بەرهەمەکان (770+)

LTC3310SIV#WPBF - 10A Silent Switcher 2 Buck Regulator | ADI
LTC3310SIV#WPBF

LTC3310SIV#WPBF - 10A Silent Switcher 2 Buck Regulator | ADI

The Analog Devices LTC3310SIV#WPBF is a 10 A monolithic synchronous step-down DC/DC converter using the proprietary Silent Switcher 2 architecture with internal hot-loop bypass capacitors, housed in a 3 mm × 3 mm 18-lead LQFN (also described as 18-TFQFN Exposed Pad) package. It accepts a 2.25 V to 5.5 V input supply and delivers an adjustable output from 0.5 V up to 5.5 V at up to 10 A of continuous load current, with a default 2 MHz switching frequency that minimizes EMI and enables a compact solution footprint. A buck (step-down) DC/DC converter is a switched-mode power supply topology that uses an inductor, a switching element, and output filtering to efficiently convert a higher DC input voltage into a lower DC output voltage. Buck regulators occupy the power management IC (PMIC) category inside the broader semiconductor hierarchy, and they are preferred over linear regulators whenever the input-to-output voltage differential is large, because switching conversion avoids the continuous power dissipation of a series-pass element. Silent Switcher 2 is a refinement that integrates the input hot-loop bypass capacitor inside the package, drastically shrinking the high di/dt loop area to suppress radiated EMI without external ceramic capacitors. Key features of the LTC3310SIV#WPBF include 10 A continuous output from a 3 mm × 3 mm package, 2 MHz switching frequency (programmable from 1 MHz to 3 MHz), internal bypass capacitors, ±1% output voltage accuracy, internal soft-start, power-good flag, and 95% peak efficiency. The IV suffix denotes the industrial temperature grade (-40 °C to +125 °C). The exposed pad provides a low thermal resistance path that supports full 10 A delivery without a heatsink on a 4-layer board. Typical applications include point-of-load regulation for FPGAs, ASICs, and SoCs, optical module supplies, telecom/datacom rails, distributed 5 V bus architectures, and portable instrumentation. Because the device runs at 2 MHz, designers can use a 0.47 µH to 1 µH inductor and a 22 µF output capacitor to keep the total solution below 25 mm × 15 mm. Use the power-good output to sequence downstream rails and the TRACK/SS pin to soft-start into large bulk capacitance. Choose the LTC3310SIV#WPBF when 10 A of low-noise point-of-load current is required from a 5 V rail in a small footprint. For 6 A-class designs, the LTC3310SIV-1#PBF shares the same pinout. Pair it with the LT8640/8645 family for higher-current multi-rail systems and refer to the LTC3310S datasheet for loop compensation guidelines.

RFQ پەیوەندی
LTC3310SIV-1#PBF - 10A Silent Switcher 2 Step-Down DC/DC | ADI
LTC3310SIV-1#PBF

LTC3310SIV-1#PBF - 10A Silent Switcher 2 Step-Down DC/DC | ADI

The Analog Devices LTC3310SIV-1#PBF is a 10A synchronous step-down DC/DC converter using Silent Switcher 2 architecture with internal hot-loop bypass capacitors, packaged in an 18-lead 3mm x 3mm LQFN with exposed pad. It operates from a 2.25V to 5.5V input and produces an adjustable output from 0.5V up to 5.5V (the -1 variant uses an external reference, while the non- -1 variant uses an internal 0.5V reference). What is a Silent Switcher 2 buck converter? A buck (step-down) DC/DC converter is a switching regulator that efficiently converts a higher DC voltage to a lower DC voltage by chopping the input with a power switch and smoothing with an LC filter. Silent Switcher 2 is Analog Devices' second-generation ultra-low-EMI architecture that integrates the bypass capacitors directly inside the package over the inductor (hot loop), virtually eliminating the high-frequency loop antenna and reducing radiated EMI by up to 20 dB compared with conventional buck layouts. Key features include 10A continuous output current from a tiny 9 mm² footprint, programmable switching frequency up to 5 MHz, 95% peak efficiency at 1 MHz, and ±1% output voltage accuracy over line, load, and temperature. The LTC3310SIV-1#PBF also integrates internal MOSFETs plus bootstrap diodes, so no external Schottky or FETs are required, and it supports external clock synchronization for multi-rail systems. The device uses a constant-frequency peak current-mode control architecture with internal compensation, simplifying loop design. The -1 variant accepts an external reference voltage on the VREF/ITH pin, allowing it to track a system reference or implement DDR termination. The internal MOSFETs use low-Qg, low-Rds(on) silicon for high efficiency even at light loads, and the IC includes input overvoltage, output overvoltage, and thermal shutdown protections. Typical applications include point-of-load regulation for FPGAs, ASICs, and DSPs in optical transceivers and RF modules; DDR memory termination; telecom base-station digital rails; and any space-constrained 5V distributed-bus design where low EMI is mandatory. The compact 3mm x 3mm footprint also makes it well suited to handheld test and measurement instruments. When designing with this part, place the input capacitors as close as possible to the VIN and GND pins, use a 0.47µH to 1µH low-DCR shielded inductor, and ensure the exposed pad has at least 4 thermal vias to the inner ground plane. The Silent Switcher 2 architecture eliminates many PCB layout EMI pitfalls but does not eliminate the need for a proper input capacitor return path.

RFQ پەیوەندی
LTC3310SIV-1#TRMPBF - 10A, 5.5V Sync Step-Down Silent Switcher 2 | ADI
LTC3310SIV-1#TRMPBF

LTC3310SIV-1#TRMPBF - 10A, 5.5V Sync Step-Down Silent Switcher 2 | ADI

The Analog Devices LTC3310SIV-1#TRMPBF is a 10 A monolithic synchronous step-down DC/DC converter with a fixed 1 V output, housed in an 18-lead 3 mm x 3 mm LQFN exposed-pad package. It accepts a 2.25 V to 5.5 V input rail and employs the proprietary Silent Switcher 2 architecture with internal hot-loop bypass capacitors to minimize radiated EMI. What is a synchronous buck converter? A synchronous buck (step-down) DC/DC converter is a switching regulator that uses two MOSFETs - one high-side and one low-side - to convert a higher DC input voltage into a lower DC output voltage with very high efficiency. Compared to a non-synchronous buck that uses a diode for the low-side path, synchronous designs replace the diode with a MOSFET, eliminating the diode forward drop and pushing peak efficiencies above 95%. Buck converters sit within the broader hierarchy of voltage regulators -> DC-DC converters -> power management ICs -> power semiconductors, and are the workhorse topology for point-of-load conversion in nearly every digital system. Key features include 10 A continuous output current, sub-1 uA quiescent current in Burst Mode operation, fixed 1 V output (LTC3310SIV-1 variant), internal compensation, and a programmable switching frequency up to 5 MHz. The Silent Switcher 2 architecture also enables clean switching edges that easily meet CISPR 25 Class 5 automotive EMI limits, even with a 2-layer PCB. The LTC3310S architecture integrates the top and bottom power MOSFETs, the bootstrap capacitor, and hot-loop bypass capacitors inside the package, dramatically shrinking the external component count. The IV (industrial, 3 mm x 3 mm LQFN) package delivers thermally efficient power handling - typical applications sustain 10 A continuously with proper PCB copper area and no external heatsink. Typical applications include automotive infotainment and ADAS point-of-load rails, FPGA/ASIC/SoC core and I/O supplies, optical transceiver modules, high-current serial bus power (PCIe, multi-gigabit transceivers), and post-regulation stages following a 5 V or 3.3 V system rail. When designing with this device, prioritize a low-impedance ground plane and follow the reference PCB layout in the manufacturer datasheet exactly - Silent Switcher 2 is sensitive to high-frequency loop inductance. For light-load efficiency, enable Burst Mode; for lowest output ripple, select forced-continuous mode.

