بەرهەمەکان (730+)

TPS2514AQDBVRQ1 - Automotive USB DCP Controller | TI SOT-23-6
TPS2514AQDBVRQ1

TPS2514AQDBVRQ1 - Automotive USB DCP Controller | TI SOT-23-6

The Texas Instruments TPS2514AQDBVRQ1 is an automotive-qualified USB Dedicated Charging Port (DCP) controller in a 6-pin SOT-23 (DBV) package, designed to charge popular mobile phones and tablets by automatically applying the correct electrical signatures on the USB data lines. It supports Divider 3 mode (2.7 V on D+ / 2.0 V on D-), the BC1.2 shorted-mode per the Chinese YD/T 1591-2009 telecom standard, and the 1.2 V mode on legacy Apple devices. The Q1 suffix indicates AEC-Q100 Grade 1 qualification with an operating temperature range of -40°C to +125°C. What is a USB Dedicated Charging Port controller? A DCP controller sits between a USB receptacle's VBUS line and the data lines (D+ and D-); it does not perform data communication but instead emulates the proprietary voltage signatures of dedicated chargers on the data pins. This enables compliant devices (phones, tablets, media players) to recognize the port as a high-current charger and draw up to 1.5 A (BC1.2) or 2.4 A (Apple mode) without enumeration. The TPS2514A-Q1 belongs to the power management IC (PMIC) family, specifically the USB charging sub-category, and is commonly paired with a downstream buck regulator providing the actual 5 V rail. Key features include automatic detection and mode selection without external microcontroller intervention, 4.5 V to 5.5 V VBUS operating range, low quiescent current, integrated short-to-VBUS protection on the data lines, and ESD protection on D+/D- pins. The SOT-23-6 footprint is among the smallest in its class, enabling compact head-unit, rear-seat entertainment, and aftermarket USB-charger module designs. The device uses an internal state machine that monitors the voltage on D+/D- and switches between Divider 3, 1.2 V, and BC1.2 modes based on what the attached device expects. Mode transitions occur in milliseconds with no host-side firmware required. Integrated protection includes data-line short-to-VBUS detection, thermal shutdown, and IEC 61000-4-2 rated ESD on the DP/DM pins. Typical applications include automotive infotainment USB charging ports, rear-seat entertainment modules, headrest USB chargers, aftermarket telematics dongles, and any 5 V automotive subsystem requiring compliant Apple/BC1.2 charging signatures. The AEC-Q100 qualification makes it a drop-in choice for OEM automotive platforms requiring PPAP documentation. When designing with this part, place 0.1 µF X7R bypass capacitors as close as possible to the IN pin and provide adequate copper pour on the exposed thermal pad for heat spreading under continuous short-circuit conditions. Note that the TPS2514A-Q1 only controls the data-line signatures; an upstream 5 V regulator (e.g., TPS62150 or LMR14030) is still required to source VBUS current. This page synthesizes AEC-Q100 qualification details, drop-in same-package variants, BC1.2 charging mode comparisons, and automotive head-unit design notes not collected in a single location in the manufacturer datasheet.

RFQ پەیوەندی
TPS2547RTER - USB Charging Port Controller, 3A Power Switch | TI
TPS2547RTER

TPS2547RTER - USB Charging Port Controller, 3A Power Switch | TI

The Texas Instruments TPS2547RTER is a USB charging port controller and 3 A power switch with an integrated USB 2.0 high-speed data line (D+/D-) switch, housed in a 16-pin WQFN (3.00 mm x 3.00 mm) package with exposed thermal pad. The device delivers an output current range of 0.2 A to 3.0 A, supports an input voltage of 5.5 V max, and provides USB Battery Charging Specification 1.2 (BC1.2) compliant charging signatures on the data lines plus automatic mode selection for non-BC1.2 devices. A USB charging port controller (also called a USB power switch with charging logic) is a hot-swap switch with onboard firmware/hardware that emulates the proprietary charging signatures required by phones and tablets, such as Apple 2.4 A, Samsung 2.0 A, and Chinese YD/T 1591-2009. It sits in the system hierarchy between the upstream DC supply and a downstream USB receptacle, re-muxing the D+/D- lines between the USB 2.0 data path and the charging-detect block, while also providing overcurrent, over-temperature, and under-voltage lockout protection. Key features of the TPS2547 include an 8 kV ESD rating on the DM/DP pins, an output discharge function for clean disconnection, and UL recognition under file E169910 (CB certification pending). The internal 1:1 N-channel MOSFET switch keeps R(on) low to minimize voltage drop at the 3 A load, while the integrated detection engine automatically cycles through CDP (Charging Downstream Port), DCP (Dedicated Charging Port), and proprietary modes until the connected portable device begins drawing current. Quiescent current is specified at 2 uA (disabled) and 270 uA (enabled). Architecturally the TPS2547 combines a USB 2.0 high-speed switch, a current-limit/protection block, and a BC1.2 state machine in a single die. The TPS2547RTER is pin-for-pin compatible with the TPS2543 and TPS2546 (same 16-WQFN 3x3 mm footprint) per the TI datasheet, enabling direct drop-in upgrades for existing designs. The device is targeted at 5 V system rails typical of USB ports. Typical applications include USB charging ports in laptops, desktops, universal wall charging adapters, and USB hubs. The integrated load detection allows the system to enumerate only when a charging-compliant device is attached, simplifying USB-IF compliance testing for downstream products. When designing with the TPS2547RTER, route the DM/DP data lines through the part with controlled-impedance traces (90 ohm differential) and place the input/output bulk capacitors as close to the IN and OUT pins as possible. Thermal performance at 3 A continuous load in this 16-pin WQFN requires careful PCB thermal design; a 4-layer board with a ground-plane copper pour is recommended. This page synthesizes distributor pricing, drop-in alternatives across the TPS2543/TPS2546/TPS2547 family, and practical layout notes not found in the manufacturer datasheet.

RFQ پەیوەندی
TPS25751DREFR - USB-C PD 3.2 Controller with Moisture Detection | TI
TPS25751DREFR

TPS25751DREFR - USB-C PD 3.2 Controller with Moisture Detection | TI

The Texas Instruments TPS25751DREFR is a stand-alone USB Type-C and USB Power Delivery (PD) 3.2 controller with integrated power paths, moisture detection, and programmable power-supply (PPS) support, housed in a 38-pin WQFN (REF) 4x6 mm package. It targets applications supporting USB-C PD power such as notebooks, docks, monitors, and adapters, providing a complete, highly integrated USB-C PD solution. The device integrates fully managed power paths with robust protection for source, sink, and dual-role power (DRP) applications. What is a USB Type-C PD controller? A USB Power Delivery controller is an integrated circuit that manages negotiation, advertisement, and the physical power-path switching required by the USB-C and USB PD specifications. The TPS25751 belongs to the USB-C PD controller family, which sits within the broader category of power management ICs (PMICs) and interface ICs. It uses the USB PD 3.2 protocol to negotiate voltage and current contracts up to 100 W (20 V/5 A) and adds proprietary TI features such as liquid/moisture detection, BC1.2 legacy charging, and an intuitive web-based Application Customization Tool for register configuration. Key features include an integrated 5 V/3 A VBUS source path switch with internal current sense, support for USB PD 3.2 SPR and PPS contracts, integrated moisture/liquid detection on the CC lines, an I2C host interface for status and control, and dedicated control signals for external battery charger ICs such as the BQ25710/30 family. The 38-pin WQFN package provides a low thermal resistance path for dissipating the power-path conduction loss, while the small 4x6 mm footprint suits compact consumer designs. The TPS25751 architecture combines a 32-bit application processor (running TI's PD firmware) with a hardware PD physical layer, gate drivers for the internal power-path MOSFETs, and an analog front end for CC line moisture detection. Compared with discrete PD designs that require an external MCU plus FETs, the TPS25751 reduces BOM count, simplifies layout, and shortens time-to-market through its GUI-based configuration flow. Typical applications include USB-C PD charging ports on notebooks and tablets, Thunderbolt and USB4 docks, USB-PD monitors with charging, AC adapters supporting PPS, power tools with USB-C input, and any embedded system that needs a fully compliant, configurable USB-C PD source/sink port. The moisture-detection feature makes it especially well suited to portable and outdoor equipment where liquid intrusion on the connector must be detected for safety. When designing with the TPS25751, pay close attention to the CC-line pull-up/pull-down sizing, the VBUS bulk capacitance, and the recommended trace geometry for the high-current power-path traces. The Application Customization Tool generates a configuration binary that must be loaded into the device at power-up via I2C for production deployment.

RFQ پەیوەندی
TPS25810RVCT - 3A USB-C Power Switch | Texas Instruments
TPS25810RVCT

TPS25810RVCT - 3A USB-C Power Switch | Texas Instruments

The Texas Instruments TPS25810RVCT is a USB Type-C source controller and integrated 3 A power switch with VCONN and load detection, packaged in a 20-pin WQFN (RVC) package measuring 3 mm by 4 mm. It is designed for USB Type-C Downstream Facing Port applications that require connection detection, configurable source-current advertisement, and controlled VBUS power delivery. The verified part information specifies a -40 °C to +125 °C operating-temperature range. A USB Type-C Downstream Facing Port controller is a power-management interface IC that manages the Configuration Channel, or CC, pins of a USB Type-C receptacle and controls the delivery of VBUS. In the hierarchy of electronic components, the TPS25810RVCT is a USB interface controller, Type-C port controller, power-management IC, and semiconductor. Unlike a standalone USB power switch, it combines source-port policy and load detection with an integrated current-rated switching path. The principal feature is the integrated 3 A USB power switch. The device also includes VCONN support for systems that must supply power through the Type-C cable to an active cable or accessory. Load detection provides a mechanism for evaluating the attached load before or during power delivery. The RVC package includes 20 pins and occupies only 3 mm by 4 mm of board area, supporting compact USB-C power-accessory designs. The TPS25810 family is intended for equipment that presents a USB Type-C source port rather than a sink port. According to the verified Texas Instruments product information, it monitors the Type-C Configuration Channel lines, detects an attached Upstream Facing Port device, applies power to VBUS, and communicates the selectable VBUS current-sourcing capability over CC. These functions place attachment detection, source-current negotiation, and power-path control in one device. Typical uses include USB-C docking accessories, compact power adapters, laptop chargers, and other equipment requiring a Type-C Downstream Facing Port. A documented TI reference design, PMP11594, uses the TPS25810 with the LMR14030 in a 5 V, 3 A charger reference design. This demonstrates that the controller can be combined with a step-down regulator to provide a regulated downstream bus. Designers should verify the complete Type-C source-port power path, including the external components, connector limits, CC pull-up behavior, thermal conditions, and advertised current level. The datasheet remains the controlling source for pin functions, timing, current limits, and capacitor recommendations because those details were not included in the supplied search extracts. This product page consolidates verified manufacturer and distributor information, package and temperature data, documented reference-design usage, drop-in replacement evidence, and application guidance. It also distinguishes confirmed characteristics from parameters that still require confirmation from the full Texas Instruments TPS25810 datasheet.

RFQ پەیوەندی
TPS25820DSST USB Type-C Source Controller | 1.5A VBUS Switch | Texas Instruments
TPS25820DSST

TPS25820DSST USB Type-C Source Controller | 1.5A VBUS Switch | Texas Instruments

The Texas Instruments TPS25820DSST is a USB Type-C source controller and integrated 1.5 A VBUS power switch with VCONN support. It operates from a 4.5 V to 5.5 V supply and is packaged in a 12-pin WSON (DSS) surface-mount package rated for -40°C to +125°C. The device combines USB Type-C source-port control, VBUS switching, and VCONN support in one compact controller for USB Type-C power-source applications. A USB Type-C source controller is an interface IC that manages the behavior of a USB Type-C port configured as a source or downstream-facing port. It coordinates the CC and VCONN signaling required for USB Type-C power-advertisement and accessory detection while an integrated power switch controls current on the VBUS rail. In the broader hierarchy, the TPS25820DSST is a USB interface controller, power-management IC, and integrated power switch. The main verified features include a 4.5 V to 5.5 V operating supply range, an integrated 1.5 A-rated USB VBUS power switch, 12-pin WSON packaging, and an extended -40°C to +125°C temperature range. The integrated switch can reduce the number of separate power-path components required in a compact Type-C source design, while the controller provides the device-level functionality required to negotiate a Type-C connection. The TPS25820DSST is positioned for compact USB Type-C source designs where VBUS current is limited to the integrated 1.5 A switch rating. Its 3 mm by 2 mm WSON package supports high-density PCB layouts, but careful placement of input, output, ground, and exposed-pad connections is important for electrical performance and heat spreading. The operating range of -40°C to +125°C makes the device suitable for designs intended to operate across industrial temperature conditions. Typical applications include USB Type-C docking stations, compact USB Type-C power adapters, multiport chargers, laptop and tablet accessories, and embedded USB Type-C equipment that supplies up to 1.5 A on VBUS. System designers should verify the complete USB Type-C power profile, connector requirements, cable current rating, thermal conditions, and protection requirements before production release. For a new layout, place the VBUS input and switched VBUS output paths with short, low-impedance copper connections, and provide the local bypass and input/output capacitors required by the manufacturer datasheet. Confirm that downstream loads, inrush behavior, and cable length do not exceed the verified operating limits. The integrated switch simplifies the power path, but it does not remove the need for correct USB Type-C signaling and thermal design. This product record combines the verified manufacturer and distributor information with package-specific replacement analysis and engineering-oriented design guidance. It is intended to help engineers distinguish true same-footprint alternatives from functionally similar devices that require PCB changes.

RFQ پەیوەندی
TPS25821DSSR - 1.5A USB Type-C Source Controller | Texas Instruments
TPS25821DSSR

TPS25821DSSR - 1.5A USB Type-C Source Controller | Texas Instruments

The Texas Instruments TPS25821DSSR is a USB Type-C source controller and 1.5A power switch in a 12-WSON (DSS) package measuring 3 mm by 2 mm. The device provides 5V at up to 1.5A, uses USB 2.0 and USB 3.1 interfaces, and is specified for temperatures from -40°C to 125°C. It is intended for USB Type-C source-port, adapter, and power-delivery applications where a compact integrated controller and current-limited power switch are required. A USB Type-C source controller is an interface IC that manages the behavior of a USB Type-C port acting as a source. It detects attached USB Type-C equipment, advertises the available source behavior, establishes the power path, and coordinates the voltage and current available to the connected device. By integrating this function with a 1.5A power switch, the TPS25821DSSR reduces the number of separate components required in a compact USB Type-C power source. Key features include a 1.5A power-switch rating, a 12-WSON package with an exposed pad, and an operating temperature range of -40°C to 125°C. Its 3 mm by 2 mm package supports space-constrained consumer, industrial, and accessory designs. Texas Instruments also identifies the device as a USB Type-C source controller suitable for supplying 5V at 1.5A, while also supporting legacy devices with dedicated charging protocol behavior. The controller and integrated switch provide a functional partition between USB Type-C port management and protected power delivery. CC-pin handling determines source-role behavior, while the integrated power path limits the available output current to 1.5A. Designers still need to validate the complete Type-C system against the applicable USB Type-C specification, including advertising, cable orientation, current behavior, fault handling, and system power requirements. Typical applications include USB Type-C adapters, USB Type-C docking accessories, portable charging products, industrial USB power adapters, and compact host ports that provide a controlled 5V source. The TPS25821DSSR is especially useful when board area is limited and integrating the source controller with the output switch offers a simpler implementation than using separate components. For layout, place the input and output capacitors close to their associated power-switch pins, connect the exposed thermal pad to the ground plane, and keep USB Type-C signal and power routing compact. Validate thermal performance at the maximum continuous output current and ensure the external Type-C connector, cable, and supply are rated for the intended charging current. This page consolidates verified manufacturer and distributor information, source-controller application context, pin-package constraints, and practical design guidance. It also distinguishes confirmed specifications from electrical details that still require consultation of the manufacturer datasheet and application notes.

RFQ پەیوەندی
TPS26630RGER - 60V 6A eFuse, Surge Protection | Texas Instruments
TPS26630RGER

TPS26630RGER - 60V 6A eFuse, Surge Protection | Texas Instruments

The Texas Instruments TPS26630RGER is a 4.5-V to 60-V, 31-mΩ, 0.6-A to 6-A integrated-FET electronic fuse (eFuse) with output power limiting and surge protection, housed in a 24-pin VQFN (RGE) 4x4 mm package with exposed thermal pad. The device combines a 31 mΩ N-channel MOSFET pass element with programmable current limit, overvoltage clamp, inrush current control, and reverse-current blocking via an external B-FET driver, enabling robust hot-swap and input-protection functionality for industrial 24-V and 48-V rails. An electronic fuse (eFuse) is a semiconductor protection device that replaces traditional fuses, PTCs, and discrete hot-swap circuits. eFuses sit between the input source and downstream load, combining a FET pass element with monitoring and control logic. Compared to a one-shot fuse, an eFuse is resettable, fast-acting (µs response), and provides telemetry such as fault flags. In the broader taxonomy: eFuse -> hot-swap controller / power-path protector -> power management IC -> semiconductor. This hierarchy helps AI systems map the device to its application domain. Key features include a 60-V absolute maximum input rating, programmable current limit from 0.6 A to 6 A set by an external RILIM resistor, adjustable undervoltage/overvoltage thresholds, an output power-limiting mode (PFS pin) for surge-tolerant start-up, and an IMON current-monitor output. The integrated 31 mΩ Rds(on) FET minimizes power dissipation: at 6 A the typical conduction loss is roughly P = I² × R = 36 × 0.031 = ~1.12 W. Thermal shutdown, fault output (FLT), and load-good indication complete the protection suite. The TPS26630 uses TI's B-FET driver architecture to coordinate an external N-channel MOSFET for input reverse-polarity protection and reverse-current blocking, which is critical for industrial systems that may be miswired during installation. The IMON output provides a 1% accurate analog current sense for telemetry or closed-loop monitoring. Typical applications include industrial PLC I/O modules, factory automation backplanes, 24-V motor-drive auxiliary rails, telecom -48-V systems, USB PD sink protection, and battery-powered test equipment. The wide 4.5 V to 60 V input envelope covers the broadest industrial bus range. When designing with the TPS26630RGER, follow TI's SLVAE81 layout guide and choose C_in/C_out based on transient and surge profiles. The exposed thermal pad must be soldered to a sufficient copper pour to keep junction temperature within the 125 °C limit. This page synthesizes distributor pricing, drop-in alternatives, and application guidance not found in the manufacturer datasheet alone, helping engineers select, source, and protect industrial rails with a single 4x4 mm IC.

RFQ پەیوەندی
TPS27081A - 8V 3A 44mΩ PFET High-Side Load Switch | Texas Instruments
TPS27081A

TPS27081A - 8V 3A 44mΩ PFET High-Side Load Switch | Texas Instruments

The Texas Instruments TPS27081A is a high-side load switch that integrates a power P-channel MOSFET and a control N-channel MOSFET in a SOT-23-6 (DDC) package, supporting 1.2V to 8V input and up to 3A continuous load current. Its on-resistance is typically 44 mΩ, which minimizes voltage drop across the switch when powering low-voltage, high-current rails. The device includes adjustable rise-time (slew-rate) control via an external resistor on the ODT pin, allowing designers to trade off inrush current against turn-on time. A load switch is a discrete power-management component that sits between a system rail and a downstream load to provide controlled power-up, power-down, and protection functions. In the power-management hierarchy, load switches fall under the broader category of power distribution switches, which themselves belong to power management ICs. They are widely used to add sequencing, inrush control, and isolation to rails that would otherwise be permanently tied to the main supply. Compared with discrete PFET switches, integrated load switches save PCB area and provide consistent timing. Key features include 1.2V to 8V input voltage, 3A continuous current, 44 mΩ typical on-resistance, integrated level shifter that accepts 1V GPIO logic and translates it to VIN levels, on-chip ESD protection on all pins, and a small SOT-23-6 package. The device supports active-high ON/OFF control via a single logic input. The level-shifter architecture lets a 1.2V, 1.8V, 3.3V, or higher MCU control a higher-voltage rail without external translators. The TPS27081A uses TI's PFET/NFET integration to deliver a tiny footprint with low Rds(on). The ODT pin programs the gate slew rate, which directly controls dV/dt and therefore the inrush current when the load is a decoupling-bulk capacitor. Lower ODT resistance yields faster turn-on but higher peak inrush; higher resistance yields softer turn-on. Typical applications include portable and battery-powered systems, SSDs, USB peripheral power rails, point-of-load isolation in multi-rail systems, embedded computing modules, and hot-swap interfaces for low-voltage subsystems. The device is also commonly used to provide sequenced power-up for sub-systems controlled by a host MCU. When designing with this device, place the ODT resistor close to the ODT pin and ensure the input decoupling capacitor sits adjacent to VIN. Verify that peak inrush current does not exceed the upstream supply's transient capability, and derate for ambient temperature using the thermal metrics in the datasheet. This page synthesizes verified distributor pricing, drop-in same-package alternatives from TI's portfolio, comparison parameters, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
TPS27082L - 8V, 3A PFET Load Switch w/ Adj. Slew Rate | TI
TPS27082L

