MAX3485EPA+ vs MAX3485CPA+ موازنہ

تفصیلی ساتھ ساتھ موازنہ از MAX3485EPA+ بذریعہ Analog Devices اور MAX3485CPA+ بذریعہ Maxim Integrated. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔

Analog Devices
MAX3485EPA+ MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ ✓ فعال
Maxim Integrated
MAX3485CPA+ MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ ✓ فعال

خصوصیات کا موازنہ

پیرامیٹر MAX3485EPA+ MAX3485CPA+
برانڈ Analog Devices Maxim Integrated
زمرہ Interface ICs Interface ICs
لائف سائیکل کی حالت فعال فعال
Product Type RS-485/RS-422 interface transceiver RS-485/RS-422 transceiver
Supply Voltage Range 3 V to 3.6 V —
Transmission Data Rate Up to 10 Mbps —
Driver Count 1 —
Receiver Count 1 —
Supported Standards RS-422 and RS-485 —
Driver Protection Short-circuit current limiting and thermal shutdown —
Driver Output State During Thermal Shutdown High impedance —
Driver Slew Control Slew-rate limited —
Receiver Fail-Safe Feature Yes —
پیکیج 8-pin PDIP 8-pin PDIP
ماؤنٹنگ ٹائپ Through-hole Through hole
Operating Voltage 3.3 V nominal —
Power Dissipation [DATA_NEEDED: power dissipation specification] —
آپریٹنگ درجہ حرارت [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
ESD Protection [DATA_NEEDED: ESD protection rating] [DATA_NEEDED: device ESD rating]
RoHS اسٹیٹس [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
سپلائی وولٹیج — 3.3 V
ڈیٹا ریٹ — Up to 10 Mbps
Driver and Receiver Count — 1 driver and 1 receiver
Communication Standard — RS-485 and RS-422
Driver Architecture — Slew-rate limited
Transceiver Configuration — Half-duplex transceiver
Low-Power Operation — 3.3 V low-power transceiver
EMI and Reflection Control — Slew-rate-limited driver intended to minimize EMI and cable reflections
سپلائی کرنٹ — [DATA_NEEDED: typical and maximum supply current]
Driver Differential Output — [DATA_NEEDED: differential output voltage specifications]
Receiver Input Range — [DATA_NEEDED: receiver differential input range]
Common-Mode Range — [DATA_NEEDED: receiver common-mode voltage range]
Slew Rate — [DATA_NEEDED: driver slew-rate value]

Datasheets اور وسائل

تمام مصنوعات براؤز کریں BOM بنائیں قیمت کی درخواست کریں