RFQ پەیوەندی
LTC3370EUH#PBF - 4-Ch 8A Configurable Buck DC/DC | Analog Devices
LTC3370EUH#PBF

LTC3370EUH#PBF - 4-Ch 8A Configurable Buck DC/DC | Analog Devices

The LTC3370EUH#PBF from Analog Devices is a highly flexible multioutput power supply IC that integrates four synchronous buck converters, configured to share eight 1A power stages. Each converter is powered from independent 2.25V to 5.5V inputs, and the DC/DCs are assigned to one of eight power configurations via pin-programmable C1-C3 pins. The common buck switching frequency can be programmed with an external resistor, allowing designers to optimize efficiency and component size. The device is available in a 32-lead WFQFN exposed pad package (EUH suffix) and operates over the industrial temperature range of -40°C to +125°C. A multioutput buck converter is a type of DC-DC switching regulator that provides multiple regulated output voltages from a single input supply. It belongs to the broader category of power management ICs (PMICs), which manage power distribution and conversion in electronic systems. The LTC3370 is a synchronous buck converter, meaning it uses both high-side and low-side switches to achieve high efficiency, especially at lower output voltages. This architecture reduces power loss compared to asynchronous converters, making it ideal for battery-powered and energy-sensitive applications. Key features of the LTC3370EUH#PBF include four independent buck converters with a total output current of 8A (eight 1A stages), adjustable output voltages from 0.8V to 5.5V, and a wide input voltage range of 2.25V to 5.5V. The device supports eight distinct power configurations, allowing designers to allocate the 1A stages flexibly among the four outputs. The switching frequency is programmable from 1MHz to 3MHz via an external resistor, enabling trade-offs between efficiency and component size. Additionally, the LTC3370 includes internal compensation, soft-start, and overcurrent protection, simplifying design and enhancing reliability. From a technical perspective, the LTC3370 uses a current-mode control architecture with synchronous rectification, achieving efficiencies up to 95%. The eight 1A power stages can be paralleled to provide higher current on a single output, such as 4A on one output while the others are disabled. The C1-C3 pins allow configuration of the power stage assignment, providing flexibility for various load requirements. The device also features a power-good output and an enable pin for each channel, enabling sequenced power-up and fault monitoring. The 32-lead WFQFN package with exposed pad ensures excellent thermal performance, with a thermal resistance of approximately 28°C/W. Typical applications for the LTC3370EUH#PBF include portable and battery-powered devices, FPGA and DSP power supplies, solid-state drives, and industrial equipment. Its ability to provide multiple regulated rails from a single input makes it ideal for systems requiring core, I/O, and auxiliary voltages. The high efficiency and low quiescent current extend battery life in handheld devices, while the programmable frequency allows optimization for EMI-sensitive applications. When designing with the LTC3370, it is important to select appropriate external inductors and capacitors based on the switching frequency and output current. The exposed pad should be soldered to a large copper area for effective heat dissipation. Additionally, the C1-C3 pins must be configured correctly to achieve the desired power stage allocation, and the RT pin resistor sets the switching frequency. Proper layout with short, low-inductance paths for the switching nodes is critical to minimize noise and ensure stable operation.

RFQ پەیوەندی
LTC3370EUH#TRPBF - 4-Ch 8A Configurable Buck DC/DC | Analog Devices
LTC3370EUH#TRPBF

LTC3370EUH#TRPBF - 4-Ch 8A Configurable Buck DC/DC | Analog Devices

The LTC3370EUH#TRPBF is a highly flexible multioutput power supply IC from Analog Devices, featuring four synchronous buck converters that share eight 1A power stages, each powered from independent 2.25V to 5.5V inputs. The DC/DCs can be assigned to one of eight power configurations via pin-programmable C1-C3 pins, allowing designers to optimize output current distribution (e.g., 1A, 2A, 3A, or 4A per channel) without changing the PCB. The common buck switching frequency is programmable with an external resistor, and the device operates over a -40°C to 125°C junction temperature range. Housed in a 32-lead WFQFN exposed pad package (5mm x 5mm), this regulator is ideal for space-constrained, multi-rail systems. A configurable buck converter is a type of DC-DC step-down regulator that uses multiple internal power stages that can be combined to deliver higher current on fewer outputs. In the hierarchy of power management ICs, it sits above fixed-output regulators, offering flexibility in output count and current allocation. The LTC3370's architecture allows one to four outputs, each with up to 8A total, making it a versatile building block for systems requiring multiple low-voltage rails. Key features include four synchronous buck converters with up to 8A total output current, 2.25V to 5.5V input range, adjustable output voltage down to 0.8V, and pin-configurable output current sharing. The device achieves high efficiency (up to 95%) by integrating low RDS(ON) switches and supports Burst Mode operation for light-load efficiency. It also includes soft-start, short-circuit protection, and thermal shutdown. Technically, the LTC3370 uses a current-mode control architecture with a programmable switching frequency from 1MHz to 3MHz, allowing designers to trade off efficiency vs. component size. The C1-C3 pins set the configuration, and the MODE/SYNC pin allows external synchronization or Burst Mode. The device is available in a 32-lead WFQFN package with exposed pad for thermal management. Typical applications include solid-state drives, FPGA/ASIC power supplies, optical modules, and industrial equipment where multiple low-voltage rails are needed. Its wide input range and high efficiency make it suitable for battery-powered devices and point-of-load regulation. When designing with the LTC3370, ensure proper decoupling with 10µF ceramic capacitors on each input and output, and use the exposed pad for heat sinking. The switching frequency should be chosen to optimize efficiency and component size, and the C1-C3 pins must be set correctly for the desired output configuration.

RFQ پەیوەندی
LTC3370IUH#PBF - 4-Ch 8A Configurable Buck DC/DC | Analog Devices
LTC3370IUH#PBF

LTC3370IUH#PBF - 4-Ch 8A Configurable Buck DC/DC | Analog Devices

The LTC3370IUH#PBF from Analog Devices is a highly flexible multioutput power supply IC that integrates four synchronous buck converters, configured to share eight 1A power stages. Each converter is powered from independent 2.25V to 5.5V inputs, and the DC/DCs are assigned to one of eight power configurations via pin-programmable C1-C3 pins. The common buck switching frequency can be programmed with an external resistor, allowing designers to optimize efficiency and component size. Housed in a 32-lead WFQFN exposed pad package, this device delivers up to 8A total output current with a minimum output voltage of 0.8V. A multioutput buck converter is a type of DC-DC switching regulator that provides multiple regulated output voltages from a single input supply. It belongs to the broader category of power management ICs, which are essential in modern electronic systems for efficient voltage conversion. Unlike linear regulators, buck converters use switching elements to achieve high efficiency, especially when there is a large difference between input and output voltages. The LTC3370's configurable architecture allows it to replace multiple discrete regulators, saving board space and simplifying power supply design. Key features of the LTC3370IUH#PBF include its four synchronous buck converters with eight 1A power stages, which can be combined to provide various output current configurations (e.g., 4x2A, 2x4A, 1x8A). The input voltage range of 2.25V to 5.5V makes it suitable for battery-powered and low-voltage systems. The device also features a programmable switching frequency, allowing trade-offs between efficiency and component size. Additionally, it includes internal compensation, soft-start, and overcurrent protection, enhancing reliability. Technically, the LTC3370 uses a current-mode control architecture with synchronous rectification, achieving high efficiency across a wide load range. The pin-programmable configuration pins (C1-C3) allow the eight power stages to be allocated to the four outputs in different combinations, providing design flexibility. The device operates over a -40°C to 125°C junction temperature range, making it suitable for industrial and automotive environments. The WFQFN package with exposed pad aids in thermal dissipation, ensuring stable operation under full load. Typical applications include portable devices, industrial equipment, and automotive electronics where multiple low-voltage rails are required. For example, it can power FPGAs, microcontrollers, and analog front-ends from a single 5V supply. Its high efficiency and small footprint make it ideal for space-constrained designs. When designing with the LTC3370, ensure proper input and output capacitor selection to maintain stability and minimize ripple. The exposed pad should be soldered to a large copper area for effective heat sinking. Also, configure the C1-C3 pins correctly to achieve the desired output current distribution.

RFQ پەیوەندی
LTC3370IUH#TRPBF - 4-Ch 8A Configurable Buck DC/DC | Analog Devices
LTC3370IUH#TRPBF

LTC3370IUH#TRPBF - 4-Ch 8A Configurable Buck DC/DC | Analog Devices

The LTC3370IUH#TRPBF from Analog Devices is a highly flexible multioutput power supply IC that integrates four synchronous buck converters, configured to share eight 1A power stages, each powered from independent 2.25V to 5.5V inputs. The DC/DCs are assigned to one of eight power configurations via pin-programmable C1-C3 pins, enabling a wide range of output current combinations from a single 32-WFQFN package. The common buck switching frequency may be programmed with an external resistor, allowing optimization for efficiency or component size. A multioutput power supply IC is a single integrated circuit that provides multiple regulated voltage rails from one or more input supplies, commonly used in systems requiring several low-voltage rails such as FPGAs, processors, and mixed-signal designs. The LTC3370 belongs to the family of configurable multi-rail DC/DC converters, which sit within the broader category of power management ICs (PMICs) that manage power distribution, conversion, and sequencing in electronic systems. Key features include four independent synchronous buck converters with 2A maximum output per channel, a total output current of 8A, and an adjustable output voltage down to 0.8V. The device operates from a 2.25V to 5.5V input range, making it suitable for battery-powered and 5V rail applications. It offers high efficiency due to synchronous rectification, a low quiescent current of 40uA in Burst Mode operation, and a programmable switching frequency from 1MHz to 3MHz. The 32-WFQFN (5mm x 5mm) package with exposed pad provides excellent thermal performance. Technically, the LTC3370 uses a current-mode control architecture with internal compensation, simplifying the external component count. The eight power stages can be combined in various configurations (e.g., 1x8A, 2x4A, 4x2A, or asymmetric combinations) to match the load requirements of different rails. The device includes soft-start, overcurrent protection, and thermal shutdown, ensuring robust operation in demanding environments. The pin-programmable configuration eliminates the need for external resistors or digital control, reducing design complexity. Typical applications include powering FPGAs, DSPs, and microprocessors in industrial, automotive, and communications equipment, as well as portable devices requiring multiple low-voltage rails. The LTC3370's flexibility and high efficiency make it ideal for space-constrained designs where multiple point-of-load converters are needed. When designing with the LTC3370, ensure adequate input and output capacitance to maintain stability and low output ripple. The exposed pad must be soldered to a large copper area for proper heat dissipation, especially at high output currents.

RFQ پەیوەندی
LTC3370MPUH#PBF - 4-Ch 8A Configurable Buck | Analog Devices
LTC3370MPUH#PBF

LTC3370MPUH#PBF - 4-Ch 8A Configurable Buck | Analog Devices

The LTC3370MPUH#PBF is a highly flexible multioutput power supply IC from Analog Devices. It integrates four synchronous buck converters that share eight 1A power stages, each powered from independent 2.25V to 5.5V inputs. The device supports eight unique output configurations, allowing up to 4A per channel, and is pin-programmable via C1-C3 pins. Housed in a 32-lead WFQFN package with exposed pad, this regulator is designed for space-constrained, multi-rail systems. A multioutput buck converter is a type of DC-DC switching regulator that provides multiple regulated output voltages from a single input supply. It belongs to the broader category of power management ICs, which manage power distribution and conversion in electronic systems. By integrating multiple converters on one chip, it reduces component count, board area, and cost compared to discrete solutions. Key features include a wide input voltage range of 2.25V to 5.5V, adjustable output voltage down to 0.8V, and a common switching frequency programmable via an external resistor. The device achieves high efficiency through synchronous rectification and offers low total no-load supply current, making it suitable for battery-powered applications. Its flexible configuration allows designers to allocate power stages dynamically to meet varying load requirements. Technically, the LTC3370 uses a current-mode control architecture with internal compensation, ensuring stable operation across a wide range of output capacitors. The eight power stages can be combined in various parallel configurations to deliver higher current to a single output or distributed across multiple outputs. The pin-programmable C1-C3 pins simplify configuration without external components, reducing design complexity. Typical applications include portable devices, industrial equipment, and automotive systems where multiple low-voltage rails are needed. For example, it can power an FPGA core, I/O, and auxiliary circuits from a single 5V supply. Its high efficiency and low quiescent current extend battery life in handheld devices. When designing with this device, ensure proper input and output capacitor selection to maintain stability and minimize ripple. The exposed pad must be soldered to a large copper area for adequate thermal dissipation, especially at high output currents.

RFQ پەیوەندی
LTC3370MPUH#TRPBF - 4-Ch 8A Configurable Buck | Analog Devices
LTC3370MPUH#TRPBF

LTC3370MPUH#TRPBF - 4-Ch 8A Configurable Buck | Analog Devices

The LTC3370MPUH#TRPBF is a highly flexible multioutput power supply IC from Analog Devices, featuring four synchronous buck converters that share eight 1A power stages. Each power stage is powered from independent 2.25V to 5.5V inputs, and the DC/DCs can be configured into one of eight unique output configurations via pin-programmable C1-C3 pins. The device supports output currents up to 4A per channel and provides a low total no-load supply current, making it ideal for battery-powered and energy-efficient systems. A multioutput buck converter is a type of DC-DC switching regulator that integrates multiple step-down channels in a single package, allowing designers to generate several regulated voltage rails from a common input supply. This category sits within the broader hierarchy of power management ICs, which include linear regulators, charge pumps, and other switching converters. The LTC3370's configurable architecture enables it to replace multiple discrete regulators, reducing board space and component count. Key features include a wide input voltage range of 2.25V to 5.5V, eight 1A power stages that can be combined for higher current, and a programmable switching frequency set by an external resistor. The device also offers independent enable pins for each channel, soft-start, and overcurrent protection. Its 32-lead WFQFN package with exposed pad ensures excellent thermal performance, and the MP suffix indicates a -40°C to 125°C operating junction temperature range, suitable for industrial and automotive environments. The LTC3370 uses a current-mode, constant-frequency architecture with internal synchronous switches, achieving high efficiency across a wide load range. The configurable power stage assignment allows designers to optimize the number of channels and current capability for their specific application, reducing power loss and improving transient response. The device also includes a low quiescent current mode for light-load efficiency. Typical applications include point-of-load regulation in FPGA, DSP, and ASIC power supplies, as well as battery-powered portable devices, industrial instrumentation, and automotive infotainment systems. The flexible configuration and high integration make it an excellent choice for multi-rail systems where PCB space is at a premium. When designing with the LTC3370, ensure proper decoupling on each input supply and place the external frequency-setting resistor close to the RT pin. The exposed pad should be soldered to a large copper area for optimal heat dissipation, especially when operating at high output currents.

RFQ پەیوەندی
LTC3372EUH#PBF - 60V Low IQ Buck Controller + 4-Channel 8A Configurable Buck DC/DCs | Analog Devices
LTC3372EUH#PBF

LTC3372EUH#PBF - 60V Low IQ Buck Controller + 4-Channel 8A Configurable Buck DC/DCs | Analog Devices

The LTC3372EUH#PBF from Analog Devices is a highly flexible multioutput power supply IC that integrates a high-voltage (HV) step-down DC/DC switching regulator controller and four low-voltage (LV) synchronous buck converters. The HV controller drives an all N-channel synchronous power FET stage from a 4.5V to 60V input, while the four LV channels are configurable to provide up to 8A total output current. Housed in a 48-pin QFN (7x7mm) package, this PMIC is designed for space-constrained industrial, automotive, and communications systems requiring multiple regulated rails. A multioutput power management IC (PMIC) is a single device that integrates multiple voltage regulators and controllers to generate several supply rails from one input source. In the hierarchy of power management, the LTC3372 sits as a PMIC that combines a switching controller (for high-voltage step-down) with integrated buck converters (for low-voltage rails), reducing board space and component count compared to discrete solutions. This architecture is essential in systems where multiple voltages are needed, such as FPGAs, processors, and mixed-signal circuits. Key features include a 4.5V to 60V input range for the HV controller, a low quiescent current (Low IQ) for battery-powered applications, and four configurable LV buck channels that can be paralleled for higher current. The device supports spread spectrum operation for reduced EMI and includes a precision reference for accurate output regulation. The 48-QFN package with exposed pad provides excellent thermal performance, enabling high power density. Technically, the LTC3372 uses a current-mode control architecture for fast transient response and stable operation over a wide range of output capacitors. The HV controller can be configured for various topologies, including buck, boost, or buck-boost, using external FETs. The LV channels are synchronous buck converters with internal switches, offering efficiencies up to 95%. The device includes programmable switching frequency, soft-start, and power-good outputs for sequencing. Typical applications include industrial power supplies, automotive infotainment, base station power, and FPGA/processor power systems. The wide input range and configurable outputs make it ideal for systems that need to operate from 12V, 24V, or 48V buses while generating lower core voltages. When designing with the LTC3372, careful attention must be paid to the HV controller's external FET selection and gate drive layout to minimize parasitic inductance. The LV channels require proper input and output capacitance to maintain stability and low ripple. The exposed pad should be soldered to a large copper area for thermal dissipation.

RFQ پەیوەندی
LTC3372EUH#TRPBF - 60V Low IQ Buck Controller + 4-Channel 8A Configurable Buck DC/DCs | Analog Devices
LTC3372EUH#TRPBF

LTC3372EUH#TRPBF - 60V Low IQ Buck Controller + 4-Channel 8A Configurable Buck DC/DCs | Analog Devices

The LTC3372EUH#TRPBF from Analog Devices is a highly flexible multioutput power management IC (PMIC) that integrates a high-voltage (HV) step-down DC/DC switching regulator controller with four low-voltage (LV) synchronous buck converters. The HV controller drives an all N-channel synchronous power FET stage from a 4.5V to 60V input, while the four LV buck regulators are configurable to share eight 1A power stages, delivering up to 8A total output current. The device is housed in a 48-pin QFN (7x7mm) package and operates over a junction temperature range of -40°C to 125°C (with the E-grade version guaranteed from 0°C to 85°C). A PMIC (Power Management Integrated Circuit) is a highly integrated device that consolidates multiple power conversion and management functions into a single chip, such as DC/DC converters, LDOs, and battery chargers. The LTC3372 belongs to the class of multioutput switching regulators, which are essential in systems requiring multiple voltage rails from a single input supply, such as industrial, automotive, and communications equipment. By integrating a high-voltage controller and configurable low-voltage bucks, it reduces board space and component count compared to discrete solutions. Key features include a 60V input capability for the HV controller, low quiescent current (Low IQ) for improved efficiency at light loads, and pin-programmable configurations (C1-C3 pins) that allow the four LV bucks to be assigned to one of eight power configurations. The switching frequency is programmable via an external resistor, enabling optimization between efficiency and component size. The device also includes soft-start, overcurrent protection, and thermal shutdown. Technically, the LTC3372 uses a current-mode control architecture for fast transient response and stable operation. The HV controller can drive external N-channel MOSFETs, allowing high-current, high-voltage step-down conversion. The LV bucks integrate their power switches, simplifying design and reducing external component count. The pin-strapping configuration provides design flexibility without requiring I2C or SPI communication, making it suitable for standalone applications. Typical applications include industrial power supplies, automotive infotainment and ADAS systems, telecom and networking equipment, and distributed power architectures. The wide input voltage range and configurable outputs make it ideal for systems that need multiple regulated rails from a 12V or 24V bus. When designing with the LTC3372, ensure proper PCB layout with adequate ground planes and decoupling capacitors for both the HV controller and LV bucks. The switching frequency should be chosen to balance efficiency and component size, and the inductor values must be selected according to the datasheet guidelines to avoid saturation.

RFQ پەیوەندی
LTC3372IUH#PBF - 60V Low IQ Buck Controller + 4-Ch 8A Configurable Buck | Analog Devices
LTC3372IUH#PBF

LTC3372IUH#PBF - 60V Low IQ Buck Controller + 4-Ch 8A Configurable Buck | Analog Devices

The LTC3372IUH#PBF from Analog Devices is a highly flexible multioutput power supply IC that integrates a high-voltage (HV) step-down DC/DC switching regulator controller with four configurable synchronous buck converters. The HV controller drives an all N-channel synchronous power FET stage from a 4.5V to 60V input, while the four buck converters share eight 1A power stages, each powered from independent 2.25V to 5.5V inputs. This device is housed in a 48-pin QFN (7x7mm) package, offering a compact solution for complex power architectures. A multioutput power supply IC is a single integrated circuit that provides multiple regulated voltage rails from one or more input sources. It typically combines switching regulators, controllers, and sometimes LDOs to generate the various supply voltages needed by modern electronic systems. In the hierarchy of power management, a multioutput power supply IC sits above individual DC-DC converters, integrating multiple conversion channels and control logic into one package, thereby reducing board space, component count, and design complexity. Key features of the LTC3372 include a 60V input capability for the HV buck controller, low quiescent current (IQ) for improved efficiency at light loads, and eight 1A power stages that can be configured as four independent buck converters or combined for higher current outputs. The device supports a wide input voltage range, making it suitable for industrial, automotive, and telecom applications where input voltages can vary significantly. The configurable architecture allows designers to tailor the output currents and voltages to meet specific system requirements. Technically, the LTC3372 employs a current-mode control architecture for the HV controller, ensuring stable operation over a wide range of load conditions. The four buck converters use synchronous rectification to achieve high efficiency, and the power stages can be paralleled to deliver up to 8A per channel. The device includes comprehensive protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout, enhancing system reliability. The low IQ design is particularly beneficial for battery-powered applications where extending battery life is critical. Typical applications include point-of-load power supplies for FPGAs, ASICs, and processors, as well as industrial control systems, automotive infotainment, and telecom equipment. The wide input range and configurable outputs make it ideal for systems that require multiple voltage rails from a single power source. The LTC3372 simplifies power supply design by integrating multiple functions, reducing external component count and board space. When designing with the LTC3372, careful attention must be paid to the layout of the switching nodes and the placement of input and output capacitors to minimize parasitic inductance and ensure stable operation. The thermal pad should be connected to a solid ground plane to enhance heat dissipation, especially when operating at high output currents.

RFQ پەیوەندی
LTC3372IUH#TRPBF - 60V Low IQ Buck Controller | Analog Devices
LTC3372IUH#TRPBF

LTC3372IUH#TRPBF - 60V Low IQ Buck Controller | Analog Devices

The LTC3372IUH#TRPBF is a highly flexible multioutput power supply IC from Analog Devices, featuring a high-performance, high voltage (HV) step-down DC/DC switching regulator controller that drives an all N-channel synchronous power FET stage from a 4.5V to 60V input. This device integrates four low voltage (LV) synchronous buck regulators, providing a complete power management solution for a wide range of applications. The LTC3372 is designed for high efficiency and low quiescent current, making it ideal for battery-powered and energy harvesting systems. A multioutput power supply IC is a single integrated circuit that generates multiple regulated voltage rails from a single input source. It typically combines a high-voltage controller with several low-voltage synchronous buck regulators, enabling efficient power conversion for complex systems such as automotive electronics, industrial equipment, and portable devices. The LTC3372 exemplifies this category by offering both a high-voltage step-down controller and four low-voltage synchronous buck converters in a single 48-pin QFN package. Key features of the LTC3372IUH#TRPBF include a wide input voltage range of 4.5V to 60V, low quiescent current for extended battery life, and five independent output channels (one HV controller and four LV regulators). The device supports programmable output voltages and switching frequencies, allowing designers to optimize performance for specific applications. The all N-channel synchronous architecture ensures high efficiency across a wide load range, while the integrated MOSFET drivers simplify the external component count. From a technical perspective, the LTC3372 employs a current-mode control architecture for fast transient response and stable operation. The high-voltage controller can drive external N-channel MOSFETs to step down voltages as high as 60V, while the four low-voltage regulators operate from a lower input rail, typically 2.7V to 5.5V. The device includes comprehensive protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout, ensuring reliable operation in harsh environments. Typical applications for the LTC3372IUH#TRPBF include automotive power systems, industrial control equipment, and energy harvesting systems. In automotive applications, the wide input range accommodates load dump and cold crank conditions, while the low quiescent current helps meet standby power requirements. In industrial settings, the multiple outputs can power microcontrollers, sensors, and communication interfaces from a single 24V or 48V bus. For energy harvesting, the low quiescent current and high efficiency maximize the usable power from solar cells or thermoelectric generators. When designing with the LTC3372, careful attention must be paid to the layout of the high-voltage switching node and the low-voltage regulators to minimize parasitic inductance and ensure stable operation. Proper decoupling and thermal management are essential, especially when operating at high input voltages and load currents. The device's programmable features allow for flexible configuration, but designers should verify all settings against the datasheet to avoid unexpected behavior.

RFQ پەیوەندی
LTC3372MPUH#PBF - 60V Low IQ Buck Controller + 4-Channel 8A Configurable Buck DC/DCs | Analog Devices
LTC3372MPUH#PBF

LTC3372MPUH#PBF - 60V Low IQ Buck Controller + 4-Channel 8A Configurable Buck DC/DCs | Analog Devices

The LTC3372MPUH#PBF is a highly flexible multioutput power supply IC from Analog Devices. It integrates a high-performance, high-voltage (HV) step-down DC/DC switching regulator controller that drives an all N-channel synchronous power FET stage from a 4.5V to 60V input. Additionally, it includes four configurable synchronous buck DC/DC converters capable of delivering up to 8A total output current. The device is housed in a 48-pin QFN (7x7mm) package, suitable for space-constrained industrial and automotive power systems. A multioutput power supply IC is a single integrated circuit that provides multiple regulated voltage rails from one input source. It typically combines controllers and converters to generate various output voltages for complex systems like FPGAs, processors, and mixed-signal boards. The LTC3372 falls under the category of power management ICs (PMICs), specifically multi-rail DC/DC converters, which are essential for efficient power distribution in modern electronics. Key features include a wide 4.5V to 60V input range, a low quiescent current (low IQ) buck controller, and four configurable buck converters with total output current up to 8A. The device supports multiple output configurations, allowing designers to tailor the power solution to specific load requirements. Its high-voltage capability makes it suitable for industrial 24V/48V bus systems and automotive applications. Technically, the LTC3372 employs a current-mode control architecture for fast transient response and stable operation. The integrated buck controller drives external N-channel MOSFETs, enabling high-efficiency conversion at high input voltages. The four buck converters can be paralleled to increase output current or configured for different voltage rails, providing design flexibility. The device operates over a -40°C to 125°C junction temperature range, ensuring reliability in harsh environments. Typical applications include industrial power supplies, automotive body electronics, telecom and networking equipment, and distributed power architectures. The wide input range and multiple outputs make it ideal for powering FPGAs, microprocessors, and mixed-signal systems that require multiple low-voltage rails from a higher-voltage bus. When designing with the LTC3372, careful attention must be paid to PCB layout for the high-current paths and the switching nodes. Proper decoupling and thermal management are essential to achieve optimal performance and reliability.

RFQ پەیوەندی
LTC3372MPUH#TR - 60V Low IQ Buck Controller + 4-Channel 8A Configurable Buck DC/DCs | Analog Devices
LTC3372MPUH#TR

LTC3372MPUH#TR - 60V Low IQ Buck Controller + 4-Channel 8A Configurable Buck DC/DCs | Analog Devices

The LTC3372MPUH#TR is a highly flexible multioutput power supply IC from Analog Devices. It integrates a high-performance, high-voltage (HV) step-down DC/DC switching regulator controller that drives an all N-channel synchronous power FET stage from a 4.5V to 60V input. Additionally, it includes four low-voltage (LV) synchronous buck converters, each capable of delivering up to 8A of output current, configurable for various output voltage and current combinations. The device is available in a compact 44-pin QFN package, suitable for space-constrained industrial and automotive applications. A multioutput power supply IC is a single integrated circuit that provides multiple regulated voltage rails from one or more input sources. It typically combines a controller for an external high-voltage stage with integrated low-voltage converters, enabling efficient power distribution in complex systems. In the hierarchy of power management, it sits above individual DC-DC converters, offering a complete power solution that reduces component count and board space. Key features include a wide input voltage range of 4.5V to 60V for the HV controller, low quiescent current for battery-powered applications, and four configurable LV buck converters with up to 8A total output current. The device supports multiple output configurations, allowing designers to tailor the power architecture to specific needs. Its high efficiency and low IQ make it ideal for always-on systems. Technically, the LTC3372 employs a current-mode control architecture for fast transient response and stable operation. The HV controller drives external N-channel MOSFETs, enabling high-power step-down conversion from elevated input voltages. The LV converters are fully integrated with internal power switches, simplifying design and reducing external component count. The device includes comprehensive protection features such as overcurrent and overtemperature shutdown. Typical applications include industrial power supplies, automotive infotainment systems, telecom equipment, and distributed power architectures. Its ability to handle high input voltages and provide multiple regulated outputs makes it suitable for systems requiring multiple supply rails from a single source. When designing with the LTC3372, careful attention must be paid to PCB layout for the high-current paths and the HV controller's gate drive signals. Proper decoupling and thermal management are essential to ensure reliable operation at maximum load.

RFQ پەیوەندی
LTC3410ESC6 - 300mA 2.25MHz Buck Regulator | Analog Devices
LTC3410ESC6

LTC3410ESC6 - 300mA 2.25MHz Buck Regulator | Analog Devices

The Analog Devices LTC3410ESC6 is a 300 mA, 2.25 MHz synchronous step-down DC-DC regulator in a 6-lead SC70 package. It provides a positive, adjustable output down to a 0.8 V reference, uses integrated high-side and synchronous switches, and requires no external Schottky diode. Its small footprint makes it suitable for compact battery-powered, portable, communications, and embedded systems requiring efficient local rail regulation. A synchronous buck converter is a DC-DC voltage regulator that reduces a higher input voltage to a lower regulated output using inductive energy storage. The LTC3410 operates as a voltage-mode step-down regulator; its feedback reference supports low-voltage outputs, while its integrated synchronous switch improves conversion efficiency by avoiding the external catch diode used by older non-synchronous buck designs. The switching frequency is 2.25 MHz, which helps keep passive components small. Key verified features include one adjustable output, a 300 mA output-current rating, a 0.8 V output reference, and operation in the SC70 package identified by distributors as 6-TSSOP, SC-88, or SOT-363. The adjustable topology supports multiple rail requirements when the feedback divider is selected for the target voltage. The internal synchronous switch eliminates an external Schottky diode, reducing board area and assembly complexity. The datasheet also discusses inductor selection as an application-dependent tradeoff among price, size, and radiated-field or EMI requirements. Surface-mount inductors listed as suitable in the manufacturer documentation should be evaluated together with the switching frequency and output capacitance. Because the component is a switching regulator, layout quality directly affects current-loop behavior, output ripple, stability, and electromagnetic emissions. Typical uses include compact sensor nodes, portable instruments, communications modules, low-voltage digital rails, and battery-powered equipment. The 300 mA rating is suitable for moderate-load point-of-license or point-of-load conversion, not for high-current processor rails. Confirm the input range, output range, thermal limits, and compensation requirements against the complete manufacturer datasheet before finalizing a design. For layout, keep the inductor between the switching pins and the output node as recommended in the datasheet, place input decoupling close to the supply pins, and use a compact feedback loop. Verify ripple, startup behavior, load transients, and exposed-pad or ground-return arrangements in the actual board layout. This page combines verified product information, practical application guidance, and substitution constraints without inventing values not present in the supplied sources.

RFQ پەیوەندی
LTC3410ESC6-1.2 - 300mA 2.25MHz Buck Regulator | ADI
LTC3410ESC6-1.2

LTC3410ESC6-1.2 - 300mA 2.25MHz Buck Regulator | ADI

The Analog Devices LTC3410ESC6-1.2 is a fixed 1.2V, 300mA synchronous step-down DC-DC buck regulator switching at 2.25MHz in a 6-pin SC-70 package, also identified as SC-88 or SOT-363. It accepts a 2.25V to 5.5V input range and uses a synchronous architecture to provide efficient, compact regulation. A buck converter is a switching DC-DC converter that steps a higher input voltage down to a lower regulated voltage using controlled switching of an inductor and energy-storage components. The LTC3410 belongs to the hierarchy of DC-DC converter, voltage regulator, and power-management IC. Its high switching frequency permits small inductors and capacitors, making it useful where PCB area and load-transient response are important. The main features are 300mA rated output current, fixed 1.2V operation, 2.25MHz internal switching frequency, and a 2.25V to 5.5V supply range. According to the Analog Devices product page, the LTC3410 family supports outputs from 0.8V to 5V, with the selected -1.2 suffix fixing this version at 1.2V. The family also offers high-efficiency operation, low-dropout behavior through 100% duty-cycle operation, and Burst Mode for low output ripple and reduced light-load consumption. The synchronous implementation avoids an external Schottky diode and supports compact power conversion around single-cell Li-ion systems. At a 3V input, one verified source reports up to 380mA minimum peak-switch-current capability for another listed family condition, but the specified product rating for LTC3410ESC6-1.2 remains 300mA. Designers should use the manufacturer datasheet for absolute maximum ratings, compensation details, efficiency curves, and thermal limits. Typical applications include single-cell Li-ion battery rails, portable sensors, compact wireless peripherals, low-voltage digital processors, handheld measurement equipment, and IoT devices powered from 3.3V or single-cell sources. The fixed 1.2V output is particularly useful for low-voltage core rails where space, efficiency, and predictable external component selection matter. The principal design consideration is inductor and capacitor selection around the 2.25MHz switching frequency. Keep the switching loop compact, use recommended high-frequency components, and verify output ripple, startup behavior, efficiency, and thermal performance across the intended input and load range. Pin assignments and unused-pin requirements must be checked against the manufacturer datasheet before PCB release. This page combines verified distributor and manufacturer information with focused design guidance. It also distinguishes confirmed public data from parameters that still require datasheet confirmation, helping engineers source and evaluate the regulator without inserting unverified values into a design.

RFQ پەیوەندی
LTC3410ESC6-1.875#TRPBF - 1.875V 300mA Buck Regulator
LTC3410ESC6-1.875#TRPBF

LTC3410ESC6-1.875#TRPBF - 1.875V 300mA Buck Regulator

The Analog Devices LTC3410ESC6-1.875#TRPBF is a fixed-output, 300mA synchronous step-down DC-DC converter with a 1.875V output, 2.25MHz switching frequency, and 6-pin SC-70 package. It is designed for compact systems requiring efficient regulation from a 2.5V to 5.5V input source. The converter uses an internal synchronous switch to improve efficiency and eliminate an external Schottky diode. A synchronous buck converter is a switching voltage regulator that reduces an input voltage to a lower regulated output using controlled high-frequency switching. It belongs to the DC-DC converter category, which is part of power management integrated circuits. Synchronous operation is especially useful in portable and space-constrained equipment because it can provide high conversion efficiency with fewer external components. The LTC3410ESC6-1.875#TRPBF provides a fixed 1.875V output, supports up to 300mA, and operates at approximately 2.25MHz. Verified distributor information also identifies low-ripple Burst Mode operation, a 26µA quiescent current specification, efficiency up to 96%, and output ripple around 20mV peak-to-peak under specified conditions. These characteristics suit battery-powered, sensor, portable-instrument, and embedded low-voltage rail applications. The fixed 1.875V version is appropriate when the downstream circuit requires a stable low-voltage rail without external feedback adjustment. The 6-pin SC-70 package minimizes board area, while the high switching frequency helps keep passive components compact. Designers should verify inductor selection, capacitor ripple current, thermal conditions, and startup behavior against the manufacturer datasheet for the intended VIN, VOUT, and load conditions. This page summarizes verified manufacturer and distributor information, practical application guidance, comparison criteria, and drop-in alternatives that may help engineers evaluate the LTC3410ESC6-1.875#TRPBF for compact low-power power designs.

RFQ پەیوەندی
LTC3630AMPDHC#PBF - 76V 500mA Sync Buck Converter | Analog Devices
LTC3630AMPDHC#PBF

LTC3630AMPDHC#PBF - 76V 500mA Sync Buck Converter | Analog Devices

The Analog Devices LTC3630AMPDHC#PBF is a high-efficiency, 76V-tolerant 500 mA synchronous step-down DC/DC converter that draws only 12 µA typical DC supply current at no load, housed in a thermally-enhanced 16-lead (5 mm x 3 mm) plastic DFN exposed-pad (DHC) package with an extended -55°C to +150°C MP-grade operating junction temperature range. It accepts a wide 4 V to 76 V input range and supports both user-adjustable output (0.8 V to VIN via external feedback resistors) and factory-programmed fixed outputs of 1.8 V, 3.3 V, and 5 V, making it a flexible point-of-load regulator for industrial, automotive, and battery-powered systems. Key specifications include 500 mA continuous output current, internal high-side and synchronous switches that eliminate the external Schottky diode, Burst Mode operation for high efficiency at light loads, and an internal feedback comparator output that allows multiple LTC3630A units to be paralleled for higher current rails. The 12 µA quiescent current makes it particularly suited to always-on applications that must conserve standby energy, while the 76 V input withstand gives significant headroom for 48 V telecom rails, 24 V industrial buses, and transient-prone automotive load-dump environments. The architecture uses a constant-frequency current-mode control loop with a precision reference and programmable or fixed internal feedback divider; the exposed die-attach pad (DFN-EP) provides a low thermal resistance path from the junction to the PCB copper, allowing sustained 500 mA output in the small DFN-16 outline. The DHC suffix indicates the 5 mm x 3 mm DFN-16 with EP, while the 'MP' prefix designates the military plastic grade with -55°C to +150°C TJ range, distinguishing it from the standard LTC3630AHDHC#PBF which is rated to -40°C to +125°C. Typical applications include 48 V telecom point-of-load conversion, 24 V industrial sensor and actuator supplies, automotive body and chassis electronics surviving load-dump transients, battery-powered metering and remote-sensor nodes with low standby budgets, distributed low-voltage rails in factory automation, and as a post-regulator following an isolated front-end supply. The 76 V input is wide enough to absorb inductive transients without a TVS clamp in many cases. When designing with this device, place the input capacitor as close as possible to the VIN and PGND pins to minimize switching-node parasitic inductance; the exposed pad must be soldered to a continuous ground copper plane that doubles as a thermal sink. Carefully evaluate output-ripple, inductor selection (typically 47 µH to 100 µH), and feedforward-cap placement per the manufacturer datasheet typical application circuit to avoid sub-harmonic instability or unexpected Burst Mode hysteresis.

RFQ پەیوەندی
LTC3633AIUFD - Dual 3A 20V Sync Buck Regulator | Analog Devices
LTC3633AIUFD

LTC3633AIUFD - Dual 3A 20V Sync Buck Regulator | Analog Devices

The Analog Devices LTC3633AIUFD is a high-efficiency dual-channel monolithic synchronous buck regulator that delivers up to 3A continuous output current per channel from a 3.6V to 20V input supply. Housed in a 28-lead 4mm × 5mm WFQFN exposed-pad package, the device uses a controlled on-time, current-mode architecture with phase-lockable switching frequency selectable from 500 kHz to 4 MHz. The two channels can be run 180 degrees out of phase to relax input and output capacitance requirements. A buck (step-down) switching regulator is a DC-DC converter that uses an energy-storage inductor and synchronous MOSFET switches to produce a lower regulated output voltage from a higher input rail with efficiencies typically above 90 percent. Synchronous buck regulators replace the external Schottky diode with an internal low-side MOSFET, reducing conduction loss and improving thermal performance at high output currents. The buck regulator category sits within the broader hierarchy of switching regulators -> DC-DC converters -> power management ICs -> semiconductor devices. Key features include 0.6V minimum adjustable output, 95 percent maximum efficiency, 1.2 mA quiescent current in Burst Mode operation, programmable soft-start, internal compensation, and a power-good indicator. Each channel supports output voltages from 0.6V to VIN and integrates high-side and low-side MOSFETs rated for 20V operation. The exposed pad provides low thermal resistance, allowing sustained 3A per channel in space-constrained PCB layouts. The LTC3633A family is offered in three output-voltage-sense variants: LTC3633A (0.6V to 6V VFB reference), LTC3633A-1 (0.6V to VIN VFB reference), and LTC3633A-2 (programmable fixed output). All variants share the same 28-pin WFQFN exposed-pad package and pinout, making them drop-in compatible for BOM flexibility. The 28-WFQFN package with thermal pad enables high-current dual-rail designs without external heatsinking at moderate duty cycles. Typical applications include distributed power systems, battery-powered instruments, point-of-load supplies, portable electronics, and FPGA/DSP/microprocessor core and I/O rails. The wide 3.6V to 20V input range suits single-cell to multi-cell lithium-ion packs as well as 5V and 12V industrial bus rails. When designing with the LTC3633AIUFD, select the inductor based on the chosen switching frequency to maintain ripple within 30 percent of peak-to-peak inductor current, and place input ceramic capacitors as close as possible to the VIN and PGND pins to minimize switching-loop inductance. This page synthesizes distributor pricing, same-brand drop-in variants, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
LTC3636EUFD - Dual 6A, 20V Sync Step-Down DC/DC | Analog Devices
LTC3636EUFD

LTC3636EUFD - Dual 6A, 20V Sync Step-Down DC/DC | Analog Devices

The Analog Devices LTC3636EUFD is a high-efficiency, dual-channel monolithic synchronous step-down (buck) DC/DC regulator delivering up to 6A per channel from a 3.1V to 20V input rail, housed in a 28-pin QFN-EP (4mm x 5mm) package with an exposed thermal pad. It uses a controlled on-time current-mode architecture with a phase-lockable switching frequency programmable from 500 kHz to 4 MHz, and an internal 2 MHz default when the RT pin is tied to INTV_CC. A synchronous buck regulator (also called a step-down converter) is a switching power topology that reduces a higher DC input voltage to a lower, regulated DC output voltage with very high efficiency by alternately storing energy in an inductor and releasing it into the load. The LTC3636EUFD belongs to the monolithic synchronous buck regulator family, sitting within the broader DC/DC converter class, the voltage regulator category, and ultimately the power management integrated circuit hierarchy used in nearly every battery-powered or point-of-load application. Key features include two independent 6A output channels, an adjustable output range from 0.6V to 5V, 95% peak efficiency, programmable soft-start, and an operating temperature range of -40C to +125C. The exposed pad package delivers low thermal resistance for continuous high-current operation, while the wide 3.1V to 20V input range makes it well suited to lithium-ion battery stacks and 12V or 5V point-of-load rails. The controlled on-time current-mode architecture provides fast transient response and allows the LTC3636EUFD to operate with very small ceramic output capacitors, simplifying board layout and reducing BOM cost. Its phase-lockable frequency can be synchronized to an external clock, enabling parallel-channel interleaving to minimize input ripple when both channels are combined. Typical applications include point-of-load regulation for FPGAs, ASICs, DSPs, and microprocessors from 12V or 5V buses, industrial distributed power systems, battery-powered portable equipment, and multi-rail telecom/datacom boards where two independent high-current low-voltage rails are required from a common input source. When designing with the LTC3636EUFD, select low-ESR ceramic input and output capacitors rated for the worst-case ripple current, and place the inductor close to the SW node to minimize switching losses and EMI. The exposed pad must be soldered to a sufficiently large copper pour for thermal dissipation at 6A continuous load. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the standalone manufacturer datasheet.

RFQ پەیوەندی
LTC3786EMSE#TRPBF - 38V Sync Boost Controller, 1A Driver | ADI
LTC3786EMSE#TRPBF

LTC3786EMSE#TRPBF - 38V Sync Boost Controller, 1A Driver | ADI

The Analog Devices LTC3786EMSE#TRPBF is a high-performance synchronous boost converter controller that drives all N-channel power MOSFETs from a 4.5V to 38V input, packaged in a thermally-enhanced 16-MSOP-EP (MSE) with exposed pad. It operates at user-programmable switching frequencies from 105 kHz to 760 kHz, or can be synchronized to an external PLL clock, and provides one positive output suitable for boost, flyback, or SEPIC topologies. The internal 1.2V reference and PLLIN/MODE pin enable Burst Mode, pulse-skipping, or forced continuous inductor current modes at light load. It includes a power-good output indicator, programmable soft-start on the SS pin, and a robust MOSFET gate driver stage sized for high-current applications. A synchronous boost DC-DC controller is a current-mode PWM controller that uses an external N-channel MOSFET for the synchronous rectifier instead of a Schottky diode, significantly improving efficiency at high currents and reducing thermal dissipation. Controllers sit between simple switching regulators (which integrate the power switches) and discrete analog PWM implementations (which require extensive external compensation), offering a balance of flexibility and integration. Within power management ICs, this part belongs to the DC-DC switching controller family, used when output voltages exceed the input rail or when high step-up ratios are required. Key specifications include a wide 4.5V to 38V input voltage range, an output voltage that can be set up to 60V (limited by external MOSFET rating), a precision 1.2V ±1% reference, sub-100 µA Burst Mode quiescent current, and integrated bootstrap supply for the high-side gate driver. The constant-frequency current-mode architecture provides cycle-by-cycle current limiting and easy loop compensation. The MSOP-EP package features an exposed die-attach pad, reducing θJA for better thermal performance at high gate-drive power levels. The PLLIN/MODE pin accepts an external clock for noise-sensitive multi-rail systems. Typical applications include high-power LED drivers, automotive start-stop systems (where the battery drops to 4.5V and requires boosting back to 12V or higher), battery-powered industrial equipment, PFC pre-regulators, and high-voltage bias supplies for LCD/AMOLED panels, audio amplifiers, and RF power amplifiers. The wide input range also suits solar MPPT front ends and 24V industrial bus systems. When designing with the LTC3786, ensure the SS capacitor is sized to match output capacitance and inrush limits, place the boot capacitor close to the BST/SW pins, and use a low-ESR ceramic bypass on VC and VCC rails. Choose MOSFETs with appropriate VDS ratings for your maximum output voltage, and verify the inductor saturation current exceeds the peak current limit.

RFQ پەیوەندی
LTC3786IMSE#PBF - Low IQ Sync Boost Controller, 38V, MSOP-16 | ADI
LTC3786IMSE#PBF

LTC3786IMSE#PBF - Low IQ Sync Boost Controller, 38V, MSOP-16 | ADI

The Analog Devices (formerly Linear Technology) LTC3786IMSE#PBF is a high-performance synchronous boost controller IC that drives all N-channel power MOSFETs, housed in a 16-pin MSOP-EP (Exposed Pad) package. Operating as a Step-Up, Step-Up/Step-Down DC-DC controller, it supports boost, flyback, and SEPIC topologies from a 4.5V to 38V input range with adjustable output voltage up to 60V. Its switching frequency is programmable from 50 kHz to 900 kHz, and the quiescent current is specified at 55 uA. A boost converter controller is a type of DC-DC switching controller IC that falls within the power management semiconductor family. In the system hierarchy it sits between the discrete MOSFETs/inductor and the digital load - it is a controller (not a converter), meaning external pass elements are required. Synchronous rectification (using an N-channel MOSFET in place of a Schottky diode) increases efficiency, reduces power losses, and eases thermal requirements compared with asynchronous boost designs, allowing the LTC3786IMSE#PBF to deliver higher output current than diode-rectified alternatives of similar size. Key features include 55 uA quiescent current for battery-friendly operation, 5 A output current capability, an output voltage range up to 60 V, a wide 4.5 V to 38 V input range, and a programmable oscillator from 50 kHz to 900 kHz. The MSOP-16-EP package offers an exposed thermal pad for low thermal resistance. The part is qualified for the industrial -40 C to +125 C junction temperature range and is lead-free (Pb-free) with RoHS compliance. The LTC3786IMSE#PBF uses a constant-frequency current-mode control architecture with cycle-by-cycle current limiting, internal soft-start, and a precision 1.200 V reference. The synchronous driver outputs allow operation at very high duty cycles needed to deliver high output voltages from low input rails, making it well suited for 12 V or 24 V industrial bus boost applications. Typical applications include boost converters for automotive and industrial 24 V systems, SEPIC adapters for USB Type-C PD sources, flyback-derived bias supplies, and battery-powered portable equipment. The wide 4.5 V to 38 V input range allows direct connection to 12 V and 24 V nominal rails. When designing with this part, pay attention to the inductor saturation current at peak load (set by the current-sense resistor and the controller's current-limit comparator), and place the BST and SW bootstrap capacitors as close as possible to the IC. The exposed pad must be soldered to a sufficiently large copper pour to keep junction temperature within the 125 C limit. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
LTC3788IGN-1 - 2-Phase Dual Sync Boost Controller | Analog Devices
LTC3788IGN-1

LTC3788IGN-1 - 2-Phase Dual Sync Boost Controller | Analog Devices

The Analog Devices LTC3788IGN-1 is a high-performance 2-phase dual output synchronous boost converter controller that drives all N-channel power MOSFETs, housed in a 28-pin SSOP (GN) package with thermally enhanced exposed pad. It operates from a 4.5V to 38V input supply range and supports output voltages up to 60V, with the -1 variant differing from the standard LTC3788 in oscillator phase and synchronization behavior. Synchronous rectification increases efficiency, reduces power losses, and eases thermal requirements, allowing the LTC3788-1 to be used in high power boost applications. A boost (step-up) DC-DC controller is a switching regulator topology whose output voltage is always greater than its input voltage. It uses an inductor, a power switch, and a rectifier to first store energy in the inductor then release it into the output capacitor at a higher voltage. A controller (as opposed to a converter) only provides the gate-drive and feedback signals, while the actual power devices (MOSFETs) are external to the IC. The "2-phase" architecture means two parallel power stages are operated 180 degrees out of phase, which halves the input ripple current, doubles the effective ripple frequency, and reduces input capacitor stress - making it ideal for high-current applications. The "synchronous" part means the rectifier diode is replaced by a MOSFET, lowering conduction losses especially at high current and large duty cycles. Key features of the LTC3788-1 include a precision 1.2V reference, dual power good output indicators, programmable current limit, and adjustable operating frequency that can be synchronized to an external clock. The 28-SSOP package offers a compact footprint suitable for industrial power supplies, automotive systems, and battery-powered equipment where high step-up ratios are needed. The wide 4.5V to 38V input range encompasses most battery chemistries including single-cell Li-ion, multi-cell lead-acid, and 24V industrial rails. The architecture uses a peak current-mode control loop, which simplifies loop compensation, provides inherent cycle-by-cycle current limiting, and eases paralleling of multiple phases. Phase shedding at light load and adaptive dead-time control optimize efficiency across the load range. The LTC3788-1 also features soft-start programmability and output voltage tracking for multi-rail sequencing. Typical applications include high-power LED drivers, automotive start-stop systems, 24V to 48V industrial bus boost, TFT LCD bias supplies, and battery-powered portable equipment where step-up conversion is required. The dual-phase architecture especially shines in applications drawing more than 10A continuous, where single-phase solutions would require excessively large inductors. When designing with the LTC3788-1, attention to PCB layout is critical because switching nodes can exceed 60V with high di/dt. Keep the high-current loop area minimal, use a ground plane, and place input capacitors close to both MOSFET half-bridges. Use the exposed pad of the SSOP-28 GN package for proper thermal dissipation; failure to do so may cause thermal shutdown at high output power. This page synthesizes distributor pricing, datasheet specifications, pinout, drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet alone.

RFQ پەیوەندی