Analog Devices

ADM202EARN - Dual 230kbps RS-232 Transceiver | Analog Devices

MPN: ADM202EARN ✓ פעיל
5 V Vdss 16-pin SOIC Package
כמות הזמנה מינימלית: 1 |

ADM202EARN סקירה

The Analog Devices ADM202EARN is a dual-channel RS-232 line driver and receiver transceiver with a 5 V supply, 230 kbit/s data rate, and ±15 kV ESD protection in a 16-pin SOIC package. The on-chip charge-pump circuit generates ±10 V RS-232 output levels from four external 0.1 µF capacitors.

An RS-232 transceiver is an interface circuit that converts logic-level digital signals into RS-232 voltage levels and converts received RS-232 levels back into logic-compatible signals. In the electronic-component hierarchy, the ADM202EARN belongs to the RS-232 interface IC category, combines line-driver and line-receiver functions, and provides bidirectional communication between a host controller and a peripheral or data terminal.

Key features include two driver channels, two receiver channels, operation from a single 5 V power supply, and a maximum data rate of 230 kbit/s. The device meets or exceeds TIA/EIA-232-E and V.28 requirements. Its ±15 kV human-body-model ESD protection and low-emissions design support use in electrically noisy industrial and communications equipment.

Internally, the ADM202E interface section uses charge-pump capacitors to produce the bipolar voltage levels required by RS-232. Four external 0.1 µF capacitors support the voltage doubler and inverter, allowing the complete interface to operate from 5 V without a separate negative power supply. Fast driver slew rates help minimize transmission-line distortion on longer cables.

Typical applications include industrial serial consoles, point-of-sale terminals, laboratory and test equipment, embedded serial-port interfaces, and service or maintenance equipment connected through legacy RS-232 ports. The dual-channel arrangement can support two data or control links when the connected equipment uses RS-232 rather than low-voltage TTL signaling.

For implementation, place the four 0.1 µF charge-pump capacitors close to their associated pins and use the package pin-description table in the manufacturer datasheet when assigning PCB tracks. Keep the interface ground and logic ground properly referenced, and validate signal levels, cable length, and protection requirements in the finished equipment.

This page combines the Analog Devices product information with practical application guidance, drop-in alternatives, and design considerations for engineers evaluating the ADM202EARN in existing RS-232 interfaces.

חלופות תחליף ישיר עבור ADM202EARN — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם ADM202EARN (אותו גורם צורה וטביעת רגל) — שונים ב Package, Interface Standard, Maximum Data Rate, Operating Temperature Range, Product Type.

Analog Devices
Package: 24-pin SOIC
Interface Standard: EIA-232-E and V.28
Product Type: RS-232 transceiver
השווה עם ADM202EARN →
Analog Devices
Package: 24-lead SOIC
Interface Standard: RS-232
Maximum Data Rate: 200 kbps
השווה עם ADM202EARN →
Maxim Integrated
Package: 16-pin PDIP
Interface Standard: RS-232
Maximum Data Rate: 120kbps
השווה עם ADM202EARN →
Texas Instruments
Package: 16-pin SOIC (D)
Operating Temperature Range: 0 °C to 70 °C (commercial)
השווה עם ADM202EARN →

ADM207AR

✅ Drop-In
Analog Devices
📦 16-pin narrow SOIC
RS-232 transceiver · +5 V · 5 · 3 · 200 kb/s · 0.1 µF · 9 V · 15 mW

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ADM208EAR

✅ Drop-In
Analog Devices
📦 16-pin narrow SOIC
RS-232 transceiver · 4 drivers · 4 receivers · 5 V · 200 kbps · 0.1 µF · RS-232 · EIA-232 and CCITT V.28

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX202EPE+

✅ Drop-In
Maxim Integrated
📦 16-pin narrow SOIC
Dual-driver, dual-receiver RS-232 transceiver · 4.5V to 5.5V · 5V · 5V · 120kbps · 0.12Mbps · 2 · 2

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX232ECDR

✅ Drop-In
Texas Instruments
📦 16-pin narrow SOIC
Dual RS-232 Driver/Receiver · 2 · 2 · 120 kbit/s · 4.5 V to 5.5 V · 8 mA (typ) · ±30 V · ±5 V min, ±10 V typ (from charge pump)

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ADM202EARN מפרטים

Product Type Dual RS-232 line driver/receiver transceiver
Number of Channels 2 channels
Number of Drivers 2 drivers
Number of Receivers 2 receivers
מתח אספקה 5 V
Maximum Data Rate 230 kbit/s
RS-232 Output Level ±10 V
Charge-Pump Capacitor Value 0.1 µF each
External Charge-Pump Capacitor Count 4 capacitors
ESD Protection ±15 kV human body model
Contact Discharge ESD Protection 8 kV
Air-Gap Discharge ESD Protection 15 kV
Interface Standard TIA/EIA-232-E and V.28
מארז 16-pin SOIC
סוג הרכבה Surface mount

מדריך תצורת פינים של ADM202EARN 16-pin soic

תצורת פינים עבור ADM202EARN (מארזת 16-pin soic). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 16-pin soic עבור ADM202EARN

אין נתוני פריסת פינים מפורטים עבור ADM202EARN.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ADM202EARN מתאים עבור 6 יישוםs: Industrial Serial Console, Point-of-Sale Terminal Interface, Laboratory Test Equipment, Embedded Serial Port Interface, Network Equipment Maintenance Port, Instrumentation and Service Equipment.

🏭

Industrial Serial Console

The ADM202EARN fits industrial serial-console designs that require a legacy RS-232 connection from a controller board to a service terminal. Its two drivers and two receivers support multiple RS-232 signal paths, while the 5 V supply and internal charge pump avoid a separate negative rail. The 230 kbit/s rate provides useful headroom for configuration transfer and diagnostic data, and ±15 kV human-body-model ESD protection improves robustness in electrically noisy equipment. Designers should still use enclosure grounding, cable transient protection, and the manufacturer’s four-capacitor charge-pump layout.

🖥️

Point-of-Sale Terminal Interface

The ADM202EARN can bridge a low-voltage controller to a point-of-sale peripheral through an RS-232 port. Operating from a single 5 V supply simplifies the power architecture, while the on-chip charge pump generates the required ±10 V RS-232 output levels using four 0.1 µF capacitors. Its 230 kbit/s capability allows rapid exchanges of transaction, status, and diagnostic records. For retail equipment, place the interface connector close to ESD protection and maintain a controlled ground path so cable-borne transients do not bypass the device’s internal protections.

🔧

Laboratory Test Equipment

The ADM202EARN is appropriate for laboratory instruments that retain RS-232 control and measurement ports. The two-channel arrangement can support separate transmit and receive paths or two independent communication links, while 230 kbit/s is suitable for commands and sampled diagnostic data. A single 5 V rail simplifies integration beside digital controllers, and the charge-pump output levels provide compatibility with standard RS-232 peripherals. Engineers should follow the reference capacitor placement, verify grounding around the instrument chassis, and test operation with the intended cable because line loading can influence signal integrity.

🧩

Embedded Serial Port Interface

The ADM202EARN adds a standards-compatible RS-232 port to an embedded controller that exposes only logic-level serial signals. Two drivers translate controller outputs into RS-232 levels, and two receivers return remote signals to the controller. Its 230 kbit/s maximum data rate supports faster configuration, logging, and firmware-related exchanges than conventional low-speed serial links. The 5 V operating supply and integrated charge pump are useful in compact embedded systems, but PCB space and thermal requirements should be checked against the 16-pin SOIC footprint and the required external capacitor network.

🌐

Network Equipment Maintenance Port

The ADM202EARN is suitable for a maintenance or out-of-band management port on communications equipment where technicians connect through an RS-232 service connector. Its ±15 kV human-body-model ESD rating and low-emissions characteristics are useful in a shared cabinet environment, while dual channels offer flexibility for management and diagnostic paths. The 230 kbit/s rate permits efficient configuration and log retrieval. A practical design should include connector-side surge protection, chassis grounding, and a defined disconnect strategy that prevents external ground potential differences from stressing the equipment.

🔧

Instrumentation and Service Equipment

The ADM202EARN can provide bidirectional RS-232 connectivity in service tools, programmable instruments, and legacy-compatible test fixtures. Two driver outputs and two receiver inputs suit split communication arrangements, while operation from one 5 V source simplifies portable or embedded instrument power systems. The 230 kbit/s data rate supports efficient control traffic and reduces transfer time compared with slow serial links. Because RS-232 uses bipolar signaling and a shared ground reference, the board should follow the charge-pump capacitor layout, preserve ground continuity, and use suitable cable strain relief and transient protection.

סיכום מוצרים מומלצים

ADM208EAR Analog Devices בשימוש ב-: Industrial Serial Console, Point-of-Sale Terminal Interface, Embedded Serial Port Interface, Network Equipment Maintenance Port MAX232E RS-232 transceiver family identified as socket compatible בשימוש ב-: Industrial Serial Console, Embedded Serial Port Interface, Instrumentation and Service Equipment ADM207AR Analog Devices בשימוש ב-: Point-of-Sale Terminal Interface, Laboratory Test Equipment, Network Equipment Maintenance Port MAX202E Compatible socket family for replacement designs בשימוש ב-: Laboratory Test Equipment, Instrumentation and Service Equipment
Where can I download the ADM202EARN datasheet PDF?
The ADM202EARN datasheet and product information are available through Analog Devices, the component manufacturer. The manufacturer product page provides the technical description and ordering information, while third-party datasheet indexes provide downloadable copies of the device documentation. Use the pin-description table and application information in the manufacturer datasheet when assigning the 16 SOIC pins and selecting the four required 0.1 µF charge-pump capacitors.
What are the key specifications of ADM202EARN that engineers should know?
The ADM202EARN is a two-channel RS-232 transceiver designed for 5 V operation. Its principal specifications include two drivers, two receivers, a 230 kbit/s maximum data rate, ±10 V generated RS-232 output levels, and ±15 kV human-body-model ESD protection. Four external 0.1 µF capacitors are required for the internal charge pump, and the device is offered in a 16-pin SOIC package.
What is the operating voltage of ADM202EARN?
The ADM202EARN operates from a single 5 V supply. Its internal charge-pump circuitry develops the positive and negative voltage rails needed for RS-232 signaling, including approximately ±10 V output levels. Four external 0.1 µF capacitors are required for the voltage doubler and inverter, so the power-supply design must accommodate the device’s operating current and transient behavior.
How fast is the ADM202EARN RS-232 interface?
The ADM202EARN supports data rates to 230 kbit/s. This makes it suitable for conventional RS-232 and V.28 links that require substantially more throughput than a legacy low-speed serial port. The Analog Devices product information identifies the interface as meeting or exceeding TIA/EIA-232-E and V.28 requirements, although actual end-to-end throughput also depends on the host UART, cable, and connected peripheral.
Does ADM202EARN need external charge-pump capacitors?
Yes, the ADM202EARN requires four external 0.1 µF charge-pump capacitors. These capacitors allow the on-chip voltage doubler and inverter to generate bipolar RS-232 levels from the single 5 V supply. Follow the manufacturer application circuit for capacitor connection and placement, because incorrect routing or unsuitable capacitor characteristics can affect startup behavior and transmitted signal quality.
Where can I find the ADM202EARN pinout?
Use the manufacturer datasheet for the authoritative ADM202EARN pin-description table and package drawing. The part is a 16-pin SOIC device, and its external connections include the RS-232 driver and receiver terminals, 5 V supply, ground, charge-pump network, and package-specific no-connect positions. The exact numbered pin assignments should be copied directly from the datasheet before the PCB footprint is released.
What can replace the ADM202EARN?
Pin-compatible replacement candidates include the Analog Devices ADM207AR and ADM208EAR in 16-lead narrow SOIC packages, together with the MAX202E and MAX232E families identified as compatible sockets for the ADM202E. Before substitution, verify the exact pinout, supply limits, driver and receiver counts, operating temperature, shutdown behavior, and charge-pump capacitor connections for the specific orderable suffix.
Can ADM207AR replace ADM202EARN?
The ADM207AR is a strong functional replacement candidate for the ADM202EARN because both are dual-channel RS-232 transceivers in a 16-pin narrow SOIC package and use the same supply-voltage range and driver/receiver architecture. It should still be treated as a redesign check rather than an automatic substitution: compare every numbered pin, charge-pump connection, temperature range, and electrical limit against the original design.
When should I choose ADM202EARN over ADM208EAR?
Choose the ADM202EARN when its documented two-driver, two-receiver configuration, 230 kbit/s operation, and ±15 kV human-body-model ESD rating satisfy the equipment requirements. The ADM208EAR is documented as another narrow-SOIC candidate with the same supply voltage and data rate, so the decisive factors are exact pin compatibility, available shutdown or power-control functions, temperature grade, and lifecycle requirements.
Is ADM202EARN suitable for industrial RS-232 equipment?
The ADM202EARN is suitable for industrial RS-232 interfaces that benefit from its ±15 kV human-body-model ESD protection, 8 kV contact-discharge rating, 15 kV air-gap rating, and low-emissions design. The Analog Devices documentation also identifies fast driver slew rates for reduced transmission-line distortion. Final suitability still depends on enclosure grounding, cable selection, isolation strategy, and the complete system’s EMC test requirements.
Where can I buy ADM202EARN online?
Use the Request a Quote form on this page to request ADM202EARN availability, current commercial terms, and a lead-time estimate. The form allows buyers to specify the required quantity and packaging without relying on a static price that may become outdated. Because this product is listed in active production, a quotation request is the appropriate route for planned production, prototype, and maintenance quantities.
What is the price of ADM202EARN?
The current commercial price for ADM202EARN depends on order quantity, package configuration, and purchasing conditions. Submit a request through the Request a Quote form on this page for an up-to-date offer and lead time. The quoted value should be used for sourcing decisions because component-market pricing and availability can change independently of the device’s technical specifications.
What is the lead time and stock status of ADM202EARN?
Request the current stock position, minimum order quantity, and production lead time through the Request a Quote form on this page. Analog Devices lists the ADM202 as an active product family, but that lifecycle status does not guarantee immediate availability for every package suffix or order quantity. Confirm the exact ADM202EARN configuration and required delivery schedule with the quotation response.
What is the difference between ADM202EARN and ADM208EAR?
The ADM202EARN and ADM208EAR are both dual-channel RS-232 transceivers offered in a 16-lead narrow SOIC package, and the cross-reference information identifies matching supply voltage and data-rate characteristics. Their functional replacement potential does not eliminate the need for a detailed comparison. Review enable or shutdown pins, receiver behavior, ESD ratings, temperature limits, and manufacturer pin tables before approving a substitution.
Does ADM202EARN include ESD protection?
The ADM202EARN includes enhanced ESD protection rated to ±15 kV under the human-body model. The documentation also identifies 8 kV contact discharge and 15 kV air-gap discharge levels, together with immunity to EFT fast-transient bursts and low EMI emissions. These device-level ratings support robust interface design, but they do not replace system-level grounding, shielding, and surge-protection practices.
Is there a MAX202E or MAX232E equivalent for ADM202EARN?
The ADM202E is identified by Analog Devices as a robust pin-compatible upgrade for existing MAX202E and MAX232E sockets, making those families useful replacement candidates when their exact suffix, pinout, and electrical limits match the design. Because device variants can differ in power-saving features and operating range, verify every pin and function against the applicable manufacturer datasheet before production substitution.

נתוני עזר הנדסיים עבור ADM202EARN — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the ADM202EARN for a new 5 V RS-232 design that requires two drivers, two receivers, operation to 230 kbit/s, and enhanced ±15 kV human-body-model ESD protection. ADM207AR is appropriate when its verified data rate, shutdown behavior, and exact pin functions satisfy the design. ADM208EAR is a strong candidate when its enable or power-management features provide a functional benefit, because the two families are documented as sharing supply voltage and data-rate characteristics. MAX202E and MAX232E are useful when an existing socket uses one of those families or supply continuity is important; verify temperature grade, low-power options, and every pin before substitution. For all alternatives, confirm the 16-pin narrow SOIC footprint, charge-pump capacitor network, grounding strategy, and manufacturer datasheet limits before production release.

השוואה עם חלופות

פרמטר מוצר זה ADM207AR ADM208EAR MAX202E MAX232E
Package 16-pin narrow SOIC 16-pin narrow SOIC 16-lead narrow SOIC 16-pin narrow SOIC 16-pin narrow SOIC
Brand Analog Devices Analog Devices Analog Devices Maxim Integrated Maxim Integrated

מבדילים עיקריים

  • Higher documented data rate than conventional low-speed serial interfaces (לעומתADM207AR)
  • Documented enhanced human-body-model ESD protection (לעומתADM208EAR)
  • Single-supply bipolar RS-232 output generation (לעומתMAX202E)
  • Cross-manufacturer socket compatibility is explicitly documented (לעומתMAX232E)

הערות תכנון

Place the four 0.1 µF charge-pump capacitors close to the pins specified by the manufacturer’s application circuit. Keep each capacitor’s return and routed length short because the charge-pump nodes switch rapidly and long PCB traces can increase radiated emissions or ringing. Keep the RS-232 connector and protection components near the board edge, and separate the interface return path from noisy switching-converter currents where practical.

Do not treat an RS-232 interface as a galvanically isolated connection. The signal depends on a common ground reference, and ground-potential differences can cause unwanted current or communication errors. Use the manufacturer pin table for every driver, receiver, supply, charge-pump, and no-connect assignment. Also confirm whether the selected replacement suffix includes shutdown, enable, or other functions that differ from the original ADM202EARN.

The ADM202EARN is designed for low EMI emissions, but system compliance still depends on connector placement, cable shielding, enclosure grounding, and return-current control. Connect the interface ground to the appropriate reference plane without creating long shared paths beneath the charge-pump network. Validate radiated and conducted emissions in the finished enclosure because external cables can behave as antennas even when the integrated interface meets its device-level limits.

Preserve a short, direct path between the charge-pump capacitors, their associated IC pins, and the supply bypass network. Avoid routing RS-232 driver outputs beneath sensitive analog or high-speed digital sections, and keep connector protection current away from logic ground. If the board combines RS-232 with a switching supply, verify power-supply startup behavior because the generated bipolar output depends on correct charge-pump operation.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The documentation identifies conformity with TIA/EIA-232-E and V.28, EMC Directive 89/336/EEC, ESD test levels, EFT burst immunity, and low EMI emissions under EN 55022. Component-level RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses are not established.

הנתונים אומתו בתאריך: 2026-11-09 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

adm202earn datasheet ADM202EARN datasheet pdf ADM202EARN pinout ADM202EARN schematic ADM202EARN equivalent ADM202EARN replacement ADM202EARN cross reference ADM202EARN vs ADM208EAR ADM202EARN 230kbps RS-232 ADM202EARN SOIC-16 pinout ADM202EARN RS-232 application circuit ADM202EARN price Analog Devices ADM202EARN ADM202EARN charge pump capacitors

רכיבים ומונחים קשורים

Analog Devices ADM202EARN ADM202E ADM207AR ADM208EAR MAX202E MAX232E RS-232 transceiver line driver line receiver interface IC semiconductor TIA/EIA-232-E V.28 charge pump voltage doubler voltage inverter 5 V power supply 230 kbit/s ±15 kV ESD protection 0.1 µF capacitor 16-pin SOIC SOIC family surface-mount package industrial serial communication
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר