ADM202EARN - Dual 230kbps RS-232 Transceiver | Analog Devices
MPN: ADM202EARN ✓ چالاکADM202EARN گشتی
An RS-232 transceiver is an interface circuit that converts logic-level digital signals into RS-232 voltage levels and converts received RS-232 levels back into logic-compatible signals. In the electronic-component hierarchy, the ADM202EARN belongs to the RS-232 interface IC category, combines line-driver and line-receiver functions, and provides bidirectional communication between a host controller and a peripheral or data terminal.
Key features include two driver channels, two receiver channels, operation from a single 5 V power supply, and a maximum data rate of 230 kbit/s. The device meets or exceeds TIA/EIA-232-E and V.28 requirements. Its ±15 kV human-body-model ESD protection and low-emissions design support use in electrically noisy industrial and communications equipment.
Internally, the ADM202E interface section uses charge-pump capacitors to produce the bipolar voltage levels required by RS-232. Four external 0.1 µF capacitors support the voltage doubler and inverter, allowing the complete interface to operate from 5 V without a separate negative power supply. Fast driver slew rates help minimize transmission-line distortion on longer cables.
Typical applications include industrial serial consoles, point-of-sale terminals, laboratory and test equipment, embedded serial-port interfaces, and service or maintenance equipment connected through legacy RS-232 ports. The dual-channel arrangement can support two data or control links when the connected equipment uses RS-232 rather than low-voltage TTL signaling.
For implementation, place the four 0.1 µF charge-pump capacitors close to their associated pins and use the package pin-description table in the manufacturer datasheet when assigning PCB tracks. Keep the interface ground and logic ground properly referenced, and validate signal levels, cable length, and protection requirements in the finished equipment.
This page combines the Analog Devices product information with practical application guidance, drop-in alternatives, and design considerations for engineers evaluating the ADM202EARN in existing RS-232 interfaces.
جێگرەوەکانی جێگۆڕکێ بۆ ADM202EARN — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADM202EARN (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Interface Standard, Maximum Data Rate, Operating Temperature Range, Product Type.
ADM207AR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADM208EAR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX202EPE+
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX232ECDR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADM202EARN تایبەتمەندییەکان
| Product Type | Dual RS-232 line driver/receiver transceiver |
| Number of Channels | 2 channels |
| Number of Drivers | 2 drivers |
| Number of Receivers | 2 receivers |
| ڤۆڵتیەی دابینکردن | 5 V |
| Maximum Data Rate | 230 kbit/s |
| RS-232 Output Level | ±10 V |
| Charge-Pump Capacitor Value | 0.1 µF each |
| External Charge-Pump Capacitor Count | 4 capacitors |
| ESD Protection | ±15 kV human body model |
| Contact Discharge ESD Protection | 8 kV |
| Air-Gap Discharge ESD Protection | 15 kV |
| Interface Standard | TIA/EIA-232-E and V.28 |
| پاکێج | 16-pin SOIC |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی ADM202EARN 16-pin soic
ڕێکخستنی پین بۆ ADM202EARN (پاکێجی 16-pin soic). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADM202EARN.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ADM202EARN گونجاوە بۆ 6 بەکارھێنانs: Industrial Serial Console, Point-of-Sale Terminal Interface, Laboratory Test Equipment, Embedded Serial Port Interface, Network Equipment Maintenance Port, Instrumentation and Service Equipment.
Industrial Serial Console
The ADM202EARN fits industrial serial-console designs that require a legacy RS-232 connection from a controller board to a service terminal. Its two drivers and two receivers support multiple RS-232 signal paths, while the 5 V supply and internal charge pump avoid a separate negative rail. The 230 kbit/s rate provides useful headroom for configuration transfer and diagnostic data, and ±15 kV human-body-model ESD protection improves robustness in electrically noisy equipment. Designers should still use enclosure grounding, cable transient protection, and the manufacturer’s four-capacitor charge-pump layout.
پێشنیارکراو
Point-of-Sale Terminal Interface
The ADM202EARN can bridge a low-voltage controller to a point-of-sale peripheral through an RS-232 port. Operating from a single 5 V supply simplifies the power architecture, while the on-chip charge pump generates the required ±10 V RS-232 output levels using four 0.1 µF capacitors. Its 230 kbit/s capability allows rapid exchanges of transaction, status, and diagnostic records. For retail equipment, place the interface connector close to ESD protection and maintain a controlled ground path so cable-borne transients do not bypass the device’s internal protections.
پێشنیارکراو
Laboratory Test Equipment
The ADM202EARN is appropriate for laboratory instruments that retain RS-232 control and measurement ports. The two-channel arrangement can support separate transmit and receive paths or two independent communication links, while 230 kbit/s is suitable for commands and sampled diagnostic data. A single 5 V rail simplifies integration beside digital controllers, and the charge-pump output levels provide compatibility with standard RS-232 peripherals. Engineers should follow the reference capacitor placement, verify grounding around the instrument chassis, and test operation with the intended cable because line loading can influence signal integrity.
پێشنیارکراو
Embedded Serial Port Interface
The ADM202EARN adds a standards-compatible RS-232 port to an embedded controller that exposes only logic-level serial signals. Two drivers translate controller outputs into RS-232 levels, and two receivers return remote signals to the controller. Its 230 kbit/s maximum data rate supports faster configuration, logging, and firmware-related exchanges than conventional low-speed serial links. The 5 V operating supply and integrated charge pump are useful in compact embedded systems, but PCB space and thermal requirements should be checked against the 16-pin SOIC footprint and the required external capacitor network.
پێشنیارکراو
Network Equipment Maintenance Port
The ADM202EARN is suitable for a maintenance or out-of-band management port on communications equipment where technicians connect through an RS-232 service connector. Its ±15 kV human-body-model ESD rating and low-emissions characteristics are useful in a shared cabinet environment, while dual channels offer flexibility for management and diagnostic paths. The 230 kbit/s rate permits efficient configuration and log retrieval. A practical design should include connector-side surge protection, chassis grounding, and a defined disconnect strategy that prevents external ground potential differences from stressing the equipment.
پێشنیارکراو
Instrumentation and Service Equipment
The ADM202EARN can provide bidirectional RS-232 connectivity in service tools, programmable instruments, and legacy-compatible test fixtures. Two driver outputs and two receiver inputs suit split communication arrangements, while operation from one 5 V source simplifies portable or embedded instrument power systems. The 230 kbit/s data rate supports efficient control traffic and reduces transfer time compared with slow serial links. Because RS-232 uses bipolar signaling and a shared ground reference, the board should follow the charge-pump capacitor layout, preserve ground continuity, and use suitable cable strain relief and transient protection.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADM202EARN — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ADM207AR | ADM208EAR | MAX202E | MAX232E |
|---|---|---|---|---|---|
| Package | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-lead narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Maxim Integrated | Maxim Integrated |
جیاکەرەوە سەرەکییەکان
- Higher documented data rate than conventional low-speed serial interfaces (بەراورد بەADM207AR)
- Documented enhanced human-body-model ESD protection (بەراورد بەADM208EAR)
- Single-supply bipolar RS-232 output generation (بەراورد بەMAX202E)
- Cross-manufacturer socket compatibility is explicitly documented (بەراورد بەMAX232E)
تێبینییەکانی دیزاین
Place the four 0.1 µF charge-pump capacitors close to the pins specified by the manufacturer’s application circuit. Keep each capacitor’s return and routed length short because the charge-pump nodes switch rapidly and long PCB traces can increase radiated emissions or ringing. Keep the RS-232 connector and protection components near the board edge, and separate the interface return path from noisy switching-converter currents where practical.
Do not treat an RS-232 interface as a galvanically isolated connection. The signal depends on a common ground reference, and ground-potential differences can cause unwanted current or communication errors. Use the manufacturer pin table for every driver, receiver, supply, charge-pump, and no-connect assignment. Also confirm whether the selected replacement suffix includes shutdown, enable, or other functions that differ from the original ADM202EARN.
The ADM202EARN is designed for low EMI emissions, but system compliance still depends on connector placement, cable shielding, enclosure grounding, and return-current control. Connect the interface ground to the appropriate reference plane without creating long shared paths beneath the charge-pump network. Validate radiated and conducted emissions in the finished enclosure because external cables can behave as antennas even when the integrated interface meets its device-level limits.
Preserve a short, direct path between the charge-pump capacitors, their associated IC pins, and the supply bypass network. Avoid routing RS-232 driver outputs beneath sensitive analog or high-speed digital sections, and keep connector protection current away from logic ground. If the board combines RS-232 with a switching supply, verify power-supply startup behavior because the generated bipolar output depends on correct charge-pump operation.
زانیاری پابەندبوون
The documentation identifies conformity with TIA/EIA-232-E and V.28, EMC Directive 89/336/EEC, ESD test levels, EFT burst immunity, and low EMI emissions under EN 55022. Component-level RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses are not established.