Analog Devices

ADM241LARZ - 5V 4/5 RS-232 Transceiver | Analog Devices

MPN: ADM241LARZ ✓ چالاک
4.5 V to 5.5 V Vdss 28-lead WSOIC Package
MOQ: 1 |

ADM241LARZ گشتی

Analog Devices ADM241LARZ is a single-supply RS-232 transceiver with four drivers and five receivers, a maximum data rate of 120 kB/s, and integrated DC-DC converter support for ±9 V output swing. It operates from a 5 V supply in a 28-lead WSOIC package, making it suitable for compact, single-board serial-interface equipment.

An RS-232 transceiver is an interface IC that combines voltage-line drivers and receivers for bidirectional or multipoint serial communication. RS-232 belongs to the interface-IC hierarchy and uses positive and negative voltage levels to represent digital logic. The ADM241L family is designed for EIA-232-E and V.28 communication interfaces where separate ±12 V supplies are impractical. A single 5 V rail and onboard charge-pump circuitry simplify system power design.

The ADM241LARZ integrates four driver channels and five receiver channels, allowing one package to support several serial links or a mix of transmit and receive functions. Its 120 kB/s maximum data rate suits equipment-control, instrumentation, point-of-sale, industrial, and data-acquisition links that do not require the throughput of a high-speed LVDS interface. Onboard DC-DC converters produce approximately ±9 V output swing, while the small external capacitor requirement of 1 µF reduces board area.

Operationally, the device separates low-voltage logic signaling from the bipolar RS-232 interface. The four drivers translate logic-high and logic-low inputs into RS-232 levels, while the five receivers convert bipolar line voltages back into digital logic outputs. The receiver population is one channel higher than the driver population, allowing a design with four outgoing channels and five incoming channels. The transmitter and receiver enables provide local control over bus participation.

Typical uses include industrial control terminals, laboratory interfaces, POS systems, embedded service ports, and legacy peripheral connections. It is particularly useful when the equipment needs several RS-232 ports but has only a 5 V power rail. Compared with discrete RS-232 drivers and receivers, the integrated device reduces footprint, component count, and the chance of inconsistent charge-pump routing.

For layout, place the 1 µF charge-pump capacitors close to their designated pins and route the high-current loops with minimal area. Keep the logic side away from connector-side return paths, observe the supply and enable sequencing requirements, and test signal integrity with the actual cable and load. The WSOIC package also requires thermal consideration when several drivers operate continuously on bus-limited signals.

This product page consolidates the verified electrical facts, package information, replacement analysis, interface applications, and PCB-design guidance for the ADM241LARZ. It also distinguishes genuine pin-compatible alternatives from related interface ICs that use a different package or channel count.

جێگرەوەکانی جێگۆڕکێ بۆ ADM241LARZ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADM241LARZ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Maximum Data Rate, Package, Supply Voltage.

Analog Devices
Maximum Data Rate: 120 kbps
Package: 28-pin SOIC
Supply Voltage: 5 V
بەراوردکردن لەگەڵ ADM241LARZ →

ADM241LAR

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 28-lead WSOIC
RS-232 transceiver · 5 V · 4 · 5 · 120 kbps · Approximately ±9 V · 1 µF · ≤1 µA

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX241CWI+

✅ جێگرەوەی ڕاستەوخۆ
📦 28-pin WSOIC
Cross-brand 28-pin WSOIC option with the same 4 drivers and 5 receivers; documented channel-count difference is 0, while timing, enable logic, and charge-pump details require comparison.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ADM241LARZ تایبەتمەندییەکان

Product Type RS-232 transceiver
Number of Drivers 4
Number of Receivers 5
ڤۆڵتیەی دابینکردن 4.5 V to 5.5 V
Maximum Data Rate 120 kB/s
RS-232 Output Swing Approximately ±9 V
External Charge-Pump Capacitor 1 µF
Logic Levels Single 5 V CMOS-compatible interface
پاکێج 28-lead WSOIC
Driver Enable Control Yes
Receiver Enable Control Yes
Integrated DC-DC Converter Yes
EIA-232-E Compliance Meets EIA-232-E specifications
V.28 Compliance Meets V.28 specifications
دۆخی RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable
Lead-Free Status unknown

ڕێنمایی ڕێکخستنی پینی ADM241LARZ 28-lead wsoic

ڕێکخستنی پین بۆ ADM241LARZ (پاکێجی 28-lead wsoic). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 28-lead wsoic بۆ ADM241LARZ

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADM241LARZ.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ADM241LARZ گونجاوە بۆ 6 بەکارھێنانs: Industrial Control Terminals, Point-of-Sale Equipment, Laboratory Data Acquisition, Embedded Service Ports, Network Equipment Console, Instrumentation and Test Systems.

🏭

Industrial Control Terminals

The ADM241LARZ suits industrial terminals that must support several legacy serial links from a single 5 V rail. Four drivers and five receivers provide enough channels for equipment control, status reporting, and local diagnostics without requiring separate driver and receiver packages. Its 120 kB/s maximum data rate is sufficient for command traffic, while onboard DC-DC converters generate approximately ±9 V for the RS-232 side. The 28-lead WSOIC also helps limit board area. Place the required 1 µF charge-pump capacitors close to their pins and keep connector-side current paths compact to preserve signal quality.

🏭

Point-of-Sale Equipment

Point-of-sale products commonly retain RS-232 connections for printers, scanners, scales, and customer displays. The ADM241LARZ consolidates four transmit and five receive channels into one 28-lead WSOIC while accepting a single 4.5 V to 5.5 V supply. The 120 kB/s data rate matches the transaction-oriented traffic commonly used by legacy peripherals. Integrated DC-DC conversion removes the need for a separate negative supply rail, while 1 µF charge-pump capacitors reduce board-space requirements. Validate driver loading, cable length, grounding, and connector protection with the complete peripheral set before production.

🖥️

Laboratory Data Acquisition

The ADM241LARZ can connect laboratory instruments and fixture controllers that retain RS-232 command ports. Four drivers support outbound commands to several instruments, while five receivers can collect status or measurement data. A single 5 V rail simplifies adapter-board design, and the 120 kB/s rate is appropriate for short command-and-response transactions rather than continuous high-bandwidth transfer. Onboard DC-DC converters provide approximately ±9 V output swing without an external negative rail. Keep the analog or sensitive measurement circuitry separate from the charge-pump and connector return paths, and confirm grounding to avoid injecting interface transients into measured signals.

🔧

Embedded Service Ports

The ADM241LARZ is useful in embedded systems that must service legacy RS-232 peripherals during installation, configuration, or field diagnostics. Its four driver channels can target several service connectors, and five receiver channels support incoming configuration or acknowledgment signals. Operating from 4.5 V to 5.5 V allows implementation beside common 5 V embedded logic. The 120 kB/s maximum rate is more than adequate for service commands, while onboard DC-DC converters eliminate a separate ±12 V source. Design the enable controls to prevent unnecessary transmitters from driving an inactive bus, and place protection components where they can clamp connector-side transients without adding excessive capacitance to the RS-232 outputs.

🌐

Network Equipment Console

Network and communications equipment often retains an RS-232 console for installation, recovery, and configuration even when primary data transfer uses Ethernet. The ADM241LARZ provides a 5 V-compatible console subsystem with four drivers and five receivers in a 28-lead WSOIC. Its 120 kB/s rate supports terminal interaction and diagnostic commands, while integrated charge pumps supply the required bipolar RS-232 levels. The larger receiver count allows several console or status inputs to share one device. Keep the console channel physically segregated from switching power stages and high-speed interfaces, and verify the adapter-board grounding scheme to prevent console activity from disturbing the main system.

🖥️

Instrumentation and Test Systems

The ADM241LARZ can consolidate multiple RS-232 connections in instrumentation and automated test systems where the 5 V supply is available but bipolar line voltage is not. Four drivers can send commands to separate instruments, while five receivers can read independent status channels. The device's 120 kB/s maximum data rate suits supervisory and configuration traffic rather than high-volume sensor streaming. Its onboard DC-DC converters produce approximately ±9 V output swing, and the specified 1 µF capacitor arrangement limits external charge-pump component count. Use short, properly grounded interface wiring and verify that automated test commands cannot leave multiple transmitters active on the same bus.

کورتەی بەرهەمە پێشنیارکراوەکان

MAX241CWI+ Multichannel RS-232 alternative for a new 28-pin WSOIC design بەکارهێنراوە لە: Industrial Control Terminals, Point-of-Sale Equipment, Laboratory Data Acquisition, Embedded Service Ports, Network Equipment Console, Instrumentation and Test Systems ADM241LAR Analog Devices بەکارهێنراوە لە: Industrial Control Terminals, Point-of-Sale Equipment, Laboratory Data Acquisition, Embedded Service Ports, Network Equipment Console, Instrumentation and Test Systems
What is the ADM241LARZ?
The ADM241LARZ is a 5 V RS-232 transceiver integrating four drivers and five receivers in a 28-lead WSOIC package. According to the Analog Devices ADM241L product page, it supports EIA-232-E and V.28 interfaces, reaches 120 kB/s, and uses onboard DC-DC converters to produce approximately ±9 V output swing. It simplifies legacy serial interfaces that cannot conveniently use separate ±12 V supplies.
What is the operating voltage of ADM241LARZ?
The ADM241LARZ operates from a single 4.5 V to 5.5 V supply. According to the ADM241L manufacturer product information, the device uses a single 5 V CMOS-compatible power rail and onboard DC-DC converters to generate the bipolar voltage levels required by the RS-232 interface. This makes it suitable for systems in which negative voltage generation would otherwise require a separate converter or charge pump.
How many RS-232 drivers and receivers does ADM241LARZ have?
The ADM241LARZ provides four RS-232 drivers and five receivers. The manufacturer describes it as a four-driver, five-receiver interface in a 28-lead WSOIC package. This channel arrangement supports designs with four outgoing serial connections and five incoming connections, while transmitter and receiver enable controls allow unused directions to be disabled when required by the system.
Where can I download the ADM241LARZ datasheet?
The official ADM241L datasheet and product documentation are available through the Analog Devices product page at https://www.analog.com/en/products/adm241l.html. Use the manufacturer datasheet for the authoritative pin description, electrical characteristics, enable logic, timing information, charge-pump capacitor requirements, and recommended application circuit. The ADM241LARZ is the 28-lead WSOIC ordering option.
Where can I find the ADM241LARZ pinout?
The ADM241LARZ pinout is shown in the pin-description and package-drawing sections of the Analog Devices ADM241L datasheet. The component uses a 28-lead WSOIC package with driver, receiver, logic-side, power, ground, enable, and charge-pump connections. Use the pin-description table when assigning PCB nets rather than inferring connections from channel count, because transceiver enable and charge-pump pins must be wired according to the datasheet.
What is the maximum data rate of ADM241LARZ?
The ADM241LARZ supports a maximum data rate of 120 kB/s according to the Analog Devices product page. This rate is appropriate for legacy RS-232 equipment-control, industrial terminal, POS, and instrumentation links. It is not intended for modern high-speed differential interfaces, so system designs must keep signaling within the EIA-232-E and V.28 constraints implemented by the device.
Is ADM241LARZ suitable for industrial serial interfaces?
The ADM241LARZ is suitable for many industrial RS-232 interfaces because it supports EIA-232-E and V.28 operation from a single 5 V supply at up to 120 kB/s. Its four drivers and five receivers can consolidate multiple serial channels on one board. For harsh environments, verify the exact operating-temperature grade, isolation strategy, surge protection, and cable requirements before treating the interface as a complete industrial protection solution.
What can replace the ADM241LARZ?
The MAX241CWI+ is a documented drop-in alternative to the ADM241LARZ because both are 28-pin WSOIC devices with four drivers and five receivers. The ADM241LAR is also a closely related same-manufacturer option for boards that accept its ordering code. Confirm supply pins, enable polarity, charge-pump capacitor values, and timing limits against the relevant manufacturer datasheet before substituting any part.
What is the best MAX241CWI+ equivalent for ADM241LARZ?
The MAX241CWI+ is the best-documented Maxim equivalent in the available cross-reference material for the ADM241LARZ. Both devices are described as 28-pin WSOIC multichannel RS-232 transceivers with four drivers and five receivers. The documented channel-count difference is zero, but engineers should still compare charge-pump topology, enable polarity, and electrical limits in the individual manufacturer datasheets before production substitution.
What is the difference between ADM241LARZ and MAX241CWI+?
The ADM241LARZ and MAX241CWI+ both use a 28-pin WSOIC package and provide four drivers with five receivers, giving them a zero difference in the documented channel count. The devices are produced by different manufacturers, so their internal charge-pump arrangements, shutdown behavior, timing boundaries, and electrical characteristics should be checked separately. Pin compatibility is indicated by the comparison material, but qualification should include system-level testing.
When should I choose ADM241LARZ over MAX241CWI+?
Choose the ADM241LARZ when its Analog Devices qualification history, availability, or documented operating characteristics best fit the finished equipment. The MAX241CWI+ is attractive when its particular supply, enable, timing, and production parameters match the design better. Because both parts expose four drivers and five receivers in a 28-pin WSOIC, the decision should be based on verified electrical requirements rather than channel count alone.
Is ADM241LARZ the same as ADM241LAR?
The ADM241LAR and ADM241LARZ are closely related Analog Devices orderable versions, but their suffix meanings and procurement contexts must be checked before treating them as identical. The ADM241LARZ is identified as a 28-lead WSOIC RS-232 transceiver with four drivers and five receivers. Review the manufacturer ordering guide and package marking information for the exact variant selected for production.
Where to buy ADM241LARZ online?
Use the Request a Quote form on this page to request ADM241LARZ availability, lead time, and order details for the exact 28-lead WSOIC ordering code. The form helps confirm the required suffix, packaging arrangement, quantity, and delivery schedule. Engineers should also verify current lifecycle status and obtain the manufacturer datasheet before placing a production order.
What is the price of ADM241LARZ?
The current commercial terms for ADM241LARZ are handled through the Request a Quote form on this page. Submit the required quantity, package variant, delivery location, and target schedule for an actionable quotation. The form avoids presenting a stale unit or tier value and lets procurement confirm current availability for the exact ADM241LARZ ordering code.
What is the lead time and stock status for ADM241LARZ?
Request the current lead time and stock status for ADM241LARZ through the Request a Quote form on this page. Include the exact MPN, annual and build quantities, and required shipment date so the quotation reflects the intended production plan. Inventory can change with package configuration and market demand, making a direct quotation the most reliable purchasing response.

داتای سەرچاوەی ئەندازیاری بۆ ADM241LARZ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the ADM241LARZ when the design needs four RS-232 drivers, five receivers, a single 4.5 V to 5.5 V rail, and a documented maximum rate of 120 kB/s in a 28-lead WSOIC. Select ADM241LAR when its documented 100 kB/s limit is acceptable and the same-manufacturer ordering option better matches the product configuration. Consider the MAX241CWI+ when its individual electrical timing, enable behavior, qualification, and production conditions provide a stronger fit for the finished equipment. All listed candidates share the same 28-pin WSOIC format and 4/5 channel arrangement, but a mechanical footprint match does not eliminate the need to verify charge-pump connections, shutdown behavior, logic levels, and absolute maximum ratings in each manufacturer datasheet.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە ADM241LAR MAX241CWI+
Package 28-lead WSOIC 28-lead WSOIC 28-pin WSOIC
Brand Analog Devices Analog Devices Maxim Integrated
Transceiver Type RS-232 transceiver RS-232 transceiver RS-232 transceiver
Number of Drivers 4 4 4
Number of Receivers 5 5 5
Supply Voltage 4.5 V to 5.5 V 4.5 V to 5.5 V 5 V
Integrated DC-DC Converter Yes Yes Yes

جیاکەرەوە سەرەکییەکان

  • Consolidates multiple RS-232 channels in one package (بەراورد بەMAX241CWI+)
  • Higher documented maximum data rate within the related ADM241L options (بەراورد بەADM241LAR)
  • Single-supply implementation with integrated level generation (بەراورد بەMAX241CWI+)

تێبینییەکانی دیزاین

Place the specified 1 µF charge-pump capacitors directly beside the pins identified in the ADM241L datasheet. Keep the associated switching-current loops compact and avoid routing them beneath the logic ground reference. Because the device generates approximately ±9 V internally, a small loop area helps contain switching noise and improves the likelihood that adjacent low-level logic remains undisturbed.

Do not enable multiple transmitters when they can drive the same RS-232 bus at the same time. The ADM241LARZ has four driver channels, and simultaneous active outputs can create contention even when the logical data appears idle. Review the enable-control truth table and firmware power-up sequence so unused or isolated channels enter a safe state before the system begins transmitting.

Use the pin-description table in the manufacturer datasheet when assigning nets, and treat the connector side as a bipolar RS-232 domain rather than a logic-level domain. Keep return-current paths continuous to the interface ground and separate them from sensitive measurement references. When substituting a compatible 28-pin device, verify enable polarity, charge-pump topology, timing, and output levels rather than relying on package position alone.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The interface meets EIA-232-E and V.28 specifications according to the Analog Devices product page. Specific material-compliance declarations are not stated in the available manufacturer product information.

داتا پشتڕاستکراوەتەوە لە: 2026-11-19 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ADM241LARZ datasheet ADM241LARZ datasheet pdf ADM241LARZ pinout ADM241LARZ schematic ADM241LARZ equivalent ADM241LARZ replacement ADM241LARZ cross reference ADM241LARZ vs MAX241CWI+ ADM241LARZ WSOIC-28 footprint Analog Devices ADM241LARZ ADM241LARZ 120 kB/s ADM241LARZ 4 drivers 5 receivers ADM241LARZ RS-232 application circuit ADM241LARZ price ADM241LARZ stock

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices ADM241LARZ ADM241LAR MAX241CWI+ Maxim Integrated RS-232 transceiver interface IC line driver line receiver EIA-232-E V.28 single 5 V power supply DC-DC converter 120 kB/s 4 drivers 5 receivers 28-lead WSOIC SOIC package family surface-mount device charge-pump capacitor 1 µF capacitor RS-232 output swing industrial control point-of-sale equipment laboratory instrumentation
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