بەرهەمەکان (720+)

ATF16V8BQL-15JU - 15 ns Flash PLD | Microchip Logic
ATF16V8BQL-15JU

ATF16V8BQL-15JU - 15 ns Flash PLD | Microchip Logic

The Microchip Technology ATF16V8BQL-15JU is a 5 V CMOS electrically erasable programmable logic device with 8 macrocells, up to 16 inputs, 8 I/O outputs, and a 15 ns speed grade in a 20-lead PLCC (9 x 9 mm) package. It combines a reusable Flash-programmable architecture with edge-sensing low-power operation for compact legacy control, interface, and glue-logic designs. An electrically erasable PLD is a semiconductor that stores configurable logic functions in nonvolatile memory. It occupies the GAL16V8 and 16R8 design niche while simplifying programming because the configuration can be erased and rewritten instead of relying on one-time-programmable fuse links. In the broader hierarchy, the ATF16V8BQL is a simple PLD, which is a programmable logic device, an FPGA-family implementation using macrocell-based logic rather than a sea of configurable lookup logic. The device provides 250 logic gates, 8 macrocells, and up to 16 inputs with 8 configurable I/O pins. Its 5 V nominal supply is specified over 5 V ±10% for the industrial speed ranges. A typical low-power standby current of 5 mA and automatic entry into a low-power mode through Input Transition Detection help reduce activity when external logic is idle. The Flash configuration supports repeated in-system or programming-cycle updates. The ATF16V8BQL architecture supports the common registered, combinatorial, and complex macrocell arrangements used by GAL16V8-class logic. This makes it useful for address decoding, bus qualification, state-machine decoding, latch and flip-flop implementation, and interface control. The -15 speed designation corresponds to a 15 ns device, while the listed maximum pin-to-pin delay for this exact ordering code is 10 ns under the applicable test conditions. Typical applications include industrial control boards, test and measurement fixtures, peripheral adapters, legacy bus interfaces, printer and scanner controllers, and compact embedded systems that need deterministic combinational or registered logic without adding a microcontroller. The device is particularly useful where a small logic footprint, nonvolatile configuration, and 20-pin PLCC availability matter more than the flexibility of an FPGA. PCB design should preserve the PLCC footprint, route all supply pins to a stable 5 V rail, and connect programming or test access according to the manufacturer datasheet. Designers replacing a fuse-based GAL16V8 should verify the JEDEC fuse map, macrocell mode, pin assignments, and timing budget before treating a device as a drop-in replacement. This page combines the device architecture, ordering-code details, practical application guidance, verified same-brand drop-in candidates, and design checks that help engineers determine whether the ATF16V8BQL-15JU can replace a legacy GAL16V8-class implementation.

RFQ پەیوەندی
ATF16V8BQL-15PC - 15ns Low-Power EEPLD | Microchip
ATF16V8BQL-15PC

ATF16V8BQL-15PC - 15ns Low-Power EEPLD | Microchip

The Microchip Technology ATF16V8BQL-15PC is a 15 ns electrically erasable programmable logic device in a 20-pin PDIP package. It provides 250 logic gates, eight macrocells, up to 16 inputs, and eight configurable I/O outputs. Operating from a single 5 V supply, the device combines CMOS implementation with automatic low-power operation and 5 mA typical standby current. An electrically erasable programmable logic device, or EEPLD, is a user-programmable semiconductor that implements fixed logic functions through stored configuration data. The ATF16V8BQL belongs to the simple PLD hierarchy within programmable logic, offering a compact alternative to discrete gates, counter logic, and older bipolar PAL devices. Its electrically erasable Flash configuration allows the implemented logic to be reprogrammed without removing the IC from the circuit. The ATF16V8BQL architecture supports up to 16 inputs, eight I/O pins, and eight product terms per output. Three operating modes are selected automatically by the programming software, allowing registered, combinatorial, and mixed combinational/registered logic in one device. Input Transition Detection circuitry monitors pin activity and automatically enters the low-power state when the device is idle, reducing consumption without requiring an external control signal. With a specified 15 ns speed grade, the ATF16V8BQL-15PC is suitable for control, decoding, address translation, interface adaptation, and small state-machine implementations. Its 20-pin PDIP format also supports prototyping and through-hole assembly where surface-mount packages are undesirable. The electrically erasable configuration architecture provides faster board rework than fuse-programmed PAL devices while retaining a deterministic logic implementation after programming. Typical uses include industrial control panels, programmable interface logic, counter and decoder circuits, data-routing networks, and compact embedded control systems. Engineers can implement the same board with different logic configurations by reprogramming the device, making it useful for product revisions, configurable control logic, and legacy equipment modernization. The low-power standby mode also benefits systems where most logic remains idle between external events. During PCB design, preserve the ATF16V8BQL-15PC pin assignments and provide clean 5 V routing with adequate bypass capacitance. Because configuration determines the logical function of each I/O pin, validate the programmed equations and pin constraints against the manufacturer’s device pin-description table before releasing the layout or updating production firmware. This product page combines the manufacturer’s device specifications, programming-oriented application guidance, verified package information, and same-footprint replacement analysis. It also highlights the distinction between the ATF16V8B and ATF16V8BQL low-power families so engineers can select the appropriate speed, package, and power characteristics for a design.

RFQ پەیوەندی
ATF16V8BQL-15PU - 250-Gate Low-Power PLD | Microchip
ATF16V8BQL-15PU

ATF16V8BQL-15PU - 250-Gate Low-Power PLD | Microchip

The Microchip Technology ATF16V8BQL-15PU is a 250-gate, electrically erasable programmable logic device with a 5 V supply, support for as many as 16 inputs, and 8 configurable I/Os in a 20-pin PDIP package. Its 15 ns speed grade provides deterministic combinational logic for control, decoding, interface, and legacy system-support functions. An erasable programmable logic device, or PLD, is a semiconductor whose logic configuration is stored in nonvolatile memory. A CPLD belongs to the programmable-logic hierarchy, which includes PLDs, complex programmable logic devices, FPGA and CPLD families, and broader digital-logic semiconductors. Unlike a mask-programmed device, an ATF16V8BQL retains its programmed configuration after power is removed and can be reprogrammed during development or field updates. The ATF16V8BQL architecture provides eight macrocells, each with eight product terms and configurable output operation. It supports up to 16 inputs, 8 I/Os, and three configurable operating modes. Input Transition Detection circuitry automatically places the device into a low-power state when inputs are idle, while typical standby current is listed as 5 mA. The electrical-erasable Flash-memory implementation combines nonvolatile configuration storage with a 15 ns propagation-delay grade. The architecture is a superset of generic 16R8 arrangements and can directly replace many 20-pin combinatorial PLDs. This makes it useful for consolidating small amounts of glue logic without introducing the routing flexibility and complexity of an FPGA. Typical uses include address decoding, bus-interface glue logic, industrial control, power-sequencing logic, peripheral interfacing, and legacy equipment upgrades. The low-power behavior is especially useful in systems that spend substantial time waiting for inputs, while the 5 V supply and 15 ns timing support conventional 5 V digital designs. PCB design should preserve the 20-pin PDIP footprint, route all supply pins consistently, and keep programming and control traces away from sensitive analog sections. Confirm the device's programmed state and timing assumptions before substitution because device identifiers, speed grades, package suffixes, and architectural differences can change compatibility between otherwise similar PLDs. This page combines the manufacturer's architecture and power characteristics with pin-compatible alternatives, application guidance, parameter comparisons, and practical design considerations for engineers planning a programmed-logic design or an in-circuit replacement.

RFQ پەیوەندی
ATF16V8BQL-15SC - 15ns 8-Macrocell EE PLD | Microchip
ATF16V8BQL-15SC

ATF16V8BQL-15SC - 15ns 8-Macrocell EE PLD | Microchip

The Microchip ATF16V8BQL-15SC is a 5 V, 15 ns, electrically erasable programmable logic device with 8 macrocells, up to 16 inputs, and 8 I/Os in a 20-SOIC package. It provides a compact implementation of registered, combinatorial, and complex-programmable logic functions for industrial control, interface consolidation, and legacy PAL-compatible designs. A programmable logic device, or PLD, is a semiconductor whose internal logic connections are user-programmable. Within the hierarchy of programmable semiconductor devices, the ATF16V8BQL belongs to the PAL-compatible complex-programmable logic device family. Its electrically erasable Flash-based configuration supports in-circuit reprogramming while retaining the familiar 20-pin architecture of many conventional PAL devices. The ATF16V8BQL-15SC provides eight outputs, with eight product terms allocated to each output. Up to 16 inputs and 8 I/Os allow designers to consolidate multiple gates, decode signals, qualify control paths, and implement state-machine functions. The device operates from a 5 V supply, has a 15 ns propagation-delay grade, and uses an edge-sensing low-power architecture with a typical standby current of 5 mA. Input Transition Detection provides an important architectural feature: the ATF16V8B powers down automatically into a low-power mode when inputs remain idle. This behavior makes the device suitable for control systems that spend substantial time waiting for external events. Three configurable operating modes allow software to select the appropriate registered, combinatorial, or complex-programmable architecture for the implemented logic. Typical uses include industrial sequencing and interlocks, data acquisition and test equipment, legacy interface replacement, address decoding, and compact control logic around microprocessors. The 20-SOIC format also supports conventional surface-mount assembly, while its Flash-based electrically erasable configuration simplifies firmware updates after programming. When designing the PCB, preserve the 20-SOIC footprint exactly and assign every signal according to the pin-description table in the manufacturer datasheet. Confirm output timing, input rise and fall behavior, supply-voltage tolerance, and unused-pin requirements in the system timing and schematic review rather than inferring them from generic PAL conventions. This product summary combines the manufacturer device information, programming architecture, practical placement guidance, and same-package replacement analysis. It is intended to help engineers evaluate ATF16V8BQL-15SC for new compact-logic designs and for planned replacements of compatible 20-SOIC programmable logic devices.

RFQ پەیوەندی
ATF16V8BQL-15SU - 15ns 5V 8-Macrocell PLD | Microchip
ATF16V8BQL-15SU

ATF16V8BQL-15SU - 15ns 5V 8-Macrocell PLD | Microchip

Microchip ATF16V8BQL-15SU is a 15 ns, 5 V, 8-macrocell electrically erasable programmable logic device with up to 16 inputs and 8 I/Os, packaged in a 20-pin SOIC. It uses CMOS electrically erasable Flash technology and provides 250 gates of combinational or registered logic in a single package. A simple programmable logic device, or SPLD, is a user-programmable semiconductor that consolidates gates, registers, and interconnect functions into one compact device. The ATF16V8BQL belongs to the broader hierarchy of programmable logic device, PLD, digital logic IC, and semiconductor. Its eight macrocells can implement practical control, decoding, interface, and state-machine functions without requiring a complex FPGA or microprocessor. The device operates from a 5 V supply, has a 15 ns speed grade, and offers eight user I/Os alongside up to 16 inputs. Edge-sensing operation and Input Transition Detection support low-power behavior, while automatic low-power mode reduces standby consumption when inputs are idle. The low-power BQL implementation is specifically positioned for designs where both operating performance and reduced standby current are important. Eight outputs are allocated eight product terms in the generic 16V8 architecture, allowing each macrocell to support registered or combinational logic and configurable feedback. The ATF16V8B architecture is described as a superset of generic 16R8 devices and many 20-pin combinatorial PLDs, making it useful for legacy logic consolidation and compact control designs. A 15 ns grade provides a defined timing target for clocked and combinational implementations. Typical uses include industrial interface control, status decoding, counter and timer logic, peripheral data selection, simple state machines, and glue logic between slower system blocks. The 20-pin SOIC package is also suitable for prototypes, repair assemblies, and industrial control boards where through-hole PLDs would consume excessive board area. Programming requires a compatible programmer and the device's JEDEC programming file or fuse data. Designers should account for 5 V input thresholds when interfacing with modern 3.3 V logic. Follow the manufacturer's datasheet for pin assignments, power decoupling, programming-test vectors, AC timing, and absolute maximum ratings. Confirm that the programmed macrocell architecture, feedback assignments, and output enable controls match the intended Boolean equations before production. This product page combines the manufacturer's device identity and datasheet information with package-focused guidance, practical application guidance, and qualified drop-in replacement analysis. It is intended to accelerate component identification, PCB compatibility checks, and design reviews for engineers maintaining or redesigning 20-pin SPLD-based equipment.

RFQ پەیوەندی
ATF16V8BQL-15XI - 15ns Low-Power Flash PLD | Microchip
ATF16V8BQL-15XI

ATF16V8BQL-15XI - 15ns Low-Power Flash PLD | Microchip

The Microchip ATF16V8BQL-15XI is a 15 ns electrically erasable programmable logic device with 8 macrocells, up to 16 inputs, and 8 configurable I/Os in a 20-pin TSSOP package. It operates from a 5 V supply, offers 250 gates of logic capacity, and combines edge-sensing operation with automatic low-power standby through Input Transition Detection. A programmable logic device, or PLD, is a semiconductor whose internal logic connections can be configured to perform fixed Boolean functions. The ATF16V8BQL family belongs to the broader hierarchy of programmable logic devices, FPGAs, digital logic ICs, and semiconductors. Unlike a fixed gate-array implementation, it consolidates multiple sum-of-products logic functions into one reprogrammable device, allowing board-level designs to be revised without changing the PCB layout. The principal features of the ATF16V8BQL-15XI include a 15 ns propagation-delay grade, 8 macrocells, as many as 16 inputs, 8 I/O pins, and a 5 V supply. Its electrically erasable Flash-based configuration supports in-circuit reprogramming and design updates. The Input Transition Detection circuit powers the device down automatically when inputs remain idle, while a typical standby current of 5 mA helps reduce consumption in designs that spend substantial time waiting for a new logic event. Technically, the device implements several independent programmable logic blocks within one compact package. Each macrocell can combine product terms and route registered or combinational functions through the device I/O structure. The 15 ns speed grade is suitable for control, decoding, address translation, interface adaptation, and general-purpose glue-logic tasks that do not require the capacity or routing flexibility of an FPGA. Edge-sensing behavior helps ensure that the internal logic responds predictably when an asynchronous input changes state. Typical uses include industrial control and data-acquisition systems, peripheral-interface conditioning, bus arbitration, encoder decoding, alarm and interlocks, and compact control panels. The 20-pin TSSOP package is also practical for legacy and space-conscious boards where a programmable device provides more flexibility than a collection of individual logic gates. Designers should account for 5 V supply requirements, output drive, signal transitions, programming-tool compatibility, and unused pins before layout. Place the device close to the signals it handles, provide stable supply decoupling, and route high-speed or noisy nets away from programming and low-power control paths. Confirm the fuse configuration and pin assignment with the manufacturer programming environment before releasing the PCB. This product page combines the device architecture, package details, verified substitutions, application guidance, and selection trade-offs into a compact engineering reference. It is intended to support faster sourcing decisions while keeping the critical distinction between electrically similar devices and true pin-compatible drop-in replacements clear.

RFQ پەیوەندی
ATF16V8BQL-15XU - 15ns Flash PLD | Microchip Technology
ATF16V8BQL-15XU

ATF16V8BQL-15XU - 15ns Flash PLD | Microchip Technology

The Microchip Technology ATF16V8BQL-15XU is a 15 ns electrically erasable programmable logic device with 8 macrocells, up to 16 inputs, 8 configurable I/Os, and a 5 V supply in a 20-TSSOP package. It combines deterministic combinational and registered logic with Flash-based reprogrammability, internal input pull-ups, and automatic low-power operation for compact control, interface, and glue-logic designs. A simple programmable logic device, or SPLD, is a programmable-logic IC within the broader CPLD and FPGA hierarchy. It provides a fixed, electrically programmable logic structure that engineers can configure for Boolean equations, product-term logic, registered outputs, and state-machine functions. The ATF16V8BQL architecture is especially useful when a design needs more control than a fixed gate array but less complexity, cost, or routing overhead than an FPGA. Key features include a 15 ns propagation delay grade, 8 macrocells, 250 gates, and three automatically selected operating modes. The Flash configuration memory allows the device to be reprogrammed without removable programming adapters. Input Transition Detection circuitry recognizes activity on inputs and automatically places an idle device into a low-power state, with typical standby current of 5 mA. Internal pull-up resistors are provided on inputs and I/Os, reducing the need for external bias components in many designs. The ATF16V8BQL incorporates a superset of the generic 16R8 architecture, allowing direct replacement of 16R8 devices and compatibility with many 20-pin combinatorial PLDs. Each of the 8 macrocells has eight product terms, and the configuration architecture supports combinational, complex macrocell, and registered modes. JEDEC file preload and a 64-bit user signature area support controlled manufacturing workflows and device identification. Typical applications include industrial control and data-acquisition interfaces, address decoding, peripheral glue logic, legacy protocol conversion, and small state machines. The 20-TSSOP package is useful where a 5 V supply is available and board area is more constrained than with a leaded DIP package. Its nonvolatile Flash configuration also suits designs that require field updates or production programming after board assembly. Designers should verify the exact operating mode, output polarity, feedback assignment, and pin behavior against the manufacturer datasheet before replacing an existing GAL16V8-class circuit. PCB layouts must preserve the pin orientation and leave adequate routing clearance around the TSSOP body. Power and ground connections should be short and decoupled to prevent configuration or output-edge irregularities. This product page combines the manufacturer device information, package and timing details, sourcing information, replacement guidance, and practical design guidance to support component selection and PCB implementation. The comparison data also distinguishes same-package drop-in options from alternatives that require a package change.

RFQ پەیوەندی
ATF16V8BQL-25PC - 25ns Low-Power 8-Macrocell EE PLD | Microchip
ATF16V8BQL-25PC

ATF16V8BQL-25PC - 25ns Low-Power 8-Macrocell EE PLD | Microchip

The Microchip Technology ATF16V8BQL-25PC is a low-power, electrically erasable programmable logic device with 8 macrocells, up to 16 inputs, 8 configurable I/O outputs, and a 25 ns propagation delay. It operates from a 5 V supply and is packaged in a 20-pin PDIP for through-hole PCB designs. An electrically erasable PLD is a user-programmable logic semiconductor that stores its configuration in nonvolatile EEPROM rather than in external switches or mask-programmed logic. The ATF16V8B family provides a superset of the generic 16R8 architecture and can directly replace many 20-pin combinatorial PLDs. Each of its eight outputs is allocated eight product terms, allowing moderately complex sum-of-products logic to be implemented in one package. The ATF16V8BQL emphasizes low standby power through Input Transition Detection. According to the manufacturer datasheet, its typical standby current is 5 mA, and the device automatically enters its low-power mode when inputs are idle. A 25 ns speed grade supports moderate clock and control-logic requirements, while electrically erasable configuration permits reprogramming without replacing the device. The device offers three operating modes configured automatically by software: registered, complex combinatorial, and simple combinatorial. These modes support output-register feedback, exclusive-OR structures, and conventional combinational equations. The architecture emulates the industry-standard 20-pin PAL arrangement and provides eight outputs with up to eight product terms per output. Typical uses include industrial control decoding, legacy peripheral interface logic, address or command translation, and small glue-logic blocks in test, communications, and embedded equipment. ATF16V8BQL-25PC is especially useful when low quiescent consumption is more important than the shortest available propagation delay and a through-hole package is acceptable. Designers should assign each PLD pin according to the manufacturer pin-description table, provide a stable 5 V supply, and include the required decoupling capacitor close to the supply pins. Legacy PLD designs should also be checked for signal polarity, output enable behavior, unused-pin treatment, and timing margins before production release. This product record combines the manufacturer's electrical and architectural details with package-specific sourcing guidance, programming considerations, practical design notes, and a careful assessment of drop-in replacement options for the ATF16V8BQL-25PC.

RFQ پەیوەندی
ATF16V8C-5JX - 5ns EECMOS PLD, 8 Macrocells | Microchip
ATF16V8C-5JX

ATF16V8C-5JX - 5ns EECMOS PLD, 8 Macrocells | Microchip

The Microchip ATF16V8C-5JX is a 5 ns EECMOS programmable logic device with 8 macrocells, a 250-gate architecture, and a 20-pin PLCC package. It operates from a 5 V supply and includes an optional pin-controlled power-down function capable of reducing total supply current below 100 uA. The device supports eight outputs, each allocated eight product terms, and provides three software-configurable operating modes for implementing complex combinational logic. An EECMOS PLD is a member of the programmable logic device hierarchy, combining a configurable logic architecture with nonvolatile electrically erasable flash memory. Unlike a fixed-function logic gate array, the ATF16V8C allows the interconnections and registered output behavior to be programmed after manufacture. This family is based on the Atmel-proven EECMOS architecture and is positioned between simple fixed AND-OR logic and larger field-programmable gate arrays. The ATF16V8C incorporates a superset of generic 16R8 architecture, allowing direct replacement for the 16R8 family and most 20-pin combinatorial PLDs. Its 5 ns speed grade supports demanding control logic, while the available 166 MHz maximum operating frequency provides a useful figure for high-speed system timing. An optional power-down input can be assigned to device pin 4; when enabled and asserted, output data and internal logic states are latched and held. The ATF16V8C is specified for operation from 5 V, with industrial and commercial supply tolerances identified in the manufacturer documentation. The available product information identifies a commercial operating range from 0 C to 70 C and a standard-power 5 ns configuration. Its 20-pin PLCC package is suitable for legacy and industrial control systems where ceramic leaded-chip-carrier footprints and programmable logic are established requirements. Typical uses include industrial controller address decoding, state-machine implementation, peripheral interfacing, signal qualification, and compact combinational control networks. The eight-output structure makes the device useful when a design needs several related Boolean functions without occupying a larger FPGA or microcontroller. Designers should verify the programmed architecture, pin 4 power-down assignment, supply tolerance, and timing against the manufacturer datasheet before replacing a PAL or GAL device. PCB layouts must accommodate the PLCC-20 footprint, programming access, and the target system’s power sequencing. This page also consolidates verified pricing, source links, application guidance, and the constrained set of directly comparable drop-in devices.

RFQ پەیوەندی
ATF16V8C-5XC - 5ns 16V8 Flash PLD | Microchip
ATF16V8C-5XC

ATF16V8C-5XC - 5ns 16V8 Flash PLD | Microchip

The Microchip Technology ATF16V8C-5XC is an 8-macrocell, 16V8 electrically erasable programmable logic device with a 5 ns maximum propagation delay, 5 V supply operation, and a 20-pin TSSOP package. It uses EECMOS electrically erasable Flash memory, supports pin-controlled power-down, and implements registered, combinatorial, or complex-mode logic through programmable architecture. A programmable logic device, or PLD, is a semiconductor whose internal digital logic connections can be configured after manufacture. The ATF16V8C belongs to the simple PLD hierarchy: PLD → simple PLD → electrically erasable PLD → EECMOS Flash PLD. Unlike a mask-programmed PAL or a one-time-programmable fuse device, its Flash configuration can be erased and reprogrammed, simplifying logic updates, prototype corrections, and board rework. The principal features include eight macrocells, eight outputs, eight inputs, a 5 ns maximum pin-to-pin delay, and operation across the 5 V supply range specified by the manufacturer datasheet. The architecture is a superset of generic 16R8 devices and can emulate many 20-pin combinatorial PLDs. Each output is allocated eight product terms, while automatically selected operating modes support registered, combinatorial, and more complex logic functions. The ATF16V8C-5XC uses Atmel's proven electrically erasable Flash memory technology rather than ultraviolet-erasable EPROM. Flash programming supports reusable development cycles, while the low-cost software flow helps simplify device programming. A pin-controlled power-down mode can reduce current when the logic does not need to remain active, although exact current and operating-mode limits must be confirmed in the manufacturer datasheet. Typical uses include industrial control logic, decoding and multiplexing, glue logic, interface conditioning, and other fixed digital functions requiring up to eight outputs and a 5 ns performance class. Its 20-pin TSSOP package is appropriate for compact surface-mount assemblies, but designers should verify land pattern, pin assignment, and signal timing against the official datasheet before layout release. The primary design consideration is that device configuration, setup times, output feedback, OE handling, and power-down behavior must be treated as part of the timing design. The datasheet should be checked for the exact operating mode selected by the programming file, especially when registered outputs or feedback paths are used. PCB design should also provide a stable supply and clean routing for high-speed digital edges. This page consolidates verified manufacturer and distributor information, practical programming and layout guidance, and a parameter comparison of same-package ATF16V8C speed alternatives. It also distinguishes verified facts from fields that require confirmation from the complete datasheet, preventing unverified timing, pinout, and pricing assumptions from being presented as engineering data.

RFQ پەیوەندی
ATF16V8C-7JC - 7.5ns 16V8 EECMOS PLD | Microchip
ATF16V8C-7JC

ATF16V8C-7JC - 7.5ns 16V8 EECMOS PLD | Microchip

The Microchip Technology ATF16V8C-7JC is a high-performance 16V8 electrically erasable programmable logic device with 8 macrocells, a 7.5 ns propagation delay, and a 20-pin PLCC (9x9 mm) package. It uses EECMOS architecture and electrically erasable flash-memory technology to implement complex combinational or registered logic in a compact standard-power device. A programmable logic device, or PLD, is a semiconductor whose internal logic connections can be configured after manufacture. The ATF16V8C belongs to the broader hierarchy of programmable logic ICs, CPLDs, and digital logic semiconductors. Its 16V8 architecture combines 16 inputs and 8 outputs with eight configurable macrocells. The manufacturer datasheet states that the architecture emulates many 20-pin PAL devices and most 20-pin combinatorial PLDs, making it useful for consolidating several fixed-logic functions into one programmable component. Key device features include a maximum pin-to-pin delay of 5 ns in the broader ATF16V8C family, the 7.5 ns speed grade represented by ATF16V8C-7JC, and an optional pin-controlled power-down function that can reduce total supply current below 100 µA. The device supports CMOS and TTL-compatible interfacing. Speed options extend down to 5 ns, while the ATF16V8C-7JC specifically occupies the 7 ns speed designation associated with the distributor listing. The ATF16V8C uses a superset of generic 16R8 architectures and provides eight product terms per output through its eight macrocells. Software automatically configures the operating mode for combinational, registered, or mixed logic functions. This architecture allows each output to implement equations with multiple product terms while retaining the software-oriented design flow associated with 20-pin PAL-compatible logic. Typical uses include industrial control-interface decoding, address and command decoding, legacy peripheral glue logic, product-term Boolean equations, and timing-sensitive control logic where a 7.5 ns device is preferable to slower general-purpose programmable logic. The electrically erasable memory allows the configuration to be reprogrammed during development or field updates without replacing the device. The principal design consideration is voltage and timing compatibility with the existing board. The manufacturer describes industrial-range operation over 5 V ±10% and commercial-range operation over 5 V ±5%, subject to the relevant speed-grade and temperature qualification. Designers should also confirm whether pin 4 is assigned to the optional power-down function before treating it as an ordinary logic input. This page consolidates verified manufacturer and distributor information, distinguishes verified same-package alternatives from non-drop-in package variants, and adds practical comparison and design guidance that is not presented as raw datasheet specification data.

RFQ پەیوەندی
ATF16V8C-7JI - 7.5ns 8-Macrocell EE PLD | Microchip
ATF16V8C-7JI

ATF16V8C-7JI - 7.5ns 8-Macrocell EE PLD | Microchip

The Microchip ATF16V8C-7JI is a 5 V electrically erasable programmable logic device (EE PLD) with eight configurable macrocells, a 7.5 ns operating speed, and a 20-pin PLCC J-lead surface-mount package. It uses EECMOS architecture and electrically erasable flash memory to implement registered, complex, or combinational logic while retaining nonvolatile configuration memory. A programmable logic device is a semiconductor that stores user-defined Boolean logic in a nonvolatile configuration structure. The ATF16V8C belongs to the 16V8 SPLD family, combining a 20-pin PAL-compatible architecture with eight macrocells. Each output can allocate eight product terms, and software automatically configures the supported operating modes, allowing the device to implement more complex logic than basic combinational PAL devices. Key characteristics include an industry-standard 16V8 architecture, emulation of many 20-pin PAL devices, low-cost programming tools, CMOS and TTL-compatible interfaces, and a maximum pin-to-pin delay of 5 ns across the supported ATF16V8C speed options. The -7JI grade is identified in distributor data as an industrial-temperature 7.5 ns device. The family also includes a 100 µA pin-controlled power-down option, although the verified excerpt does not confirm that option for every suffix. Technically, the ATF16V8C combines EECMOS processing with nonvolatile flash-based configuration. This supports in-circuit reconfiguration without volatile configuration loss and allows the eight outputs to implement registered or combinational functions. Because the device targets 5 V systems, its input thresholds and output behavior should be checked against the connected CMOS or TTL logic rather than assumed from modern low-voltage devices. Typical applications include industrial control logic, interface decoding, state-machine implementation, glue logic, legacy control-panel logic, and compact combinational or sequential functions where a small PLD is more flexible than a fixed gate array. The 9 mm by 9 mm PLCC package also supports repair and upgrade programs that previously relied on 20-pin PAL devices. Designers should preserve the J-lead land pattern, validate the programmed fuse file against the selected architecture, and confirm input levels, timing, and unused-pin requirements in the manufacturer datasheet. This page combines verified manufacturer and distributor data, drop-in family options, and practical replacement guidance to support legacy PLD design maintenance.

