Analog Devices

AD544SH - Military BiFET Operational Amplifier | Analog Devices

MPN: AD544SH ✗ کۆتایی ژیان
1000 µV Vdss 25 pA maximum, warmed up Id Hermetically sealed TO-99 metal can Package
MOQ: 1 |

AD544SH گشتی

The Analog Devices AD544SH is a precision, military-grade BiFET operational amplifier packaged in an 8-lead hermetically sealed TO-99 metal can. The device combines a low-noise JFET input stage with an input bias current of 25 pA maximum when warmed up, while the S-grade AD544SH supports an operating temperature range of -55°C to +125°C. Its hermetic metal-can construction makes it suitable for instrumentation, sensor interfaces, and precision analog signal paths requiring a low-bias input resistance.

A BiFET operational amplifier is an input stage built around junction field-effect transistors. The BiFET input architecture places a very low bias current across high-impedance sources, allowing the amplifier to sense weak currents and voltages without loading the source. In the broader hierarchy, the AD544SH belongs to the operational amplifier class, then to precision analog amplifiers, and finally to semiconductor signal-conditioning ICs used in test, measurement, and instrumentation systems.

The principal benefits of the AD544SH include its 25 pA maximum warmed input bias current, low-offset BiFET input characteristics, and extended -55°C to +125°C operating range. The 25 pA bias rating is particularly useful with photodiodes, high-impedance transducers, charge-sensitive circuits, and guarded sensor nodes. The military temperature grade makes the device more appropriate than the commercial J-, K-, or L-grade AD544 variants where environmental extremes and long-term parameter stability are important.

Internally, the AD544 uses a monolithic BiFET and laser-trimmed construction. Laser trimming reduces offset-related variation between individual devices, while the monolithic implementation combines the FET input stage and compensation network in one package. The resulting topology supports stable amplification of low-level analog signals while preserving high input impedance. Offset-null terminals permit local input-offset adjustment when the application requires fine trimming beyond the factory calibration.

Typical uses include precision current-to-voltage conversion, low-current photodetection, bridge-sensor amplification, laboratory buffer stages, and high-impedance instrumentation. In a transimpedance amplifier, the AD544SH's low input bias current reduces error in the feedback-resistor node. In a buffer or voltage follower, its high input impedance limits loading of the source, although the circuit remains subject to input capacitance, leakage, and environmental noise considerations.

For dependable operation, keep the input and feedback impedances realistic for the ambient humidity and temperature, bypass the supply pins close to the device, and route offset-null connections only when external trimming is required. The manufacturer datasheet should be consulted for the complete electrical limits, pin functions, offset-voltage characteristics, compensation details, and recommended application circuit before qualifying the AD544SH in production equipment.

This page consolidates the available manufacturer information, exact-MPN pricing record, package details, family comparison, and practical engineering guidance for engineers evaluating the AD544SH as a hermetically sealed, military-temperature BiFET operational amplifier.

جێگرەوەکانی جێگۆڕکێ بۆ AD544SH — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ AD544SH (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Maximum Input Bias Current, Maximum Input Offset Voltage, Operating Temperature Range, Package, Product Type.

Analog Devices
Maximum Input Bias Current: 25 pA
Maximum Input Offset Voltage: 1 mV
Package: TO-99, 8 pins
بەراوردکردن لەگەڵ AD544SH →
Analog Devices
Maximum Input Bias Current: 25 pA max, warmed up
Maximum Input Offset Voltage: 500 uV max
Operating Temperature Range: 0°C to +70°C
بەراوردکردن لەگەڵ AD544SH →

AD544JH

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 TO-99
Same AD544 family and TO-99 pin configuration, but the operating range is 0°C to +70°C rather than -55°C to +125°C, a 120°C narrower span

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

AD544KH

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 TO-99
Same AD544 family and TO-99 pin configuration, but the operating range is 0°C to +70°C rather than -55°C to +125°C, a 120°C narrower span

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

AD544LH

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 TO-99
Precision operational amplifier · 1 channel · BiFET field-effect transistor input · 25 pA max, warmed up · 500 uV max · Laser trimmed · L commercial grade · 0°C to +70°C

پەیوەندی بۆ نرخ

بینینی داتاشیت →

AD544SH زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type Precision BiFET operational amplifier
Maximum Input Bias Current 25 pA maximum, warmed up
مەودای پلەی گەرمیی کارکردن -55°C to +125°C
Temperature Grade Military S grade
پاکێج Hermetically sealed TO-99 metal can
Number of Terminals 8 terminals
Terminal Form Wire lead
Input Architecture Monolithic BiFET JFET input stage
Offset Trim Technology Laser trimming
Maximum Offset Voltage 1000 µV
Input Bias Current 25 pA maximum, warmed up
Amplifier Count 1 amplifier
Datasheet Page Count 12 pages
Datasheet File Size 374 KB
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification not_applicable

ڕێکخستنی پینی AD544SH

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
پین 1 OFFSET NULL — Offset-voltage adjustment terminal
پین 2 INVERTING INPUT — Inverting input terminal
پین 3 NONINV INPUT — Non-inverting input terminal
پین 4 V- — Negative power-supply terminal
پین 5 OFFSET NULL — Offset-voltage adjustment terminal
پین 6 OUTPUT — Amplified output terminal
پین 7 V+ — Positive power-supply terminal
پین 8 NC — No-connect terminal

بەکارهێنانە باوەکان

AD544SH گونجاوە بۆ 6 بەکارھێنانs: Photodiode Transimpedance Amplification, High-Impedance Sensor Signal Conditioning, Precision Current-to-Voltage Conversion, Laboratory Instrumentation Buffering, Military Avionics Signal Conditioning, Low-Level Bridge Amplifier.

📷

Photodiode Transimpedance Amplification

The AD544SH is well suited to photodiode and phototransistor front ends because its warmed input bias current is limited to 25 pA, reducing the current that can create error across high-value feedback resistors. Place the amplifier at the detector node and use a guarded, contamination-resistant layout to minimize board leakage. The -55°C to +125°C range supports military-temperature optical systems. Compared with a bipolar-input amplifier, the BiFET input stage places less bias-current burden on the detector, although diode capacitance and feedback stability still require careful compensation.

🏭

High-Impedance Sensor Signal Conditioning

For strain, pressure, capacitive, and leakage-sensitive sensors, the AD544SH can buffer a high-impedance source without demanding substantial input current. Its 25 pA maximum warmed bias current is the key advantage when source impedance is high and sensor leakage is comparable to amplifier input current. Use guarding, clean connectors, and stable low-leakage PCB materials to preserve accuracy. The military temperature rating also supports deployed measurement systems where commercial-grade amplifiers would exceed their 0°C to +70°C specification.

⚡

Precision Current-to-Voltage Conversion

The AD544SH can convert a small sensor current into a voltage by using a feedback resistor, with its 25 pA maximum warmed input bias current limiting one source of systematic error. Keep the summing node short and use a high-quality, low-temperature-coefficient resistor to maintain accuracy. Because the package is a hermetically sealed TO-99 metal can rather than a surface-mount device, the part is especially relevant to legacy military and industrial instrumentation with existing through-hole layouts.

🧪

Laboratory Instrumentation Buffering

As a voltage follower or precision buffer, the AD544SH provides high input impedance for sources that cannot drive significant current. The BiFET input stage avoids the larger bias current associated with conventional bipolar-input operational amplifiers, helping preserve source accuracy. Use short feedback traces and verify stability with the source capacitance and measurement bandwidth in mind. For laboratory systems restricted to room temperature, AD544LH or AD544JH offers the same family format, while AD544SH remains appropriate where extended temperature qualification is required.

✈️

Military Avionics Signal Conditioning

AD544SH suits military avionics circuitry where a low-current input stage and -55°C to +125°C operation are important. The hermetically sealed metal-can package provides a mechanically robust through-hole solution, while the 25 pA maximum warmed bias current supports high-impedance sensing nodes. Layout must account for vibration, contamination, and interconnect leakage, and the complete AD544SH electrical limits should be checked at every required temperature. The commercial-grade family alternatives cannot replace its specified environmental range.

🌐

Low-Level Bridge Amplifier

The AD544SH can amplify the small differential signal produced by resistive strain or pressure bridges while placing limited input loading on the sensing network. Its maximum warmed input bias current of 25 pA helps preserve bridge excitation accuracy when source resistances are high. Use matched resistors, differential layout, and grounded guarding to reduce offset and leakage effects. The military temperature rating is valuable in field equipment, whereas AD544JH, AD544KH, and AD544LH are more appropriate only when 0°C to +70°C coverage is sufficient.

کورتەی بەرهەمە پێشنیارکراوەکان

AD544JH Same-family TO-99 amplifier for restricted-temperature optical front ends بەکارهێنراوە لە: Photodiode Transimpedance Amplification, Precision Current-to-Voltage Conversion, Laboratory Instrumentation Buffering, Low-Level Bridge Amplifier AD544LH Analog Devices بەکارهێنراوە لە: Photodiode Transimpedance Amplification, High-Impedance Sensor Signal Conditioning, Precision Current-to-Voltage Conversion, Military Avionics Signal Conditioning, Low-Level Bridge Amplifier AD544KH Same-package family alternative for grade comparison بەکارهێنراوە لە: High-Impedance Sensor Signal Conditioning, Laboratory Instrumentation Buffering, Military Avionics Signal Conditioning
What is the AD544SH?
The AD544SH is a precision, military-grade BiFET operational amplifier from Analog Devices with an input bias current of 25 pA maximum when warmed up. According to the manufacturer datasheet, the device is packaged in an 8-terminal hermetically sealed TO-99 metal can and operates from -55°C to +125°C. Its low-current FET input stage is intended for high-impedance instrumentation and precision analog signal-conditioning applications.
What is the operating temperature range of AD544SH?
The AD544SH operates from -55°C to +125°C because it is the S-grade member of the AD544 family. Analog Devices specifies the J-, K-, and L grades for 0°C to +70°C, while the S grade extends the upper limit by 55°C. Use the manufacturer electrical-characteristics table to confirm that every required parameter remains within its limits across the full military temperature range.
What package does the AD544SH use?
The AD544SH uses an 8-lead hermetically sealed TO-99 metal-can package with wire leads. The Analog Devices datasheet identifies this package for the AD542, AD544, and AD547 precision BiFET family. Its metal-can construction is mechanically different from modern plastic or ceramic surface-mount packages, so existing TO-99 sockets and lead geometry should be checked before using it in a replacement assembly.
Where can I download the AD544SH datasheet PDF?
The official AD544SH documentation is available through Analog Devices' AD544 product page at https://www.analog.com/en/products/ad544.html, with an indexed 12-page AD544SH PDF also available through the linked datasheet service. Use the manufacturer document for authoritative pin functions, electrical limits, offset-null guidance, and application details. The document number and revision should be checked on the downloaded copy before engineering release.
Where can I find the AD544SH pinout?
The AD544SH uses an 8-terminal TO-99 pinout consisting of offset null, inverting input, non-inverting input, negative supply, a second offset-null connection, output, positive supply, and a no-connect position. Use the pin-description table and package drawing in the manufacturer datasheet when assigning the metal-can leads. The TO-99 footprint is not represented by a dedicated package-diagram asset on this page, so the generic diagram is used.
What is the input bias current of AD544SH?
The AD544SH has a maximum input bias current of 25 pA after warm-up, according to Analog Devices. That value is important when the source impedance is high because bias current produces a voltage error across the effective source or feedback resistance. The AD544SH is therefore particularly useful with photodiodes, guarded transducers, leakage-sensitive detectors, and precision current-measurement front ends.
Is AD544SH suitable for photodiode and sensor interfaces?
Yes, the AD544SH is well suited to high-impedance sensor interfaces because its warmed input bias current is limited to 25 pA. In a transimpedance amplifier, that current contributes less offset error than a conventional bipolar-input amplifier, while the -55°C to +125°C range supports military-temperature equipment. PCB insulation, guard rings, humidity control, and stable feedback resistors remain essential to achieve the expected accuracy.
What is the difference between AD544SH and AD544JH?
The principal documented difference is temperature grade: AD544SH covers -55°C to +125°C, while AD544JH belongs to the 0°C to +70°C J-grade range. Both use the same hermetically sealed TO-99 family construction and are intended as pin-compatible family alternatives, but the S-grade provides a 120°C wider operating span. The AD544SH is therefore the preferred choice when the enclosure can exceed the commercial-grade temperature limit.
AD544SH vs AD544LH - which is better for military equipment?
Choose AD544SH for military equipment requiring operation from -55°C to +125°C; AD544LH is specified for the 0°C to +70°C range. The S-grade provides an 85°C wider upper-temperature allowance than the L-grade while retaining the same TO-99 family package. Because the difference is environmental rather than a PCB footprint change, AD544SH is appropriate when full-range operation is required, not merely when a different grade label is preferred.
When should I choose AD544SH over AD544LH?
Choose AD544SH when any required operating condition can fall below 0°C or above 70°C. According to the manufacturer family information, AD544LH is a 0°C to +70°C grade, whereas AD544SH covers -55°C to +125°C. For room-temperature laboratory work with no environmental stress, AD544LH may be adequate; for aircraft, field, automotive-adjacent, or industrial equipment with wide temperature exposure, the S-grade provides the necessary specification range.
What is the best drop-in replacement for AD544SH?
The closest documented same-family drop-in choices are AD544JH, AD544KH, and AD544LH because they use the same TO-99 package and pin configuration. Their principal tradeoff is reduced temperature range: each is specified for 0°C to +70°C, compared with -55°C to +125°C for AD544SH. No verified cross-brand, pin-compatible replacement was identified, so any second-source proposal should be checked against the complete datasheet and mechanical drawing before substitution.
What can replace AD544SH?
AD544JH, AD544KH, or AD544LH can replace AD544SH when the assembly remains within 0°C to +70°C and the required electrical characteristics are otherwise acceptable. They preserve the hermetically sealed TO-99 family format, but none matches the AD544SH's -55°C to +125°C operating range. For military-temperature installations, retain the S-grade unless a formally qualified higher-temperature replacement becomes available.
Is there a cross-brand drop-in replacement for AD544SH?
No cross-brand drop-in replacement for the AD544SH is established by the available cross-reference results. The documented candidates remain within the Analog Devices AD544 family, and cross-reference search pages alone do not prove package, pinout, bias-current, offset, and temperature equivalence. Before using another manufacturer's amplifier, request its exact MPN and compare every manufacturer datasheet limit against the AD544SH, including the hermetic TO-99 mechanical interface.
How do I request a quote and lead time for AD544SH?
Use the Request a Quote form on this page to ask about AD544SH availability, order quantity, delivery timing, and legacy-condition requirements. The exact MPN appears in current marketplace listings, but availability can vary for obsolete military-grade components. Specify the required quantity, packaging preference, inspection level, and date-code or traceability needs so the manufacturer or authorized supply channel can confirm the appropriate lead time.
How much does the AD544SH cost?
Current commercial pricing for the AD544SH should be confirmed through the Request a Quote form on this page because legacy military-grade stock can fluctuate with condition and traceability. The product page does not present a fixed price commitment. When requesting a quotation, identify the exact AD544SH MPN, quantity, and any required date code, inspection, or export-control documentation so the response reflects the correct material.
What are the key specifications of AD544SH that engineers should know?
The key AD544SH specifications are 25 pA maximum warmed input bias current, a -55°C to +125°C operating range, and an 8-terminal hermetically sealed TO-99 package. The manufacturer also identifies the amplifier as a precision, monolithic BiFET device using laser trimming, with a listed maximum offset voltage of 1000 µV. These characteristics position it for high-impedance instrumentation where low loading, military temperature coverage, and environmental sealing are more important than a surface-mount footprint.
What design considerations matter for an AD544SH circuit?
The AD544SH design should minimize leakage around sensitive input nodes, maintain stable feedback resistors, and bypass the supply pins close to the metal can. Because the input bias current is rated after warm-up, allow the circuit to reach operating temperature before relying on a precise bias-current error calculation. Also account for board contamination, connector leakage, humidity, and input capacitance, all of which can dominate practical performance in a high-impedance analog path.

داتای سەرچاوەی ئەندازیاری بۆ AD544SH — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose AD544SH when the design requires a low-bias BiFET operational amplifier in an 8-terminal hermetically sealed TO-99 package and must operate from -55°C to +125°C. It is particularly appropriate for military avionics, high-impedance photodetection, precision current measurement, and legacy industrial instrumentation that already uses through-hole TO-99 outlines. AD544JH, AD544KH, and AD544LH preserve the same family package and basic BiFET characteristics, making them practical alternatives only when operation remains within 0°C to +70°C. The commercial-grade alternatives may reduce procurement or environmental qualification requirements, but they cannot provide the AD544SH's temperature span. For applications requiring tight offset limits, low-noise performance, high slew rate, wide supply voltage, or stable operation into capacitive loads, review the complete AD544 electrical-characteristics table before choosing among the family members.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە AD544JH AD544KH AD544LH
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-terminal hermetically sealed TO-99 metal can 8-terminal hermetically sealed TO-99 metal can 8-terminal hermetically sealed TO-99 metal can 8-terminal hermetically sealed TO-99 metal can
Temperature Grade Military S grade J grade K grade L grade
Operating Temperature Range -55°C to +125°C 0°C to +70°C 0°C to +70°C 0°C to +70°C
Input Bias Current 25 pA maximum, warmed up 25 pA maximum, warmed up 25 pA maximum, warmed up 25 pA maximum, warmed up
Input Architecture Monolithic BiFET Monolithic BiFET Monolithic BiFET Monolithic BiFET
Amplifier Count 1 amplifier 1 amplifier 1 amplifier 1 amplifier
Offset-Voltage Trim Laser trimming with offset-null terminals Laser trimming with offset-null terminals Laser trimming with offset-null terminals Laser trimming with offset-null terminals

جیاکەرەوە سەرەکییەکان

  • Full military temperature coverage (بەراورد بەAD544LH)
  • Broader environmental qualification than commercial grades (بەراورد بەAD544JH)
  • Low-bias BiFET input stage for high-impedance sensing (بەراورد بەAD544KH)

تێبینییەکانی دیزاین

Route the inverting-input summing node with minimal area and keep it away from ground, supply, and clock traces. For high-impedance designs, use a guarded ground plane around the input node, remove solder flux and contamination, and consider guarding connectors. The 25 pA maximum bias current is small enough that leakage through board contamination or humid insulation can become a significant error source.

Bypass the positive and negative supply pins directly at the TO-99 leads using the capacitance and ESR requirements specified by the manufacturer. Keep supply-loop area small to limit transient conversion from switching noise into output disturbance. Decouple sensitive analog supplies upstream and avoid routing the AD544SH output near the summing node when the circuit is configured as a high-gain inverting amplifier.

Validate stability with the actual source capacitance, cable length, and feedback impedance because the AD544SH's low-bias input stage can interact with stray capacitance on a high-impedance node. Keep the feedback resistor physically close to the amplifier, use short traces, and add compensation only after measuring the assembled circuit. Do not rely on nominal bias current alone to guarantee bandwidth or transient response.

Do not substitute AD544JH, AD544KH, or AD544LH when the design must operate below 0°C or above 70°C; those grades have a 120°C narrower operating span than AD544SH. Also avoid leaving an offset-null terminal open without checking the manufacturer's recommended circuit. The AD544SH is a through-hole metal-can legacy part, so verify lead orientation, socket compatibility, and mechanical clearance before installation.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The available information identifies a military S-grade precision BiFET operational amplifier in a hermetically sealed TO-99 package. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was found, so those fields remain unknown. AEC-Q100 is not applicable because the AD544SH is an analog operational amplifier rather than an automotive-qualified device.

داتا پشتڕاستکراوەتەوە لە: 2026-11-14 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

AD544SH datasheet AD544SH datasheet pdf AD544SH pinout AD544SH TO-99 package AD544SH input bias current AD544SH operating temperature Analog Devices AD544SH AD544SH replacement AD544SH equivalent AD544SH vs AD544LH AD544SH drop-in substitute AD544SH price AD544SH stock AD544SH photodiode amplifier AD544SH military operational amplifier

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices AD544SH AD544JH AD544KH AD544LH BiFET operational amplifier precision amplifier analog signal conditioner semiconductor junction field-effect transistor JFET input bias current offset voltage laser trimming TO-99 hermetically sealed metal can through-hole package military temperature grade photodiode transimpedance amplifier strain bridge current-to-voltage conversion high-impedance instrumentation avionics
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