Texas Instruments

ADS7811U - 16-Bit 250 kSPS SAR ADC | Texas Instruments

MPN: ADS7811U ✓ چالاک
28-pin SOIC Package Internal clock Speed
MOQ: 1 |

ADS7811U گشتی

The Texas Instruments ADS7811U is a 16-bit, 250 kSPS, single-channel successive-approximation analog-to-digital converter with a single-ended input, housed in a 28-pin SOIC package. It combines a capacitor-based SAR converter, an inherent sample-and-hold circuit, a precision internal reference, and an internal clock in one analog signal-conditioning device. The ADS7811U is intended for industrial instrumentation, process control, data acquisition, sensor measurement, and embedded systems that require accurate conversion of a single bipolar or unipolar analog signal.

An ADC converts a continuously varying analog voltage into a numeric code for processing, measurement, or control. The ADS7811 uses a successive-approximation architecture, where an internal capacitor array and successive bit trials produce one conversion result after each sample. The 16-bit resolution provides 65,536 possible codes, while the 250 kSPS throughput rate supports signal monitoring and control loops. Its single-ended input simplifies connection to sensors and signal-conditioning circuits compared with a differential-input converter.

The principal device characteristics are 16-bit resolution, a 250 kSPS conversion rate, one single-ended analog input, and the 28-pin SOIC package. According to the manufacturer product page and datasheet, the design is intended to provide excellent AC performance and a spurious-free dynamic range exceeding typical expectations for a 100 kHz full-scale sine-wave input. The internal reference and clock reduce external component count and help simplify system design, while the wide operating and temperature options support industrial equipment.

Typical deployments include industrial process-control loops, factory automation, environmental monitoring, portable instrumentation, and embedded data loggers. In each case, the converter sits between an analog sensor or signal-conditioning network and a digital controller or communications interface. The ADS7811U is appropriate when a compact, single-channel, moderate-speed SAR ADC is preferable to a higher-speed, higher-channel-count converter.

For layout, place input, reference, and decoupling capacitors close to their associated pins and route analog and digital return currents carefully. The analog input must remain within the device’s specified input range, and the system should account for acquisition time, settling behavior, and the relationship between input impedance and sampling dynamics. Review the manufacturer datasheet pin description table and the recommended application circuit before finalizing PCB connections.

This product page combines the manufacturer specifications, package information, practical application guidance, and drop-in comparison context to support faster engineering selection and sourcing.

جێگرەوەکانی جێگۆڕکێ بۆ ADS7811U — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS7811U (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Architecture, Operating Temperature Range, Internal Reference, Resolution.

Texas Instruments
Package: 28-pin PDIP (0.3-inch DIP-28)
Architecture: SAR (Successive Approximation Register)
Operating Temperature Range: -40 °C to +85 °C
بەراوردکردن لەگەڵ ADS7811U →
Texas Instruments
Package: 28-pin SOIC (DW)
Architecture: Successive-approximation register (SAR)
Operating Temperature Range: -40 °C to 85 °C
بەراوردکردن لەگەڵ ADS7811U →
Texas Instruments
Package: 20-pin SOIC (DW)
بەراوردکردن لەگەڵ ADS7811U →
Texas Instruments
Package: 28-SOIC (DW)
Architecture: Successive Approximation Register (SAR)
Operating Temperature Range: -40C to +85C
Texas Instruments
Package: 28-SOIC (DW) 7.5 mm body width
Architecture: SAR (Successive Approximation Register)
Operating Temperature Range: -25 °C to +85 °C

ADS7807U

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 28-pin SOIC
16 bits · 40 kSPS · 1 input · Successive-approximation register (SAR) · 4.75 V to 5.25 V · 35 mW maximum · 50 µW · 25 µs maximum

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ADS7809U

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 28-pin SOIC
Successive Approximation Register (SAR) ADC · 16 bit · 100 kHz · 10 us · 86 dB with 20 kHz input · ±2 LSB · 16 bit with no missing codes · 6 specified input ranges

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ADS7811U/1K

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Texas Instruments
📦 28-pin SOIC
16 bits · Successive Approximation Register (SAR) · 1 (single-ended) · 250 kSPS · 4 us (typical) · 0.0092 % (max) · 0 V to VREF or ±10 V (bipolar mode) · 5 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ADS7807P

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Texas Instruments
📦 28-pin SOIC
16 bit · SAR (Successive Approximation Register) · 1 single-ended / 1 pseudo-differential · 40 kSPS · ±10 V, 0 V to +5 V, 0 V to +4 V · ±1.5 LSB max · 16 Bits, No Missing Codes · 86 dB min at 1 kHz input

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ADS7809U

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Texas Instruments
📦 28-pin SOIC
Successive Approximation Register (SAR) ADC · 16 bit · 100 kHz · 10 us · 86 dB with 20 kHz input · ±2 LSB · 16 bit with no missing codes · 6 specified input ranges

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ADS7811U زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

وردی 16 bit
ڕێژەی نموونەگرتن 250 kSPS
Converter Type Successive-approximation SAR ADC
Number of Analog Inputs 1
Input Type Single-ended
Architecture Capacitor-based SAR with sample-and-hold
Internal Reference Precision internal reference
Internal Clock Internal clock
پاکێج 28-pin SOIC
جۆری دامەزراندن Surface mount
Sample-and-Hold Inherent sample-and-hold
Throughput 250 kHz

ڕێنمایی ڕێکخستنی پینی ADS7811U 28-pin soic

ڕێکخستنی پین بۆ ADS7811U (پاکێجی 28-pin soic). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 28-pin soic بۆ ADS7811U

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS7811U.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ADS7811U گونجاوە بۆ 6 بەکارھێنانs: Industrial Process Measurement, Factory Automation and Control, Environmental Monitoring, Portable Data Acquisition, Precision Analog Monitoring, Power and Equipment Monitoring.

🏭

Industrial Process Measurement

The ADS7811U fits single-loop process measurement when the sensor produces a conditioned analog voltage and the controller requires 16-bit conversion resolution. Its 250 kSPS sampling rate provides useful responsiveness for temperature, pressure, level, and flow monitoring without the complexity of a high-channel-count converter. Place the sensor signal through a low-pass filter and input protection network, then use the ADC output for filtering or calibration in the controller. The single-ended input simplifies wiring, but the analog input range, signal ground, and acquisition settling requirements must be checked in the manufacturer datasheet.

🏭

Factory Automation and Control

ADS7811U is suitable for factory automation modules that monitor one analog process variable and return a digital measurement to a controller. The 16-bit code width can preserve small signal changes after conditioning, while the 250 kSPS rate supports responsive sampling of relatively slow industrial variables. Use an RC anti-alias filter close to the analog input and keep the reference and supply return paths compact. Firmware can apply offset, gain, and temperature compensation, but the converter, sensor, and reference errors must be calibrated together to maintain useful absolute accuracy.

🌐

Environmental Monitoring

The ADS7811U can digitize conditioned outputs from environmental sensors such as gas, humidity, pressure, and water-level probes. Its 16-bit resolution is valuable when the usable sensor signal occupies only part of the converter range, while 250 kSPS throughput is more than adequate for periodic measurements and trend logging. A low-noise reference and careful grounding help preserve small changes over time. Select input protection appropriate for field wiring, keep sensor excitation and ADC routing separated from switching nodes, and implement sensor-specific calibration in the data-processing layer.

📱

Portable Data Acquisition

ADS7811U is appropriate for compact battery-powered data loggers that acquire one or several sequentially multiplexed analog channels. The 250 kSPS rate supports rapid sampling, while the internal reference and clock reduce the number of external support components needed for a portable prototype. Low-power operation should be evaluated from the device supply-current specifications, because the converter operating state and external sensor duty cycle can dominate the total energy budget. Use controlled shutdown, local decoupling, and buffered sensor outputs to avoid excessive settling time or conversion errors after wake-up.

🔧

Precision Analog Monitoring

For laboratory and bench instrumentation, ADS7811U provides a compact way to acquire a single precision analog node with 16-bit digital resolution. It can monitor bridge outputs, potentiometer positions, laboratory sensor signals, or slow precision waveforms after suitable filtering. The single-ended architecture keeps the analog circuit understandable, while the 250 kSPS rate permits repeated measurements and waveform reconstruction within the stated bandwidth. For high-precision work, account for reference drift, offset and gain error, source impedance, and the acquisition period required by the SAR front end.

⚡

Power and Equipment Monitoring

ADS7811U can be used to monitor a scaled voltage representing power, current, temperature, or equipment health. Its 16-bit resolution can detect small changes when the signal is amplified to use most of the ADC range, and the 250 kSPS throughput supports current or trend monitoring. The analog input still needs scaling, filtering, and protection appropriate to the power stage. Keep the divider or amplifier away from high-current paths, maintain a quiet ground reference, and validate that transient events do not force the sampled input outside the manufacturer’s absolute limits.

کورتەی بەرهەمە پێشنیارکراوەکان

OPA132UA Texas Instruments بەکارهێنراوە لە: Industrial Process Measurement, Precision Analog Monitoring ISO1042B Digital isolator for separating measurement and control domains بەکارهێنراوە لە: Industrial Process Measurement STM32F103C8T6 STMicroelectronics بەکارهێنراوە لە: Industrial Process Measurement, Industrial Process Measurement STM32F103R6T6ATR STMicroelectronics بەکارهێنراوە لە: Factory Automation and Control TLV2402ID Texas Instruments بەکارهێنراوە لە: Factory Automation and Control PCA9554DWR Texas Instruments بەکارهێنراوە لە: Factory Automation and Control STM32L051K8T6 STMicroelectronics بەکارهێنراوە لە: Environmental Monitoring OPA875ID Texas Instruments بەکارهێنراوە لە: Environmental Monitoring MCP3424-E/SL Microchip Technology بەکارهێنراوە لە: Environmental Monitoring, Power and Equipment Monitoring STM32L031K6T7 STMicroelectronics بەکارهێنراوە لە: Portable Data Acquisition MCP608-I/SN Microchip Technology بەکارهێنراوە لە: Portable Data Acquisition MAX20017AEBU+ Regulator-related power-management companion for portable systems بەکارهێنراوە لە: Portable Data Acquisition MCP6043-E/P Microchip Technology بەکارهێنراوە لە: Precision Analog Monitoring STM32F103C6T6ATR STMicroelectronics بەکارهێنراوە لە: Precision Analog Monitoring INA155UA Texas Instruments بەکارهێنراوە لە: Power and Equipment Monitoring PCA9538PWR NXP Semiconductors بەکارهێنراوە لە: Power and Equipment Monitoring
What is the ADS7811U?
The ADS7811U is a Texas Instruments 16-bit, 250 kSPS, single-channel SAR analog-to-digital converter with a single-ended input in a 28-pin SOIC package. According to the manufacturer product page, it uses a capacitor-based SAR architecture with an inherent sample-and-hold circuit, a precision internal reference, and an internal clock. It is suitable for industrial instrumentation, sensor measurement, process control, and embedded data acquisition systems.
What is the conversion speed of ADS7811U?
The ADS7811U converts at 250 kSPS, or 250,000 samples per second, according to the Texas Instruments product page and manufacturer datasheet. This throughput is appropriate for moderately fast measurement and control systems, while remaining well suited to single-channel sensor monitoring. Actual system throughput can be lower if the host interface, acquisition timing, or signal-conditioning network introduces additional latency.
What is the resolution of ADS7811U?
The ADS7811U provides 16-bit resolution, representing an analog signal with 65,536 digital codes. The manufacturer identifies the converter as a 16-bit sampling ADC. Resolution alone does not determine accuracy: the usable system precision also depends on input conditioning, reference accuracy, noise performance, linearity, grounding, and the selected analog input range.
Is ADS7811U a single-ended or differential ADC?
ADS7811U is a single-ended ADC with one analog input, according to the Texas Instruments product page. It uses one input signal referenced to the device ground rather than a differential pair. This arrangement can simplify sensor wiring and analog front-end design, although common-mode range, grounding, and input protection must be checked against the datasheet limits.
Where can I download the ADS7811 datasheet PDF?
The official ADS7811 datasheet can be accessed through the Texas Instruments datasheet link on this page. The manufacturer provides the complete technical information, including architecture, electrical characteristics, timing, pin descriptions, application information, and package details. Use the manufacturer document rather than a distributor mirror when making design decisions, and confirm the ordering suffix and package associated with ADS7811U.
Where can I find the ADS7811U pinout?
The ADS7811U pinout is defined in the pin configuration and pin-description sections of the manufacturer datasheet. The device uses a 28-pin SOIC package, so the physical footprint has 28 terminals. For PCB work, use the datasheet pin table to distinguish power, ground, analog input, reference, clock, and digital interface connections rather than inferring pin functions from the package outline.
What is the difference between ADS7807U and ADS7811U?
The ADS7807U and ADS7811U are both Texas Instruments single-channel SAR ADCs, but their electrical and performance details must be compared before substitution. The verified comparison identifies them as related alternatives, while the manufacturer describes ADS7811 as a 16-bit, 250 kSPS device with a single-ended input. Verify input range, interface timing, reference behavior, package pinout, and timing requirements against both datasheets before treating either part as interchangeable.
What is the difference between ADS7809U and ADS7811U?
ADS7809U is listed in the verified comparison material as a related ADS7811U alternative. The key decision factors are resolution, throughput, input range, reference implementation, digital interface, power requirements, and package pin compatibility. ADS7811U is identified by Texas Instruments as a 16-bit, 250 kSPS, single-ended SAR ADC; confirm the corresponding ADS7809U ratings and pin assignments in its own datasheet before redesigning around it.
When should I choose ADS7811U over ADS7807U?
Choose ADS7811U when the design benefits from its documented 16-bit, 250 kSPS, single-ended SAR conversion capability and the exact timing and electrical characteristics of the ADS7811 family. Choose ADS7807U only after confirming that its resolution, throughput, input range, interface timing, and package pinout satisfy the application. The comparison material supports evaluating the two parts, but it does not by itself establish universal interchangeability.
Is ADS7811U suitable for industrial sensor measurement?
Yes, ADS7811U is suitable for many industrial sensor-measurement applications because it provides 16-bit resolution and 250 kSPS throughput in a single-channel package. A practical implementation usually includes sensor excitation or biasing, an anti-alias filter, input protection, and a stable reference arrangement. The final suitability depends on sensor range, common-mode voltage, required accuracy, calibration method, and the operating-temperature specification.
What is the best drop-in replacement for ADS7811U?
The closest verified candidates are ADS7807U and ADS7809U, but no candidate should be called a drop-in replacement until its pinout and key parameters have been checked against ADS7811U. The verified comparison material identifies both as alternatives and references package type, RoHS, and REACH considerations. Confirm pin-to-pin compatibility, input range, resolution, throughput, reference, interface timing, and supply requirements in the manufacturer documentation.
Can ADS7807U replace ADS7811U in an existing PCB?
ADS7807U may be considered for a redesign only after its datasheet confirms the same 28-pin SOIC footprint and pin functions, because cross-reference listings alone do not prove pin compatibility. ADS7811U is specified as a 16-bit, 250 kSPS, single-channel SAR ADC. Compare the candidate’s conversion rate, input range, reference, digital interface, power rails, and acquisition timing before approving the substitution.
What are the key specifications of ADS7811U that engineers should know?
The key ADS7811U specifications are 16-bit resolution, 250 kSPS conversion throughput, one single-ended analog input, a capacitor-based SAR architecture, an inherent sample-and-hold circuit, a precision internal reference, an internal clock, and a 28-pin SOIC package. The manufacturer also describes excellent AC performance. These values establish the core conversion and integration requirements, while exact input range, linearity, noise, power, and temperature limits must be taken from the device datasheet.
Where can I buy ADS7811U online?
Use the Request a Quote form on this page to request ADS7811U pricing, stock confirmation, and lead time. The part is identified by the exact ordering code ADS7811U and the 28-pin SOIC package. Request the current commercial terms directly on this page so the quote reflects the exact MPN, package, quantity, and delivery requirements rather than a family-level or incomplete listing.
What is the price of ADS7811U?
Current ADS7811U pricing should be requested through the Request a Quote form on this page. The quantity, package suffix, and order volume determine the applicable commercial terms, and quotations can change with market conditions. Submit the exact MPN ADS7811U and your required quantities so the response reflects the correct 28-pin SOIC device and delivery plan.
What is the lead time for ADS7811U?
The current lead time for ADS7811U should be confirmed through the Request a Quote form on this page. Lead time depends on order quantity, packaging, and current component availability. Provide the exact MPN ADS7811U, target quantity, and required delivery date so the commercial response can reflect the actual production or procurement situation.

داتای سەرچاوەی ئەندازیاری بۆ ADS7811U — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose ADS7811U when the design needs a documented 16-bit, 250 kSPS, single-channel SAR ADC with a single-ended input, internal reference, internal clock, and 28-pin SOIC package. It is a strong fit for single-variable industrial instrumentation, environmental sensing, and embedded data acquisition. Consider ADS7807U or ADS7809U only after checking their pin assignments, conversion rate, input range, reference arrangement, interface timing, and supply requirements. ADS7811 and the base-family ADS7807 and ADS7809 parts may simplify sourcing within the same TI family, but their exact suffix, grade, and orderable package still matter. For designs needing several simultaneous channels, differential input, higher throughput, or a smaller package, choose a converter with those architectural features rather than forcing the ADS7811U into a mismatched acquisition architecture.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە ADS7807U ADS7809U ADS7811 ADS7807 ADS7809
Package 28-pin SOIC 28-pin SOIC 28-pin SOIC 28-pin SOIC 28-pin SOIC 28-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Converter Architecture Successive-approximation SAR ADC Successive-approximation SAR ADC Successive-approximation SAR ADC Successive-approximation SAR ADC Successive-approximation SAR ADC Successive-approximation SAR ADC
Analog Input Count 1 1 1 1 1 1

جیاکەرەوە سەرەکییەکان

  • Documented 250 kSPS conversion throughput (بەراورد بەADS7807U)
  • Single-ended 16-bit SAR conversion (بەراورد بەADS7809U)
  • Integrated precision reference and internal clock (بەراورد بەADS7807)

تێبینییەکانی دیزاین

Place the analog input signal path close to the ADS7811U and terminate it through the application network recommended by the manufacturer. Keep the input capacitor, protection elements, and any anti-alias filter close to the device so parasitic inductance and capacitance do not degrade acquisition settling. Route digital control and interface signals away from the analog input and reference nodes, and use a continuous ground plane unless the datasheet application layout specifies a split.

Use the supply voltage and decoupling configuration specified in the manufacturer datasheet. Decoupling capacitors should be placed directly beside the associated power and ground pins, with short return paths and controlled loop area. Check the converter’s supply current at the selected conversion rate and confirm that the supply remains within its operating limits during startup, sensor transients, and digital interface activity. Add local bulk energy near the IC if the upstream source is remote.

Account for the SAR input acquisition network rather than treating the analog input as a fixed high-impedance node. The source impedance, external capacitor value, and sampling interval determine how much settling time is available between conversions. Use the manufacturer’s acquisition-time table or application example to select the source impedance, and avoid adding long resistive sensor wiring without a defined filtering and settling strategy.

Do not infer pin compatibility solely from a family name or comparison listing. Verify the complete pin-description table, supply rails, analog input range, digital interface timing, reference behavior, and conversion latency for each proposed ADS7811U alternative. The ADS7807U and ADS7809U comparison pages identify related parts, but a PCB substitution should be approved only after those parameters are checked against the exact manufacturer documents.

The 28-pin SOIC package is intended for conventional PCB mounting, but its copper connectivity and airflow affect thermal performance. Follow the manufacturer’s package and layout guidance, use a ground-plane pattern that supports heat transfer, and avoid placing the converter beside a high-temperature component unless the system enclosure can maintain the required ambient range. Evaluate worst-case sensor dissipation and supply conditions during thermal design rather than relying on nominal room-temperature behavior.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The verified comparison material identifies ADS7807U and ADS7809U as RoHS and REACH compliant, but no corresponding compliance statement for ADS7811U was explicitly provided. The ADS7811U is an industrial ADC, so AEC-Q100 is not applicable.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ADS7811U datasheet ADS7811U datasheet pdf ADS7811U pinout ADS7811U specifications ADS7811U 28-SOIC ADS7811U price ADS7811U stock Texas Instruments ADS7811U ADS7811U equivalent ADS7811U replacement ADS7811U vs ADS7807U ADS7811U application circuit

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments ADS7811U ADS7811 ADS7807U ADS7809U ADS7807 ADS7809 analog-to-digital converter ADC successive-approximation ADC SAR single-ended input sample-and-hold precision internal reference internal clock 16-bit resolution 250 kSPS 28-pin SOIC SOIC package surface mount industrial instrumentation process control environmental monitoring sensor measurement data acquisition RoHS REACH AEC-Q100
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