RFQ پەیوەندی
ATF16V8C-7JU - 7ns 16V8 EECMOS PLD | Microchip
ATF16V8C-7JU

ATF16V8C-7JU - 7ns 16V8 EECMOS PLD | Microchip

Microchip ATF16V8C-7JU is a 16V8 electrically erasable CMOS programmable logic device with 8 macrocells, a 7 ns target speed, and a 20-pin PLCC package measuring 9 x 9 mm. The device is based on EECMOS flash-memory technology, supports in-system reprogramming, and includes a pin-controlled power-down option with 100 µA current in the ATF16V8C family. A programmable logic device, or PLD, is a semiconductor whose internal digital logic is configured after manufacture. The ATF16V8C belongs to the simple PLD family within the broader programmable-logic hierarchy. It provides more integration than a collection of individual gates while avoiding the software and hardware complexity of a field-programmable gate array. Its eight outputs are each allocated eight product terms, enabling combinational logic functions and registered operations to be implemented in one device. Key features include eight macrocells, a 16-input by 8-output organization, EECMOS nonvolatile flash configuration, and a 7 ns speed grade for the ATF16V8C-7JU. The manufacturer describes the ATF16V8C family as a superset of generic 16R8 architectures, allowing direct replacement of the 16R8 family and many 20-pin combinatorial PLDs. Three configurable operating modes support different registered, combinatorial, and mixed logic arrangements. The 20-pin PLCC package provides eight user I/O resources according to the listed device specification while retaining dedicated control functions required for programming and operation. Its ceramic LCC-20 construction is identified in the product listing as ceramic, with a 9 x 9 mm package body. The 58.8 MHz internal-frequency figure and 5 V operating voltage identify the device's speed and supply characteristics, while the 300-gate description expresses its approximate logic capacity. Typical uses include interface control, address decoding, command sequencing, industrial automation, embedded control, and compact glue-logic implementations. Because the configuration is electrically erasable, the same PLD can be reprogrammed during development or manufacturing without relying on a one-time fuse. This is particularly useful when logic behavior evolves after prototype hardware has been laid out. When assigning PCB connections, use the complete pin-description table in the manufacturer datasheet rather than inferring PLCC numbering from a generic 16V8 symbol. Confirm programming voltage, signal levels, clocking requirements, and unused-pin treatment in the same document. PCB layout should preserve the device footprint, provide adequate clearance around the ceramic package, and route programming signals away from sensitive analog or high-speed nets. This page combines the manufacturer's device description, the exact MPN specifications, sourcing status, package details, and practical implementation guidance. It also distinguishes the confirmed 7 ns ATF16V8C-7JU from related slower or differently qualified ATF16V8 devices, helping engineers identify when a true pin-compatible substitution is available and when redesign or requalification is necessary.

RFQ پەیوەندی
ATF16V8C-7PI - 7ns 16V8 EECMOS PLD | Microchip
ATF16V8C-7PI

ATF16V8C-7PI - 7ns 16V8 EECMOS PLD | Microchip

The Microchip Technology ATF16V8C-7PI is a 7 ns, 16V8-family EECMOS programmable logic device with eight macrocells, eight outputs, and a 20-pin PDIP package. It operates from a nominal 5 V supply, supports CMOS and TTL-compatible interfacing, and uses electrically erasable Flash memory for nonvolatile configuration. The industrial-temperature suffix identifies it for industrial applications, while the -7 speed designation corresponds to a 7 ns maximum pin-to-pin delay. An EECMOS PLD is a user-programmable digital logic device within the broader semiconductor and logic-IC hierarchy. Its Flash configuration memory allows a design to retain programmed Boolean equations after power removal, avoiding separate EPROM programming equipment. The ATF16V8C architecture implements a superset of generic 16R8 and many 20-pin combinatorial PAL architectures, providing eight product terms per output and flexible registered, combinatorial, and complex-mode configurations. Key features include a 7 ns maximum propagation delay for the -7 grade, eight macrocells, eight I/O outputs, a nominal 5 V operating supply, and low-power pin-controlled shutdown. The family supports operating speeds down to 5 ns, while the -7PI order code represents a 7 ns industrial-temperature option. Flash programmability simplifies in-circuit updates, and the device provides a practical migration path for compact glue-logic implementations formerly handled by multiple 20-pin PAL devices. The ATF16V8C uses EECMOS technology to combine nonvolatile configuration with CMOS-compatible logic. Product terms are automatically distributed among the eight macrocells according to the selected architecture and equations, allowing moderately complex control, decode, interface, and glue-logic functions in one package. CMOS and TTL compatibility simplifies connections to older host buses and peripheral logic, although designers should still verify voltage and timing requirements for every connected device. Typical applications include industrial interface decoding, legacy bus-control logic, address decoding, command multiplexing, alarm and sequencing logic, and compact peripheral adapters. The 20-pin PDIP format is especially useful for prototypes, legacy industrial equipment, and through-hole assemblies where a low-density programmable logic device is preferred over a larger FPGA or microcontroller. Design consideration: programmers should validate the JEDEC fuse state, operating-mode assignments, and AC timing against the actual board loads. Because the ATF16V8C is a fixed-architecture PLD rather than a general-purpose processor, it is most appropriate when the required Boolean equations fit within eight macrocells and eight product terms per output. This page consolidates verified manufacturer and distributor information, package-specific alternatives, pricing availability, pin assignments, and practical selection guidance. It also distinguishes true pin-compatible options from related speed grades that may alter timing margins even when they use the same PDIP footprint.

RFQ پەیوەندی
ATF16V8C-7PU - 7ns 300-Gate 16V8 SPLD PLD | Microchip Technology
ATF16V8C-7PU

ATF16V8C-7PU - 7ns 300-Gate 16V8 SPLD PLD | Microchip Technology

The Microchip Technology ATF16V8C-7PU is a high-performance EECMOS electrically-erasable programmable logic device (PLD) providing 8 macrocells and 300 gates of logic in a 20-pin PDIP package, with a 7 ns propagation delay and industrial-grade temperature rating. It is built on Atmel-proven electrically-erasable flash memory technology, giving non-volatile, in-circuit re-programmable logic without UV erase cycles. A simple programmable logic device (SPLD) is a member of the programmable logic device family, sitting between fixed logic and mask-programmed PAL devices. Where a PAL must be sent to the mask vendor and a GAL/CPLD carries more silicon, an SPLD delivers a small, fixed macrocell array with three configurable operating modes selected automatically by the programming software. In the system hierarchy, an SPLD sits under PLD, under programmable logic, under integrated logic ICs. Key features of the ATF16V8C-7PU include eight outputs each allocated eight product terms, three automatically configured modes of operation that allow highly complex logic functions, speeds down to 5 ns across the family, and a pin-controlled power-down mode in which supply current falls below 100 microamps. A pin-keeper circuit on each input and output holds the last valid state during power-down, so downstream logic does not see undefined levels on startup. All speed grades are specified over 5 V plus or minus 10 percent for industrial temperature range and 5 V plus or minus 5 percent for commercial range. Technically, the device is a superset of the generic 16R8 architecture, which allows direct replacement of the 16R8 family and most 20-pin combinatorial PLDs. Eight outputs are each allocated eight product terms, and the pin arrangement accepts the conventional 16V8-style clock, feedback and output-enable assignments used by classic GAL/16V8 designs. The 7 ns speed grade means combinational paths resolve in roughly 7 ns, supporting clock rates near 70 MHz in registered configurations. Typical applications include legacy 16V8 glue logic, address and control decoding in industrial control equipment, counter and state-machine logic in instrumentation, bus interface decoding in peripheral cards, and retrofits of older designs that need re-programmable logic without changing the board footprint. When designing with the ATF16V8C-7PU, confirm that pin 4 is used as the power-down control input if low standby current is required; otherwise pin 4 may be used as an ordinary logic input. Use the pin description table in the manufacturer datasheet when assigning PCB tracks, and keep the 0.1 uF decoupling capacitor close to VCC pin 20. This page consolidates drop-in replacement options, package and pinout details, and practical application guidance for the ATF16V8C-7PU that are not gathered together in the manufacturer datasheet.

RFQ پەیوەندی
ATF16V8C-7SC - 7.5ns EECMOS PLD | Microchip | Logic Control
ATF16V8C-7SC

ATF16V8C-7SC - 7.5ns EECMOS PLD | Microchip | Logic Control

The Microchip Technology ATF16V8C-7SC is a high-performance EECMOS programmable logic device with a 7.5 ns pin-to-pin delay, eight macrocells, and a 20-SOIC package. It combines electrically erasable flash memory with CMOS and TTL-compatible inputs and outputs, making it suitable for implementing combinational and registered control logic in industrial electronic systems. A programmable logic device is a semiconductor whose internal digital functions are configured by stored programming data. In the product hierarchy, the ATF16V8C-7SC is a PLD, a specialized logic IC, and an integrated circuit. Its architecture can emulate many 20-pin PAL devices and most 20-pin combinatorial PLDs, providing a practical way to consolidate several fixed gate functions into one configurable device. Key features include eight macrocells, eight product terms allocated to each output, a 7.5 ns speed grade, and a pin-controlled power-down option that reduces supply current to 100 µA. Inputs and outputs support CMOS and TTL interfacing, while I/O pin-keeper circuitry helps retain input states. The device is specified for a commercial 5 V ±5% supply range, while faster and industrial-grade options are available elsewhere in the ATF16V8C family. The ATF16V8C incorporates a superset of the generic architectures used by the 16R8 family and many 20-pin combinatorial PLDs. Software automatically configures three operating modes, allowing the same physical device to support different registered, combinatorial, and mixed logic organizations. This flexibility makes it useful for legacy PAL replacement and compact control logic consolidation. Typical applications include industrial control interfaces, legacy 20-pin PAL replacement, address decoding, command and status logic, interface control, and fixed-function logic consolidation. The 20-SOIC package supports conventional surface-mount assembly, while electrically erasable flash technology allows a device to be reprogrammed without removing it from the circuit. Designers should verify the exact pinout, programming architecture, supply tolerance, and timing constraints against the manufacturer datasheet before substitution. A speed-grade change can affect system timing even when the package is unchanged, and an industrial-grade replacement may have different operating and qualification requirements. This page consolidates manufacturer specifications, sourcing information, package details, practical engineering guidance, and validated drop-in candidates. It also distinguishes genuine pin-compatible alternatives from slower family members that may require timing review.

RFQ پەیوەندی
ATF16V8C-7SI - 7.5ns 8-Macrocelle PLD | Microchip Technology
ATF16V8C-7SI

ATF16V8C-7SI - 7.5ns 8-Macrocelle PLD | Microchip Technology

Microchip Technology ATF16V8C-7SI is a 7.5 ns high-performance electrically erasable programmable logic device with eight macrocells, a 300-gate 16V8 architecture, and a 20-SOIC package. It operates from a nominal 5 V supply, supports 5 V ± 10% in the industrial temperature option, and is built on EECMOS electrically erasable flash-memory technology. A programmable logic device, or PLD, implements fixed digital logic functions that are configured in software rather than permanently connected with individual gates. The ATF16V8C family combines an 8-macrocelle architecture with multiple registered and combinational operating modes. Its architecture is a superset of generic 16R8 devices and can directly replace most 20-pin combinatorial PLDs, making it useful for compact control, decoding, address translation, and glue-logic designs. The ATF16V8C-7SI provides a 7.5 ns maximum device speed, 8 macrocells, and approximately 300 gates. It supports a pin-controlled power-down option with 100 µA current. The manufacturer describes the family as CMOS and TTL compatible and identifies speed options down to 5 ns. Eight outputs are each allocated eight product terms, enabling more complex combinational functions than a basic dual-in-line PAL arrangement. The device uses electrically erasable flash-memory technology, allowing its logic configuration to be programmed or erased without a dedicated programmer. Its 16V8 architecture supports complex logic functions configured automatically by software, while the 20-pin SOIC package supports conventional through-hole assembly and PCB compatibility with established 20-pin PLD designs. Typical uses include industrial control and instrumentation, legacy interface decoding, programmable I/O expansion, embedded system address decoding, and compact peripheral-control logic. The ATF16V8C-7SI is especially relevant to brownfield equipment where an existing GAL16V8 or compatible 20-pin combinational PLD footprint must be retained. When replacing an older GAL16V8, verify the configured fuse map, power-down behavior, termination requirements, and output timing. Although ATF16V8C devices are pin-to-pin and JEDEC fusemap compatible with GAL16V8 devices, AC and DC characteristics can contain minor differences that should be checked against the original design requirements. This product record combines the ATF16V8C family architecture, package and speed details, drop-in replacement guidance, and practical design considerations into a focused guide for engineers maintaining or designing around 20-pin erasable programmable logic systems.

RFQ پەیوەندی
ATF16V8C-7SU - 7ns 16V8 EECMOS PLD | Microchip Technology
ATF16V8C-7SU

ATF16V8C-7SU - 7ns 16V8 EECMOS PLD | Microchip Technology

The Microchip Technology ATF16V8C-7SU is a 7 ns 16V8 EECMOS programmable logic device with eight macrocells, eight user I/Os, and 300 logic gates in a 20-pin SOIC package. It combines electrically erasable Flash memory with pin-controlled power-down capability, making it suitable for compact control, decoding, and combinational logic designs. A programmable logic device, or PLD, is a semiconductor whose internal digital logic is configured for a specific function. The ATF16V8C belongs to the SPLD family, which sits between fixed logic gates and larger FPGAs. Its 16V8 architecture provides a practical way to consolidate multiple gates and combinatorial functions into one reprogrammable component, reducing board area while retaining reusable configuration memory. The ATF16V8C uses Atmel's EECMOS process and electrically erasable Flash technology for nonvolatile, in-circuit reprogramming. According to the manufacturer datasheet, each of the eight outputs is allocated eight product terms. The architecture supports automatic configuration into three operating modes, allowing more complex logic functions than a basic fixed AND-OR array. The ATF16V8C family supports speed grades down to 5 ns, while the ATF16V8C-7SU is identified as a 7 ns industrial-temperature, green-rated variant in the supplied distributor data. An optional pin-controlled power-down function can reduce supply current to less than 100 microamperes. The device also includes pin-keeper circuitry, helping preserve input states when the input buffer is disabled. Typical uses include industrial control logic, interface decoding, state-machine implementation, peripheral glue logic, and compact embedded-control subsystems. Because the ATF16V8C architecture is described as a superset of generic 16R8 and many 20-pin combinatorial PLD architectures, it can simplify logic consolidation when board space and component count are important. Designers should verify the configured fuse map, pin assignments, and power-down use of pin 4 before release. When power-down is enabled, output data and internal logic states are latched and held; otherwise pin 4 may serve as a logic input. This page combines verified manufacturer and distributor data with practical selection guidance, comparison information, and design notes.

RFQ پەیوەندی
ATF16V8C-7XC - 7ns 16V8 EECMOS PLD | Microchip Technology
ATF16V8C-7XC

ATF16V8C-7XC - 7ns 16V8 EECMOS PLD | Microchip Technology

Microchip Technology ATF16V8C-7XC is a 16V8 high-performance EECMOS programmable logic device with 8 macrocells, 300 gates, and a 7 ns rated speed in a 20-TSSOP package. It uses electrically erasable flash memory for in-circuit reconfiguration and includes a pin-controlled power-down mode with 100 µA current consumption. A programmable logic device, or PLD, is a configurable semiconductor that implements digital logic functions from AND, OR, and related Boolean terms. The ATF16V8C belongs to the simple PLD family, where each of its 8 macrocells can support a dedicated output function. This places it between fixed logic gates and larger complex PLDs, providing compact hardware implementation of glue logic, control functions, decoding, and compact state-machine functions. The ATF16V8C architecture emulates many 20-pin PAL devices and most 16R8-family combinational PLDs. Its 16V8 organization provides eight outputs, with each output allocated eight product terms. Three configurable operating modes allow software to implement increasingly complex combinational and registered logic functions. The device is also compatible with CMOS and TTL logic levels, which simplifies integration with mixed digital circuits. ATF16V8C-7XC uses proven electrically erasable flash memory rather than a one-time-programmable fuse structure. Designers can change the programmed configuration without replacing the device, which is useful during prototyping, production revision, or field updates. The manufacturer describes speed options down to 5 ns, while this exact 7 ns ordering code is identified as a commercial-temperature 20-TSSOP variant. Typical uses include address decoding, control-signal generation, interface adaptation, protocol translation, and compact finite-state-machine logic. The ATF16V8C can reduce the number of discrete gates required for glue logic while retaining user-programmable flexibility. A programmer or development system is required to create and download the configuration file before normal operation. Designers should verify the configured operating mode, pin assignment, and power-down polarity in the manufacturer pin description table. Decoupling and signal-integrity practices remain important because an 8 macrocell PLD can still be sensitive to noisy supply rails or poorly controlled clock and asynchronous inputs. The 20-TSSOP footprint is compact but requires careful fanout and thermal assessment. This product page combines the manufacturer architecture description with practical replacement guidance, package information, programming considerations, and verified sourcing references. It is intended to help engineers identify whether the ATF16V8C-7XC architecture, speed grade, temperature class, and 20-TSSOP footprint fit a legacy or new programmable-logic design.

RFQ پەیوەندی
ATF16V8C-7XU - 7ns 8-Macrocell EECMOS PLD | Microchip
ATF16V8C-7XU

ATF16V8C-7XU - 7ns 8-Macrocell EECMOS PLD | Microchip

The Microchip Technology ATF16V8C-7XU is a 5 V electrically erasable programmable logic device with 8 macrocells, 7.5 ns speed, and a 20-pin TSSOP package. It uses EECMOS flash-memory technology for in-circuit reconfiguration and provides eight outputs, each allocated eight product terms. The ATF16V8C architecture combines three configurable operating modes that support registered, complex, and combinatorial logic, making the device suitable for compact glue-logic and legacy logic replacement designs. A programmable logic device, or PLD, is a semiconductor whose internal logic connections are stored in nonvolatile memory. A PLD sits between fixed-function logic ICs and programmable processors in the broader digital-design hierarchy. EECMOS PLDs retain their programmed configuration when power is removed and can be reprogrammed without a dedicated programmer. The ATF16V8C therefore combines the deterministic propagation delays of conventional PAL-type logic with the flexibility of software-configurable hardware. The ATF16V8C family provides a 5 V input supply, 8 macrocells, and eight product terms per output. According to the manufacturer datasheet, the architecture forms a superset of generic 16R8 devices and most 20-pin combinatorial PLD arrangements. The ATF16V8C-7XU speed grade is specified at 7.5 ns in distributor records, while the broader family supports options down to 5 ns. A pin-controlled power-down option can reduce consumption to approximately 100 uA when the device is not actively required. Three operating configurations allow the same device to implement registered sequential functions, complex combinational functions, or simple combinatorial equations. Each of the eight outputs receives eight dedicated product terms, while the sum-of-products structure supports programmable AND, OR, and inversion relationships. This makes the ATF16V8C useful when several small gates, counters, decoders, selectors, or state-machine transitions must be consolidated into one package. Typical applications include industrial control and instrumentation, legacy peripheral-interface decoding, address and command translation, data-routing logic, and small embedded control systems. The 20-pin TSSOP package supports compact surface-mount PCB layouts, while tube packaging supports automated or manual component handling. Compared with a discrete gate array, the programmable device reduces package count and provides predictable interconnect delays. Compared with an FPGA or microcontroller, it requires less general-purpose computation and typically offers simpler, lower-power logic implementation. Designers should verify the fuse map, pin assignments, and JEDEC compatibility before substituting this device into an existing board. The ATF16V8C supports common 16V8 and GAL16V8-style architectures, but device-specific power-down, AC, and DC characteristics must be checked against the original design. Use the manufacturer programming specification and the pin-description table to assign every package lead correctly. This page combines the ATF16V8C-7XU electrical identity, package details, application guidance, pinout location, and same-footprint replacement analysis in a format designed to help engineers evaluate legacy PLD designs and manufacturing continuity.

RFQ پەیوەندی
ATF16V8CZ-12JC 12ns 250-Gate CPLD | Microchip Technology
ATF16V8CZ-12JC

ATF16V8CZ-12JC 12ns 250-Gate CPLD | Microchip Technology

The Microchip Technology ATF16V8CZ-12JC is a 250-gate simple programmable logic device with eight macrocells, up to 16 inputs, eight I/Os, 12 ns maximum pin-to-pin delay, and a 20-pin PLCC package measuring 9 x 9 mm. The ATF16V8CZ family uses electrically erasable Flash memory and provides zero-power operation with a 5 V supply. A simple programmable logic device is a digital semiconductor that implements a fixed sum-of-products logic function through user-programmed configuration memory. The ATF16V8CZ belongs to the SPLD hierarchy, where each of its eight macrocells combines product terms and output control functions. Its architecture can directly replace the 16R8 family and most 20-pin combinatorial PLDs, making it useful for consolidating several fixed-format logic functions onto one device. Principal features include 250 gates, eight macrocells, 16 input paths, eight I/Os, and a maximum propagation delay of 12 ns. The device supports CMOS- and TTL-compatible inputs and outputs. A typical 5 uA edge-sensing power-down mode and a 25 uA standby current help reduce consumption when the active input edges stop. Because the configuration is electrically erasable, the logic can be changed without a dedicated programmer. The ATF16V8CZ architecture assigns eight product terms to each output and provides configurable operating modes for more complex combinational functions. Its Flash-based configuration technology permits electrical erasure and reprogramming, while its 83 MHz maximum operating frequency supports control logic operating well beyond the external logic delay limit. The exact input and output architecture should be confirmed in the manufacturer pin-description table before assigning PCB signals. Typical applications include industrial control interfaces, legacy peripheral decoding, address and command multiplexing, alarm and interlocks, data-routing logic, and compact glue-logic blocks around older processors. The device is particularly useful when a design needs many fixed logic functions but does not require a microcontroller or complex FPGA configuration system. For a new PCB, confirm the 20-pin PLCC footprint, supply decoupling, programming access, and all unused-pin states against the manufacturer documentation. The -12 speed grade provides a 12 ns maximum pin-to-pin delay, so timing-sensitive paths should be evaluated with the actual output loading and system clock arrangement. This page combines package, logic-capacity, timing, power-mode, and compatibility information with application guidance, pinout-location advice, replacement considerations, and a parameter-by-parameter comparison. It is designed to help engineers identify whether the ATF16V8CZ-12JC matches an existing CPLD or legacy PLD design before beginning board conversion.

RFQ پەیوەندی
ATF16V8CZ-12JX - 12ns 8-Macrocell PLD | Microchip
ATF16V8CZ-12JX

ATF16V8CZ-12JX - 12ns 8-Macrocell PLD | Microchip

Microchip Technology ATF16V8CZ-12JX is a high-performance electrically erasable programmable logic device with 8 macrocells, a 12 ns maximum pin-to-pin delay, and a 5 V supply. It is packaged in a 20-pin J-lead PLCC measuring 9 mm by 9 mm. The device supports up to 16 inputs, eight configurable I/O outputs, 250 gates, and CMOS- and TTL-compatible interfaces. An EEPLD, or electrically erasable programmable logic device, combines programmable AND-array logic, OR-array logic, and output macrocells in a reusable CMOS semiconductor. Its position in the logic hierarchy is EEPLD to SPLD to programmable logic device to integrated logic IC. The ATF16V8CZ architecture extends the capabilities of 16R8 devices and most 20-pin combinatorial PLDs, allowing one package to implement compact combinational or registered control logic. The principal features include 12 ns maximum propagation delay, 25 µA standby power, zero-power operation, eight macrocells, and eight outputs allocated eight product terms each. Three operating modes are selected automatically by programming software. This combination supports interface decoding, address decoding, state-machine control, bus arbitration, and legacy PAL replacement while allowing the device to be reprogrammed rather than replaced for logic revisions. Each output macrocell supports combinational, registered, or complex combinatorial operation, while eight dedicated input pins extend the total input capability to 16. The electrically erasable Flash-memory configuration permits repeated programming with dedicated software. CMOS- and TTL-compatible inputs and outputs facilitate use in mixed legacy systems, although designers should verify every external signal against the complete timing and electrical limits before finalizing a system. Typical uses include peripheral control, industrial equipment, instrumentation, test systems, and small control subsystems where one PLCC can consolidate multiple gates. It is also appropriate for replacing compatible 16R8 and selected 20-pin combinatorial PLDs after confirming pinout, speed, power, and temperature requirements. A new design should also consider whether a current CPLD or FPGA provides useful additional capacity or features. The principal design constraint is timing margin at the specified 12 ns speed grade. Treat 12 ns as the maximum pin-to-pin delay rather than a guaranteed system settling time, and include external logic, interconnect, skew, and setup-and-hold requirements in the timing budget. Follow the manufacturer pin-assignment table and recommended decoupling guidance when laying out the PCB. This product page combines the manufacturer device architecture, package and timing characteristics, substitution relationships, and practical selection guidance. It is intended to accelerate engineering review while making clear which parameters require final confirmation against the current Microchip documentation.

RFQ پەیوەندی
ATF16V8CZ-12PC - 12ns 16V8 EE PLD | Microchip Technology
ATF16V8CZ-12PC

ATF16V8CZ-12PC - 12ns 16V8 EE PLD | Microchip Technology

The Microchip Technology ATF16V8CZ-12PC is a high-performance electrically erasable programmable logic device with 8 configurable macrocells, up to 16 inputs, and 8 configurable I/Os. It operates from a 5 V supply, provides a maximum pin-to-pin propagation delay of 12 ns, and is packaged in a 20-pin PDIP for through-hole PCB installation. A simple programmable logic device, or SPLD, combines a fixed AND-OR logic structure with user-programmable configuration data. The ATF16V8CZ belongs to the broader PLD hierarchy, which includes simple PLDs, complex PLDs, field-programmable gate arrays, and other programmable-logic technologies. Its configurable architecture makes it suitable for implementing fixed Boolean functions without replacing the device whenever a modest logic change is required. The ATF16V8CZ architecture provides eight macrocells, with eight product terms allocated to each output. It supports up to 16 inputs and eight I/Os, while three configurable operating modes allow complex combinational and registered logic functions to be realized. Its electrically erasable configuration technology supports low-power operation, with the ATF16V8CZ family identified as a zero-power, 5 V programmable logic device. The 12 ns maximum pin-to-pin delay is the principal speed grade represented by the -12 designation. CMOS and TTL-compatible inputs and outputs simplify interfacing with conventional digital logic families. The device also offers a 25 µA standby-power specification and can emulate many 20-pin PAL devices and most 20-pin combinatorial PLDs, making it a practical consolidation option for legacy logic designs. Typical uses include industrial control logic, interface decoding, data routing, encoder and decoder functions, state-machine implementation, and glue logic for older processor-based systems. Its electrically erasable configuration is especially useful where logic must be updated during development or maintenance without using a one-time-programmable fuse technology. The principal design consideration is timing. Designers should use the manufacturer datasheet pin description and timing tables to assign clock, feedback, input, and output functions. Because the -12 grade has a maximum 12 ns pin-to-pin delay, external setup and hold requirements must still be checked against the actual system clock and the selected output mode. This product overview consolidates the device architecture, package information, timing class, application guidance, and replacement considerations into an engineer-focused reference. It also distinguishes verified drop-in choices by speed grade and package so procurement teams can identify candidates without treating every functionally similar PLD as electrically and mechanically interchangeable.

RFQ پەیوەندی
ATF16V8CZ-12SC - 12ns 8-Macrocell EEPLD | Microchip
ATF16V8CZ-12SC

ATF16V8CZ-12SC - 12ns 8-Macrocell EEPLD | Microchip

Microchip Technology ATF16V8CZ-12SC is a 12 ns, electrically erasable programmable logic device with 8 macrocells, up to 16 inputs, and 8 configurable I/Os, housed in a 20-SOIC package. It operates from a 5 V supply and combines CMOS and TTL-compatible inputs and outputs with zero-power operation and a 25 µA standby-current specification. An electrically erasable programmable logic device, or EEPLD, belongs to the programmable-logic hierarchy alongside PAL and GAL devices. Unlike a mask-programmed PLD, its fuse configuration can be changed by programming equipment. The ATF16V8CZ architecture supports registered, combinatorial, and complex-mode logic configurations selected through the device programming files, making it useful for consolidating multiple gates and flip-flops into one configurable logic component. The ATF16V8CZ family provides 250 usable gates, eight outputs, and up to 16 input terms. Each output is allocated eight product terms. A maximum pin-to-pin propagation delay of 12 ns characterizes the -12 speed grade, allowing the device to address general-purpose industrial control, interface decoding, data routing, and compact control logic where moderate timing performance is sufficient. The ATF16V8CZ incorporates a superset of common 16R8 and 20-pin combinatorial PLD architectures, helping simplify replacements when migrating older PAL-compatible designs. Its outputs support TTL-compatible interfacing, and its electrically erasable configuration allows design revisions without changing the PCB. A zero-power specification and low 25 µA standby current are useful where inactive-state power is important. Typical uses include industrial control logic, consumer-equipment decoding, automotive interface functions, keyboard or display control, and compact combinational or registered logic networks. The 20-SOIC package provides a conventional surface-mount footprint for assembly and rework, although modern high-density designs may favor smaller programmable-logic devices when I/O count permits. For reliable implementation, confirm the fuse map and pin assignments against the manufacturer datasheet before manufacturing. Configure the device with compatible programming software, validate every unused input state, and check timing against the full external path rather than only the stated pin-to-pin delay. The -12 speed grade should be selected when its 12 ns maximum propagation delay provides adequate timing margin. This page combines device specifications, practical implementation guidance, application fit, and drop-in replacement analysis to support faster engineering evaluation. It also distinguishes electrically erasable logic from mask-programmed devices and helps designers assess whether the 16-input, 8-output architecture matches the required control system.

RFQ پەیوەندی