MAX3483ESA+ vs SN65HVD37D بەراوردکردن

بەراوردکردنی وردی لایەن بە لایەن لە MAX3483ESA+ لەلایەن Maxim Integrated و SN65HVD37D لەلایەن Texas Instruments. تایبەتمەندییە سەرەکییەکان، پارامیتەرە کارەباییەکان، پاکێجکردن، دۆخی چرخەی ژیان، نرخ و بەردەستبوون بەراورد بکە بۆ دیاریکردنی باشترین پێکھێنەر بۆ پێداویستییەکانی دیزاینەکەت.

Maxim Integrated
MAX3483ESA+ MAX3483ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3483ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3483ESA+ ✓ چالاک
Texas Instruments
SN65HVD37D SN65HVD37D - 3.3V Full-Duplex RS-485 Transceiver | TI (Tape & Reel)

SN65HVD37D - 3.3V Full-Duplex RS-485 Transceiver | TI (Tape & Reel)

SN65HVD37D ✓ چالاک

بەراوردکردنی تایبەتمەندییەکان

پارامەتر MAX3483ESA+ SN65HVD37D
براند Maxim Integrated Texas Instruments
پۆل Interface ICs Interface ICs
دۆخی چرخەی ژیان چالاک چالاک
Product Type RS-485/RS-422 transceiver —
ڤۆڵتیەی دابینکردن 3.3 V —
Verified Supply Range 3 V to 3.6 V —
Maximum Data Rate 10 Mbps —
Driver and Receiver Count 1 driver and 1 receiver —
Duplex Mode Half-duplex —
Interface Standards RS-485 and RS-422 —
Driver Architecture Slew-rate limited —
EMI Control Slew-rate limitation reduces EMI and reflections —
Low-Speed Error-Free Transmission Up to 250 kbps —
Power Architecture 3.3V-powered, low-power transceiver —
پاکێج 8-SOIC 14-SOIC (D), 0.154" / 3.90 mm width
جۆری دامەزراندن Surface mount Surface Mount
Operating Voltage 3 V to 3.6 V —
ESD Protection [DATA_NEEDED: ESD protection rating for MAX3483ESA+] —
مەودای پلەی گەرمیی کارکردن [DATA_NEEDED: operating temperature range] —
ئێستای دابینکردن [DATA_NEEDED: supply current] —
Receiver Output Type [DATA_NEEDED: receiver output type] —
Termination Requirement [DATA_NEEDED: termination and biasing details] —
دۆخی RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
Device Type — Transceiver (1 driver / 1 receiver)
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1 / 1
Duplex — Full
Supply Voltage (VCC) — 3 V to 3.6 V (nominal 3.3 V)
Signaling Rate — Up to 25 Mbps
Receiver Unit Load — 1/8 unit load (up to 256 nodes)
Bus-Pin ESD Protection (HBM) — >15 kV HBM
Receiver Hysteresis — 60 mV (typical)
Quiescent Current (active) — 1 mA (typical)
Standby / Shutdown Current — <1 uA (typical)
پلەی گەرمیی کارکردن — -40 C to +85 C
RoHS / Lead-Free — RoHS compliant, lead-free (per TI product page)
Fail-Safe Receiver — Yes (idle/open/short safe)
Driver / Receiver Enable — Independent DE and RE pins

داتاشیت و سەرچاوەکان

گەڕان بەناو ھەموو بەرھەمەکاندا دروستکردنی BOM داواکردنی نرخ