بەرهەمەکان (46,000+)

AD647SE/883B - Ultralow Drift Dual JFET Op Amp | Analog Devices
AD647SE/883B

AD647SE/883B - Ultralow Drift Dual JFET Op Amp | Analog Devices

The AD647SE/883B is an ultralow drift, dual JFET operational amplifier from Analog Devices, designed for high-precision instrumentation and military/aerospace applications. It combines two matched JFET input amplifiers in a single hermetically sealed 20-lead ceramic leadless chip carrier (CLCC) package, processed to MIL-STD-883B for enhanced reliability. The device features a maximum input offset voltage of 500 µV, a low input bias current of 10 pA, and a minimum slew rate of 2 V/µs, making it suitable for precision signal conditioning. An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output, used in analog signal processing. The AD647SE/883B is a dual op amp, meaning it contains two independent amplifiers in one package, saving board space and improving thermal tracking. As a JFET-input op amp, it offers very high input impedance and low bias current, ideal for interfacing with high-impedance sensors and precision integrators. Key features include ultralow drift (typically 0.5 µV/°C), low noise, and high common-mode rejection. The device operates from dual supplies up to ±18 V, with a nominal supply voltage of 15 V. The extended temperature grade (S) supports operation from -55°C to +125°C, meeting military temperature requirements. The 20-lead CLCC package provides a compact, hermetic solution for harsh environments. Technically, the AD647 uses ion-implantation and laser wafer drift trimming to achieve matched JFETs on a monolithic bipolar chip, resulting in superior DC precision. The device's bipolar technology ensures low offset voltage and drift, while the JFET input stage provides high input impedance. This combination makes it a versatile choice for precision analog circuits. Typical applications include precision instrumentation amplifiers, active filters, data acquisition systems, and military avionics. Its low drift and high accuracy are critical in these applications where temperature variations can degrade performance. When designing with the AD647SE/883B, ensure proper decoupling of the power supply pins with 0.1 µF ceramic capacitors close to the device. Also, consider the input bias current and offset voltage when designing high-impedance circuits, and use appropriate guarding techniques to minimize leakage currents.

RFQ پەیوەندی
AD647SH/883B - Dual JFET Op Amp, 250uV, 1MHz | Analog Devices
AD647SH/883B

AD647SH/883B - Dual JFET Op Amp, 250uV, 1MHz | Analog Devices

The AD647SH/883B is a dual, ultralow drift JFET-input operational amplifier manufactured by Analog Devices, now supplied by Rochester Electronics. It is designed for high-precision instrumentation and signal conditioning applications where low offset voltage, low input bias current, and low drift are critical. The device operates from dual supplies and is available in a hermetic TO-99 metal can package, ensuring excellent long-term stability and reliability in harsh environments. An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output. It is a fundamental building block in analog electronics, used in configurations such as inverting, non-inverting, differential, and instrumentation amplifiers. The JFET-input architecture provides very high input impedance and extremely low input bias current, making it ideal for interfacing with high-impedance sources such as sensors, photodiodes, and precision measurement circuits. The AD647SH/883B belongs to the family of precision op amps, which are characterized by low offset voltage, low noise, and low drift over temperature. Key features of the AD647SH/883B include a maximum input offset voltage of 250 µV, a gain-bandwidth product of 1 MHz, and an input bias current of 35 pA. The device also offers a slew rate of [DATA_NEEDED: slew rate] and operates over a supply voltage range of [DATA_NEEDED: supply voltage range]. The dual-channel configuration saves board space and reduces component count in multi-channel systems. The TO-99 package provides a hermetic seal, protecting the die from moisture and contaminants, which is essential for military and aerospace applications. The AD647SH/883B is built using Analog Devices' precision bipolar and JFET process technology, which combines the low offset and drift of bipolar transistors with the high input impedance of JFETs. This architecture achieves a typical input offset voltage drift of [DATA_NEEDED: offset voltage drift] and a common-mode rejection ratio of [DATA_NEEDED: CMRR]. The device is fully specified over the military temperature range of -55°C to +125°C, making it suitable for defense and space systems. Typical applications include precision data acquisition systems, medical instrumentation, test and measurement equipment, and active filters. The low input bias current allows direct connection to high-impedance sensors without significant loading errors. The dual-channel design is particularly useful for stereo audio processing and multi-channel industrial control loops. When designing with the AD647SH/883B, ensure proper supply decoupling with 0.1 µF ceramic capacitors close to the supply pins. The TO-99 package requires careful handling to avoid damage to the leads. For high-impedance circuits, a guard ring around the input pins can reduce leakage currents and improve performance.

RFQ پەیوەندی
AD648KN - Dual Low-Power BiFET Op Amp | Analog Devices
AD648KN

AD648KN - Dual Low-Power BiFET Op Amp | Analog Devices

The Analog Devices AD648KN is a matched dual precision, low-power BiFET operational amplifier with 10 pA maximum input bias current when warmed, 400 µA maximum quiescent current, 1 V maximum offset voltage, 1 V/µs slew rate, and 1 MHz unity-gain bandwidth. It is supplied in an 8-pin plastic dual in-line package for low-noise, low-power signal conditioning. A BiFET operational amplifier is an input stage based on field-effect transistors rather than bipolar input transistors. This input architecture provides very low bias current, making it especially useful when measuring high-impedance sources, guarding sensitive sensor nodes, filtering weak signals, or driving analog-to-digital converter inputs. The AD648 belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. The AD648 combines low input bias current with low quiescent current, allowing its dual channels to operate without imposing excessive load on low-power sources. Its matched-pair construction supports consistent behavior across two amplifier channels, while ion-implanted FET and laser wafer trimming support precision performance. These characteristics distinguish it from general-purpose dual op amps that may consume more power or present substantially higher input bias current. The device is specified for low offset voltage, low voltage drift, 1 V/µs slew rate, and 1 MHz unity-gain bandwidth. The combination of low noise-related input characteristics and modest bandwidth is appropriate for precision DC and low-frequency signal paths rather than high-speed video, RF, or waveform edge applications. The AD648 datasheet also identifies pin compatibility with standard dual operational-amplifier footprints, simplifying replacement and evaluation. Typical uses include precision current-to-voltage conversion, low-level sensor amplification, medical and laboratory instrumentation, photodiode signal conditioning, battery-powered measurement systems, and dual-channel filter or buffer circuits. Because the amplifiers draw no more than 400 µA quiescent current, they are particularly attractive where every microampere affects battery life or system thermal budget. When designing around the AD648KN, verify the input and output common-mode range, supply voltage limits, output load capability, and stability requirements from the manufacturer datasheet. Place input and output compensation components close to the relevant pins, maintain suitable grounding around high-impedance nodes, and avoid layouts that allow input leakage or switching-node currents to modulate the source impedance. This product record combines the manufacturer's device information, exact-MPN pricing references, identified package details, and application-oriented engineering guidance. It also distinguishes genuine pin-compatible replacements from options that merely provide similar electrical functions, helping designers assess replacement risk before committing a board layout.

RFQ پەیوەندی
AD648KR - Dual Low-Power Precision BiFET Op Amp | Analog Devices
AD648KR

AD648KR - Dual Low-Power Precision BiFET Op Amp | Analog Devices

Analog Devices AD648KR is a dual precision, low-power BiFET operational amplifier with a maximum input bias current of 10 pA, a maximum quiescent current of 400 µA, and a 1 MHz unity-gain bandwidth, packaged in an 8-pin SOIC. It combines low offset voltage, low voltage drift, high common-mode rejection, and low 1/f noise for precision analog signal conditioning. A BiFET operational amplifier is an input stage built with field-effect transistors. This low-input-bias architecture places the AD648 in the wider hierarchy of operational amplifier, analog amplifier, and semiconductor. Unlike general-purpose bipolar operational amplifiers, the AD648 is optimized for measuring systems where source leakage, drift, and power consumption can corrupt small signals or limit battery-powered operation. The AD648 uses ion-implanted FET input devices and laser wafer trimming. Its maximum input offset voltage is 1 mV, maximum offset drift is 2 µV/°C, and maximum output noise is 2 V p-p. Common-mode rejection reaches 82 dB minimum, while the dual 1 MHz amplifiers support precision instrumentation, low-level current measurement, and buffered sensor interfaces. The AD648KR is offered in the 8-pin SOIC package and is pin compatible with established dual operational amplifiers such as the LF442, TL062, and AD642. Its low quiescent current makes it appropriate for battery-powered equipment, while its input characteristics reduce errors in high-impedance sources. The manufacturer lists the AD648 family as not recommended for new designs, so engineers should assess lifecycle constraints during sourcing decisions. Typical uses include precision instrument front ends, CMOS DAC buffers, pH and electrochemical sensor interfaces, photodiode signal chains, and low-power sensor conditioning. Each amplifier can operate from dual supplies, and its low input bias current is especially useful when leakage from sensors, guards, or PCB contamination becomes comparable to the measured signal. The main design consideration is dynamic performance. A 1 MHz unity-gain bandwidth is suitable for precision and low-frequency measurements but is much slower than modern high-speed amplifiers. Confirm source impedance, capacitive loading, required noise bandwidth, supply voltage, and settling behavior before using the device in higher-bandwidth signal chains. This product page combines manufacturer specifications, lifecycle guidance, pin information, drop-in alternatives, and application-focused design guidance. It also helps engineers distinguish genuine pin-compatible replacements from parts that merely offer similar low-power precision amplifier functions.

RFQ پەیوەندی
AD650SD/883B - V/F & F/V Converter 1MHz | Analog Devices
AD650SD/883B

AD650SD/883B - V/F & F/V Converter 1MHz | Analog Devices

The AD650SD/883B is a monolithic voltage-to-frequency (V/F) and frequency-to-voltage (F/V) converter from Analog Devices, designed for high-accuracy analog-to-digital conversion and precision frequency measurement. It operates at a maximum frequency of 1 MHz with a nonlinearity of ±0.1% (typical), making it suitable for demanding industrial and aerospace applications. The device is housed in a 14-pin ceramic dual-in-line package (CDIP) and is specified for the full military temperature range of -55°C to +125°C, ensuring reliable operation in extreme environments. A voltage-to-frequency converter (VFC) is an electronic circuit that converts an analog input voltage into a proportional output frequency. This type of converter is widely used in analog-to-digital conversion, where the frequency output can be easily counted by digital logic, providing high resolution and noise immunity. The AD650SD/883B also operates in the reverse mode as a frequency-to-voltage converter, enabling closed-loop control and frequency measurement applications. As a member of the voltage-to-frequency converter family, it bridges the analog and digital domains, offering a simple and robust interface for data acquisition systems. Key features of the AD650SD/883B include a 1 MHz full-scale frequency, ±0.1% typical nonlinearity, and a wide supply voltage range of ±9V to ±18V. The device offers both single-ended and differential input configurations, and its output is a square wave that can drive TTL or CMOS logic directly. The ceramic package provides excellent thermal stability and hermetic sealing, making it ideal for military and aerospace applications where reliability is critical. Technically, the AD650SD/883B uses a charge-balancing architecture that ensures high linearity and temperature stability. The input current is integrated over a fixed time period, and the output frequency is proportional to the input voltage. This design minimizes drift and provides excellent long-term stability. The device also includes an internal reference and a precision comparator, reducing the need for external components. Typical applications include precision analog-to-digital conversion, frequency-to-voltage conversion for tachometers and flow meters, and isolated signal transmission in industrial control systems. The AD650SD/883B is also used in aerospace telemetry and test instrumentation where high accuracy and wide temperature range are required. When designing with the AD650SD/883B, ensure proper decoupling of the power supply pins with 0.1µF ceramic capacitors placed close to the device. The input signal should be filtered to remove high-frequency noise, and the output frequency should be buffered if driving long cables. The device's power dissipation is moderate, but thermal management is recommended for high-temperature environments.

RFQ پەیوەندی
AD6600AST - 11-Bit, 20 MSPS Dual-Channel ADC | Analog Devices
AD6600AST

AD6600AST - 11-Bit, 20 MSPS Dual-Channel ADC | Analog Devices

The Analog Devices AD6600AST is an 11-bit, 20 MSPS dual-channel mixed-signal receiver ADC in a 44-LQFP package. It directly samples analog input frequencies up to 250 MHz and provides two receive channels, each with a 1 GHz input amplifier and 30 dB of automatic gain-ranging circuitry. The device supports 5 V analog operation and CMOS-compatible digital outputs for interfacing with 3.3 V or 5 V processing devices. A mixed-signal receiver ADC combines high-frequency analog sampling with parallel digital output. In the broader semiconductor hierarchy, the AD6600 belongs to the analog-to-digital converter family, integrates receiver functions into one device, and ultimately serves as a signal-chain interface for communications equipment. Its dual-channel architecture is designed for antenna-diversity receivers, where two antenna paths are sampled coherently for comparison and selection. Key features include 11-bit resolution, a 20 MSPS conversion rate, two analog inputs, a maximum 250 MHz analog input frequency, and 1 GHz input amplifiers. Each channel includes 30 dB of automatic gain ranging, which reduces the external signal-chain burden when received signal strength changes. Two's-complement CMOS output data can connect directly to 3.3 V or 5 V digital processing chips. The AD6600 combines an 11-bit pipeline ADC with receiver-oriented analog front-end functions in a single 44-LQFP package. Its 1 GHz input amplifiers provide wideband signal conditioning ahead of digitization, while the automatic gain-ranging block covers a 30 dB input range. These characteristics suit RF and IF sampling architectures where the received carrier must be captured directly rather than downconverted through additional mixer stages. Typical uses include dual-antenna diversity receivers, wireless infrastructure, communications test equipment, instrumentation, and other wideband sampling systems. Because the two channels provide separate gain-ranging paths, the device can support received-signal-strength measurement and diversity combining in one conversion system. A critical design consideration is the relationship between the 20 MSPS conversion rate and the 250 MHz maximum analog input frequency. PCB signal integrity, impedance control, grounding, and decoupling are essential because wideband input signals amplify supply and layout noise as well as the desired carrier. Use the pin-description table and application guidance in the manufacturer datasheet when assigning tracks, decoupling capacitors, and digital output routing. This page consolidates the verified manufacturer and distributor product information, identifies same-footprint replacement options, and adds application, comparison, and layout guidance that helps shorten evaluation time for wideband receiver-ADC designs.

RFQ پەیوەندی
AD6620ASZ - 65 MSPS Digital Receiver | Analog Devices
AD6620ASZ

AD6620ASZ - 65 MSPS Digital Receiver | Analog Devices

The Analog Devices AD6620ASZ is a 65 MSPS dual-channel digital receive signal processor with a frequency translator, two fixed-coefficient decimating filters, a programmable-coefficient decimating filter, and 3.3 V LVCMOS-compatible inputs, housed in an 80-PQFP package measuring 14 x 14 mm. The AD6620 family combines analog-to-digital conversion, frequency translation, and digital filtering in one receiver IC. A digital receive signal processor is an interface IC that samples an analog input and moves part of the signal-processing chain into the digital domain. Its functional hierarchy is ADC > digital receive signal processor > receiver interface IC > integrated circuit. Moving filtering and frequency conversion on chip reduces the need for separate external filter assemblies and can improve integration, repeatability, and channel-to-channel consistency in communications receivers. The AD6620's four cascaded signal-processing elements provide the main architectural distinction of the device. A frequency translator supports conversion away from an input carrier, while two fixed-coefficient decimating filters reduce signal bandwidth and a programmable-coefficient decimating filter adds design flexibility. The manufacturer describes the AD6620 family as a diversity receiver architecture that replaces sensitive analog filters with digital filters to reduce cost and board area. The AD6620ASZ operates from a 3.3 V-compatible digital interface and supports processing at up to 65 MSPS. These figures place the device in the high-speed signal-processing category, where conversion rate, digital filter response, interface timing, channel separation, and PCB signal integrity determine system performance. The 80-PQFP 14 x 14 mm package provides a substantial number of connections for parallel data, clocks, controls, and analog input circuitry, but it also demands careful package-outside and escape-routing planning. Typical applications include cellular diversity receivers, intermediate-frequency signal conditioning, software-defined radio front ends, wireless infrastructure, instrumentation, and other systems that require digital frequency translation followed by adjustable decimation. In these systems, the AD6620 can reduce reliance on external analog filter chains while preserving a digital path for downstream processing. The AD9643 and AD9680 are identified as newer devices with related digital-down-converter functionality, although they are not drop-in replacements for the 80-PQFP AD6620ASZ. A key design consideration is signal integrity. The parallel 3.3 V LVCMOS interface requires controlled clock routing, matched-length data connections, solid return paths, and careful separation between sensitive analog inputs and high-speed digital outputs. The 14 x 14 mm PQFP also has lead-to-lead spacing that requires examination when defining fanout, assembly rules, test access, and component placement around the device. This product record combines the confirmed 65 MSPS architecture, 3.3 V LVCMOS input compatibility, 80-PQFP package information, verified lifecycle indication, drop-in comparison, and practical receiver-design guidance. It also distinguishes exact package compatibility from newer functionally related converters that require a complete design review rather than a simple PCB substitution.

RFQ پەیوەندی
AD6623ABC 4-Channel 104 MSPS TSP | Analog Devices
AD6623ABC

AD6623ABC 4-Channel 104 MSPS TSP | Analog Devices

Analog Devices AD6623ABC is a 4-channel Transmit Signal Processor (TSP) operating at 104 MSPS and packaged in a 196-pin CSP-BGA. The device creates high-bandwidth digital transmit data for TxDAC converters from baseband data generated by a Digital Signal Processor. Its four-channel architecture and 104 MSPS processing rate position it as a dedicated digital transmit-signal-processing stage for communications equipment requiring parallel, repeatable digital signal generation. A Transmit Signal Processor is a specialized digital signal-processing IC positioned between a baseband DSP and a transmit data converter. It implements the digital interpolation, filtering, gain, and waveform-shaping functions required to convert low-speed baseband data into the high-rate sample stream accepted by a TxDAC. In the broader semiconductor hierarchy, the AD6623 belongs to the digital signal processor and transmit-signal-processing categories, complementing general-purpose DSPs with a fixed waveform-generation data path. The AD6623 provides four processing channels with a maximum sample rate of 104 MSPS. Its digital transmit path is designed to provide repeatable manufacturing and higher accuracy than comparable high-dynamic-range analog approaches. The manufacturer also identifies the AD6623 as pin-compatible with the AD6622 and capable of operating in AD6622-compatible control-register mode, which can simplify firmware migration and board redesign when the surrounding system architecture is compatible. The AD6623 is intended for communications transmitters using TxDAC architectures, including cellular, wireless, and other high-bandwidth signal-generation systems. Digital IF signal processing provides manufacturing repeatability, flexibility, and accuracy because waveform shaping is performed with digital logic rather than relying exclusively on precision analog networks. Its 104 MSPS rate supports four simultaneously processed transmit data streams or repeated use across a multi-channel RF transmit design. Assembly requires a 196-pin CSP-BGA land pattern and careful high-speed layout practices. The device should be placed near the associated digital interface and TxDAC circuitry to minimize data-transition distortion and interconnect timing margin. Power, ground, clock, and interface routing must follow the pin-description and layout guidance in the manufacturer datasheet, with particular attention to return paths and termination of high-speed digital connections. The principal design trade-off is fixed-function performance versus implementation flexibility. Compared with implementing every interpolation and shaping stage in a general-purpose FPGA, the AD6623 integrates a dedicated transmit-processing path and can reduce processor overhead. Designers should still validate clock-jitter, interpolation-filter, gain-control, and output-data timing against the intended modulation waveform and system-level error budget. This page combines the confirmed device identity, packaging, architecture, and compatibility information with practical selection guidance, structured specifications, and application-focused engineering notes. It identifies where the AD6623ABC fits in a TxDAC signal chain and distinguishes verified drop-in options from package or feature mismatches that require broader redesign.

RFQ پەیوەندی
AD6623ASZ - 4-Channel 104 MSPS Transmit Signal Processor | ADI
AD6623ASZ

AD6623ASZ - 4-Channel 104 MSPS Transmit Signal Processor | ADI

The Analog Devices AD6623ASZ is a four-channel Transmit Signal Processor (TSP) that generates high-bandwidth intermediate-frequency data for Transmit Digital-to-Analog Converters (TxDACs), supporting operation at up to 104 MSPS in a 128-lead MQFP package measuring 14 mm by 20 mm. The processor accepts baseband data from a digital signal processor and prepares parallel digital IF outputs for compatible TxDAC signal chains. A Transmit Signal Processor is a digital signal-processing IC positioned between a DSP or FPGA and a high-speed transmit DAC. It converts baseband or channelized digital information into the digital IF format required by selected TxDAC architectures. Within the broader hierarchy of digital up-converters, interface ICs, data converters, and signal-chain semiconductors, the AD6623 provides repeatable digital IF generation rather than performing the final analog conversion itself. The AD6623 provides four processing channels, 18-bit parallel digital IF outputs, and an 18-bit bidirectional parallel digital IF input/output path. The input/output interface supports cascading multiple devices for additional channels. The manufacturer identifies the AD6623 as pin-compatible with the AD6622 and capable of operating in AD6622-compatible control-register mode, which helps simplify upgrades between those signal-processing architectures. Its power architecture uses a 2.5 V CMOS core, 3.3 V output supply, and 5 V input supply. This separation supports lower-voltage internal logic while accommodating higher-voltage digital interfaces and external circuitry. The 104 MSPS processing rate enables narrowband digital IF generation for communications, radar, and instrumentation systems where direct IF generation offers manufacturing repeatability and flexible channel configuration. Typical applications include multi-channel digital transmitter front ends, wireless communications infrastructure, radar signal generation, test and measurement equipment, and broadband industrial systems using TxDACs. The four-channel architecture can reduce the number of separate digital processing paths when several output channels must be generated coherently from common baseband data. Layout should preserve controlled clocking, differential data routing, and clean supply distribution across all 128 leads. Review the manufacturer pin-description table and recommended decoupling network before schematic capture, and verify the exposed thermal strategy and maximum operating conditions for the selected 14 mm by 20 mm MQFP assembly. This product page combines the manufacturer’s device description, package and interface characteristics, drop-in compatibility information, sourcing details, and practical implementation guidance. It also identifies where detailed pin assignments, electrical limits, clock requirements, and application-specific values must be taken directly from the AD6623 datasheet.

RFQ پەیوەندی
AD6644 - 14-Bit 65 MSPS ADC | Analog Devices | Wideband
AD6644

AD6644 - 14-Bit 65 MSPS ADC | Analog Devices | Wideband

The AD6644 is a high speed, high performance, monolithic 14-bit analog-to-digital converter (ADC) from Analog Devices. It is designed for wideband, multichannel, multimode receivers and is part of the SoftCell transceiver chipset. The device operates at guaranteed sample rates of 65 MSPS (with a 40 MSPS version available) and provides CMOS-compatible digital outputs in twos complement format. It is packaged in a 52-lead Plastic Low Profile Quad Flat Pack (LQFP) and is specified for operation from -25°C to +85°C. An analog-to-digital converter (ADC) is a critical component in signal processing chains that converts continuous analog signals into discrete digital values for processing by digital systems. The AD6644 is a high-speed, high-resolution ADC, positioned in the hierarchy of data converters: ADC -> high-speed ADC -> wideband ADC -> IF-sampling ADC. It integrates a track-and-hold (T/H) circuit and reference, providing a complete conversion solution on-chip, which simplifies system design and reduces external component count. Key features of the AD6644 include a 65 MSPS guaranteed sample rate, 100 dB multitone SFDR, and low power dissipation of 1.3 W. It features differential analog inputs, which improve common-mode noise rejection, and digital outputs that are 3.3 V CMOS-compatible, ensuring easy interfacing with modern digital logic. The device uses a three-stage subrange architecture, achieving high accuracy and speed while maintaining low power and small die size. The AD6644 is built on Analog Devices' high speed complementary bipolar process (XFCB) and uses an innovative multipass circuit architecture. This design enables high dynamic performance, making it suitable for demanding applications such as digital receivers, cellular base stations, and test equipment. The device's wideband capability allows direct IF sampling, reducing the need for multiple downconversion stages. Typical applications include multichannel, multimode receivers, software-defined radios, cellular infrastructure, and radar systems. The AD6644's high SFDR and low noise make it ideal for these applications where signal fidelity is critical. Its differential inputs and CMOS outputs simplify integration with FPGAs and DSPs. When designing with the AD6644, careful attention to decoupling and grounding is essential to achieve optimal performance. The datasheet provides detailed recommendations for power supply decoupling and PCB layout to minimize noise and ensure accurate conversion.

RFQ پەیوەندی
AD664TD-UNI/883B - 12-Bit Quad DAC, Military | Analog Devices
AD664TD-UNI/883B

AD664TD-UNI/883B - 12-Bit Quad DAC, Military | Analog Devices

The AD664TD-UNI/883B is a monolithic 12-bit quad digital-to-analog converter (DAC) from Analog Devices, designed for precision multi-channel voltage-output applications. It integrates four complete 12-bit DACs on a single chip, each with a double-buffered input latch structure and data readback function. The device operates from a single external reference and is available in a 28-pin side-brazed ceramic DIP (CDIP) package, screened to military standards (MIL-STD-883). It supports unipolar (UNI) output range with a gain of one or two times the reference voltage, and features a microprocessor-compatible parallel interface for all read and write operations. A digital-to-analog converter (DAC) is an electronic component that converts digital binary data into an analog voltage or current. The AD664 is a quad DAC, meaning it contains four independent DAC channels on one chip, enabling simultaneous multi-channel analog output from a single digital interface. This device belongs to the family of data converters, which are essential in mixed-signal systems where digital processing meets the analog world. The AD664's architecture uses the BiMOS II process, combining bipolar and CMOS transistors, along with laser-trimmed thin-film resistors and double-level metal interconnects to achieve high accuracy and stability. Key features of the AD664TD-UNI/883B include four complete voltage-output DACs, data register readback, reset-to-zero override, multiplying operation, and double-buffered latches. The device offers a settling time of 10 microseconds (as per Xecor comparison data) and operates over the full military temperature range of -55°C to +125°C. The package is a 28-pin side-brazed ceramic DIP, which is suitable for high-reliability applications. The device is RoHS non-compliant, reflecting its military-grade heritage. The AD664 uses a double-buffered input latch structure, allowing all four DACs to be updated simultaneously, which is critical for applications requiring synchronized analog outputs. The data readback function enables verification of written data, enhancing system diagnostics. The reset-to-zero override forces all outputs to zero, useful for system initialization. The multiplying operation allows the reference voltage to be varied, enabling programmable gain or attenuation. Typical applications include military avionics, industrial process control, automatic test equipment (ATE), and precision instrumentation where multiple analog outputs are needed. The military screening ensures reliability in harsh environments. The parallel interface simplifies connection to microprocessors and DSPs. When designing with this device, ensure adequate decoupling on the power supply and reference pins, and consider the settling time when updating multiple channels. The device is obsolete, so verify availability and consider alternatives for new designs.

RFQ پەیوەندی
AD6654BBC - 14-Bit 92.16 MSPS 4/6-Channel IF Receiver | Analog Devices
AD6654BBC

AD6654BBC - 14-Bit 92.16 MSPS 4/6-Channel IF Receiver | Analog Devices

The Analog Devices AD6654BBC is a 14-bit, 92.16 MSPS mixed-signal wideband IF-to-baseband receiver with integrated digital down-conversion, designed for communications and signal-processing systems. It supports IF sampling frequencies up to 200 MHz, includes four or six receive channels depending on the device variant, and is supplied in a 256-CSPBGA package measuring 17 x 17 mm. A wideband IF-to-baseband receiver combines an analog-to-digital converter with programmable digital down-conversion. The ADC converts wideband intermediate-frequency signals into digital data, while the DDC stages reduce those data streams toward baseband for subsequent demodulation, filtering, or FFT processing. This integration can reduce the number of separate analog and digital components required in RF and communications signal chains. The AD6654BBC provides a 14-bit conversion resolution and a maximum sampling rate of 92.16 MSPS. Its internal 2.4 V reference and 2.2 V peak-to-peak analog input range support repeatable receiver design, while the internal differential track-and-hold circuit helps capture wideband IF signals. The family supports multimode processing for WCDMA and other communications standards. The principal distinction between the six-channel and four-channel devices is channel availability. In the four-channel version, Channel 4 and Channel 5 are not available; the remaining converter and digital-processing architecture is otherwise focused on the same wideband IF receiver use case. The AD6654BBC is identified by Analog Devices as not recommended for new designs. Typical applications include wireless infrastructure receivers, WCDMA base-station equipment, communications test systems, software-defined radio platforms, and wideband IF digitization. The high conversion rate is useful when a system must sample substantial IF bandwidth directly before performing digital channelization or demodulation. The 256-CSPBGA package requires careful PCB layout, including controlled escape routing from the fine-pitch array and adequate power and ground-plane integrity. Because the manufacturer identifies the device as not recommended for new designs, engineers should verify lifecycle availability, documentation revisions, and the required software configuration before committing a new design. This page consolidates the manufacturer product information, datasheet references, package characteristics, receiver-function context, and design guidance for engineers evaluating the AD6654BBC. The Request a Quote form on this page can be used to discuss sourcing, lifecycle status, and package-related procurement requirements without relying on stale static price information.

RFQ پەیوەندی
AD6654CBC - 14-Bit, 92.16 MSPS IF Receiver | Analog Devices
AD6654CBC

AD6654CBC - 14-Bit, 92.16 MSPS IF Receiver | Analog Devices

The Analog Devices AD6654CBC is a 14-bit, 92.16 MSPS mixed-signal IF-to-baseband receiver combining an analog-to-digital converter with a four- or six-channel multimode digital down-converter. It supports processing of up to six WCDMA channels and is packaged in a 256-CSPBGA configuration measuring 17 mm by 17 mm. An IF-to-baseband receiver is a mixed-signal integrated circuit that converts an analog intermediate-frequency signal into digital data and then reduces or filters that data into lower-frequency channels. Within the signal-chain hierarchy, it combines an ADC, a digital down-converter, programmable signal processing, and a high-density ball-grid-array package. This integration is useful when multiple receive channels must be digitized without requiring a separate ADC and digital processing assembly for each path. The AD6654CBC provides 14-bit conversion resolution, a 92.16 MSPS conversion rate, and four or six digital down-converter channels. Its multimode DDC can process as many as six WCDMA channels, making the device suitable for multichannel receivers that require coherent sampling and programmable digital channelization. The manufacturer identifies the AD6654 as not recommended for new designs, so engineers should assess lifecycle continuity carefully before beginning a long-lived platform. The product family combines a high-speed sampling stage with digital channel-selection functions. The six-channel device is the primary focus of the manufacturer documentation. On the four-channel version, Channels 4 and 5 are unavailable, while the underlying 14-bit, 92.16 MSPS ADC architecture remains part of the AD6654 family. This distinction is important when allocating digital resources or planning receiver configurations. Typical uses include WCDMA receiver infrastructure, multi-channel IF digitization, communications test equipment, and baseband processing platforms. The ADC converts the analog IF input into parallel digital samples, while the DDC performs frequency translation and filtering to produce lower-rate channel data. Integrating these functions can reduce the number of separate conversion and digital-processing stages required in a multichannel system. Board design should prioritize short, controlled analog-input routes, stable supply and reference distribution, and careful treatment of high-speed digital outputs. The 256-ball CSPBGA requires a dense multilayer PCB with via-in-pad structures or equivalent escape routing, adequate thermal management, and assembly-process support for the selected package. Designers should use the manufacturer pin-description table when assigning every ball and power domain. This product page combines the known converter and channelization specifications with practical implementation guidance, lifecycle context, package-aware comparisons, and engineering-oriented replacement analysis. It focuses on the decisions that affect receiver architecture, PCB implementation, signal integrity, and supply planning.

RFQ پەیوەندی
AD667JN/+ - 12-Bit DAC, 10V Output | Analog Devices
AD667JN/+

AD667JN/+ - 12-Bit DAC, 10V Output | Analog Devices

Analog Devices AD667JN/+ is a complete voltage-output 12-bit digital-to-analog converter with a maximum 10 V output, 4 microsecond settling time, and a 28-pin PDIP package. The device combines a high-stability buried Zener voltage reference, a double-buffered input latch, a precision bipolar current-steering DAC core, and an on-chip output amplifier. It is designed for microprocessor-compatible control, instrumentation, waveform generation, and industrial analog-output systems operating from dual positive and negative supplies. A digital-to-analog converter is a data-conversion integrated circuit that translates a digital code into a proportional analog voltage or current. The AD667 belongs to the voltage-output DAC hierarchy, which combines a digital interface, voltage reference, resistor network, output amplifier, and current-steering core on one monolithic chip. The double-buffered latch allows a new input word to be loaded while the previous code is being converted, supporting faster system updates than an unbuffered converter. Key features include 12-bit resolution, a maximum 10 V analog output, and approximately 4 microsecond settling time. The manufacturer also describes monotonicity as guaranteed over temperature and linearity as guaranteed over temperature at 1/2 LSB maximum. A laser-trimmed thin-film resistor network supports accuracy and repeatability, while the integrated buried Zener reference supplies the internal voltage needed by the converter. The AD667JN/+ is identified as a commercial-temperature, through-hole component. Internally, the AD667 uses 12 precision high-speed bipolar current-steering switches to implement the digital-to-analog conversion. The laser-trimmed resistor network and integrated reference remove the need for external precision reference components. Its microprocessor-compatible double-buffered input architecture supports digital control systems, while the integrated output amplifier provides a voltage output from a single converter package. Typical applications include closed-loop industrial control, programmable test equipment, digital waveform generation, laboratory instrumentation, data-acquisition systems, and legacy industrial automation platforms. The dual-supply arrangement accommodates bipolar output signals and analog circuits that require both positive and negative rail headroom. The through-hole PDIP package is also suitable for repair and modernization of legacy boards where a surface-mount converter would require layout changes. When designing around the AD667JN/+, verify the analog output range, supply polarity, settling-time requirement, and logic-interface voltage before assigning signals. Keep analog and digital return currents separated where practical, and use the manufacturer pin-description table to connect the input latch, reference, amplifier, and supply pins. Because the converter is a legacy through-hole device, confirm package pin compatibility during any replacement qualification. This page organizes the AD667JN/+ electrical characteristics, verified package information, direct replacement candidates, comparison parameters, and practical selection guidance. It emphasizes what an engineer must verify when using this converter in a new design or maintaining an existing analog-control board.

RFQ پەیوەندی
AD667KN/+ - 12-Bit Voltage Output DAC | Analog Devices
AD667KN/+

AD667KN/+ - 12-Bit Voltage Output DAC | Analog Devices

The Analog Devices AD667KN/+ is a single-channel, 12-bit voltage-output digital-to-analog converter with 28 leads in a PDIP package. It combines a high-stability buried-Zener voltage reference, a double-buffered input latch, and 12 precision bipolar current-steering switches. The AD667KN/+ is intended for microprocessor-compatible systems requiring a complete, referenced DAC without a separate external reference circuit. A digital-to-analog converter, or DAC, converts a digital code into a proportional analog voltage or current. The AD667 belongs to the broader DAC family within data-conversion integrated circuits and mixed-signal semiconductor systems. Unlike a digital potentiometer or passive resistor network, this converter includes both the conversion core and a voltage reference, allowing a digital system to generate an analog output from a numeric command. The primary feature of the AD667 is its 12-bit conversion resolution, providing 4096 digital output levels. Its architecture uses 12 precision high-speed bipolar current-steering switches and a laser-trimmed thin-film resistor network. The double-buffered input latch allows a new digital input to be loaded while the previous conversion result remains available at the output, which is useful in systems that require controlled output updates. A high-stability buried-Zener reference is integrated into the device. This reference supports the converter's voltage-output operation and removes the need for an external precision reference in basic single-channel designs. The AD667 is identified as a microprocessor-compatible converter, making its parallel digital interface suitable for processors, programmable controllers, and data-acquisition equipment that can latch a 12-bit command word. Typical uses include digital potentiometer emulation, programmable voltage sources, industrial control outputs, laboratory signal generation, and embedded instrumentation. Because the converter is complete and referenced, it can simplify analog-output subcircuits while preserving a direct digital control path. System designers should still account for the required bypass capacitors, analog-ground routing, output-load limits, and the settling behavior of the selected update sequence. The most important design consideration is separating analog and digital return paths appropriately. The Analog Devices AD667 datasheet identifies the analog ground connection as the high-quality ground point for the output amplifier and recommends connecting it directly to the system analog reference point. Careful grounding helps preserve the benefit of the integrated reference and reduces coupling from digital switching activity. This product page combines the manufacturer's converter architecture, package information, sourcing guidance, and engineering-focused design considerations. It also documents the available directly comparable AD667 option, supported technical questions, and practical implementation guidance for engineers evaluating the AD667KN/+ in legacy or availability-sensitive designs.

RFQ پەیوەندی
AD667SD/883B - 12-Bit DAC, 28-CDIP | Analog Devices
AD667SD/883B

AD667SD/883B - 12-Bit DAC, 28-CDIP | Analog Devices

The AD667SD/883B is a complete voltage output 12-bit digital-to-analog converter (DAC) from Analog Devices, featuring a high stability buried Zener voltage reference and a double-buffered input latch on a single chip. It is packaged in a 28-pin ceramic DIP (CDIP) and is designed for precision industrial and military applications. The device uses 12 precision high-speed bipolar current steering switches to achieve a settling time of 3 microseconds, ensuring fast and accurate analog output. A digital-to-analog converter (DAC) is an electronic component that converts digital binary data into an analog voltage or current. The AD667SD/883B is a voltage-output DAC, meaning it directly provides a voltage proportional to the digital input. It belongs to the family of data conversion ICs, which are essential in systems that interface digital processing with the analog world, such as microcontrollers, DSPs, and industrial control systems. The AD667 series is known for its high precision and stability, making it suitable for applications requiring accurate analog signals. Key features of the AD667SD/883B include 12-bit resolution, a single channel, and a settling time of 3 microseconds. The device operates from a +5V and -5V power supply, and it includes an internal buried Zener reference that provides excellent temperature stability. The double-buffered input latch allows for simultaneous updating of multiple DACs in a system, which is critical in multi-channel applications. The 28-pin CDIP package is hermetically sealed, offering enhanced reliability in harsh environments. Technically, the AD667SD/883B utilizes a current-steering architecture with a precision R-2R ladder network. The buried Zener reference ensures low noise and low drift over temperature, which is essential for high-accuracy applications. The device is designed to be microprocessor-compatible, with a parallel interface that can be easily connected to standard digital buses. The output voltage range is typically 0V to +10V or +/-5V, depending on the configuration, and it can drive loads up to 5mA. Typical applications include industrial process control, test and measurement equipment, and military/aerospace systems where high precision and reliability are paramount. The AD667SD/883B is also used in audio equipment for crystal-clear signal generation, as noted in comparison data. Its fast settling time and low glitch energy make it suitable for waveform generation and closed-loop control systems. When designing with the AD667SD/883B, it is important to provide adequate decoupling on the power supply pins and to ensure a clean analog ground plane. The reference output should be buffered if external loads are connected. Additionally, the digital inputs should be properly terminated to avoid noise-induced errors. The device is specified for operation over the full military temperature range of -55C to +125C, making it suitable for demanding environments.

RFQ پەیوەندی
AD6705 - 8-Bit Signal Conditioning ADC | Analog Devices
AD6705

AD6705 - 8-Bit Signal Conditioning ADC | Analog Devices

The AD6705 is an 8-bit, low-cost, signal conditioning analog-to-digital converter (ADC) from Analog Devices, designed for aerospace and industrial applications requiring precise analog-to-digital conversion with minimal external components. It integrates a complete signal conditioning front-end, including an instrumentation amplifier and a successive approximation register (SAR) ADC, enabling direct interface to sensors and transducers. The device operates from a single supply, simplifying power design and reducing system cost. An ADC (analog-to-digital converter) is a critical component in data acquisition systems that converts continuous analog signals into discrete digital values for processing by microcontrollers, DSPs, or FPGAs. The AD6705 belongs to the family of signal conditioning ADCs, which combine amplification, filtering, and conversion in a single package, reducing board space and improving noise immunity. This integration is essential in aerospace and industrial environments where signal integrity and reliability are paramount. Key features of the AD6705 include an 8-bit resolution, a single-supply operation, and a built-in signal conditioning front-end that accepts a wide range of input signals. The device offers a low-cost solution for applications that do not require high-resolution conversion but demand robustness and ease of use. Its aerospace-grade qualification ensures operation over extended temperature ranges and harsh conditions. Technically, the AD6705 employs a SAR architecture, which provides fast conversion times and low power consumption. The integrated instrumentation amplifier allows direct connection to bridge sensors, thermocouples, and other low-level signals, eliminating the need for external gain stages. The device also includes an internal reference, further reducing external component count. Typical applications include aerospace telemetry, industrial process control, and portable instrumentation. In aerospace, the AD6705 is used for monitoring pressure, temperature, and position sensors, where its reliability and signal conditioning capabilities are critical. In industrial settings, it interfaces with transducers in control loops, providing accurate digital data for process automation. When designing with the AD6705, ensure proper decoupling of the power supply and careful layout of the analog input traces to minimize noise. The device's single-supply operation simplifies power design, but attention to reference stability is necessary for accurate conversions.

RFQ پەیوەندی
AD670JN - 8-Bit Signal Conditioning ADC | Analog Devices
AD670JN

AD670JN - 8-Bit Signal Conditioning ADC | Analog Devices

The Analog Devices AD670JN is an 8-bit signal-conditioning analog-to-digital converter with two inputs, a successive-approximation register, and a microprocessor bus interface. The converter is supplied in a 20-pin PDIP package and operates as a complete monolithic signal-conditioning ADC, integrating an instrumentation-amplifier front end, DAC, comparator, SAR, precision voltage reference, and three-state output buffer. According to the manufacturer datasheet, no external components or user trims are required to interface the device. The AD670 is positioned as a low-cost converter for acquiring bipolar or unipolar sensor signals with input conditioning included on the same chip. Its specified conversion speed is 10 microseconds, making it suitable for control, measurement, and instrumentation systems that require an 8-bit result but do not need the resolution or throughput of a modern high-resolution ADC. The 20-pin PDIP package is a through-hole format rather than a compact surface-mount option, which can simplify prototyping and replacement on older industrial and instrumentation boards. The AD670JN is listed as obsolete by ZDI, so procurement should account for limited original-equipment availability and possible premium pricing. Its 8-bit resolution gives 256 quantization levels, while the integrated instrumentation front end reduces the number of external analog components required around the converter. Engineers should verify supply voltage, input range, common-mode limits, reference behavior, interface timing, and acquisition sequencing against the manufacturer datasheet before adapting the device to a new design. Because the product is obsolete, any new production design should normally preserve the AD670JN footprint only when no functional and lifecycle-qualified alternative exists. An ADC is an analog-to-digital converter, a semiconductor in the data-converter category that translates a continuous voltage into a digital code. The AD670JN belongs to the successive-approximation-register ADC family and combines that conversion mechanism with analog signal conditioning and a parallel microprocessor interface. A SAR ADC determines its result by successively comparing the input against an internally generated DAC level. The AD670 extends this basic conversion function with an instrumentation-amplifier front end, internal precision reference, comparator, and tri-state output buffer. This integration places the device in the hierarchy of ADC, data-converter IC, signal-conditioning converter, and general-purpose semiconductor. The integrated front end is especially relevant where a sensor produces a small differential signal riding on a larger common-mode voltage, because external amplification and offset conditioning would otherwise increase component count, board area, and calibration complexity. The primary features identified in the verified manufacturer materials include complete 8-bit signal conditioning, a differential-input instrumentation-amplifier front end, a precision internal voltage reference, a microprocessor bus interface, and a conversion speed of 10 microseconds. The differential front end supports direct connection of suitable sensor outputs and rejects common-mode voltage to the extent permitted by the device's operating limits. The internal DAC, comparator, and SAR form the conversion core, while the three-state output buffer permits controlled connection to shared data buses. Because the converter includes the major analog blocks, it can reduce external passive-component and trimming requirements. Its 8-bit resolution divides the supported measurement span into 256 codes, making it appropriate for position, level, threshold, and proportional feedback systems where one least-significant bit is adequate. The AD670JN uses a successive-approximation conversion architecture rather than a flash, pipeline, or sigma-delta architecture. SAR conversion is well suited to this device's stated 10-microsecond speed because it combines moderate throughput with an integrated monolithic implementation. The instrumentation-amplifier front end converts the conditioned input into a form that the comparator can evaluate against the internal DAC. During conversion, the successive-approximation logic successively updates the DAC, compares its voltage with the conditioned input, and records each comparison as one bit of the 8-bit result. The internal precision reference establishes the comparison scale. A microprocessor can read the converted byte through the parallel bus when the converter indicates completion. Tri-state outputs reduce bus contention when multiple converter outputs share a bus, provided the interface is sequenced correctly. Typical uses include industrial process measurement, laboratory instrumentation, transducer signal acquisition, closed-loop position control, and legacy embedded control equipment. The integrated front end is useful when the source is differential and its amplitude is within the AD670's input and common-mode limits. The 10-microsecond conversion rate permits sampling of relatively slow variables such as temperature, pressure, position, and analog control feedback. Because the converter resolution is only 8 bits, it should not be selected for applications requiring precise waveform reconstruction, high dynamic range, or fine quantization. The PDIP-20 package also favors through-hole legacy equipment and industrial control cards rather than compact wearable or high-density embedded systems. The obsolete lifecycle status makes continuity of supply a central selection consideration. The primary design concern is analog input conditioning. Engineers should verify the supported bipolar or unipolar input range, input impedance, common-mode range, differential input limits, and required source impedance against the manufacturer datasheet before applying external sensors. Grounding and decoupling must preserve reference stability and minimize conversion error. The microprocessor interface timing and output enable behavior must also be observed because the tri-state bus is intended for controlled system-level access. Since exact pin assignments, supply limits, and timing values were not supplied in the verified web data, they must not be inferred from generic AD670-family descriptions. New designs should also account for obsolescence, counterfeit screening, and a possible PCB redesign if a currently supported converter offers better resolution, packaging, or lifecycle assurance. This page consolidates the verified distributor and manufacturer information for the AD670JN, including its obsolete status, 8-bit SAR architecture, 10-microsecond conversion speed, 20-pin PDIP package, pricing indication, and engineering-oriented replacement considerations. It also distinguishes verified facts from data requiring confirmation from the full manufacturer datasheet. That distinction is important for an obsolete converter, where package variants, temperature grades, screening levels, and supply conditions can materially affect drop-in qualification.

RFQ پەیوەندی
AD670JP - 8-Bit 2-Input SAR ADC | Analog Devices | PLCC-20
AD670JP

AD670JP - 8-Bit 2-Input SAR ADC | Analog Devices | PLCC-20

The Analog Devices AD670JP is an 8-bit, 2-input successive-approximation register analog-to-digital converter in a 20-pin PLCC package measuring 9 mm by 9 mm. It provides a parallel digital interface and supports bipolar or unipolar input configurations through an integrated signal-conditioning path. The AD670JP is designed for compact industrial measurement and control systems where an 8-bit conversion result is sufficient but the added flexibility of differential input and internal reference can simplify board design. An ADC is an integrated circuit that converts a continuously varying analog voltage into a numeric code. Within the semiconductor hierarchy, the AD670JP belongs to the data-converter IC class and more specifically to the ADC category. Its successive-approximation register architecture compares the unknown input against an internal DAC, one binary bit at a time, until the converted code is resolved. Parallel output presents the completed digital result directly on dedicated output pins rather than relying on a serial clock and data line. The AD670JP provides one converter with two input connections and 8-bit resolution. The 20-pin PLCC package supports surface-mount assembly, while the AD670 family also includes A-grade and B-grade versions specified from -40 °C to +85 °C and an S grade specified from -55 °C to +125 °C. Internal reference architecture, differential input, and selectable input polarity broaden its usefulness for transducer, control, and instrumentation applications. Because its resolution is 8 bits, the converter provides 256 discrete output codes. The AD670JP is therefore appropriate where precise proportional measurement, position sensing, process monitoring, or digital control is more important than fine quantization. Because parallel outputs require dedicated board routing and shielding from switching noise, the device is generally better suited to moderate-speed acquisition than to high-pin-count, very high-rate converter systems. Typical applications include industrial sensor interfaces, digital thermometry, analog control-loop monitoring, position and transducer measurement, panel meters, and low-cost embedded data-acquisition boards. A PLCC footprint also makes AD670JP relevant to legacy industrial equipment and maintenance inventories where changing the original converter would require redesigning the PCB rather than merely replacing the component. The main design consideration is that an 8-bit result limits system resolution to roughly 0.4% of full scale after accounting for endpoint behavior and practical signal conditioning. The board should provide clean analog routing, adequate bypassing, and input protection appropriate to the measured signal. Compatibility with a replacement part must be confirmed from the manufacturer datasheet rather than inferred from the converter resolution alone. This page consolidates the verified distributor listing, manufacturer family information, package details, temperature-grade options, and cross-reference evidence for AD670JP. It also identifies where public data is incomplete, including pricing, sampling rate, exact pin naming, and confirmed multi-part substitutes, so engineers can make sourcing decisions without treating unavailable specifications as established facts.

RFQ پەیوەندی
AD670KN - 8-Bit Signal Conditioning ADC | Analog Devices
AD670KN

AD670KN - 8-Bit Signal Conditioning ADC | Analog Devices

Analog Devices AD670KN is a complete 8-bit signal-conditioning analog-to-digital converter with two analog input channels, a 5 V supply, and a conversion time of 10 µs. The monolithic device integrates an instrumentation-amplifier front end, DAC, comparator, successive-approximation register, precision voltage reference, and tri-state output buffer. It is offered in a 20-pin ceramic DIP package for the K-temperature grade. An ADC is a signal-conditioning ADC that converts an analog input voltage into a digital code for processing, measurement, logging, or control. The AD670 belongs to the broader ADC and data-converter hierarchy within integrated circuits. Unlike a bare flash or successive-approximation converter, the AD670 combines input amplification, reference generation, conversion, and digital output buffering on one monolithic device. The AD670KN requires no external components or user calibration trims for normal operation, simplifying analog-system implementation. Its 8-bit resolution corresponds to 256 digital output codes, making it appropriate for position, level, process-control, and instrumentation measurements that do not require higher conversion resolution. The integrated voltage reference supports repeatable conversion behavior, while the tri-state output buffer provides controlled output-bus connection and disconnection. Internally, the converter uses a successive-approximation register with comparator and DAC feedback to determine each digital result. The instrumentation-amplifier front end conditions the analog signal before conversion, reducing the number of external signal-conditioning stages required. This integrated architecture is particularly useful when the source has a limited voltage range and the application requires a complete converter rather than a bare ADC core. Typical uses include industrial process measurement, laboratory instrumentation, sensor interfaces, data acquisition, embedded control, and legacy equipment requiring an 8-bit conversion function. Two analog channels support dual-input measurements or differential-style sampling when paired with the appropriate signal arrangement. The 10 µs conversion time permits updates in the low-kilohertz range, depending on acquisition timing and system overhead. Designers should account for the analog input range, acquisition timing, reference behavior, output coding, and electrical characteristics stated in the manufacturer datasheet. Confirm pin assignments, input common-mode limits, and timing requirements before layout because the AD670KN uses a 20-pin ceramic DIP rather than a surface-mount package. The complete integration reduces external circuitry but leaves less routing flexibility than a modular converter.

RFQ پەیوەندی
AD670KP - 8-Bit 10 us Dual-Input SAR ADC | Analog Devices
AD670KP

AD670KP - 8-Bit 10 us Dual-Input SAR ADC | Analog Devices

The Analog Devices AD670KP is a complete 8-bit signal-conditioning analog-to-digital converter with two analog inputs, a 10 microsecond conversion time, and parallel digital output in a 20-terminal PLCC package. It integrates an instrumentation-amplifier front end, DAC, comparator, successive-approximation register, precision voltage reference, and three-state output buffer on one monolithic bipolar chip. According to the manufacturer product page, the K grade is specified from 0°C to +70°C and is offered in a 20-terminal PLCC package. An ADC converts an analog voltage into a digital code for measurement, control, instrumentation, or data acquisition. The AD670KP belongs to the SAR ADC family: a successive-approximation register compares the input against an internally generated DAC level during successive clock cycles. SAR ADCs are useful where parallel outputs, modest resolution, moderate conversion speed, and integrated signal conditioning are more important than compact serial-interface power savings. The integrated instrumentation amplifier is particularly relevant for sensors and low-level differential signals. Verified source data identifies the AD670KP as an 8-bit parallel-output ADC with two analog input channels, a 0.195% linearity-error figure, and a 10 microsecond conversion time. The device needs no external components or user trims for full-accuracy operation according to the retrieved datasheet description. Its precision voltage reference supports a self-contained conversion chain, while the three-state output buffer can provide a controlled output state for shared digital buses. The monolithic bipolar implementation combines analog input conditioning and digital conversion logic in one package. This integration reduces the number of external precision components and simplifies board-level signal-chain design. A parallel 8-bit interface is appropriate for processors, programmable controllers, counters, data loggers, and embedded systems that can latch the converted code directly. Because only 8 bits are available, the converter is better suited to coarse measurements, position feedback, process monitoring, and control loops than to high-resolution signal analysis. Typical uses include industrial process measurement, sensor-interface systems, panel controls, instrumentation, and embedded data acquisition. The dual inputs allow the converter to monitor more than one analog quantity when system timing and multiplexing requirements permit. Designers should verify input range, acquisition timing, logic levels, reference behavior, and output timing against the current Analog Devices datasheet before fixing the PCB or firmware. A key integration advantage is that the instrumentation amplifier, DAC, comparator, SAR logic, voltage reference, and tri-state output buffer are combined on one chip. The trade-off is its 8-bit resolution: it provides economical acquisition but cannot distinguish finely spaced analog levels as effectively as a 12-bit or higher-resolution converter. This page synthesizes the verified AD670KP specifications, sourcing links, application guidance, and replacement limitations. It does not infer unverified electrical limits or invent drop-in substitutes where the available cross-reference data does not establish same-package, pin-compatible alternatives.

RFQ پەیوەندی
AD673JD - 8-Bit SAR ADC, 30 us | Analog Devices
AD673JD

AD673JD - 8-Bit SAR ADC, 30 us | Analog Devices

Analog Devices AD673JD is a complete 8-bit successive-approximation analog-to-digital converter with a 30 us maximum conversion time, integrating a DAC, voltage reference, clock, comparator, successive-approximation register, and three-state output buffers on one monolithic chip. The device supports unipolar and bipolar inputs, operates from +5 V and -15 V supplies, and is packaged in a 20-pin ceramic dual in-line package. An ADC is a data-conversion component that transforms an analog voltage into a digital number for processing, measurement, or control. Successive-approximation, or SAR, ADCs repeatedly compare the input against an internal DAC until their difference falls within the converter's resolution. The AD673JD belongs to the ADC and DAC category within integrated circuits and offers a simple parallel data interface for microprocessor-based measurement systems. The converter's principal features include complete 8-bit conversion, no missing output codes over temperature, and support for either full or 16-bit microprocessor bus interfacing. Its integrated reference, clock, comparator, DAC, and register reduce the number of external components required in a measurement circuit. Three-state output buffers permit the data bus to be placed into a high-impedance state when multiple devices share common bus lines. The AD673 uses a successive-approximation conversion architecture in which an internal DAC generates trial voltages during each conversion cycle. A comparator evaluates the trial voltage against the analog input, and the successive-approximation register records the binary decision sequence. The resulting eight digital outputs represent the converted input, while the conversion-status output can support processor-controlled acquisition timing. Typical uses include industrial process measurement, instrumentation, data acquisition, embedded control, and legacy microprocessor interfaces. The device is particularly useful where an 8-bit measurement resolution is sufficient but a complete converter with an internal reference is preferred over a discrete resistor ladder and external comparator. The principal design consideration is the negative supply requirement. Layout should keep analog input and reference paths away from digital switching traces, while decoupling should follow the connection and grounding recommendations in the manufacturer datasheet. Because the AD673JD operates with +5 V and -15 V supplies, system designers should verify negative-rail generation and signal-reference compatibility before layout release. This product page organizes the AD673JD specifications, functional characteristics, application guidance, and same-footprint upgrade choices for faster engineering evaluation. It also identifies where the complete pin assignment and detailed electrical limits must be confirmed in the manufacturer datasheet before a new PCB is manufactured.

RFQ پەیوەندی
AD673JN - 8-Bit SAR ADC with Reference | Analog Devices
AD673JN

AD673JN - 8-Bit SAR ADC with Reference | Analog Devices

Analog Devices AD673JN is a complete 8-bit successive-approximation analog-to-digital converter with an integrated DAC, voltage reference, clock, comparator, successive-approximation register, and three-state output buffers. It converts a unipolar or bipolar analog input through a 20-pin plastic DIP package and supports microprocessor interfacing through full-byte or 16-bit bus modes. An ADC converts a continuously varying analog voltage into a digital value for processing, measurement, or control. The AD673 belongs to the successive-approximation ADC category, within the broader hierarchy of data-converter ICs and signal-processing semiconductors. Rather than requiring a separate reference, comparator, clock, and internal DAC, the AD673 combines these functions on one monolithic chip, simplifying instrumentation and industrial data-acquisition designs. Key features include 8-bit resolution, a maximum conversion time of 30 microseconds, unipolar and bipolar input capability, and no missing codes over the specified temperature range. The converter operates from +5 V and -15 V supplies, while its integrated voltage reference, internal clock, and three-state output buffers reduce external component count. These characteristics suit process monitoring, digital instrumentation, industrial control, and embedded measurement systems requiring deterministic acquisition timing. The internal successive-approximation function uses integrated injection logic, and the internal DAC uses a laser-trimmed, high-stability silicon-chromium thin-film resistor ladder. A temperature-compensated subsurface Zener reference supports stable conversion performance. Full-byte or 16-bit microprocessor bus interface options allow the converter to operate with processors using either byte-oriented or wider parallel data arrangements. Typical applications include industrial process measurement, laboratory data-acquisition systems, digital panel meters, embedded control platforms, and legacy computer interface cards. In each case, the integrated converter functions simplify the analog front end while the 30 microsecond maximum conversion time provides a defined upper bound for sampling cycles. When designing the circuit, preserve the negative supply arrangement required by the converter and use the manufacturer pin-description table when assigning data-bus and control signals. Verify input range, output coding, timing, and acquisition-system settling requirements against the Analog Devices AD673 datasheet before fixing the analog front-end and bus timing. This product overview combines the converter architecture, interface considerations, drop-in family options, and practical selection guidance into an engineering-focused reference for designers evaluating the AD673JN for new or legacy data-acquisition equipment.

RFQ پەیوەندی
AD674BTE/883B - 12-Bit SAR ADC, 28-CDIP | Analog Devices
AD674BTE/883B

AD674BTE/883B - 12-Bit SAR ADC, 28-CDIP | Analog Devices

The AD674BTE/883B is a complete 12-bit successive approximation analog-to-digital converter (ADC) from Analog Devices, featuring an internal high-precision voltage reference and clock. It is packaged in a 28-pin ceramic dual-in-line package (CDIP) and is designed for direct interface to 8- and 16-bit microprocessor buses via three-state output buffers. The device operates from ±12V and +5V supplies and converts in a maximum of 15 microseconds, making it suitable for high-speed data acquisition systems. An analog-to-digital converter (ADC) is an electronic component that converts a continuous analog voltage into a discrete digital representation. The AD674BTE/883B is a successive approximation register (SAR) ADC, which uses a binary search algorithm to determine the digital output. SAR ADCs are known for their high speed and moderate resolution, making them ideal for industrial control, instrumentation, and data acquisition. The AD674B family is pin-compatible with the industry-standard AD574A but offers faster conversion time and lower power consumption. Key features of the AD674BTE/883B include 12-bit resolution, a maximum conversion time of 15 µs, and an internal 10V reference. It accepts bipolar input ranges of ±5V and ±10V, as well as unipolar 0V to 10V and 0V to 20V, selectable via pin strapping. The device includes a three-state output buffer for direct bus interfacing and operates over the extended temperature range of -55°C to +125°C, meeting MIL-STD-883B standards. Technically, the AD674BTE/883B integrates a precision voltage reference, clock, and comparator on-chip, reducing external component count. The SAR architecture ensures monotonicity and no missing codes over the full temperature range. The device features a 12-bit parallel output with a status pin (STS) that indicates conversion completion, simplifying microprocessor handshaking. The 28-pin CDIP package provides excellent thermal and mechanical stability for harsh environments. Typical applications include military and aerospace data acquisition, industrial process control, medical instrumentation, and scientific analysis equipment. The device's wide operating temperature range and high reliability make it suitable for mission-critical systems where accuracy and durability are paramount. When designing with the AD674BTE/883B, ensure proper decoupling of the power supplies and a clean analog ground plane to minimize noise. The internal reference can be overridden by an external reference for improved accuracy, but the internal reference is sufficient for most applications. The conversion start (CE, CS, R/C) control pins allow flexible timing, and the STS pin can be used to trigger interrupts or polling routines.

RFQ پەیوەندی