بەرهەمەکان (5,100+)

WM8750CLSEFL - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8750CLSEFL

WM8750CLSEFL - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8750CLSEFL is a 24-bit stereo audio codec with two ADC channels, two DAC channels, and a 32-pin QFN package measuring 5 mm by 5 mm. It is designed for portable audio systems and can operate as either an audio master or slave, supporting master-clock arrangements for USB devices and standard audio sample-rate systems. An audio codec is an integrated circuit that converts between digital audio data and analog signals. The WM8750 belongs to the codec hierarchy within interface ICs, combining stereo conversion, headphone and speaker output functions, digital audio interfaces, clocking, and analog signal conditioning. This integration reduces the number of discrete components required in portable playback and recording equipment while providing a common control interface for the conversion channels. The codec uses 24-bit conversion for both its ADC and DAC paths and includes two ADC and two DAC channels for stereo operation. Its digital audio processing can work with master clocks of 12 MHz or 24 MHz for USB devices. Standard master-clock frequencies of 12.288 MHz and 24.576 MHz support common audio rates, including 96 kHz, 48 kHz, and 44.1 kHz, without requiring an external PLL. The manufacturer datasheet describes flexible master and slave operation, allowing the WM8750 to integrate with a system master clock or provide clocking to another audio device. The 5 mm by 5 mm QFN package supports compact portable-audio layouts, while its exposed-pad construction requires a properly designed PCB thermal and electrical land pattern. Typical uses include portable media players, USB-connected audio accessories, headphone amplifiers, digital speaker systems, and compact recording products. The combination of stereo conversion, flexible clocking, headphone and speaker outputs, and direct support for widely used sample rates makes the device suitable for designs that require a single audio conversion and output subsystem. PCB implementation should follow the manufacturer’s reference layout for the 32-QFN footprint, including its exposed thermal pad. Input and output filtering networks, analog ground planning, clock routing, and supply decoupling must be evaluated together to preserve audio performance. The codec should not be treated as a generic digital IC because its usable performance also depends on component tolerances, grounding, and the analog output network. This product overview combines the verified device identity and package information with clock-rate, channel-count, conversion-resolution, application, and replacement guidance. It also identifies the boundaries of drop-in substitution: a replacement is suitable only when its footprint, electrical behavior, control interface, and clock requirements are confirmed rather than inferred from similar codec functionality.

RFQ پەیوەندی
WM8750CLSEFL/R - 24-Bit Stereo Audio Codec | Cirrus Logic (Tape & Reel)
WM8750CLSEFL/R

WM8750CLSEFL/R - 24-Bit Stereo Audio Codec | Cirrus Logic (Tape & Reel)

Cirrus Logic WM8750CLSEFL/R is a 24-bit stereo audio codec with two ADC channels, two DAC channels, and a 32-pin QFN package measuring 5 mm by 5 mm. It is designed for portable audio systems and can operate as either an audio master or slave, supporting master-clock arrangements for USB devices and standard audio sample-rate systems. An audio codec is an integrated circuit that converts between digital audio data and analog signals. The WM8750 belongs to the codec hierarchy within interface ICs, combining stereo conversion, headphone and speaker output functions, digital audio interfaces, clocking, and analog signal conditioning. This integration reduces the number of discrete components required in portable playback and recording equipment while providing a common control interface for the conversion channels. The codec uses 24-bit conversion for both its ADC and DAC paths and includes two ADC and two DAC channels for stereo operation. Its digital audio processing can work with master clocks of 12 MHz or 24 MHz for USB devices. Standard master-clock frequencies of 12.288 MHz and 24.576 MHz support common audio rates, including 96 kHz, 48 kHz, and 44.1 kHz, without requiring an external PLL. The manufacturer datasheet describes flexible master and slave operation, allowing the WM8750 to integrate with a system master clock or provide clocking to another audio device. The 5 mm by 5 mm QFN package supports compact portable-audio layouts, while its exposed-pad construction requires a properly designed PCB thermal and electrical land pattern. Typical uses include portable media players, USB-connected audio accessories, headphone amplifiers, digital speaker systems, and compact recording products. The combination of stereo conversion, flexible clocking, headphone and speaker outputs, and direct support for widely used sample rates makes the device suitable for designs that require a single audio conversion and output subsystem. PCB implementation should follow the manufacturer’s reference layout for the 32-QFN footprint, including its exposed thermal pad. Input and output filtering networks, analog ground planning, clock routing, and supply decoupling must be evaluated together to preserve audio performance. The codec should not be treated as a generic digital IC because its usable performance also depends on component tolerances, grounding, and the analog output network. This product overview combines the verified device identity and package information with clock-rate, channel-count, conversion-resolution, application, and replacement guidance. It also identifies the boundaries of drop-in substitution: a replacement is suitable only when its footprint, electrical behavior, control interface, and clock requirements are confirmed rather than inferred from similar codec functionality.

RFQ پەیوەندی
WM8750LSEFL - Stereo Audio Codec with Speaker | Wolfson
WM8750LSEFL

WM8750LSEFL - Stereo Audio Codec with Speaker | Wolfson

The Wolfson Microelectronics WM8750LSEFL is a stereo audio codec with headphone and speaker outputs, designed for portable audio applications. It combines a 98 dB A-weighted DAC signal-to-noise ratio, a 95 dB A-weighted ADC signal-to-noise ratio, a mono 400 mW BTL speaker driver, and a headphone output capable of delivering more than 40 mW into 16 ohms from a 3.3 V supply. An audio codec is an integrated circuit that converts between digital audio data and analog microphone, headphone, and speaker signals. In the signal-chain hierarchy, the WM8750LSEFL is an audio codec, a mixed-signal interface IC, and a power-management-assisted audio output device. Its integrated converter, microphone interface, headphone amplifier, and speaker driver reduce the number of external components required in portable playback, recording, and communication equipment. The device supports a complete stereo or mono microphone interface with programmable automatic level control and a noise gate. The 98 dB A-weighted DAC SNR and -95 dB total harmonic distortion at 48 kHz and 3.3 V support low-noise digital-to-analog playback. Its 95 dB A-weighted ADC SNR and -90 dB total harmonic distortion at the same operating condition provide symmetrical recording performance when low distortion is important. Output integration provides practical advantages for portable systems. The mono bridge-tied-load speaker driver can deliver 400 mW without requiring a separate power amplifier, while the integrated headphone driver can supply more than 40 mW into a 16-ohm load at 3.3 V. These functions are controlled through the codec interface, allowing software-managed audio routing and gain configuration. Typical uses include portable media players, personal audio devices, smart-home audio endpoints, headset electronics, compact recording products, and battery-powered communication equipment. Its integrated speaker and headphone paths are especially useful where PCB area, component count, and power-management complexity must be controlled without sacrificing essential playback functions. When laying out a circuit, use the manufacturer pin-description table and application schematic to assign analog, digital, and power connections. Keep microphone inputs and headphone outputs away from high-speed digital traces, provide the recommended decoupling capacitors at their supply pins, and verify speaker impedance and thermal conditions against the datasheet limits. This product record combines the WM8750LSEFL feature information with practical guidance on audio performance, layout, thermal considerations, component pairing, and replacement selection. It is structured to help engineers identify the correct codec, compare its integrated functions, and plan a robust portable-audio implementation before layout release.

RFQ پەیوەندی
WM8759GED/V - 24-Bit 192kHz Stereo DAC | Wolfson
WM8759GED/V

WM8759GED/V - 24-Bit 192kHz Stereo DAC | Wolfson

Wolfson Microelectronics WM8759GED/V is a 24-bit, 192kHz stereo digital-to-analog converter with an integrated headphone buffer. It provides line-level and headphone output connections for portable DVD players, MP3 players, and other consumer audio equipment. The converter combines digital audio playback, stereo DAC conversion, and headphone amplification in one integrated circuit, reducing the need for separate output-driver stages in compact products. A stereo DAC is an audio signal-chain component that converts digital PCM audio samples into analog left and right channel voltages. It belongs to the broader digital-to-analog converter and audio interface hierarchy. An integrated headphone buffer further conditions those analog signals for headphone loads, allowing the WM8759GED/V to serve both fixed-line and variable-headphone outputs within portable consumer-audio designs. The verified manufacturer-datasheet description identifies the principal audio capabilities as 24-bit resolution, operation up to 192kHz, stereo conversion, an integrated headphone driver, line output, and headphone output. These specifications make the device relevant to digital media players and other systems that reproduce CD-quality or higher-resolution digital audio and require both line-level and headphone connections. The WM8759GED/V's architecture combines a stereo DAC section with a headphone-output stage rather than treating headphone drive as a completely separate function. Integrating those blocks can simplify system partitioning and reduce board area. The precise digital interface format, analog performance figures, clocking requirements, output topology, and supported sample-rate details require confirmation from the complete manufacturer datasheet and must not be inferred from the available distributor summary. Typical uses include portable DVD players, MP3 players, and consumer equipment featuring line and headphone outputs. Its 24-bit, 192kHz capability supports high-resolution digital-audio paths, while the integrated headphone buffer is especially useful where a product needs both an external line connection and a direct headphone connection without adding another discrete output buffer. Designers should verify the exact 32-lead QFN footprint, exposed-pad requirements, decoupling, analog routing, and digital interface timing before layout release. Headphone and line outputs should also be checked for load compatibility, startup behavior, and channel alignment. Because the verified web results provide only a functional summary, unavailable electrical, environmental, and package details are marked separately rather than estimated. This page consolidates the verified WM8759GED/V function, distributor availability information, qualified same-family references, and practical selection guidance. It distinguishes documented capabilities from parameters that still require confirmation, helping engineers locate the datasheet, assess replacement risk, and plan a portable-audio design without presenting unverified specifications as facts.

RFQ پەیوەندی
WM8770ASIFT/V - 24-Bit 8-Channel Audio Codec | Cirrus
WM8770ASIFT/V

WM8770ASIFT/V - 24-Bit 8-Channel Audio Codec | Cirrus

The Cirrus Logic WM8770ASIFT/V is a 24-bit, eight-channel audio codec with analogue volume control and a maximum sampling rate of 192 kHz, supplied in a 64-pin TQFP package. It combines multichannel digital audio conversion with analogue signal conditioning for professional audio, consumer electronics, communications, and test equipment designs. The WM8770 family supports 24-bit serial audio and integrates eight channels of audio processing into a single device. An audio codec is a semiconductor that converts digital audio data into analogue signals and, in a bidirectional design, converts analogue audio into a digital PCM stream. In the signal-processing hierarchy, the WM8770 belongs to the audio codec class, combining an audio digital-to-analogue converter, analogue-to-digital converter, volume control, serial digital interface, and supporting analogue circuitry. Its role is to connect digital audio sources or processors to analogue input and output stages while preserving a common sampling and bit-depth framework. The primary specifications are 24-bit resolution, eight audio channels, and operation up to 192 kHz. Analogue volume control provides adjustable signal level within the codec rather than relying entirely on external attenuators. The 64-pin TQFP package offers enough pins for the multichannel analogue interfaces and digital control connections, while its surface-mount construction is suitable for compact, automated PCB assembly. The architecture is tailored for audio systems requiring multiple simultaneous channels rather than a simple stereo codec. Serial digital audio data, analogue channels, volume control, and device configuration must be considered together when establishing the system clock, channel format, input and output routing, and analogue signal scaling. Incorrect master-clock or serial-interface configuration can prevent correct decoding even when individual analogue signals are present. Typical uses include multichannel recording equipment, broadcast and studio audio systems, active speaker and amplifier modules, USB or network audio gateways, automotive infotainment platforms, and laboratory audio analysers. The eight-channel architecture is particularly useful where simultaneous playback, capture, monitoring, or line-level routing is required within one subsystem. PCB design should provide a continuous ground reference, keep analogue and digital return paths controlled, place decoupling capacitors close to the supply pins, and route high-frequency digital signals away from sensitive analogue inputs. The datasheet pin-description and application circuits should be used when assigning every pin and selecting external component values. This page combines the WM8770 family specifications with package guidance, comparison parameters, sourcing instructions, and practical integration notes. It helps engineers separate confirmed device characteristics from details that must still be checked against the latest manufacturer documentation before schematic release or production qualification.

RFQ پەیوەندی
WM8770SIFT/RV - 24-Bit 8-Channel Audio Codec | Cirrus Logic
WM8770SIFT/RV

WM8770SIFT/RV - 24-Bit 8-Channel Audio Codec | Cirrus Logic

The Cirrus Logic WM8770SIFT/RV is a 24-bit, eight-channel audio codec designed for surround-sound processing in home hi-fi, automotive, and audiovisual equipment. It supports operation up to 192 kHz, uses a serial data interface, and is packaged in a 64-pin TQFP measuring 10 mm by 10 mm. The codec combines one ADC with four DAC outputs for multichannel signal conversion and volume control. An audio codec is an integrated-circuit category that converts digital audio data into analog signals, converts analog audio into digital data, and controls signal levels within an audio system. Within the broader hierarchy, the WM8770 belongs to the audio codec class, then to interface ICs, and ultimately to integrated circuits. It reduces the number of separate converters, amplifiers, and volume-control components required around a digital audio processor. The WM8770 provides 24-bit resolution, eight-channel operation, and sampling rates up to 192 kHz. Its one ADC and four DAC arrangement supports designs in which multiple analog outputs require independent digital-to-analog conversion. Serial interface operation helps simplify connection to a digital signal processor or audio host while reducing parallel routing requirements. Its 2.7 V to 3.6 V operating range supports common low-voltage digital audio systems. Technically, the WM8770 integrates conversion and volume-control functions rather than requiring separate digital-to-analog converters for each output. The 10 mm by 10 mm TQFP provides a surface-mount solution with 64 package leads. The WM8770SIFT/RV ordering suffix identifies a specific reel-packaged device configuration, while the underlying WM8770 family is associated with surround-sound and high-performance multichannel audio applications. Typical uses include home theater receiver back ends, surround-sound decoding systems, automotive head-unit audio paths, digital television equipment, and powered speakers with centralized volume control. The eight-channel codec architecture is particularly useful where a system processes multiple surround channels but does not require a separate conversion IC for every analog output. Board design should follow the manufacturer pin-description table when assigning power, ground, analog, digital, and interface connections. Pay particular attention to analog and digital ground partitioning, decoupling placement, and the layout of audio input and output traces. Stable reference, clock, and supply arrangements are especially important when maximizing the codec's 24-bit, 192 kHz operating capability. This page combines the exact package and codec characteristics with practical design guidance, same-footprint replacement analysis, and a parameter-level comparison. It is intended to help engineers identify whether the WM8770SIFT/RV matches an existing audio architecture and what must be checked before approving a board substitution.

