Texas Instruments

ADS7810U - 12-Bit 800 kHz SAR ADC | Texas Instruments

MPN: ADS7810U ✓ چالاک
±5 V Vdss 28-pin SOIC Package
MOQ: 1 |

ADS7810U گشتی

Texas Instruments ADS7810U is a 12-bit successive-approximation-register analog-to-digital converter with a sampling rate of 800 kSPS, a 1.25 µs throughput time, and a single-ended analog input in a 28-pin SOIC package. It accepts a standard ±10 V input range and uses a parallel data interface with latches for transferring converted results. The converter also includes an internal reference, sample-and-hold circuit, and clock circuitry.

An ADC is a data-conversion IC that transforms an analog voltage into a digital code for measurement, control, monitoring, or signal-processing systems. The ADS7810 belongs to the hierarchy of ADC, data-converter IC, signal-processing IC, and semiconductor. Its SAR architecture repeatedly compares the sampled input with an internal DAC, determining one output bit during each conversion step. This makes it appropriate for relatively high-speed industrial instrumentation where serial-interface overhead is undesirable.

Key performance characteristics include 12-bit resolution, 800 kSPS sampling, ±3/4 LSB maximum integral nonlinearity, ±1 LSB maximum differential nonlinearity, and minimum SINAD of 69 dB with a 250 kHz input. The ±10 V input range supports direct acquisition of bipolar industrial signals. A 5 V digital supply supports compatibility with conventional parallel digital logic, while the analog supply operates from ±5 V according to the product description.

The integrated sample-and-hold, reference, clock, and latched parallel outputs reduce the number of external support functions required. The 28-pin SOIC package is larger than modern fine-pitch packages but remains practical for through-hole assembly and moderate-density mixed-signal boards. Because the converter uses a parallel interface, its 12 output data lines require careful routing and adequate grounding to avoid logic coupling into the high-impedance analog input.

Typical uses include industrial process monitoring, instrumentation, waveform capture, laboratory equipment, and embedded data-acquisition systems. Engineers should treat the analog input as a high-impedance node, provide adequate bypassing at the supply pins, and preserve the converter’s specified input-voltage limits. The ADC is not intended for signals outside its ±10 V range without suitable external attenuation or protection.

A primary design consideration is signal conditioning. The source impedance, acquisition time, and input-network capacitance determine whether the sampled voltage can settle accurately within the converter’s acquisition interval. Short traces, guarding, clean references, and separated analog and digital return paths are especially important when converting small signals at high throughput.

This page combines the manufacturer-linked datasheet information with a practical focus on acquisition timing, input conditioning, layout, and verified drop-in comparisons. It also distinguishes true same-package replacements from broader functional equivalents so engineers can assess PCB-reuse risk before selecting an alternative.

جێگرەوەکانی جێگۆڕکێ بۆ ADS7810U — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS7810U (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Sampling Rate, Architecture, Reference, SINAD.

Texas Instruments
Package: 28-SOIC (7.50 mm body width)
Sampling Rate: 800 kHz
Architecture: SAR (Successive Approximation Register)
Texas Instruments
Package: 28-pin SOIC (DW) - wide body
Sampling Rate: 800 kHz (max)
Architecture: SAR with inherent S/H
بەراوردکردن لەگەڵ ADS7810U →
Texas Instruments
Architecture: Successive-approximation register (SAR)
بەراوردکردن لەگەڵ ADS7810U →

ADS7810UB

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 28-pin SOIC
12 bits · 800 kHz (max) · 1.25 µs · ±10 V (standard) · 69 dB (min) at 250 kHz input · ±3/4 LSB · ±1 LSB · SAR with inherent S/H

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ADS7819UB

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 28-pin SOIC
12 bit · 800 kSPS · 1 channel · Successive-approximation register (SAR) · 12-bit parallel output · 28-pin SOIC · 28 terminals · Rectangular

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ADS7819PB

✅ جێگرەوەی ڕاستەوخۆ
📦 28-pin SOIC
Same 28-pin SOIC footprint and documented complete replacement; P-versus-U ordering-suffix grade differs while core acquisition characteristics remain comparable.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ADS7810U زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Converter Type Successive Approximation Register (SAR) ADC
وردی 12 bit
ڕێژەی نموونەگرتن 800 kSPS
Throughput Time 1.25 µs
Input Configuration Single-ended, 1 input
Input Range ±10 V
Analog Supply Voltage ±5 V
Digital Supply Voltage 5 V
SINAD 69 dB minimum with 250 kHz input
Integral Nonlinearity ±3/4 LSB maximum
Differential Nonlinearity ±1 LSB maximum
Reference Internal reference
Data Interface Parallel data interface with latches
Integrated Functions Sample-and-hold, reference, clock, and output latches
مەودای پلەی گەرمیی کارکردن -40 °C to +70 °C
پاکێج 28-pin SOIC
جۆری دامەزراندن Through-hole surface-mount SOIC

ڕێنمایی ڕێکخستنی پینی ADS7810U 28-pin soic

ڕێکخستنی پین بۆ ADS7810U (پاکێجی 28-pin soic). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 28-pin soic بۆ ADS7810U

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS7810U.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ADS7810U گونجاوە بۆ 6 بەکارھێنانs: Industrial Process Monitoring, Laboratory Data Acquisition, Waveform Capture Systems, Embedded Control and Measurement, Audio and Communication Signal Analysis, Power and Industrial Control Monitoring.

🏭

Industrial Process Monitoring

The ADS7810U is appropriate for acquiring bipolar sensor signals in industrial process-monitoring equipment because it accepts a ±10 V input and converts the result at up to 800 kSPS with 12-bit resolution. Place the converter behind a protected analog front end that scales the sensor voltage, limits transients, and presents a suitable source impedance. Its 1.25 µs throughput time supports fast sampling, while the 69 dB minimum SINAD specification applies to a 250 kHz input condition. Use a latched parallel interface when a nearby controller or FPGA can capture the 12-bit result efficiently.

🔧

Laboratory Data Acquisition

In a laboratory instrument, the ADS7810U can digitize bipolar waveforms while preserving the convenience of a direct ±10 V analog range. Its 800 kSPS conversion capability and 12-bit resolution provide a practical balance between acquisition speed and measurement resolution. The internal reference, sample-and-hold circuit, clock, and latched outputs reduce the support circuitry needed for a standalone measurement channel. Route the analog input through a short buffered path, keep high-impedance nodes away from digital outputs, and follow the manufacturer’s grounding arrangement to avoid degrading the specified INL and DNL.

📈

Waveform Capture Systems

The ADS7810U suits moderate-speed waveform capture because it samples at up to 800 kSPS and delivers 12-bit parallel data with output latches. A capture engine can transfer each sample directly into logic or a digital buffer without serial-interface overhead, making the converter useful in educational instruments, vibration monitoring, and compact analysis equipment. The analog front end must satisfy the acquisition-time and source-impedance requirements of the SAR architecture. Use a low-capacitance protection network and short analog traces to prevent settling errors that could otherwise affect code accuracy.

🖥️

Embedded Control and Measurement

For embedded control systems, the ADS7810U can convert an analog feedback or measurement signal into a 12-bit code at 800 kSPS. The parallel outputs are useful where the controller uses a dedicated data bus, and the ±10 V range simplifies interfacing with standardized bipolar signals. System partitioning is important: digital control signals should not be routed beside the analog input, and the ADC supply pins should have local decoupling. The 28-pin SOIC footprint also makes the converter suitable for boards assembled with conventional through-hole-compatible SOIC handling rather than very fine-pitch automated placement.

🌐

Audio and Communication Signal Analysis

The ADS7810U can serve as the acquisition element in communication and audio test equipment when the signal lies within its ±10 V bipolar range. Its 800 kSPS sample rate supports analysis of signals below the Nyquist limit, with the usable bandwidth and dynamic range also determined by the analog front end, noise, and conversion performance. Use anti-alias filtering before the ADC and avoid loading the input with unnecessary capacitance. Because the converter has a parallel data interface, system partitioning should keep the digital output bus away from the sensitive input and reference nodes.

⚡

Power and Industrial Control Monitoring

The ADS7810U is useful for monitoring analog nodes in power and industrial control equipment after appropriate scaling and protection. A ±10 V input range can accept bipolar feedback signals, and the 12-bit, 800 kSPS conversion capability allows rapid sampling of changing system conditions. The internal reference, clock, sample-and-hold circuit, and latches simplify implementation compared with a discrete SAR ADC design. For safety-critical installations, apply independent clamping and isolation as required by the system; the ADC rating itself does not establish compliance with a particular industrial safety standard.

What are the key specifications of ADS7810U that engineers should know?
The ADS7810U is a 12-bit, single-input SAR ADC capable of 800 kSPS conversion with a 1.25 µs throughput time. According to the ADS7810U datasheet, it accepts a bipolar ±10 V input, provides a latched parallel interface, and includes a sample-and-hold circuit, internal reference, and clock. The converter is packaged in 28-pin SOIC. Its specified nonlinearity limits are ±3/4 LSB for INL and ±1 LSB for DNL, making it suitable for instrumentation and process-control designs.
What is the operating voltage range of ADS7810U?
The ADS7810U uses a ±5 V analog supply and a 5 V digital supply. Its signal input range is ±10 V, allowing it to acquire bipolar analog voltages directly. The analog and digital supplies are separate functions even though both appear in the same package, so each supply domain should receive appropriate local bypassing and a clean return connection. The 12-bit and 800 kSPS performance figures are documented in the ADS7810U datasheet and apply to the stated operating configuration.
Where can I download the ADS7810U datasheet PDF?
The ADS7810U datasheet is available through the linked PDF page at Alldatasheet and through Texas Instruments’ cross-reference resources for locating official documentation. The document identifies the device as a 12-bit, 800 kSPS sampling CMOS analog-to-digital converter with ±10 V input range, internal reference, sample-and-hold circuitry, latched parallel outputs, and a 28-pin SOIC package. Use the manufacturer datasheet as the controlling document when checking pin functions, timing, limits, and application circuitry.
Where can I find the ADS7810U pinout?
The ADS7810U pinout is documented in the pin-description table and package drawing in the ADS7810U datasheet. The device uses a 28-pin SOIC package and a parallel output interface, so board layout must reserve connections for the analog input, analog and digital supplies, ground pins, control signals, and 12 output-data lines. Consult the pin-description table when assigning tracks; this page does not reproduce a pin table because a complete manufacturer-authored pin map is not available in the cited excerpts.
What can replace the ADS7810U on the same PCB?
ADS7810UB is the closest documented same-package replacement because it retains the 28-pin SOIC format and is described as completely replaceable with consistent terminals and package characteristics. ADS7819UB and ADS7819PB are also listed as same-package comparison candidates, but their electrical parameters and temperature grades should be checked before substitution. Only candidates with the same footprint and verified function should be treated as drop-in replacements; functional-equivalent parts in another package require PCB changes.
Is ADS7810UB a drop-in replacement for ADS7810U?
ADS7810UB is a documented drop-in candidate for ADS7810U because it uses the same 28-pin SOIC package and is described as having consistent terminals and package characteristics. Its principal engineering distinction is the package suffix, which can encode a different qualification or temperature treatment rather than a different converter function. Before production use, verify the exact ordering code, temperature range, lifecycle status, and AC performance against the current Texas Instruments datasheet.
ADS7810U vs ADS7819UB — which is better for a parallel-data acquisition board?
ADS7810U and ADS7819UB both use a 28-pin SOIC package and are described as completely replaceable, making ADS7819UB the more direct same-footprint option to evaluate. Selection should not rely on package match alone: compare resolution, conversion time, input range, reference implementation, timing, and temperature grade. Choose ADS7810U when its documented 12-bit, 800 kSPS, ±10 V configuration matches the system; choose ADS7819UB only after its complete datasheet confirms equivalent electrical requirements.
When should I choose ADS7810U instead of ADS7819UB?
Choose ADS7810U when the system specifically depends on its documented 12-bit resolution, 800 kSPS sampling rate, 1.25 µs throughput time, ±10 V input range, and ±5 V analog supply. ADS7819UB may suit a design when its datasheet confirms equivalent acquisition performance and the exact ordering suffix meets environmental requirements. Because ADS7819UB is presented as completely replaceable, the practical decision is between verified electrical equivalence and lifecycle, qualification, and availability requirements.
Is ADS7810U suitable for industrial process measurement?
The ADS7810U is suitable for many industrial process-measurement channels because it combines 12-bit resolution, 800 kSPS sampling, a ±10 V bipolar range, and 69 dB minimum SINAD with a 250 kHz input. Its parallel interface is useful where data can be captured by nearby digital logic. For sensor inputs below the ADC range, use a protected signal-conditioning front end that limits overvoltage, controls source impedance, and keeps the selected ADC in its linear operating region.
How much power and thermal design consideration does ADS7810U need?
ADS7810U should be evaluated using its analog and digital supply currents and the package thermal data in the manufacturer datasheet. Estimated: P_D approximately equals 5 V times I_DD plus 5 V times the magnitude of I_A- minus 5 V times the magnitude of I_A+ when both analog rails are used; the exact result depends on operating conditions. Keep copper and thermal paths effective, and use the datasheet’s maximum junction and ambient temperature limits when defining the operating envelope.
What input-network and layout practices improve ADS7810U accuracy?
Use a short, guarded analog-input trace, connect the source through a network that preserves settling during acquisition, and place input protection close to the ADC pins. Route the 12 parallel outputs away from the analog input and reference connections, while joining analog and digital grounds according to the manufacturer’s recommended application circuit. Local supply bypassing and a quiet layout help the converter achieve its stated INL, DNL, and SINAD performance, particularly when converting small signals.
Is ADS7810U compliant with RoHS and REACH?
The RoHS and REACH status of ADS7810U must be confirmed in the current Texas Instruments product or material-compliance declaration for the exact ordering code. The manufacturer’s RoHS and REACH information, including any applicable exemptions, is the controlling authority for a procurement decision. A distributor product listing does not replace the manufacturer declaration. Request the compliance documents for the selected package and grade before release to production.
Where can I buy ADS7810U and check its current lead time?
Use the Request a Quote form on this page to request current ADS7810U availability, quantity breaks, lead time, and the desired shipping format. The current commercial response should reflect the selected 28-pin SOIC ordering code and quantity. The target is listed in current distributor catalogs, but a catalog entry alone does not establish guaranteed stock or a delivery schedule, so confirm those terms directly through the quote request.
What is the price of ADS7810U?
The current ADS7810U price depends on order quantity, package suffix, and supplier inventory conditions. Use the Request a Quote form on this page to obtain a current quotation and confirm quantity breaks. The product is identified in distributor listings as a 12-bit, 800 kSPS SAR ADC in a 28-pin SOIC package, but those listings should not be treated as a fixed commercial offer without current confirmation.
Is ADS7810U in stock and what lead time should I plan for?
Current ADS7810U stock and lead time should be confirmed through the Request a Quote form on this page using the exact desired quantity and package variant. Distributor catalog and search pages can change as inventory moves, so they do not provide a durable allocation commitment. For production planning, request the manufacturer part number, reel or tube preference, delivery location, and expected consumption profile when requesting the quotation.
How does ADS7810U compare with ADS7810U-1?
ADS7810U and ADS7810U-1 are both listed as 12-bit ADC versions in 28-pin SOIC packages, but the suffix difference must be checked against the manufacturer ordering table before making a substitution. ADS7810U is documented with 800 kSPS sampling and a 1.25 µs throughput time. The -1 version may denote a different temperature grade or ordering treatment, so verify operating temperature, qualification, marking, and lifecycle status rather than assuming suffix equivalence.

داتای سەرچاوەی ئەندازیاری بۆ ADS7810U — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose ADS7810U when the design requires a 12-bit SAR ADC with an 800 kSPS conversion rate, 1.25 µs throughput, ±10 V bipolar input, parallel latched outputs, and a 28-pin SOIC footprint. It is well suited to industrial monitoring, laboratory instrumentation, and embedded acquisition systems that already provide compatible ±5 V analog and 5 V digital rails. ADS7810UB is the closest documented drop-in candidate and should be evaluated first when the suffix represents the required grade or ordering treatment. ADS7819UB and ADS7819PB use the same 28-pin SOIC package and are described as complete replacements, but their acquisition, reference, timing, and environmental details must be confirmed before substitution. For designs using another package or a serial interface, functional equivalence does not justify calling the part drop-in; PCB changes and firmware or logic changes would be required.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە ADS7810UB ADS7819UB ADS7819PB
Package 28-pin SOIC 28-pin SOIC 28-pin SOIC 28-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments

جیاکەرەوە سەرەکییەکان

  • Directly documented 800 kSPS conversion performance (بەراورد بەADS7819UB)
  • Bipolar ±10 V acquisition range (بەراورد بەADS7819PB)
  • Documented 12-bit accuracy limits (بەراورد بەADS7810UB)

تێبینییەکانی دیزاین

Keep the analog-input trace short and route it away from the 12 parallel output lines, clock signals, and supply switching nodes. Use a continuous ground reference beneath the analog section, terminate unused digital inputs according to the manufacturer logic recommendations, and place input protection close to the connector. A guarded or properly buffered source helps preserve acquisition accuracy and reduces susceptibility to leakage, crosstalk, and source-impedance errors.

Follow the manufacturer application circuit for analog and digital supply bypassing. The ADS7810U operates from ±5 V analog and 5 V digital rails, so provide local, high-frequency decoupling at the supply pins and keep analog return current separate from high-current digital paths where practical. Estimate total dissipation from the actual supply currents and worst-case input code before defining board-level thermal limits; do not rely on nominal current alone.

Do not treat the ±10 V input range as an overvoltage tolerance. The input must remain within the absolute maximum and operating limits, and transients from motors, relays, or industrial cabling require external protection. Also verify that the signal source can settle during the acquisition interval. An excessively high source impedance or excessive input capacitance can create conversion errors even when the converter itself is operating correctly.

The parallel interface simplifies data capture but increases pin and routing density. Assign the 12 data outputs to a logically grouped digital region, preserve the output latch timing specified by the datasheet, and avoid breaking the analog ground reference beneath the converter. Maintain a quiet reference and supply layout around the ADC. If both analog rails are required, verify their sequencing and bypass-network recommendations in the application section of the manufacturer datasheet.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Compliance status requires confirmation from the current Texas Instruments product declaration for the exact ordering code. No RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 claim is established by the cited excerpts.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ADS7810U datasheet ADS7810U specifications ADS7810U pinout ADS7810U datasheet pdf ADS7810U equivalent ADS7810U replacement ADS7810U cross reference ADS7810U vs ADS7819UB Texas Instruments ADS7810U ADS7810U 12 bit 800 kSPS ADC ADS7810U 28 pin SOIC ADS7810U price

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments ADS7810U ADS7810UB ADS7819UB ADS7819PB analog-to-digital converter ADC successive approximation register SAR data-conversion IC signal-processing IC semiconductor 12-bit resolution 800 kSPS 1.25 µs throughput time ±10 V input range parallel data interface sample-and-hold internal reference integral nonlinearity differential nonlinearity SINAD 28-pin SOIC industrial process monitoring instrumentation
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