MAX3485EPA+ vs MAX3485CPA+ तुलना

विस्तृत दोनों ओर की तुलना MAX3485EPA+ द्वारा Analog Devices और MAX3485CPA+ द्वारा Maxim Integrated. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX3485EPA+ MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ ✓ सक्रिय
Maxim Integrated
MAX3485CPA+ MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX3485EPA+ MAX3485CPA+
ब्रांड Analog Devices Maxim Integrated
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type RS-485/RS-422 interface transceiver RS-485/RS-422 transceiver
Supply Voltage Range 3 V to 3.6 V —
Transmission Data Rate Up to 10 Mbps —
Driver Count 1 —
Receiver Count 1 —
Supported Standards RS-422 and RS-485 —
Driver Protection Short-circuit current limiting and thermal shutdown —
Driver Output State During Thermal Shutdown High impedance —
Driver Slew Control Slew-rate limited —
Receiver Fail-Safe Feature Yes —
पैकेज 8-pin PDIP 8-pin PDIP
माउंटिंग प्रकार Through-hole Through hole
Operating Voltage 3.3 V nominal —
Power Dissipation [DATA_NEEDED: power dissipation specification] —
ऑपरेटिंग तापमान [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
ESD Protection [DATA_NEEDED: ESD protection rating] [DATA_NEEDED: device ESD rating]
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
सप्लाई वोल्टेज — 3.3 V
डेटा दर — Up to 10 Mbps
Driver and Receiver Count — 1 driver and 1 receiver
Communication Standard — RS-485 and RS-422
Driver Architecture — Slew-rate limited
Transceiver Configuration — Half-duplex transceiver
Low-Power Operation — 3.3 V low-power transceiver
EMI and Reflection Control — Slew-rate-limited driver intended to minimize EMI and cable reflections
सप्लाई करंट — [DATA_NEEDED: typical and maximum supply current]
Driver Differential Output — [DATA_NEEDED: differential output voltage specifications]
Receiver Input Range — [DATA_NEEDED: receiver differential input range]
Common-Mode Range — [DATA_NEEDED: receiver common-mode voltage range]
Slew Rate — [DATA_NEEDED: driver slew-rate value]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध