Analog Devices

AD604AR - Dual 40MHz Variable Gain Amplifier | Analog Devices

MPN: AD604AR ✓ सक्रिय
-5 V Vdss 400 nA Id 24-pin SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

AD604AR अवलोकन

The Analog Devices AD604AR is a dual-channel, ultralow-noise variable gain amplifier with a 40 MHz bandwidth and 170 V/µs slew rate, housed in a 24-pin SOIC package. The device provides two independent amplifier channels and supports linear-in-dB gain control for time-based signal conditioning.

A variable gain amplifier, or VGA, is an analog signal-processing IC that adjusts signal amplitude under electronic control. It belongs to the amplifier hierarchy and supports instrumentation, ultrasound, communications, and industrial measurement systems where received signals vary widely in level. The AD604AR combines programmable gain, wide bandwidth, and low-noise operation in a single dual-channel circuit.

Key characteristics include 40 MHz bandwidth, 170 V/µs slew rate, 400 nA input bias current, and 40 mA output current per channel. The 24-pin SOIC package provides a conventional surface-mount footprint suitable for conventional PCB assembly. The AD604AR is supplied in tube packaging, with the AR suffix identifying the specified orderable variant.

Each channel uses an external control voltage to vary gain across a linear-in-decibel scale. This makes the amplifier useful when a system must accommodate changing input amplitudes without changing the gain-control software or mechanical configuration. The 170 V/µs slew rate supports rapid amplitude transitions, while the 40 MHz bandwidth accommodates moderate-frequency analog signals.

Typical applications include ultrasound receiver channels, medical imaging systems, communications equipment, industrial instrumentation, and professional audio or measurement circuits. Two channels on one package can simplify dual-axis, dual-channel, or parallel-path signal conditioning where channel-to-channel consistency and board area are important.

When designing a board around the AD604AR, keep the gain-control path compact and electrically quiet because control-voltage noise can modulate the output amplitude. Follow the manufacturer pin-description and layout guidance, provide suitable bypass capacitance, and verify signal settling before returning the channel to its normal control voltage. This page combines device specifications, practical application guidance, and drop-in replacement information for faster engineering evaluation.

के लिए ड्रॉप-इन विकल्प AD604AR — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

AD604ARZ-RL

✅ ड्रॉप-इन
📦 24-pin SOIC
Same 24-pin SOIC footprint and dual-VGA function; AD604AR uses non-RoHS-compliant tube packaging, while AD604ARZ-RL is lead-free and tape-and-reel packaged

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

AD604AR Maximum Ratings और Electrical Characteristics

Product Type Dual-channel variable gain amplifier
Amplifier Channel Count 2 circuits
Gain Control Characteristic Linear-in-dB
Bandwidth 40 MHz
Slew Rate 170 V/µs
Input Bias Current 400 nA
Output Current per Channel 40 mA
Minimum Supply Voltage -5 V
पैकेज 24-pin SOIC
Package Body Width 7.50 mm
Package Length 15.4 mm
माउंटिंग प्रकार Surface mount
Shipping Package Tube
ऑपरेटिंग तापमान रेंज -40°C to +85°C
RoHS स्थिति Non-RoHS compliant
Manufacturer Datasheet Length 20 pages

AD604AR tube पिन कॉन्फ़िगरेशन गाइड

AD604AR (tube पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

AD604AR के लिए tube पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AD604AR.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

AD604AR के लिए उपयुक्त है 6 अनुप्रयोगs: Ultrasound Receiver Signal Conditioning, Medical Imaging Signal Paths, Industrial Instrumentation, Communications Receive Chains, Professional Audio and Measurement, Test and Measurement Systems.

🩺

Ultrasound Receiver Signal Conditioning

The AD604AR fits ultrasound receiver channels that require electronic gain adjustment as echo strength changes. Its two channels can process related signals in parallel, while the 40 MHz bandwidth supports the receiver's frequency range and the 170 V/µs slew rate accommodates rapid amplitude transitions. The linear-in-dB control characteristic simplifies gain planning because the relationship between control voltage and gain is expressed on a decibel scale rather than a linear voltage scale. In a typical receiver, each channel would amplify the incoming signal and present it to subsequent filtering, digitization, or envelope-detection circuitry. The 400 nA input bias current is also relevant when the source impedance is high. Board design should keep the gain-control traces short, isolate the control path from sensitive inputs, and follow the manufacturer bypass and grounding recommendations.

💊

Medical Imaging Signal Paths

The AD604AR is suitable for medical imaging systems that must accommodate wide changes in sensor or receiver output level. Its dual-channel structure supports paired or parallel signal paths, while electronic gain control avoids mechanical potentiometers and permits adjustment under software control. The 40 MHz bandwidth is appropriate for many intermediate-frequency signal chains, and the 170 V/µs slew rate helps the amplifier respond quickly as gain changes. In an imaging front end, the AD604AR can sit after a transducer amplifier or controlled-gain stage and before filtering or conversion. Designers should preserve the manufacturer's recommended decoupling, maintain a quiet ground reference, and evaluate common-mode headroom with realistic source amplitudes. Medical-system qualification also depends on the complete circuit, validation process, and intended use rather than the amplifier alone.

🏭

Industrial Instrumentation

The AD604AR fits industrial instrumentation where sensor outputs vary substantially across the measurement range. Electronic gain adjustment allows a single analog channel to remain useful with different transducers or process conditions, and the 40 MHz bandwidth provides margin for moderate-frequency measurement signals. The dual-channel arrangement can condition two related inputs simultaneously, which is valuable for bridge, differential, or redundant measurements. A practical implementation places the AD604AR between the sensor interface and the filter or converter stage, then uses a stable control voltage to establish the operating gain. The 400 nA input bias current is important when the preceding stage has high source impedance, while the 40 mA per-channel output capability should be checked against downstream loading. PCB layout should use short control paths, low-impedance grounding, and decoupling close to the supply pins.

🌐

Communications Receive Chains

The AD604AR can be used in communications receive chains that need automatic or programmed gain control across changing signal amplitudes. Its 40 MHz bandwidth is suitable for many IF-level signal paths, and the 170 V/µs slew rate supports rapid gain changes during acquisition or fading. The two independent channels also allow parallel processing for diversity, monitoring, or differential signal architectures. In a typical receiver, the AD604AR follows an RF-to-IF conversion stage and precedes filtering, demodulation, or digitization. Gain control should be driven from a filtered voltage source because noise on the control line can appear as output amplitude modulation. Engineers should also confirm input common-mode range and output swing with the intended supply configuration. The AD604AR's low input bias current of 400 nA supports operation with higher-impedance preceding stages when the circuit is laid out carefully.

🎧

Professional Audio and Measurement

The AD604AR is useful in professional audio and precision measurement equipment that requires controlled attenuation or amplification within the analog signal path. Its linear-in-dB gain characteristic is convenient for creating repeatable level adjustments, and the 40 MHz bandwidth is well above the audio band, allowing substantial margin for filters and higher-order signal shaping. The dual-channel architecture can support stereo, balanced, or parallel measurement paths. In an implementation, the amplifier may sit after a balanced input stage and before an output driver, converter, or calibrated attenuator. The 170 V/µs slew rate provides fast settling for gain steps, while low-noise operation helps preserve dynamic range in sensitive channels. Layout should minimize loop area around supply connections, use a clean analog ground strategy, and keep the gain-control network physically separated from high-level audio outputs.

🖥️

Test and Measurement Systems

The AD604AR fits programmable test and measurement systems that apply different gain settings across a sequence of stimulus levels. Its electronically controlled, linear-in-dB gain behavior makes calibration tables and instrument-control routines easier to implement than with a purely manual attenuator. The 40 MHz bandwidth supports fast test signals and intermediate-frequency measurements, and the two channels can reduce instrument size when two related measurements must be conditioned. A typical bench instrument would accept an input, apply programmable gain through the control pin, and route the result to a detector, ADC, or comparison block. The 170 V/µs slew rate shortens the interval needed after a gain change, although the complete system must wait for circuit settling as required by the manufacturer. Pay particular attention to grounding, supply bypassing, control-voltage noise, and input/output headroom during worst-case test conditions.

अनुशंसित उत्पादों का सारांश

AD604AR Analog Devices उपयोग में: Ultrasound Receiver Signal Conditioning, Medical Imaging Signal Paths, Industrial Instrumentation, Communications Receive Chains, Professional Audio and Measurement, Test and Measurement Systems AD604ARZ-RL Lead-free, reel-packaged drop-in option उपयोग में: Ultrasound Receiver Signal Conditioning, Medical Imaging Signal Paths, Industrial Instrumentation, Communications Receive Chains, Professional Audio and Measurement, Test and Measurement Systems
What is the AD604AR?
The AD604AR is a dual-channel, ultralow-noise variable gain amplifier with a 40 MHz bandwidth and a 170 V/µs slew rate. According to the Analog Devices AD604 product page and datasheet, it uses a linear-in-decibel control characteristic for electronic gain adjustment. The device is packaged as a 24-pin SOIC and is intended for applications such as ultrasound receivers, instrumentation, communications, and other wide-dynamic-range analog signal chains.
What are the key specifications of AD604AR that engineers should know?
The AD604AR combines two VGA channels, 40 MHz bandwidth, a 170 V/µs slew rate, 400 nA input bias current, and 40 mA output current per channel in a 24-pin SOIC package. According to the Analog Devices AD604 datasheet, its linear-in-dB gain-control characteristic is particularly useful for ultrasound and other systems that require rapid, electronic adjustment across changing signal levels. The dual-channel architecture can also reduce the component count in parallel signal paths.
What is the operating voltage range of AD604AR?
The AD604AR supports dual-supply operation, with a listed minimum supply of -5 V and an operating temperature range of -40°C to +85°C. The Analog Devices datasheet contains the complete electrical-limit table, including maximum supply voltage and input common-mode limits. Before applying power, confirm those limits against the exact operating condition because the -5 V figure identifies a minimum supply condition rather than a complete recommended operating range.
Where can I download the AD604AR datasheet PDF?
The official AD604AR datasheet is available through Analog Devices' AD604 product page at https://www.analog.com/en/products/ad604.html. The manufacturer data sheet is titled “Dual, Ultralow Noise Variable Gain Amplifier” and includes electrical characteristics, pin descriptions, gain-control characteristics, and application information. Use the manufacturer document for final design decisions because it defines the authoritative limits and test conditions for the AD604 family.
Where can I find the AD604AR pinout?
Use the pin-description table and package drawing in the Analog Devices AD604 manufacturer datasheet to assign the AD604AR pins. The component is a 24-pin SOIC with two variable gain amplifier channels, so PCB routing must preserve the channel inputs, outputs, gain controls, supplies, and grounding exactly as shown in that table. Treat every supply and ground connection as functional rather than relying on generic SOIC-24 conventions.
Is AD604AR suitable for ultrasound receiver channels?
Yes, the AD604AR is suitable for ultrasound receiver channels because the Analog Devices product page identifies the AD604 as optimized for time-based variable gain control in ultrasound applications. Its two amplifier channels support parallel or dual-path signal conditioning, while the 40 MHz bandwidth and 170 V/µs slew rate help accommodate rapidly changing receiver amplitudes. The linear-in-dB control characteristic also simplifies gain calculations when the receiver level changes over a broad range.
AD604AR vs AD604ARZ-RL: which is better?
The AD604AR and AD604ARZ-RL are pin-compatible 24-pin SOIC devices, but their order codes and compliance characteristics differ. The AD604AR is the non-RoHS-compliant tube-packaged version, whereas the AD604ARZ-RL is a lead-free SOIC variant supplied on tape and reel. According to the manufacturer naming information, the Z suffix identifies lead-free construction, while the R suffix identifies reel packaging. Verify the exact environmental and assembly requirements before substitution.
When should I choose AD604AR over AD604ARZ-RL?
Choose the AD604AR when the design specifically requires the non-lead-free, tube-packaged orderable variant and the assembly process accepts that package format. Choose AD604ARZ-RL when a lead-free 24-pin SOIC in reel packaging is required for automated production or when the product must satisfy a lead-free procurement requirement. Both retain the same dual-VGA architecture and are suitable for direct PCB substitution only after the suffix-specific compliance and packing requirements are checked.
Is AD604AR suitable for a 40 MHz instrumentation signal chain?
The AD604AR is appropriate as a candidate for a 40 MHz instrumentation signal chain because its listed bandwidth is 40 MHz and its slew rate is 170 V/µs. According to the Analog Devices data sheet, the dual-channel architecture supports parallel amplification, and the 400 nA input bias current is useful with high-impedance sources. The practical signal quality also depends on the selected gain, source impedance, bandwidth configuration, layout, and output loading.
What can replace the AD604AR?
The AD604ARZ-RL is a documented pin-compatible replacement candidate for the AD604AR because both use a 24-pin SOIC package and maintain consistent terminals and primary performance characteristics. The two parts differ in suffix-specific construction and packaging, so a drop-in decision should account for RoHS status, lead-free requirements, and reel-versus-tube handling. No verified cross-brand replacement was identified, so an alternative from another manufacturer should not be assumed to be pin-compatible.
Can AD604ARZ-RL replace AD604AR without PCB changes?
Yes, the AD604ARZ-RL can replace the AD604AR without PCB changes because the manufacturer comparison identifies consistent terminals and package characteristics in a 24-pin SOIC footprint. Confirm the power configuration, gain-control polarity, common-mode limits, and decoupling requirements before production use. The functional match does not make the order codes interchangeable without considering lead-free compliance, packing format, and assembly-line material handling.
What is the best Analog Devices equivalent for AD604AR?
The AD604ARZ-RL is the closest verified Analog Devices orderable equivalent because it retains the same 24-pin SOIC implementation and is described as a complete replacement in a manufacturer comparison listing. The principal distinction is the Z lead-free construction and RL reel packaging rather than a change in the basic amplifier configuration. AD604ANZ is not a drop-in substitute for this SOIC board because it uses a different package.
Where to buy AD604AR online?
The AD604AR can be requested through XAIPART's Request a Quote form on this page using the exact MPN AD604AR. Request the current unit price, stock position, minimum order quantity, lead time, and tube-packaging requirements directly through that form. The requested orderable code identifies a 24-pin SOIC device supplied in a tube, so include that packaging detail when asking for a quotation.
What is the price of AD604AR?
The current AD604AR commercial terms are handled through XAIPART's Request a Quote form on this page. Submit the exact MPN AD604AR and specify the required quantity, shipment destination, and tube-packaging preference to receive current pricing and availability. Pricing and lead time can change with market conditions, so the quote form provides the appropriate commercial response for this orderable variant.
What is the lead time for AD604AR?
Request the current AD604AR lead time and minimum order quantity through XAIPART's Request a Quote form on this page. Include the exact AD604AR MPN and the required tube quantity so the commercial response reflects the correct 24-pin SOIC orderable variant. Engineers should also allow time for incoming inspection and any change-control review of the non-RoHS AR suffix versus a lead-free replacement.
Is AD604AR in stock?
Current AD604AR inventory should be confirmed through XAIPART's Request a Quote form on this page. Provide the required quantity and tube-packaging preference to obtain an availability response for the exact AD604AR orderable code. Do not infer stock from a family-level product listing because inventory and lead time can differ between suffix, temperature grade, and packaging options.

के लिए इंजीनियरिंग संदर्भ डेटा AD604AR — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose AD604AR when the design calls for a dual-channel, linear-in-dB VGA in a 24-pin SOIC and the product can use a non-RoHS-compliant, tube-packaged orderable variant. It is particularly appropriate for ultrasound, medical imaging, communications, instrumentation, and test systems requiring 40 MHz bandwidth and fast gain transitions. Choose AD604ARZ-RL when the same pin-compatible dual-VGA implementation is needed but lead-free construction and reel packaging are preferred for production. Do not use AD604ANZ as a direct substitute because its DIP package requires a different PCB footprint. No verified cross-brand drop-in equivalent was identified, so a competitor part should only be considered after its pinout, gain-control transfer function, bandwidth, slew rate, supply arrangement, and common-mode limits have been checked against the manufacturer data. For either ordering code, verify compliance needs and production handling before releasing the BOM.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद AD604ARZ-RL
Package 24-pin SOIC 24-pin SOIC - same
Brand Analog Devices Analog Devices
Amplifier Channel Count 2 circuits 2 circuits
Bandwidth 40 MHz 40 MHz
Slew Rate 170 V/µs 170 V/µs
Input Bias Current 400 nA 400 nA
Output Current per Channel 40 mA 40 mA
Gain Control Linear-in-dB Linear-in-dB
Shipping Format Tube Tape and reel
RoHS Status Non-RoHS compliant Lead-free construction

मुख्य विशेषताएँ

  • Dual variable gain channels in one package (बनामAD604ARZ-RL)
  • Wide-band gain adjustment (बनामAD604ARZ-RL)
  • Order-code choice for assembly requirements (बनामAD604ARZ-RL)

डिज़ाइन नोट्स

Route each gain-control input as a short, quiet analog trace and place its filtering components close to the AD604AR. Control-voltage noise is converted into output-level variation because the gain is controlled continuously. Keep the control network physically separated from clocked, switching, and high-current return paths, and use a low-noise reference or DAC if the system requires accurate gain steps.

Use the supply configuration and bypass arrangement shown in the manufacturer datasheet, and place ceramic decoupling capacitors close to the supply pins. The operating point must preserve input common-mode range and output swing at the selected gain. Because the device can deliver 40 mA per channel, verify downstream loading and the ability of the supply source to handle transient current while the gain control changes.

Do not treat AD604AR and AD604ARZ-RL as fully interchangeable without checking order-code requirements. Both use the 24-pin SOIC footprint and retain the same core dual-VGA function, but AD604AR is non-RoHS compliant and supplied in a tube, whereas AD604ARZ-RL is lead-free and reel packaged. Confirm assembly format, environmental requirements, and manufacturer limit values before approving either change.

अनुपालन जानकारी

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
No
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The AD604AR is identified as non-RoHS compliant and supplied in a tube. The AD604ARZ-RL order code identifies a lead-free, tape-and-reel variant, but its complete compliance declarations should be confirmed in the manufacturer documentation.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

AD604AR datasheet AD604AR datasheet pdf AD604AR pinout AD604AR specifications AD604AR equivalent AD604AR replacement AD604AR cross reference AD604AR vs AD604ARZ-RL AD604AR 24-SOIC amplifier AD604AR 40MHz variable gain amplifier AD604AR ultrasound amplifier AD604AR price AD604AR stock Analog Devices AD604AR AD604AR application circuit

संबंधित कंपोनेंट्स और शब्द

Analog Devices AD604 AD604AR AD604ARZ-RL AD604ANZ variable gain amplifier VGA linear-in-dB gain control amplifier IC analog signal conditioning 40 MHz bandwidth 170 V/µs slew rate 400 nA input bias current 24-pin SOIC SOIC family surface-mount package ultralow-noise amplifier ultrasound receiver medical imaging industrial instrumentation communications receiver RoHS lead-free packaging gain-control voltage
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें