MAX3485EPA+ vs MAX3485CPA+ بەراوردکردن

بەراوردکردنی وردی لایەن بە لایەن لە MAX3485EPA+ لەلایەن Analog Devices و MAX3485CPA+ لەلایەن Maxim Integrated. تایبەتمەندییە سەرەکییەکان، پارامیتەرە کارەباییەکان، پاکێجکردن، دۆخی چرخەی ژیان، نرخ و بەردەستبوون بەراورد بکە بۆ دیاریکردنی باشترین پێکھێنەر بۆ پێداویستییەکانی دیزاینەکەت.

Analog Devices
MAX3485EPA+ MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ ✓ چالاک
Maxim Integrated
MAX3485CPA+ MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ ✓ چالاک

بەراوردکردنی تایبەتمەندییەکان

پارامەتر MAX3485EPA+ MAX3485CPA+
براند Analog Devices Maxim Integrated
پۆل Interface ICs Interface ICs
دۆخی چرخەی ژیان چالاک چالاک
Product Type RS-485/RS-422 interface transceiver RS-485/RS-422 transceiver
Supply Voltage Range 3 V to 3.6 V —
Transmission Data Rate Up to 10 Mbps —
Driver Count 1 —
Receiver Count 1 —
Supported Standards RS-422 and RS-485 —
Driver Protection Short-circuit current limiting and thermal shutdown —
Driver Output State During Thermal Shutdown High impedance —
Driver Slew Control Slew-rate limited —
Receiver Fail-Safe Feature Yes —
پاکێج 8-pin PDIP 8-pin PDIP
جۆری دامەزراندن Through-hole Through hole
Operating Voltage 3.3 V nominal —
Power Dissipation [DATA_NEEDED: power dissipation specification] —
پلەی گەرمیی کارکردن [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
ESD Protection [DATA_NEEDED: ESD protection rating] [DATA_NEEDED: device ESD rating]
دۆخی RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
ڤۆڵتیەی دابینکردن — 3.3 V
خێرایی داتا — Up to 10 Mbps
Driver and Receiver Count — 1 driver and 1 receiver
Communication Standard — RS-485 and RS-422
Driver Architecture — Slew-rate limited
Transceiver Configuration — Half-duplex transceiver
Low-Power Operation — 3.3 V low-power transceiver
EMI and Reflection Control — Slew-rate-limited driver intended to minimize EMI and cable reflections
ئێستای دابینکردن — [DATA_NEEDED: typical and maximum supply current]
Driver Differential Output — [DATA_NEEDED: differential output voltage specifications]
Receiver Input Range — [DATA_NEEDED: receiver differential input range]
Common-Mode Range — [DATA_NEEDED: receiver common-mode voltage range]
Slew Rate — [DATA_NEEDED: driver slew-rate value]

داتاشیت و سەرچاوەکان

گەڕان بەناو ھەموو بەرھەمەکاندا دروستکردنی BOM داواکردنی نرخ