DC-DC Converters
بەرهەمەکان (770+)
IPD3019-760S - 19V 30W Desktop AC/DC Adapter | Inventus Power
The Inventus Power IPD3019-760S is a 30 W external desktop AC/DC adapter delivering a regulated 19 VDC output at up to 1.58 A through a 5.5 mm x 2.1 mm barrel connector. It is a Class I grounded desktop form factor, accepting a detachable IEC 60320 C14 power inlet cord (sold separately) and providing a single regulated output suitable for a wide range of 19 V nominal equipment. What is an external desktop AC/DC adapter? An external desktop AC/DC adapter (also called a "wall wart" desktop variant) is a self-contained off-line power supply housed in a plastic enclosure that sits on the desktop and converts the AC mains (100-240 VAC, 50/60 Hz) into a single low-voltage DC output. It is the product taxonomy of: AC/DC adapter -> external power supply -> power supply -> power management -> electronic component. Desktop adapters differ from wall-mount adapters in their larger size, higher power capability (typically 15-150 W), use of a Class I earthed inlet for higher safety/EMI margins, and reliance on a detachable mains cord so the same adapter can be shipped to multiple regional markets simply by changing the cord. Key features of the IPD3019-760S include a universal 100-240 VAC input range (with appropriate detachable cord set), a tightly regulated 19 VDC output at 1.58 A (30 W continuous), over-current / over-voltage / short-circuit protection per the Inventus Power adapter family platform, and a 5.5 x 2.1 mm coaxial barrel output jack. The "S" suffix designates the specific barrel connector option within the IPD3019 family. Class I grounding provides a chassis/earth ground path that improves EMI performance and user safety compared with Class II double-insulated wall-mount units of similar rating. Architecturally, the IPD3019-760S is built on Inventus Power's proven off-line flyback converter platform with primary-side regulation, secondary-side synchronous rectification, and an optocoupler-based feedback loop. The platform typically achieves >85% average efficiency at nominal line and >80% efficiency at low line, comfortably meeting the DoE Level VI efficiency requirements that govern external power supplies. The unit operates at a switching frequency that keeps fundamental switching noise outside of AM broadcast bands and provides adequate margin for conducted and radiated EMI compliance per EN 55022 Class B. Typical applications include powering 19 VDC LCD monitors, small form-factor POS terminals, 19 VDC industrial test equipment, networking gear requiring a 19 V brick, single-board computer and embedded development kits, and as a direct OEM replacement for equipment originally shipped with a 19 V 30 W desktop supply. It is a common replacement SKU for end-of-life or damaged Inventus Power supplies in field-deployed equipment. When designing with this adapter, plan for a ventilation clearance of at least 2 inches around the enclosure because the unit dissipates 5-7 W internally at full load. Verify that the load's maximum draw is below 1.58 A continuous and that the load's input voltage tolerance includes 19 V +/- 5%. Use only a detachable cord set rated for the regional mains standard. This page synthesizes distributor pricing, drop-in alternatives, and practical application notes not consolidated in any single manufacturer document.
IR38062MTRPBF - 15A Digital Sync Buck Regulator | Infineon
The Infineon IR38062MTRPBF is a 15 A single-input synchronous digital SupIRBuck buck regulator with a PMBus interface, housed in a 34-pin PQFN (5 x 7 mm) package. It integrates high-side and low-side MOSFETs plus an internal LDO that enables single 21 V operation, eliminating the need for a separate bias supply. The output voltage is adjustable from 0.5 V up to 0.875 x PVin (max 18.375 V) with 0.5 percent reference accuracy, and the switching frequency is programmable from 400 kHz to 1.5 MHz using the Rt/Sync pin or the PMBus digital interface. A buck regulator (also called a step-down DC-DC converter) is a power management IC that converts a higher DC input voltage to a lower DC output voltage with high efficiency by rapidly switching the input across an inductor and filtering the result. It belongs to the broader category of voltage regulators within power management ICs and is preferred over linear regulators whenever the input-to-output voltage differential is large, because switching conversion avoids the heavy thermal losses inherent to linear dropout regulation. Digital SupIRBuck regulators add PMBus telemetry and configuration on top of the analog PWM control loop. Key features of the IR38062MTRPBF include 15 A continuous output current, 0.5 percent reference accuracy, programmable switching frequency up to 1.5 MHz, internal soft-start, and comprehensive protection such as overcurrent, overvoltage, undervoltage, and thermal shutdown. The PMBus interface exposes voltage, current, temperature, and fault status registers, while the Rt/Sync pin allows the converter to be synchronized to an external clock or another regulator for multi-phase or noise-sensitive applications. Technically, the IR38062 uses voltage-mode control with a wide-bandwidth error amplifier, an integrated bootstrap diode, and per-cycle current limit on the low-side FET to deliver robust transient response. The 34-pin PQFN package exposes a large thermal pad to keep junction temperature rise within safe limits at full 15 A load, and the digital core allows designers to trim margining, sequencing, and fault thresholds in-circuit via PMBus without replacing components. Typical applications include POL (point-of-load) converters in telecom and networking equipment, FPGA and ASIC core/IO rails in servers and datacenters, industrial automation controllers, graphics cards, and any distributed power architecture that requires digital monitoring and tight regulation across multiple rails. When designing with this part, place input ceramic capacitors as close as possible to PVin and PGND, use the recommended inductor with low DCR for high efficiency, and connect the PMBus lines (SCL, SDA, SALERT) to a system controller for telemetry. Ensure adequate PCB copper on the thermal pad for 15 A continuous operation without exceeding the maximum junction temperature. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet, helping sourcing engineers and power designers evaluate the IR38062MTRPBF for production deployment.
IR38063MTRPBF - 25A Digital SupIRBuck PMBus POL | Infineon
The Infineon IR38063MTRPBF is a 25 A single-input synchronous buck regulator with PMBus digital interface, housed in a 34-pin PowerVFQFN (5x7 mm) package. It accepts an input voltage range of 5.5 V to 21 V and produces an adjustable output from 0.5 V to 0.875×PVin (up to 18.375 V) with 1% set-point accuracy, making it one of the highest-current density digital point-of-load (POL) converters in the SupIRBuck family. Integrated MOSFETs, a 5.2 V internal LDO bias, and PMBus telemetry for Vout/Iout/Temperature deliver a complete digital power solution in a compact footprint. A buck converter (step-down switching regulator) is a DC-DC converter topology that uses an internal high-side switch, low-side synchronous rectifier, and an LC output filter to produce a regulated lower voltage from a higher input rail. The synchronous variant replaces the traditional diode with a low-RDS(on) MOSFET to maximize efficiency. In the power management hierarchy, buck regulators sit under DC-DC converters, which in turn belong to the broader power management IC family. Digital POL converters extend this category with serial bus telemetry and programmability for adaptive voltage scaling, fault logging, and margining in advanced computing platforms. Key features of the IR38063MTRPBF include 25 A continuous output current, ±1% reference accuracy over line/load/temperature, internal current sensing with no external shunt resistor, and a switching frequency range of 200 kHz to 1.5 MHz selectable via an external resistor. Protection features include over-current (OCP), over-voltage (OVP), under-voltage (UVP), and over-temperature (OTP) protection with PMBus fault reporting. The 5x7 mm PQFN package exposes the die through a thermal pad, achieving a junction-to-ambient thermal resistance around 20 C/W with proper PCB layout. The IR38063 uses voltage-mode control with an internal MOSFET gate driver optimized for sub-100 ns transition times. The integrated bootstrap supply eliminates the external bootstrap diode, and the LDO output is brought out at Vcc for external decoupling. The result is a converter that can deliver 25 A at 1.0 V out from 12 V in at greater than 90% efficiency, with PMBus-readable Vout, Iout, and temperature telemetry enabling closed-loop adaptive voltage scaling in ASICs, FPGAs, and network processors. Typical applications include server and storage point-of-load regulation, networking ASIC and FPGA core rails, telecom base-station digital cards, and high-end computing motherboards. The PMBus interface makes it ideal for platforms requiring in-system monitoring, dynamic voltage scaling, or N+1 redundancy, where the system controller continuously polls the part's telemetry to optimize power and thermal behavior. When designing with this device, pay close attention to PCB layout: the input capacitors must be placed within 2-3 mm of the PVin and PGND pins, and the exposed pad requires a thermal via array to inner copper planes. A minimum of 2 oz copper on inner layers is recommended for full 25 A operation without thermal throttling, and the PMBus pull-up resistors should be sized according to the bus capacitance to ensure signal integrity at 400 kHz. This page synthesizes distributor pricing, drop-in same-family SupIRBuck alternatives, and PMBus design notes not found in the manufacturer datasheet alone, helping engineers evaluate the IR38063MTRPBF for next-generation digital POL designs.
IR38365MTRPBFAUMA1 - 30A OptiMOS IPOL Buck Regulator | Infineon
The Infineon IR38365MTRPBFAUMA1 is a 30A OptiMOS IPOL single-input-voltage synchronous buck regulator with on-chip PWM controller and co-packaged low-duty-cycle-optimized MOSFETs, housed in a 34-pin PowerVFQFN package. It operates from 4.5V to 16V input, delivers an adjustable output down to 0.5V, and supports an Intel Serial VID (SVID) and I2C/PMBus interface for digital power management in computing platforms. A buck regulator (also called a step-down DC-DC converter or switching regulator) is a switching power supply topology that converts a higher DC input voltage to a lower DC output voltage by chopping the input with a MOSFET switch, then smoothing with an LC filter. It belongs to the broader category of voltage regulators within power management ICs and is preferred over linear regulators when high step-down ratios or high output currents would cause unacceptable linear dissipation. Key features include 30A continuous output current in a thermally enhanced 34-pin PowerVFQFN (5x6mm) package, 0.5V to approximately 5V adjustable output voltage range via external resistor divider, internal synchronous MOSFETs using Infineon's OptiMOS technology for high efficiency (>90% at typical loads), and adaptive voltage positioning. The integrated SVID interface enables Intel-compatible VR core rail implementations without external controllers, while I2C/PMBus allows real-time telemetry of output voltage, current, and temperature. The on-chip PWM controller uses voltage-mode control with selectable switching frequency, and the device integrates protection features including over-current protection (OCP), over-voltage protection (OVP), under-voltage protection (UVP), over-temperature protection (OTP), and pre-bias startup. Telemetry parameters (VOUT, IOUT, temperature) are accessible via PMBus. The PowerVFQFN package provides a top-side thermal pad that is soldered directly to PCB copper to achieve the rated 30A continuous current without external heatsinks in properly designed boards. Typical applications include Intel VR core rails in servers, workstations and high-end desktops, ASIC and FPGA core supplies, high-current point-of-load (POL) converters in networking switches and routers, and DDR memory VDDQ termination supplies in datacom equipment. The combination of high current, small footprint, and digital interface makes it well suited for space-constrained, high-density power designs. When designing with this device, allocate sufficient PCB copper area beneath the exposed thermal pad and use the manufacturer's recommended inductor and capacitor selection to maintain ripple within 1% of VOUT. SVID/PMBus programming must follow Intel VR13/VR14 reference designs; consult the manufacturer datasheet for the exact command set and timing. This page synthesizes Infineon datasheet values, distributor stock and pricing, drop-in and same-family alternatives, and practical design notes that are not consolidated on any single distributor page.
IR3883MTRPBF - 3A 800kHz Integrated POL Buck Regulator | Infineon
The Infineon IR3883MTRPBF is a 3 A synchronous buck regulator with integrated MOSFETs, switching at a fixed 800 kHz, housed in a 16-lead PQFN (3 x 3 mm) package. It provides an adjustable output voltage from 0.5 V up to a value determined by the input rail, and operates from a wide VIN range suitable for point-of-load conversion in distributed power architectures. A buck converter (step-down switching regulator) is a DC-DC power topology that efficiently reduces a higher input voltage to a lower regulated output voltage by chopping the input with a high-side switch and smoothing the result through an LC filter. Compared with linear regulators, switching bucks dissipate far less power at large VIN-VOUT deltas, making them the preferred choice for high-current POL rails. The IR3883MTRPBF sits within the family of integrated POL regulators (Point-of-Load ICs) in the broader power management IC category, where the controller, gate drivers, and power MOSFETs are co-packaged for minimum footprint and design simplicity. Key differentiating features include Infineon's Enhanced Stability (EaSy) engine, which provides loop compensation without external RC networks and allows the use of all-ceramic output capacitors. The on-chip PWM controller plus monolithic MOSFETs form a complete synchronous buck in a 3 x 3 mm PQFN footprint, enabling high power density. Internal 5 V LDO bias supports single-rail operation, and built-in protection features (OCP, OVP, UVLO, thermal shutdown) increase system robustness. The architecture uses voltage-mode control with the EaSy compensation scheme to maintain stable operation across load and temperature variations. Synchronous rectification replaces the external Schottky diode with a low-side MOSFET, achieving higher efficiency than asynchronous buck topologies at light loads due to diode conduction loss elimination. The 800 kHz switching frequency is a deliberate balance between inductor size and switching loss. Typical applications include server and telecom POL rails, FPGA and ASIC core supplies, networking switch point-of-load conversion, DDR memory VTT rails, and industrial embedded computing modules. Its small footprint and high efficiency make it well suited for space-constrained boards where multiple POL voltages are required. When designing with the IR3883MTRPBF, place a 2.2 uF low-ESR ceramic bypass close to the VCC pin and follow Infineon's recommended inductor and output capacitor selections to remain within the EaSy stability envelope. For single-rail operation, connect VIN to PVIN directly; for an external bias, tie VIN to VCC to bypass the internal LDO. This page synthesizes distributor pricing, drop-in compatible alternatives, and practical design notes not consolidated on the manufacturer datasheet alone.
IR3889MTRPBF - 30A Sync Buck Regulator | Infineon | POL
The IR3889MTRPBF is a fully integrated synchronous buck regulator from Infineon Technologies, part of the OptiMOS IPOL (integrated point-of-load) family. It delivers up to 30A of continuous output current from a 4.3V to 17V single supply, or from 2.0V to 17V when an external VCC is supplied, in a compact PG-IQFN-31 package measuring 5mm x 6mm. A synchronous buck converter is a DC-DC step-down regulator that uses a high-side and low-side MOSFET instead of a diode to reduce conduction losses, making it the preferred topology for high-current point-of-load conversion. The IR3889 belongs to the power management IC hierarchy: IPOL -> integrated power stage -> DC-DC converter -> voltage regulator. It integrates the PWM controller, OptiMOS power MOSFETs, and bootstrap diode, minimizing external component count. Key features include a fast Constant-On-Time (COT) control engine that eliminates complex loop compensation and achieves rapid transient response, stability with ceramic output capacitors, and a precision 0.8V +/-0.5% reference. The output voltage is adjustable from 0.5V to 0.875 x VIN. Technically, the enhanced COT scheme simplifies design while providing fast control response to load steps typical of FPGA and processor cores. The integrated OptiMOS FETs deliver high efficiency at 30A, and the QFN exposed pad provides low thermal resistance for heat extraction into the PCB copper pour. Typical applications include 30A POL rails for networking switches, servers, storage systems, and telecom infrastructure powering FPGAs, ASICs, and DSPs. Pricing starts at approximately $1.82 (as of 2026-08-29, LCSC). Design tip: solder the exposed pad to a large copper area; at 30A loads, thermal management and minimum output capacitance per the datasheet are critical for stability.
IS6605A - 6A Synchronous Buck Converter 4-16V Input | Innovisionsemi
The Innovisionsemi IS6605A is a high-efficiency, single-channel, FET-integrated synchronous buck (step-down) DC-DC converter that delivers up to 6 A of continuous output current from a 14-pin WFQFN (2x3 mm) package. It accepts a wide 4 V to 16 V input range and produces an adjustable output from 0.6 V to 5.5 V, making it suitable for point-of-load (POL) applications in server, telecom, and similar digital systems where board area is constrained. A synchronous buck converter is a switching regulator topology that uses two MOSFETs (a high-side switch and a low-side synchronous rectifier) instead of a diode to convert a higher DC voltage to a lower DC voltage. The IS6605A integrates both FETs, the control loop, and the gate drivers inside one package, which simplifies PCB layout, reduces BOM count, and improves efficiency compared to non-synchronous buck designs that lose power in a freewheeling diode. Buck converters belong to the broader family of DC-DC switching regulators, which themselves sit inside the power management IC (PMIC) category. Key features of the IS6605A include internal compensation that removes the need for an external RC network, a PGOOD indicator for power-rail sequencing, soft-start to limit inrush current, and over-current / over-temperature / under-voltage lockout protections. It supports ceramic output capacitors and requires at least 1 uF of effective (X5R/X7R) input capacitance on VCC relative to AGND per the manufacturer datasheet. Internally the device uses voltage-mode control with a fixed-frequency PWM architecture, providing predictable noise spectrum for EMI-sensitive designs. The high-side and low-side MOSFETs are optimized for 6 A continuous operation at 4-16 V VIN, enabling high full-load efficiency in compact footprints. Typical applications are POL converters for FPGA, ASIC, SoC, and DSP cores in servers and telecom boards, distributed 5 V/3.3 V/1.8 V/1.0 V rails in networking switches, fan-out power for PCIe cards, and compact 12 V-input industrial embedded boards. When designing with the IS6605A, place the input ceramic capacitor(s) as close as possible to the VIN and GND pads to minimize switching-loop parasitic inductance. Ensure the PGND and AGND are tied at a single quiet point under the IC, and follow the manufacturer's recommended inductor value and output capacitance for stable operation across the full 0.6 V to 5.5 V output range. This page synthesizes distributor pricing, drop-in compatible alternatives, application examples, and practical design notes not found in the manufacturer datasheet, helping engineers select and qualify the IS6605A faster.
ISL6215CA-T - 3-Output IMVP-3 PWM Controller | Renesas
Renesas Electronics ISL6215CA-T is a special-purpose voltage-mode PWM controller for Intel IMVP-3 three-output CPU power systems, packaged in a 28-pin SSOP/QSOP. The verified listing identifies three regulated outputs, a controller function, and a 3.90 mm-wide package; detailed electrical limits, switching frequency, phase configuration, voltage ranges, current ratings, and thermal limits were not present in the supplied data. They therefore must not be inferred from related ISL6215-family devices. A multi-phase buck PWM controller is a specialized DC-DC converter controller that coordinates several switching power stages to produce a low-voltage CPU rail from a higher-voltage input. Within the power-management hierarchy, it belongs to DC-DC converters and power-management integrated circuits. Intel IMVP-3 systems divide high-current conversion into multiple phases, allowing inductor and switching-device current to be distributed while the controller generates the required gate-drive and sequencing signals. The verified distributor record specifically describes the ISL6215CA-T as a controller for Intel IMVP-3 with three outputs. That architecture makes it relevant to legacy processor power-supply designs rather than general-purpose point-of-load or low-voltage buck regulators. The -T ordering code identifies the supplied tape-and-reel variant, but the supplied web data does not state the standard reel quantity. The package is described variously as 28-SSOP/QSOP and 28-SSOP with a 0.154-inch, 3.90 mm body width. Renesas states that the ISL6215 family is supported only for customers that have already adopted these products. That language makes lifecycle status a special concern: the part may remain orderable for installed-base support, but the provided data does not establish a broad new-design commitment. Procurement should therefore depend on manufacturer confirmation, authorized-distributor inventory, and the original platform requirements rather than treating the family as a general current-design choice. Typical uses include replacement or repair of an existing Intel Pentium 4-M or compatible IMVP-3 motherboard power system. In such equipment, the ISL6215CA-T would operate with the platform-specific MOSFETs, inductors, sensing network, and firmware-defined power states. Its suitability for a new design cannot be confirmed without the datasheet, reference circuit, operating limits, and Intel validation requirements. This page limits its claims to facts present in the verified distributor and manufacturer search results. The main design consideration is not substituting the IC blindly. IMVP-3 rails can impose exact pinout, timing, gate-drive, sensing, startup, and power-sequence requirements that generic three-output controllers may not meet. Before substitution, compare the complete 28-pin mapping, compensation method, phase count, output-voltage range, current capability, switching frequency, operating temperature, and supported Intel validation. Use the original schematic and manufacturer documentation as the controlling references. This page consolidates verified catalog descriptions, sourcing links, and strict replacement cautions beyond a basic distributor listing. It intentionally does not invent electrical specifications, pricing, pin assignments, lifecycle dates, or drop-in equivalents where the supplied evidence is absent. Those omissions are marked as data needed so engineers can distinguish verified facts from assumptions before committing to a legacy processor power supply.
ISL6216CA - 2-Phase Buck PWM Controller | Intersil
The Intersil ISL6216CA is a voltage-mode PWM controller designed for precise 2-phase buck power conversion in Intel mobile voltage-positioning platforms. The controller is packaged in a 28-pin QSOP package and operates from a power-conversion system that coordinates multiple low-voltage output rails. Its defining architecture is a two-phase voltage-mode PWM controller, intended for demanding notebook and mobile computing power supplies where dynamic regulation and transient response are important. A multi-phase buck controller is a power-management IC that regulates an output rail through coordinated switching phases. By distributing current across multiple power stages, it can improve transient performance and reduce the current burden on individual switches, inductors, and capacitors. The ISL6216CA is therefore positioned between basic single-phase PWM control and more elaborate controller architectures for high-current mobile CPU rails. The verified product information identifies the ISL6216CA as a voltage-mode PWM controller with a 2-phase configuration for Intel mobile voltage positioning. The supplied search results do not provide the complete electrical limits, switching frequency, output-voltage range, compensation method, current-limit behavior, or timing values. Those parameters must therefore be confirmed against the manufacturer datasheet before final design release. The controller is associated with Intel mobile voltage-positioning applications, where power management is required for processors operating across changing voltage and current conditions. Its multi-phase approach can help maintain a stable rail during rapid load transitions, while voltage-mode control provides a familiar control-loop structure for system designers. Exact phase-balance behavior, voltage-positioning features, and external component requirements should be checked in the datasheet and reference designs. Typical design considerations include careful placement of the controller and power-stage components, proper high-current trace sizing on the regulated rail, and selection of inductors and input/output capacitors for the target transient response. Because the available data does not include operating limits or pin names, engineers should not infer those values from generic PWM-controller families. The complete pinout, package dimensions, thermal information, and recommended compensation should be validated before PCB release. This page consolidates the verified distributor identification, datasheet links, application context, and engineering limitations for ISL6216CA. It distinguishes documented facts from parameters that still require confirmation, helping procurement and design teams identify the correct part without presenting unverified specifications as guaranteed production data.
ISL6216CA-T - 2-Phase Buck PWM Controller | Renesas
Renesas ISL6216CA-T is a voltage-mode PWM controller designed for a precise 2-phase buck converter targeting Intel Mobile Voltage Positioning systems. The controller is supplied in a 28-pin QSOP W package and is identified as an active application-specific power-management IC. Its primary role is to coordinate two converter phases, regulate the processor rail, and support the voltage-positioning functions required by mobile computing platforms. A voltage-mode PWM controller belongs to the DC-DC converter control hierarchy: it accepts feedback information from the power stage and generates control signals for external high-current switching devices. A 2-phase buck architecture divides output-current responsibility across two switching paths. Compared with a single-phase converter, this arrangement can improve transient response and reduce the amount of current handled by each switching element when the board and component values are designed appropriately. The ISL6216CA-T is identified specifically as a 28-pin QSOP W device. The QSOP W package provides a compact surface-mount solution for notebook-computer and mobile-processing power systems. The -T ordering suffix denotes the exact catalogued ISL6216CA-T configuration, while the manufacturer documentation title identifies the underlying circuit as a precise 2-phase buck PWM controller for Intel Mobile Voltage Positioning. The device operates as a dedicated PWM controller rather than as a complete switching regulator. Its implementation therefore depends on external MOSFETs, inductors, capacitors, current-sense elements, and feedback components. The controller’s phase count and voltage-mode architecture are the principal verified technical characteristics; detailed operating limits, timing values, electrical maxima, compensation method, and recommended component selections must be taken from the manufacturer datasheet before a new design is released. Typical uses include notebook-computer motherboard voltage regulation, mobile processor core-rail conversion, compact workstation power systems, and other multi-phase point-of-load architectures. The controller is most appropriate when the system designer already has experience with external power-stage layout, feedback compensation, current-sense calibration, and the electrical requirements of Intel Mobile Voltage Positioning. Design work should begin with the manufacturer’s application information and reference power-stage schematic. MOSFET selection, gate-drive timing, inductor sizing, compensation, and layout must satisfy the controller’s published limits. Because the controller drives external high-current switching paths, layout error can affect efficiency, transient behavior, and thermal performance even when the selected components meet their individual ratings. This page combines the verified controller identity, package information, application focus, lifecycle information, sourcing structure, and engineering guidance into one practical product reference. It also records where electrical details require confirmation in the official Intersil datasheet, helping engineers distinguish documented facts from design parameters that must be selected during implementation.
ISL6219CA-T - 60A 3-Phase Buck PWM Controller | Renesas
The Renesas Electronics ISL6219CA-T is a voltage-mode PWM controller for precision, multi-phase buck power conversion, with a 1.1V to 1.85V output range, up to 60A aggregate output capability, and an operating switching-frequency range of 100kHz to 1.5MHz. The device is offered in a 28-pin SSOP package. It regulates microprocessor core voltage by coordinating up to three interleaved, synchronous-rectified buck-converter channels in parallel. A multi-phase buck controller is a power-management IC that controls several synchronized switching phases to distribute load current and reduce the effective ripple current seen by the power supply. The ISL6219CA-T belongs to the voltage-mode PWM controller hierarchy, which is used to regulate low-voltage processor rails in mobile-computing systems. Its voltage-mode architecture simplifies compensation planning compared with current-mode controllers, although the compensation network must be designed for the selected output capacitance and switching frequency. The controller supports a 1.1V to 1.85V regulated output and a switching-frequency range of 100kHz to 1.5MHz. These characteristics suit applications in which a mobile processor requires a low core-voltage rail and the system designer needs flexibility between switching frequency, magnetics size, and conversion efficiency. The stated 60A capability describes the maximum multi-phase system output for which the controller is intended; external MOSFETs, inductors, capacitors, and the complete power stage determine the practical operating current. ISL6219CA is identified as a precision, multi-phase buck PWM controller for mobile applications. Its three interleaved phases can reduce input and output ripple, distribute conduction and switching losses across multiple power stages, and support higher aggregate current than a conventional single-phase regulator. Voltage-mode control provides a direct duty-cycle control path, while the external power stage allows designers to select MOSFETs and inductors according to load, efficiency, and thermal requirements. Typical uses include Intel mobile-processor core-voltage regulation, notebook computers, tablets, embedded computing platforms, and other compact systems requiring a high-current, low-voltage rail. The 1.5MHz upper switching frequency can support compact magnetics and faster transient response, while operation near 100kHz can favor lower switching loss in designs where response requirements permit it. A key design consideration is the relationship between controller settings, compensation, and the external power stage. Verify the operating-frequency range against the selected inductors, MOSFETs, and output capacitors, and follow the pin-description and application-circuit tables in the manufacturer datasheet when assigning nets and calculating compensation. This page consolidates the documented electrical envelope, package information, sourcing paths, and engineering guidance for the ISL6219CA-T. It also distinguishes the controller from similarly described devices and emphasizes the verification required when reusing an existing multi-phase power-supply layout.
ISL6439CR-T Single Synchronous Buck PWM Controller | Renesas
The Renesas Electronics ISL6439CR-T is a single synchronous buck PWM controller with voltage-mode control, a 0.8 V minimum regulated output, and a 16-QFN package measuring 5 mm by 5 mm. It drives two external N-channel MOSFETs to implement a step-down DC-DC converter for broadband gateway and similar embedded power systems. The ISL6439CR-T combines a single feedback loop, fixed-frequency operation, and integrated control and protection functions for a practical synchronous buck design. A synchronous buck controller is a PWM control IC within the DC-DC converter hierarchy. It regulates an output voltage below the input voltage by coordinating a high-side MOSFET that delivers energy to the load and a low-side synchronous rectifier that returns inductor energy during the switching off interval. Compared with a basic buck controller driving a discrete rectifier diode, this topology can reduce conduction losses while improving conversion efficiency, although component selection and layout remain critical. The ISL6439CR-T regulates the output down to 0.8 V with a maximum tolerance of ±1.5% across temperature and line-voltage variations. Its voltage-mode architecture uses a single feedback loop to support a straightforward compensation strategy. External N-channel MOSFETs provide the power-switching function, allowing the switching devices and inductor to be selected for the required output current, input range, and thermal environment rather than being fixed by the controller package. Typical applications include broadband gateway power rails, set-top boxes, cable modems, network equipment, embedded computing modules, and industrial communications equipment. The controller is particularly relevant to 12 V or 24 V input systems that require multiple lower-voltage rails for processors, memory, and network interfaces. Its fixed-frequency oscillator reduces design complexity while supporting predictable switching behavior and component selection. The primary design trade-off is that the ISL6439CR-T does not include the power MOSFETs, so the engineer must calculate high-side and low-side conduction loss, switching loss, inductor ripple current, and bootstrap capacitor requirements. The 16-QFN footprint also demands careful high-current layout to minimize parasitic inductance, while exposed-pad thermal management may be required in compact designs. This page combines manufacturer technical facts, sourcing guidance, drop-in replacement status, comparison parameters, and practical layout considerations. It helps engineers determine whether the ISL6439CR-T fits a synchronous step-down design before requesting a quote or beginning PCB implementation.
ISL6558CRZ-T - 2-4 Phase Precision Buck Controller | Renesas
The Renesas Electronics ISL6558CRZ-T is a precision multiphase PWM controller for high-current, high-slew-rate, synchronous step-down DC-DC converters, supporting two to four channels and housed in a 20-QFN package with an exposed pad. It accepts companion gate drivers including HIP6601B, HIP6602B, HIP6603B, or ISL6605. According to the verified Renesas product material, the controller regulates output voltage, balances load currents, and provides protection functions for two to four synchronous-rectified buck channels. The -T suffix identifies the supplied tape-and-reel ordering option. A multiphase PWM controller is a specialized DC-DC converter control IC that coordinates several synchronized power stages. By distributing current among multiple phases, it supports higher output current, faster transient response, and lower effective ripple than a single-phase design. The ISL6558 sits within the hierarchy of PWM controllers, voltage-regulator ICs, DC-DC converters, and power-management semiconductors. It is intended to work with external MOSFETs and companion gate drivers rather than directly supplying the converter output. The controller is designed for demanding CPU, GPU, networking, and other high-current digital rails. Renesas describes support for optional active voltage positioning, a technique that changes the converter's effective transient response through feedback or control settings. The architecture also includes current balancing and protection functions intended to improve operation across multiple power channels. Exact voltage, current, frequency, timing, and electrical limits are not present in the supplied verified excerpts and therefore must be confirmed from the manufacturer datasheet before design release. The ISL6558 can be used in two-, three-, or four-phase synchronous buck arrangements when paired with the specified companion drivers and an appropriate external MOSFET power stage. This makes it suitable for high-current, high-slew-rate applications where load steps require rapid response and low output ripple. The 20-QFN exposed-pad package also supports compact converter layouts, but exposed-pad thermal design and gate-drive layout remain critical. When designing around the ISL6558CRZ-T, follow the Renesas datasheet for compensation, current-sense implementation, gate-driver selection, MOSFET selection, and protection settings. Do not substitute a controller solely because its nominal phase count is similar; verify pin mapping, voltage ratings, timing, and compensation requirements. The device is a controller, so external gate drivers, inductors, high-current MOSFETs, and capacitors determine the converter's final output capability. This page combines the verified Renesas product description, distributor package and ordering information, datasheet references, and practical design guidance. It distinguishes confirmed information from parameters that still require datasheet confirmation, helping engineers avoid treating a general multiphase-controller description as a complete electrical specification.
ISL6558IR - Multi-Phase PWM Controller | Renesas
The Renesas Electronics ISL6558IR is a multi-phase PWM controller IC designed for high-current, high-slew-rate buck-converter systems, and the verified distributor listing identifies a positive-output step-down DC-DC controller in a 20-QFN (5x5 mm) package. It is intended to work with companion gate drivers such as HIP6601B, HIP6602B, HIP6603B, or ISL6605. The controller architecture is suited to multi-phase power conversion, where several power stages share the load and improve transient response, current sharing, and high-current delivery. The available verified data confirms the controller category and package, but does not provide the complete electrical limit set needed to state operating voltage, switching frequency, phase count, gate-drive details, or thermal ratings without qualification. A multi-phase PWM controller is a power-management semiconductor that coordinates multiple buck-converter phases. It generates control signals for external gate drivers, which in turn drive the switching devices and power inductors in each phase. Compared with a single-phase regulator, a multi-phase architecture can distribute current across multiple inductors, reduce current ripple in individual components, and increase usable output current. The ISL6558IR is therefore positioned between a basic PWM controller and a complete converter: the external gate drivers, MOSFETs, inductors, and capacitors remain necessary for the final power stage. The ISL6558IR datasheet describes it as a multi-purpose precision multi-phase PWM controller with optional active voltage positioning. The verified data identifies compatibility with four named gate-driver families, which gives a designer several implementation paths depending on the selected driver and external switching components. Active voltage positioning, when supported by the system configuration, can help shape load-droop behavior during transient events. The exact setpoint ranges, control-loop limits, fault responses, and compensation requirements must be taken directly from the manufacturer datasheet before release to production. The principal design challenge is ensuring correct phase coordination, gate-driver timing, current sharing, and layout control in a multi-phase power supply. Place the controller and its decoupling close to the associated support circuitry, keep high-current switching loops compact, and provide adequate thermal relief around the 20-QFN device and external power components. The 5x5 mm QFN package helps reduce board area, but package size alone does not establish current capability or thermal performance. Those values must be verified from the complete ISL6558 data before layout sign-off. Typical uses for the ISL6558IR include high-current server and desktop voltage rails, processor power systems, networking equipment, graphics systems, and other multiphase buck converters. It is most appropriate when the design needs several externally switched phases, precise PWM coordination, or the flexibility to select a companion gate driver. It is not a standalone regulator and should not be selected without planning the MOSFETs, inductors, current-sense elements, compensation, and gate-driver interface. A practical selection check begins with confirming the target controller package and pinout, then verifying the companion gate driver, switching frequency, phase configuration, voltage range, current capability, and protection requirements. For a replacement decision, the part must match both the footprint and the control-interface behavior; package similarity alone is insufficient. This page distinguishes verified catalog facts from parameters that still require confirmation from the manufacturer datasheet, helping engineers avoid false precision during component qualification. This page combines verified distributor identity, package information, controller function, companion-driver references, and engineering-oriented design guidance. It does not invent missing electrical specifications, pricing, lifecycle claims, compliance declarations, or unverified alternatives. For purchasing, obtain a current authorized quotation and confirm package marking, date code, and manufacturing status with the supplier.
ISL68124IRAZ-T7A - Digital 4-Phase PWM Controller | Renesas
The Renesas ISL68124IRAZ-T7A is a digital dual-output, flexible multiphase (X+Y ≤ 4) PWM controller supporting PMBus 1.3 specifications, housed in a 40-pin TQFN (5x5) package with exposed pad. Either output can be configured for any desired phase assignments up to four phases across two outputs (3+1, 2+2, 2+1, or 4+0). The controller drives an external gate driver such as the ISL66xx family and supports switching frequencies from 200 kHz to 1 MHz per phase. A digital PWM controller is an IC that regulates DC voltage in multiphase buck converter topologies by generating precisely timed pulse-width modulated signals. It belongs to the power management IC hierarchy: PWM controller -> DC-DC controller -> voltage regulator -> power management IC. Digital controllers such as the ISL68124 use a microcontroller core to implement control loops, telemetry, and PMBus communication, replacing analog compensation networks with firmware-based control and providing real-time configurability, telemetry, and adaptive voltage positioning. Key features include a 0V to 3.05V output voltage sense range per phase, programmable switching frequency up to 1 MHz, integrated MOSFET drivers are absent (external drivers required), adaptive voltage positioning, dynamic phase shedding, and full PMBus 1.3 telemetry including VIN/VOUT/IIN/IOUT/PIN/POUT/TEMP. The device supports current mode control, per-phase current sensing, and overcurrent/overvoltage/undervoltage/over-temperature fault protection with black-box recording. The ISL68124 architecture pairs Intersil's proprietary digital control loop engine with on-chip non-volatile memory for configuration storage. This eliminates the analog compensation components typical of analog PWM controllers and provides a stable control loop across a wide operating range. The device interfaces with the host through PMBus (SMBus-compatible 2-wire) for telemetry polling and configuration writes, and provides GPIO pins for system-level signaling and fault response. Typical applications include server/datacenter core VR, telecom and networking ASIC power, high-current graphics and processor rails, FPGA core supplies, and modular POL converters for distributed architectures. The flexible 4-phase capability supports high-current rails such as 240 A+ loads using appropriate external MOSFETs and inductors. When designing with this part, choose external gate drivers sized for the load current and MOSFET family. PMBus programming requires a unique device address; refer to the manufacturer datasheet for SMBus addressing, pin strap configuration, and GUI setup. External current-sense resistors or inductor DCR sensing must be sized for the per-phase current target.
ISL68137IRAZ - Digital 7-Phase PWM Controller | Renesas
The Renesas ISL68137IRAZ is a digital dual-output, flexible multiphase (X+Y ≤ 7) PWM controller with an Adaptive Voltage Scaling Bus (AVSBus) interface, housed in a 48-lead 6x6 mm QFN package. It supports any phase assignment up to seven phases across two outputs, including 6+1, 5+2, 4+2, 3+3, 3+2, or single-output 7+0 configurations. The device integrates PMBus and AVSBus interfaces for digital telemetry and adaptive voltage scaling in server, telecom, and high-end computing rails. A digital multiphase PWM controller is a power-management IC that drives multiple buck-converter phases in parallel to deliver high currents (>100 A) with fast transient response, dynamic phase adding/dropping, and per-loop digital compensation. The ISL68137 belongs to the voltage regulator controller family, specifically the multiphase PWM controller category, sitting above power-stage DrMOS/MOSFETs and below the system PMBus master in the power tree hierarchy. Key features include on-chip nonvolatile memory for storing user-selected configuration via pin-strap, automatic phase add/drop for efficiency across load ranges, AVSBus adaptive voltage scaling, full PMBus 1.3.1 command set, and ±0.5% output voltage accuracy across line, load, and temperature. The -40C to +85C industrial operating range supports datacom, telecom, and high-performance computing platforms. Architecturally, the device pairs a digital core with mixed-signal PWM modulators and per-loop PID compensation, allowing firmware-free, pin-strap configuration while preserving digital telemetry and fault logging. The 6x6 mm QFN-48 footprint with exposed pad provides low thermal resistance for high-phase-count designs where controller dissipation matters. Typical applications include server core/CPU VRs, DDR memory VRs, GPU and ASIC rails, networking switch PCIe/SoC rails, and industrial high-current POL converters. In any rail where >80 A is needed with adaptive voltage scaling, the ISL68137 is a strong candidate. Designers should plan for 4-layer or higher PCB stack-ups with adequate via arrays under the exposed pad, a dedicated 3.3 V bias rail for VCC, and PMBus pull-ups per the SMBus specification. Verify phase-current-sense resistor selection before committing layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
ISL68137IRAZ-T - 7-Phase Dual-Output PWM Controller | Renesas
The Renesas Electronics ISL68137IRAZ-T is a digital dual-output PWM controller for configurable X+Y multiphase buck voltage regulators, supporting up to seven total phases and an Adaptive Voltage Scaling Bus interface in a 48-lead 6 x 6 mm QFN package. The ISL68137IRAZ base device operates from -40°C to +85°C and supports flexible phase assignments including 6+1, 5+2, 4+2, 3+3, 3+2, and 7+0 configurations. Its on-chip nonvolatile memory stores user-selectable configurations, while automatic phase add and drop improves efficiency across changing load conditions. A digital multiphase PWM controller coordinates multiple high-current gate drivers to produce a low-ripple, high-efficiency CPU or processor voltage-regulator module. Unlike a single-phase regulator, a multiphase architecture distributes power delivery across parallel power stages, reducing current stress and supporting flexible rail assignments when different subsystems require separate output voltages. The ISL68137 belongs to the power-management IC hierarchy and is used where sequencing, telemetry, and rapid load transitions matter more than the simplicity of a basic voltage regulator. Key verified attributes include dual outputs, a maximum seven-phase configuration, pin-strap-selectable setup stored in on-chip nonvolatile memory, automatic phase add and drop, an AVSBus interface, and a 48-lead QFN package. The -T ordering suffix denotes the 4,000-unit tape-and-reel option, while the manufacturer package designation is L48.6x6B. Its RoHS-compliant status is explicitly identified in the Renesas part-number table. The controller is intended for high-current computing platforms requiring configurable dual-rail or combined multiphase power delivery. Pin-strap configuration allows a board to select operating parameters without an external configuration sequence, while stored settings can support platform-specific deployments. Firmware and board designers must still validate timing, fault behavior, rail sequencing, and power-stage compatibility before production use. Typical uses include CPU voltage-regulator modules, accelerator rails, multi-output server or desktop power systems, and communication equipment requiring phase-count flexibility. The X+Y architecture can combine phases on one output or divide them across two outputs as power demands change. Automatic phase control can reduce active phase count during light loads, improving conversion efficiency. Layout is critical because the device coordinates high-current switching loops. Follow the manufacturer's recommended component placement and exposed-pad thermal layout exactly, keep power-stage drive traces short, and provide clean current and return paths. Validate AVSBus connectivity, nonvolatile settings, telemetry, fault shutdown, and each rail's startup sequence across worst-case load and temperature conditions. This page consolidates verified Renesas product information, distributor availability, pricing context, and design-focused guidance. Because no publicly verified pin-for-pin replacement was identified in the supplied cross-reference results, cross-package or merely functional controllers are not presented as drop-in alternatives.
ISL68222IRAZ - Digital 5-Phase PWM Controller | Renesas | POL/DDR
The Renesas ISL68222IRAZ is a digital dual-output, 5-phase PWM controller with PMBus v1.3/AVSBus interface, supporting X+Y ≤ 5 phase assignments in a 40-pin TQFN (5x5) package. It operates as a synchronous step-down buck controller for non-isolated point-of-load (POL) and DDR memory applications, with a proprietary synthetic current modulation scheme that delivers industry-best transient response and efficiency across the full load range. A buck (step-down) DC-DC controller is a power management IC that drives external MOSFETs to convert a higher DC input voltage to a lower regulated output voltage. Digital multiphase controllers like the ISL68222IRAZ add PMBus telemetry, adaptive dead-time control, diode emulation, and automatic phase add/drop for light-load efficiency. They sit in the power management hierarchy as follows: PMIC → DC-DC controller → multiphase buck controller → voltage regulator module (VRM) for CPU/GPU/DDR rails. Key features include: support for up to five phases across two outputs (e.g., 4+1, 3+2, 3+1, 2+1, or 5+0), per-phase cycle-by-cycle current limiting with adaptive overcurrent protection, differential remote voltage sensing, ±0.5% output voltage accuracy across line/load/temperature, configurable switching frequency, AVSBus and PMBus v1.3 compliance, and extensive fault logging via SMBus. Diode emulation and automatic phase add/drop optimize light-load efficiency, while the synthetic current modulation scheme minimizes output capacitor count. The ISL68222IRAZ uses a digital core with proprietary Renesas modulation firmware, replacing analog compensation networks with adaptive digital control. This simplifies loop compensation, enables configuration changes via PMBus instead of hardware rework, and provides oscilloscope-like telemetry of VIN/VOUT/IIN/IOUT/PIN/POUT/TEMP for advanced power-system health monitoring. The 40-pin 5x5 TQFN package exposes multiple PWM outputs, current-sense inputs, and the AVSBus/PMBus/SMBus serial interfaces. Typical applications include DDR5/DDR4 memory VRPM (voltage regulation with power management), server and datacentre CPU/SoC core rails, FPGA and ASIC POL supplies, telecom base-station point-of-load converters, and high-end graphics card power. The dual-output flexibility also supports designs that need one rail for VDDQ and another for VTT termination, with phase shedding across both rails for maximum light-load efficiency. When designing with the ISL68222IRAZ, use Renesas PowerNavigator software to configure the part over PMBus and tune the per-loop PID coefficients. Place the ISL68222IRAZ close to the driver/MOSFET power stage, keep the current-sense traces short and matched, and provide adequate copper pour for the 40-pin TQFN thermal pad (this is a controller, not a power dissipator, so thermal concerns are modest). This page synthesizes distributor pricing, real drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
ISL68222IRZ - Digital Dual 5-Phase PWM Controller | Renesas
The Renesas ISL68222IRZ is a digital dual-output multiphase PWM controller supporting X+Y ≤ 5 phase assignments in a 40-pin TQFN (5x5 mm) package. It operates from a 3.3 V supply, drives external MOSFETs to implement step-down (buck) rails, and supports both PMBus v1.3 and AVSBus digital interfaces for telemetry, margining, sequencing, and fault management. According to the Renesas ISL68222/ISL68233 datasheet, the controller accepts flexible phase configurations such as 1+1, 3+1, 3+2, 4+1, or 5+0, allowing a single IC to power one or two independent POL rails. A PWM controller (also called a voltage-mode or current-mode controller IC) is the brain of a switch-mode power supply. It does not contain the power FETs themselves; instead, it generates high-frequency gate-drive signals that switch external MOSFETs, which in turn chop the input voltage into a regulated output. Multiphase controllers interleave several smaller phases instead of using one large switching stage, reducing input/output ripple, spreading thermal dissipation, and improving transient response under dynamic loads. The ISL68222IRZ belongs to the hierarchy: PWM controller -> DC-DC controller -> power management IC -> semiconductor. Key features of the ISL68222IRZ include the proprietary Renesas digital synthetic current modulation scheme, diode emulation for light-load efficiency, automatic phase add/drop across the load range, and on-chip non-volatile configuration memory. The AVSBus interface (in addition to standard PMBus) provides a high-speed, low-pin-count sideband channel used on modern server motherboards for VR13/VR14 point-of-load negotiation. The 5x5 mm TQFN-40 footprint occupies roughly 25 mm² of board area, making it suitable for dense VR areas on server, networking, and telecom boards. Typical applications include server/core-voltage rails for Intel VR13 and AMD SVI3 processors, DDR memory VDDQ/VPP termination regulators, networking ASIC and FPGA core supplies, and high-current telecom point-of-load converters. The dual-output architecture is particularly valuable when one rail powers the SoC while the second rail powers the memory subsystem, eliminating a separate controller IC. In CPU core applications, the digital interface allows firmware to optimize compensation, switching frequency, and fault thresholds per platform. When designing with the ISL68222IRZ, follow Renesas reference design layouts for the 40-TQFN exposed pad, use the Renesas PowerNavigator GUI for in-system configuration, and respect the AVSBus pull-up and timing requirements to avoid communication failures during board bring-up. A dual-output 3+1+1 configuration is common in storage controllers and AI accelerator cards where multiple independent rails share the same controller silicon. This page synthesizes distributor pricing, drop-in alternatives, application notes, and design considerations for the ISL68222IRZ that are not available on a typical DigiKey or Mouser listing. Cross-brand and same-brand equivalents listed below were verified for QFN-40 footprint and PMBus compatibility.
ISL68233IRZ - Digital Dual-Output 5-Phase PWM Controller | Renesas
The Renesas ISL68233IRZ is a digital dual-output multiphase (X+Y ≤ 5) PWM controller supporting PMBus V1.3 and AVSBus interfaces, housed in a 40-lead 5x5 mm TQFN package. It can be configured to support any phase assignments up to a maximum of five phases across two outputs (X and Y), including 4+1, 3+2, 3+1, 1+1, or a single-output 5+0 configuration, with increased power density for non-isolated intermediate bus and POL applications. A digital PWM controller is a microprocessor-supervised power-stage manager that drives external MOSFETs and dynamically adjusts switching frequency, phase count, and output voltage via firmware-configurable parameters. The ISL68233 sits within the broader hierarchy of PMBus-managed voltage regulators, which sit under DC-DC controllers, which are a subset of power management ICs used in telecom, datacom, and computing infrastructure. Key features include PMBus V1.3 and AVSBus digital interfaces for telemetry, fault reporting, and dynamic voltage scaling; pin-strappable or pin-programmable configuration for boot settings; integrated MOSFET drivers for high-current output stages; and support for adaptive dead-time control and current sharing across phases. The 40-TQFN (5x5) package minimizes board footprint while providing the thermal headroom required for multiphase current delivery. The ISL68233 employs a peak-current-mode control architecture with cycle-by-cycle current balancing between phases, enabling tight load-line accuracy and fast transient response. The digital core implements Renesas's proprietary charge-mode control loop, which compensates automatically over wide operating-condition ranges and eliminates the need for manual loop-component selection. This makes the device well-suited for dense, high-current rails such as core VCORE rails for processors, ASICs, and DDR memory. Typical applications include POL converters for telecom and datacom infrastructure, DDR memory VTT/VPP rails, server core voltage regulation, ASIC/FPGA multi-rail power, and any high-current point-of-load system requiring digital telemetry and adaptive voltage scaling. The PMBus interface simplifies compliance with adaptive voltage positioning (AVP) schemes in modern processors. When designing with this device, carefully follow Renesas's recommended external MOSFET selection and PCB layout guidelines for the 5x5 TQFN. Adequate decoupling and a Kelvin-sense connection to the inductor DCR or current-sense resistor are critical for accurate current sharing. The PMBus address and boot configuration must be set through external resistors and stored in non-volatile memory prior to first power-up. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the ISL68233 family not found in the manufacturer datasheet alone.
ISL80030AFRZ-T - 3A Sync Buck Converter 2.7-5.5V 2MHz DFN-8 | Renesas
The Renesas ISL80030AFRZ-T is a 3 A continuous synchronous step-down DC/DC converter housed in an 8-pin 2 mm × 2 mm DFN package with exposed thermal pad. It operates from a 2.7 V to 5.5 V input supply and produces an adjustable output from 0.6 V up to the input rail, switching at a fixed 2 MHz to minimize external inductor and capacitor size. Peak current-mode control with internal compensation delivers fast transient response and stable loop behavior across the full 3 A load. The ISL80030AFRZ-T variant uses forced PWM across the full load range, while the ISL80031 family automatically drops into PFM at light load to maximize efficiency. Integrated low rDS(on) PMOS high-side and NMOS low-side MOSFETs eliminate the boot capacitor, reduce external parts count, and allow 100% duty-cycle operation for low-dropout applications. The exposed pad provides a low thermal resistance path to PCB copper. According to the manufacturer datasheet, the device operates over -40 °C to +125 °C junction temperature, suits portable, point-of-load, FPGA/SoC core-rail, and space-constrained consumer applications, and consumes only microamps of quiescent current in shutdown.
ISL8200MIRZ - 10A Current-Share DC/DC Power Module | Renesas
The Renesas ISL8200MIRZ is a complete, stand-alone 10A step-down DC/DC switching power module integrating the PWM controller, power MOSFETs, inductor, and passive components into a single QFN-style surface-mount package. It accepts a 4.5V to 20V input and delivers an adjustable output from 0.6V to 6V at up to 10A continuous load current, with patented current-share architecture that allows multiple modules to be paralleled for higher currents. **Background - What is a DC/DC Power Module?** A DC/DC power module is a complete switch-mode power supply (SMPS) miniaturized into a single IC-style package. Unlike a discrete buck converter, which requires the engineer to select and lay out external MOSFETs, an inductor, and compensation components, a power module embeds all these building blocks inside the device, leaving only input/output bulk capacitors and a feedback resistor divider external. Power modules belong to the broader category of point-of-load (PoL) converters, which sit on the PCB next to the load they power (FPGA core rail, ASIC, SoC). Within the SMPS family tree, a power module sits below the buck converter hierarchy: buck converter -> step-down regulator -> PoL converter -> power module -> integrated power management IC. **Key features** of the ISL8200MIRZ include 10A continuous output current, current-share pin for parallel operation up to 60A (six modules), internal 4.5V/20V MOSFETs, internal inductor, internal feedback compensation, adjustable soft-start, power-good indicator, and over-current/over-voltage/thermal protection. The high level of integration eliminates the design and manufacturing risks associated with discrete buck implementations. **Technical architecture**: The ISL8200MIRZ uses a voltage-mode PWM controller with internal loop compensation. The internal MOSFETs and inductor are co-packaged to minimize parasitic loop inductance, achieving high efficiency (typically >90% at 5V input to 3.3V output at moderate loads) and reduced EMI. The current-share bus allows multiple ISL8200M modules to operate in master-slave configuration with ±10% current matching. **Typical applications** include datacom/telecom equipment (48V-to-PoL), FPGA/ASIC core and auxiliary rails, servers and storage area networks, and industrial point-of-load regulation. Designers favor it where PCB real estate is constrained or where rapid time-to-market outweighs the per-ampere cost of a discrete design. **Design consideration**: Place input bulk capacitors within 5 mm of the module's VIN pins to minimize parasitic inductance, and use the exposed thermal pad for both thermal dissipation and the electrical ground return. The current-share pin must be tied together on all paralleled modules; floating it disables parallel operation. **Unique value**: This page combines distributor pricing, EOL/last-time-buy status, same-family pin-compatible alternatives, and practical parallel-operation notes - information not consolidated on the manufacturer datasheet or distributor product pages.
ISL8200MIRZ-T - 10A DC/DC Power Module, 4.5-20V Input | Renesas
The Renesas ISL8200MIRZ-T is a complete 10 A current-sharing DC/DC power module that integrates a synchronous buck controller, power MOSFETs, and passives into a single 15 mm x 15 mm surface-mount QFN package. Per the manufacturer datasheet, it accepts a 4.5 V to 20 V input range and supplies an adjustable 0.6 V to 6 V output at up to 10 A continuous load current, with parallel current-share capability extending to 60 A using multiple modules. The integrated 26.5 microohm/V high-side FET achieves peak efficiencies of approximately 95% at 12 V input to 3.3 V output at moderate loads. A DC/DC power module is a fully integrated point-of-load (PoL) switching regulator that places the controller, power stage, and most passive components inside one package. Compared with discrete buck regulator designs, modules simplify PCB layout, shrink the BOM, shorten time-to-market, and provide validated thermal performance with a defined exposed thermal pad. ISL8200MIRZ-T sits within the broader taxonomy of DC/DC switching converters > switching voltage regulators > power management ICs > semiconductors. Key features include 4.5 V to 20 V wide VIN range, 0.6 V to 6 V adjustable VOUT (single resistor-set), 10 A continuous output, current-share mode for parallel operation up to 60 A, internal soft-start, thermal protection, and a PGOOD indicator. Programmable switching frequency (200 kHz to 600 kHz) supports efficiency and component-size optimization per design target. The architecture is a voltage-mode synchronous buck converter with adaptive drivers and a current-share loop. The exposed-pad QFN package provides a thermal resistance around 17 C/W (per datasheet), supporting convection-cooled operation up to ~7 W dissipation on a 4-layer JEDEC JESD51 board. Internal compensation simplifies the external BOM to a few ceramic capacitors, a single VOUT setting resistor, and an enable pull-up. Typical applications include FPGA/CPLD core and I/O voltage rails, datacom and telecom PoL supplies, baseband and DSP power, high-current ASIC rails, and industrial controller 3.3 V/5 V/6 V rails. The current-share feature also makes the part suitable for compute boards that need 30 A or more with N+1 redundancy. When designing with the ISL8200MIRZ-T, place input/output ceramic capacitors close to the module's bond-pad islands and solder the exposed pad to at least 1 square inch of 2 oz copper to keep junction temperatures within the datasheet thermal envelope. Always validate ripple at the load using actual bulk capacitors, not the minimum values shown in the schematic. This page integrates distributor pricing, pin-compatible alternatives, application guidance, and design notes not provided on the manufacturer datasheet summary, giving engineers a single source for both sourcing and design decisions.
ISL8282MFRZ - 15A PMBus Step-Down Power Module | Renesas
The Renesas ISL8282MFRZ is a PMBus-enabled 15A hybrid digital step-down DC/DC power module with a 4.5V to 16.5V input voltage range, a 0.5V to 5V adjustable output range, and up to 95% conversion efficiency, housed in a compact HDA-83 (11x12 mm) power module package. A DC/DC step-down (buck) power module is a voltage regulator that integrates the controller, power MOSFETs, gate drivers, and inductor into a single packaged unit. Within the power management IC hierarchy, power modules sit above discrete controllers because they eliminate the most difficult part of buck converter design - power stage layout and magnetics selection - delivering a verified reference design in one solderable component. Key features include 15A continuous output current from a single channel, PMBus/SMBus digital control and telemetry for remote configuration and monitoring, proprietary Renesas R4 Technology control architecture for fast transient response, and integrated LDOs that supply clean internal bias rails and simplify external power tree design. The wide 0.5V to 5V output range covers core rails, I/O rails, and DDR memory VTT-adjacent supplies. Technically, the hybrid digital architecture combines the accuracy of a digital control loop with the power density of an integrated power stage, achieving up to 95% peak efficiency while minimizing the external component count. Digital telemetry enables output voltage, current, temperature, and fault-status readback over PMBus, supporting system health monitoring in server and networking platforms. Typical applications include data center server CPU and ASIC power, networking switch line cards, storage systems, and industrial baseboards where a compact, monitored 15A rail is required. The high power density suits space-constrained boards that would otherwise need multi-component discrete buck stages. Design consideration: verify thermal derating at full 15A load - power modules concentrate dissipation in one footprint, so PCB copper pour area and airflow per the manufacturer thermal application guidance are essential for reliable junction temperatures. This page synthesizes distributor availability data, PMBus feature analysis, and drop-in replacement guidance not found in the manufacturer datasheet.