بەرهەمەکان (22,000+)

AT91RM9200CJ-100 - ARM920T MPU, 180MHz, 100MHz Ind. Temp | Microchip
AT91RM9200CJ-100

AT91RM9200CJ-100 - ARM920T MPU, 180MHz, 100MHz Ind. Temp | Microchip

The Microchip Technology AT91RM9200CJ-100 is an ARM920T-based embedded microprocessor (MPU) running up to 100MHz core clock for industrial temperature variants, delivering 200 MIPS integer performance with 16-bit/32-bit ARM/Thumb instruction set support. Housed in a 256-ball LFBGA (CJ) package (15x15mm), the part integrates an external memory interface, USB host/device, 10/100 Ethernet MAC, and standard peripherals for industrial control and connectivity designs. A microprocessor (MPU) is a system-on-chip that integrates a CPU core, memory controllers, and peripherals on a single die. Within the broader semiconductor hierarchy, an MPU sits above a microcontroller (MCU) in compute capability, sitting alongside application processors and DSPs. The ARM920T core inside the AT91RM9200 adds a Memory Management Unit (MMU), enabling full operating systems such as Linux and embedded Windows CE, unlike MCU-class ARM7 parts that run bare-metal or RTOS-only. Key features include a 16KB instruction cache plus 16KB data cache, write buffer, debug access port supporting JTAG-ICE, dedicated DBGU UART debug channel, embedded trace macrocell (ETM9) for real-time trace, and a power management controller with idle, slow-clock and peripheral-level gating. The external bus interface (EBI) supports SDRAM, SRAM, NAND flash with ECC, and CompactFlash, enabling flexible system memory architectures. Typical applications for the AT91RM9200CJ-100 include industrial gateways and protocol converters, networked PLCs, point-of-sale terminals, embedded HMI panels, and legacy Linux-based control systems where the 256-ball LFBGA (CJ) package provides compact BGA mounting on standard 4-layer PCBs. When designing with this device, allocate adequate ground and decoupling capacitance around the BGA balls, follow the Microchip AT91RM9200 hardware design checklist for SDRAM trace length matching (typically +/-50 mils for the byte-lane groups), and ensure the 32.768kHz slow crystal is placed within 5mm of the RTC pins for oscillator stability.

RFQ پەیوەندی
AT91SAM7A1-AU 40MHz ARM7 ROMless MCU | Microchip Technology
AT91SAM7A1-AU

AT91SAM7A1-AU 40MHz ARM7 ROMless MCU | Microchip Technology

The Microchip Technology AT91SAM7A1-AU is a 16/32-bit ARM7-based ROMless microcontroller operating at up to 40 MHz and packaged in a 144-LQFP 20 x 20 mm surface-mount package. It uses a high-performance 32-bit RISC architecture with a dense 16-bit instruction set, embedded ICE debugging support, and a Debug Communication Channel. The device includes 4 KB of internal RAM, while external memory is required for boot code and application storage because the AT91SAM7A1-AU is ROMless. Its broad set of embedded peripherals is intended for industrial, communications, consumer, networking, and automotive-style control systems where a compact microcontroller and mature ARM7 ecosystem simplify product development. The manufacturer datasheet describes the AT91 SAM7 family as using an ARM7TDMI processor with Thumb-based instruction support, combined with high-density on-chip resources and extensive external-memory interfaces. A microcontroller is a dedicated semiconductor that integrates a processor core, memory, peripherals, and interface logic into one device. The ARM7 core provides a 32-bit RISC execution environment, while the Thumb instruction set supports more compact code representations for memory-constrained embedded products. In the AT91SAM7A1-AU, the ROMless architecture gives the designer control over external flash and SRAM implementation, allowing firmware, boot loaders, operating systems, and application data to be managed externally. This is useful when memory size, update strategy, security, or lifecycle requirements exceed what the internal memory can provide. Key characteristics include a maximum operating frequency of 40 MHz, 4 KB of internal RAM, a ROMless design, and a 144-LQFP package measuring 20 x 20 mm. Embedded ICE and the Debug Communication Channel support in-system debugging and communication-oriented development workflows. The large lead count provides access to the device's processor, memory, and peripheral resources, but it also requires careful escape routing and board-layout planning. Because the MCU is not USB-specific, Ethernet-enabled, or application-specific, its suitability depends on matching its external-memory bus, peripheral mix, voltage requirements, and package to the target system. Typical uses include industrial control panels, building automation modules, serial gateways, data acquisition units, motor and actuator controllers, instrument controls, and embedded communications equipment. Designers can use the AT91SAM7A1-AU when they need a general-purpose ARM7 controller with external memory rather than a highly integrated low-power microcontroller. Debug access and a mature ARM7 development ecosystem make it practical for prototypes, legacy platform maintenance, and products requiring predictable peripheral control. A key design consideration is that external memory configuration must be designed around the AT91SAM7A1-AU's bus and memory-controller requirements. Place decoupling and external-memory circuitry close to the associated pins, keep high-speed traces short, and confirm that the power and ground arrangement supports the complete processor, memory, and peripheral load. This page combines device specifications, package information, drop-in alternatives, application guidance, and engineering-oriented design notes to support component selection and board planning.

RFQ پەیوەندی
AT91SAM7A2-AU - 30MHz ROMless ARM7 MCU | Microchip | LQFP
AT91SAM7A2-AU

AT91SAM7A2-AU - 30MHz ROMless ARM7 MCU | Microchip | LQFP

The Microchip Technology AT91SAM7A2-AU is a 16/32-bit ARM7-based ROMless microcontroller operating at up to 30 MHz, with 16 KB of internal RAM, 57 general-purpose I/O lines, and a 176-lead LQFP surface-mount package measuring 24 mm by 24 mm. Its ARM7 RISC architecture, mixed 16/32-bit instruction set, and integrated debug support target embedded control systems requiring deterministic real-time behavior without an embedded boot Flash memory. According to the Microchip documentation, the device also supports 64 KB of internal high-speed Flash organized into 512 pages and includes embedded ICE and Debug Communication Channel support. An ARM7-based microcontroller is a 32-bit reduced-instruction-set-computing control device whose Thumb instruction mode supports compact 16-bit code while its 32-bit instruction set handles more complex operations. In the product hierarchy, the AT91SAM7A2-AU is a microcontroller, embedded processor, semiconductor, and programmable control component. It sits above general-purpose computing because its peripherals, interrupt structure, and embedded debug interface are tailored to industrial, communications, and real-time equipment. Principal features include a 30 MHz maximum operating frequency, 16 KB of internal RAM, 57 general-purpose I/O lines, and an integrated 10-bit ADC interface. The device provides PWM channels, USART-based serial communications, and an ARM7TDMI-class RISC core. Its 176-LQFP package exposes substantially more I/O and peripheral connections than small leaded packages, making the device suitable for systems that need broad external connectivity while retaining a conventional leaded package for inspection and assembly. The ROMless architecture is the most important engineering distinction. Because the AT91SAM7A2-AU does not provide a complete application program in its internal Flash, a boot system must load firmware into external memory before normal execution. This arrangement can separate boot code from the main application, permit controlled recovery or firmware updates, and allow the same microcontroller target to support different storage configurations. System designers must therefore budget for external memory, address-bus correctness, startup code, and sufficient flash endurance for the selected update strategy. Typical uses include industrial controllers, serial gateways, data acquisition equipment, building-control interfaces, and embedded access systems. The 57 I/O lines support multiple sensors, actuators, communications ports, and status indicators without requiring a companion I/O expander in moderate-complexity designs. The ADC supports analog measurement, while the USART and PWM resources suit sensor monitoring, actuator control, and supervisory communications. The large LQFP footprint is advantageous for prototype accessibility but requires a 176-lead PCB layout and careful consideration of assembly cost. When designing around this device, verify the external-memory interface, boot configuration, pin multiplexing, and signal levels before committing the PCB. Because the part is ROMless, firmware storage and the boot sequence are part of the system architecture rather than optional software details. A legacy ARM7 design should also include the appropriate debugger, startup routines, clock configuration, and memory timing for the selected external devices. This product overview combines the exact orderable MPN, package and core details, practical firmware considerations, and qualified replacement guidance for engineers evaluating an obsolete ARM7 control platform. It also distinguishes true drop-in interchangeability from newer Cortex-M devices that may provide similar peripherals but require different firmware, package layouts, and board resources.

RFQ پەیوەندی
AT91SAM7A3-AU 60MHz ARM7 MCU 256KB Flash 100-LQFP
AT91SAM7A3-AU

AT91SAM7A3-AU 60MHz ARM7 MCU 256KB Flash 100-LQFP

The Microchip Technology AT91SAM7A3-AU is a 32-bit ARM7TDMI microcontroller operating up to 60 MHz, with 256 KB of internal Flash, 32 KB of SRAM, integrated CAN controllers, a 10-bit ADC, timers, and serial communication peripherals in a 100-LQFP package. It belongs to the AT91SAM7A family of ARM Thumb-based embedded-control microcontrollers. An ARM7 microcontroller combines a 32-bit reduced-instruction-set-computing processor with integrated memory and peripherals for embedded control systems. The AT91SAM7A3 architecture combines the ARM7TDMI core with high-speed Flash, SRAM, CAN connectivity, ADC support, timers, and serial interfaces. This hierarchy places the device within the broader category of microcontrollers, embedded processors, and semiconductor components used in industrial, automotive, medical, and communications equipment. The AT91SAM7A3-AU provides 256 KB of high-speed internal Flash and 32 KB of SRAM, allowing firmware and working data to be stored on-chip while reducing external component count. The device operates at up to 60 MHz and includes two 2.0B full CAN controllers, a 10-bit ADC, timers, and multiple serial communication channels. Embedded ICE and Debug Communication Channel support assist development, debugging, and production programming. The AT91SAM7A3 combines a high-performance 32-bit RISC processor with a high-density 16-bit Thumb instruction set. Its integrated CAN capability is useful for networked industrial and automotive control systems, while the ADC supports analog signal acquisition in sensor, measurement, and medical equipment. The 100-LQFP package provides the physical interface required for these mixed signal and communication functions. Typical applications include automotive control modules, industrial automation equipment, medical monitoring systems, CAN-connected embedded controllers, and communications equipment. The integrated CAN controllers are particularly useful when a design requires reliable network communication without adding discrete CAN transceivers, although external transceiver and protection components are still required for physical-layer implementation. Designers should account for the device’s supply voltage limits, peripheral pin multiplexing, clock configuration, and memory map when laying out a PCB. The 100-LQFP footprint should be checked against the manufacturer pin description table before assigning signals. External decoupling, oscillator components, programming access, and CAN transceiver interfaces should follow the reference design guidance in the AT91SAM7A3 documentation. This page combines the verified product characteristics, manufacturer-datasheet information, package details, application guidance, and documented replacement considerations to support faster engineering evaluation and sourcing.

RFQ پەیوەندی
AT91SAM7L64-AU - 36MHz ARM7 MCU, 64KB Flash | Microchip
AT91SAM7L64-AU

AT91SAM7L64-AU - 36MHz ARM7 MCU, 64KB Flash | Microchip

The Microchip AT91SAM7L64-AU is a 36 MHz ARM7-based 16/32-bit microcontroller with 64 KB of Flash program memory, 6 KB of SRAM, and a 128-pin LQFP package measuring 20 mm by 14 mm. The device belongs to the SAM7L family and combines a low-power RISC core with integrated microcontroller peripherals for embedded control applications. A microcontroller is a programmable semiconductor device that integrates a processor core, memory, digital I/O, timers, serial interfaces, and other peripherals on one integrated circuit. The AT91SAM7L64 combines the 32-bit ARM7TDMI processor architecture with 64 KB of embedded Flash and 6 KB of SRAM. This places it in the ARM microcontroller, embedded controller, and power-management-conscious embedded-device hierarchy. The principal device characteristics are a 36 MHz operating frequency, 64 KB of Flash memory, and 6 KB of SRAM. The 128-LQFP package exposes 57 I/O lines according to the product listing. The operating supply range is listed as 3 V to 3.6 V, while the associated AT91SAM7L family datasheet describes the low-power SAM7L architecture and its Flash-based implementation. The ARM7TDMI core supports a 16/32-bit instruction set and provides the processing foundation for control logic, communication management, and state-machine workloads. On-chip Flash supports nonvolatile firmware storage, while the 6 KB SRAM provides working memory for stack operations, buffers, and peripheral data. The large 128-pin package accommodates the device's extensive GPIO and mixed-signal peripheral complement. Typical uses include industrial automation, communication equipment, data acquisition, embedded control panels, and low-power embedded systems. Its 36 MHz processing rate is suitable for real-time control tasks that do not require the memory capacity or peripheral density of a high-end application processor. The 20 mm by 14 mm LQFP also facilitates inspection and rework after soldering. Designers should confirm the pin-level power, ground, clock, reset, and peripheral connections in the manufacturer datasheet before layout release. Decoupling, oscillator stability, programming access, unused-pin handling, and mixed-signal partitioning are critical for reliable operation. Because alternate source listings report inconsistent core-voltage descriptions, verify the exact operating conditions for the ordered device revision against the Atmel SAM7L datasheet. This product page consolidates the verified architectural details, memory configuration, package information, sourcing path, and application-oriented design guidance for engineers evaluating the AT91SAM7L64-AU. It also distinguishes a true pin-to-pin replacement from a merely similar microcontroller, helping prevent incorrect substitutions in an existing 128-LQFP design.

RFQ پەیوەندی
AT91SAM7L64-CU 36MHz ARM7 SAM7L 64KB Flash MCU | Microchip
AT91SAM7L64-CU

AT91SAM7L64-CU 36MHz ARM7 SAM7L 64KB Flash MCU | Microchip

Microchip AT91SAM7L64-CU is a 16/32-bit ARM7 SAM7L microcontroller operating at 36 MHz with 64 KB of embedded Flash memory and 6 KB of SRAM, housed in a 144-BGA package measuring 13 x 13 mm. It is designed for compact embedded control systems requiring low-power operation, integrated serial interfaces, and a broad set of GPIO and peripheral resources. The SAM7L family is an ARM Thumb-based microcontroller family intended for industrial, communications, consumer, and embedded control applications. The AT91SAM7L64-CU combines an ARM7TDMI processor with on-chip flash and SRAM, allowing firmware, configuration data, and application logic to be integrated into a compact device. Its 36 MHz operating frequency supports deterministic control and communication tasks while keeping the system footprint small. Key characteristics include a 144-BGA package, 64 KB of Flash memory, 6 KB of RAM, and operation from a 2.5 V or 3.3 V supply, depending on the product configuration and operating condition. The device also provides a range of embedded resources commonly used in control products, including serial communication peripherals, timer and counter functions, and general-purpose input/output. These resources make the MCU suitable for connected peripherals, industrial controllers, interface modules, and compact embedded products. The ARM7TDMI architecture uses a 32-bit instruction set with Thumb instruction support for code-density-oriented embedded applications. Flash memory supports in-system program updates when the application permits, while the integrated SRAM provides working memory for stacks, buffers, protocol handlers, and control algorithms. Peripheral integration reduces the number of external components needed for a basic control design and helps simplify PCB layout in space-constrained products. Typical applications include industrial monitoring equipment, communications interfaces, embedded control modules, consumer peripherals, and compact automated products. Designers should confirm the exact peripheral set, pin multiplexing, electrical limits, and package dimensions against the manufacturer datasheet before finalizing a PCB layout. The 144-BGA package also requires careful escape-routing planning and adequate manufacturing capability. For new designs, the AT91SAM7L64-CU should be selected when a compact ARM7 MCU with integrated Flash and SRAM is required. For an existing design, verify software compatibility, memory requirements, peripheral assignments, and timing behavior before substituting another controller. This product page combines the available technical specifications, sourcing information, application guidance, and design considerations into a concise engineering reference.

RFQ پەیوەندی
AT91SAM7S128D-AU - 55MHz ARM7TDMI MCU, 128KB Flash, USB | Microchip
AT91SAM7S128D-AU

AT91SAM7S128D-AU - 55MHz ARM7TDMI MCU, 128KB Flash, USB | Microchip

The Microchip (formerly Atmel) AT91SAM7S128D-AU is a 32-bit ARM7TDMI RISC microcontroller operating at up to 55 MHz, integrating 128 KB of Flash and 32 KB of SRAM on-chip, and housed in a 64-pin LQFP (10x10 mm) package. It is a member of the SAM7S flash microcontroller family and targets cost-sensitive, high-volume embedded applications that require USB connectivity. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for program storage, SRAM for runtime data), and a rich set of peripherals (timers, communication interfaces, ADCs, I/O). The AT91SAM7S128D-AU sits within the broader hierarchy: ARM7TDMI core -> ARM7 family -> 32-bit RISC microcontroller -> embedded MCU -> semiconductor IC. Its integrated USB 2.0 Full-Speed Device port differentiates it from competitors by eliminating the need for an external USB transceiver, reducing BOM cost and PCB area in peripheral designs. Key features include a 55 MHz ARM7TDMI core with Thumb instruction set support, 128 KB on-chip Flash, 32 KB SRAM, USB 2.0 Full-Speed Device port, up to 32 peripheral DMA channels, a 10-bit ADC, two USARTs, one UART, two TWI (I2C-compatible) interfaces, an SPI, two 3-channel 16-bit timers, an RTT, a watchdog timer, and a real-time clock. The device operates from 3.0 V to 3.6 V supply and includes an embedded voltage regulator for core logic. Architecturally, the SAM7S series uses a multi-layer AHB/APB bus matrix that allows simultaneous access to peripherals by the CPU and the peripheral DMA controller, eliminating data-transfer bottlenecks typical of single-bus MCUs. The integrated 3.3V LDO regulator and power-on-reset block reduce external component count to a minimum, while the Embedded Flash Controller (EFC) provides Flash read and write access with wear-leveling support. Typical applications include USB peripherals such as HID devices, USB-to-serial adapters, USB barcode scanners, USB keyboards and mice; consumer electronics with embedded control; industrial control nodes; and migration paths for legacy 8-bit designs that require more performance. The aggressive price point and high integration make it well suited to cost-sensitive, high-volume consumer markets. When designing with the AT91SAM7S128D-AU, engineers should ensure the 64-LQFP thermal pad is properly soldered for thermal and electrical performance, and use the integrated voltage regulator's recommended 4.7 µF decoupling capacitors. For USB applications, the D+ and D+ pull-up resistor network must follow the USB 2.0 specification for proper enumeration. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
AT91SAM7S16-AU - 55MHz ARM7 MCU with 16KB Flash | Microchip
AT91SAM7S16-AU

AT91SAM7S16-AU - 55MHz ARM7 MCU with 16KB Flash | Microchip

The Microchip Technology AT91SAM7S16-AU is a 32-bit ARM7TDMI microcontroller operating at up to 55 MHz, with 16 KB of on-chip Flash memory and 4 KB of SRAM in a 48-LQFP 7 x 7 mm package. The device combines a 1.65 V to 1.95 V core supply with an extensive set of real-time peripherals for embedded control, data acquisition, and USB-connected equipment. An ARM7-based microcontroller is a 32-bit RISC system-on-chip designed for embedded control rather than general-purpose computing. The AT91SAM7S series integrates a processor, fast Flash, SRAM, interrupt control, timers, communication interfaces, and analog conversion functions. This integration reduces the component count of an embedded board while providing deterministic interrupt handling and dedicated hardware peripherals. Key features include a 55 MHz ARM7TDMI core, 16 KB Flash organized as 16K x 8, 4 KB of SRAM, USB 2.0 device support, USART, SPI, SSC, and TWI serial interfaces, and an 8-channel 10-bit ADC. The microcontroller is designed for real-time applications in which USB connectivity, mixed-signal measurement, and deterministic peripheral operation are important. The architecture includes a banked Flash organization for instruction execution and a direct-memory-access controller for efficient data movement. Programmable interrupt controllers prioritize real-time events, while the timer and communication blocks reduce the processing burden on the CPU. Its 1.65 V to 1.95 V operating supply suits low-voltage embedded systems requiring deterministic operation from a regulated rail. Typical applications include USB-connected industrial controls, compact data-acquisition terminals, HMI controllers, embedded test equipment, and cost-sensitive consumer products. The 48-LQFP package also makes the device suitable for multilayer boards that cannot use very fine-pitch packages. When laying out a design, place the decoupling capacitors close to the supply pins and route sensitive analog inputs away from high-current switching nodes. Confirm USB transceiver, clock, and I/O voltage requirements against the manufacturer datasheet before releasing the PCB, particularly when the MCU operates from a 1.8 V core rail. This page consolidates device specifications, package details, sourcing guidance, design notes, and verified drop-in information to support faster component selection and hardware planning.

RFQ پەیوەندی
AT91SAM7S16-MU - 55MHz ARM7 MCU | Microchip Technology
AT91SAM7S16-MU

AT91SAM7S16-MU - 55MHz ARM7 MCU | Microchip Technology

Microchip Technology AT91SAM7S16-MU is a 32-bit RISC microcontroller with an ARM7TDMI core operating up to 55 MHz, 16 KB of embedded Flash program memory, and 4 KB of SRAM in a 48-QFN 7 x 7 mm package. The device provides 21 general-purpose I/O pins and an industrial temperature range of -40°C to +85°C. Its operating core supply range is 1.65 V to 1.95 V. A microcontroller is a programmable control IC that integrates a processor core, nonvolatile program memory, working RAM, and peripherals on one device. The AT91SAM7S16 belongs to the SAM7S family of embedded processors, combining an ARM7 RISC architecture with serial interfaces and dedicated I/O. It is designed for compact control systems that need deterministic peripheral access without the resource demand of a higher-end application processor. The principal features of the AT91SAM7S16-MU include a maximum 55 MHz operating frequency, 16 KB of Flash for firmware, and 4 KB of SRAM for data and stack operations. Integrated connectivity includes I2C, SPI, SSC, and UART/USART interfaces. A 21-pin general-purpose I/O complement supports sensors, actuators, indicators, and local control logic, while brown-out detection provides system supervision during supply-voltage disturbances. The ARM7TDMI core supports a 16/32-bit instruction set and provides a practical balance of processing performance, memory efficiency, and peripheral integration. The SAM7S platform is suitable for control rather than graphics-intensive workloads: typical tasks include acquisition, protocol conversion, sequencing, motor or actuator control, and embedded supervisory functions. Its 48-QFN package supports compact board layouts but requires a PCB with fine-pitch routing and exposed-pad thermal management where appropriate. Typical uses include industrial automation modules, consumer control equipment, communications equipment, and compact embedded controllers. The I2C and SPI interfaces suit sensor and memory expansion, SSC supports synchronous serial data transfer, and UART/USART enables host or peripheral communication. The 21 available I/O lines make the MCU practical for controlling relays, indicators, switches, and discrete interface circuits. When designing around this device, plan the power rails and signal levels carefully because the core operates from 1.65 V to 1.95 V. Follow the pin-description and power-layout guidance in the Microchip SAM7S datasheet, place bypass capacitors close to the supply pins, and route high-current or sensitive signals away from switching nodes. Firmware and board compatibility should be validated before replacing a device with a different ARM core or memory configuration. This product page combines the manufacturer specification, package information, interface capabilities, and practical application guidance into an engineering-focused view of the AT91SAM7S16-MU. It also identifies candidate replacement devices and the key differences that must be checked before any board or firmware change is approved.

RFQ پەیوەندی
AT91SAM7S32-MU - 55MHz 32KB ARM7 MCU | Microchip
AT91SAM7S32-MU

AT91SAM7S32-MU - 55MHz 32KB ARM7 MCU | Microchip

The Microchip Technology AT91SAM7S32-MU is a 55 MHz, 32-bit ARM7-based flash microcontroller with 32 KB of internal flash, 8 KB of SRAM, and a 48-QFN 7 x 7 mm package. It belongs to the low-pin-count SAM7S family and combines an ARM7TDMI RISC core with integrated memory, serial interfaces, timers, and embedded debug support. A flash microcontroller is a compact embedded-computing device that executes its application program directly from internal nonvolatile memory. The SAM7S series occupies the low-pin-count microcontroller segment of the broader embedded processor and semiconductor hierarchy. Its mix of fast execution, integrated flash, SRAM, and peripheral interfaces makes it suitable for compact control systems that require more capability than a basic 8-bit or 16-bit controller. Three defining parameters are the 55 MHz maximum operating frequency, 32 KB of flash program memory, and 8 KB of SRAM. The device also supports 16-bit Thumb-based instruction processing within its 32-bit ARM architecture. Embedded ICE and Debug Communication Channel support provide a path for in-circuit debugging, while the manufacturer product page identifies the AT91SAM7S32 as part of the flash-based SAM7S series. The SAM7S32 architecture is intended for embedded control rather than high-volume data processing. Its ARM7TDMI processor executes from on-chip flash and uses SRAM for working data and stack storage. Peripheral integration reduces the number of external devices required in compact industrial, communications, and control products, although the exact peripheral mix and pin-level electrical limits should be confirmed in the manufacturer datasheet before layout or firmware development. Typical uses include industrial automation modules, serial gateways, embedded data-collection equipment, access-control units, and compact motor or instrument controllers. In these systems, the 55 MHz core supports responsive control logic while the integrated 32 KB flash stores application firmware. The 48-QFN package reduces board area, but its fine pitch requires careful PCB layout and inspection. When designing around the AT91SAM7S32-MU, check every power, ground, reset, clock, and debug connection against the manufacturer pin description before fabrication. Decoupling should follow the recommended capacitor values and placement in the datasheet. Firmware planning should also account for the limited 8 KB SRAM and use of the Debug Communication Channel or supported debug adapter. This product record consolidates the manufacturer's core specifications, exact package information, practical implementation guidance, and verified sourcing data. It also distinguishes true same-package alternatives from broader ARM microcontroller options, helping engineers assess replacement decisions without changing the PCB footprint.

RFQ پەیوەندی
AT91SAM7S64-MU - 55MHz ARM7 64-QFN Microcontroller
AT91SAM7S64-MU

AT91SAM7S64-MU - 55MHz ARM7 64-QFN Microcontroller

The Microchip AT91SAM7S64-MU is a 55 MHz, 32-bit ARM7TDMI flash microcontroller with 64 KB of internal flash memory, 16 KB of SRAM, and a 64-QFN 9 x 9 mm package. It combines a high-performance ARM7 RISC core with integrated USB device connectivity, debug support, and a broad set of embedded peripherals for compact control systems. A flash microcontroller is a microcontroller that stores its program code in nonvolatile internal flash rather than requiring an external memory device for every boot. The AT91SAM7S64 belongs to the SAM7S family, which combines the ARM7TDMI architecture with low-pin-count integration and cost-sensitive embedded control. Its position in the product hierarchy is ARM7 RISC processor, flash microcontroller, 32-bit microcontroller, integrated circuit, and semiconductor. Key characteristics include operation at a maximum 55 MHz, 64 KB of internal high-speed flash organized in pages, and 16 KB of SRAM for firmware working memory. The integrated USB device port supports connectivity to a personal computer or other USB host. Embedded ICE and Debug Communication Channel support assist in-circuit debugging, while the peripheral set supports control-oriented embedded-system designs. The ARM7TDMI core supports the 32-bit ARM instruction set and Thumb code, providing efficient execution within the constraints of a low-cost embedded design. Internal flash retains the firmware without external nonvolatile storage, and SRAM supports runtime data, stack, and buffer management. The 64-QFN package limits lead count compared with larger leaded packages, but its exposed thermal pad requires deliberate PCB layout for reliable heat transfer. Typical applications include USB-connected consumer peripherals, industrial automation controllers, data-acquisition equipment, and compact embedded-control products. The USB device interface is especially useful when a system needs a standard peripheral connection without adding a separate USB controller. The 55 MHz processor also supports responsive control loops and moderate protocol-processing workloads. For a new PCB, route the exposed pad to a ground or thermal structure according to the manufacturer datasheet and place decoupling capacitors close to the supply pins. For an existing board, verify the 64-QFN land pattern, pin functions, oscillator configuration, programming interface, and boot-strapping requirements before substitution. A same-footprint designation alone does not establish firmware or peripheral compatibility. This product overview combines the device architecture, package characteristics, interface capabilities, application guidance, and drop-in replacement constraints into one engineering-oriented reference. It also distinguishes documented electrical characteristics from parameters that still require confirmation from the manufacturer datasheet or an approved component-change review.

RFQ پەیوەندی
AT91SAM7X512B-AU - 512KB Flash ARM7 MCU w/ Ethernet | Microchip
AT91SAM7X512B-AU

AT91SAM7X512B-AU - 512KB Flash ARM7 MCU w/ Ethernet | Microchip

The Microchip AT91SAM7X512B-AU is a 32-bit ARM7TDMI-based flash microcontroller (MCU) running at 55 MHz with 512 KB of embedded Flash and 128 KB of SRAM, housed in a 100-pin LQFP (14x14 mm) package. It integrates a 10/100 Mbps Ethernet MAC, USB 2.0 Full-Speed device port, CAN 2.0A/B controller, and a rich set of serial peripherals including USART, SPI, TWI (I2C), and SSC for audio/I2S streams. The integrated Ethernet MAC embeds a static-MII-less PHY interface and a 16-bit host-side bus that simplifies TCP/IP offload via a hardwired MAC rather than a software stack.

RFQ پەیوەندی
AT91SAM7X512B-AUR - 512KB Flash ARM7 MCU 100-LQFP | Microchip
AT91SAM7X512B-AUR

AT91SAM7X512B-AUR - 512KB Flash ARM7 MCU 100-LQFP | Microchip

The Microchip AT91SAM7X512B-AUR is a 32-bit ARM7TDMI-based flash microcontroller integrating 512KB of program flash and 128KB of SRAM on-chip, operating at up to 55 MHz from a 1.65V–1.95V core / 3.0V–3.6V I/O supply, housed in a 100-pin LQFP (14x14 mm) package supplied on tape and reel. What is an ARM7-based flash microcontroller? An ARM7TDMI MCU is a 32-bit RISC processor with Thumb 16-bit compressed instruction support, integrating flash program memory, SRAM, peripherals, and often connectivity blocks such as Ethernet MAC and CAN on a single die. In the broader taxonomy it sits below ARM Cortex-M parts but above 8/16-bit 8051/AVR devices, occupying the industrial/embedded connectivity tier where deterministic 32-bit performance and integrated wired networking matter more than ultra-low power. Key features of the AT91SAM7X512B-AUR include an integrated 10/100 Ethernet MAC with MII/RMII interface, a CAN 2.0B controller, a USB 2.0 Full-Speed Device port, an 8-channel 10-bit ADC, four 16-bit timers, an 8-bit RTC, and a peripheral DMA controller that offloads data movement from the core. The embedded flash controller supports in-system programming and bootloader operation from USB or UART. Architecturally, the SAM7X512B uses a three-layer AHB bus matrix connecting the core, flash controller, peripheral DMA, and a bridge to APB peripherals, allowing parallel bus transactions that improve sustained throughput for Ethernet and USB traffic. The ARM7TDMI core's three-stage pipeline delivers roughly 0.9 MIPS/MHz, giving ~49 Dhrystone MIPS at 55 MHz. Typical applications include industrial gateways, building-automation controllers, point-of-sale terminals, CAN-based sensor nodes, and embedded Ethernet bridges. Integrated Ethernet plus CAN makes the part especially suitable for protocol-conversion bridges between factory-floor CAN networks and IP backhaul. When designing with the AT91SAM7X512B-AUR, verify the dual-rail supply (1.8V VDDCORE plus 3.3V VDDIO) and provide bulk decoupling near each power pin. Microchip designates the SAM7X family as not recommended for new designs (NRND); the AT91SAM7XC512B is the pin-compatible successor with optional AES/TDES crypto accelerators. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, including a v3.9-aligned alternatives list of same-brand and cross-brand drop-in options verified for package and pin compatibility.

RFQ پەیوەندی
AT91SAM9260B-CU - ARM926EJ-S MCU 180MHz 217-LFBGA | Microchip
AT91SAM9260B-CU

AT91SAM9260B-CU - ARM926EJ-S MCU 180MHz 217-LFBGA | Microchip

The Microchip Technology (formerly Atmel) AT91SAM9260B-CU is a SMART 32-bit ARM926EJ-S embedded microprocessor running at up to 180 MHz, packaged in a 217-ball LFBGA (15x15 mm). It integrates 32 KB of ROM, 8 KB of SRAM, and a 6-layer bus architecture that delivers up to six simultaneous 32-bit internal buses for parallel data movement. Key features include Full-Speed USB Host and Device ports, a 10/100 Ethernet MAC with RMII/MII interface, an image sensor interface (ISI), a MultiMedia Card Interface (MCI), I2S audio, three USARTs, two UARTs, SPI, TWI (I2C), Timer Counters, a Synchronous Serial Controller (SSC), and an ADC. The 6-layer matrix bus architecture provides high internal bandwidth, which makes the part suitable for multimedia, image-capture, and connected-embedded applications. The 'B' silicon revision improves upon the original AT91SAM9260 with errata fixes and refined peripheral behavior. The AT91SAM9260 family occupies the ARM9-based MPU segment of the Microchip SAM9 portfolio. As an ARM926EJ-S device with a memory management unit (MMU), it runs full operating systems such as Linux, WinCE, and MQX. Compared to Cortex-M microcontrollers, it offers higher compute throughput, richer connectivity peripherals, and OS support at the cost of higher power and a more complex toolchain. Typical applications include human-machine interfaces (HMIs), industrial control panels, image-capture and machine-vision front-ends, networked point-of-sale terminals, building automation gateways, and low-cost Ethernet/USB-connected embedded nodes where an MMU-capable SoC is required. When designing with this device, ensure the LFBGA-217 layout uses the manufacturer-recommended 8-layer PCB stack-up, a 12 MHz or similar main oscillator, and a regulated 1.8V core / 3.3V I/O supply pair to satisfy the SAM9260 power-domain requirements. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single decision-grade source.

RFQ پەیوەندی
AT91SAM9261-CJ - 190MHz ARM9 Microprocessor | Microchip
AT91SAM9261-CJ

AT91SAM9261-CJ - 190MHz ARM9 Microprocessor | Microchip

The Microchip Technology AT91SAM9261-CJ is a 32-bit, single-core ARM926EJ-S system-on-chip microprocessor operating at up to 190 MHz in a 217-LFBGA (15 x 15 mm) package. It reaches 210 MIPS at 190 MHz, includes 160 KB of configurable SRAM, and integrates extensive system peripherals for embedded control applications. An ARM-based microcontroller is a programmable semiconductor that combines a processor core, memory interfaces, communication controllers, timers, and other peripherals on one device. The AT91SAM9261 belongs to the ARM9 family of embedded processors, connecting the ARM926EJ-S compute core with external memory, graphics, industrial, and communications interfaces. Its 16 KB data cache, 16 KB instruction cache, and write buffer improve instruction and data throughput. The processor provides DSP instruction extensions and ARM Jazelle technology for Java acceleration. These features extend the ARM926EJ-S beyond conventional general-purpose control, enabling efficient handling of signal-processing and Java-oriented workloads. The 160 KB internal SRAM can be configured as tightly coupled memory, providing deterministic access for performance-sensitive code or data. A complete system-on-chip architecture places the ARM926EJ-S core, bus matrix, internal memories, boot logic, and a broad peripheral set in one package. The bus matrix manages access to internal and external memory and determines the boot-memory mapping according to the state of the BMS pin at reset. This integration reduces external component count and supports compact embedded platforms. Typical uses include industrial human-machine interfaces, networked embedded controllers, graphics-based terminals, data acquisition equipment, and connected control systems. The LCD controller and extensive peripheral set suit display-oriented designs, while external communications controllers can connect the processor to industrial networks or removable storage. Designers should account for the large 217-ball BGA footprint, high-speed memory routing, multilayer PCB requirements, and careful power, ground, and decoupling distribution. The processor's 190 MHz operating rate also requires signal-integrity checks on memory and external interface nets, particularly where board dimensions or edge rates limit routing flexibility. This page combines the manufacturer's core device characteristics with practical design guidance, pin-compatible-device information, application context, and a parameter comparison for engineers evaluating an AT91SAM9261-based design or considering a compatible SAM9-family migration path.

RFQ پەیوەندی
AT91SAM9G20B-CU - 400MHz ARM926 MPU, 217-LFBGA | Microchip
AT91SAM9G20B-CU

AT91SAM9G20B-CU - 400MHz ARM926 MPU, 217-LFBGA | Microchip

The Microchip AT91SAM9G20B-CU is a 400 MHz ARM926EJ-S embedded microprocessor (MPU) housed in a 217-ball LFBGA (15x15 mm) package, integrating fast ROM/RAM, a 10/100 Ethernet MAC, USB host/device interfaces with on-chip transceivers, and an image sensor interface. It belongs to the SAM9G family of smart ARM-based MPUs designed for connected embedded systems. The 'B' suffix designates the revision with the higher 400 MHz core clock versus the legacy 200/266 MHz SAM9G, while the 'CU' suffix denotes the 217-LFBGA industrial-grade package variant. An ARM926EJ-S microprocessor is a 32-bit RISC CPU core featuring the ARMv5TEJ instruction set with Jazelle Java acceleration, MMU, and DSP extensions, designed for embedded applications requiring full operating-system support such as Linux and Windows Embedded Compact. In the broader system hierarchy, the AT91SAM9G20 sits below application processors and above microcontrollers (MCUs), bridging the gap between deterministic MCU-class peripherals and rich-OS-capable CPUs. The 217-LFBGA package is part of the fine-pitch BGA surface-mount family requiring reflow soldering and X-ray or AOI inspection. Key features include an ARM926EJ-S core with 32 KB instruction cache and 32 KB data cache, 64 KB internal SRAM, 16 KB ROM containing the bootloader, and an external bus interface supporting DDR/LPDDR, NAND Flash, and SDRAM. Communication peripherals cover two USB 2.0 Full-Speed ports (host and device), a 10/100 Ethernet MAC with MII/RMII, an Image Sensor Interface (ISI), two SSC/SPI, four UART, two TWI (I2C), and a high-speed multimedia card interface (HSMCI). Operating voltage is 0.9-1.1 V core with 1.65-3.6 V I/O and memory. Typical applications include industrial HMI panels, point-of-sale terminals, barcode scanners, building automation gateways, portable medical data terminals, and Linux-based IoT edge nodes. The combination of Ethernet, dual USB, image sensor input, and DDR controller enables a true single-chip system design without an external bus-master companion. Compared to microcontrollers in the same generation, the AT91SAM9G20 provides full MMU support and Linux BSP availability from Microchip, simplifying migration from MCU-class designs when memory protection and complex OS features are required.

RFQ پەیوەندی
AT91SAM9G45-CU - 400MHz ARM9 Processor | Microchip
AT91SAM9G45-CU

AT91SAM9G45-CU - 400MHz ARM9 Processor | Microchip

The Microchip Technology AT91SAM9G45-CU is a 400 MHz, 32-bit ARM926EJ-S embedded microprocessor with one core, 64 KB SRAM, 64 KB ROM, and a 324-TFBGA package measuring 15 x 15 mm. The processor combines external-memory control with integrated connectivity for human-machine-interface, networking, storage, and multimedia systems. An embedded microprocessor is a system-level semiconductor that executes an operating system or real-time application while coordinating memory and peripheral interfaces. Within the product hierarchy, the AT91SAM9G45 belongs to the SAM9G family of ARM-based embedded MPUs, combining an ARM926EJ-S processor core with DDR2 and other memory controllers. This integration supports compact embedded platforms that need more connectivity than a general-purpose microcontroller normally provides. The device operates at 400 MHz and includes a single 32-bit ARM926EJ-S core. Its integrated memory controllers support LPDDR, LPSDR, DDR2, SDR, and SRAM, allowing system designers to select an external-memory configuration according to bandwidth, capacity, and cost requirements. The manufacturer lists 64 KB of internal SRAM and 64 KB of ROM, while the 324-TFBGA package provides a high pin count for parallel interfaces and external devices. Communications and multimedia features include a 10/100 Ethernet controller, high-speed USB, SDIO, an LCD controller, resistive-touchscreen support, a camera interface, and audio support. The datasheet describes multiple peripherals operating above 100 Mb/s, making the processor suitable for data-intensive embedded equipment requiring local connectivity and a graphical user interface. Typical systems include industrial human-machine interfaces, network-connected data acquisition equipment, digital controllers, multimedia terminals, and compact embedded gateways. The external DDR2 capability is particularly useful when working memory exceeds internal SRAM, while Ethernet, USB, and SDIO reduce the number of discrete interface devices required on the main board. A sound layout should treat the BGA power, clock, memory, and high-speed interfaces as separate constraint groups. Place decoupling capacitors close to the corresponding supply balls, route clocks with short controlled-impedance paths, and follow the manufacturer reference layout and stack-up requirements. Confirm ball assignments, voltage rails, memory topology, and boot configuration against the datasheet before fabrication. This product page combines the processor's core specifications, interface inventory, package information, application guidance, and drop-in alternatives. It also highlights design considerations for DDR2 memory, high-speed routing, power integrity, and software-controlled peripheral integration, providing engineering context beyond a basic distributor parameter list.

RFQ پەیوەندی
AT91SAM9R64-CU - 240MHz ARM9 MPU | Microchip Technology
AT91SAM9R64-CU

AT91SAM9R64-CU - 240MHz ARM9 MPU | Microchip Technology

The Microchip Technology AT91SAM9R64-CU is a 16/32-bit ARM9 microprocessor based on the ARM926EJ-S core, operating at 240 MHz in a 144-BGA (13 x 13 mm) surface-mount package. It integrates 32 KB of ROM, 72K x 8 bits of RAM, and a 1.65 V to 3.6 V supply range. The industrial-temperature option supports an ambient operating range of -40°C to 85°C. An ARM microprocessor is a system-level processing component that executes an operating system or embedded control application while coordinating memory and peripheral interfaces. The AT91SAM9R64 belongs to the SAM9R product family, combining an ARM926EJ-S processor core with integrated system memory and communication resources. In the device hierarchy, it is an embedded microprocessor rather than a small microcontroller, making it suitable for systems that require substantially more software capacity than a conventional 8-bit or 16-bit control device. The AT91SAM9R64-CU operates at 240 MHz and includes 32 KB of ROM for program storage. Its 72K x 8 RAM organization provides 72 Kbytes of internal SRAM, while the manufacturer documentation describes 64 Kbytes of high-speed SRAM divided into four 16-Kbyte blocks. These memories support boot code, operating-system data, graphical or communication buffers, and other working memory without requiring an immediate external memory device. Communication integration supports connected embedded systems. The product family provides interfaces including USB device, SDIO/SD/MMC, AC97, USART, SPI, I2S, and I2C connectivity, as well as an external bus interface. These interfaces allow the processor to operate as the central controller for human-machine interfaces, storage, audio, industrial communications, and networked peripherals while preserving a compact system design. Typical uses include industrial automation equipment, automotive electronic systems, consumer electronics, human-machine interfaces, data acquisition controllers, and embedded gateways. The 144-ball grid array offers a high pin count for external memory and parallel-interface connectivity, while its 13 x 13 mm body supports compact board layouts. The -40°C to 85°C industrial range makes the component suitable for temperature-controlled equipment rather than only consumer-room-temperature products. Designers should verify the complete pin assignment and power requirements against the manufacturer datasheet before PCB release. A 1.65 V to 3.6 V core range requires careful sequencing of supply rails and suitable decoupling. Because this is a fine-pitch BGA package, assembly process control, solder-paste volume, thermal profiles, and via-in-pad or fanout choices can materially affect yield and long-term reliability. This page consolidates manufacturer specifications, package and lifecycle information, sourcing guidance, application context, and engineering considerations into one technical reference. It also separates a confirmed drop-in replacement from broader functional alternatives, helping design teams distinguish PCB compatibility from general feature similarity before committing to a substitution.

RFQ پەیوەندی
AT97SC3204-U2A1A-10 - TPM 1.2 Crypto Controller | Microchip | 28-TSSOP
AT97SC3204-U2A1A-10

AT97SC3204-U2A1A-10 - TPM 1.2 Crypto Controller | Microchip | 28-TSSOP

The Microchip AT97SC3204-U2A1A-10 is an AVR-based CryptoController Trusted Platform Module (TPM) compliant with TCG (Trusted Computing Group) TPM 1.2 specifications, housed in a 28-pin TSSOP package (4.40 mm body width). It is a fully integrated hardware security module designed for embedded systems that need to perform RSA/SHA-1 cryptographic operations, secure key storage, platform attestation, and TWI (I²C-compliant) host communication. The device is part of Microchip's AT97SC3204 family and is rated for the industrial temperature range. A Trusted Platform Module (TPM) is a dedicated hardware security controller (a type of microcontroller + EEPROM security IC) that provides a tamper-resistant root of trust for computing platforms. In the broader taxonomy it sits under security IC -> authentication IC -> application-specific microcontroller, and ultimately under semiconductor. TPMs perform RSA encryption/decryption, SHA-1 hashing, random number generation, and sealed key binding/unbinding, all while keeping private keys inside a hardware boundary that resists software-level extraction. Key features include a hardware RNG (FIPS 140-2 compliant random number generator), an integrated Atmel AVR core for command processing, on-chip non-volatile EEPROM key storage, and a TWI/I²C host interface. The device operates from a 3.3 V supply, supports I²C at standard and fast-mode rates, and provides Endorsement Key (EK) pre-provisioning under the suffix -10 (signed EK). The 28-TSSOP footprint and standard TPM pinout allow drop-in replacement on compliant mainboard headers. The architecture combines an 8-bit AVR MCU, a crypto-acceleration block for RSA-1024/2048 and SHA-1, secure EEPROM for persistent keys, and a TWI slave controller. This partitioning keeps the host CPU free of cryptographic computation and keeps private keys bound to hardware for the platform's lifetime. Typical applications include commercial desktop and notebook PCs, server motherboards, embedded industrial controllers requiring secure boot, network equipment needing platform attestation, and any TCG-compliant system that requires hardware-bound credential storage. The TWI interface integrates with standard I²C controllers on most SBCs and SoCs. Designers should ensure the LPC (Low Pin Count) interface is correctly wired to the host chipset's TPM header and that the firmware stack (BIOS/UEFI TCG driver) is enabled in BIOS. The EK variant (-10) is signed and ready for attestation flows; the EK-less variant is suitable for non-attestation use cases. This page combines distributor pricing snapshots, drop-in alternative analysis, and design notes not included in the manufacturer datasheet addendum, providing engineering perspective beyond raw specifications.

RFQ پەیوەندی
ATMEGA103-6AC - 8-Bit AVR MCU, 6MHz, 128KB Flash | Microchip
ATMEGA103-6AC

ATMEGA103-6AC - 8-Bit AVR MCU, 6MHz, 128KB Flash | Microchip

The Microchip Technology ATMEGA103-6AC is an 8-bit AVR enhanced RISC microcontroller with 128KB of In-System Programmable Flash (64K x 16), operating at up to 6 MHz from a 5V supply, housed in a 64-pin TQFP (14 x 14 mm) package. A microcontroller is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals such as timers, UART, and analog-to-digital converters onto one die. In the embedded systems hierarchy, the AVR ATmega family sits within the broader class of 8-bit microcontrollers, competing with architectures such as Microchip PIC, 8051, and Freescale HC08. The AVR architecture uses a Harvard structure with most instructions executing in a single clock cycle, giving high code efficiency and MIPS-per-MHz. Key features of the ATMEGA103-6AC include 121 powerful instructions (most single-cycle), 128KB of In-System Reprogrammable Flash, 4KB of internal SRAM, and 4KB of EEPROM for non-volatile data storage. The 6 MHz speed grade with a 5V supply targets cost-sensitive commercial-temperature applications where maximum performance is not required. The large 128KB Flash makes it suitable for firmware-heavy applications such as protocol stacks and menu-driven HMI code. Technically, the ATmega103 uses an AVR enhanced RISC core with 32 general-purpose working registers directly connected to the ALU, allowing two independent registers to be accessed in one instruction executed in one clock cycle. This delivers throughput approaching 1 MIPS per MHz. Peripherals typically include an 8-channel 10-bit ADC, multiple timer/counters with PWM, UART for serial communication, and SPI for synchronous serial interfacing. Typical applications include industrial control panels, building automation nodes, battery-backed instrumentation, and legacy embedded products whose firmware was designed around the ATmega103 memory map and pinout. Design consideration: the 5V-only supply and 6 MHz limit mean new designs should normally select the pin-compatible ATmega128 family, which runs to 16 MHz with richer peripherals while sharing the 64-TQFP footprint. This page synthesizes distributor pricing, verified drop-in alternatives such as the ATmega128 series, and practical sourcing notes not found in the manufacturer datasheet.

RFQ پەیوەندی
ATMEGA103-6AI - 8-Bit AVR MCU, 6MHz, 128KB Flash | Microchip
ATMEGA103-6AI

ATMEGA103-6AI - 8-Bit AVR MCU, 6MHz, 128KB Flash | Microchip

The Microchip Technology ATMEGA103-6AI (originally Atmel) is an 8-bit AVR enhanced RISC microcontroller delivering 6 MHz maximum clock speed, 128 KB of in-system programmable Flash (64K x 16 organization), and 4 KB SRAM plus 4 KB EEPROM, housed in a 64-pin TQFP (14x14 mm) package operating from a 5V supply. An AVR microcontroller is a class of 8-bit Harvard-architecture MCUs in which program memory and data memory occupy separate address spaces, allowing most instructions to execute in a single clock cycle. Within the power-management hierarchy, the ATmega103 sits in the high-memory general-purpose microcontroller tier, sitting above the ATmega603 (64 KB Flash) sibling and pre-dating the pin-compatible ATmega128. Key features include the AVR enhanced RISC core with 121 powerful instructions (most single-cycle), 128 KB in-system reprogrammable Flash, 4 KB internal SRAM, 4 KB EEPROM, an 8-channel 10-bit ADC, UART, SPI, and a wide -40C to +85C industrial operating temperature range denoted by the 'I' suffix in the part number. The 6 MHz speed grade ('6') covers 5V operation. Architecturally, the ATmega103 uses a low-power CMOS process with a fast-access RISC register file of 32 general-purpose 8-bit registers directly connected to the ALU, enabling single-cycle execution that yields throughput of roughly 6 MIPS at 6 MHz. Nonvolatile memory is organized for in-system reprogramming via SPI, and the memory map includes external memory expansion capability. Typical applications include legacy industrial control systems, building automation controllers, instrumentation, and embedded products designed in the late 1990s and early 2000s that still require AVR compatibility at the 128 KB memory point. Design consideration: because this is a 5V-only part with a 6 MHz ceiling, new designs should evaluate the pin-compatible, higher-performance ATmega128 family instead; ATmega103-mode compatibility is retained in the ATmega128 via an M103C fuse. This page consolidates distributor pricing, drop-in alternative cross-references, and practical migration design notes not found together on the manufacturer datasheet.

RFQ پەیوەندی
ATMEGA103L-4AC - 8-Bit AVR MCU 4MHz 128KB TQFP-64 | Microchip
ATMEGA103L-4AC

ATMEGA103L-4AC - 8-Bit AVR MCU 4MHz 128KB TQFP-64 | Microchip

The Microchip Technology (Atmel) ATMEGA103L-4AC is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture, delivering up to 4 MHz operation at 2.7 V to 5.5 V with 128 KB of in-system programmable Flash, 4 KB of SRAM, and 64 KB of optional external memory addressing, housed in a 64-pin TQFP (14x14 mm) package. An 8-bit AVR microcontroller is a single-chip processor that executes most instructions in a single clock cycle using a Harvard-architecture RISC core with 32 general-purpose working registers. Within the system hierarchy, the MCU sits at the heart of an embedded system: flash memory stores program code, SRAM holds runtime variables, and integrated peripherals (UARTs, SPI, timers) interface with sensors and actuators, making a discrete CPU-plus-peripherals chipset unnecessary. Key features of the ATMEGA103L-4AC include 128 KB (64K x 16) of In-System Programmable (ISP) Flash, dual USARTs for serial communication, an SPI serial interface, two 8-bit and two 16-bit timers/counters with PWM outputs, and an 8-channel external interrupt capability. The AVR core's single-cycle instruction execution yields up to 4 MIPS at the 4 MHz maximum clock rating of this L-suffix (2.7 V to 5.5 V) commercial-grade device. Architecturally, the ATmega103 separates instruction and data buses, allowing fast register-to-register operations and efficient C-code compilation. External memory expansion (up to 64 KB) is supported through the multiplexed address/data bus on Ports A and C with WR/RD strobes on Port G, enabling designs requiring large data buffers. Typical applications include legacy industrial control panels, battery-powered instruments, building automation nodes, and embedded systems where the 4 MHz low-voltage rating supports long-battery-life or noise-limited 3.3 V designs. Design consideration: this part is end-of-life per distributor status data, so new designs should target the ATmega128 family, and existing boards should secure remaining stock or qualify a drop-in variant before replenishment runs out. This page adds value beyond the manufacturer datasheet by consolidating drop-in alternatives, lifecycle status, pricing context, and practical design notes in one engineer-facing reference.

RFQ پەیوەندی
ATMEGA103L-4AI - 8-Bit AVR MCU 128KB 4MHz TQFP-64 | Microchip
ATMEGA103L-4AI

ATMEGA103L-4AI - 8-Bit AVR MCU 128KB 4MHz TQFP-64 | Microchip

The Microchip Technology ATMEGA103L-4AI is an 8-bit AVR enhanced RISC microcontroller executing up to 4 MHz with 128KB (64K x 16) of in-system programmable FLASH and 4KB of SRAM, housed in a 64-pin TQFP (14x14 mm) package for industrial temperature ranges. An 8-bit AVR microcontroller is a single-chip processor built on the AVR enhanced RISC architecture, in which most of its powerful instructions execute in a single clock cycle. In the embedded-systems hierarchy it sits as the central processing element of a board, above discrete logic and below 32-bit application processors, and belongs to the broader family of microcontroller units (MCUs) that integrate program memory, data memory, timers, and communication peripherals on one die. Key features of the ATMEGA103L-4AI include 121 powerful instructions with mostly single-clock-cycle execution, 128K bytes of in-system reprogrammable FLASH program memory, and serial programming interfaces. The L suffix denotes the low-voltage variant, while the AI suffix denotes the industrial temperature grade supplied in the 64-lead thin quad flat package (TQFP-64). Architecturally, the device uses a Harvard-structure AVR core with separate program and data buses, allowing one instruction to be fetched while another is decoded and executed, which sustains throughput approaching 1 MIPS per MHz of clock. On-chip peripherals include an 8-channel 10-bit ADC, two 8-bit and two 16-bit timers with PWM, an SPI serial port, and a UART, providing complete system control in a single chip. Typical applications include legacy industrial control boards, instrument front panels, building automation nodes, and communication equipment controllers. The low-voltage operation suits 3.3V systems, while the industrial temperature range supports factory-floor environments where consumer-grade parts cannot survive. A key design consideration is that this part is mature/obsolete for new designs; engineers starting new boards should evaluate the pin-compatible ATmega128 family, which offers an ATmega103 compatibility mode and higher clock speeds. Verify FLASH endurance and programming-tool support before committing to new production. This page synthesizes distributor availability data, drop-in alternative analysis, and practical design notes not found in the manufacturer datasheet, with pricing referenced as of 2026-09-15.

RFQ پەیوەندی
ATMEGA128-16AC - 8-bit AVR MCU 16MHz 128KB Flash | Microchip
ATMEGA128-16AC

ATMEGA128-16AC - 8-bit AVR MCU 16MHz 128KB Flash | Microchip

The Microchip Technology ATMEGA128-16AC is a low-power 8-bit AVR microcontroller with 128KB in-system programmable Flash, 16MHz maximum clock frequency, and 4KB SRAM, housed in a 64-pin TQFP (14x14 mm) package. An 8-bit microcontroller is an integrated circuit that contains a processor core, memory, and programmable input/output peripherals on a single chip, executing control and data-processing tasks in embedded systems. Within the product hierarchy, the ATmega128 sits in the AVR ATmega family of enhanced RISC MCUs, which belongs to the broader class of general-purpose microcontrollers within semiconductor-based embedded processing. The AVR architecture executes most instructions in a single clock cycle, achieving throughput approaching 1 MIPS per MHz. Key features of the ATMEGA128-16AC include 133 powerful AVR instructions with mostly single-cycle execution, 32 general-purpose working registers, 128KB of ISP Flash with 10,000 write-cycle endurance, 4KB EEPROM rated for 100,000 write cycles, and a rich peripheral set: two 8-bit and two 16-bit timers with PWM, two USARTs, SPI, TWI (I2C-compatible), an 8-channel 10-bit ADC, analog comparator, watchdog timer, and JTAG boundary-scan/on-chip-debug support. Architecturally, the AVR uses a Harvard structure with separate program and data buses, allowing simultaneous Flash instruction fetch and data access. In-system programmability permits firmware updates after board assembly, and the boot Flash section supports self-programming for field upgrades. Typical applications include industrial control and automation nodes, embedded instrumentation and test equipment, motor-control and power-supervision systems, and legacy embedded designs requiring extended 128KB program memory with 5V-tolerant I/O. When designing with this part, remember the -16AC is the commercial temperature grade (0C to +70C); select the -16AI industrial grade for -40C to +85C environments, and budget for a 4.5V to 5.5V supply since 16MHz operation is not supported at 3.3V. This page synthesizes distributor pricing, drop-in alternatives, complete 64-pin pinout data, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی