AD604AR - Dual 40MHz Variable Gain Amplifier | Analog Devices
MPN: AD604AR ✓ چالاکAD604AR گشتی
A variable gain amplifier, or VGA, is an analog signal-processing IC that adjusts signal amplitude under electronic control. It belongs to the amplifier hierarchy and supports instrumentation, ultrasound, communications, and industrial measurement systems where received signals vary widely in level. The AD604AR combines programmable gain, wide bandwidth, and low-noise operation in a single dual-channel circuit.
Key characteristics include 40 MHz bandwidth, 170 V/µs slew rate, 400 nA input bias current, and 40 mA output current per channel. The 24-pin SOIC package provides a conventional surface-mount footprint suitable for conventional PCB assembly. The AD604AR is supplied in tube packaging, with the AR suffix identifying the specified orderable variant.
Each channel uses an external control voltage to vary gain across a linear-in-decibel scale. This makes the amplifier useful when a system must accommodate changing input amplitudes without changing the gain-control software or mechanical configuration. The 170 V/µs slew rate supports rapid amplitude transitions, while the 40 MHz bandwidth accommodates moderate-frequency analog signals.
Typical applications include ultrasound receiver channels, medical imaging systems, communications equipment, industrial instrumentation, and professional audio or measurement circuits. Two channels on one package can simplify dual-axis, dual-channel, or parallel-path signal conditioning where channel-to-channel consistency and board area are important.
When designing a board around the AD604AR, keep the gain-control path compact and electrically quiet because control-voltage noise can modulate the output amplitude. Follow the manufacturer pin-description and layout guidance, provide suitable bypass capacitance, and verify signal settling before returning the channel to its normal control voltage. This page combines device specifications, practical application guidance, and drop-in replacement information for faster engineering evaluation.
جێگرەوەکانی جێگۆڕکێ بۆ AD604AR — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
AD604ARZ-RL
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
AD604AR زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Dual-channel variable gain amplifier |
| Amplifier Channel Count | 2 circuits |
| Gain Control Characteristic | Linear-in-dB |
| Bandwidth | 40 MHz |
| Slew Rate | 170 V/µs |
| Input Bias Current | 400 nA |
| Output Current per Channel | 40 mA |
| Minimum Supply Voltage | -5 V |
| پاکێج | 24-pin SOIC |
| Package Body Width | 7.50 mm |
| Package Length | 15.4 mm |
| جۆری دامەزراندن | Surface mount |
| Shipping Package | Tube |
| مەودای پلەی گەرمیی کارکردن | -40°C to +85°C |
| دۆخی RoHS | Non-RoHS compliant |
| Manufacturer Datasheet Length | 20 pages |
ڕێنمایی ڕێکخستنی پینی AD604AR tube
ڕێکخستنی پین بۆ AD604AR (پاکێجی tube). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ AD604AR.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
AD604AR گونجاوە بۆ 6 بەکارھێنانs: Ultrasound Receiver Signal Conditioning, Medical Imaging Signal Paths, Industrial Instrumentation, Communications Receive Chains, Professional Audio and Measurement, Test and Measurement Systems.
Ultrasound Receiver Signal Conditioning
The AD604AR fits ultrasound receiver channels that require electronic gain adjustment as echo strength changes. Its two channels can process related signals in parallel, while the 40 MHz bandwidth supports the receiver's frequency range and the 170 V/µs slew rate accommodates rapid amplitude transitions. The linear-in-dB control characteristic simplifies gain planning because the relationship between control voltage and gain is expressed on a decibel scale rather than a linear voltage scale. In a typical receiver, each channel would amplify the incoming signal and present it to subsequent filtering, digitization, or envelope-detection circuitry. The 400 nA input bias current is also relevant when the source impedance is high. Board design should keep the gain-control traces short, isolate the control path from sensitive inputs, and follow the manufacturer bypass and grounding recommendations.
پێشنیارکراو
Medical Imaging Signal Paths
The AD604AR is suitable for medical imaging systems that must accommodate wide changes in sensor or receiver output level. Its dual-channel structure supports paired or parallel signal paths, while electronic gain control avoids mechanical potentiometers and permits adjustment under software control. The 40 MHz bandwidth is appropriate for many intermediate-frequency signal chains, and the 170 V/µs slew rate helps the amplifier respond quickly as gain changes. In an imaging front end, the AD604AR can sit after a transducer amplifier or controlled-gain stage and before filtering or conversion. Designers should preserve the manufacturer's recommended decoupling, maintain a quiet ground reference, and evaluate common-mode headroom with realistic source amplitudes. Medical-system qualification also depends on the complete circuit, validation process, and intended use rather than the amplifier alone.
پێشنیارکراو
Industrial Instrumentation
The AD604AR fits industrial instrumentation where sensor outputs vary substantially across the measurement range. Electronic gain adjustment allows a single analog channel to remain useful with different transducers or process conditions, and the 40 MHz bandwidth provides margin for moderate-frequency measurement signals. The dual-channel arrangement can condition two related inputs simultaneously, which is valuable for bridge, differential, or redundant measurements. A practical implementation places the AD604AR between the sensor interface and the filter or converter stage, then uses a stable control voltage to establish the operating gain. The 400 nA input bias current is important when the preceding stage has high source impedance, while the 40 mA per-channel output capability should be checked against downstream loading. PCB layout should use short control paths, low-impedance grounding, and decoupling close to the supply pins.
پێشنیارکراو
Communications Receive Chains
The AD604AR can be used in communications receive chains that need automatic or programmed gain control across changing signal amplitudes. Its 40 MHz bandwidth is suitable for many IF-level signal paths, and the 170 V/µs slew rate supports rapid gain changes during acquisition or fading. The two independent channels also allow parallel processing for diversity, monitoring, or differential signal architectures. In a typical receiver, the AD604AR follows an RF-to-IF conversion stage and precedes filtering, demodulation, or digitization. Gain control should be driven from a filtered voltage source because noise on the control line can appear as output amplitude modulation. Engineers should also confirm input common-mode range and output swing with the intended supply configuration. The AD604AR's low input bias current of 400 nA supports operation with higher-impedance preceding stages when the circuit is laid out carefully.
پێشنیارکراو
Professional Audio and Measurement
The AD604AR is useful in professional audio and precision measurement equipment that requires controlled attenuation or amplification within the analog signal path. Its linear-in-dB gain characteristic is convenient for creating repeatable level adjustments, and the 40 MHz bandwidth is well above the audio band, allowing substantial margin for filters and higher-order signal shaping. The dual-channel architecture can support stereo, balanced, or parallel measurement paths. In an implementation, the amplifier may sit after a balanced input stage and before an output driver, converter, or calibrated attenuator. The 170 V/µs slew rate provides fast settling for gain steps, while low-noise operation helps preserve dynamic range in sensitive channels. Layout should minimize loop area around supply connections, use a clean analog ground strategy, and keep the gain-control network physically separated from high-level audio outputs.
پێشنیارکراو
Test and Measurement Systems
The AD604AR fits programmable test and measurement systems that apply different gain settings across a sequence of stimulus levels. Its electronically controlled, linear-in-dB gain behavior makes calibration tables and instrument-control routines easier to implement than with a purely manual attenuator. The 40 MHz bandwidth supports fast test signals and intermediate-frequency measurements, and the two channels can reduce instrument size when two related measurements must be conditioned. A typical bench instrument would accept an input, apply programmable gain through the control pin, and route the result to a detector, ADC, or comparison block. The 170 V/µs slew rate shortens the interval needed after a gain change, although the complete system must wait for circuit settling as required by the manufacturer. Pay particular attention to grounding, supply bypassing, control-voltage noise, and input/output headroom during worst-case test conditions.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ AD604AR — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | AD604ARZ-RL |
|---|---|---|
| Package | 24-pin SOIC | 24-pin SOIC - same |
| Brand | Analog Devices | Analog Devices |
| Amplifier Channel Count | 2 circuits | 2 circuits |
| Bandwidth | 40 MHz | 40 MHz |
| Slew Rate | 170 V/µs | 170 V/µs |
| Input Bias Current | 400 nA | 400 nA |
| Output Current per Channel | 40 mA | 40 mA |
| Gain Control | Linear-in-dB | Linear-in-dB |
| Shipping Format | Tube | Tape and reel |
| RoHS Status | Non-RoHS compliant | Lead-free construction |
جیاکەرەوە سەرەکییەکان
- Dual variable gain channels in one package (بەراورد بەAD604ARZ-RL)
- Wide-band gain adjustment (بەراورد بەAD604ARZ-RL)
- Order-code choice for assembly requirements (بەراورد بەAD604ARZ-RL)
تێبینییەکانی دیزاین
Route each gain-control input as a short, quiet analog trace and place its filtering components close to the AD604AR. Control-voltage noise is converted into output-level variation because the gain is controlled continuously. Keep the control network physically separated from clocked, switching, and high-current return paths, and use a low-noise reference or DAC if the system requires accurate gain steps.
Use the supply configuration and bypass arrangement shown in the manufacturer datasheet, and place ceramic decoupling capacitors close to the supply pins. The operating point must preserve input common-mode range and output swing at the selected gain. Because the device can deliver 40 mA per channel, verify downstream loading and the ability of the supply source to handle transient current while the gain control changes.
Do not treat AD604AR and AD604ARZ-RL as fully interchangeable without checking order-code requirements. Both use the 24-pin SOIC footprint and retain the same core dual-VGA function, but AD604AR is non-RoHS compliant and supplied in a tube, whereas AD604ARZ-RL is lead-free and reel packaged. Confirm assembly format, environmental requirements, and manufacturer limit values before approving either change.
زانیاری پابەندبوون
The AD604AR is identified as non-RoHS compliant and supplied in a tube. The AD604ARZ-RL order code identifies a lead-free, tape-and-reel variant, but its complete compliance declarations should be confirmed in the manufacturer documentation.