RFQ پەیوەندی
WM8770SIFT/V - 24-Bit 8-Channel Audio Codec | Cirrus Logic
WM8770SIFT/V

WM8770SIFT/V - 24-Bit 8-Channel Audio Codec | Cirrus Logic

The Cirrus Logic WM8770SIFT/V is a high-performance, 8-channel audio codec with 24-bit resolution, a maximum sampling rate of 192 kHz, integrated volume control, and a 64-pin TQFP package. It is designed for multichannel surround-sound processing in home hi-fi, automotive, and audiovisual equipment. The codec combines multichannel signal conversion with programmable volume control, reducing the number of external audio-processing components required in a complex sound system. An audio codec is an interface IC that converts digital audio data into analog signals and analog audio into digital data. The WM8770 belongs to the broader codec hierarchy that includes audio codecs, data converters, signal-processing semiconductors, and interface ICs. Its 8-channel architecture supports surround-sound and multichannel audio paths, while the 24-bit conversion format accommodates high-resolution consumer and automotive audio systems. According to the manufacturer datasheet, the WM8770 uses a stereo 24-bit multibit sigma-delta ADC for the analog-to-digital conversion function. The headline capabilities of the WM8770 include eight audio channels, 24-bit conversion, operation up to 192 kHz, digital volume control, and a serial audio interface. These features make it useful where several synchronized audio channels must be converted or controlled through a common codec. The digital volume function can provide centralized level management across multiple channels, which is valuable in surround processors, receivers, automotive head units, and other equipment with several playback or recording paths. The WM8770SIFT/V is packaged in a 64-pin TQFP, a surface-mount package suited to multilayer PCB assemblies. Its 64-pin count provides the interconnections required for multiple analog channels, digital control signals, serial audio data, clocking, and power. The 192 kHz capability supports high-rate digital audio workflows, while the 24-bit resolution gives designers headroom for filtering and signal-chain headroom. The codec's principal system trade-off is its relatively high channel and pin count compared with a stereo codec, making it most appropriate when multichannel integration is more important than minimum footprint or power. Typical uses include home-theater surround processing, automotive infotainment, powered speakers, multichannel amplifiers, home audiovisual equipment, and audio/video receivers. In these systems, the codec can centralize digital-to-analog conversion and volume control while reducing the need for separate channel-conversion and attenuation stages. Firmware and system integration must still account for serial interface format, clocking, supported sample rates, analog routing, and the required bypass or soft-mute behavior. PCB implementation should place analog and digital return paths carefully and preserve the layout practices described in the manufacturer application guidance. Keep sensitive analog traces short, provide clean references around converter inputs and outputs, route high-speed digital signals away from analog nodes, and decouple supply pins close to the device. Verify the serial audio master or slave relationship, sample-rate support, and channel mapping in the final system design. This product page organizes the WM8770SIFT/V specifications, application guidance, comparison parameters, and design considerations into one engineering-focused reference. It also distinguishes verified codec attributes from detailed electrical values that require confirmation against the current manufacturer datasheet before schematic release or PCB sign-off.

RFQ پەیوەندی
WM8772SEDS/RV - 24-Bit 6-Channel Audio Codec | Cirrus Logic
WM8772SEDS/RV

WM8772SEDS/RV - 24-Bit 6-Channel Audio Codec | Cirrus Logic

The Cirrus Logic WM8772SEDS/RV is a 24-bit, six-channel audio codec with a 192 kHz maximum sampling rate, one ADC, three DACs, and an SPI control interface in a 28-pin SSOP package. It combines a 100 dB ADC signal-to-noise ratio with a 103 dB DAC signal-to-noise ratio, making it suitable for multichannel consumer audio, home entertainment, and active-speaker signal-chain designs. An audio codec is an integrated circuit that converts between analog audio signals and digital PCM data. The WM8772 belongs to the broader codec hierarchy of interface ICs, audio converters, signal-processing semiconductors, and data-conversion ICs. Its sigma-delta conversion architecture supports high-resolution audio while providing a digital interface for configuration and sample-data transfer. The SPI control connection allows a host processor to program operating parameters and exchange audio data over a compact serial link. Key features include 24-bit conversion, six-channel operation, support for sampling rates up to 192 kHz, one ADC, three DACs, and separate ADC and DAC signal-to-noise figures of 100 dB and 103 dB. The device uses a 28-SSOP surface-mount package identified as PDSO28, with a body size of 10.20 mm by 5.30 mm and a stated height of 1.75 mm. It is also identified as lead-free, supporting compact, high-density audio equipment designs. The WM8772SEDS/RV combines an analog audio input path, three digital-to-analog conversion channels, and one analog-to-digital conversion channel in a single device. This integration can reduce the number of separate converters required in a six-channel system. The 103 dB DAC signal-to-noise ratio is 3 dB higher than the 100 dB ADC figure, making the playback paths the device's strongest specified noise-performance area. The 192 kHz capability supports high-resolution source material when the surrounding system clock, digital interface, analog circuitry, and output stage support that rate. Typical uses include surround-sound receivers, multimedia speakers, digital active speakers, audio docking systems, and embedded playback platforms. In these applications, the codec accepts or generates multiple audio channels while a host processor controls configuration through SPI. The device is also suitable for prototype platforms that need multiple conversion channels without using three separate DAC packages and an additional ADC. Circuit layout should preserve the integrity of both analog and digital sections. Keep the codec's supply and ground connections close to their package pins, place recommended bypass capacitors at the associated power pins, and route high-speed SPI signals away from sensitive audio inputs. Confirm all supported clock, interface, and bypass-component requirements against the manufacturer datasheet before releasing the PCB layout. This product page combines the WM8772SEDS/RV's principal conversion specifications with application-specific design guidance, replacement analysis, and a practical view of its SSOP-28 implementation. It is intended to help engineers evaluate codec architecture, interface routing, channel requirements, and PCB integration before selecting a production audio subsystem.

RFQ پەیوەندی
WM8772SEDS/V - 24-Bit 6-Channel Audio Codec | Cirrus Logic
WM8772SEDS/V

WM8772SEDS/V - 24-Bit 6-Channel Audio Codec | Cirrus Logic

The Cirrus Logic WM8772SEDS/V is a 24-bit, six-channel audio codec with volume control, supporting audio sampling up to 192 kHz and operating through a 28-pin SSOP package. Its one ADC and three DAC channels support multichannel audio processing where a compact interface between digital audio data and analog signal paths is required. An audio codec combines digital-to-analog and analog-to-digital conversion functions with the control logic needed to exchange audio samples through a digital serial interface. Within the product hierarchy, the WM8772SEDS/V is an audio codec, an interface IC, and a semiconductor designed specifically for consumer audio and audio-visual equipment. Its role is to translate digital audio samples into analog signals and capture analog audio into digital data. The WM8772SEDS/V provides 24-bit resolution for six-channel audio operation, with a maximum sampling rate of 192 kHz. It includes one ADC and three DAC channels, giving designers a mixed-signal conversion resource without requiring separate converters for every direction. Integrated volume control adds another system-level function, allowing signal-level adjustment within the codec rather than through a separate analog amplifier or software-controlled attenuator. The digital control interface is SPI, which supports connection to a host processor or digital audio controller. The manufacturer describes the device as a six-channel stereo codec suitable for DVD, surround-sound, home hi-fi, automotive, and other audio-visual applications. This combination of high sample-rate support, integrated conversion channels, and volume control makes it relevant to multichannel consumer-electronics signal paths. The physical implementation uses a 28-pin SSOP package identified as PDSO28 with dimensions of 10.20 mm by 5.30 mm and a 1.75 mm height. The package is lead-free and conforms to MO-150AH. Its relatively long lead spacing and low profile support conventional surface-mount assembly while providing enough connections for digital control, analog audio channels, clocks, and power rails. Circuit design should treat analog signal routing, digital clock integrity, grounding, and supply decoupling as separate concerns. Keep analog audio traces short and away from high-current switching paths, place input and output capacitors at the appropriate codec pins, and maintain controlled return paths for both analog and digital sections. The manufacturer pin-description table and application circuit should be used when assigning connections and selecting external component values. This page organizes the WM8772SEDS/V specifications, verified sourcing links, package information, application guidance, and verified substitute information into one engineering-focused resource. It also highlights the limits of direct replacement, helping designers distinguish an exact drop-in option from codec variants that may require different firmware, register maps, signal paths, or board-level support.

RFQ پەیوەندی
WM8776SEFT/V - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8776SEFT/V

WM8776SEFT/V - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8776SEFT/V is a 24-bit stereo audio codec with five-channel input multiplexing, supporting operation up to 192 kHz and supplied in a 48-pin TQFP package measuring 7 mm by 7 mm. The device accepts a 2.7 V to 5.5 V analog supply and a 2.7 V to 3.6 V digital supply, making it suitable for mixed-signal audio systems that require compact conversion and input selection. An audio codec is an integrated circuit that converts analog audio signals into digital PCM data and converts digital playback data back into analog audio. A stereo codec handles two audio channels, while an integrated input multiplexer selects among several physical inputs. The WM8776SEFT/V combines those functions in one device, reducing the number of separate signal-routing and conversion components required in a compact audio subsystem. The principal device ratings include 24-bit resolution, a maximum sample rate of 192 kHz, stereo operation, and a five-channel input multiplexer. Its analog supply range of 2.7 V to 5.5 V accommodates conventional analog signal-chain power levels, while its 2.7 V to 3.6 V digital supply range supports digital interfaces operating within the stated range. These features make the codec applicable to consumer audio equipment, multimedia systems, and other products requiring stereo recording or playback. The WM8776 family is identified in technical documentation as the Stereo CODEC with 5 Channel I/P Multiplexer. Its active operating-temperature range is -25°C to 85°C. The 48-TQFP package provides 48 external connection positions and a 7 mm by 7 mm body footprint, allowing placement in a conventional surface-mount PCB design while maintaining access to power, data, clock, and analog-audio connections. Typical uses include digital recording systems, compact stereo playback equipment, multimedia convergence products, and mixed-signal audio control platforms. The five-channel multiplexer is particularly useful when a design must choose among several analog sources without adding multiple analog switch packages. The 192 kHz capability also supports high-rate audio processing where the surrounding converter, clocking, and signal-chain circuitry supports the same operating rate. Design work should begin with the manufacturer pin-description and application information because the exact analog input selection, digital interface, clock requirements, and external component recommendations depend on the complete board architecture. Verify signal levels and supply sequencing before connecting external circuitry, and use the pin-description table rather than package position alone when assigning PCB tracks. This product page organizes the documented codec capabilities, operating ranges, package information, sourcing path, and engineering guidance into a practical engineering reference. It also identifies where an equivalent part must be reviewed for true pin compatibility instead of being selected solely from similar audio-converter specifications.

RFQ پەیوەندی
WM8778SEDS/V - 24-Bit 192kHz Stereo Audio Codec | Cirrus Logic
WM8778SEDS/V

WM8778SEDS/V - 24-Bit 192kHz Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8778SEDS/V is a 24-bit, 192kHz stereo audio codec with a digital serial audio interface, supplied in a 28-pin SSOP package. The WM8778 is designed for surround-sound processing in home hi-fi, DVD-RW, and other audiovisual equipment. Its combination of stereo conversion, 192kHz operation, and a 28-SSOP footprint makes it suitable for equipment requiring a dedicated multichannel-audio signal path. An audio codec is an integrated circuit that converts digital audio data into analog signals and converts analog audio into digital data. The codec belongs to the audio interface IC and audio converter hierarchy, combining an audio analog-to-digital converter, digital-to-analog converter, digital audio interface, and associated control functions. The WM8778's 24-bit resolution supports high-fidelity digital audio processing while its 192kHz maximum sampling rate supports high-rate source material. The headline specifications of the WM8778SEDS/V are 24-bit audio resolution, operation up to 192kHz, and stereo codec operation in a 28-SSOP package. According to the manufacturer datasheet, the device also includes a stereo multibit sigma-delta DAC with digital audio input word lengths from 16 to 32 bits and sampling rates from 32kHz to 192kHz. A multiplexor allows either an external analog input or DAC playback to be selected for the line outputs. The architecture combines digital audio processing with analog line-level signal paths. Its digital interface provides access to the stereo codec functions, while the DAC section supports source-rate playback and analog input selection. This arrangement can reduce the number of separate converters required in an audiovisual system, although system-level performance still depends on the external analog network, clock architecture, grounding, and power-supply implementation described in the datasheet. Typical uses include home theater and hi-fi surround-sound processing, DVD-RW equipment, and other audiovisual products that require simultaneous stereo or surround-sound conversion functions. The device can also support digital recording paths where a 24-bit converter and 192kHz sampling capability are useful. Its 28-SSOP package supports conventional surface-mount assembly, but designers should follow the manufacturer footprint and land-pattern guidance during PCB layout. When designing around the WM8778SEDS/V, begin with the manufacturer's pin-description table, recommended application circuit, and interface timing diagrams. Pay particular attention to analog grounding, the separation of analog and digital return paths, clock routing, and the placement of bypass capacitors. These measures are especially important when the codec operates next to switching regulators, high-speed digital logic, or long digital-audio interconnects. This product page combines the exact WM8778SEDS/V ordering information with a practical explanation of the codec architecture, verified package data, application guidance, and a drop-in alternative assessment. It is intended to help engineers evaluate the device quickly while still using the manufacturer datasheet as the controlling document for pin assignments, electrical limits, timing, and application-circuit details.

RFQ پەیوەندی
WM8804GEDS/V - 1:1 S/PDIF Transceiver | Cirrus Logic
WM8804GEDS/V

WM8804GEDS/V - 1:1 S/PDIF Transceiver | Cirrus Logic

Cirrus Logic WM8804GEDS/V is a high-performance consumer-mode S/PDIF audio transceiver with one received channel and one transmitted channel, supplied in a 20-lead Pb-free SSOP package. It supports a 2.7 V to 3.6 V supply range, an industrial temperature grade of -40°C to +85°C, a 1:1 digital audio interface, and an internal PLL for generating common audio clocks. An S/PDIF transceiver is an interface IC that converts digital audio signals between consumer Sony/Philips digital audio format and a parallel digital audio interface. Within the broader semiconductor hierarchy, the WM8804 is a digital audio interface IC, an interface IC, and a signal-processing semiconductor used to connect audio converters, receivers, and digital playback systems. The WM8804 can use either a crystal-derived clock or an externally supplied high-quality master clock. Its clock-recovery architecture provides low-jitter recovery of the master clock carried by an S/PDIF stream, while the internal PLL can generate commonly used audio clocks. A dedicated CLKOUT pin provides access to a generated or recovered clock for associated audio-processing circuitry. The 1:1 digital interface supports integration between S/PDIF-capable audio hardware and a digital audio bus. A clock derived from the incoming S/PDIF signal can support system synchronization, while the transmit path provides S/PDIF output from a compatible digital audio source. The combination of integrated PLL functions and clock output reduces the amount of external clock-generation circuitry required in consumer audio products. Typical applications include digital home-theater equipment, CD and DVD player subsystems, digital audio receiver boards, active speaker interfaces, consumer home-audio products, and industrial digital audio equipment. The 20-lead SSOP package supports compact circuit layouts, although its larger lead pitch and body dimensions should be considered against smaller surface-mount alternatives when space is constrained. Designers should provide a clean and stable 2.7 V to 3.6 V supply, route the S/PDIF data and clock signals away from noisy switching nodes, and ensure the selected master-clock source has adequate low-jitter performance. Decoupling and exposed-ground layout should follow the manufacturer datasheet recommendations, particularly when the transceiver is adjacent to a switching power supply or a high-speed digital processor. This product summary consolidates the verified distributor specifications, manufacturer-oriented datasheet references, package information, and design considerations into one engineering-focused guide. It also distinguishes documented electrical facts from unavailable pricing, lifecycle, pin-level, and equivalent-part information so engineers can assess fit without relying on unverified substitutions.

RFQ پەیوەندی
WM8805GEDS/RV - 8:1 S/PDIF Audio Transceiver | Cirrus Logic
WM8805GEDS/RV

WM8805GEDS/RV - 8:1 S/PDIF Audio Transceiver | Cirrus Logic

Cirrus Logic WM8805GEDS/RV is a high-performance consumer-mode S/PDIF digital audio interface transceiver with eight receive channels and one transmit channel, packaged in a 28-lead SSOP. It supports sample rates from 32 kHz to 192 kHz and provides a jitter-attenuating phase-locked loop for clock recovery and audio clock generation. A digital audio transceiver is an interface IC that converts between digital audio data streams, clock signals, and electrical serial links. The WM8805 belongs to the S/PDIF transceiver category, where S/PDIF is a consumer-mode digital audio interface used to carry PCM audio between source components, receivers, amplifiers, and recording equipment. Its receive and transmit sections place multiple digital audio channels behind one device. Key features include eight received channels, one transmitted channel, support for 32 kHz through 192 kHz operation, a PLL-based clock architecture, and 50 ps RMS intrinsic period jitter according to the ChipApex technical listing. The device also complies with IEC 60958-3, covering the digital-audio interface requirements relevant to professional and consumer audio equipment. The WM8805 accepts a crystal-derived or externally supplied high-quality main clock, allowing the transceiver to recover S/PDIF clocks with low jitter and generate commonly used audio clocks. This architecture allows a system designer to centralize clock recovery and distribution while reducing the number of separate digital-interface devices. Typical applications include professional audio equipment, multi-channel receivers, digital mixing consoles, set-top boxes, DVD and Blu-ray disc systems, home theater components, and other consumer products with multiple S/PDIF inputs. The eight-channel receiver is especially useful when a product must accept several digital audio sources and route or convert them through one interface IC. When laying out a design, treat the main clock, S/PDIF data, and ground return paths as high-speed digital connections. Follow the pin-description and application-schematic tables in the manufacturer datasheet for decoupling, clock connection, and input termination. Verify the required channel count, supported sample rate, and master-clock source before assigning pins, because the 28-lead SSOP footprint cannot be reused for a device with a different transceiver architecture. This page consolidates channel counts, supported sampling rates, package information, lifecycle status, equivalent-part guidance, and application-oriented design notes into one engineering reference for the WM8805GEDS/RV.

RFQ پەیوەندی
WM8850GEFL/RV 24-Bit 6-Channel HDA Codec | Cirrus Logic
WM8850GEFL/RV

WM8850GEFL/RV 24-Bit 6-Channel HDA Codec | Cirrus Logic

The Cirrus Logic WM8850GEFL/RV is a 24-bit multichannel High Definition Audio codec with HDA and S/PDIF interfaces, four ADC channels, six DAC channels, and support for three stereo DAC outputs in a 48-pin WFQFN package measuring 7 x 7 mm. The device is designed for embedded systems requiring multichannel digital audio and compatibility with the Intel High Definition Audio specification revision 1.0. An audio codec is an interface IC that converts between digital audio data and analog microphone or line-level signals. The WM8850 belongs to the codec hierarchy within audio interface ICs and broader signal-chain semiconductors. Its integrated converters allow an embedded host to transmit digital audio over HDA or S/PDIF while handling analog audio input and output through dedicated converter channels. Key features include 24-bit audio resolution, six DAC channels, four ADC channels, three stereo DACs for 5.1-channel audio, and a 48-QFN surface-mount package. The HDA 1.0-compatible interface supports integration with industry-standard audio controllers, while S/PDIF provides a digital audio connection for compatible equipment. Its 0.50 mm package pitch supports compact consumer and embedded designs. Technically, the codec combines multichannel recording and playback paths in one device. Four ADC channels provide analog-to-digital conversion for microphone or line-input sources, while the six DAC outputs support up to six playback channels. The three stereo DAC architecture enables six-channel 5.1 playback without requiring three separate stereo converter packages, reducing board area and simplifying digital-audio routing. Typical applications include consumer AV receivers, home-theater equipment, set-top boxes, networked media systems, automotive infotainment units, industrial panels, and other embedded multimedia products. The HDA and S/PDIF interfaces make it particularly suitable for systems that already use a digital audio host processor rather than a purely analog audio path. PCB design should preserve the exposed-pad thermal and electrical requirements of the WFQFN package and place analog input, output, and supply connections according to the manufacturer datasheet. Keep sensitive audio traces away from digital clocks and switching nodes, and verify the recommended decoupling network before signal-path layout is finalized. This page consolidates the device identification, package information, converter configuration, interface features, sourcing paths, and practical replacement guidance. It also distinguishes documented drop-in candidates from unrelated codec families so engineers can assess PCB reuse without confusing functional similarity with pin compatibility.

RFQ پەیوەندی
WM8860GEFL/RV - 32-Bit HD Audio Codec | Cirrus Logic
WM8860GEFL/RV

WM8860GEFL/RV - 32-Bit HD Audio Codec | Cirrus Logic

Cirrus Logic WM8860GEFL/RV is a 32-bit, multichannel high-definition audio codec with 2 ADC channels, 2 DAC channels, and 4-channel transmit and receive capability in a 48-QFN 7 x 7 mm package. It is designed for audio systems requiring integrated high-definition playback, capture, digital audio routing, and S/PDIF connectivity. A high-definition audio codec is an interface IC that converts between digital audio data and analog signals. It sits between a digital audio engine, such as an application processor, and external analog audio circuitry. The WM8860 belongs to the broader hierarchy of integrated circuits, interface ICs, audio codecs, and semiconductor devices, combining conversion, digital mixing, and digital-audio interfaces in one component. The device provides two ADC and two DAC channels, a 32-bit audio architecture, and 4-channel high-definition audio transmit and receive functionality. It also includes an S/PDIF transmitter identified by the manufacturer datasheet as compatible with IEC-60958-3. Two dedicated GPIO pins provide control for external amplifiers or additional system components, reducing the need for separate general-purpose control logic in straightforward audio designs. The WM8860 combines multiple signal-processing functions within the codec. Its ADC channels support digital capture of analog audio, while its DAC channels support high-definition analog playback. The S/PDIF interface allows digital audio to leave the codec for external digital audio equipment. Four-channel transmit and receive operation supports contemporary surround-sound and multi-zone architectures without requiring several separate codec packages. Typical uses include home-theater equipment, multichannel audio receivers, powered speakers, automotive infotainment systems, networked-audio equipment, and portable consumer products. In each case, the codec can centralize analog-to-digital capture, digital-to-analog playback, digital routing, amplifier control, and S/PDIF output while preserving a compact 48-QFN footprint. PCB design should preserve the analog and digital separation required by the codec layout and keep sensitive audio routes away from switching nodes and high-current return paths. The exposed-pad thermal structure requires careful ground-plane and via layout for predictable thermal performance. Input and output filtering must be designed for the intended sample rates, source impedance, and external amplifier characteristics rather than copied from a generic reference circuit. This product page consolidates the confirmed 32-bit codec configuration, 2-ADC/2-DAC channel count, 4-channel transmit and receive capability, 48-QFN package information, S/PDIF support, GPIO resources, verified source links, and engineering guidance into one practical selection and integration resource.

RFQ پەیوەندی
WM8860GEFL/V - 32-Bit 4-Channel HDA Audio Codec | Cirrus Logic
WM8860GEFL/V

WM8860GEFL/V - 32-Bit 4-Channel HDA Audio Codec | Cirrus Logic

The Cirrus Logic WM8860GEFL/V is a 32-bit multichannel High Definition Audio codec with two stereo DACs, four output channels, and Intel High Definition Audio specification revision 1.0 compatibility in a 48-pin QFN package measuring 7 mm by 7 mm. It integrates digital audio interfaces, analog audio conversion, and codec control into a single device for multichannel consumer audio equipment. An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and, in some designs, converts analog input into a digital stream. A codec sits within the broader audio interface hierarchy and connects a digital audio bus, analog output circuitry, clocks, control logic, and sometimes microphone inputs. The WM8860GEFL/V is therefore positioned between an HDA controller and the analog speaker or headphone output stage of a finished audio system. The WM8860 family provides two high-performance stereo DACs, enabling four channels of high-definition audio from one package. Its 32-bit audio interface and HDA revision 1.0 compatibility allow it to operate with industry-standard HDA controllers. The 48-QFN package supports compact integration in consumer electronics while providing the mixed-signal connections required for digital audio routing, analog outputs, and codec configuration. The device uses a registered I2C-style control interface and supports vendor-specific control verbs in addition to the standardized HDA verbs implemented by the WM8860. Its system-level role depends on correct clock generation, I2C address configuration, firmware initialization, output-path routing, and analog implementation. These controls allow a host controller to configure playback paths, mixer behavior, and digital volume while the integrated DACs generate the final analog audio channels. Typical applications include desktop computers, home-theater equipment, multichannel active speakers, game consoles, audio docking stations, and consumer media systems with Intel HDA-compatible controllers. It is particularly appropriate where four analog output channels are required without using multiple separate codec packages. System-level audio performance still depends on the external clock source, power supplies, analog output network, grounding, and speaker or headphone amplifiers connected downstream. Design the 7 mm by 7 mm footprint with thermal-via access beneath the exposed pad and keep sensitive analog routing away from digital clocks and switching supply nodes. Validate every external component value against the manufacturer reference schematic and recommended layout. The MPN suffix identifies a specific orderable configuration, so board releases should confirm the full WM8860GEFL/V designation rather than relying only on the WM8860 family name. This page consolidates the verified package, interface, channel-count, and HDA-compatibility details, adds application-specific engineering guidance, and separates confirmed characteristics from parameters that must be confirmed in the manufacturer datasheet before schematic release.

RFQ پەیوەندی
WM8903CLGEFK - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8903CLGEFK

WM8903CLGEFK - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8903CLGEFK is a 24-bit stereo audio codec with 2 ADC channels, 2 DAC channels, and a 40-pin QFN package measuring 5 x 5 mm. Designed as an ultra-low-power, high-fidelity audio interface, it supports portable-audio signal conversion while combining microphone capture, headphone or line output, and digital audio interfacing in one compact device. An audio codec is a mixed-signal semiconductor that converts between digital audio data and analog microphone, line, or headphone signals. Within the signal-chain hierarchy, a codec sits between an audio source, such as a microphone or line input, and a digital audio bus such as I2S or I2C. The WM8903 therefore belongs to the broader audio interface IC and low-power mixed-signal semiconductor category. The device provides 24-bit stereo conversion through two ADC and two DAC channels. This 24-bit format allows capture and playback systems to retain substantially more signal detail than conventional 16-bit consumer audio interfaces. Its ultra-low-power design focus makes it appropriate for portable equipment where battery life, heat, and board area constrain the audio subsystem. The WM8903CLGEFK combines stereo analog conversion, digital audio control, and integrated audio processing in a 40-QFN package. Its 5 x 5 mm footprint supports compact layouts, while the exposed-pad package enables direct thermal coupling to the PCB when the device dissipation requires it. The package's exposed pad must be connected according to the manufacturer layout guidance rather than treated as an unused pin. Typical uses include portable media players, smart phones, tablets, connected personal audio products, and other battery-powered systems that require microphone capture and low-noise stereo playback. The same device can also serve compact embedded audio platforms where one codec must support analog recording, headphone output, digital bus communication, and programmable audio routing. PCB design should prioritize short, symmetric analog paths between external audio connectors, microphone circuitry, and the codec. Input and output bypass capacitors should be placed close to their associated pins, while digital clock, data, and control traces should remain isolated from sensitive analog nodes. Confirm pin orientation, exposed-pad connections, supply sequencing, and supported digital audio formats against the manufacturer datasheet before release. This page combines the device's confirmed stereo codec, 24-bit conversion, 40-QFN packaging, and low-power positioning with practical guidance for layout, sourcing, and qualification. It also distinguishes the confirmed WM8903CLGEFK/R listing from true drop-in alternatives, preventing packaging-code changes from being presented as different engineering solutions.

RFQ پەیوەندی
WM8903CLGEFK/R - 24-Bit Stereo Audio Codec | Cirrus Logic (Tape & Reel)
WM8903CLGEFK/R

WM8903CLGEFK/R - 24-Bit Stereo Audio Codec | Cirrus Logic (Tape & Reel)

Cirrus Logic WM8903CLGEFK/R is a 24-bit stereo audio codec with 2 ADC channels, 2 DAC channels, and a 40-pin QFN package measuring 5 x 5 mm. Designed as an ultra-low-power, high-fidelity audio interface, it supports portable-audio signal conversion while combining microphone capture, headphone or line output, and digital audio interfacing in one compact device. An audio codec is a mixed-signal semiconductor that converts between digital audio data and analog microphone, line, or headphone signals. Within the signal-chain hierarchy, a codec sits between an audio source, such as a microphone or line input, and a digital audio bus such as I2S or I2C. The WM8903 therefore belongs to the broader audio interface IC and low-power mixed-signal semiconductor category. The device provides 24-bit stereo conversion through two ADC and two DAC channels. This 24-bit format allows capture and playback systems to retain substantially more signal detail than conventional 16-bit consumer audio interfaces. Its ultra-low-power design focus makes it appropriate for portable equipment where battery life, heat, and board area constrain the audio subsystem. The WM8903CLGEFK/R combines stereo analog conversion, digital audio control, and integrated audio processing in a 40-QFN package. Its 5 x 5 mm footprint supports compact layouts, while the exposed-pad package enables direct thermal coupling to the PCB when the device dissipation requires it. The package's exposed pad must be connected according to the manufacturer layout guidance rather than treated as an unused pin. Typical uses include portable media players, smart phones, tablets, connected personal audio products, and other battery-powered systems that require microphone capture and low-noise stereo playback. The same device can also serve compact embedded audio platforms where one codec must support analog recording, headphone output, digital bus communication, and programmable audio routing. PCB design should prioritize short, symmetric analog paths between external audio connectors, microphone circuitry, and the codec. Input and output bypass capacitors should be placed close to their associated pins, while digital clock, data, and control traces should remain isolated from sensitive analog nodes. Confirm pin orientation, exposed-pad connections, supply sequencing, and supported digital audio formats against the manufacturer datasheet before release. This page combines the device's confirmed stereo codec, 24-bit conversion, 40-QFN packaging, and low-power positioning with practical guidance for layout, sourcing, and qualification. It also distinguishes the confirmed WM8903CLGEFK/R/R listing from true drop-in alternatives, preventing packaging-code changes from being presented as different engineering solutions.

RFQ پەیوەندی
WM8904CGEFL/V - Stereo Audio Codec 24-Bit | Cirrus Logic
WM8904CGEFL/V

WM8904CGEFL/V - Stereo Audio Codec 24-Bit | Cirrus Logic

The Cirrus Logic WM8904CGEFL/V is an ultra-low-power, high-performance stereo audio codec with a 24-bit signal path, integrated stereo ADC and DAC channels, headphone and line outputs, and a 32-pin QFN package measuring 4 mm by 4 mm. It is designed for portable audio equipment where playback efficiency, compact construction, and elimination of output coupling capacitors are important. The codec also uses a dual-mode charge-pump architecture within its ground-referenced Class-W headphone amplifiers. An audio codec is an integrated semiconductor that converts between digital audio data and analog microphone, line, and headphone signals. In the signal chain, an ADC represents incoming analog audio as digital samples, while a DAC converts digital playback data back into an analog output. The WM8904 combines these functions with integrated headphone and line-output circuitry, reducing the number of external active components required in portable audio systems. The WM8904CGEFL/V supports stereo playback through ground-referenced headphone and line outputs. Because the outputs are ground referenced, their signal is centered around the analog ground reference rather than a divided supply midpoint. The manufacturer states that the outputs eliminate AC coupling capacitors and include common-mode feedback paths that help reject ground noise. These features are particularly useful in portable products where component count, board area, power consumption, and low-frequency noise directly affect user experience. Its Class-W headphone amplifiers incorporate a dual-mode charge-pump architecture to optimize efficiency and power consumption during playback. This architecture supports the device's ultra-low-power design goal while providing integrated headphone drive. The 24-bit codec resolution and two-channel conversion capability make the device suitable for high-quality voice, music, and multimedia playback. Exact conversion rates, signal-to-noise ratios, headphone-output limits, clock frequencies, and supply-voltage limits should be confirmed in the manufacturer datasheet for the selected production configuration. Typical applications include smartphones, portable media players, personal audio devices, portable game consoles, and compact connected audio products. In a smartphone or portable player, the codec can accept digital audio from an application processor, convert it through the DAC, and drive stereo headphones or line outputs while minimizing external passive-component count. The same architecture is suitable for industrial test equipment or voice-enabled systems where low power and a small footprint are important. Layout should prioritize short, quiet analog paths between the codec, microphone or line inputs, and headphone outputs. Place decoupling capacitors close to their associated supply pins and route digital clock and data signals away from sensitive analog inputs. Headphone and line output routing should also account for output impedance, cable loading, and the external components recommended by the manufacturer datasheet. The exposed-pad thermal and layout requirements in the package drawing should be followed to maintain reliable operation across the intended temperature range. This product page combines package, codec, interface, and amplifier details with drop-in replacement information, application guidance, comparison parameters, and PCB-focused design notes. It is structured to help engineers identify whether the WM8904CGEFL/V matches the required channel count, package footprint, power level, and portable-audio architecture before beginning board layout or production sourcing.

RFQ پەیوەندی
WM8940CGEFL/V Mono Codec with Speaker Driver | Cirrus Logic
WM8940CGEFL/V

WM8940CGEFL/V Mono Codec with Speaker Driver | Cirrus Logic

The Cirrus Logic WM8940CGEFL/V is a low-power mono audio codec with integrated microphone, headphone, speaker, and mono line-output support, operating from a 2.5 V to 3.6 V analog supply and a 1.71 V to 3.6 V digital supply. The device accepts 24-bit serial audio data, supports sample rates from 8 kS/s to 48 kS/s, and is packaged in a 24-QFN surface-mount package. An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and converts analog microphone or line inputs back into digital data. Its hierarchy extends from codec and audio interface to analog and mixed-signal IC, then to interface IC and semiconductor. The WM8940 combines these conversion functions with integrated output drivers, reducing the number of external microphone, headphone, and speaker amplifier components required in portable audio equipment. The WM8940 supports differential or single-ended microphone input and includes speaker, headphone, and mono line-output drivers. Its advanced delta-sigma converters, digital decimation filters, and digital interpolation filters support audio processing from 8 kS/s through 48 kS/s. The manufacturer also identifies a selectable high-pass filter and four programmable notch filters, allowing the device to address microphone low-frequency rejection, wind noise, and other in-band acoustic problems. The 24-bit digital audio interface connects the codec to a host processor, while separate analog and digital supply domains support mixed-signal systems operating at different voltage levels. The analog supply range of 2.5 V to 3.6 V and digital supply range of 1.71 V to 3.6 V provide flexibility for portable consumer equipment. Integrated drivers reduce external amplification requirements, but output loading, thermal dissipation, and DC bias remain important layout considerations. Typical applications include digital still cameras, camcorders, portable media players, voice recorders, personal audio devices, and other battery-powered products requiring one-channel capture and playback. Its low-power mono architecture is particularly appropriate where a stereo codec would add cost, board area, and energy use without improving the intended recording or playback experience. The integrated headphone and speaker paths simplify portable-system design while retaining flexible input selection and digital audio processing. PCB design should keep analog microphone and output routes away from digital clock and serial-data traces, provide a continuous ground reference beneath the exposed pad, and decouple the analog and digital supply pins locally. Component values, filter settings, clock requirements, and output configuration must be selected using the manufacturer’s recommended application circuit and pin descriptions. The exposed thermal pad should be connected to the ground plane according to the package land pattern. This page combines the manufacturer’s device capabilities, lifecycle status, package information, and verified cross-reference results with practical application guidance. It also distinguishes the exact WM8940CGEFL/V order code from related packaging variants and separates confirmed drop-in replacements from functional alternatives that still require package and pin-level review.

RFQ پەیوەندی
WM8941GEFL/RV - 24-Bit Mono Audio Codec | Cirrus Logic
WM8941GEFL/RV

WM8941GEFL/RV - 24-Bit Mono Audio Codec | Cirrus Logic

Cirrus Logic WM8941GEFL/RV is a 24-bit mono audio codec with audio and video buffer-interface functions, packaged in a 28-QFN surface-mount package measuring 4 mm by 4 mm. The component is identified by distributor catalogs as an interface IC in the CODEC category and is associated with the Cirrus Logic WM8941 product family. Its compact package supports space-constrained audio equipment in which analog audio processing, digital audio conversion, and compact routing must coexist within a limited board area. An audio codec is an interface integrated circuit that converts digital audio data to and from analog signals while supporting the clocks, control logic, and signal paths required by audio equipment. In the broader electronics hierarchy, an audio codec belongs to interface ICs, then to integrated circuits and semiconductors. A mono codec is particularly useful when the system processes one primary analog channel while still requiring digital audio conversion, speaker or headphone support, or an embedded video-related audio path. The WM8941GEFL/RV is identified as a 24-bit device. Resolution alone does not determine the complete signal-chain performance: clock frequency, sample rate, analog front-end design, input and output impedance, dynamic range, distortion, and the selected operating mode also determine the achievable audio quality. Designers should therefore use the manufacturer datasheet and its recommended application circuit to select the appropriate filter, clock, decoupling, and output-stage components for the target audio bandwidth. The 28-QFN package creates a compact implementation but places a high share of connections beneath the device body. This supports dense PCB layouts while making careful escape routing important. Input, output, supply, ground, clock, control, and exposed-pad connections must follow the manufacturer’s land pattern and layout guidance. Thermal performance also depends on the exposed pad, copper area, internal planes, and the thermal burden generated by the selected operating mode. Typical design contexts include portable or embedded audio systems, multimedia devices, communication terminals, recording equipment, and other products requiring a compact mono audio conversion interface. In each case, the codec may sit between an audio source and a digital audio host, or between a digital audio engine and an analog transducer stage. Clock topology, grounding, signal routing, and startup behavior must be evaluated as a complete subsystem rather than as isolated component concerns. The primary engineering consideration is integration without compromising signal integrity. Keep analog and digital return currents separated where practical, place required bypass capacitors close to their supply pins, route clocks away from sensitive audio inputs, and use the exposed-pad copper area for both electrical return and thermal spreading. The manufacturer’s reference configuration should also be followed for filtering, resistor values, and gain-dependent components. This page consolidates the verified catalog identity, package information, sourcing guidance, compatibility limits, and practical implementation considerations for the WM8941GEFL/RV. It also distinguishes the observed device configuration from unverified electrical details, helping engineers evaluate the part without treating incomplete catalog data as a complete datasheet specification.

RFQ پەیوەندی
WM8941GEFL/V Mono CODEC with Speaker Driver | Cirrus Logic
WM8941GEFL/V

WM8941GEFL/V Mono CODEC with Speaker Driver | Cirrus Logic

The Cirrus Logic WM8941GEFL/V is a low-power, 24-bit mono audio CODEC with an integrated speaker driver, video buffer, microphone input, headphone output, and mono line output in a 28-QFN (4 mm x 4 mm) package. Designed for portable imaging and multimedia equipment, it combines several analog audio functions with a digital audio interface to reduce the number of external amplifiers and supporting components required in portable products. An audio codec is a mixed-signal interface IC that converts digital audio samples into analog signals and converts analog microphone or line-level audio into a digital format. A mono CODEC performs those functions for one audio channel, while an integrated speaker or headphone driver can directly load an output transducer. The WM8941GEFL/V places this signal chain in one compact surface-mount package suitable for portable digital still cameras, camcorders, and similar equipment. The device supports differential or single-ended microphone inputs, eliminating the need for a separate microphone amplifier in many portable designs. It also integrates drivers for speakers or headphones and provides a mono line output. These resources allow a compact system to implement microphone capture and audio playback while reducing board area and external component count. A separate integrated current-mode video buffer supports video output needs and includes short-circuit protection. The WM8941 family uses sigma-delta conversion for digital audio processing, as described in the manufacturer documentation for the closely related WM8941GEFL/RV version. The WM8941GEFL/V is identified in distribution records as a 24-bit mono CODEC in a 28-QFN (4 mm x 4 mm) package. Its design emphasizes portable-system integration rather than a separate collection of discrete analog audio blocks. Typical applications include portable digital cameras, camcorders, compact recording systems, and portable consumer devices requiring microphone recording and mono audio playback. It is particularly relevant where board area is constrained and the design needs integrated microphone, headphone, speaker, line-output, and video-buffer functions. Portable multimedia equipment benefits from the reduced component count and simplified analog routing created by combining these blocks. When laying out a design, follow the pin-description and application-circuit tables in the manufacturer datasheet for supply decoupling, analog and digital return paths, microphone biasing, output filtering, and exposed-pad connection. Keep analog signal paths short, separate sensitive microphone routing from digital and video paths, and connect the exposed thermal pad according to the package land pattern. The exact pin names and PCB footprint details must be taken from the official WM8941 datasheet rather than inferred from similar codec packages. This page consolidates the exact catalog identity, package information, functional description, sourcing routes, compatible-family context, and application guidance for the WM8941GEFL/V. It also identifies where engineering decisions require the manufacturer pin table, electrical limits, or application circuit, helping engineers move directly from component selection to a defensible portable-audio implementation.

RFQ پەیوەندی
WM8958ECS/R - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8958ECS/R

WM8958ECS/R - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8958ECS/R is a 24-bit stereo audio codec with 2 ADC channels, 4 DAC channels, I2S and PCM digital audio interfaces, and integrated stereo Class D/AB speaker plus Class W headphone drivers, housed in a 72-pin W-CSP package measuring 4.5 mm by 4.3 mm. An audio codec is a mixed-signal semiconductor that converts between digital audio data and analog microphone, speaker, and headphone signals. It belongs to the codec and audio-interface hierarchy, combines an audio codec, integrated analog-to-digital converters and digital-to-analog converters, and ultimately falls under mixed-signal and signal-processing semiconductors. This integration reduces external components and board area in portable multimedia systems. The WM8958 is designed for smartphones and other portable multimedia devices. Key features include ultra-low-power operation, 24-bit audio conversion, stereo full-duplex asynchronous sample-rate conversion, multiple digital audio channels, integrated Class D/AB speaker amplification, and integrated Class W headphone amplification. It requires two external voltage supplies, while other internal supply rails are generated by integrated low-dropout regulators. Its architecture places an audio hub, converters, digital interfaces, and output-driver functions in one device. The digital side supports I2S and PCM formats, while the analog conversion section supports two ADC inputs and four DAC outputs. The integrated speaker and headphone drivers reduce the need for separate output amplifiers, although external passive filtering, routing, and decoupling networks may still be required by the final circuit design. Typical uses include smartphone and tablet audio hubs, portable media-player headsets, Bluetooth and wireless audio accessories, compact consumer-audio systems, and portable multimedia products. The device is especially relevant where low power, compactness, high-fidelity conversion, integrated headphone drive, and integrated stereo speaker drive are important design priorities. Designers must verify the exact pin assignments, supported audio rates, clocking scheme, speaker-load limits, analog biasing, and decoupling requirements against the manufacturer datasheet before layout. The 4.5 mm by 4.3 mm W-CSP also demands careful escape routing, acoustic inspection, and assembly-process control; trace geometry, component placement, and thermal or power-distribution planning can materially affect audio performance. This product record combines verified manufacturer and distributor information with package-level comparison, application guidance, and engineering-oriented design notes. It also distinguishes documented integrated features from unverified details, avoiding unsupported claims while helping engineers evaluate the WM8958ECS/R for portable audio designs.

RFQ پەیوەندی
WM8960CGEFL/RV Stereo Codec with 1W Drivers | Cirrus Logic
WM8960CGEFL/RV

WM8960CGEFL/RV Stereo Codec with 1W Drivers | Cirrus Logic

The Cirrus Logic WM8960CGEFL/RV is a stereo audio codec with integrated Class-D speaker drivers, headphone drivers, and a microphone interface, designed for portable digital audio applications. The device is identified as a 24-bit stereo audio interface in a 32-QFN package measuring 5 x 5 mm, and the verified manufacturer-related data states that it provides 1 W per channel into 8-ohm loads with a 5 V supply. Its combination of digital audio conversion, analog input, headphone output, and integrated speaker amplification allows portable equipment to use one compact audio subsystem instead of separate codec and amplifier packages. A stereo audio codec is an interface IC that converts digital audio data into analog signals and converts analog microphone or line-level inputs back into digital audio data. The WM8960CGEFL/RV belongs to the broader audio interface and power-management hierarchy: audio codec, mixed-signal interface IC, semiconductor, and portable-audio signal-chain component. Its integrated Class-D speaker drivers target compact speaker solutions where PCB area, component count, and low power are important. The headphone drivers support personal-audio outputs, while the microphone interface supports portable voice and communication functions. Verified source data identifies the part as a stereo CODEC with 1 W stereo Class-D speaker drivers and headphone drivers for portable audio applications. The supplied DigiKey result identifies it as a 24-bit stereo audio interface in a 32-QFN 5 x 5 mm package. The WM8960CGEFL/RV is therefore suited to portable audio systems where the digital host interface, analog audio paths, and speaker amplification must coexist in one package. The exact sample rate, voltage range, control interface, and full pin-level electrical limits are not included in the supplied verified data and must be confirmed from the manufacturer datasheet before design release. A key design consideration is analog and power-supply layout. Digital audio clocks and control signals should be kept away from sensitive microphone and headphone paths, while the integrated speaker outputs require careful return-current routing and adequate power delivery. Decoupling must follow the manufacturer’s recommended values and placement because the codec combines digital, analog, headphone, and Class-D output functions in one package. Designers should also verify speaker impedance, load current, thermal conditions, and supply sequencing against the official datasheet before connecting external transducers. Typical uses include portable media players, compact audio accessories, personal-audio products, voice-enabled devices, and small speaker systems. This page consolidates the verified distributor descriptions, package information, identified audio functions, source links, and engineering guidance; it does not substitute unavailable electrical details with assumptions.

RFQ پەیوەندی