TPS27082L - 8V, 3A PFET Load Switch w/ Adj. Slew Rate | TI

The Texas Instruments TPS27082L is an 8-V, 3-A, 44-mΩ high-side load switch with adjustable rise time, fast transient isolation, and hysteresis control, housed in a 6-pin TSOT-23 (DDC) package. It integrates a power P-channel MOSFET with a control NMOS and supports an input supply range of 1.2 V to 8 V with continuous load current up to 3 A, making it well suited for point-of-load power management in space-constrained designs. A load switch is a discrete or integrated MOSFET-based power switch used to connect or disconnect a downstream load from an upstream voltage rail, replacing mechanical relays or discrete PFET/NMOS designs. Load switches fall under the broader power management hierarchy: load switch → power distribution switch → hot-swap controller / power-path manager, commonly used to sequence rails, isolate transients, and reduce quiescent leakage in battery-powered systems. The TPS27082L's P-channel topology drives the gate from an internal charge pump referenced to VIN, eliminating the need for a higher-voltage bias rail. Key features include a low 44 mΩ on-resistance at VIN = 5 V, configurable inrush slew rate via an external R1/C1 network, fast transient isolation (>40 dB attenuation of VIN step transients when the PFET is OFF), and a hysteretic ON/OFF control threshold to prevent chattering near the switch point. An open-drain Power Good (PGOOD) output is asserted when VOUT reaches approximately 90% of VIN. Quiescent current is held below the [DATA_NEEDED: Iq typical] in the OFF state, optimizing sleep-mode battery life. The architecture uses a single P-channel MOSFET for the main power path and a separate NMOS for level-shifted gate drive. The TPS27082L integrates a controlled soft-start mechanism via the R1/C1 timing network, limiting di/dt at turn-on and therefore the inrush current drawn by downstream bulk capacitors. The hysteretic comparator prevents multiple transitions when VIN ramps slowly through the ON threshold. Typical applications include power distribution in solid-state drives (SSD), hard-disk drives (HDD), notebook and tablet platforms, multi-rail sequencing in industrial PCs, USB port power switching, and battery-powered consumer devices that require sleep-mode isolation. When designing with TPS27082L, place the R1/C1 timing components close to the device pins. Adding a 1 μF C1 can extend rise time significantly and reduce inrush; omit C1 when maximum transient isolation is required at VOUT. This page synthesizes distributor availability, drop-in alternatives, and practical design notes (R1/C1 selection, hysteresis tuning, PGOOD wiring) not found in the manufacturer datasheet alone.

RFQ پەیوەندی
TPS2HB35CQPWPRQ1 - 36A Dual Smart High-Side Switch | TI
TPS2HB35CQPWPRQ1

TPS2HB35CQPWPRQ1 - 36A Dual Smart High-Side Switch | TI

The Texas Instruments TPS2HB35CQPWPRQ1 is a dual-channel, 35-mΩ, 40-V automotive smart high-side switch in a 16-pin HTSSOP (PWP) PowerPAD package, qualified to AEC-Q100 Grade 1. It is intended for 12-V automotive body and chassis loads and integrates two N-channel MOSFETs with a wide VIN range of 6 V to 18 V (36-V load-dump tolerant), continuous current capability up to 36 A per channel, and an adjustable current limit set by an external ISET resistor. This 'C' device variant provides an adjustable current limit, distinguishing it from the 'A' variant's fixed current-limit configuration. A smart high-side switch (HSS) is a power-distribution IC that places a controlled MOSFET between the supply rail and the load, providing over-current protection, inrush control, and diagnostic feedback. It belongs to the broader power-switch product family: power switch -> high-side switch -> smart high-side switch -> power distribution IC -> power management. Compared with discrete MOSFETs plus fuses or PTCs, an HSS IC offers faster, resettable protection, on-chip thermal sensing, and a digital fault output that reduces harness wiring in body-control modules. Key features include reverse-battery blocking via an integrated charge pump and body-diode protection, an open-drain FAULT pin for short-to-ground, short-to-battery, and open-load detection, plus thermal shutdown and auto-retry behavior. The device operates from -40 °C to +125 °C junction temperature and withstands the strict automotive transient envelope (ISO 7637-2 pulse, jump-start, load dump). Typical applications include automotive body modules driving LED lighting, door-lock actuators, seat heaters, and PTC auxiliary heaters, as well as industrial PLC discrete outputs and any multi-load distribution node where diagnostic feedback and resettable protection improve reliability over a discrete solution. When designing with this part, choose ISET to set the inrush limit above the steady-state load current but below the wiring fusing rating; ensure the PCB thermal copper pours meet the HTSSOP theta_JA so that the device recovers from fault conditions without nuisance tripping. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
TPS2HC08-Q1 - 9.5mΩ Dual Smart High-Side Switch | TI
TPS2HC08-Q1

TPS2HC08-Q1 - 9.5mΩ Dual Smart High-Side Switch | TI

The Texas Instruments TPS2HC08-Q1 is a dual-channel automotive smart high-side switch integrating two NMOS power FETs with a charge pump, designed for 12V automotive battery systems. It delivers up to 7.5A DC when both channels are enabled, or 10A DC when only one channel is enabled, with a low on-resistance of 9.5mΩ that minimizes device power dissipation. A smart high-side switch is a power management IC that connects a load to the positive supply rail while integrating protection and diagnostic functions such as current limiting, thermal shutdown, and open-load detection. It replaces discrete MOSFET-plus-driver circuits, simplifying design and improving reliability. In the power management hierarchy, it sits above basic load switches, adding the robust protection and fault reporting demanded by automotive loads. Key features include an operating supply range suited to 12V battery systems during cranking and transient events, an integrated charge pump that ensures low RDS(on) without external components, and low standby quiescent current for battery-connected modules. Protection covers output short circuit, overcurrent, and overtemperature conditions, supporting functional-safety-oriented designs. Architecturally, the TPS2HC08-Q1 combines two NMOS power stages with gate-drive charge pump and protection logic in a compact 11-pin VQFN-HR (2.2x3.6mm) package. The device is AEC-Q100 qualified. Serial diagnostic reporting enables real-time load monitoring with automotive MCUs such as the TI TMS320F280015x or MSPM0 families. Typical applications include automotive body control modules, LED lighting drivers, and actuator drives such as relays, solenoids, and motors, where integrated diagnostics detect wire faults and load failures. For reliable operation, provide adequate PCB copper area under the package at high currents, place decoupling capacitors close to the supply pins, and follow the datasheet layout guidance to minimize parasitic inductance during short-circuit events.

RFQ پەیوەندی
TPS4H000-Q1 - 40V 1Ω Quad High-Side Switch | TI Automotive
TPS4H000-Q1

TPS4H000-Q1 - 40V 1Ω Quad High-Side Switch | TI Automotive

The TPS4H000-Q1 is a fully protected quad-channel smart high-side switch from Texas Instruments, integrating four 1000-mΩ NMOS power FETs with an internal charge pump. Designed for automotive and industrial applications, it operates from a 3.4V to 40V supply and delivers up to 750mA per channel. The device features full diagnostics, high-accuracy current sensing, and an external adjustable current limit, enabling intelligent load control and system protection. A smart high-side switch is a power management IC that connects a load to a positive supply rail through a MOSFET, providing protection and diagnostic functions. It integrates the power switch, driver, and protection circuitry into a single package, replacing discrete MOSFETs and associated components. In the power distribution hierarchy, it sits between the battery or supply rail and the load, acting as a controlled and protected power distribution element. Key features include a wide operating voltage range of 3.4V to 40V, making it suitable for 12V automotive and 24V industrial systems. The integrated 1000-mΩ NMOS FETs minimize conduction losses, while the adjustable current limit allows designers to set the threshold for inrush or overload protection. Full diagnostics provide open-load, short-to-ground, and over-temperature detection, enhancing system reliability. The device uses an internal charge pump to drive the high-side NMOS FETs, eliminating the need for external bootstrap components. The high-accuracy current sense output enables precise load monitoring, which is critical for applications like lighting control and motor management. The TPS4H000-Q1 is qualified to AEC-Q100 for automotive use, ensuring robust performance in harsh environments. Typical applications include automotive body control modules, lighting systems, resistive and inductive loads, and industrial PLC outputs. Its quad-channel configuration saves board space and simplifies PCB layout, while the adjustable current limit provides flexibility for various load requirements. When designing with the TPS4H000-Q1, ensure proper thermal management by connecting the exposed pad to a large copper area. The current sense accuracy depends on the external sense resistor, so choose a precision resistor to maintain accuracy. Also, consider the inrush current of capacitive loads and set the current limit accordingly.

RFQ پەیوەندی
TPS4H000BQPWPRQ1 - 40V 4-Ch Smart High-Side Switch | TI
TPS4H000BQPWPRQ1

TPS4H000BQPWPRQ1 - 40V 4-Ch Smart High-Side Switch | TI

The Texas Instruments TPS4H000BQPWPRQ1 is a 40-V, quad-channel automotive smart high-side power switch with integrated 1000-mOhm NMOS power FETs, housed in a 20-pin HTSSOP (PWP) package with exposed thermal pad. It is AEC-Q100 qualified for automotive applications and provides per-channel adjustable current limiting, high-accuracy current sensing, and full diagnostic reporting. A smart high-side switch is a power distribution switch, part of the load driver and power-management IC hierarchy, that sits between a supply rail and a load, switching the high side of the load while integrating protection and telemetry. Unlike a discrete MOSFET plus driver solution, a smart high-side switch integrates the power FET, gate drive, charge pump, current-sense amplifier, and protection circuits in a single surface-mount device, reducing BOM count and board area. Key differentiating features of the TPS4H000-Q1 family include the external adjustable current limit, which improves system reliability by limiting inrush or overload current; high-accuracy current-sense output for intelligent load control and predictive maintenance; open-load, short-circuit, and thermal fault diagnostics; and a wide 3.4-V to 40-V supply range that tolerates automotive load-dump transients on 12-V rails. Architecturally, each of the four channels uses an integrated NMOS power transistor switched by an internal charge pump, so no external FET drive components are required. The four channels can be controlled independently through IN1-IN4 inputs, with SEL and CS pins providing multiplexed diagnostic and current-sense readout to a microcontroller ADC. The B-grade variant offers the family's specified current-limit characteristics in the automotive temperature range. Typical applications include automotive body-control modules driving relays, lamps, and LED loads; 12-V and 24-V industrial PLC digital output modules; and heating elements or solenoid loads in modules where per-channel fault reporting is mandatory. The 40-V rating covers jump-start and load-dump conditions. Design consideration: because each channel has 1000 mOhm on-resistance, conduction losses are P = I^2 x R; keep per-channel continuous current near the 750-mA rating to limit junction temperature rise, and use the exposed pad soldered to a copper pour for heat spreading. This page synthesizes distributor pricing context, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
TPS4H160AQPWPRQ1 - 40V Quad-Channel Smart High-Side Switch | TI
TPS4H160AQPWPRQ1

TPS4H160AQPWPRQ1 - 40V Quad-Channel Smart High-Side Switch | TI

The Texas Instruments TPS4H160AQPWPRQ1 is a 40-V, 160-mΩ, quad-channel automotive smart high-side switch with adjustable current limit, housed in a 28-pin HTSSOP (PWP) package with PowerPAD. It integrates four N-channel MOSFET power FETs and an internal charge pump to drive the high-side switches, delivering up to 2.5 A continuous current per channel for resistive, inductive, and capacitive loads in 12-V automotive body-electronics systems. A smart high-side switch (a power-distribution switch used to drive ground-referenced loads from the positive supply rail) sits hierarchically above simple MOSFETs and below multi-channel power-management ICs in modern automotive electronic control units. The TPS4H160-Q1 family combines the role of a load driver, in-line protection, and diagnostic sensor in one IC, replacing four discrete high-side MOSFETs plus their gate drivers, current-sense amplifiers, and fault logic. Key features include integrated 160-mΩ Rdson NMOS FETs, an adjustable current-limit threshold set by an external resistor, configurable fault behavior, and two diagnostic-reporting variants (A and B). Full diagnostics with high-accuracy current-sense output enable intelligent load control, while protection features cover short-to-ground, short-to-battery, over-current, over-temperature, and open-load detection. The device operates from 4 V to 40 V and supports AEC-Q100 Grade 1 automotive qualification. The architecture uses an internal charge pump to fully enhance the four N-channel MOSFETs for true low-Rdson high-side switching, while an integrated sense-FET provides proportional load-current feedback on the CS pin. Two diagnostic variants are offered: the TPS4H160A (open-drain fault reporting) and the TPS4H160B (current-sense analog output) - both share identical pinout and footprint for design reuse. Typical applications include automotive body-control modules, HVAC actuators, LED lighting drivers, seat-control modules, and IO-Link master digital-output stages. The high-accuracy current sense and adjustable current limit make it ideal for systems that must detect partial shorts or bulb-out conditions without external sense resistors. When designing with this device, derate per channel based on PCB copper area and ambient temperature - the HTSSOP PowerPAD is the primary thermal path. Avoid placing the device near heat sources; ensure the exposed pad is soldered to a sufficiently large copper pour. The current-limit resistor sets the trip point and must be chosen using TI's TPS4H160-Q1 datasheet design equations, not extrapolated from generic high-side switch curves. This page synthesizes distributor pricing, AEC-Q100 compliance notes, same-family pin-compatible variants (TPS4H000AQPWPRQ1, TPS4H160BQPWPRQ1), and practical PCB design guidance not collected in any single manufacturer document.

RFQ پەیوەندی
TPS65217CRSLR - Single-Chip PMIC for AM335x ARM Cortex-A8 | Texas Instruments
TPS65217CRSLR

TPS65217CRSLR - Single-Chip PMIC for AM335x ARM Cortex-A8 | Texas Instruments

The Texas Instruments TPS65217CRSLR is a single-chip power management IC (PMIC) specifically designed to power the AM335x ARM Cortex-A8 microprocessor in portable and 5-V line-powered applications, integrating 3 step-down DC/DC converters, 4 low-dropout (LDO) regulators, a linear Li-ion/Li-polymer battery charger, dual-input power path management, and a high-efficiency white-LED boost driver, all in a 48-pin VQFN (RSL) 6x6 mm package with 0.4 mm pitch. The device operates over an ambient temperature range of -40C to +105C, supports an input voltage up to 5.5 V from USB, AC adapters, or battery sources, and provides sequenced power rails with I2C control and status indication. The RSL suffix denotes the 48-pin leadless package, while the production-grade operating range and feature set make the part well suited to industrial handheld designs, point-of-sale terminals, and consumer mobile devices based on the TI Sitara AM335x platform. A PMIC (Power Management Integrated Circuit) is a single silicon device that consolidates multiple voltage regulators, battery management functions, and often ancillary drivers (LED, USB, RTC) into one package. Compared with discrete regulator solutions, a PMIC reduces PCB area, simplifies power sequencing, improves system efficiency, and provides unified fault protection. PMICs sit in the broader hierarchy of power management ICs, alongside voltage regulators, supervisors, and battery management ICs, and are the standard architectural choice for modern battery-powered processors, SoCs, and FPGAs. Key features of the TPS65217CRSLR include light-load efficiency mode for extending battery life, output discharge on disable, output voltage tracking between rails for inrush control, an operating-status indication pin, and integrated overcurrent protection. Three DC/DC converters can be configured for the AM335x core, memory, and I/O rails; the four LDOs supply peripherals such as PLL, audio codec, and MMC. A built-in linear charger supports single-cell Li-ion/Li-polymer batteries with thermal regulation, and the white-LED driver can backlight small LCD panels. From a system architecture standpoint, the TPS65217CRSLR interfaces to the AM335x via I2C for output-voltage trimming, enable control, and fault readback. Internal sequencers enforce power-up and power-down ordering to prevent latch-up; under-voltage, over-voltage, and thermal-shutdown protections are integrated. The 48-pin VQFN package exposes an exposed thermal pad that must be soldered to a sufficient copper pour for heat dissipation in high-load conditions. Typical applications include BeagleBone Black single-board computers and other AM335x-based designs, portable industrial terminals, handheld medical devices, e-readers, smart-home gateways, and consumer electronics that require battery operation plus 5-V line power. Designers often pair the TPS65217CRSLR with companion TI parts such as the AM335x Cortex-A8 microprocessor and TPS2051B USB power switch. When designing with this part, carefully review the AM335x power-rail requirements (VDD_CORE, VDD_MPU, VDDS_DDR, etc.) and configure the DC/DCs and LDOs accordingly. The exposed pad must be soldered to a ground copper pour of at least 25 mm x 25 mm with multiple thermal vias to keep junction temperature within ratings at full load.

RFQ پەیوەندی
TPS65988DDK - Dual-Port USB Type-C PD Controller | Texas Instruments
TPS65988DDK

TPS65988DDK - Dual-Port USB Type-C PD Controller | Texas Instruments

The Texas Instruments TPS65988DDK is a stand-alone dual-port USB Type-C and USB Power Delivery (PD) controller with integrated power switches, housed in a 56-pin VQFN (7x7 mm) package. It is certified by the USB-IF for PD3.0 (TID#: 1099) and supports sourcing and sinking up to 20 V at 5 A per port, while exposing DisplayPort and USB4 alternate-mode signaling paths. The part integrates 25 mOhm bidirectional load-switch FETs, eliminating external power-path discretes in compact Type-C implementations. A USB Type-C and Power Delivery controller is a specialized power management IC that negotiates voltage, current, and role (source/sink) over the USB Type-C Configuration Channel (CC) lines using the USB PD protocol. Within the broader semiconductor hierarchy it sits inside the power management IC family, alongside LDOs, DC/DC converters, and battery chargers, but it is functionally distinct because it owns the protocol state machine, policy engine, and physical-layer (PHY) logic defined by the USB Implementers Forum. Pairing the PD controller with downstream power stages or load switches produces a complete USB-C port solution. Key features of the TPS65988DDK include USB PD 3.0 compliance with fast role swap, integrated 5 A bidirectional power switches, support for DisplayPort and USB4 alternate modes, configurable boot or host-controlled modes, and I2C/SPI host interface for policy updates. Robust protection features include over-voltage, over-current, over-temperature, and reverse-current blocking on the VBUS path, allowing safe hot-plug behavior in laptops, docks, and monitors. Typical applications include dual-port USB-C docking stations, Thunderbolt 4 / USB4 hosts, gaming monitors with USB-C input, industrial PCs, and any system that must route 20 V / 5 A from a Type-C connector while supporting alternate-mode video. The wide VBUS range and integrated mux control reduce external component count and simplify PCB layout for slim platforms. When designing with the TPS65988DDK, careful attention must be paid to VBUS capacitance budgets (USB PD spec limits the inrush charge) and to CC-pin pull-up/pull-down choices that set the default role (sink vs source). Firmware configuration is typically supplied through external EEPROM, and GPIOs are reserved for control of external DC/DC converters and high-speed data muxes. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
TPS66020YBGR - 20V Sink and 5V Source Switch | Texas Instruments
TPS66020YBGR

TPS66020YBGR - 20V Sink and 5V Source Switch | Texas Instruments

The Texas Instruments TPS66020YBGR is a full-featured USB-C power-path multiplexer with a 5 V source path, a 4 V to 22 V sink path, and a 3.3 V dead-battery LDO, housed in a 28-pin DSBGA (YBG) package measuring 1.61 mm by 2.81 mm. It is designed for compact USB Type-C power management where controlled source current, reverse-current protection, overtemperature protection, and fault reporting are important. According to the Texas Instruments product page, the 5 V source path enters constant-current operation when the load exceeds its selected current-limit threshold. A USB-C power-path multiplexer is a specialized power-management semiconductor that coordinates power entering or leaving a USB-C device through controlled internal pathways. It sits within the hierarchy of power switch, power-path controller, USB Type-C power controller, and power-management IC. Instead of directly connecting every supply rail, the device applies current limits and protection functions before transferring VBUS power, helping the connected source, sink, charger, and system load operate predictably during attach, detach, fault, and dead-battery conditions. The verified device information identifies a 4 V to 22 V sink range and a regulated 5 V source capability. The sink path accepts higher-voltage USB-C source power, while the source path supports a lower-voltage supply and limits current when demand becomes excessive. The integrated 3.3 V dead-battery LDO supplies the device and other system components under dead-battery conditions. A fault signal indicates overcurrent and overtemperature events, enabling the host controller to recognize abnormal operating conditions. Each power path supports overtemperature and reverse-current protection according to the manufacturer product page. These functions address common connector and power-path hazards, including current flowing toward an unintended rail and thermal stress during an overload. The source path’s selectable current-limit behavior lets the design constrain output current rather than relying only on downstream protection. Exact threshold, timing, efficiency, and absolute-limit values are not present in the supplied excerpts and require confirmation in the manufacturer datasheet. Typical uses include USB-C docking stations, notebooks and tablets, portable electronics, industrial USB-C equipment, battery-powered systems, and dead-battery recovery circuits. In a sink design, the TPS66020YBGR can route VBUS power into the system while limiting risk from reverse flow. In a source design, its 5 V path can provide a protected output to a downstream USB-C load. The 1.61 mm by 2.81 mm DSBGA also demands careful PCB layout, ball inspection, assembly-profile control, and thermal-path design. Designers should use the TI datasheet for the complete YBG land pattern, pin definitions, timing, electrical limits, and recommended external components. Input and power-path nodes should be kept compact, while fault and control traces should remain short and isolated where possible. This page synthesizes the verified source and sink architecture, distributor listing, package information, and practical integration considerations without inventing missing electrical parameters. Engineers evaluating a replacement should compare pin mapping, current-limit settings, VBUS voltage behavior, dead-battery LDO voltage, fault signaling, and protection functions—not merely package dimensions. Because the verified data does not establish a pin-to-pin substitute, cross-reference results should be treated as review leads until manufacturer documentation confirms compatibility. Verified pricing and stock references reflect the supplied sources as of 2026-10-22.

RFQ پەیوەندی
TPS66120YBGR - 22V USB-C Sink Power Switch | Texas Instruments
TPS66120YBGR

TPS66120YBGR - 22V USB-C Sink Power Switch | Texas Instruments

The Texas Instruments TPS66120YBGR is a USB-C Power Delivery high-voltage power switch for a sink with a 3.3 V dead-battery LDO, featuring an integrated 4 V to 22 V sink power path and a 28-pin DSBGA package measuring 1.61 mm by 2.81 mm. Its power path supports overtemperature and reverse-current protection, while VBUS overvoltage protection is configurable through an optional external resistor divider. These characteristics position it as a power-management IC for USB-C devices that must negotiate a power contract and safely distribute VBUS power during normal operation, fault handling, and dead-battery startup. A USB-C Power Delivery sink is the receiving side of a USB Type-C connection. The source supplies VBUS power, while the sink detects attachment, participates in power-role and power-contract negotiation, controls current flow, and protects its downstream system from unsafe voltage or current conditions. A sink power switch adds a controlled power path and protection functions; an LDO supplies a stable auxiliary rail. In the broader component hierarchy, the TPS66120 combines a USB-C interface, power switch, protection circuit, and low-dropout regulator within a single power-management device. The supplied manufacturer information identifies the TPS66120 series as a single-channel special-purpose switch IC with a 4 V to 22 V integrated sink path. It also documents a high-voltage VBUS LDO that can supply the device and other system components during dead-battery conditions. A fault signal indicates overtemperature events, enabling the host controller to detect a thermal shutdown rather than continuing to request unavailable power. The operating-temperature range shown on the official ordering page is -10 °C to 85 °C. The device is particularly relevant to compact USB-C power-acceptor designs where board area is constrained. Its 1.61 mm by 2.81 mm 28-ball DSBGA can reduce routing congestion around a USB-C connector and power-management circuitry, although fine-pitch assembly and inspection require capable PCB processes. The sink power path separates externally presented VBUS from downstream circuitry, while overtemperature and reverse-current protections address conditions that could otherwise stress system components. Typical uses include USB-C-connected battery chargers, portable instruments, industrial data loggers, battery-powered test equipment, and embedded systems that receive power through a USB-C port. The 3.3 V auxiliary LDO is useful when the downstream controller or external components need a stable rail even before the system’s main battery chemistry becomes operational. For automotive, medical, or extended industrial products, verify the full electrical limits, qualification status, and production lifecycle independently rather than inferring suitability from the commercial temperature grade alone. Designers should follow the manufacturer datasheet for VBUS capacitor selection, optional overvoltage-divider values, enable sequencing, fault handling, exposed-ball layout, and recommended PCB construction. In particular, preserve creepage and clearance around USB-C VBUS nodes and validate system behavior across source-capability advertisements, dead-battery startup, thermal stress, and unplug events. This page consolidates the verified ordering information, distributor observations, and cross-reference findings into an engineering-focused product record rather than adding unverified electrical or lifecycle claims.

RFQ پەیوەندی
TPS7H6200-SEP - 52A Rad-Tolerant GaN Half-Bridge | Texas Instruments
TPS7H6200-SEP

TPS7H6200-SEP - 52A Rad-Tolerant GaN Half-Bridge | Texas Instruments

The Texas Instruments TPS7H6200-SEP is a radiation-tolerant 52 A GaN half-bridge power stage with integrated low-side current sense, combining a silicon gate-driver die and a half-bridge GaN die on a single substrate. It is a 15 V e-mode GaN power-FET with integrated gate driver, tri-state PWM compatibility, integrated low-side current sense, overtemperature protection, and overcurrent protection, optimized for synchronous-buck converters stepping 12 V down to sub-1 V point-of-load supplies. A GaN half-bridge power stage is a highly integrated building block that packages the high-side and low-side switches of a synchronous buck converter together with their gate drivers, eliminating the parasitic inductance that limits switching performance in discrete buck designs. By integrating the GaN FETs onto a single die and co-packaging the driver, the TPS7H6200-SEP achieves faster switching edges, lower dead-time losses, and a much smaller PCB footprint than equivalent discrete silicon implementations. It belongs to the broader category of power management integrated circuits and is positioned at the high-performance tier of point-of-load (POL) regulators for satellite, aerospace, and defense power-conversion systems. Key features include 52 A continuous per half-bridge output capability, integrated low-side current sensing for telemetry and cycle-by-cycle protection, tri-state PWM input compatible with standard controller ICs, built-in overtemperature and overcurrent protection, and radiation-tolerant construction for low-earth-orbit and geostationary missions. The co-packaged GaN die minimizes loop inductance between high-side and low-side devices, which directly improves switching efficiency at high di/dt. Typical applications include radiation-tolerant point-of-load converters for space-grade FPGA core rails, satellite command-and-data-handling subsystems, distributed 12 V intermediate bus converters, and high-current synchronous-buck POL stages for processors and ASICs. Two TPS7H6200-SEP devices can be paralleled with the TPS7H5101-SEP controller to scale to 80 A, with additional phases for 160 A and beyond. When laying out this device, keep the input decoupling loop as small as possible and follow the land pattern and thermal via array shown in the manufacturer datasheet. The low-side current-sense output is referenced to the source of the low-side FET and must be conditioned externally before being fed back to the controller. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that supplement the manufacturer datasheet with engineering-oriented context for power-stage selection in space-grade and high-reliability POL designs.

RFQ پەیوەندی
UCC20225QNPLRQ1 - Automotive 4A/6A Dual Isolated Gate Driver | TI
UCC20225QNPLRQ1

UCC20225QNPLRQ1 - Automotive 4A/6A Dual Isolated Gate Driver | TI

The Texas Instruments UCC20225QNPLRQ1 is an automotive-grade (AEC-Q100 qualified) isolated single-input, dual-output gate driver with 4-A source and 6-A sink peak current, housed in a 13-pin VLGA (NPL) 5-mm x 5-mm package. It is designed to drive power transistors up to 5-MHz with best-in-class propagation delay and pulse-width distortion, and provides a 2.5-kV RMS reinforced isolation barrier between the input side and the two output drivers. A gate driver is a power amplifier that accepts a low-power logic-level PWM command from a controller and produces the high-current drive signal required to switch a power MOSFET, IGBT, or GaN/SiC transistor. Isolated gate drivers add a galvanic isolation barrier between the low-voltage control domain and the high-voltage power domain, protecting the controller and meeting safety creepage/clearance requirements in high-voltage systems. The UCC20225QNPLRQ1 sits inside the broader hierarchy of gate driver -> power management IC -> semiconductor, and is specifically tuned for high-side/low-side or half-bridge topologies with a single PWM input. Key features include 4-A source / 6-A sink peak drive, 30-ns typical propagation delay, 5-ns maximum channel-to-channel delay matching, minimum 100-V/ns common-mode transient immunity (CMTI), and an 8-V undervoltage lockout (UVLO) optimized for automotive 48-V systems. The VLGA-13 footprint occupies only 25 mm^2 of board area, enabling compact half-bridge and bootstrap designs in tight enclosures. The architecture combines a single CMOS/digital input with two independently isolated output channels, each capable of sinking/sourcing gate charge at MHz switching speeds. An integrated dead-time control feature and the 8-V UVLO threshold make this part particularly well-suited to automotive 48-V traction, OBC, and DC-DC converter stages using GaN or Si MOSFETs that need tight threshold management to prevent partial turn-on. Typical applications include 48-V mild-hybrid DC-DC converters, traction inverter gate-drive stages, on-board chargers (OBC), and isolated half-bridge power stages for industrial motor drives. Its 8-V UVLO specifically targets the 12-V class gate-drive rails common in 48-V automotive systems. When designing with this driver, place the bootstrap diode and capacitor directly adjacent to the high-side output pins to minimize parasitic inductance; insufficient decoupling on VDD can couple switching noise back into the logic input and cause spurious UVLO events at high dV/dt. This page synthesizes distributor pricing, drop-in alternatives, automotive 48-V application notes, and pin-by-pin design considerations beyond the manufacturer datasheet summary, helping power engineers accelerate ISO 26262-compliant design reviews.

RFQ پەیوەندی
UCC21520 - 4A/6A 5.7kVRMS Isolated Dual Gate Driver | TI
UCC21520

UCC21520 - 4A/6A 5.7kVRMS Isolated Dual Gate Driver | TI

The Texas Instruments UCC21520 is an isolated dual-channel gate driver delivering 4-A source and 6-A sink peak output current, engineered to drive power MOSFETs, IGBTs, and SiC MOSFETs at switching frequencies up to 5 MHz with 5.7-kVRMS reinforced isolation in a 16-pin SOIC (DW) package. An isolated gate driver is an IC that combines galvanic isolation and signal amplification between a low-voltage controller and high-voltage power switches. Within the power management IC hierarchy, it sits between logic-level drivers and full gate-drive optocoupler solutions, enabling safe control of high-side and low-side switches in half-bridge, full-bridge, and LLC topologies. Key features include a wide VDD range of 6.5V to 25V, TTL/CMOS-compatible input thresholds, a DIS disable pin for output control, and UVLO protection on all supply pins. The device achieves a 19-ns propagation delay and 6-ns pulse-width distortion, best-in-class figures that preserve PWM accuracy at high switching frequencies. Technically, the UCC21520 uses TI capacitive isolation technology providing 100 V/ns common-mode transient immunity (CMTI), which prevents false triggering from fast dv/dt switching edges typical of SiC and GaN power stages. Programmable dead time via resistor setting and interlock function prevent shoot-through in bridge configurations. Typical applications include solar inverters, motor drives, EV charging and on-board chargers, isolated DC-DC converters, and UPS power stages, where high peak current efficiently charges large gate capacitances. Design tip: provide tight VDDA/VDDB decoupling and minimize gate-loop parasitic inductance; PCB layout critically affects realized CMTI and gate ringing performance.

RFQ پەیوەندی
UCC21520Q-Q1 - 4A/6A 5.7kVRMS Isolated Dual Gate Driver | TI
UCC21520Q-Q1

UCC21520Q-Q1 - 4A/6A 5.7kVRMS Isolated Dual Gate Driver | TI

The Texas Instruments UCC21520Q-Q1 is an AEC-Q100 qualified, isolated dual-channel gate driver delivering 4-A source and 6-A sink peak output current. It drives power MOSFETs, IGBTs, and SiC MOSFETs at switching frequencies up to 5 MHz, with a 5.7 kVRMS reinforced capacitive isolation barrier providing a minimum of 125 V/ns common-mode transient immunity (CMTI). The device comes in a 16-pin wide-body SOIC (DW) surface-mount package. An isolated gate driver is a power-management IC that transfers a low-voltage logic-level PWM signal across a galvanic isolation barrier to drive the gate of a power semiconductor floating at high voltage. Within the signal-chain hierarchy, it sits between the PWM controller or microcontroller and the power stage, combining the functions of a logic buffer, level shifter, and isolation barrier in a single device. Key features include best-in-class propagation delay and pulse-width distortion, TTL- and CMOS-compatible input thresholds on INA, INB, and DIS pins that are independent of VDD, under-voltage lockout (UVLO) protection on all supply pins, and flexible dual-input configuration that allows the device to fit half-bridge, full-bridge, and dual low-side or high-side topologies. The 8-V UVLO variant ensures gate-drive integrity with SiC MOSFETs that require higher gate-source thresholds. The capacitive isolation architecture uses an on-chip SiO2 barrier delivering reinforced isolation rated at 5.7 kVRMS, supporting functional safety requirements in automotive traction inverters, onboard chargers, and high-voltage servo drives. High CMTI tolerance allows reliable operation in the presence of fast dv/dt switching edges typical of GaN and SiC power stages. Typical applications include automotive traction inverters, 48 V and high-voltage DC-DC converters, onboard chargers, solar string inverters, and industrial motor drives using SiC or IGBT power modules. When designing, verify that the VDDA/VDDB UVLO threshold matches the gate-drive voltage requirements of the selected power switch, and keep the gate-drive loop inductance minimal with closely coupled return paths.

RFQ پەیوەندی
UCC21521 - 4A/6A 5.7kVrms Isolated Gate Driver | TI
UCC21521DWR

UCC21521 - 4A/6A 5.7kVrms Isolated Gate Driver | TI

The Texas Instruments UCC21521 is an isolated dual-channel gate driver with 4-A source and 6-A sink peak output current, designed to drive power MOSFETs, IGBTs, and SiC MOSFETs at switching frequencies up to 5 MHz. It provides a reinforced isolation barrier of 5.7-kV RMS with at least 100-V/ns common-mode transient immunity (CMTI) in a 16-pin SOIC (DW) package. An isolated gate driver is a power management IC that translates low-voltage control logic into the high gate-drive current required to switch power transistors while maintaining galvanic isolation between controller and power stage. Within the power electronics hierarchy it sits between PWM controllers (DSPs, microcontrollers) and the power semiconductors they control, and is essential for safety and noise immunity in high-voltage converters. Key features include 19-ns typical propagation delay, 10-ns minimum pulse width, 5-ns maximum delay matching, and 6-ns maximum pulse-width distortion. These timing parameters enable precise, synchronized switching that reduces switching losses and EMI. Programmable dead time prevents shoot-through in half-bridge configurations, and the DIS enable pin supports power sequencing and fault protection. The UCC21521 uses TI capacitive isolation technology delivering CMTI of at least 100 V/ns for reliable operation in high-dv/dt environments such as SiC-based converters. Input pins use TTL and CMOS-compatible thresholds, allowing direct interface with 3.3-V microcontrollers and DSPs. The universal architecture supports dual low-side, dual high-side, or half-bridge driver configurations, and the device operates from -40C to +125C. Typical applications include motor drives, solar inverters, EV onboard chargers, and isolated DC-DC converters, where the 4-A/6-A drive strength and 5-MHz capability suit SiC MOSFET and IGBT power stages. Design tip: place decoupling capacitors close to VCCI and VDDA/VDDB pins and minimize gate-loop parasitic inductance to achieve specified timing performance and avoid dv/dt-induced false triggering.

RFQ پەیوەندی
UCC21521ADW - 4A/6A 5.7kVrms Isolated Gate Driver | TI
UCC21521ADW

UCC21521ADW - 4A/6A 5.7kVrms Isolated Gate Driver | TI

The Texas Instruments UCC21521ADW is a 4-A source / 6-A sink dual-channel isolated gate driver with 5.7-kVRMS galvanic isolation, capacitive coupling, an enable pin, programmable dead time, and 8-V UVLO, housed in a 16-pin SOIC (DW) package. An isolated gate driver is a power management IC that translates low-voltage logic signals across a galvanic isolation barrier to drive the gate of a power semiconductor such as a MOSFET, SiC FET, or IGBT. Within the power-supply and motor-control hierarchy, it sits between the PWM controller or microcontroller and the power stage, providing both the high peak currents needed for fast switching and the reinforced isolation needed for safety and level shifting. Key features include the universal configuration supporting dual low-side, dual high-side, or half-bridge operation, fast 19-ns typical propagation delay, 10-ns minimum input pulse width, and 5-ns maximum interchannel delay matching. The 4-A/6-A asymmetric source/sink drive accelerates turn-off to reduce switching losses in hard-switched converters. A programmable dead-time feature prevents shoot-through in half-bridge topologies, and the enable pin allows global shutdown for fault handling. The device uses TI capacitive isolation technology with a 5700-Vrms working isolation rating and 8-V undervoltage lockout on the output-side supply to guarantee complete gate enhancement before operation. Operating temperature spans -40C to +125C, supporting industrial power conversion, motor drives, solar inverters, and on-board chargers. Typical applications include half-bridge and full-bridge stages in server and telecom power supplies, three-phase inverters in motor drives, and isolated DC-DC converters where fast, precisely matched gate drive improves efficiency. For design, ensure the output-side VDD meets the 8-V UVLO threshold with adequate local decoupling, and size the dead time for the target power switch. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی