بەرهەمەکان (46,000+)

AD571SD/883B - 10-Bit A/D Converter | Analog Devices | Military
AD571SD/883B

AD571SD/883B - 10-Bit A/D Converter | Analog Devices | Military

The AD571SD/883B is a complete 10-bit successive approximation analog-to-digital converter (ADC) from Analog Devices, designed for high-reliability military and aerospace applications. It integrates a precision voltage reference, clock, and comparator in a single 18-pin side-brazed ceramic DIP (SBDIP) package, offering a compact and robust solution for converting analog signals to digital data. The device accepts either unipolar (0 V to +10 V) or bipolar (-5 V to +5 V) analog inputs, selectable by grounding or opening a single pin, and provides true 10-bit accuracy with no missing codes over its full operating temperature range of -55°C to +125°C. An analog-to-digital converter (ADC) is an electronic component that transforms a continuous analog voltage into a discrete digital number proportional to the amplitude of the signal. The AD571SD/883B is a successive approximation register (SAR) ADC, which uses a binary search algorithm to determine the digital output. SAR ADCs are known for their high speed and moderate resolution, making them suitable for a wide range of data acquisition systems. In the hierarchy of signal processing, the ADC sits between the analog sensor/amplifier and the digital processor, serving as the critical bridge that enables digital systems to interpret real-world analog signals. Key features of the AD571SD/883B include a 10-bit resolution, a maximum conversion time of 25 microseconds, and a parallel digital interface for easy connection to microprocessors and digital logic. The device operates from dual supplies of +5 V and -12 V or -15 V, and includes an internal clock and reference, eliminating the need for external components. The military-grade screening (883B) ensures compliance with MIL-STD-883, providing enhanced reliability for demanding environments. Technically, the AD571SD/883B employs a laser-trimmed thin-film resistor network and a high-speed comparator to achieve its accuracy. The device features a full-scale calibration capability, allowing users to adjust the gain and offset for precise measurements. The bipolar offset and unipolar offset pins provide flexibility in configuring the input range, while the differential nonlinearity is guaranteed to be within ±1 LSB over the entire temperature range. Typical applications include military avionics, radar systems, industrial process control, and high-reliability data acquisition systems. The device's wide operating temperature range and hermetic ceramic package make it ideal for harsh environments where standard commercial ADCs would fail. When designing with the AD571SD/883B, ensure that the analog input is properly buffered and that the power supplies are well-decoupled to minimize noise. The internal reference is trimmed at the factory, but external calibration may be required for absolute accuracy in critical applications.

RFQ پەیوەندی
AD572AD - 12-Bit Successive Approximation ADC | Analog Devices
AD572AD

AD572AD - 12-Bit Successive Approximation ADC | Analog Devices

The Analog Devices AD572AD is a complete 12-bit successive-approximation analog-to-digital converter with an internal clock, reference, comparator, and buffer amplifier, housed in a 32-pin through-hole DIP package. The converter supports parallel and serial data transfer, according to product listings, and uses a hybrid integrated-circuit construction that combines MSI digital circuitry with linear monolithic chips. Its high-stability thin-film resistors are actively laser trimmed to improve accuracy, repeatability, and production consistency. An ADC is a data-conversion IC that transforms a continuously varying analog voltage into a digital code for processing, measurement, or control. The AD572 belongs to the ADC hierarchy, where it is more specifically a successive-approximation converter, sometimes called a SAR ADC. Unlike a flash converter, this architecture compares the input against successively refined internal references and therefore supports relatively high resolution with a practical internal circuit arrangement. The AD572AD's principal specifications include 12-bit resolution, differential input capability, parallel and serial output options, and a 32-pin DIP package. Its internal reference and buffer amplifier reduce the number of external signal-conditioning elements required for many measurement systems. Active laser trimming of thin-film resistors helps establish stable conversion characteristics without relying on ordinary uncorrected resistor tolerances. The hybrid construction is significant because it divides the converter into digital and linear functional blocks. The MSI digital section manages conversion sequencing and data output, while the monolithic linear section supports the reference, comparator, and signal-buffer functions. This architecture allows the converter to operate as a largely complete acquisition element rather than requiring a separate clock, reference source, comparator, and input buffer. AD572AD is suited to industrial process measurement, instrumentation, laboratory data acquisition, closed-loop control, and test systems where a 12-bit conversion result and selectable parallel or serial data handling are useful. The through-hole DIP format also suits legacy industrial equipment and prototypes assembled with conventional through-hole insertion methods. Designers should follow the Analog Devices AD572 datasheet for the exact analog input range, conversion timing, logic levels, reference behavior, and recommended decoupling. Because this converter combines an internal reference with analog input conditioning, stable grounding and careful routing of the analog and digital return paths remain important. Review the complete pin description table before assigning board nets or selecting bypass-capacitor locations. This product page consolidates the known resolution, converter architecture, package, interface options, and construction details with practical sourcing, application, comparison, and design guidance. It also distinguishes verified drop-in alternatives from merely similar converters, helping engineers make package and pin-compatibility decisions before committing to a replacement.

RFQ پەیوەندی
AD572BD - 12-Bit SAR ADC | Analog Devices | SBCDIP-32
AD572BD

AD572BD - 12-Bit SAR ADC | Analog Devices | SBCDIP-32

The Analog Devices AD572BD is a complete 12-bit successive-approximation analog-to-digital converter with parallel and serial interfaces, an internal clock, internal reference, comparator, and buffer amplifier, housed in a 32-pin SBCDIP package. The converter combines digital and linear monolithic elements with active laser trimming of high-stability thin-film resistors, providing a compact, complete solution for converting analog signals into 12-bit digital data. An ADC is an interface component that translates a continuously varying voltage into a numeric representation for processing by a microprocessor, controller, FPGA, or other digital system. The AD572 belongs to the data-converter hierarchy and uses the successive-approximation, or SAR, method. In this architecture, an internal successive-approximation register compares the input against a generated reference voltage, progressively refining the result until the converted code corresponds to the analog input. The AD572 integrates functions that would otherwise require separate clock, reference, comparator, and input-buffer circuitry. Its 12-bit resolution provides 4096 possible digital output codes. Parallel output supports direct connection to digital buses, while serial output reduces the number of signal interconnects when board space or connector availability is constrained. This combination gives engineers flexibility in how the converter is interfaced to the surrounding digital system. Active laser trimming of thin-film resistors improves the stability and matching of the internal resistor network. Trimming allows calibration during manufacture to reduce offsets and improve accuracy. The hybrid IC implementation combines MSI digital circuitry with linear monolithic chips, combining digital conversion control and analog measurement functions within one device. The internal reference and buffer amplifier also reduce the number of external precision components required for basic operation. The AD572 is suitable for industrial data acquisition, process-control instrumentation, test and measurement equipment, embedded control systems, and legacy computer interfaces. It is particularly appropriate when a design requires a complete 12-bit converter with both parallel and serial outputs rather than a high-speed streaming ADC. The tube packaging and 32-pin SBCDIP outline also suit instruments and industrial systems built around through-hole analog and mixed-signal assemblies. Designers should verify signal levels against the converter's input and reference ranges, establish the correct conversion timing for the selected interface, and provide suitable bypassing around the supply and analog input pins. Because this is a conventional through-hole hybrid converter, board area and interconnect length may favor a more modern surface-mount ADC, but the AD572BD can simplify qualification of older industrial platforms. This page combines the manufacturer's product information with engineering-oriented guidance on conversion interfaces, accuracy, application fit, and design considerations. It also distinguishes verified product characteristics from details that must be confirmed in the complete Analog Devices AD572 documentation before schematic release or production use.

RFQ پەیوەندی
AD573JD - 10-Bit SAR ADC | Analog Devices | Data Acquisition
AD573JD

AD573JD - 10-Bit SAR ADC | Analog Devices | Data Acquisition

Analog Devices AD573JD is a complete 10-bit successive-approximation analog-to-digital converter with an integrated reference, clock, and comparator, operating from +5 V and -12 V or -15 V supplies in a 20-pin hermetically sealed ceramic DIP package. It converts an analog input into a 10-bit digital result with a typical successive-approximation conversion time of 20 µs and supports full or 16-bit microprocessor-bus interfacing. An ADC is an interface IC that translates a continuously varying analog voltage into a digital code for processing, measurement, or control. The AD573 belongs to the SAR ADC family, whose internal comparator repeatedly selects residual-voltage bits until the 10-bit conversion is complete. Because the AD573 includes its reference, clock, and comparator, the manufacturer describes it as a complete converter requiring no external components to perform a conversion. The AD573's principal engineering features include a 10-bit conversion resolution, no missing codes over temperature, and operation from +5 V and either -12 V or -15 V supplies. These characteristics make it suitable for instrumentation, industrial monitoring, sensor measurement, data acquisition, and embedded control systems where a compact parallel-output ADC is appropriate. The AD573 family is available in multiple package configurations, including 20-pin hermetically sealed ceramic DIP. The manufacturer product page states that AD573J and AD573K versions can also be supplied in a 20-pin plastic DIP or 20-pin leaded chip carrier. The AD573JD ordering code identifies the hermetically sealed ceramic DIP configuration, whose package is suited to demanding temperature-range and reliability environments. Typical uses include digitizing transducer outputs in industrial measurement systems, acquiring slowly changing sensor signals in data-acquisition equipment, monitoring process variables in instrumentation, and feeding sampled analog data into microprocessor-based embedded controllers. The parallel digital interface simplifies connection to systems with dedicated data and control buses, while the integrated converter functions reduce external component count. Designers should verify the complete pinout, electrical limits, timing relationships, reference behavior, input range, and bus interface against the manufacturer datasheet before layout or replacement qualification. Because the device uses a negative supply alongside +5 V, bypassing and grounding must be planned carefully. A replacement should be accepted only when its package, pin assignment, logic levels, supply requirements, conversion timing, and temperature grade are verified as compatible. This page consolidates the verified AD573JD converter characteristics, package information, application guidance, sourcing caveats, and replacement constraints. It also distinguishes verified facts from parameters that still require confirmation from the manufacturer datasheet, helping engineers avoid treating an incomplete distributor listing as a complete design specification.

RFQ پەیوەندی
AD573JN - 10-Bit SAR ADC with 20 us Conversion | Analog Devices
AD573JN

AD573JN - 10-Bit SAR ADC with 20 us Conversion | Analog Devices

Analog Devices AD573JN is a complete 10-bit successive-approximation analog-to-digital converter with a 20 us typical conversion time, packaged in a 20-pin PDIP. It integrates a DAC, voltage reference, clock, comparator, successive-approximation register, and three-state output buffers on one monolithic chip, reducing the external circuitry required for a standalone data-acquisition front end. According to the Analog Devices AD573 product page, performance is guaranteed with +5 V and either -12 V or -15 V supplies, and a version compliant with MIL-STD-883 is available. An ADC converts a time-varying analog voltage into a numerical representation for processing by a microprocessor, controller, or other digital logic. The AD573 belongs to the SAR ADC hierarchy: during each conversion, its internal DAC generates successive trial voltages for the comparator, and the successive-approximation register records the binary result. This complete converter category includes the reference, clock, comparator, SAR logic, and digital output interface in one device. Key features include 10-bit resolution, one analog input, a typical successive-approximation conversion time of 20 us, no missing codes over temperature, operation from a +5 V supply with a negative -12 V or -15 V supply, and a monolithic implementation. Separate HBE and LBE inputs enable the eight most-significant bits or the two least-significant bits for straightforward connection to narrower microprocessor buses. The AD573JN uses a parallel digital interface rather than a serial protocol. The manufacturer datasheet identifies DB9 through DB2 on pins 10 through 3, with HBE on pin 20 and LBE on pin 19; DB1 and DB0 occupy pins 2 and 1. Its integrated reference, clock, comparator, and output buffering simplify system implementation, although the negative supply requirement and parallel-bus wiring remain important constraints. Typical uses include industrial process-control instrumentation, laboratory measurement equipment, legacy microprocessor data-acquisition systems, embedded control panels, and educational analog-measurement platforms. The 20 us typical conversion time favors sampled or multiplexed measurement systems rather than high-frame-rate waveform acquisition, while the 10-bit result provides approximately 1024 addressable output codes. Designers should verify input-range, reference, timing, and logic-level details against the manufacturer datasheet before layout. Decoupling, grounding, bus timing, and unused digital outputs require careful treatment because this legacy-style converter combines analog and digital functions in one package. The cited supply configurations should be followed exactly rather than assuming conventional single-supply operation. This product record consolidates manufacturer functionality, distributor package information, interface details, and verified drop-in candidates. It also separates documented specifications from unavailable parameters, making the engineering trade-offs and replacement uncertainty explicit rather than presenting unverified values as production-ready design data.

RFQ پەیوەندی
AD573JP - 10-Bit SAR ADC with Parallel Output | Analog Devices
AD573JP

AD573JP - 10-Bit SAR ADC with Parallel Output | Analog Devices

The Analog Devices AD573JP is a complete 10-bit successive-approximation analog-to-digital converter with integrated reference, clock, comparator, successive-approximation register, DAC, and three-state output buffers, packaged in a 20-pin PLCC. It converts one single-ended analog input into a 10-bit parallel digital result. The verified product information identifies the AD573 as a 10-bit SAR ADC with a typical conversion time of 20 µs, no missing codes over temperature, and operation using +5 V and -12 V or -15 V supplies. The AD573JP is specified for 20-PLCC, 9 x 9 mm packaging and is offered by distributors as a single-input, single-channel ADC. An ADC is an analog-to-digital converter, a category of data-conversion ICs that translates a continuously varying voltage into a numeric value. The AD573's successive-approximation architecture is a complete mixed-signal subsystem rather than only a comparator or front end. Within the hierarchy of semiconductor components, the AD573JP is an ADC, then a data-converter IC, then an integrated circuit. Its internal reference and parallel bus make it useful when an embedded controller needs direct digital access without an external reference or serial conversion interface. Key features include complete 10-bit conversion, integrated voltage reference and clock circuitry, parallel microprocessor-bus-compatible output, and three-state output buffers. The converter uses a successive-approximation conversion process rather than a flash or pipeline architecture. Its parallel interface can connect directly to suitable digital bus logic or microprocessor input circuitry, reducing the need for a serial protocol. The specified power-supply arrangement supports +5 V and either -12 V or -15 V analog supplies, so the device is intended for systems able to provide the required positive and negative rails. The AD573 architecture is relevant where a moderate-resolution measurement must be acquired deterministically and presented in parallel. Because the converter includes a DAC, voltage reference, clock, comparator, SAR register, and output buffers on one chip, the system designer can focus on input conditioning, bus interfacing, timing, and reference-quality requirements. Its 10-bit resolution represents 1024 quantization levels, while the 20 µs typical conversion time provides a defined sampling interval for industrial control, instrumentation, and legacy microprocessor systems. Typical applications include industrial process measurement, laboratory instrumentation, digital panel meters, transducer signal acquisition, and embedded control systems with parallel buses. The input front end still requires careful attention to source impedance, acquisition time, input range, grounding, and noise. The positive and negative supply requirements must be checked against the system power architecture before layout begins, especially when replacing the converter with a different ADC family. A key design consideration is bus contention. The three-state outputs allow multiple devices or bus transceivers to share parallel data lines, but the system must ensure that only one output driver is enabled at a time. Input settling, conversion control, and the relationship between the internal clock and external bus timing should be verified against the manufacturer datasheet. This product page consolidates verified manufacturer and distributor information, package details, sourcing links, functional guidance, and explicitly separated uncertainties. It distinguishes documented AD573JP characteristics from parameters that require confirmation from the complete manufacturer datasheet before layout or production release.

RFQ پەیوەندی
AD573KD/+ - 10-Bit Single-Input SAR ADC | Analog Devices
AD573KD/+

AD573KD/+ - 10-Bit Single-Input SAR ADC | Analog Devices

Analog Devices AD573KD/+ is a 10-bit, single-input successive-approximation analog-to-digital converter housed in a 20-pin ceramic DIP package. The converter uses a parallel digital interface, operates from +5 V and either -12 V or -15 V supplies, and requires no external components to perform a conversion. An ADC is a data-conversion IC that converts a time-varying analog voltage into a numeric representation. The AD573 belongs to the SAR ADC hierarchy, where successive-approximation conversion compares the input against internally generated reference levels. It is used when a system needs compact, standalone conversion rather than the throughput and integration provided by a more complex high-speed converter. The principal verified specifications are 10-bit resolution, one analog input, SAR architecture, and a 20-CDIP package. Performance is guaranteed with +5 V and -12 V or -15 V supplies. The AD573KD/+ also appears as a 20-CDIP component with 2.54 mm leads, while the broader AD573 family is offered in multiple package configurations. Its digital outputs are suitable for parallel-processing systems, instrumentation, and industrial control equipment. The AD573 family is a complete converter according to the manufacturer product page, and no external components are required to perform a conversion. This simplifies analog front-end design when the available input range and acquisition rate meet the application requirements. The single-ended input arrangement also keeps the signal interface straightforward, although system-level grounding and signal conditioning remain essential for reliable measurements. Typical uses include process monitoring, industrial data acquisition, instrumentation, laboratory equipment, and embedded control systems. Designs must accommodate the converter's separate positive and negative supply requirements and interface its parallel outputs correctly to the host controller, counter, latch, or digital bus. When laying out the AD573KD/+, place the device close to the analog source and provide suitable bypass decoupling on the supply pins. The ceramic DIP package is suited to conventional through-hole assembly rather than high-density surface-mount designs. Confirm the complete pinout and timing behavior against the manufacturer datasheet before finalizing routing. This page consolidates verified manufacturer and distributor information for the AD573KD/+, adds application-focused design context, distinguishes confirmed specifications from unavailable details, and clearly records that no verified pin-to-pin substitute was found rather than presenting a merely similar converter as a drop-in replacement.

RFQ پەیوەندی
AD573KN - 10-Bit 20 us SAR ADC IC | Analog Devices
AD573KN

AD573KN - 10-Bit 20 us SAR ADC IC | Analog Devices

Analog Devices AD573KN is a complete 10-bit successive-approximation analog-to-digital converter with a 20 us typical conversion time, supplied from +5 V and -12 V or -15 V rails. The monolithic device is offered in a 20-pin PDIP package for through-hole PCB assembly and includes a reference, clock, comparator, successive-approximation register, DAC, and three-state output buffers. An ADC is a data-acquisition semiconductor that converts an analog voltage into a digital code for processing, measurement, or control. The AD573 belongs to the ADC > data converter > data-acquisition IC > semiconductor hierarchy. Its integrated reference, clock, comparator, DAC, and SAR conversion system reduce the number of external discrete functions normally required around a standalone converter, while microprocessor-interface support connects sampled measurements to digital systems. The converter provides 10-bit resolution, fast successive-approximation conversion at 20 us typical, and a full 8-bit or 16-bit microprocessor bus interface. No missing codes are specified over temperature. Operation is guaranteed with +5 V and -12 V supplies or +5 V and -15 V supplies, providing compatibility with bipolar analog input systems that require both positive and negative rails. The AD573KN combines an internal voltage reference and clock with a three-state output arrangement for bus-oriented interfacing. Its successive-approximation architecture performs binary conversion by testing successive bit weights, making it suitable for instrument-grade measurement where a sampling interval of approximately 20 us is adequate. The 20-pin PDIP package also supports conventional through-hole assembly rather than requiring a fine-pitch surface-mount footprint. Typical applications include industrial process measurement, laboratory instrumentation, digital panel meters, transducer signal acquisition, and legacy microprocessor-controlled data-collection systems. Designers commonly connect the converter to a microprocessor or programmable logic controller, assert chip select and control the conversion cycle, then read the resulting digital word through the tri-state bus. The primary design consideration is power-supply sequencing. The converter requires positive +5 V and a negative -12 V or -15 V rail, so both rails must remain within their operating limits during startup and shutdown. Decoupling should follow the manufacturer datasheet recommendations, and bus outputs should be held in a high-impedance state whenever the device is not selected. This page organizes the AD573KN technical attributes, verified source links, application guidance, and available same-family replacements into a practical engineering reference. It also separates confirmed performance facts from details that require direct verification against the relevant Analog Devices documentation before a new design is released.

RFQ پەیوەندی
AD573SD - 10-Bit 20 us SAR ADC, 20-CDIP | Analog Devices
AD573SD

AD573SD - 10-Bit 20 us SAR ADC, 20-CDIP | Analog Devices

The Analog Devices AD573SD is a complete 10-bit successive-approximation analog-to-digital converter with a typical conversion time of 20 us, one analog input, and a 20-pin ceramic DIP package. It integrates a DAC, voltage reference, clock, comparator, successive-approximation register, and three-state output buffers. According to the manufacturer data, no external components are required to perform a full-accuracy 10-bit conversion. Performance is guaranteed with +5 V and -12 V or -15 V supplies. The AD573SD uses a 20-CDIP package, while the AD573 family also includes other package configurations, so package and temperature-grade details must be checked when comparing variants. An ADC converts an analog input voltage into a digital code for measurement, control, instrumentation, and industrial signal-processing systems. The AD573 belongs to the SAR ADC family: a successive-approximation register controls an internal DAC while a comparator tests successive bit decisions. SAR converters are useful when a compact, deterministic conversion process and direct digital output are preferred over continuous delta-sigma modulation. The integrated reference, clock, comparator, and output buffers reduce external circuitry and simplify system implementation. The main verified features include 10-bit resolution, no missing codes over temperature, full or 16-bit microprocessor bus-interface capability, fast successive-approximation conversion with 20 us typical timing, operation from +5 V and -15 V supplies, and monolithic construction. The integrated design can reduce board area and assembly complexity. The parallel three-state outputs are useful when the ADC must share a processor data bus or interface directly with digital control logic. The AD573SD is suitable for industrial process measurement, data acquisition, instrumentation, test equipment, and legacy control systems requiring a deterministic parallel ADC. A 20-CDIP package provides through-hole mechanical compatibility for systems designed around ceramic DIP footprints, but it is not interchangeable with a surface-mount package without a PCB change. Supply arrangement, signal conditioning, grounding, and digital-bus timing remain important design considerations. For a new design, use the AD573SD when its 10-bit SAR architecture, integrated functions, parallel interface, and 20-CDIP footprint are specifically required. For higher resolution, different supply architecture, or surface-mount assembly, select a newer ADC whose electrical and pin requirements have been verified. This product page synthesizes verified manufacturer and distributor information, application guidance, and compatibility cautions; missing electrical values are explicitly marked rather than estimated.

RFQ پەیوەندی
AD574AJDZ - 12-Bit SAR ADC, 28-CDIP | Analog Devices
AD574AJDZ

AD574AJDZ - 12-Bit SAR ADC, 28-CDIP | Analog Devices

The Analog Devices AD574AJDZ is a complete 12-bit successive-approximation-register (SAR) analog-to-digital converter integrating a buried Zener precision reference, an internal clock, and 3-state output buffers for direct 8/16-bit microprocessor bus interface, all in a hermetic 28-pin ceramic DIP (28-CDIP) package. The J-grade device operates over -55C to +125C, and the AJDZ suffix indicates the ceramic side-brazed DIP package, J-temperature grade, and the factory die revision marking scheme. An SAR analog-to-digital converter is a type of data converter that performs a binary search across an internal capacitive DAC to digitize an analog input in N clock cycles, where N equals the converter resolution. Compared with flash, sigma-delta, and dual-slope architectures, the SAR topology combines high throughput (tens to hundreds of ksps), low latency, no pipeline delay, and excellent DC linearity - making it the dominant architecture for 12-16 bit precision measurement, industrial data acquisition, and instrumentation applications. The AD574A family is widely regarded as the industry-standard 12-bit ADC and has been in continuous production since the early 1980s. Key features of the AD574AJDZ include 12-bit resolution with 35 us maximum conversion time, factory-calibrated linearity (no missing codes), four software-configurable input ranges (0 to +10 V, 0 to +20 V, -5 to +5 V, -10 to +10 V), and 8/16-bit microprocessor bus compatibility with standard read/write control logic. The on-chip reference and clock eliminate two of the largest external component costs typical of older 12-bit ADC designs. Architecturally, the AD574A combines a precision laser-trimmed thin-film DAC, a high-speed comparator, a successive-approximation register, and a 10 V buried Zener reference - all on a single bipolar/CMOS die. This integration produces full-rated performance without user calibration, a major advantage over the modular ADC boards of the era. The hermetic 28-CDIP package supports the J-grade (-55C to +125C) temperature range required for military and aerospace programs. Typical applications include precision industrial data acquisition systems, military/aerospace avionics signal conditioning, automated test equipment (ATE), process-control front ends, and high-reliability instrumentation requiring the extended-temperature ceramic package. The wide input range and 12-bit linearity suit multi-channel multiplexed front ends with PGA conditioning. When designing with the AD574AJDZ, allocate 200 ns bus-access timing margins and place a 100 nF bypass capacitor within 5 mm of each supply pin to suppress the high-current switching transients inherent to the SAR architecture. The ceramic DIP is intended for through-hole sockets on MIL-STD-810 and MIL-PRF-38534 compliant boards; for surface-mount designs, the AD574AUD (28-SOIC) is a recommended drop-in electrical equivalent.

RFQ پەیوەندی
AD574AJE - 12-Bit ADC, 28-Pin LCC | Analog Devices
AD574AJE

AD574AJE - 12-Bit ADC, 28-Pin LCC | Analog Devices

The Analog Devices AD574AJE is a complete 12-bit successive-approximation analog-to-digital converter (SAR ADC) with integrated buried-Zener voltage reference, internal clock, and three-state output buffers, housed in a 28-terminal ceramic leadless chip carrier (LCC / QCCN / JLCC) package. The JEDEC JESD30 code QCCN denotes a square, no-lead chip-carrier package, and the JE suffix designates the commercial 0C to +70C temperature grade. An ADC (analog-to-digital converter) is a data converter that translates continuous analog signals into discrete digital codes. The AD574A family belongs to the successive-approximation register (SAR) architecture, which uses a comparator, an internal DAC, and a successive-approximation register to converge on the input voltage in N bit-clock cycles. SAR ADCs sit in the broader converter hierarchy: data converter -> ADC -> Nyquist ADC -> successive-approximation ADC -> integrated ADC with reference. They are valued for high accuracy, deterministic latency, and ease of microprocessor interfacing, making them a staple of industrial-instrumentation and process-control designs since the mid-1980s. Key features include guaranteed no-missing-codes operation over temperature, full 12-bit linearity maintained across the commercial range, and a maximum conversion time of 35 us using the on-chip clock. The integrated buried-Zener reference delivers long-term stability better than bandgap-only designs, eliminating the need for an external reference component. Three-state output buffers allow direct connection to 8- or 16-bit microprocessor data buses without additional glue logic, and standard +/-10 V or 0 V to +10 V / 0 V to +20 V analog input ranges are pin-selectable. The device implements a classic two-pass successive-approximation loop and an on-chip bipolar-offset DAC, enabling true bipolar input ranges from a single +5 V and +/-15 V analog supply. Its monolithic construction removes the calibration overhead typical of hybrid or modular ADC solutions, while the integrated clock and reference simplify PCB design and lower BOM count. Typical applications include process-control front ends, weigh-scale and load-cell digitizers, portable instrumentation, laboratory data loggers, and any 8- or 16-bit microprocessor-based measurement system requiring a complete, board-level 12-bit acquisition channel. Designers should choose the AD574AJE when a fully integrated, calibrated ADC with on-chip reference is preferred over a discrete ADC + external reference solution, and when the LCC footprint is acceptable for the assembly process.

RFQ پەیوەندی
AD574ASE/883B - 12-Bit SAR ADC, Military Grade | Analog Devices
AD574ASE/883B

AD574ASE/883B - 12-Bit SAR ADC, Military Grade | Analog Devices

The AD574ASE/883B is a complete 12-bit successive-approximation analog-to-digital converter (ADC) from Analog Devices, designed for high-reliability military and aerospace applications. It integrates a precision voltage reference, clock, and 3-state output buffers for direct interface to 8- or 16-bit microprocessor buses. The device operates over the full military temperature range of -55°C to +125°C and is available in a 28-lead ceramic LCC (11.43x11.43 mm) package, with screening to MIL-STD-883 Class B. An ADC (analog-to-digital converter) is an electronic component that converts continuous analog signals into discrete digital values. The AD574A family is a classic example of a successive-approximation register (SAR) ADC, which uses a binary search algorithm to determine the digital output. SAR ADCs are known for their good balance of speed, resolution, and power consumption, making them suitable for a wide range of data acquisition systems. The AD574A is a complete converter, meaning it includes all necessary functions on-chip, such as the reference and clock, simplifying system design. Key features of the AD574ASE/883B include 12-bit resolution, a maximum conversion time of 35 microseconds, and guaranteed no missing codes over temperature. It supports both 8-bit and 16-bit microprocessor bus interfaces, allowing flexible integration with various digital systems. The device also offers a bipolar input range of -10V to +10V, making it suitable for industrial and instrumentation applications. The military-grade screening ensures reliable operation in harsh environments. Technically, the AD574A uses a laser-trimmed thin-film resistor network and an internal reference to achieve high accuracy. The device is designed to operate without external components for the reference and clock, reducing system complexity. The 3-state output buffers allow direct connection to a data bus, and the device can be configured for either 8-bit or 16-bit data transfer. The military version (883B) undergoes additional testing and screening to meet stringent reliability standards. Typical applications include military avionics, radar systems, industrial process control, and test and measurement equipment. The wide input range and high accuracy make it ideal for precision data acquisition in harsh environments. The device's robustness and long-term availability (often through authorized distributors like Rochester Electronics) make it a preferred choice for legacy system maintenance. When designing with the AD574ASE/883B, ensure proper decoupling on the power supply pins and a clean analog ground plane to minimize noise. The reference and clock are internal, but external bypass capacitors are recommended for optimal performance. Also, consider the conversion time of 35 µs when planning system throughput.

RFQ پەیوەندی
AD574ATE/883B - 12-Bit SAR ADC, Military Grade | Analog Devices
AD574ATE/883B

AD574ATE/883B - 12-Bit SAR ADC, Military Grade | Analog Devices

The AD574ATE/883B is a complete 12-bit successive-approximation analog-to-digital converter (ADC) manufactured by Analog Devices Inc. It integrates all analog and digital functions on a single chip using Analog Devices' Bipolar/I2L process, including a high-precision voltage reference and clock, ensuring full-rated performance without external circuitry. The device features a 3-state output buffer for direct interface to an 8- or 16-bit microprocessor bus, making it ideal for industrial and military data acquisition systems. Housed in a 28-lead ceramic leadless chip carrier (LCC) with dimensions 11.43x11.43 mm, it operates over the military temperature range and is processed to MIL-STD-883C Class B standards. An analog-to-digital converter (ADC) is an electronic component that converts continuous analog signals into discrete digital numbers. The AD574A is a successive-approximation ADC, which uses a binary search algorithm to determine the digital output, offering a good balance of speed and resolution. As a 12-bit ADC, it provides 4096 discrete levels, enabling high-resolution measurement of analog signals. This device belongs to the family of data acquisition components, which are essential in bridging the analog and digital domains in systems such as industrial process control, military avionics, and scientific instrumentation. Key features of the AD574ATE/883B include 12-bit resolution, a single input channel, and a successive-approximation register (SAR) architecture. It operates from a bipolar power supply, and its parallel word access allows for fast data transfer to microprocessors. The device is available in a 28-LCC package, which is suitable for surface-mount assembly and provides good thermal and electrical performance. The military-grade processing ensures reliability in harsh environments, with a temperature grade of MILITARY, indicating operation from -55°C to +125°C. Technically, the AD574A integrates a precision voltage reference and clock on-chip, eliminating the need for external components. The Bipolar/I2L process enables high-speed operation and low power consumption. The device includes a 3-state output buffer, allowing direct connection to a microprocessor bus without additional interface logic. The conversion time is typically 25 microseconds, providing a throughput of 40 kSPS. The device also features a status output to indicate when conversion is complete, simplifying system integration. Typical applications include military avionics, industrial process control, medical instrumentation, and scientific data acquisition systems. The AD574ATE/883B is particularly suited for applications requiring high accuracy and reliability in extreme environments, such as aerospace and defense systems. Its parallel interface simplifies connection to microcontrollers and DSPs, making it a versatile choice for embedded systems. When designing with this device, ensure proper decoupling of the power supply pins and a clean analog ground to achieve specified accuracy. The reference voltage is internally generated, but external filtering may be required for optimal performance. The device is not RoHS compliant due to its military-grade hermetic package, which is a consideration for applications with environmental compliance requirements.

RFQ پەیوەندی
AD579JN - 10-Bit, 2.4 us Successive-Approximation ADC | Analog Devices
AD579JN

AD579JN - 10-Bit, 2.4 us Successive-Approximation ADC | Analog Devices

The Analog Devices AD579JN is a 10-bit, successive-approximation analog-to-digital converter with two analog input channels, a conversion time of 2.4 microseconds, and a 32-pin through-hole SBCDIP package. Designed for complete data-acquisition conversion, it combines a sampling ADC core with supporting reference and interface functions in one package. The AD579JN suffix identifies the commercial-temperature, through-hole 32-pin package configuration for procurement and PCB layout. An ADC is a data-converter semiconductor that transforms a continuously varying analog voltage into a numerical value. In the broader hierarchy, an ADC belongs to data-converter ICs alongside DACs, voltage references, and interface circuits. Successive-approximation ADCs compare the unknown input with a series of internally generated trial thresholds. This architecture is widely used when moderate resolution, deterministic conversion timing, compact size, and straightforward digital readout are more important than the extreme throughput or resolution associated with high-end flash or high-speed converters. The AD579JN provides 10-bit conversion resolution, two analog input channels, and a reported conversion time of 2.4 microseconds. These characteristics suit industrial monitoring, process-control instrumentation, laboratory measurement, and embedded control systems that need repeatable conversion of sensor outputs into digital values. The 32-pin SBCDIP package also exposes a substantial number of digital and control connections compared with compact surface-mount ADC packages. Successive-approximation operation gives the converter a familiar acquisition-and-conversion cycle. The system presents an input voltage, initiates a conversion, and reads the resulting code from the digital output interface. Control and status signals support integration into a larger measurement system, while reference and analog-input connections establish the voltage range represented by the converter. Exact timing, input ranges, logic levels, and acquisition requirements should be confirmed in the ADI datasheet before final circuit release. The AD579JN is especially relevant to designs requiring a through-hole converter with two input channels and 10-bit resolution. It can support redundant sensing, differential measurements, or multiplexed sensor conditioning when the surrounding circuitry provides the required reference and common-mode behavior. Because the device is offered in a 32-pin SBCDIP package, designers benefit from accessible leads for inspection and rework while accepting the larger board footprint of a through-hole DIP. Before layout, define the analog reference source, input range, acquisition time, conversion trigger method, and digital interface configuration. Place input and reference paths away from switching-current edges, use a stable ground reference, and route the digital outputs away from sensitive analog nodes. Check the required settling interval between selecting an input and starting conversion; adequate acquisition time is essential when the source impedance is not low. This product page combines the core AD579JN operating facts, package information, sourcing details, practical application guidance, and a disciplined replacement assessment. Engineers can use the comparison and selection information to assess whether its 10-bit resolution, two-channel architecture, 2.4 microsecond conversion time, and 32-pin through-hole package match the mechanical and measurement requirements of the target system.

RFQ پەیوەندی
AD582KD - Low-Cost Sample-and-Hold Amplifier | Analog Devices
AD582KD

AD582KD - Low-Cost Sample-and-Hold Amplifier | Analog Devices

Analog Devices AD582KD is a one-circuit sample-and-hold amplifier that combines a high-performance operational amplifier, a low-leakage analog switch, and a JFET integrating amplifier on one monolithic chip. The device samples an analog input and preserves its voltage on an external holding capacitor during the hold interval, with a 3 V/us slew rate and a 14-CDIP package measuring 0.300 inches wide by 7.62 mm long. A sample-and-hold amplifier is an analog signal-conditioning component that captures a rapidly changing input voltage and maintains a stable value for downstream conversion, measurement, or control. Its hierarchy extends from a sample-and-hold module to an analog amplifier and then to a broader analog signal-processing IC. The AD582 architecture is useful when a signal must be held at a defined instant rather than measured continuously while it changes. The AD582's principal benefits include its integrated operational amplifier, analog switch, and JFET integrating amplifier, together with separate analog and digital grounds. The separated grounds improve immunity to ground and switching transients, which is valuable in systems containing multiplexers, digital control logic, or switching power converters. An external holding capacitor completes the sample-and-hold function, allowing capacitance to be selected according to acquisition time, droop, and noise requirements. Because the device is fabricated on a monolithic chip, its sampling switch, amplifier, and integrating stage operate as one coordinated circuit rather than as separately assembled blocks. The AD582KD is identified as a one-circuit device in a 14-CDIP package, and a tube is the listed packaging method for this ordering variant. Detailed acquisition time, holding droop, input impedance, output leakage, and supply-current limits should be taken directly from the Analog Devices AD582 datasheet for the operating condition being designed. Typical uses include data acquisition, sensor-signal conditioning, pulsed measurement systems, analog-to-digital converter front ends, and instrumentation where an analog value must remain stable during conversion. The external holding capacitor is central to these applications: its value, dielectric type, leakage current, and PCB placement can determine acquisition performance, charge injection error, and hold stability. Design the circuit with short analog input and output paths, a low-impedance return for the analog ground, and a physically small holding capacitor connected close to the relevant device pins. Review acquisition timing before increasing acquisition frequency. Also account for clock or control-signal transitions at the sample-and-hold control input because coupling from the digital domain can degrade the held value. This product page consolidates the AD582KD architecture, package information, replacement guidance, comparison criteria, and practical application notes. The engineering guidance emphasizes the features engineers must preserve when qualifying a replacement: pin compatibility, external holding-capacitor behavior, acquisition time, hold droop, leakage, supply range, and control-input timing.

RFQ پەیوەندی
AD582KH - 1.5MHz Sample-and-Hold Amplifier | Analog Devices
AD582KH

AD582KH - 1.5MHz Sample-and-Hold Amplifier | Analog Devices

Analog Devices AD582KH is a single-channel sample-and-hold amplifier with a listed bandwidth of 1.5 MHz, 6 us acquisition time, 2 mV input offset voltage, and 500 ns settling time. The device is packaged in a 10-pin TO-100 package and is intended for precision analog signal acquisition, instrumentation, and control systems. A sample-and-hold amplifier is an analog integrated circuit that samples an input voltage during a controlled acquisition interval and then stores that voltage on an external holding capacitor. It belongs to the broader sample-and-hold amplifier category, which combines an operational amplifier, a low-leakage analog switch, and a JFET integrating amplifier. The AD582 also provides separate analog and digital ground connections to improve immunity to ground and switching transients. Key characteristics include one sampling channel, 1.5 MHz bandwidth, 6 us acquisition time, 2 mV input offset voltage, and 500 ns settling time. The external holding capacitor allows the sampled level to remain available after the acquisition interval ends. Separate analog and digital grounds are particularly useful in mixed-signal systems where the input signal path and digital control circuitry can otherwise share switching disturbances. The AD582 is fabricated as a monolithic sample-and-hold circuit containing a high-performance operational amplifier, a low-leakage analog switch, and a JFET integrating amplifier. Its architecture supports rapid acquisition followed by stable signal holding, while the 10-pin TO-100 package facilitates through-hole assembly and repair. Analog Devices also identifies MIL-STD-883-compliant versions within the AD582 product family, although the exact qualification status of the KH suffix should be confirmed for a regulated program. Typical applications include precision data-acquisition front ends, laboratory instrumentation, industrial process control, analog measurement systems, pulse sampling, and communications equipment. The AD582KH is particularly appropriate when a sampled analog value must be captured and held for conversion, comparison, control, or further signal processing during a later system cycle. Circuit design must provide a suitable external holding capacitor, maintain low-leakage routing around the held node, and connect the analog and digital grounds according to the Analog Devices AD582 datasheet. Input and control timing also determine whether the 6 us acquisition specification is sufficient for the signal being sampled. Stable reference and supply arrangements are necessary for repeatable system-level accuracy. This page combines the manufacturer architecture description, listed electrical characteristics, package information, drop-in family comparisons, and practical application guidance. It is intended to help engineers determine whether the AD582KH fits a sample-and-hold requirement while also identifying the key parameters that should be verified against the manufacturer datasheet before layout or production release.

RFQ پەیوەندی
AD582SD - 25us Sample-and-Hold Amplifier | Analog Devices
AD582SD

AD582SD - 25us Sample-and-Hold Amplifier | Analog Devices

The Analog Devices AD582SD is a single-channel sample-and-hold amplifier with 25 microsecond acquisition time, 3 V/µs slew rate, and a 14-pin ceramic dual-inline package. It combines a high-performance operational amplifier, a low-leakage analog switch, and a JFET integrating amplifier on one monolithic chip, while an external holding capacitor completes the sample-and-hold function. A sample-and-hold amplifier is an analog signal-processing IC that captures an input voltage during a sampling interval and maintains that voltage for later processing. In the broader hierarchy, it belongs to the analog amplifier family and supports data acquisition, instrumentation, and closed-loop control systems. The AD582 is especially useful when a rapidly changing analog input must be converted into a stable level for an ADC, comparator, or control loop. The AD582SD provides separate analog and digital ground connections, improving immunity to ground and switching transients. Its low-leakage analog switch helps preserve the held voltage between acquisition intervals, while the integrated JFET amplifier provides high input impedance. The 3 V/µs slew rate supports acquisition of changing input signals, and the 25 µs acquisition specification gives designers a defined settling interval to work with. Internally, the operational amplifier provides the active signal path, the analog switch controls acquisition versus hold state, and the JFET integrating amplifier isolates the holding capacitor. These elements are fabricated on a single monolithic chip. An external holding capacitor remains essential, and its capacitance, dielectric type, leakage, and PCB placement directly influence acquisition accuracy, droop, noise, and achievable resolution. Typical uses include precision data-acquisition systems, laboratory instrumentation, industrial control equipment, analog measurement interfaces, and sample-and-hold stages preceding analog-to-digital conversion. The AD582 can also serve in pulse-width measurement, control loops, and analog signal conditioning where holding a variable waveform level simplifies downstream processing. PCB design should keep the holding-capacitor connection short, use a clean analog-ground return, and isolate sensitive input routing from switching nodes. Because external capacitor behavior strongly influences accuracy, follow the capacitor selection and layout guidance in the manufacturer datasheet rather than treating the acquisition time as independent of the complete circuit. This page combines the manufacturer's architecture description with verified package and timing information, practical capacitor-layout guidance, lifecycle considerations, and a strict review of same-footprint alternatives. It is intended to help engineers determine whether the AD582SD fits a legacy precision-analog design before requesting sourcing and assembly support.

RFQ پەیوەندی
AD582SH - 25us Sample-and-Hold Amplifier | Analog Devices
AD582SH

AD582SH - 25us Sample-and-Hold Amplifier | Analog Devices

The Analog Devices AD582SH is a one-channel integrated sample-and-hold amplifier with a 25 µs acquisition time, 25 mA output capability, and a 10-pin TO-100 package. Designed for precision signal acquisition, it combines a high-performance operational amplifier, a low-leakage analog switch, and a JFET integrating amplifier on one monolithic chip. An external holding capacitor completes the sample-and-hold function. A sample-and-hold amplifier is a data-conversion support circuit that samples an analog input during a defined acquisition interval and stores that voltage on an external capacitor while the remaining circuit performs conversion, comparison, measurement, or signal processing. In the broader hierarchy, it belongs to the amplifier family, specifically instrumentation and signal-conditioning ICs used with ADCs, sensors, test systems, and precision control equipment. The AD582SH supports input signals up to ±12 V according to the manufacturer documentation and uses separate analog and digital ground connections to improve rejection of ground and switching transients. Its low-leakage hold path is central to preserving the captured voltage during conversion intervals, while the integrated amplifier reduces the number of external active components required. The 25 µs acquisition specification makes the device suitable for moderate-speed data-acquisition channels rather than high-frequency waveform capture. A typical implementation places the input signal on the amplifier input, connects the prescribed external holding capacitor to the hold terminal, and applies the logic control signal required to switch between acquisition and hold states. Designers should maintain separate analog and ground-return paths, place the holding capacitor close to the device, and account for capacitor leakage, dielectric absorption, input bias current, and settling time when defining system accuracy. Typical uses include multiplexed data-acquisition systems, analog measurement front ends, industrial process monitoring, laboratory instrumentation, and sampled sensor interfaces. The AD582SH can also precede successive-approximation or pipeline ADCs when a stable input must be presented during conversion. Its integrated architecture is particularly useful where board area, component count, and predictable acquisition behavior matter more than very short acquisition times. The principal design trade-off is acquisition speed versus hold error. Selecting the external holding capacitor requires balancing settled output voltage, capacitor leakage, dielectric absorption, and the time available to charge it. Keep high-impedance routes short, provide clean grounding, and verify timing against the acquisition interval required by the downstream converter rather than treating the 25 µs figure as independent of capacitor and source impedance. This page combines the manufacturer's device description with package information, drop-in replacement guidance, application-oriented circuit considerations, and a parameter comparison. It supports faster engineering selection by separating the verified AD582SH characteristics from design assumptions that must be checked against the external holding capacitor and the complete acquisition system.

RFQ پەیوەندی
AD582SH/883B - Military Sample-and-Hold Amplifier | Analog Devices
AD582SH/883B

AD582SH/883B - Military Sample-and-Hold Amplifier | Analog Devices

The AD582SH/883B is a military-grade sample-and-hold amplifier manufactured by Analog Devices, designed for precision data acquisition systems requiring high accuracy and reliability. It integrates a high-performance operational amplifier, a low-leakage analog switch, and a JFET integrating amplifier on a single monolithic chip, with an external holding capacitor completing the sample-and-hold function. The device operates from a nominal ±15V supply, features a maximum acquisition time of 6 µs, and is specified over the full military temperature range of -55°C to +125°C. Housed in a 10-pin TO-100 metal can package, it provides separate analog and digital grounds to improve immunity to ground and switching transients, making it ideal for harsh environments. A sample-and-hold amplifier (SHA) is an analog circuit that captures the voltage of an input signal at a specific instant and holds it constant for a defined period, enabling accurate conversion by an analog-to-digital converter (ADC). It is a critical building block in data acquisition systems, where it bridges the gap between fast-changing analog signals and the finite conversion time of ADCs. The AD582SH/883B belongs to the family of sample-and-hold circuits, which are essential in applications such as automatic test equipment, medical instrumentation, and military avionics. Key features of the AD582SH/883B include its MIL-STD-883 compliance, ensuring reliability under extreme conditions, and its separate analog and digital grounds, which minimize noise coupling. The device offers a maximum acquisition time of 6 µs, allowing it to track fast signals, and a maximum supply current of 4.5 mA, making it power-efficient for its class. The TO-100 metal can package provides robust hermetic sealing, protecting the internal circuitry from moisture and contaminants. Technically, the AD582SH/883B uses bipolar technology, which offers high-speed performance and low offset voltage. The internal JFET integrating amplifier provides high input impedance, reducing loading on the signal source. The low-leakage analog switch ensures minimal droop rate, maintaining the held voltage accurately over time. The device's architecture is optimized for precision, with careful attention to charge injection and aperture error, which are critical for high-resolution sampling. Typical applications include military radar systems, aerospace telemetry, and industrial process control, where the device's ruggedness and precision are paramount. In these systems, the AD582SH/883B is used to sample analog sensor signals and hold them for digitization, ensuring accurate measurement even in noisy environments. When designing with the AD582SH/883B, it is essential to select an appropriate external holding capacitor to balance acquisition time and droop rate. A larger capacitor reduces droop but increases acquisition time, while a smaller capacitor improves speed but may compromise hold stability. Additionally, proper grounding and decoupling are critical to maintain the device's noise immunity.

RFQ پەیوەندی
AD585AQ/+ - 5 us Sample-and-Hold Amplifier | Analog Devices
AD585AQ/+

AD585AQ/+ - 5 us Sample-and-Hold Amplifier | Analog Devices

Analog Devices AD585AQ/+ is a monolithic one-channel sample-and-hold amplifier with an acquisition time of 5 us, supplied in a 14-pin CERDIP package. The device combines a high-performance operational amplifier, an ultralow-leakage analog switch, and a FET input integrating amplifier with an internal holding capacitor and matched application resistors. It is designed for precision acquisition systems that must capture an analog input rapidly and retain its voltage for later measurement or conversion. A sample-and-hold amplifier is an analog signal-conditioning component that switches between acquisition and holding modes. During acquisition, the input signal passes through the input stage and charging network; during hold, the internal capacitor preserves the sampled voltage while the external circuit reads it. In the broader component hierarchy, the AD585 belongs to the amplifier family and specifically to the sample-and-hold amplifier subcategory used in data-acquisition, instrumentation, and control systems. The principal benefits of the AD585 architecture are integrated acquisition circuitry, an internal holding capacitor, and matched resistors that simplify implementation. The differential HOLD control can operate with different logic families when an appropriate reference level is provided, while an on-chip TTL reference supports TTL-compatible control. These characteristics help reduce external component count and make acquisition timing more predictable in laboratory, industrial, and embedded analog systems. The AD585 uses a signal path that separates fast acquisition from low-leakage voltage retention. Its FET input stage supports the high input impedance expected by sensor and measurement circuits, while the operational-amplifier section provides signal conditioning and drive for downstream circuitry. The monolithic implementation also keeps the holding capacitor and associated resistors thermally and physically close to the active circuitry, which is important when the sampled value must remain stable during conversion or processing. Typical uses include rapid analog measurement before an ADC, peak-and-hold style acquisition, synchronized data logging, industrial process monitoring, and precision test equipment. The differential HOLD input is particularly useful when the system controller controls acquisition timing. Because the package is a through-hole 14-pin CERDIP, the part is also appropriate for legacy instrumentation, educational systems, and maintenance designs where a sealed ceramic package and straightforward prototyping are priorities. Designers should follow the manufacturer datasheet for the exact pin assignments, timing definitions, acquisition accuracy, input range, output drive, hold leakage, and recommended bypass connections. Pay particular attention to settling time and droop during hold because system accuracy can be limited by capacitor leakage, switch behavior, switch leakage, source impedance, and the timing of the HOLD signal. Confirm that the required logic thresholds and voltage references match the surrounding control system before finalizing the circuit. This page organizes the AD585AQ/+ architecture, package information, sourcing details, practical applications, and verified drop-in options into an engineering-focused reference. It also provides design guidance that helps distinguish a genuine pin-compatible replacement from a merely similar sample-and-hold function, supporting faster component selection without changing the original PCB footprint.

RFQ پەیوەندی
AD585JP Precision Sample-and-Hold Amplifier | Analog Devices
AD585JP

AD585JP Precision Sample-and-Hold Amplifier | Analog Devices

The Analog Devices AD585JP is a monolithic precision sample-and-hold amplifier with one sampling circuit in a 20-pin PLCC package measuring 9 mm by 9 mm. It combines a high-performance operational amplifier, an ultralow-leakage analog switch, a FET-input integrating amplifier, an internal holding capacitor, and matched application resistors. This integrated signal path is designed for fast 10-bit and 12-bit data-acquisition systems that require short acquisition time, low sample-to-hold offset, and low hold droop. A sample-and-hold amplifier is an analog signal-conditioning component that samples an input voltage during a controlled interval and then stores that voltage for later processing. It belongs to the amplifier IC family and the broader analog signal-acquisition hierarchy. By combining the sampling switch, amplifier, and holding capacitor in one monolithic implementation, the AD585JP reduces the number of separately matched discrete elements needed in a precision acquisition channel. The central features of the AD585JP are its integrated high-performance operational amplifier, ultralow-leakage sampling switch, and FET-input integrating amplifier. The internal holding capacitor and matched application resistors are important because their integration supports accurate sample acquisition and flexible application design. The one-circuit configuration simplifies the external signal path while preserving the control required by high-speed data converters. Technically, the AD585JP performs two distinct functions in each acquisition cycle. During acquisition, the analog switch connects the input to the internal sampling network, allowing the holding capacitor to charge toward the sampled voltage. During hold, the switch isolates the stored charge so that the amplifier can present a stable signal to the following converter or instrumentation circuitry. Low leakage limits charge loss during hold, while matched resistors reduce errors associated with the sampling network. The AD585 is particularly suited to precision, high-speed 10-bit and 12-bit data-acquisition systems. Typical uses include multiplexed analog measurement systems, instrumentation front ends, laboratory data loggers, and signal-processing subsystems in which each converted sample must be captured and held with minimal acquisition or droop error. Its monolithic construction is especially useful where component matching, compact implementation, and repeatable system behavior are important. A key design consideration is the relationship between acquisition time and source impedance. The source presented to the input must be capable of charging the internal holding capacitor through the complete acquisition interval. PCB layout should preserve short, low-noise input paths, while power-supply bypass capacitors should be positioned close to the device. Timing control must ensure that the hold command occurs only after the acquisition interval has elapsed and that the hold duration remains within the circuit droop limits. This product record combines the AD585JP architecture and package information with practical implementation guidance, application context, and a structured path for evaluating replacement decisions. It is intended to help engineers establish the correct operating conditions, interface requirements, and PCB footprint before integrating the sample-and-hold amplifier into a precision measurement system.

RFQ پەیوەندی
AD5933YRSZ - 1MSPS 12-bit Impedance Converter, 16-SSOP
AD5933YRSZ

AD5933YRSZ - 1MSPS 12-bit Impedance Converter, 16-SSOP

The Analog Devices AD5933YRSZ is a high-precision 1 MSPS, 12-bit impedance converter and network analyzer housed in a 16-pin SSOP (RS) package, combining an on-board programmable frequency generator, a 12-bit analog-to-digital converter (ADC), and a discrete Fourier transform (DFT) engine on a single chip. The excitation frequency can be set up to 16.776 MHz, allowing an external complex impedance to be stimulated with a known sine wave; the response is sampled and processed by an on-chip DFT to extract real and imaginary impedance components. Key headline parameters are: 1 MSPS ADC, 12-bit resolution, and a 16.776 MHz maximum MCLK. The device operates from 2.7 V to 5.5 V supply and supports I2C and SPI serial interfaces for register configuration. An impedance converter network analyzer is a mixed-signal subsystem that synthesizes a sine stimulus, applies it to an external unknown impedance (typically via a precision front-end op-amp and transimpedance gain resistor), and uses an ADC plus on-chip DFT to extract the impedance's real and imaginary components at each frequency. This category sits inside the larger family of data acquisition ICs (ADC/DAC) and ultimately under the semiconductor hierarchy of mixed-signal converters. Compared to discrete lock-in amplifier or LCR-meter solutions, an integrated impedance converter dramatically reduces PCB area, firmware complexity, and BOM cost for embedded bio-impedance, chemical-sensor, and material-analysis instruments. The AD5933 is the industry-standard example of this category. Key features include programmable frequency sweep with start, delta, and number-of-increments registers that automate multi-point frequency response capture, selectable PGA gain of ×1 or ×5 to accommodate a wide impedance range, and configurable clock sources (internal oscillator, external clock, or external crystal). Output excitation voltage is selectable between 2 V p-p and 1 V p-p (with offset option), and the on-chip temperature sensor enables system-level compensation. The integrated DFT returns magnitude and phase registers that can be linearly extrapolated to estimate impedance magnitude and phase via the gain factor formula. Architecturally, the AD5933 combines a 27-bit direct digital synthesizer (DDS) for frequency generation, a 12-bit SAR ADC clocked at up to 1 MSPS, and an embedded DSP that performs a 1024-point DFT on the ADC output. The wide excitation range (1 kHz to 500 kHz typical) covers most bio-impedance and electrochemical applications. The device is specified from -40 °C to +125 °C with 16-SSOP packaging offering moderate thermal resistance. Calibration using a known reference impedance (typically 200 kΩ or 100 kΩ) is required to compute the gain factor and achieve < ±2 percent impedance error. Typical applications include portable bio-impedance body-fat analyzers, electrochemical gas and glucose sensors, fuel-cell and battery impedance spectroscopy, material characterization for coatings, in-situ corrosion monitoring, and low-frequency LCR-meter front-ends. In each case, the AD5933's integrated DFT eliminates the need for a separate DSP/MCU to run spectral analysis. Industrial 4 mA and 24 V rail systems benefit from the 5 V tolerant digital interface. To design correctly, system engineers must reserve 4 GPIO for I2C or SPI, decouple AVDD with a 1 µF and 100 nF pair, and follow the calibration routine using a precision reference resistor within the target impedance range.

RFQ پەیوەندی
AD5934YRSZ - 250 kSPS 12-Bit Impedance Converter | Analog Devices
AD5934YRSZ

AD5934YRSZ - 250 kSPS 12-Bit Impedance Converter | Analog Devices

The Analog Devices AD5934YRSZ is a 250 kSPS, 12-bit impedance converter and network analyzer that combines an on-board frequency generator with a 12-bit, 250 kSPS analog-to-digital converter (ADC). Housed in a 16-pin SSOP package (YRS suffix), the device is specified for operation from a 3.3 V supply with an external MCLK up to 16.776 MHz, and it produces an excitation output up to 50 kHz for sweeping an unknown complex impedance. The integrated discrete Fourier transform (DFT) engine returns calibrated real and imaginary 16-bit words per frequency point, allowing a host microcontroller to compute magnitude and phase. An impedance analyzer is an instrument class that measures the complex impedance (resistance plus reactance) of a component, sensor, or biological sample across a range of AC frequencies. Within the broader instrumentation hierarchy, the AD5934 sits between a discrete lock-in amplifier and a full benchtop LCR meter: it removes the need for a separate function generator, digitizer, and FFT processor while still delivering calibrated magnitude/phase data over a user-selected frequency sweep. This integration is what makes it attractive for embedded electrochemical, bioimpedance, and material-sensing products. Key specifications include 12-bit ADC resolution at 250 kSPS, an excitation amplitude programmable in four steps from 0.2 V p-p to 2.0 V p-p, a programmable gain amplifier (PGA) with x1 or x5 settings, an I2C-compatible serial interface, and an operating temperature range of -40C to +125C. The on-chip temperature sensor (TA pin) and dedicated system clock input allow designers to add temperature compensation and reject mains-related clock jitter in the same BOM. Architecturally, the AD5934 separates the excitation DAC, the transimpedance front end (with external RFB), the sampling ADC, and the DSP DFT block, all clocked from a single MCLK reference. The result is a system whose accuracy is determined by the external calibration resistor (typically 200 kohm between RFB and VIN), the stability of the MCLK source, and the impedance range selected via the gain resistor - not by any factory trim step, which simplifies board bring-up. Typical applications include bioimpedance and skin-conductance analysis, electrochemical sensor interfaces, in-line material moisture meters, portable LCR-style probes, and multi-frequency material identification. Engineers choose the AD5934 when they need calibrated magnitude/phase data without the cost, size, or power budget of a bench instrument. When designing with the part, place the calibration resistor close to the RFB and VIN traces and drive MCLK from a low-jitter source; this is the single biggest determinant of sweep-to-sweep repeatability. This page synthesizes distributor pricing, qualified drop-in alternatives, and practical layout notes not collected in the standalone datasheet PDF.

RFQ پەیوەندی
AD5934YRSZ-REEL7 - 250kSPS 12-Bit Impedance Converter | ADI
AD5934YRSZ-REEL7

AD5934YRSZ-REEL7 - 250kSPS 12-Bit Impedance Converter | ADI

The Analog Devices AD5934YRSZ-REEL7 is a high-precision 12-bit, 250 kSPS impedance converter and network analyzer system-on-chip that combines an on-board programmable frequency generator with a 12-bit analog-to-digital converter (ADC) and an on-chip DSP engine for discrete Fourier transform (DFT) processing, all integrated into a 16-pin SSOP package. The device excites an external complex impedance with a known frequency up to 50 kHz, samples the response signal, and returns calibrated real and imaginary impedance words via I²C/SPI serial interface, eliminating the need for external signal conditioning and reducing the BOM for portable bio-impedance and material analysis designs. An impedance converter network analyzer is a specialized data acquisition system that performs synchronous sine excitation, current-to-voltage conversion, and discrete Fourier transform (DFT) processing to extract magnitude and phase information from a connected unknown impedance. As a member of the impedance analyzer / LCR meter IC family, it sits at the intersection of the broader categories of direct digital synthesis (DDS), signal chain analog-to-digital converter (ADC), and embedded DSP, which together form a complete vector impedance measurement sub-system. The AD5934 in particular integrates DDS, transimpedance amplifier, ADC, and DFT engine into one IC. Key specifications include 12-bit ADC resolution, 250 kSPS sampling rate, programmable excitation output frequency up to 50 kHz, 16.776 MHz internal clock or external MCLK input, on-chip temperature sensor with ±2 °C precision, and serial interface compatibility with I²C or SPI protocols. The device supports a system clock from 0.1 MHz to 16.776 MHz and is supplied from a single 2.7 V to 5.5 V rail, equivalent to most 3 V or 5 V logic rails. The internal DDS allows 0.1 Hz frequency resolution when clocked from the on-chip oscillator. The excitation amplitude is programmable in four discrete steps between 0.2 Vpp and 1.98 Vpp to accommodate different impedance ranges. The AD5934 architecture combines a 28-bit direct digital synthesizer (DDS) core, a low-noise transimpedance front-end, a 12-bit successive-approximation ADC, and an embedded DFT processor that returns calibrated real (R) and imaginary (I) 16-bit words per frequency point. Gain factor calibration using a reference impedance removes system gain error across the 100 Ω to 10 MΩ measurement range, equivalent to a four-decade dynamic span, while the embedded temperature sensor compensates for system drift across the -40 °C to +125 °C automotive-grade operating range. The serial interface supports both standard I²C (100 kHz) and SPI (up to 5 MHz) for flexible host connectivity. Typical applications include portable bio-electrical impedance analysis (BIA) for body composition scales and fitness monitors, in-vitro electrochemical biosensors for glucose and pathogen detection, industrial material moisture and soil moisture analysis, fuel cell and battery impedance spectroscopy for state-of-charge estimation, and on-board diagnostic (OBD) systems for automotive sensor health monitoring. Compared to discrete lock-in amplifier solutions, the AD5934 reduces board area, BOM count, and firmware complexity by integrating the entire excitation-acquisition-DFT pipeline into one SSOP-16 package, while preserving calibration-grade accuracy through its gain factor compensation routine. When designing with the AD5934, place a precision 200 Ω or 100 kΩ reference resistor between the excitation output (IOUT) and the ADC input (VIN) for system calibration, and use the temperature sensor reading to correct for thermal drift of the reference resistor. The RFB pin selects the transimpedance gain; pair it with a low-temperature-coefficient external feedback resistor to extend the impedance measurement range beyond 1 MΩ. This page synthesizes distributor pricing, drop-in alternatives, application notes, and design tips that complement the manufacturer datasheet with practical engineering guidance for impedance measurement system development.

RFQ پەیوەندی