بەرهەمەکان (730+)

SI8751AB-IS - 2.5kV Isolated FET Driver, CMOS Input | Skyworks
SI8751AB-IS

SI8751AB-IS - 2.5kV Isolated FET Driver, CMOS Input | Skyworks

The Skyworks SI8751AB-IS is a 2.5 kVrms isolated FET driver with CMOS digital input designed for solid-state relay (SSR) and electromechanical relay (EMR) replacement in an 8-pin SOIC narrow-body package. The device integrates Skyworks' robust CMOS capacitive-isolation technology with an internal self-powered FET gate driver, eliminating the need for an external isolated dc-dc supply on the secondary side. Output drive is nominally 10 V and is generated entirely from the energy injected through the input-side pins. An isolated gate driver, also called a digital isolator with FET driver, is a category of semiconductor that combines galvanic isolation with high-side/low-side gate-drive capability for power MOSFETs, IGBTs, or external SSR FETs. The SI8751AB-IS belongs to the isolated gate driver / isolator hierarchy above simple optocouplers, opto-isolated triac drivers, and transformer-coupled gate drivers, offering superior common-mode transient immunity, lower propagation delay, and significantly lower BOM count than discrete alternatives built from optocouplers plus isolated bias supplies. Key features include an input-side supply range of 2.25 V to 5.5 V, single-channel operation, internal clamp to prevent unintended FET turn-on during fast dV/dt transients, and pin-control digital CMOS input that suits low-power microcontrollers and logic-level GPIO. The 8-SOIC package provides 2.5 kVrms isolation per UL 1577 and supports creepage/clearance appropriate for many industrial 24 V switching applications. Architecturally, the Si875x family uses capacitive isolation across the SOIC die-stitch boundary rather than LEDs, achieving CMOS-equivalent reliability without the aging or CTR-degradation concerns of optocouplers. Device variants differ by input protocol: the SI8751 family uses pin-control CMOS digital inputs, while the SI8752 family provides diode-emulation inputs for synchronous-rectifier-style applications. Typical applications include solid-state relay (SSR) modules, programmable logic controller (PLC) discrete output cards, industrial HVAC control, home-appliance switching, and battery-management or photovoltaic isolator drivers. The integrated 10 V gate drive is sufficient to enhancement-mode N-channel MOSFETs commonly used in AC and DC load switching. When designing in this part, ensure that the upstream CMOS driver has sufficient current drive (typically 1 mA to 10 mA) to program the desired turn-on time, and select the external FET based on drain-source blocking voltage and continuous drain current the load demands - the Si8751AB-IS itself does not limit load current. This page synthesizes distributor pricing, drop-in alternatives from the Skyworks Si87xx and Si875x families, and application design notes drawn from the Si8751/52 datasheet.

RFQ پەیوەندی
SI8751AB-ISR - Isolated FET Driver, 2.5kV, 8-SOIC | Skyworks
SI8751AB-ISR

SI8751AB-ISR - Isolated FET Driver, 2.5kV, 8-SOIC | Skyworks

The Skyworks Solutions (formerly Silicon Labs) SI8751AB-ISR is an isolated FET driver that combines a CMOS input stage with capacitive (RF) isolation technology and an integrated gate-driver output stage in an 8-pin SOIC package. The Si875x family integrates 2.5 kVrms isolation with a self-contained, floating secondary-side gate-drive output that does not require a separate isolated DC supply. The Si8751 variant offers a digital CMOS pin-control input, allowing the application to program turn-on drive strength and therefore trade off quiescent power for switching speed. An isolated FET driver is a specialized gate-driver IC whose primary purpose is to drive the gate of an external power MOSFET or IGBT while maintaining galvanic isolation between the low-voltage control side and the high-voltage power stage. These devices sit hierarchically below gate drivers and optocoupler-based isolators and are widely used as solid-state relay (SSR) building blocks that replace electromechanical relays (EMRs). Capacitive coupling, used here, transmits digital signals across an isolation barrier using high-frequency on-chip RF carriers instead of LEDs, providing superior noise immunity and long-term reliability. Key features include 2.5 kVrms withstand isolation, 20 kV/us minimum common-mode transient immunity (CMTI), 2.25 V to 5.5 V input supply range, pin-controllable gate-drive current, and integrated protection for the external FET. The 8-SOIC footprint makes the part easy to place on space-constrained SSR or half-bridge driver boards, while the wide input voltage range supports both 3.3 V and 5 V CMOS logic interfaces without level shifters. Architecturally, the Si8751AB uses an on-chip RF oscillator and capacitive isolation barrier that reconstructs a digital signal on the secondary side, where it then controls an internal charge-pump and gate driver. Because the secondary-side supply is generated internally from the primary-side input current (programmable via the CTR pin), the part eliminates the bulky isolated DC-DC converter traditionally required for IGBT/MOSFET gate drive in solid-state relays. Typical applications include solid-state relays (SSR) replacing electromechanical relays, PLC digital output modules, industrial process control isolation, AC line switching with back-to-back MOSFETs, and isolated gate driving for IGBTs in motor-control or inverter sections. Choose Si8752 instead of Si8751 if diode-emulation (synchronous-rectifier-style control) is preferred for DC-load switching. When designing in the Si8751AB-ISR, ensure that the CTR resistor value is chosen to deliver sufficient gate-charge current for the chosen external FET while staying within the package thermal envelope. The IC tolerates 2.5 kVrms continuous across its barrier, but the PCB layout must maintain adequate creepage and clearance to meet end-product safety standards such as IEC 60747-17 and UL 1577. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
SI9978DW - H-Bridge MOSFET Gate Driver | Vishay | 24-SOIC
SI9978DW

SI9978DW - H-Bridge MOSFET Gate Driver | Vishay | 24-SOIC

The Vishay Siliconix SI9978DW is an integrated H-bridge gate driver for n-channel MOSFETs, configured for full H-bridge or dual independent half-bridge operation in a 24-pin SOIC wide-body package. The device combines a configurable mode-control input with a DIR/PWM interface that supports both sign/magnitude and anti-phase PWM drive schemes, providing flexibility for brushed DC motor, BLDC, and solenoid control topologies. Operating from a typical supply range suitable for industrial 12 V and 24 V rails, the Si9978 is a non-inverting half-bridge driver with built-in dead-time control and shoot-through protection. What is a H-bridge gate driver? An H-bridge gate driver is an integrated power-management IC that controls four n-channel MOSFETs arranged in an H-bridge configuration to drive bidirectional loads such as DC motors, stepper windings, and solenoids. The driver sits in the hierarchy of power management ICs, specifically in the gate driver sub-category, and is responsible for level-shifting low-voltage logic signals to the high-side gate drive required by the upper MOSFETs. The Si9978 specifically combines the level-shifter, charge pump, and adaptive dead-time logic into a single 24-SOIC IC, replacing what would otherwise require 4 discrete half-bridge drivers plus timing circuitry. Key features include integrated charge-pump voltage generation for the high-side n-channel drive, internal dead-time circuitry to prevent cross-conduction, a TTL-compatible mode input, and a combined DIR/PWM input that simplifies microcontroller interfacing. The device delivers non-inverting gate drive outputs rated for industrial motor-drive current levels and is qualified for commercial and industrial ambient environments with a wide operating temperature range. Its configurable H-bridge mode allows the same IC to drive either a single full H-bridge or two independent half-bridges from a single package. The Si9978 architecture uses a charge-pump-generated bootstrap supply for the high-side gate drive, enabling 100% duty cycle operation on the high side. Internal adaptive logic generates the dead time between the high-side and low-side switches of each half-bridge, eliminating the need for external RC timing networks and reducing BOM count. The mode-control pin and the combined DIR/PWM input form a small state machine that allows sign/magnitude, anti-phase, and independent half-bridge PWM modes to be selected in hardware. Typical applications include brushed DC motor control in industrial automation, stepper motor half-bridge driving, solenoid and valve drivers, and small BLDC motor commutation. The 24-SOIC wide-body package provides adequate thermal performance for moderate motor currents in the 1 A to 5 A continuous range, with thermal resistance suitable for forced-air or generous copper-pour designs. Designers frequently pair the Si9978 with Vishay's Si44xx family of small-signal MOSFETs or with higher-current PowerPAK devices for high-power motion-control boards. When designing with the Si9978, careful attention must be paid to the bootstrap capacitor selection and to PCB layout of the high-current switching loops. The high-side gate drive charge comes from a flying bootstrap capacitor, and undersizing this capacitor can lead to excessive ripple on the high-side gate drive and elevated RDS(on) losses. Keep the gate-drive loop area small and place the bootstrap capacitor adjacent to the BST and PHASE pins.

RFQ پەیوەندی
SM74104 - 1.8A, 100V Half-Bridge Gate Driver | Texas Instruments
SM74104

SM74104 - 1.8A, 100V Half-Bridge Gate Driver | Texas Instruments

The Texas Instruments SM74104 is a high-voltage half-bridge gate driver designed to drive both high-side and low-side N-Channel MOSFETs in a synchronous buck configuration. It delivers 1.8-A peak output current and operates with supply voltages up to 100V, making it suitable for a wide range of power conversion applications. The device features an 8-V undervoltage lockout (UVLO) and adaptive delay to optimize switching performance and reduce dead-time losses. A half-bridge gate driver is a specialized integrated circuit that provides the necessary voltage and current to switch power MOSFETs or IGBTs in a half-bridge topology. It typically includes a floating high-side driver that can operate with a bootstrap supply, allowing the high-side MOSFET to be driven above the ground reference. This category of components is essential in synchronous buck converters, full-bridge converters, and motor drive circuits, where efficient and reliable switching is critical. Key features of the SM74104 include a 1.8-A peak source and sink current, a wide input voltage range up to 100V, and an 8-V UVLO threshold that ensures proper operation during power-up. The adaptive delay feature automatically adjusts the dead-time between high-side and low-side switching, minimizing shoot-through current and improving efficiency. The device also offers a floating high-side driver with a bootstrap supply, enabling high-side MOSFET driving without an external isolated supply. Technically, the SM74104 uses a level-shifting architecture to transfer the high-side gate signal across the voltage domain, with a bootstrap capacitor providing the necessary gate drive voltage. The adaptive delay circuit monitors the gate voltage and adjusts the turn-on delay to prevent cross-conduction, which is critical for reliable operation at high frequencies. The device is available in a small 8-pin SOIC package, making it easy to integrate into compact power designs. Typical applications include synchronous buck converters for telecom and networking equipment, industrial power supplies, and motor control circuits. The SM74104 is particularly well-suited for applications where a single PWM control signal is available, as it simplifies the drive circuitry for both high-side and low-side MOSFETs. Its high-voltage capability and adaptive delay make it a robust choice for demanding power conversion environments. When designing with the SM74104, ensure that the bootstrap capacitor is properly sized and that the UVLO threshold is considered for the input supply. The adaptive delay feature reduces the need for external dead-time circuitry, but the PCB layout should minimize parasitic inductance in the gate drive loop to achieve optimal performance.

RFQ پەیوەندی
SN6505BDBVR - 1A Low-Noise 420kHz Transformer Driver | TI
SN6505BDBVR

SN6505BDBVR - 1A Low-Noise 420kHz Transformer Driver | TI

The Texas Instruments SN6505BDBVR is a low-noise, low-EMI push-pull transformer driver IC housed in a 6-pin SOT-23 (DBV) package, designed for small form factor isolated power supplies. It operates from a 2.25V to 5.5V input supply and delivers up to 1A of high-side/low-side drive current at the 5V rail, with an internal MOSFET RON of just 0.25 ohm maximum at 4.5V supply to minimize conduction losses and transformer heating. A transformer driver is a specialized PMIC that excites a small center-tapped primary transformer at a defined switching frequency, allowing the secondary-side rectifier + LDO to generate an isolated rail. Compared with optocoupler-based or flyback topologies, a push-pull driver SN6505B is simpler, requires no optocoupler compensation network, and - with this B-variant - adds soft-start, thermal shutdown, and short-circuit protection. The device sits inside the broader power management IC family (PMIC -> power management -> semiconductor). Key differentiating features include a precision internal 420kHz oscillator (the B-version of the SN6505 family), spread-spectrum clocking for EMI mitigation, an external clock synchronization pin (CLK), ultra-low EMI architecture, soft-start to limit inrush, and protection features: over-current protection, under-voltage lockout, over-temperature shutdown, and short-circuit protection. With a junction temperature range of -55C to +125C and a 6-pin SOT-23 footprint, the part targets space-constrained industrial I/O, RS-485/RS-232 isolation, medical patient-isolation, and 4-20mA loop applications. Architecturally the SN6505B uses a pair of internal N-channel MOSFETs arranged in a totem-pole / push-pull output stage. Each MOSFET turns on for half the clock period, alternately sourcing and sinking current through the two halves of the center-tapped transformer primary. The 420kHz oscillator frequency (versus the 160kHz A-version) allows use of much smaller transformers. Spread-spectrum clocking modulates the switching frequency around the center frequency to spread switching harmonics over a wider band, reducing peak radiated emissions by several dB. Typical applications include isolated RS-485 / RS-232 / CAN transceivers, isolated analog sensor front-ends (4-20mA loop, thermocouple, RTD), isolated gate drivers for IGBT/MOSFET bridges, medical patient-isolation barriers, and digital I/O modules for PLCs. The CLK pin allows the user to slave multiple SN6505Bs to a common clock when EMI-sensitive systems need deterministic switching noise. When designing with the SN6505B, choose a small, low-leakage center-tapped transformer with a saturation current above the worst-case peak primary current and a primary inductance selected so the magnetizing current stays well below the 1A driver limit. Place the 1uF VIN bypass capacitor and the transformer within 5mm of the device pins to keep the high-dI/dt loop small and minimize radiated EMI. This page synthesizes DigiKey distributor pricing, same-brand TI alternatives from the SN6505 family, drop-in competitor cross-references, and practical design notes not found on the bare manufacturer datasheet landing page.

RFQ پەیوەندی
STA505 - 40V 3.5A Quad Half-Bridge Amplifier | STMicroelectronics
STA505

STA505 - 40V 3.5A Quad Half-Bridge Amplifier | STMicroelectronics

The STMicroelectronics STA505 is a 40 V, 3.5 A quad power half-bridge stage in a PowerSO-36 package, intended for Class D audio amplification in mono, stereo, or reconfigured bridge arrangements. It integrates four complementary power half-bridges, configurable operating modes, CMOS-compatible logic inputs, thermal protection, and output overvoltage and undervoltage detection. An audio power half-bridge is one section of a switching amplifier that uses complementary power transistors to drive a load in one current direction. A quad half-bridge can provide two stereo channels, four independent modulation outputs, or another bridge configuration selected by the CONFIG pin. The STA505 is therefore positioned between discrete power-stage design and a complete integrated audio amplifier. Key verified characteristics include a 40 V power-stage rating, a 3.5 A half-bridge current capability, BCDMOS technology, and PowerSO-36 packaging. The device can be used as a dual bridge or reconfigured by connecting CONFIG to VDD for a single-bridge configuration with double current capability. Its binary half-bridge mode is also identified in the manufacturer datasheet. The STA505 is suitable for high-power Class D audio systems, including stereo speaker drives, mono subwoofer amplifiers, compact hi-fi equipment, and external amplifier modules. Compared with a discrete MOSFET output stage, the monolithic quad half-bridge reduces board-level integration effort while retaining configurable drive modes and integrated protection functions. Designers should verify the exact input, output, power, and protection limits in the STMicroelectronics datasheet before layout and power-supply selection. The PowerSO-36 package requires careful thermal planning, low-impedance supply routing, and output-filter design appropriate to the target speaker impedance and switching frequency. This page consolidates the verified manufacturer and distributor information for the STA505, including configuration guidance, application context, and practical design considerations for evaluating the quad half-bridge stage.

RFQ پەیوەندی
STCMB1 - TM PFC + LLC Combo Controller 800V | STMicro
STCMB1

STCMB1 - TM PFC + LLC Combo Controller 800V | STMicro

The STMicroelectronics STCMB1 is a combination transition-mode (TM) Power Factor Correction (PFC) controller and high-voltage double-ended LLC resonant half-bridge controller integrated in a single chip, supplied in a 20-pin SO (SO20W) package. According to the manufacturer datasheet, the device targets SMPS adapters and open-frame power supplies with universal-mains input and high-voltage DC output, where it implements both the front-end PFC pre-regulator and the downstream resonant converter with a glue-logic supervisor in one IC. A TM PFC controller (transition-mode PFC, also known as critical-conduction-mode PFC) is a power-factor-correction topology that forces the boost inductor current to reach zero before each switching cycle is re-triggered. Compared with continuous-conduction-mode (CCM) PFC, it reduces switching losses and enables the use of smaller magnetics, making it popular in adapters up to a few hundred watts. An LLC resonant half-bridge is a soft-switching DC-DC topology that achieves zero-voltage switching on the primary FETs and zero-current switching on the secondary rectifiers, delivering high efficiency at high switching frequency with low EMI. The STCMB1 combines both stages plus 800 V start-up and X-cap discharge, removing the need for a separate standby controller. Key features of the STCMB1 include 800 V high-voltage start-up with integrated input voltage sensing, active X-cap discharge circuitry (IEC 62368-1 and UL Demko certified) for reduced standby power, a switching frequency of approximately 500 kHz for the LLC stage, independent debug mode for both PFC and LLC, and an internal 2.5 V transconductance reference. The 800 V high-voltage section supports universal mains (90-265 V AC) and over-voltage transients without an external depletion-mode MOSFET or auxiliary winding, simplifying the front-end biasing. The X-cap discharge block eliminates the bleeder resistors traditionally required to meet safety standards for input capacitor discharge time after AC removal. The regulation loop uses a transconductance amplifier with an internal 2.5 V reference and a typical gain-bandwidth product of 1 MHz, providing the PFC output voltage regulation and LLC output voltage regulation with two external compensation networks. The glue logic coordinates soft-start, brown-in/brown-out, fault handling, and burst-mode entry across the two stages, so designers do not need to interlock two separate controllers manually. Wide-bandgap compatibility (GaN and super-junction silicon) is supported through the high-side driver output structure. Typical applications of the STCMB1 include 90 W to 300 W USB-PD adapters, laptop power supplies, LED TV power boards, all-in-one PC supplies, and any high-density AC-DC converter where efficiency above 90 percent, low standby power (below 75 mW via X-cap discharge), and reduced BOM count are design priorities. The 20-pin SO wide-body (SO20W) package provides sufficient creepage for primary-side high-voltage pins and adequate thermal performance for adapters operated in enclosed plastic housings. When designing with this IC, layout the PFC inductor and the LLC resonant tank so that their high-current loops do not share a common ground return with the small-signal analog ground of the TM PFC E/A. Designers should also ensure the X-cap discharge path is intact for IEC 62368-1 compliance and place the bootstrap diode close to the high-side driver pin to avoid shoot-through during LLC start-up transients. This page synthesizes distributor stock signals, pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a consolidated technical reference for SMPS adapter development.

RFQ پەیوەندی
STGAP1BS - 4A Galvanically Isolated Single Gate Driver | STMicroelectronics
STGAP1BS

STGAP1BS - 4A Galvanically Isolated Single Gate Driver | STMicroelectronics

The STGAP1BS is a galvanically isolated single gate driver from STMicroelectronics, designed to drive high-power IGBTs and SiC MOSFETs in industrial and automotive applications. It provides a 4A sink/source peak output current and features a 4 kV galvanic isolation barrier, making it suitable for motor drives, power supplies, and renewable energy inverters. The device is available in a wide-body SO-8W package, which offers a compact footprint while maintaining high isolation voltage. A gate driver is a power amplifier that accepts a low-power input from a controller IC and produces a high-current drive output to control the gate of a power transistor. In the hierarchy of power electronics, a gate driver sits between the control stage (microcontroller or DSP) and the power stage (IGBT or MOSFET), ensuring fast and reliable switching. The STGAP1BS integrates a galvanic isolation barrier, which separates the input and output grounds, protecting the low-voltage control circuitry from high-voltage transients and ground loops. Key features of the STGAP1BS include a 4A peak output current, 4 kV galvanic isolation, 100 V/ns common-mode transient immunity (CMTI), and a wide supply voltage range from 4.5V to 18V on the output side. The device also features a Miller clamp function to prevent spurious turn-on during high dv/dt events, and a desaturation protection input for overcurrent detection. These features make it ideal for driving SiC MOSFETs and IGBTs in high-frequency, high-efficiency power converters. The STGAP1BS uses STMicroelectronics' proprietary galvanic isolation technology, which provides robust isolation with low propagation delay (typically 75 ns) and tight part-to-part matching. The device supports both bipolar and unipolar supply configurations, allowing flexible design for various gate drive requirements. The wide-body SO-8W package ensures adequate creepage and clearance distances for 4 kV isolation, meeting IEC 60747-17 requirements. Typical applications include motor drives for industrial automation, solar inverters, uninterruptible power supplies (UPS), and electric vehicle (EV) charging stations. The STGAP1BS is also suitable for welding equipment and induction heating systems, where high reliability and fast switching are critical. When designing with the STGAP1BS, ensure proper PCB layout to minimize parasitic inductance in the gate drive loop. Use a low-ESR capacitor close to the VCC and GND pins to supply the high peak currents. The Miller clamp pin should be connected to the gate of the power transistor with a short, low-inductance trace to effectively suppress dv/dt-induced turn-on.

RFQ پەیوەندی
STGAP2HSA - 4A Galvanically Isolated Gate Driver | STMicroelectronics
STGAP2HSA

STGAP2HSA - 4A Galvanically Isolated Gate Driver | STMicroelectronics

The STGAP2HSA is a galvanically isolated single-channel gate driver from STMicroelectronics, designed to drive high-power IGBTs and SiC MOSFETs in industrial and automotive applications. It delivers up to 4A of peak output current with a wide supply voltage range of 3V to 18V on the primary side and 4.5V to 18V on the secondary side. The device features a 100V/ns common-mode transient immunity (CMTI) and a propagation delay of 75ns, ensuring robust performance in noisy power environments. A galvanic isolation barrier is a critical safety feature in power electronics that electrically separates the low-voltage control circuitry from the high-voltage power stage, preventing ground loops and protecting sensitive logic. The STGAP2HSA uses a capacitive isolation technology that provides reinforced isolation up to 6kV, meeting stringent safety standards for industrial motor drives and solar inverters. This isolation barrier is essential in applications where the control and power grounds are at different potentials, such as in half-bridge or full-bridge topologies. Key features of the STGAP2HSA include a 4A sink/source peak current, a 75ns propagation delay, and a 100V/ns CMTI. The device also offers a programmable dead time function, a shutdown pin for fault protection, and a separate output pin for Miller clamp, which prevents spurious turn-on of the power switch during high dv/dt events. The wide supply voltage range and rail-to-rail output make it compatible with a variety of gate drive circuits. The STGAP2HSA is built using STMicroelectronics' proprietary galvanic isolation technology, which uses a high-voltage capacitor to transfer signals across the isolation barrier. This architecture achieves low power consumption and high reliability, with a typical quiescent current of 1.5mA on the primary side. The device is available in a compact SO-8 package, which simplifies PCB layout and reduces board space in space-constrained designs. Typical applications include industrial motor drives, solar inverters, uninterruptible power supplies (UPS), and electric vehicle (EV) charging systems. In motor drives, the STGAP2HSA drives the IGBTs in the inverter stage, providing fast and reliable switching to minimize losses. In solar inverters, it drives the SiC MOSFETs in the boost converter, enabling high-frequency operation and improved efficiency. When designing with the STGAP2HSA, it is important to ensure proper PCB layout to minimize parasitic inductance in the gate drive loop. The Miller clamp output should be connected to the gate of the power switch to prevent false turn-on. Additionally, the dead time programming pin should be configured with an external resistor to set the desired dead time for the application.

RFQ پەیوەندی
STGAP2SA - 4A Galvanic Isolated Single Gate Driver | STMicroelectronics
STGAP2SA

STGAP2SA - 4A Galvanic Isolated Single Gate Driver | STMicroelectronics

The STGAP2SA is a galvanic isolated single gate driver manufactured by STMicroelectronics, designed to drive wide-bandgap power switches such as SiC MOSFETs and GaN HEMTs. It provides a 4A sink/source peak output current and features a 4 kV galvanic isolation barrier, making it suitable for high-voltage and high-reliability applications. The device is available in a narrow-body SO-8 package, which is compact and suitable for space-constrained designs. A galvanic isolated gate driver is a type of gate driver IC that provides electrical isolation between the input control side and the output power stage. This isolation is critical in applications where the power stage operates at high voltages, as it protects the low-voltage control circuitry from transients and ground potential differences. The STGAP2SA belongs to the category of isolated gate drivers, which are essential components in power electronics systems such as motor drives, power supplies, and inverters. Key features of the STGAP2SA include a 4A peak output current, a wide supply voltage range of 3V to 18V on the output side, and a 4 kV galvanic isolation rating. The device also offers a propagation delay of 75 ns, which is critical for high-frequency switching applications. The input side operates from 3V to 18V, and the device includes a Miller clamp function to prevent false turn-on of the power switch during high dv/dt events. The STGAP2SA utilizes STMicroelectronics' proprietary galvanic isolation technology, which provides robust isolation performance with high common-mode transient immunity (CMTI) of 100 V/ns. This ensures reliable operation in noisy environments. The device also features an under-voltage lockout (UVLO) on both the input and output sides, protecting the power switch from insufficient gate drive voltage. Typical applications for the STGAP2SA include motor drives, industrial power supplies, solar inverters, and electric vehicle (EV) charging systems. Its high output current and fast propagation delay make it suitable for driving SiC MOSFETs and GaN HEMTs in high-frequency power converters. The device is also used in welding equipment and induction heating systems where high reliability and isolation are required. When designing with the STGAP2SA, it is important to ensure proper PCB layout to minimize parasitic inductance and maintain isolation creepage distances. The Miller clamp feature should be utilized in applications with high dv/dt to prevent unintended turn-on. Additionally, the UVLO thresholds should be considered to ensure the gate driver operates within the specified voltage range.

RFQ پەیوەندی
STGAP4S - 4-Channel Isolated Gate Driver | STMicroelectronics
STGAP4S

STGAP4S - 4-Channel Isolated Gate Driver | STMicroelectronics

The STGAP4S is a 4-channel isolated gate driver from STMicroelectronics, designed for driving IGBTs and MOSFETs in high-voltage applications. It provides four independent galvanically isolated channels, each capable of delivering up to 4 A peak output current, making it suitable for three-phase inverters, motor drives, and industrial power supplies. The device operates from a supply voltage range of 4.5 V to 18 V on the logic side and 4.5 V to 18 V on the driver side, with a common-mode transient immunity (CMTI) of 100 V/ns, ensuring robust operation in noisy environments. An isolated gate driver is a type of gate driver that provides electrical isolation between the control circuitry and the power stage, protecting low-voltage logic from high-voltage transients and ground loops. It is a critical component in power electronics, enabling safe and reliable switching of power semiconductors. The STGAP4S belongs to the category of isolated gate drivers, which are part of the broader family of gate drivers, power management ICs, and semiconductor devices. Key features of the STGAP4S include a 4 A peak output current per channel, a wide supply voltage range, and a propagation delay of 100 ns. It also features an interlock function to prevent cross-conduction, a dedicated enable pin for each channel, and a fault output for system monitoring. The device is available in a 36-pin SSOP package, offering a compact solution for multi-channel gate drive applications. The STGAP4S utilizes STMicroelectronics' galvanic isolation technology, providing reinforced isolation up to 6 kV. The device includes a Miller clamp on each channel to prevent spurious turn-on of the power switch, and a desaturation protection feature for overcurrent detection. The architecture ensures high noise immunity and reliable operation in harsh industrial environments. Typical applications include motor drives, three-phase inverters, uninterruptible power supplies (UPS), and industrial power supplies. The STGAP4S is also suitable for renewable energy systems such as solar inverters and wind turbine converters. Its high CMTI and low propagation delay make it ideal for high-frequency switching applications. When designing with the STGAP4S, it is important to ensure proper PCB layout to minimize parasitic inductance and maintain signal integrity. The device requires careful attention to the isolation barrier and creepage distances to meet safety standards. Additionally, the supply decoupling should be implemented with low-ESR capacitors close to the VCC and GND pins.

RFQ پەیوەندی
STGIPS20C60-H - 600V 20A 3-Phase IGBT IPM | STMicroelectronics
STGIPS20C60-H

STGIPS20C60-H - 600V 20A 3-Phase IGBT IPM | STMicroelectronics

The STMicroelectronics STGIPS20C60-H is a 600 V, 20 A three-phase IGBT Intelligent Power Module (IPM) from the SLLIMM (Small Low-Loss Intelligent Molded Module) family, integrating gate drivers and short-circuit rugged trench-gate IGBTs in a 25-pin PowerDIP module measuring 0.993 inch (25.23 mm) wide. It is designed as a compact, drop-in inverter stage for variable-frequency drives and is rated for 600 V collector-emitter blocking with 20 A continuous phase current, plus an integrated bootstrap diode network, undervoltage lockout, and an on-board comparator for fault/over-current sensing via an external shunt resistor. What is an Intelligent Power Module (IPM)? An IPM is a power semiconductor module that integrates the power switches (here: IGBTs), their gate drivers, and protection features (UVLO, short-circuit, fault output) into a single isolated package. IPMs sit in the power management hierarchy between discrete IGBT/MOSFET inverter stages and higher-level integrated motor-drive modules, simplifying PCB design and shortening time-to-market for three-phase motor control applications such as HVAC compressors, washing-machine pumps, and small industrial inverters. Key features include 600 V short-circuit rugged IGBTs with trench-gate field-stop technology for low VCE(sat) and soft switching, a built-in shunt-style comparator with internal Vref and external CIN pin for hardware over-current protection, undervoltage lockout on all six driver channels, an open-drain fault output, and interlock logic that prevents shoot-through. The molded 25-PowerDIP package provides reinforced insulation and a thermally conductive substrate that simplifies heatsink attachment versus discrete through-hole designs. Typical applications include three-phase motor drives for white goods (washing machines, refrigerators, dishwasher pumps), low-power industrial variable-frequency drives (VFDs) up to about 1.5 kW, fan and compressor inverters for HVAC, and small servo pumps. The IPM's 20 A rating makes it suitable for 230 V AC mains-fed systems driving motors in the 0.37-1.1 kW range. When designing with this device, route the bootstrap capacitors close to pins U, V, W and ensure the comparator CIN pin is filtered to avoid nuisance trips. The internal Vref is non-adjustable, so over-current threshold is set by the external shunt resistor value only.

RFQ پەیوەندی
STPIC44L02PTR - 4-Channel Low-Side Pre-FET Driver | STMicroelectronics
STPIC44L02PTR

STPIC44L02PTR - 4-Channel Low-Side Pre-FET Driver | STMicroelectronics

STMicroelectronics STPIC44L02PTR is a four-channel, low-side pre-FET driver with four inputs and no outputs, operating from a 5 V supply and packaged in a 24-pin SSOP. The device provides a serial-in, parallel-out input interface, supports cascading, and includes an internal 55 V inductive-load clamp together with a VGS protection clamp for external power MOSFETs. A pre-FET driver is a gate-driver interface that conditions logic commands before they reach an external power MOSFET. In the broader semiconductor hierarchy, this device is a gate driver, which is a specialized interface IC within the power-management and driver ecosystem. Its low-side architecture means the controlled MOSFETs are connected between a load and ground, making it useful where the driver must source current into MOSFET gate terminals rather than sink current from a high-side floating gate network. The principal verified features are four independently addressed driver inputs, serial-in and parallel-in operation, cascading capability, independent shorted-load and short-to-battery protection functions, a 55 V internal inductive-load clamp, and VGS protection for external power FETs. The STPIC44L02PTR is identified as an automotive-temperature-grade component with a gull-wing SSOP package, making it suitable for demanding low-side switch-control systems where protected MOSFET gate drive is required. The serial-in, parallel-out organization allows commands to be shifted into the device through a serial interface and then presented to the corresponding MOSFET gates in parallel. This arrangement can simplify control wiring in multi-channel systems and provides an efficient path for cascading devices when more than four channels are required. Parallel operation provides a direct route for independent channel control where the host controller can drive the input interface directly. Typical uses include low-side MOSFET control in automotive body and comfort systems, relay and solenoid interfaces, inductive switching networks, industrial low-side switch stages, and protected external power-FET arrangements. The internal 55 V clamp is particularly relevant when an external MOSFET must tolerate an inductive event. Designers should still validate the complete power path, including load current, MOSFET avalanche capability, wiring inductance, and the exact protection behavior specified by the manufacturer. Design decisions should begin with the external MOSFET because STPIC44L02PTR is a pre-FET driver rather than a power-stage device. Verify that the selected MOSFET gate charge, gate threshold, maximum VGS, and avalanche rating support the intended switching conditions. Place the driver and protected MOSFETs so switching-loop inductance is minimized, while preserving adequate trace area and thermal paths for the power stage. This page consolidates the verified distributor and datasheet-search information for STPIC44L02PTR, identifies the confirmed protection features and package characteristics, and clearly separates documented data from parameters that still require confirmation from the complete manufacturer datasheet.

RFQ پەیوەندی
STPM801 - Programmable Current Limiting Switch | STMicroelectronics
STPM801

STPM801 - Programmable Current Limiting Switch | STMicroelectronics

The STPM801 is a programmable current limiting switch from STMicroelectronics, designed for power distribution and protection in a wide range of applications. It integrates a high-side MOSFET switch with programmable current limiting, thermal shutdown, and under-voltage lockout, providing robust protection for downstream circuitry. The device operates from an input voltage range of 2.7V to 5.5V and can deliver up to 1.5A of continuous current, making it suitable for USB ports, hot-swap applications, and general power management. A current limiting switch is a type of power management IC that controls the flow of electrical current to a load, protecting the power source and the load from overcurrent conditions. It is a key component in the power management hierarchy, sitting between the power source (such as a battery or USB port) and the load (such as a peripheral device). By integrating a MOSFET switch, current sensing, and protection features, it simplifies circuit design and enhances system reliability. Key features of the STPM801 include programmable current limiting via an external resistor, allowing designers to set the current limit from 100mA to 1.5A. It also features a low quiescent current of 50µA, a fast 1ms turn-on time, and a low on-resistance of 70mΩ, minimizing power loss. The device includes thermal shutdown at 150°C and under-voltage lockout at 2.5V, ensuring safe operation under fault conditions. It is available in a compact SOT-23-5 package, ideal for space-constrained designs. The STPM801 uses a high-side N-channel MOSFET architecture with an internal charge pump to drive the gate, enabling low voltage drop and efficient power delivery. The current limit is set by an external resistor connected to the ILIM pin, providing flexibility for different applications. The device also features a fault output pin that signals overcurrent or thermal shutdown events, enabling system-level monitoring and control. Typical applications include USB port power distribution, hot-swap power management, and general-purpose load switching in consumer electronics, industrial control, and automotive systems. The wide input voltage range and programmable current limit make it versatile for various power distribution scenarios. When designing with the STPM801, ensure the external current-limit resistor is placed close to the ILIM pin to minimize parasitic inductance. The input and output capacitors should be placed near the device to ensure stable operation and reduce voltage transients. Proper thermal management is essential when operating at high currents, as the device dissipates power proportional to the current and voltage drop.

RFQ پەیوەندی
STUSB1702YQTR - USB Type-C PD Controller with TX/RX Line Driver | STMicroelectronics
STUSB1702YQTR

STUSB1702YQTR - USB Type-C PD Controller with TX/RX Line Driver | STMicroelectronics

The STMicroelectronics STUSB1702YQTR is a USB Type-C port controller with integrated TX/RX line driver and BMC (Biphase Mark Coding) transceiver, qualified to AEC-Q100 and supplied in a 24-pin QFN EP (4x4 mm wettable flanks) package. It implements a USB Type-C source controller with VBUS power switch, dead-battery support, and USB Power Delivery (PD) message handling for USB 2.0 and SuperSpeed USB 3.0 signaling paths. The device operates over a supply range of 4.1 V to 22 V with a -40 C to +105 C operating temperature window, and the wettable-flank QFN-24 (QFN24 EP 4x4 mm) package enables automated optical inspection for automotive applications. Key features include USB Type-C cable attach and orientation detection (CC1/CC2 logic), USB PD 2.0 / 3.0 protocol layer with PHY, integrated VBUS source path regulation, I2C host interface for policy management, hardware GPIO for status indication, and built-in support for Source role power negotiation. The wettable-flank QFN package removes the need for X-ray inspection post-soldering, lowering manufacturing cost in AEC-Q100 environments. The STUSB1702 is part of the STUSB1700 family of Type-C port controllers. Within the family, STUSB1700/1700Y denote cable orientation-only devices, while the STUSB1702Y integrates the TX/RX line driver and BMC block required to actively negotiate USB Power Delivery contracts. Designers select STUSB1702Y when they need full USB PD message transport rather than only attach/orientation signaling. Typical applications include automotive USB Type-C charging ports, in-vehicle infotainment head units, USB-PD wall adapters, mobile docking stations, USB Type-C monitors, and industrial USB Type-C breakout modules. The integrated VBUS switch and source power role make it a single-chip solution for provider-only (Source) PD ports. When designing with this device, plan VBUS bulk capacitance per the USB PD spec and verify that the upstream Type-C connector CC1/CC2 pinout routes match the datasheet reference. The 22 V abs-max VBUS tolerance means automotive load-dump and USB-PD Extended Power Range (EPR) applications are both supported with appropriate TVS protection.

RFQ پەیوەندی
Si8271GB-ISR - 4A Isolated Gate Driver, 2.5kV, 8-SOIC | Skyworks
Si8271GB-ISR

Si8271GB-ISR - 4A Isolated Gate Driver, 2.5kV, 8-SOIC | Skyworks

The Skyworks Solutions Si8271GB-ISR is a 4 A galvanically-isolated single-channel gate driver with 2.5 kV RMS withstand voltage, housed in a narrow-body 8-pin SOIC (SO-8) package. It delivers 4 A peak source/sink drive current with a typical propagation delay of 50 ns and high CMTI of 400 kV/µs for switching power MOSFETs, IGBTs, and SiC/GaN HEMTs. An isolated gate driver is a galvanic isolation barrier combined with a high-current buffer stage, used to drive the gate of a high-side or low-side power transistor while protecting low-voltage control logic from high-voltage transients. The isolated gate driver category sits within the power management hierarchy: gate driver -> driver IC -> power management IC -> semiconductor. Si827x-family parts use proprietary silicon-oxide isolation instead of optocouplers or transformers, which eliminates LED-aging concerns and provides tight timing characteristics. Key features include 4 A peak output current, 30 ns typical propagation delay, 400 kV/µs common-mode transient immunity (CMTI), 2.5 kV RMS isolation per UL1577, integrated UVLO with 3 V threshold for IGBT/SiC protection, de-glitch input filtering, and a programmable dead-time (DT) pin. The narrow-body 8-SOIC footprint is pin-compatible with common opto-isolated gate drivers, enabling direct PCB replacement in many designs. The device uses Skyworks' proprietary silicon isolation technology based on RF-coupled differential transmission across a high-voltage silicon-oxide barrier. This approach eliminates the lifetime and CTR degradation inherent in optocouplers, and avoids the high-frequency emissions and large footprint of pulse transformers. The driver outputs swing rail-to-rail from VDD to GND on each side, supporting both +12 V and unipolar gate-drive rails. Typical applications include driving IGBTs in motor-control inverters, SiC MOSFETs in EV traction and onboard chargers, GaN HEMTs in telecom DC-DC bricks, solar inverters, industrial SMPS half-bridge stages, and digital-isolation upgrades for opto-coupler-based legacy designs. The wide driver supply range supports both 5 V and 12/15 V gate-drive rails. When designing with this part, place a 100 nF decoupling capacitor close to each VDD pin and a 4.7 µF bulk capacitor on the output-side VDD. For half-bridge use, the programmable dead-time pin prevents shoot-through; consult the manufacturer datasheet for the DT resistor selection table.

RFQ پەیوەندی
TAS5110DAPR - 50W Stereo Class D Amplifier | Texas Instruments
TAS5110DAPR

TAS5110DAPR - 50W Stereo Class D Amplifier | Texas Instruments

The Texas Instruments TAS5110DAPR is a 2-channel stereo Class D digital audio power amplifier designed for 50 W per channel into a 6 ohm load at 10% THD. It is a true digital audio amplifier power stage using TI Equibit technology and is packaged in a 32-pin HTSSOP. The device delivers 40 W per channel at 0.1% THD, with typical THD+N below 0.09% for a 1 kHz input signal and a dynamic range of 93 dB in the TDAA system. A Class D audio amplifier is a switching power amplifier that uses pulse-width modulation to represent an audio waveform. Unlike a conventional linear amplifier, its output transistors operate mainly in the saturated and unsaturated states, reducing dissipation and improving power efficiency. The TAS5110 belongs to the digital power-stage hierarchy and requires a compatible digital audio PWM processor to supply its command inputs. It is therefore positioned as the output stage of a true digital audio system rather than as a conventional analog-input amplifier. The principal performance figures cover continuous power, distortion, and signal-to-noise behavior. Output power reaches 50 W per channel into 6 ohms at 10% THD, while the lower-distortion figure is 40 W per channel at 0.1% THD. Typical THD+N is less than 0.09% with a 1 kHz input signal, and system dynamic range is 93 dB. The stereo architecture supports two independent audio channels in one package, reducing the number of power-stage ICs needed in a multichannel amplifier architecture. The device uses TI's Equibit technology as part of a true digital audio signal path. Digital command signals drive the internal PWM power stage, reducing sensitivity to analog input-stage distortion and supporting coordinated power management across multiple channels. Integrated short-circuit and thermal protection, mute control, shutdown control, and multiple digital inputs provide the basic controls needed for a robust amplifier module. Exact clock, control-voltage, and timing details should be taken from the manufacturer pin-description and timing tables before PCB implementation. Typical applications include powered speakers, home-theater and multimedia amplification, professional audio equipment, soundbars, and compact stereo systems requiring high output power from a surface-mount package. The 50 W per-channel capability is most useful with low-impedance speakers, while the 40 W rating at 0.1% THD provides a more conservative operating point for designs that prioritize low distortion. Pairing the device with a suitable TAS50xx digital audio processor enables direct digital command and system-level control. A critical layout consideration is the power stage's high-current switching output. The HTSSOP exposed thermal pad must be connected to a properly designed copper area and thermal path, while output-filter and speaker traces must be kept away from sensitive control and clock routes. Supply capacitors must be placed close to the power pins, and the manufacturer reference layout should be followed to control switching noise, voltage drops, and thermal performance. This page combines the manufacturer's core power and distortion ratings with package information, application guidance, design notes, and a conservative assessment of drop-in replacement options. It is intended to help engineers plan the power budget, thermal strategy, PCB footprint, digital audio interface, and speaker load before releasing a TAS5110DAPR-based design for production.

RFQ پەیوەندی
TAS5634DDV - 300W Stereo Class-D Power Stage | TI
TAS5634DDV

TAS5634DDV - 300W Stereo Class-D Power Stage | TI

Texas Instruments TAS5634DDV is a high-power Class-D audio amplifier power stage with PWM input, delivering 300 W stereo at 6 ohms or 600 W mono at 3 ohms from a nominal 58 V supply. It supports a 12 V to 62 V supply range and is packaged in a 44-pin HTSSOP with an exposed pad. A Class-D power stage is an audio power amplifier that uses pulse-width modulation to deliver energy to loudspeakers efficiently. Within the amplifier hierarchy, it is a power-management IC and semiconductor designed for high-current audio output. Unlike a linear audio amplifier, it reduces power dissipation by switching the output stage between supply rails, making it suitable for high-output home-theater, professional-audio, and multichannel audio systems. The TAS5634 supports two-channel stereo or single-channel mono operation, giving designers flexibility for multichannel amplification. Its 300 W stereo configuration and 600 W mono configuration operate from a nominal 58 V supply, while the 12 V to 62 V input range accommodates industrial power architectures. The exposed pad beneath the 44-pin HTSSOP package provides the primary thermal path for the high-power switching stage. The architecture is based on high-efficiency Class-D technology with a PWM signal input. The PWM interface requires a suitable upstream audio processor or PWM-generating modulator rather than a conventional analog line input. Differential PWM inputs allow the device to operate as a bridge-tied output stage, reducing common-mode concerns and supporting transformerless speaker connection when the system design and safety requirements permit it. Typical uses include powered home-theater speakers, professional monitor speakers, multiway cinema amplifiers, subwoofer amplifiers, and compact high-power audio systems. The stereo configuration serves two full-range or satellite speaker channels, while the mono configuration provides substantially higher output into a lower-impedance subwoofer. A thermal and acoustic design remains essential because high continuous output concentrates heat in the exposed-pad region. Use the exposed-pad land pattern and thermal via array exactly as shown in the manufacturer datasheet, and place the input, output, supply, and decoupling connections to minimize loop area. The high switching current requires short, wide copper paths, careful supply decoupling, and thermal design that keeps the device within its rated junction-temperature limits. Follow the datasheet guidance for filtering, grounding, and speaker protection. This product page consolidates the key electrical ratings, package details, application guidance, verified drop-in family options, and practical thermal-layout considerations needed to evaluate the TAS5634DDV before schematic capture and prototype assembly.

RFQ پەیوەندی
TBD62503AFNG - 7-Ch DMOS Sink Driver Array 50V/0.3A | Toshiba
TBD62503AFNG

TBD62503AFNG - 7-Ch DMOS Sink Driver Array 50V/0.3A | Toshiba

The Toshiba TBD62503AFNG is a 7-channel sink-type DMOS transistor array housed in a 16-pin SSOP package, capable of switching loads up to 50V and 300 mA per channel. Built on Toshiba's BiCD (Bipolar, CMOS, DMOS) monolithic silicon process, the device integrates seven open-drain N-channel DMOS output transistors that share a common ground return, making it ideal for low-side switching of relays, solenoids, lamps, LED displays, and logic-level buffers. A DMOS transistor array is a type of power driver IC that uses seven discrete N-channel double-diffused MOS transistors integrated onto a single silicon die, each with its own gate and drain pin and a shared source (substrate) tied to ground. This monolithic array category sits within the broader power management and driver IC taxonomy: transistor array -> peripheral driver -> interface IC -> semiconductor. The 50V drain-to-source breakdown and 0.3A continuous drain current make it well-suited for industrial control boards and 24V industrial bus switching. Key features include a wide operating supply range of up to 50V on the drain side, low on-resistance DMOS outputs that minimize conduction losses versus bipolar Darlingtons, 3V CMOS/TTL-compatible logic inputs, and built-in clamping diodes for inductive loads. Each of the seven channels can be driven independently from a microcontroller GPIO or logic gate, with output currents of 300 mA continuous and pulse handling exceeding 500 mA per channel. The architecture is optimized for digital-logic-to-load interfacing: each input pin drives a MOSFET gate through a CMOS inverter stage, while the output stage is a DMOS open-drain switch with intrinsic body diode protection. Because the outputs are N-channel low-side switches rather than Darlington pairs, the on-resistance stays in the low-ohm range across the full temperature range, eliminating the classic bipolar Vce(sat) loss that wastes power as heat in legacy ULN2003-style arrays. Typical applications include programmable logic controller (PLC) digital output modules, LED matrix and seven-segment display drivers, relay and solenoid driver boards, and unipolar stepper motor driving where multiple low-side channels are required. The SSOP-16 footprint is also compatible with breadboard-friendly adapter boards for prototyping. When designing with this part, note that it is a sink (low-side) driver only - loads must be tied to the positive supply. Each output requires flyback protection for inductive loads; the device integrates a body diode, but external Schottky or fast-recovery diodes are recommended above 100 mA inductive currents to keep thermal dissipation under control. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
TDA21462AUMA1 - 60A OptiMOS Smart Power Stage 4.25-16V | Infineon
TDA21462AUMA1

TDA21462AUMA1 - 60A OptiMOS Smart Power Stage 4.25-16V | Infineon

The Infineon TDA21462AUMA1 is a 60 A integrated smart power stage (DrMOS) for synchronous buck DC/DC converters, combining a low-quiescent-current synchronous buck gate driver IC with co-packaged high-side and low-side OptiMOS MOSFETs plus an integrated Schottky diode, housed in a 39-pin PG-IQFN package. The device supports an input voltage range of 4.25 V to 16 V and switching frequencies from 100 kHz to 1500 kHz, targeting single- and multi-phase buck converters in computing, telecom, and industrial point-of-load applications. A DrMOS (Driver + MOSFET integrated power stage) is a category of power management IC that monolithically co-packages a half-bridge gate driver with its high-side and low-side power MOSFETs into a single surface-mount module. This category sits within the broader power management hierarchy: DrMOS -> integrated power stage -> voltage regulator -> power management IC -> semiconductor. By collapsing the driver-to-MOSFET loop into one package, DrMOS parts minimize parasitic inductance, reduce switch-node ringing, and shrink PCB footprint versus discrete driver-plus-MOSFET implementations. Key features of the TDA21462AUMA1 include cycle-by-cycle over-current protection with a programmable threshold, VCC and VDRV under-voltage lockout (UVLO), phase fault detection, IC temperature reporting, and thermal shutdown. The internal MOSFET current-sense algorithm with temperature compensation delivers accurate current telemetry versus inductor DCR-sense methods, enabling precise multi-phase current sharing. The exposed top-side thermal pad and source-down package orientation optimize PCB heat transfer and minimize switch-node ringing when Infineon layout guidelines are followed. The TDA21462 utilizes a bootstrap high-side gate drive architecture fed by an internal charge pump, supporting 100% duty-cycle operation. Internal dead-time control and adaptive anti-shoot-through protection limit cross-conduction losses. The integrated Schottky diode across the low-side MOSFET reduces body-diode reverse-recovery losses during dead-time, improving light-load efficiency and reducing switch-node undershoot. Differential PWM inputs (PWM and /PWM) interface directly to multiphase PWM controllers from Infineon, Renesas, Monolithic Power, and ON Semiconductor. Typical applications include 60 A single-phase or interleaved multi-phase buck VRM cores for network processors, ASICs, and FPGAs; telecom 12 V intermediate bus converters; industrial PoL rails; and high-current graphics and AI accelerator cards. The 39-pin PG-IQFN footprint simplifies layout and is pin-compatible with industry-standard 5 V/12 V DrMOS products. When designing with this device, follow the manufacturer reference layout exactly: place input MLCC capacitors within 1 mm of the PVIN/PGND pins, keep the BOOT capacitor loop minimal, and flood the top-side exposed pad with thermal vias. The cycle-by-cycle OCP threshold must be programmed via the ILIM pin resistor before enabling PWM switching. Do not operate above 16 V PVIN or below 4.25 V PVIN; the device does not tolerate 20 V transients without external TVS clamping. This page synthesizes distributor pricing, drop-in same-brand and cross-brand alternatives, application-specific design notes, and pinout diagrams drawn from the Infineon TDA21462 datasheet, providing engineering context not duplicated on the manufacturer's PDF.

RFQ پەیوەندی
TDA235E0 - 300A Dual-Phase Smart Power Stage | Infineon
TDA235E0

TDA235E0 - 300A Dual-Phase Smart Power Stage | Infineon

The Infineon TDA235E0 is a dual-phase smart power stage IC designed for high-current, high-density power delivery to AI accelerators, server CPUs, and vertical power delivery (VPD) modules. It integrates Infineon OptiMOS 6 MOSFETs with a dual-phase driver IC into a compact 6 x 6 x 0.8 mm³ package, delivering up to 300 A peak current per phase and 120 A total design current with power density exceeding 2 A/mm². The device supports both lateral and vertical power delivery topologies and is engineered for liquid-cooled data center applications. A smart power stage (SPS) is an integrated power-conversion building block that combines the high-side and low-side MOSFETs, gate drivers, current sensing, and protection circuitry into a single package, enabling multi-phase buck regulators that feed low-core voltages (typically 0.6 V to 1.2 V) to high-current processors. Smart power stages sit below multi-phase controllers and DC-DC converter ICs in the power management hierarchy, and are a category of point-of-load (PoL) regulators optimized for AI/GPU/ASIC silicon. They expose per-phase current and temperature telemetry to the upstream controller for adaptive voltage positioning, load-line regulation, and fault management. Key features of the TDA235E0 include integrated OptiMOS 6 technology for best-in-class figure-of-merit (FOM), a precision per-phase current-sense output for multi-phase current balancing and telemetry, built-in protection (over-current, over-temperature, under-voltage), high switching frequency support for reduced output inductance, and top-side thermal pad optimized for cold-plate liquid cooling. The exposed top side has low junction-to-top-side thermal impedance to facilitate direct-to-cold-plate heat removal in server racks. The architecture pairs two synchronous buck power stages (each a high-side + low-side OptiMOS 6 half-bridge plus gate driver) inside one package, sharing a common bootstrap and ground reference. Telemetry includes per-phase analog current output and overtemperature flag. Compared with discrete DrMOS implementations, the TDA235E0 reduces PCB footprint, eliminates parasitic loop inductance between MOSFETs and driver, and simplifies multi-phase interleaving for 6-phase or 8-phase VRs feeding 600 A-class GPU/ASIC cores. Typical applications include AI accelerator core rails (GPU, TPU, custom ASICs at 600-1000 A), server CPU voltage regulators, vertical power delivery modules for processor sockets, high-performance computing motherboards, and 48 V direct-to-load buck stages where two TDA235E0 phases feed a secondary-side multi-phase VR. The compact 6x6 mm footprint allows 8-phase solutions to fit beneath BGA sockets. When designing with the TDA235E0, follow the manufacturer's recommended PCB layout for input capacitors and gate-drive return paths to minimize switching losses. Ensure the upstream multi-phase controller is compatible with Infineon's SPS interface (current-sense and temperature-flag timing); the TDA235E0 is pin-compatible with the higher-current TDA235E5 variant in the same family. This page synthesizes Infineon launch information, distributor pricing references, and design considerations not found in a single datasheet, including drop-in alternatives and liquid-cooling thermal guidance.

RFQ پەیوەندی
TDE1707BFPT - 0.5A Intelligent Power Switch, 48V, SOIC-8 | STMicroelectronics
TDE1707BFPT

TDE1707BFPT - 0.5A Intelligent Power Switch, 48V, SOIC-8 | STMicroelectronics

The STMicroelectronics TDE1707BFPT is a 0.5 A integrated intelligent power switch housed in an 8-pin SOIC package, designed for industrial proximity detection and high-side / low-side driver applications. It supports a wide supply voltage range of 6 V to 48 V and features internal voltage clamping, supply and output reversal protection, thermal shutdown, plus GND and Vs open-wire protection, making it a robust solution for harsh electrical environments. An intelligent power switch is a type of power management IC that combines a power MOSFET output stage with diagnostic feedback, protection features, and sometimes an internal auxiliary regulator. Within the broader semiconductor taxonomy, it belongs to the family of power switches and load drivers, sitting between a discrete MOSFET (which requires external protection logic) and a fully featured solid-state relay. This category serves as a building block in industrial automation systems where a logic-level signal must safely switch a higher-power DC load with built-in fault reporting. Key specifications of the TDE1707BFPT include a continuous output current of 0.5 A, bipolar output stage configurable for either high-side (load to GND) or low-side (load to Vs) operation, and an internal +5 V auxiliary supply usable for powering external circuitry. The device also includes a dedicated LED status driver capable of sourcing or sinking approximately 3 mA (IOLD typ.), which reflects the output state for diagnostics. Overload and short-circuit protections are integrated, along with thermal shutdown for safe operation under fault conditions. From an architectural perspective, the TDE1707BFPT integrates a vertical power DMOS output transistor with on-chip logic for protection, diagnostic feedback, and an internal 5 V LDO that powers both the gate drive and any external sensor circuitry. The bipolar 1:2 output configuration simplifies PCB routing by allowing the same part to serve as either a source or sink driver. Designers should note that the supply and output reversal protection eliminates the need for external TVS diodes on the output node in many 24 V industrial systems. Typical applications include proximity detectors and inductive position sensors in industrial 24 V PLCs, 12 V and 24 V automotive body and chassis modules (relay and solenoid replacement), and process control solenoid or valve drivers. The internal +5 V supply is particularly useful for powering Hall-effect or proximity sensors directly from the switch without needing an additional regulator. When designing with this part, ensure that the load current does not exceed 0.5 A continuously and verify thermal performance under worst-case ambient conditions. The SO-8 package has limited thermal headroom, so PCB copper pour area directly under the exposed pad is critical for thermal dissipation. This page consolidates distributor pricing, drop-in alternatives, and application guidance that goes beyond the manufacturer datasheet to support rapid design-in.

RFQ پەیوەندی
TEA2096T/1J - GreenChip Dual SR Controller | NXP | LLC Power
TEA2096T/1J

TEA2096T/1J - GreenChip Dual SR Controller | NXP | LLC Power

The NXP TEA2096T/1J is a GreenChip dual synchronous rectifier (SR) controller IC for the secondary side of switched-mode power supplies, housed in an 8-pin SO (SO-8) package. It is a dedicated SR controller for resonant converters such as LLC topologies, with two driver stages for driving two SR MOSFETs and an adaptive gate drive method for maximum efficiency at any load. A synchronous rectifier controller replaces the rectifier diodes on the secondary side of an SMPS with MOSFETs driven by a dedicated controller, dramatically reducing conduction losses. Within the power management hierarchy, the TEA2096T sits in the secondary-side controller category of switching controller ICs. Where a diode drop of 0.5 V to 0.7 V wastes power at high output currents, a synchronously driven MOSFET with low RDS(on) can cut that loss by a factor of 5 to 10, which is why SR controllers are standard in high-efficiency adapters and server power stages. Key characteristics of the TEA2096T include its dual-channel architecture (two SR MOSFET drivers in one SO-8 package), an adaptive gate drive scheme that optimizes conduction time and dead-time at any load, and GreenChip design principles targeting high efficiency and low standby power. The dual-driver integration reduces external component count versus single-channel SR controllers in center-tapped secondary windings. Technically, the TEA2096T senses the drain-source voltage of the SR MOSFETs to detect current direction, turning the gates on when the body diode conducts and off before reverse current flows. This adaptive control prevents cross-conduction and reverse-current losses that reduce efficiency in fixed-timing SR schemes, especially at light load where fixed-delay controllers typically mis-time gate transitions. Typical applications include LLC resonant converters in AC-DC adapters, USB-PD fast chargers, and server/telecom power supplies with center-tapped or full-bridge secondary rectification. High-current 5 V and 12 V rails benefit most, where diode losses dominate. Design consideration: proper placement of the sense lines close to the SR MOSFET drains is critical; long sense traces pick up switching noise and can cause false turn-on, degrading efficiency or damaging the MOSFETs. This page adds information gain beyond the datasheet: distributor pricing with quantity breaks, alternative sourcing options, and practical design notes compiled from manufacturer and distributor data as of 2026-09-13.

RFQ پەیوەندی
TEA2376BT-1Y - Digital Interleaved PFC Controller | NXP
TEA2376BT-1Y

TEA2376BT-1Y - Digital Interleaved PFC Controller | NXP

The NXP Semiconductors TEA2376BT/1Y (TEA2376BT-1Y) is a digital configurable two-phase interleaved Power Factor Correction (PFC) controller for high-efficiency power supplies, operating in discontinuous conduction mode (DCM) or quasi-resonant (QR) mode with valley switching over a switching frequency range of 40 kHz to 130 kHz, housed in a 14-pin SOIC (SO-14, 3.90 mm width) surface-mount package. A PFC controller is a power management IC that shapes the input current waveform of an AC-DC power supply so that it follows the input voltage, maximizing power factor and minimizing harmonic distortion. Within the power-supply control hierarchy, the PFC stage sits between the input rectifier and the downstream DC-DC converter, ensuring compliance with harmonic-current regulations such as those applied to TVs, servers and industrial equipment. Key features include digital configurability that reduces external component count, two-phase interleaving that halves input ripple current and spreads thermal stress across two boost stages, and valley switching that minimizes switching losses for high efficiency. For light-load conditions the controller supports phase shedding and burst mode operation, improving standby and low-load efficiency in modern energy-regulated designs. Technically, the TEA2376 family implements its control loop digitally, allowing configuration of protection thresholds, frequency ranges and phase management without resistor-capacitor tuning. Discontinuous conduction and quasi-resonant operation avoid hard-switching turn-on losses, while interleaving cancels ripple currents at the PFC input, simplifying EMI filter design. Typical applications include TV power supplies, computing and server power supplies, and industrial power systems where a regulated DC bus (typically around 380-400 V from a boost PFC stage) feeds a downstream flyback or LLC converter. The interleaved topology suits power levels where a single boost phase would be thermally or ripple limited. When designing with the TEA2376BT/1Y, verify the supply voltage range (22 V per distributor data) and configure the switching-frequency window so that valley switching remains valid across the full mains and load range. This page synthesizes distributor pricing, lifecycle data, and practical design guidance for the TEA2376BT/1Y not consolidated in the manufacturer datasheet.

RFQ پەیوەندی