signal headroom between the processor and the downstream amplifier. For PCB implementation, confirm the exact SSOP-B40 footprint, pin numbering, exposed thermal-pad arrangement, and decoupling requirements in the ROHM datasheet. Connect the supply pins to the specified 6.5 V to 7.5 V range, place bypass capacitors close to the supply pins, and keep analog input and output routing short to reduce added noise and crosstalk. This product page combines the manufacturer’s product description with a practical view of channel architecture, micro-step volume behavior, package constraints, and design checks. It also distinguishes verified functions from electrical details that require direct review of the ROHM datasheet before a production release.

RFQ پەیوەندی
BD37033FV-ME2 - 5-Channel I2C Audio Processor | ROHM Semiconductor
BD37033FV-ME2

BD37033FV-ME2 - 5-Channel I2C Audio Processor | ROHM Semiconductor

ROHM Semiconductor BD37033FV-ME2 is a 5-channel car-audio sound processor with a 7 V to 9.5 V supply range, I2C control, and a 28-pin SSOP-B package. It integrates stereo source selection, three single-ended inputs, ground-isolated input, volume control, a three-band parametric equalizer, loudness, six-channel fader volume, a subwoofer low-pass filter, anti-aliasing filtering, and mixing-volume functions. An automotive sound processor is an analog audio IC that manages source routing, level control, and tonal shaping within a vehicle infotainment or head-unit signal chain. Its hierarchy is audio processor, sound-control IC, analog audio IC, interface IC, and integrated circuit. Rather than performing only low-level amplification, this device centralizes multiple controls that would otherwise require separate selectors, potentiometer circuits, filter stages, and control logic. The principal features are five-channel processing, three-band parametric equalization, six-channel fader volume, and I2C bus control. The three-band equalizer supports bass, midrange, and treble adjustment, while the loudness circuit compensates perceived low-frequency response at reduced listening levels. The subwoofer low-pass function helps separate bass content for a dedicated speaker. These functions suit compact automotive electronics where component count and control simplicity are important. The BD37033FV-M architecture combines analog signal paths with a digital control interface. I2C control allows an external host processor to adjust volume and sound settings while leaving the audio routing and filtering functions in a dedicated IC. The 28-SSOP-B package also supports surface-mount assembly. Because the device operates from a single 7 V to 9.5 V rail, its power architecture is appropriate for conventional automotive audio systems where a 12 V battery is regulated before reaching the processor. Typical uses include car-audio head units, multi-zone passenger-compartment audio systems, amplified speaker modules, subwoofer crossover controllers, and aftermarket infotainment units. The device is particularly useful when a design needs centralized source selection and programmable tonal adjustments without implementing those functions as discrete analog blocks. Integration also reduces the number of interconnects between a host controller and the audio signal path. Design work should begin with the manufacturer's pin-description and application-circuit tables. Confirm that every input, output, control, ground, and supply connection is routed according to the selected single-ended or ground-isolated configuration. The audio source impedance, acceptable external-component values, control address, and output loading should also be checked against the manufacturer guidance before PCB release. This product record combines the manufacturer-described processing functions, supply range, control bus, channel count, and package information with pin-to-drop-in replacement guidance, practical integration notes, and a parameter-by-parameter comparison. It is intended to accelerate component selection and board-level implementation for automotive audio designs.

RFQ پەیوەندی
BD3808AFS-E2 22-SOP Audio Processor | ROHM Semiconductor
BD3808AFS-E2

BD3808AFS-E2 22-SOP Audio Processor | ROHM Semiconductor

ROHM Semiconductor BD3808AFS-E2 is an integrated audio processor supplied in a 22-pin SOP package and handled as a tape-and-reel component. The manufacturer identification associates the device with the BD3808 series and describes it as an IC audio processor, placing it within the broader category of audio and sound-processing semiconductors. Its 22-pin surface-mount package supports compact circuit layouts while providing separate connections for the signal-processing functions, control interface, supply rails, and external audio-network connections defined by the device architecture. An audio processor is a specialized type of signal-processing integrated circuit used to manage functions within an audio signal path. Its general hierarchy is audio processor, audio IC, signal-processing IC, and semiconductor. Unlike a simple passive filter, an active audio processor can combine multiple analog, digital, control, or mixed-signal operations in one package. The exact signal topology and supported functions for BD3808AFS-E2 must be established from the manufacturer datasheet before circuit design begins. The verified product identity establishes the BD3808AFS-E2 ordering code, 22SOP case, tape-and-reel shipping format, and ROHM Semiconductor manufacturer. The suffix E2 identifies the orderable configuration, but the presence of the suffix alone does not establish electrical limits, temperature grade, supported audio formats, or performance figures. Those device-specific parameters require confirmation in the manufacturer datasheet rather than inference from the catalog description. BD3808AFS-E2 is intended for manufacturers integrating a dedicated audio-processing stage into home audio, consumer electronics, communication equipment, and other sound-system products. Its integrated role can simplify a design when several closely related signal operations must be coordinated in one controlled package. The 22-pin SOP format also makes it suitable for surface-mount assembly processes that do not require a fine-pitch BGA or QFN land pattern. A correct implementation depends on careful review of the pin-description table, recommended application circuit, external component values, and decoupling requirements in the manufacturer datasheet. Designers should preserve the exposed land pattern and pin numbering of the 22SOP package, route audio signals according to the reference layout, and keep sensitive analog paths physically separated from noisy return-current paths where the application guidance permits. This product page consolidates the verified ordering identity, package information, current sourcing links, and engineering selection guidance. It also distinguishes confirmed package-level facts from electrical details that must be read from the authoritative manufacturer datasheet, helping engineers create a reliable procurement and design-review record for BD3808AFS-E2.

RFQ پەیوەندی
CS4236B-JQ - 2-Channel Audio Signal Processor | Cirrus Logic
CS4236B-JQ

CS4236B-JQ - 2-Channel Audio Signal Processor | Cirrus Logic

Cirrus Logic Inc. CS4236B-JQ is a 2-channel multimedia audio signal processor with an input mixer and wavetable-synthesis interface, supplied in a 100-pin TQFP package measuring 14 mm by 14 mm. The CrystalClear device is designed for legacy PC multimedia audio systems and supports Microsoft Windows Sound System operation while maintaining compatibility with software written for Sound Blaster and Sound Blaster Pro interfaces. A multimedia audio signal processor integrates several functions needed to encode, mix, and route audio signals within a computer or embedded sound-card architecture. In the wider semiconductor hierarchy, the CS4236B belongs to the audio codec and audio interface IC family, combining analog audio signal processing, digital control, and host-bus connectivity. The CS4236B adds an input mixer and wavetable-synthesis interface to the original CS4236 architecture. The CS4236B is compatible with the Microsoft Windows Sound System standard and is described as fully compliant with Microsoft PC '97 and WHQL audio requirements. Its two-channel audio processing capability supports multimedia applications that require playback, recording, mixing, and software-controlled sound functions. The 100-TQFP package provides a high pin count suitable for the device's mix of analog, digital, clock, control, and host-interface functions. Technical implementation depends on the legacy audio subsystem and its control software. Because the CS4236B remains pin-compatible with the CS4236, a replacement can reuse the original board footprint while adding input mixing and wavetable synthesis. The operating system, host interface, analog signal path, clocking arrangement, and software driver must still be checked before treating the newer device as a functional replacement in an existing system. Typical uses include vintage sound cards, industrial personal computers, multimedia kiosks, retro-computing restorations, and specialized embedded audio platforms that depend on Windows Sound System or Sound Blaster software compatibility. It is particularly relevant where an original sound controller has failed and the replacement must preserve the existing PCB layout and legacy software environment rather than adopt a modern USB audio interface. Design work should begin with the manufacturer's pin-description table and application information. Confirm the analog input and output routing, DMA and interrupt requirements, reset behavior, clock source, and supported host platform before assembly. Pay particular attention to analog grounding, reference connections, and bypass capacitors because these areas determine channel balance, noise performance, and reliability. This product page combines the functional distinctions of the CS4236B with practical guidance for legacy PC audio integration, package-aware sourcing, and verification of drop-in alternatives. It is intended to help engineers determine whether the CS4236B-JQ satisfies both the electrical interface requirements and the mechanical constraints of an existing sound-card design.

RFQ پەیوەندی
CS4280-CQ PCI Audio Interface | Cirrus Logic | 128-TQFP
CS4280-CQ

CS4280-CQ PCI Audio Interface | Cirrus Logic | 128-TQFP

Cirrus Logic, Inc. CS4280-CQ is a CrystalClear PCI audio interface integrated circuit packaged in a 128-TQFP surface-mount package measuring 20 x 14 mm. The verified distributor record identifies the device as a one-channel audio volume-control IC, while legacy hardware documentation identifies it as a PCI audio interface associated with CrystalClear sound-card designs. It is therefore best understood as a legacy multimedia audio controller rather than a modern general-purpose audio codec. An audio interface IC is a semiconductor that connects a computer or multimedia bus to an external audio subsystem. The CS4280-CQ occupies the audio-controller level of the signal chain, where digital audio and control information pass between the host system and supporting codec, converter, or amplifier circuitry. This broader category includes PCI audio controllers, audio codecs, digital volume controllers, and mixed-signal interface ICs used in computers, sound cards, and other multimedia equipment. The CS4280-CQ uses a 128-TQFP package and a nominal 3.3 V connection for the crystal and PLL supply identified in the device documentation. Its suffix corresponds to a ceramic-body quad flat package offered in a 20 x 14 mm outline. The available verified records also identify a serial control connection and a one-channel digital volume-control role, although detailed electrical limits, supported sample rates, clocking modes, and host-interface timing are not included in the supplied source data. The CS4280-CQ belongs to the CrystalClear generation of PCI audio solutions from the late 1990s. Historical documentation states that it is pin-compatible with the earlier CS4614 and CS4622/CS4624 devices and is commonly paired with the CS4297 audio codec. This makes it a notable component in period-correct PCI audio-card repair, restoration, cloning, and industrial or retro-computing projects where an original footprint can reduce board-level rework. Typical implementations include PCI sound cards, industrial personal-computer audio subsystems, multimedia appliances, and retrofit projects that require the original CrystalClear signal chain. The verified search results specifically identify the CS4280 in the JoyTech Twister 3D sound card and Pine Technology PT2620. A restoration design must also account for obsolete system drivers and operating-system support, because silicon compatibility alone does not guarantee software compatibility. For a replacement or repair, verify the PCB land pattern, supply rails, signal names, clock source, codec interface, and firmware expectations before ordering. Do not assume that a similarly described volume-control IC is electrically interchangeable. The verified data establishes CS4281-CQ as a cross-reference alternative, but the supplied records do not provide enough pin-level and parametric information to certify an unconditional drop-in replacement. This product record combines verified package, lifecycle, pricing, and legacy-compatibility information with explicitly identified data gaps. It distinguishes the CS4280-CQ from modern audio codecs, identifies the strongest documented alternatives, and highlights the host-driver and PCB-verification constraints that are essential when restoring a legacy PCI audio design.

RFQ پەیوەندی
CS8401A-IS - Dual-Channel Digital Audio Transmitter | Cirrus Logic
CS8401A-IS

CS8401A-IS - Dual-Channel Digital Audio Transmitter | Cirrus Logic

Cirrus Logic CS8401A-IS is a monolithic CMOS dual-channel digital audio interface transmitter supporting AES/EBU, IEC 958 S/PDIF, and EIAJ CP-340 formats, supplied in a 24-pin SOIC package. It accepts audio and control data separately, performs multiplexing and biphase-mark encoding internally, and drives a transmission line directly or through a transformer. Its 4.5 V to 5.5 V supply range and -40°C to +85°C operating range suit industrial audio equipment. A digital audio interface transmitter converts parallel or serial source audio into a standardized digital transmission format. The CS8401A belongs to the digital audio transmitter hierarchy, combining channel multiplexing, control-data handling, line encoding, and output-driver functions in one CMOS integrated circuit. This simplifies the output stage of CD, DVD, professional-audio, broadcast, and consumer-electronics systems compared with a discrete encoder implementation. Key features include two-channel transmission, separate audio and control inputs, internal multiplex and biphase-mark encoding, and support for direct or transformer-coupled transmission lines. The device also includes power-down and reset protection with mute control. These functions allow designers to standardize digital-audio outputs while reducing external logic count and keeping the transmitter close to the system audio source. Technically, the monolithic CMOS implementation combines the digital encoding functions with an output stage designed for digital-audio transmission lines. Internal multiplexing allows two audio channels to share one encoded interface, while the biphase-mark stage provides the line coding required by the supported AES/EBU, S/PDIF, and EIAJ CP-340 formats. The CS8401A-IS is therefore not a codec or DAC; it is the interface stage that converts already-generated audio information into a transmit-ready digital stream. Typical applications include consumer digital-audio equipment, professional sound consoles, broadcast and studio signal chains, industrial instrumentation with digital audio outputs, computer multimedia equipment, and optical-disc player interfaces. The supported EIAJ CP-340 function also makes the transmitter relevant to CD-style digital-audio interfaces where that format is required. Designers should keep the CS8401A-IS close to the transmitter output and observe the manufacturer’s input, output, decoupling, and grounding recommendations. Select the transformer-coupled configuration when the connected interface requires isolation or impedance matching; use the direct-drive configuration only when its output and loading requirements suit the target cable and receiver. Confirm the interface format, clocking, control polarity, and mute behavior before releasing a PCB design. This product overview combines the manufacturer’s interface capabilities with practical package, sourcing, comparison, and replacement guidance. It also distinguishes the CS8401A transmitter from codecs and converters, helping engineers locate the CS8401A-IS datasheet, understand its 24-pin implementation, and determine whether a directly interchangeable ordering variant meets the required supply, temperature, and assembly conditions.

RFQ پەیوەندی
CS8406-IZ - 192 kHz Digital Audio Transmitter | Cirrus Logic
CS8406-IZ

CS8406-IZ - 192 kHz Digital Audio Transmitter | Cirrus Logic

Cirrus Logic CS8406-IZ is a monolithic CMOS digital audio interface transmitter with a maximum sampling rate of 192 kHz, one audio channel, and a 28-pin TSSOP package. It accepts audio and digital data, multiplexes and encodes the information, and drives the resulting digital audio signal onto a cable according to AES3, IEC60958, S/PDIF, or EIAJ CP1201 standards. A digital audio transmitter is an interface IC that converts source audio and associated digital information into a standardized serial digital-audio signal. It belongs to the digital audio transmitter category within interface ICs and audio codecs. Its primary role is to provide a standards-compatible output stage for equipment that distributes digital audio between professional, consumer, and automotive audio systems. The CS8406-IZ supports digital audio operation up to 192 kHz and provides one transmitter channel. Its CMOS implementation combines the audio input, digital-data multiplexing, standard-compliant encoding, and output-driver functions in a single monolithic device. According to the manufacturer datasheet, the supported outputs include AES3, IEC60958, S/PDIF, and EIAJ CP1201 formats, allowing the same transmitter to serve multiple digital-audio ecosystems. The verified device information identifies a 3.14 V to 5.25 V operating supply range and an industrial temperature range from -40°C to +85°C. It is offered in a 4.40 mm TSSOP-28 surface-mount package with 28 terminals. These characteristics support compact consumer-electronics and industrial audio equipment where a standardized digital-audio output is required without allocating a separate transmitter circuit for each supported protocol. Typical uses include S/PDIF and AES3 digital-audio outputs in consumer receivers, professional audio interfaces, broadcast and studio equipment, home-theater products, automotive head-unit electronics, and digital recording systems. In these systems, the IC converts parallel or serial source information into a cable-compatible digital stream while preserving channel, validity, and user-bit handling defined by the applicable transmission standard. Designers should verify the complete pin assignment, supported clocking configuration, output architecture, and external component requirements in the manufacturer datasheet before layout. The 28-pin TSSOP-28 footprint should be treated as the mechanical baseline, and supply decoupling and output routing should follow the datasheet's recommended application circuit to avoid signal-integrity problems. This page consolidates the verified CS8406-IZ electrical, environmental, packaging, protocol, purchasing, and replacement information. It also distinguishes documented same-package family options from unsupported cross-package substitutes and provides practical implementation guidance beyond a distributor listing.

RFQ پەیوەندی
CS8416-CSZ 192kHz 8-Channel Audio Receiver | Cirrus Logic
CS8416-CSZ

CS8416-CSZ 192kHz 8-Channel Audio Receiver | Cirrus Logic

Cirrus Logic CS8416-CSZ is a monolithic CMOS digital audio interface receiver for decoding one of eight stereo pairs according to the IEC60958, S/PDIF, EIAJ CP1201, or AES3 standards. The receiver supports digital audio operation up to 192 kHz and is packaged in a 28-pin SOIC. A digital audio interface receiver is an interface IC that converts a standardized serial digital-audio stream into a parallel PCM representation suitable for a downstream audio converter or digital signal processor. In the product hierarchy, the CS8416 is a digital audio receiver within an audio interface IC, a system-level audio codec interface, and ultimately a semiconductor component used in professional and consumer audio equipment. The principal feature of the CS8416 is its ability to select and decode one of eight stereo digital-audio inputs. Its support for IEC60958, S/PDIF, EIAJ CP1201, and AES3 allows one receiver design to cover several established digital-audio interfaces. The manufacturer describes the device as a 192 kHz digital audio interface receiver, while distributor records identify the CS8416-CSZ as an eight-channel, 28-SOIC audio receiver. The CS8416 also integrates a control interface for configuration. A distributor product record describes the device family as supporting 80-bit I2C or SPI control, operating with 3.3 V and 5 V supply levels, and drawing 11.8 mA under the stated operating condition. These characteristics place the part in the category of configurable digital-audio receiver ICs rather than a simple fixed-format line receiver. Typical applications include multichannel digital-audio routing, surround-sound receiver front ends, professional audio equipment, digital mixing consoles, set-top and television audio interfaces, and other systems that must recover PCM audio from S/PDIF or AES3 sources. The eight-input architecture is particularly useful when a product must accept multiple digital sources while presenting a common local output interface to an audio processor. Circuit implementation requires correct treatment of the digital clock, serial data, control bus, and analog supply domains. The exact pin assignments, supported control modes, channel-selection behavior, electrical limits, and decoupling requirements should be taken directly from the manufacturer datasheet rather than inferred from the family-level product descriptions. This product page consolidates the verified manufacturer and distributor facts for the CS8416-CSZ, distinguishes the SOIC-28 version from the 28-TSSOP CS8416-CZZ, and provides application guidance and comparison context focused on board-level replacement decisions.

RFQ پەیوەندی
CS8416-CZZ - 192kHz Digital Audio Receiver | Cirrus Logic
CS8416-CZZ

CS8416-CZZ - 192kHz Digital Audio Receiver | Cirrus Logic

Cirrus Logic CS8416-CZZ is a 192 kHz digital audio interface receiver with an 8:2 input multiplexer, support for up to eight stereo input channels, and three general-purpose output pins in a 28-pin TSSOP package. The monolithic CMOS receiver decodes IEC60958, S/PDIF, EIAJ CP1201, and AES3 digital-audio streams. A digital audio interface receiver is a specialized interface IC that converts serialized digital-audio signals into internal parallel data and clock information. It sits within the broader interface-IC hierarchy and supports consumer and professional audio systems that need reliable recovery of digital audio from optical, coaxial, or balanced digital connections. The CS8416 supports both single- and dual-channel digital-audio configurations. Key features include operation up to 192 kHz, an 8:2 input multiplexer, support for eight stereo input pairs, three routable general-purpose outputs, and extremely low jitter of 200 ps. These characteristics make the receiver useful in high-resolution audio equipment, professional recording systems, home-theater products, digital mixers, and multi-zone audio installations where accurate timing and flexible input selection are important. The CS8416 is implemented as a monolithic CMOS device. Its receiver architecture is designed for professional digital-audio standards, including IEC60958, S/PDIF, EIAJ CP1201, and AES3. The 8:2 multiplexer allows a system to select among multiple digital sources while preserving a common downstream audio-processing architecture. The 200 ps jitter specification is particularly valuable when downstream converters require precise word-clock recovery. Typical applications include professional digital consoles, surround-sound receivers, multi-channel recording equipment, digital audio routers, optical or coaxial audio input modules, and premium consumer audio products. The three general-purpose output pins provide additional signal routing options, while the broad input selection simplifies boards that accept several digital-audio sources. PCB design should treat the digital-audio interface as a high-speed, timing-sensitive connection. Keep the receiver close to the incoming digital-audio connector, maintain a continuous return path for each differential input, and route clock and data traces away from switching-power and motor-control nodes. Use the manufacturer pin-description table when assigning connector, supply, ground, clock, and output connections. This product record combines the manufacturer interface overview with engineering guidance on multiplexing, jitter-sensitive routing, input integration, and PCB implementation. It also identifies the relevant package constraints and clarifies where replacement decisions require additional pin-level and qualification review.

RFQ پەیوەندی
CS8421-CNZ - 32-Bit 192kHz Stereo SRC | Cirrus Logic
CS8421-CNZ

CS8421-CNZ - 32-Bit 192kHz Stereo SRC | Cirrus Logic

The Cirrus Logic CS8421-CNZ is a 32-bit, 192 kHz asynchronous stereo sample-rate converter in a 20-QFN package measuring 5 mm by 5 mm. It converts digital audio streams between different sampling rates using two channels, supports input and output word lengths of 16, 20, 24, or 32 bits, and can operate with completely asynchronous input and output clocks. The converter also supports external data-clock operation or autonomous operation using an integrated oscillator. A sample-rate converter is an interface IC that translates digital audio data from one clock domain to another without requiring the source and destination equipment to share a common sample clock. It belongs to the digital-audio IC hierarchy alongside audio codecs and digital audio interfaces. This capability is useful when equipment must accept audio from a clock domain that differs from the internal processing rate, such as a computer, broadcast, studio, or networked audio system. Principal performance features include a 175 dB dynamic range, -140 dB THD+N, operation without programming, and no requirement for an external master clock. Sampling rates can reach 211 kHz, with input-to-output sample-rate ratios spanning 1:8. The master-clock section supports 128 times Fs, 256 times Fs, and bypass operation, while the time-division multiplexing interface provides a practical connection to digital audio processors and transport devices. The CS8421 uses a monolithic CMOS implementation to combine asynchronous rate conversion, clocking support, and multichannel digital-audio routing in one device. Its 32-bit datapath accommodates high-resolution PCM audio, while the integrated oscillator offers a practical fallback when no external master clock is available. The 20-QFN surface-mount package supports compact audio conversion and clock-isolation designs, although careful decoupling and signal-routing practices remain necessary for high-performance audio boards. Typical uses include asynchronous audio bridges, digital mixing consoles, studio preamplifiers, broadcast equipment, hi-fi DAC boards, computer-audio interfaces, and multimedia systems that must reconcile unrelated sample-rate domains. The device is particularly valuable when converting high-resolution PCM streams to a rate accepted by an ADC, DAC, DSP, or digital transport while preserving low distortion and high dynamic range. For implementation, follow the pin-description table and reference configuration in the manufacturer datasheet when assigning data, clock, control, supply, and ground connections. Place input and output decoupling capacitors close to their associated pins, route high-speed digital signals over continuous reference planes, and isolate asynchronous clocks from sensitive analog sections to minimize data-dependent jitter and crosstalk. This product page combines the principal CS8421-CNZ operating characteristics with application guidance, lifecycle information, pinout-status disclosure, and a strict drop-in-replacement assessment. It also distinguishes verified engineering constraints from unavailable procurement details so engineers can evaluate the converter for a new design or an existing production board.

RFQ پەیوەندی
CS8421-DZZ 32-Bit 192 kHz Audio SRC | Cirrus Logic
CS8421-DZZ

CS8421-DZZ 32-Bit 192 kHz Audio SRC | Cirrus Logic

The Cirrus Logic CS8421-DZZ is a 32-bit, 192 kHz asynchronous stereo audio sample-rate converter packaged in a 20-pin TSSOP. It is designed for transparent conversion between asynchronous audio clock domains, supporting two-channel operation while maintaining 175 dB dynamic range and -140 dB THD+N according to the Cirrus Logic product page. The device operates from a 2.38 V to 2.62 V core supply and is specified over -40°C to +85°C. An asynchronous sample-rate converter is an audio interface device that accepts an input signal associated with one clock frequency and resamples it to a different output clock. It sits within the audio signal-chain hierarchy as a sample-rate converter, clock-domain interface, audio interface IC, and ultimately an analog-and-mixed-signal semiconductor. This makes it useful where a source device, digital audio processor, DAC, or network playback engine does not share a common master clock. Key characteristics of the CS8421-DZZ include 32-bit processing, a maximum sample rate of 192 kHz, stereo two-channel capability, and an asynchronous conversion architecture. Its stated dynamic range of 175 dB and THD+N of -140 dB make it appropriate for professional studio equipment, high-end consumer audio, digital mixers, broadcast infrastructure, and clock-domain isolation between digital audio sources. The 20-lead TSSOP package also permits reuse of TSSOP-20 board layouts where the surrounding circuitry satisfies the interface and grounding requirements. The CS8421-DZZ is identified by Cirrus Logic as discontinued. The family is also offered in a 20-pin QFN package, but that package option is not pin-compatible with the leaded CS8421-DZZ and therefore is not a drop-in substitution. Existing designs should check supply availability and consider a functionally similar asynchronous converter only after verifying digital interface timing, master-clock requirements, control logic, voltage levels, and package dimensions. When laying out a board, route the audio data and clock signals away from switching-node and high-current supply traces, provide solid ground-plane return paths, and decouple the 2.5 V core rail close to the device. Differential data signals should be length-matched within the limits stated in the manufacturer datasheet, and unused interface pins should be configured according to the device pin-description table rather than left floating by assumption. This page consolidates lifecycle information, verified package and operating details, application guidance, and drop-in replacement analysis. It also documents the key engineering constraints engineers must check before reusing a CS8421-DZZ design or selecting a replacement: exact pinout, master-clock topology, audio word length, sample-rate range, control-register behavior, power sequencing, and board-level isolation.

RFQ پەیوەندی
DG412 - Quad SPST CMOS Analog Switch 44V | Analog Devices
DG412

DG412 - Quad SPST CMOS Analog Switch 44V | Analog Devices

The Analog Devices DG412 (originally Maxim Integrated) is a precision monolithic quad SPST CMOS analog switch with four independent single-pole single-throw switches, a maximum supply rating of 44 V, a +/-15 V analog signal range, and on-resistance of 35 to 45 ohm depending on manufacturer grade, housed in a 16-pin SOIC package. An analog switch is a semiconductor device that passes or blocks an analog signal under digital control, acting as a relay replacement without moving parts. Within the signal-path hierarchy, the analog switch sits under signal switching ICs, itself a branch of interface and signal-conditioning semiconductors. Quad SPST devices such as the DG412 integrate four independent switches on one die, letting one logic-controlled part replace four discrete transistor-level switching circuits while preserving signal integrity. Key features include TTL- and CMOS-compatible logic inputs, fast switching with turn-on time around 110 ns per the original datasheet family, ultra-low power dissipation near 0.35 mW quiescent, and improved on-resistance matching between switches of 3 ohm max with guaranteed rDS(on) flatness over the signal range of 4 ohm max in the redesigned Maxim version. The wide 44 V absolute maximum supply rating supports +/-15 V industrial analog rails. Architecturally, the DG412 family uses monolithic CMOS transmission-gate switches with internal level shifting, allowing a single 5 V logic signal to control signals swinging to +/-15 V. Drop-in compatibility with the older DG211/DG212 series simplifies legacy redesigns. Typical applications include audio signal routing, precision test-and-measurement multiplexing, data-acquisition front ends, sample-and-hold circuits, and industrial signal switching where relay-free switching is required. Design consideration: keep control-input logic levels within datasheet limits and observe the analog signal range so switches never see signals beyond the supply rails, which would turn on protection structures and distort the signal. This page synthesizes distributor pricing, verified drop-in alternatives from Analog Devices, Renesas and Vishay, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
DP83TC816RHARQ1 - 100Base-T1 Automotive Ethernet PHY | TI
DP83TC816RHARQ1

DP83TC816RHARQ1 - 100Base-T1 Automotive Ethernet PHY | TI

The Texas Instruments DP83TC816RHARQ1 is an automotive-qualified 100Base-T1 Ethernet physical layer transceiver with IEEE 802.1AS gPTP support, AVB clock generation, and TC10 Sleep-Wake, compliant with IEEE 802.3bw and the Open Alliance, housed in a 36-pin VQFN package. It transmits and receives 100 Mbps data over a single unshielded or shielded twisted-pair cable with xMII interface flexibility. An Ethernet PHY (physical layer transceiver) is the IC that connects a media access controller (MAC) to the physical cabling of a network. In the automotive network hierarchy, the PHY sits between the MAC integrated in a SoC or gateway processor and the single twisted-pair (STP/UTP) wiring harness, performing encoding, decoding, clock recovery, equalization, and link diagnostics as defined by the 100Base-T1 standard (IEEE 802.3bw, formerly Broadcom BroadR-Reach). Key features include RGMII and SGMII MAC interface options, AVB (Audio Video Bridging) clock generation for deterministic in-vehicle networking, IEEE 802.1AS time synchronization support, and TC10 Sleep-Wake power management for network standby. Automotive AEC-Q100-grade qualification per the -Q1 suffix makes it suitable for in-vehicle deployment across extended temperature ranges. Architecturally, the device integrates the full analog front end - line drivers, receivers, echo canceller, adaptive equalizer, and clock recovery loop - plus a digital baseband engine and flexible PLL/clock synthesis block, allowing a single crystal to generate gPTP-aligned reference clocks for media playback and camera synchronization. Typical applications include automotive gateway ECUs, ADAS camera and radar domains, infotainment head units, and zonal body controllers that require 100 Mbps single-pair Ethernet links with synchronized AVB traffic. Design consideration: verify MAC interface mode selection (RGMII vs SGMII) at reset strapping early in the project, since this determines both the PCB routing plan and clock topology. This page synthesizes distributor sourcing data, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
FSA4480UCX - USB Type-C Audio Switch 25-WLCSP | onsemi
FSA4480UCX

FSA4480UCX - USB Type-C Audio Switch 25-WLCSP | onsemi

The onsemi FSA4480UCX is a high-performance USB Type-C port multimedia analog audio switch that supports analog audio headsets, housed in a 25-ball WLCSP package (2.24 x 2.28 mm) with a 6-channel switch configuration and integrated protection function. A USB Type-C analog audio switch is a special-purpose analog multiplexer that lets a single reversible USB Type-C connector carry multiple signal types simultaneously. In the port-sharing hierarchy, it sits between the USB Type-C receptacle and the application processor's USB PHY and audio codec, routing USB 2.0 data, analog left/right audio, sideband-use (SBU) lines, and analog microphone signals onto the shared pins. This eliminates dedicated 3.5 mm jacks and enables slimmer smartphone and tablet designs. Key features of the FSA4480 include sharing of a common USB Type-C port to pass USB 2.0 signal, analog audio, sideband use wires, and analog microphone signal, plus support for high voltage on the SBU port and USB port on the receptacle side - critical because SBU pins can be exposed to fault voltages during accessory attach and cable orientation changes. Technically, the device is fabricated as an integrated CMOS analog switch array with low on-state characteristics suited to audio-band signal integrity. The WLCSP (wafer-level chip-scale package) die size of 2.24 x 2.28 mm minimizes board area and shortens analog signal traces, which reduces insertion loss and crosstalk for audio and high-speed USB routing. The FSA4480 is documented in the onsemi datasheet 'USB Type-C Analog Audio Switch with Protection Function' (published 2019-11-22, 29 pages). Typical applications include smartphones and tablets using a single Type-C connector for audio accessories, laptop and notebook audio-headset sharing, docking stations, and true-wireless charging cases requiring port consolidation. The protection function makes it especially suitable for consumer ports exposed to harsh accessory environments. Design consideration: verify SBU high-voltage tolerance against your application's worst-case fault scenario, and keep WLCSP routing impedance-controlled; WLCSP packages require careful PCB fanout and do not support rework as easily as QFN alternatives. This page synthesizes distributor pricing, cross-reference guidance, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
ISD8104RYI - 2W Class AB Audio Amplifier | Nuvoton
ISD8104RYI

ISD8104RYI - 2W Class AB Audio Amplifier | Nuvoton

The Nuvoton ISD8104RYI is a 2W mono Class AB audio power amplifier IC with differential input pair and chip enable, manufactured by Nuvoton Technology Corporation. The RYI suffix denotes the SOP-8 surface-mount package with exposed thermal pad option family, and the device integrates a single-channel (mono) amplifier output stage in a compact 8-pin footprint. A Class AB audio amplifier is a linear power amplifier topology in which output transistors conduct continuously through the signal cycle, combining the low distortion of Class A designs with the improved efficiency of Class B. Within the power management and audio signal chain hierarchy, it sits downstream of DACs or codec outputs and upstream of the loudspeaker, converting line-level analog signals into speaker-drive-capable power. The ISD8104 belongs to Nuvoton's ISD audio amplifier product line, alongside the ISD8102, which differs by offering an earphone-sense input (SE/Diff) instead of a dedicated differential input pair. Key features include 2W output power at mono Class AB operation, a true differential input pair that rejects common-mode noise picked up on the PCB, and a chip enable (CE) pin that allows the system controller to shut the amplifier down and minimize standby current draw in battery-powered products. The differential input architecture is significant for designs where the amplifier sits far from the signal source, such as alarm panels or appliance panels. The Class AB output stage provides low crossover distortion, important for voice-band announcement and alerting audio where intelligibility matters more than maximum efficiency. Typical applications include doorbell and intercom systems, industrial alarm sounders, small appliance voice prompts, toys, and battery-powered notification devices. When designing with the ISD8104RYI, consult the manufacturer datasheet for gain-setting resistor values, supply voltage limits, and the thermal pad soldering requirements, since power dissipation in a 2W Class AB stage depends strongly on supply voltage and load impedance. This page synthesizes distributor listings, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
ISD9361RI - Serial Voice Record/Playback IC, 64-LQFP | Nuvoton
ISD9361RI

ISD9361RI - Serial Voice Record/Playback IC, 64-LQFP | Nuvoton

The Nuvoton Technology ISD9361RI is a serial-interface voice record and playback IC (Message Serial series) supplied in a 64-pin LQFP package measuring 7 x 7 mm, rated for an operating temperature range of -40C to +85C. The device integrates the analog audio front end and message management logic required to record and play back voice messages under serial control from a host microcontroller. A voice record and playback IC is a mixed-signal audio device that converts microphone input into stored digital audio and converts stored digital data back into analog sound using an integrated codec, speaker driver interface, and message indexing engine. Such devices sit within the broader hierarchy of audio codec ICs and human-machine-interface semiconductors, where they offload audio capture and playback tasks from the main processor. Key features of the ISD9361RI include its serial host interface, message-based storage architecture for indexed voice segments, integrated record and playback paths, industrial-grade temperature rating from -40C to +85C, and a compact 7 x 7 mm 64-LQFP surface-mount package that suits dense PCB layouts. The message-serial architecture allows a host controller to address individual voice messages, enabling prompt-driven user interfaces without streaming raw audio data over the bus. Technically, the device combines an analog front end for microphone and line inputs with a digital message-management core, providing self-contained record/playback sequencing. Host controllers issue serial commands to trigger specific messages, simplifying firmware in applications that only need canned announcements or prompt playback. Typical applications include industrial equipment voice annunciators, medical device audible prompts, security and alarm announcement panels, elevator and building-automation voice prompts, and consumer appliance user interfaces. Design consideration: because the ISD9361RI is officially listed as obsolete, new designs should secure long-term stock or plan a successor strategy before committing to this part; verify message storage duration and audio bandwidth against the manufacturer datasheet. This page synthesizes distributor stock data, lifecycle status, and sourcing guidance for an obsolete Nuvoton voice IC - information not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
LTC4307IMS8#TRPBF - Hot Swappable 2-Wire Bus Buffer | Analog Devices
LTC4307IMS8#TRPBF

LTC4307IMS8#TRPBF - Hot Swappable 2-Wire Bus Buffer | Analog Devices

The Analog Devices LTC4307IMS8#TRPBF is a low offset hot swappable 2-wire bus buffer with stuck bus recovery, supporting 400kHz I2C/SMBus operation in an 8-lead MSOP package (3.00mm width). It allows I/O card insertion into a live backplane without corrupting the data and clock busses. A 2-wire bus buffer, sometimes called an I2C buffer or bus repeater, is an interface IC that isolates the capacitance and voltage levels of two segments of an I2C or SMBus. In the system hierarchy it sits between the physical bus wires and the master or slave devices, forming part of the broader interface and signal-buffer family. Its role is to let one segment carry heavy loads (many devices, long cables, large capacitance) while the other segment presents only the buffer's very low input capacitance. Key features of the LTC4307 include bidirectional buffering that keeps backplane and card capacitances isolated, sub-10pF data and clock input capacitance on the card side, a low offset voltage architecture that accurately passes logic levels, and stuck bus recovery logic that frees a bus segment when a slave device holds SDA low. The hot swap capability means connections can be made and broken with the backplane powered, a critical property for ATCA, blades, and server storage platforms. Technically, the LTC4307 uses Analog Devices' rising-edge accelerators and digital rise-time recognition to distinguish valid start and stop conditions from slow edges caused by heavy bus capacitance. This allows 400kHz operation even when the buffered segment is heavily loaded, while level-shifting and offset compensation preserve timing margins across both bus segments. Typical applications include live-backplane I/O card insertion, HDMI DDC bus isolation, server and storage management SMBus isolation, and telecom line-card 2-wire bus segmentation. In each case the buffer prevents bus lockups during insertion events and extends the usable bus capacitance beyond the 400pF limit of a raw I2C segment. Design consideration: connect the ENABLE pin correctly for power sequencing and provide a small bypass capacitor on each VCC pin; during hot insertion the buffer must be the first element to see the backplane bus so card capacitance never appears on the backplane segment. This page synthesizes distributor pricing, drop-in alternatives (including the Renesas ISL33001IUZ cross-brand equivalent), and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
MAX4062EUB+ - Differential Mic Preamplifier, 2.4V-5.5V | Maxim
MAX4062EUB+

MAX4062EUB+ - Differential Mic Preamplifier, 2.4V-5.5V | Maxim

The Analog Devices (Maxim Integrated) MAX4062EUB+ is a differential-input microphone preamplifier with internal bias and complete shutdown, operating from a 2.4V to 5.5V single supply in a 10-pin uMAX (uSOP/MSOP) package. It provides adjustable gain with excellent power-supply rejection ratio (PSRR) and common-mode rejection ratio (CMRR), and integrates a low-noise microphone bias source, eliminating external bias components in voice-band signal chains. A differential microphone preamplifier is a small-signal audio amplifier that senses the voltage difference between an electret or MEMS microphone's output terminals and rejects common-mode interference picked up on the microphone lines. Within the signal-chain hierarchy (sensor -> preamplifier -> ADC/codec -> baseband), the microphone preamplifier is the first analog gain stage and largely determines the noise floor and dynamic range of a voice recording path. Differential input architectures are preferred in portable electronics because handset wiring is short, high-impedance, and exposed to RF and display noise. Key features of the MAX4062EUB+ include the integrated microphone bias generator, rail-to-rail output stage (Class AB per DigiKey categorization), complete shutdown for power savings in battery-operated systems, adjustable gain set by external resistors, and industrial temperature grade. The wide 2.4V to 5.5V supply range allows direct operation from a single Li-ion cell or a 3.3V/5V rail without a dedicated regulated supply. Architecturally, the device belongs to the MAX4060/MAX4061/MAX4062 family; the MAX4062 variant is the member with internal bias and complete shutdown. Excellent PSRR and CMRR keep display, RF, and switching-regulator noise out of the microphone path, a critical attribute for low-noise portable audio as stated in the Maxim/ADI datasheet general description. Typical applications are notebook PC microphone inputs, PDA voice recorders, smartphone/handset voice paths, and VoIP headsets - any battery-powered system where a differential electret or MEMS microphone must be amplified and biased from a limited power budget. Design-wise, set the gain with the external feedback resistors and verify that the bias source can supply the chosen microphone's current; place the bias-decoupling capacitor close to the bias pin to preserve noise performance. This page synthesizes distributor listing data, family cross-references, and practical design notes beyond what a plain datasheet mirror provides, with pricing as of 2026-10-12.

RFQ پەیوەندی
MAX4855ETE+ - 0.75Ω Dual SPDT Audio Switch | Analog Devices
MAX4855ETE+

MAX4855ETE+ - 0.75Ω Dual SPDT Audio Switch | Analog Devices

The Analog Devices MAX4855ETE+ is a dual SPDT analog audio switch with integrated comparators, 0.75 Ω on-resistance, and a 16-pin thin QFN package measuring 3 mm × 3 mm. It operates from 2 V to 5.5 V, supports audio-signal routing over -40°C to +85°C, and is designed for space-constrained portable audio equipment. An analog switch is an integrated circuit that routes low-frequency analog signals between circuit nodes under digital control. The MAX4855 belongs to the analog-switch and multiplexer hierarchy, where SPDT means single-pole, double-throw: one common terminal can be connected to either of two switched terminals. This makes the device useful for selecting audio paths, supporting speaker-to-headset routing, and implementing controlled source selection within portable consumer electronics. Key features include two independently controlled SPDT channels, 0.75 Ω on-resistance, operation across a 2 V to 5.5 V supply range, and integrated comparators. The low on-resistance helps limit signal attenuation in audio paths, while the compact 3 mm × 3 mm package saves board area in cell phones, notebook computers, PDAs, and other handheld devices. The manufacturer identifies audio-signal routing and speaker-headset switching as principal applications. Each switch channel uses a common terminal and two selectable terminals, with control logic determining the active signal path. Integrated comparators can assist in detecting or controlling signal conditions without requiring separate comparison circuitry. The device uses a CMOS implementation and is specified in a TQFN-16 package, identified by package code MO-220-WEED in distributor documentation. The + suffix denotes the lead-free ordering option, while ETE identifies the extended-temperature 16-pin TQFN package configuration. Typical deployments include headphone and headset routing, audio accessory selection, portable-device input selection, and compact audio-signal switching. Because the MAX4855 handles analog paths rather than high-speed data, its principal design concerns are acceptable insertion loss, off-state leakage, control compatibility, exposed-pad grounding, and clean supply bypassing rather than digital edge-rate performance. In layout, place input and output routing close to the switched pins to minimize parasitic capacitance and pickup. Connect the exposed thermal pad and ground pins according to the manufacturer land pattern, provide local supply decoupling, and keep control traces away from sensitive audio paths. Verify that the selected signal amplitude and supply voltage remain inside the device's stated operating limits. This page consolidates manufacturer specifications, distributor availability, application guidance, sourcing information, and design cautions into one engineering reference. It also distinguishes verified facts from parameters that still require confirmation from the full datasheet, helping designers avoid assuming unreported electrical limits or pin functions.

RFQ پەیوەندی
MC145481DT - 6-Bit PCM Codec Filter | NXP | 20-TSSOP
MC145481DT

MC145481DT - 6-Bit PCM Codec Filter | NXP | 20-TSSOP

The NXP Semiconductors MC145481DT is a general-purpose per-channel PCM codec-filter with one ADC and one DAC, 6-bit conversion resolution, selectable Mu-Law or A-Law companding, and a 20-pin TSSOP package. Designed for compact telephony and digital audio interfaces, it combines analog-to-digital conversion, digital-to-analog conversion, filtering, and companding functions in a single integrated circuit. The operating supply identified for this device is 3 V, while its industrial temperature grade and gull-wing terminal format support applications where extended-temperature operation is required. A PCM codec-filter is an interface IC that converts analog voice or audio signals into a digital PCM stream and converts digital PCM data back into an analog signal. In the broader hierarchy, this device belongs to the codec and audio-interface class of integrated circuits and ultimately to the interface-IC and semiconductor categories. Its per-channel architecture allows each channel to use the same conversion and filtering framework, making it suitable for compact audio or communications equipment requiring separate encode and decode paths. The principal specifications are its 6-bit ADC resolution, 6-bit DAC resolution, one ADC, one DAC, one PCM channel, and 20-pin TSSOP construction. Pin-selectable Mu-Law and A-Law companding gives the device flexibility for systems using either companding convention. The SOG and SSOP family construction described for the device also highlights its use in space-constrained communications designs, while the MC145481DT orderable form uses the smaller 20-pin TSSOP outline. Architecturally, the codec combines an analog input path, analog output path, digital PCM interface, filtering, and companding logic. That integration reduces the number of discrete blocks needed for a basic PCM voice path. The 6-bit format prioritizes compact digital word length and conventional telephony compatibility rather than the resolution expected from modern high-fidelity audio converters. System integrators should therefore evaluate the required signal-to-noise ratio and distortion performance against their communication standard before finalizing the design. Typical uses include PCM telephony interfaces, digital telephone speech paths, compact communications modules, audio capture and playback blocks, and embedded voice-processing systems. In a speech interface, the ADC path accepts an analog voice signal and produces a companded PCM representation, while the DAC path reconstructs an analog output from digital PCM data. A system clock, suitable analog filtering, power rails, and correct companding configuration remain necessary around the device. The primary design consideration is PCB implementation. Place the analog and digital return paths carefully, connect decoupling capacitors close to the appropriate supply pins, and use the package pin-description table in the manufacturer datasheet when assigning tracks and test points. Keep sensitive analog input and output routing away from high-speed digital clock lines to reduce crosstalk and preserve signal quality. This product page consolidates the identified device specifications, package information, sourcing structure, and engineering considerations into one practical reference. It also distinguishes verified functional facts from parameters requiring engineering confirmation, helping designers decide whether this legacy 6-bit PCM codec-filter matches the required channel count, interface format, environmental grade, and board footprint.

RFQ پەیوەندی