ADS7806U - 12-Bit Low-Power SAR ADC | Texas Instruments
MPN: ADS7806U ✓ چالاکADS7806U گشتی
An SAR ADC is a sampling analog-to-digital converter that uses a successive-approximation register to compare the sampled input with successive internal reference levels. It belongs to the ADC hierarchy, which includes sampling ADCs, data converters, and semiconductor signal-processing devices. Compared with flash and pipeline ADC architectures, a SAR ADC generally combines straightforward control logic with practical resolution, accuracy, and power efficiency for instrumentation, industrial-control, and embedded measurement systems.
The ADS7806U emphasizes low power and compact implementation. Maximum power dissipation is 35 mW, while power-down mode reduces consumption to 50 µW. Its 12-bit resolution supports 4096 quantization levels, and the specified integral nonlinearity and differential nonlinearity are each limited to ±1/2 LSB. A minimum SINAD of 72 dB with a 1 kHz input provides a useful indication of conversion performance, while internal or external reference selection allows the converter to be adapted to different system accuracy and noise requirements.
The device accepts single-ended analog signals through one SAR input and supports both parallel and serial data-output styles. Its acquisition-and-conversion interval of no more than 25 µs makes it suitable for continuously refreshed measurement channels. The single +5 V supply architecture simplifies analog and digital rail planning, although input signals must remain within the selected range and the application must provide appropriate source impedance, filtering, and sampling-network components.
Typical uses include industrial process control, sensor-interface modules, data acquisition systems, laboratory instruments, battery-powered equipment, and embedded monitoring systems. It is especially relevant when a design needs a low-power 12-bit converter with flexible output formats. For bipolar or wider-range instrumentation, the ±10 V input option allows the ADC to interface with suitable signal-conditioning circuits without requiring a negative supply at the converter.
When laying out the ADS7806U, place the reference and analog-input connections away from digital output and clock traces, and keep input paths short to reduce noise pickup. Power-supply decoupling should be placed directly beside the supply pins. Input-source impedance and acquisition timing must be checked against the converter specifications so that the sampling capacitor can settle before conversion starts.
This page combines the manufacturer product information with focused engineering guidance covering conversion performance, power behavior, interface choices, layout priorities, and verified replacement options. It also distinguishes true same-package drop-in alternatives from parts that would require a PCB footprint change, helping engineers assess compatibility before committing to a redesign.
جێگرەوەکانی جێگۆڕکێ بۆ ADS7806U — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS7806U (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, SINAD, Supply Voltage, Architecture, Resolution.
ADS7807U
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS7825U
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS7806U/1K
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS7806U زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| ADC Type | 12-bit SAR sampling CMOS ADC |
| Number of Input Channels | 1 input |
| وردی | 12 bit |
| Input Signal Type | Single-ended |
| Input Ranges | 0 V to +5 V, 0 V to +4 V, and ±10 V |
| ڤۆڵتیەی دابینکردن | +5 V |
| Maximum Power Dissipation | 35 mW |
| Power-Down Current | 50 µW |
| Acquisition and Conversion Time | 25 µs maximum |
| Integral Nonlinearity | ±1/2 LSB maximum |
| Differential Nonlinearity | ±1/2 LSB maximum |
| SINAD | 72 dB minimum with a 1 kHz input |
| Reference Source | Internal or external reference |
| Data Output | Parallel and serial |
| پاکێج | 28-pin SOIC |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی ADS7806U 28-pin soic
ڕێکخستنی پین بۆ ADS7806U (پاکێجی 28-pin soic). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS7806U.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ADS7806U گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Acquisition, Battery-Powered Monitoring, Data Acquisition Systems, Process Control Loops, Laboratory Instrumentation, Embedded Control Panels.
Industrial Sensor Acquisition
The ADS7806U suits industrial sensor acquisition when 12-bit measurement resolution is sufficient and each channel must refresh quickly. Its 25 µs maximum acquisition-and-conversion time allows frequent readings, while the single +5 V supply simplifies system power architecture. A 0 V to +5 V input range can accommodate conditioned current, voltage, position, and level signals. For factory equipment, place the analog input path away from motor and switching traces, use local filtering, and verify source-impedance settling before each conversion. Power-down operation at 50 µW can reduce consumption between measurements when the host controls the duty cycle.
پێشنیارکراو
Battery-Powered Monitoring
The ADS7806U is appropriate for battery-powered environmental or asset-monitoring systems where a 12-bit result provides useful measurement detail without requiring a high-resolution converter. Maximum power dissipation is 35 mW, and power-down mode limits consumption to 50 µW when sampling is intermittent. The device can operate from a single +5 V rail and accepts a 0 V to +4 V range in addition to 0 V to +5 V. Designers should still include regulator efficiency, reference stability, leakage from external analog switches, and sensor standby current in the complete power budget.
پێشنیارکراو
Data Acquisition Systems
The ADS7806U works well in compact data-acquisition modules that need deterministic conversion and flexible output routing. Parallel output can connect efficiently to a microcontroller or programmable logic, while serial output reduces the number of traces where board space is constrained. The 25 µs maximum acquisition-and-conversion time supports rapid sequential sampling, and the supported 0 V to +5 V, 0 V to +4 V, and ±10 V ranges support different external signal-conditioning networks. For multi-channel systems, carefully budget settling time, isolation, reference sharing, and acquisition timing rather than treating channel multiplexing as instantaneous.
پێشنیارکراو
Process Control Loops
The ADS7806U can digitize pressure, temperature, level, and actuator-feedback signals in compact process-control equipment. Its 12-bit resolution corresponds to 4096 quantization levels, which is useful when system accuracy is dominated by sensors, references, and analog signal conditioning rather than converter resolution alone. The 72 dB minimum SINAD specification at 1 kHz provides a baseline for dynamic performance evaluation. Keep the analog front end close to the converter, provide low-noise reference decoupling, and isolate high-current actuator paths to prevent switching transients from corrupting the measured control variable.
پێشنیارکراو
Laboratory Instrumentation
The ADS7806U is suitable for compact laboratory instruments that monitor slow or moderate-bandwidth analog signals, including bench supplies, calibrators, and diagnostic equipment. Its selectable input ranges make it adaptable to scaled sensor outputs and ±10 V interface signals, while internal or external reference operation supports different measurement strategies. A 25 µs conversion time can support responsive meter updates. The instrument should include input protection, antialias filtering, calibration, and a defined reference arrangement. For accuracy-critical measurements, evaluate offset, gain, integral nonlinearity, differential nonlinearity, and noise rather than relying only on nominal resolution.
پێشنیارکراو
Embedded Control Panels
The ADS7806U can serve as the measurement converter in embedded control panels that combine analog inputs with a host microcontroller. Its low-power design, single +5 V operation, and selectable parallel or serial interfaces make it adaptable to different processor architectures. Serial mode simplifies wiring in space-constrained panels, while parallel mode can reduce transfer overhead when the interface controller has sufficient pins. Keep clock and data traces away from the reference and analog input, use a defined return path for reference current, and account for the 25 µs conversion interval in the display and control-update schedule.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADS7806U — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ADS7807U | ADS7825U | ADS7806U/1K |
|---|---|---|---|---|
| Package | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 12 bit | 16 bit | 12 bit | 12 bit |
جیاکەرەوە سەرەکییەکان
- Lower nominal resolution than the pin-compatible ADS7807U (بەراورد بەADS7807U)
- Explicit parallel and serial output support (بەراورد بەADS7825U)
- Documented low-power operating characteristics (بەراورد بەADS7807U)
تێبینییەکانی دیزاین
Place input, reference, and supply-decoupling capacitors close to their associated pins. Route the analog input directly to the converter and keep it away from clock, serial-data, and parallel-output nets. For sensitive measurements, use a continuous ground reference beneath the analog section and avoid splitting ground planes unless the complete system return-current plan has been evaluated.
Check the external source impedance and acquisition time together. The sampling network must settle within the 25 µs maximum acquisition-and-conversion interval; otherwise, successive results can depend on the previous conversion. Add a suitable RC anti-alias network close to the input when the source impedance is high, and validate the resulting bandwidth against the required signal bandwidth.
Do not equate the ±10 V input range with a negative supply requirement. The ADS7806U uses a single +5 V supply and requires external conditioning for bipolar signals. Also avoid assuming that the ADS7807U is functionally identical: although it is manufacturer-described as pin-compatible with the ADS7806, its 16-bit resolution can change timing, accuracy, and firmware requirements.
Include the converter's maximum 35 mW dissipation, reference circuitry, signal-conditioning loads, and interface overhead in the analog power budget. For intermittent operation, control power-down carefully so that wake-up and acquisition timing are included in the sampling schedule. Verify regulator efficiency and reference startup behavior at the lowest operating supply voltage.
زانیاری پابەندبوون
Compliance status requires confirmation from the current manufacturer product documentation or supplier declarations.