ZM5304Ax-CME3
ZM5304Ax-CME3 - Z-Wave 908MHz Transceiver Module | Silicon Labs
The Silicon Labs ZM5304Ax-CME3 is a fully self-contained Z-Wave transceiver module operating in the 908 MHz ISM band, built around the Sigma Designs SD3503 Z-Wave 500-series modem IC and integrating a built-in antenna for surface-mount PCB integration. The module delivers up to +4 dBm transmit output power and -103 dBm receiver sensitivity, enabling robust wireless mesh links in Z-Wave home-control and monitoring networks. The device operates from a single 2.3 V to 3.6 V supply rail and exposes a serial interface to the host through a 12-pin surface-mount land pattern. The "Ax" suffix identifies the 908 MHz US/Canada/ANZ regional variant.
A Z-Wave transceiver module is a pre-certified wireless subsystem that bundles an RF transceiver, a network protocol stack, and a built-in antenna into a single reflow-compatible component. Within the broader taxonomy, the ZM5304 sits as a sub-module category in the RF module family, itself a branch of RF & wireless components for short-range personal-area networking and home-area sub-GHz mesh networking. Modules of this class remove the burden of RF matching, antenna tuning, and regulatory pre-compliance testing from the OEM designer.
Key features include on-board Z-Wave 500-series protocol stack handling MAC/PHY and mesh routing, FCC modular approval under part 15 limits plus pre-scanned CE conformance, deep-sleep current below 50 uA for battery-powered nodes, and a built-in chip antenna that supports a 30-50 m typical in-home range. The exposed pads align with the industry-standard ZM5304 footprint, enabling drop-in upgrade paths from prior Z-Wave 300/400-series modules without board rework.
The ZM5304Ax-CME3 architecture pairs the SD3503 modem SoC with an internal PA, LNA, TCXO and PCB antenna; the modem runs the Z-Wave protocol library via firmware loaded from an external host or optional on-module flash. Internal mesh routing handles up to 232 hops, supporting large multi-story smart-home installations.
Typical applications include Z-Wave smart-home gateways, door/window sensors, smart lighting dimmers, smart locks, and water-leak detectors. The compact surface-mount form factor also serves battery-powered HVAC thermostats and energy-harvesting switch nodes.
When designing with the ZM5304Ax-CME3, observe the keep-out zone underneath and around the chip antenna; place no copper, traces, or ground plane within 5 mm of the antenna pad to avoid detuning. Use a 4-layer or 2-layer board with a continuous ground reference and follow Sigma Designs reference layout AN-2014-007 for best RF yield.
This page synthesizes distributor pricing, drop-in alternative sourcing, and practical RF layout guidance not found on the manufacturer product page, helping engineers accelerate Z-Wave node design and second-source qualification.
RFQ
پەیوەندی