AD544SH - Military BiFET Operational Amplifier | Analog Devices
MPN: AD544SH ✗ End of LifeAD544SH Overview
A BiFET operational amplifier is an input stage built around junction field-effect transistors. The BiFET input architecture places a very low bias current across high-impedance sources, allowing the amplifier to sense weak currents and voltages without loading the source. In the broader hierarchy, the AD544SH belongs to the operational amplifier class, then to precision analog amplifiers, and finally to semiconductor signal-conditioning ICs used in test, measurement, and instrumentation systems.
The principal benefits of the AD544SH include its 25 pA maximum warmed input bias current, low-offset BiFET input characteristics, and extended -55°C to +125°C operating range. The 25 pA bias rating is particularly useful with photodiodes, high-impedance transducers, charge-sensitive circuits, and guarded sensor nodes. The military temperature grade makes the device more appropriate than the commercial J-, K-, or L-grade AD544 variants where environmental extremes and long-term parameter stability are important.
Internally, the AD544 uses a monolithic BiFET and laser-trimmed construction. Laser trimming reduces offset-related variation between individual devices, while the monolithic implementation combines the FET input stage and compensation network in one package. The resulting topology supports stable amplification of low-level analog signals while preserving high input impedance. Offset-null terminals permit local input-offset adjustment when the application requires fine trimming beyond the factory calibration.
Typical uses include precision current-to-voltage conversion, low-current photodetection, bridge-sensor amplification, laboratory buffer stages, and high-impedance instrumentation. In a transimpedance amplifier, the AD544SH's low input bias current reduces error in the feedback-resistor node. In a buffer or voltage follower, its high input impedance limits loading of the source, although the circuit remains subject to input capacitance, leakage, and environmental noise considerations.
For dependable operation, keep the input and feedback impedances realistic for the ambient humidity and temperature, bypass the supply pins close to the device, and route offset-null connections only when external trimming is required. The manufacturer datasheet should be consulted for the complete electrical limits, pin functions, offset-voltage characteristics, compensation details, and recommended application circuit before qualifying the AD544SH in production equipment.
This page consolidates the available manufacturer information, exact-MPN pricing record, package details, family comparison, and practical engineering guidance for engineers evaluating the AD544SH as a hermetically sealed, military-temperature BiFET operational amplifier.
Drop-in alternatives for AD544SH — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with AD544SH (same form factor and footprint) — differing in Maximum Input Bias Current, Maximum Input Offset Voltage, Operating Temperature Range, Package, Product Type.
AD544JH
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
AD544KH
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
AD544LH
✅ Drop-InContact for price
View Datasheet →AD544SH Maximum Ratings & Electrical Characteristics
| Product Type | Precision BiFET operational amplifier |
| Maximum Input Bias Current | 25 pA maximum, warmed up |
| Operating Temperature Range | -55°C to +125°C |
| Temperature Grade | Military S grade |
| Package | Hermetically sealed TO-99 metal can |
| Number of Terminals | 8 terminals |
| Terminal Form | Wire lead |
| Input Architecture | Monolithic BiFET JFET input stage |
| Offset Trim Technology | Laser trimming |
| Maximum Offset Voltage | 1000 µV |
| Input Bias Current | 25 pA maximum, warmed up |
| Amplifier Count | 1 amplifier |
| Datasheet Page Count | 12 pages |
| Datasheet File Size | 374 KB |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_applicable |
AD544SH Pin Configuration
| Pin 1 | OFFSET NULL — Offset-voltage adjustment terminal |
| Pin 2 | INVERTING INPUT — Inverting input terminal |
| Pin 3 | NONINV INPUT — Non-inverting input terminal |
| Pin 4 | V- — Negative power-supply terminal |
| Pin 5 | OFFSET NULL — Offset-voltage adjustment terminal |
| Pin 6 | OUTPUT — Amplified output terminal |
| Pin 7 | V+ — Positive power-supply terminal |
| Pin 8 | NC — No-connect terminal |
Typical Applications
AD544SH is suitable for 6 applications: Photodiode Transimpedance Amplification, High-Impedance Sensor Signal Conditioning, Precision Current-to-Voltage Conversion, Laboratory Instrumentation Buffering, Military Avionics Signal Conditioning, Low-Level Bridge Amplifier.
Photodiode Transimpedance Amplification
The AD544SH is well suited to photodiode and phototransistor front ends because its warmed input bias current is limited to 25 pA, reducing the current that can create error across high-value feedback resistors. Place the amplifier at the detector node and use a guarded, contamination-resistant layout to minimize board leakage. The -55°C to +125°C range supports military-temperature optical systems. Compared with a bipolar-input amplifier, the BiFET input stage places less bias-current burden on the detector, although diode capacitance and feedback stability still require careful compensation.
Recommended
High-Impedance Sensor Signal Conditioning
For strain, pressure, capacitive, and leakage-sensitive sensors, the AD544SH can buffer a high-impedance source without demanding substantial input current. Its 25 pA maximum warmed bias current is the key advantage when source impedance is high and sensor leakage is comparable to amplifier input current. Use guarding, clean connectors, and stable low-leakage PCB materials to preserve accuracy. The military temperature rating also supports deployed measurement systems where commercial-grade amplifiers would exceed their 0°C to +70°C specification.
Recommended
Precision Current-to-Voltage Conversion
The AD544SH can convert a small sensor current into a voltage by using a feedback resistor, with its 25 pA maximum warmed input bias current limiting one source of systematic error. Keep the summing node short and use a high-quality, low-temperature-coefficient resistor to maintain accuracy. Because the package is a hermetically sealed TO-99 metal can rather than a surface-mount device, the part is especially relevant to legacy military and industrial instrumentation with existing through-hole layouts.
Recommended
Laboratory Instrumentation Buffering
As a voltage follower or precision buffer, the AD544SH provides high input impedance for sources that cannot drive significant current. The BiFET input stage avoids the larger bias current associated with conventional bipolar-input operational amplifiers, helping preserve source accuracy. Use short feedback traces and verify stability with the source capacitance and measurement bandwidth in mind. For laboratory systems restricted to room temperature, AD544LH or AD544JH offers the same family format, while AD544SH remains appropriate where extended temperature qualification is required.
Recommended
Military Avionics Signal Conditioning
AD544SH suits military avionics circuitry where a low-current input stage and -55°C to +125°C operation are important. The hermetically sealed metal-can package provides a mechanically robust through-hole solution, while the 25 pA maximum warmed bias current supports high-impedance sensing nodes. Layout must account for vibration, contamination, and interconnect leakage, and the complete AD544SH electrical limits should be checked at every required temperature. The commercial-grade family alternatives cannot replace its specified environmental range.
Recommended
Low-Level Bridge Amplifier
The AD544SH can amplify the small differential signal produced by resistive strain or pressure bridges while placing limited input loading on the sensing network. Its maximum warmed input bias current of 25 pA helps preserve bridge excitation accuracy when source resistances are high. Use matched resistors, differential layout, and grounded guarding to reduce offset and leakage effects. The military temperature rating is valuable in field equipment, whereas AD544JH, AD544KH, and AD544LH are more appropriate only when 0°C to +70°C coverage is sufficient.
Recommended
Recommended Products Summary
Engineering reference data for AD544SH — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | AD544JH | AD544KH | AD544LH |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-terminal hermetically sealed TO-99 metal can | 8-terminal hermetically sealed TO-99 metal can | 8-terminal hermetically sealed TO-99 metal can | 8-terminal hermetically sealed TO-99 metal can |
| Temperature Grade | Military S grade | J grade | K grade | L grade |
| Operating Temperature Range | -55°C to +125°C | 0°C to +70°C | 0°C to +70°C | 0°C to +70°C |
| Input Bias Current | 25 pA maximum, warmed up | 25 pA maximum, warmed up | 25 pA maximum, warmed up | 25 pA maximum, warmed up |
| Input Architecture | Monolithic BiFET | Monolithic BiFET | Monolithic BiFET | Monolithic BiFET |
| Amplifier Count | 1 amplifier | 1 amplifier | 1 amplifier | 1 amplifier |
| Offset-Voltage Trim | Laser trimming with offset-null terminals | Laser trimming with offset-null terminals | Laser trimming with offset-null terminals | Laser trimming with offset-null terminals |
Key Differentiators
- Full military temperature coverage (vs AD544LH)
- Broader environmental qualification than commercial grades (vs AD544JH)
- Low-bias BiFET input stage for high-impedance sensing (vs AD544KH)
Design Notes
Route the inverting-input summing node with minimal area and keep it away from ground, supply, and clock traces. For high-impedance designs, use a guarded ground plane around the input node, remove solder flux and contamination, and consider guarding connectors. The 25 pA maximum bias current is small enough that leakage through board contamination or humid insulation can become a significant error source.
Bypass the positive and negative supply pins directly at the TO-99 leads using the capacitance and ESR requirements specified by the manufacturer. Keep supply-loop area small to limit transient conversion from switching noise into output disturbance. Decouple sensitive analog supplies upstream and avoid routing the AD544SH output near the summing node when the circuit is configured as a high-gain inverting amplifier.
Validate stability with the actual source capacitance, cable length, and feedback impedance because the AD544SH's low-bias input stage can interact with stray capacitance on a high-impedance node. Keep the feedback resistor physically close to the amplifier, use short traces, and add compensation only after measuring the assembled circuit. Do not rely on nominal bias current alone to guarantee bandwidth or transient response.
Do not substitute AD544JH, AD544KH, or AD544LH when the design must operate below 0°C or above 70°C; those grades have a 120°C narrower operating span than AD544SH. Also avoid leaving an offset-null terminal open without checking the manufacturer's recommended circuit. The AD544SH is a through-hole metal-can legacy part, so verify lead orientation, socket compatibility, and mechanical clearance before installation.
Compliance Information
The available information identifies a military S-grade precision BiFET operational amplifier in a hermetically sealed TO-99 package. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was found, so those fields remain unknown. AEC-Q100 is not applicable because the AD544SH is an analog operational amplifier rather than an automotive-qualified device.