AK4118AEQ - 192kHz 24-Bit 8-Channel Audio Transceiver | AKM
MPN: AK4118AEQ ✓ چالاکAK4118AEQ گشتی
A digital audio transceiver is an interface IC that converts between digital audio streams and their electrical interface requirements while recovering clock, data, and channel-status information. In the audio-signal hierarchy, the AK4118AEQ sits between source or codec circuitry and a digital audio bus, where it supports receiver, transmitter, or bidirectional digital audio paths. Its eight GPIO pins provide additional control or general-purpose interface functions.
Key features include operation up to 192kHz with 24-bit word length, support for consumer and professional channel-status decoding, automatic non-PCM detection, and dedicated-pin or serial microprocessor control of operating modes. The device can operate as a two-transmitter, seven-receiver audio interface, allowing one device to bridge several digital audio connections. Its 48-LQFP package provides 48 external leads for the parallel, serial, clock, data, status, and control functions.
The AK4118A architecture separates transmit and receive channel handling while adding register-based configuration, GPIO, and channel-status support. Automatic non-PCM detection is especially useful when equipment must identify compressed or non-linear PCM streams reliably. Together with the AK4626A or AK4628A multichannel codec, the AK4118A can form an AC-3-capable signal chain, as identified in the manufacturer datasheet.
Typical applications include professional digital audio equipment, multichannel recording systems, broadcast and studio converters, consumer surround systems, optical-disc receivers, and interface boards that require bidirectional digital audio connectivity. The seven receiver channels are particularly useful for accepting multiple digital sources, while the two transmitter channels support routing decoded or received audio onward to another processor.
PCB design should preserve short, impedance-controlled connections for digital audio signals and place support components close to their associated pins. Follow the manufacturer pin-description table when assigning tracks, especially for clock, data, mode-control, and serial-control signals. Confirm interface levels, supported electrical standards, and input/output routing in the datasheet before finalizing a multi-channel audio board.
This product page combines the manufacturer's key interface capabilities, a function-focused comparison with known digital-audio alternatives, and practical implementation guidance. It helps engineers identify whether the AK4118AEQ is the appropriate eight-channel transceiver, how it fits around AK4626A and AK4628A codecs, and which functional alternatives require different pin assignments or modified circuit boards.
جێگرەوەکانی جێگۆڕکێ بۆ AK4118AEQ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەAK4118AEQ تایبەتمەندییەکان
| Product Type | Digital audio interface transceiver |
| Maximum Sampling Frequency | 192 kHz |
| Maximum Audio Word Length | 24 bit |
| Total Audio Channels | 8 channels |
| Transmitter Channels | 2 channels |
| Receiver Channels | 7 channels |
| پاکێج | 48-LQFP, 7x7 mm |
| Total Leads | 48 leads |
| جۆری دامەزراندن | Surface mount |
| Temperature Grade | Commercial |
| Channel Status Modes | Consumer and professional modes |
| Non-PCM Detection | Automatic |
| GPIO Port Pins | 8 pins |
| Control Interface | Dedicated pins or serial microprocessor interface |
| AC-3 System Support | Supported when paired with AK4626A or AK4628A codec |
ڕێنمایی ڕێکخستنی پینی AK4118AEQ 48-lqfp, 7x7 mm
ڕێکخستنی پین بۆ AK4118AEQ (پاکێجی 48-lqfp, 7x7 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ AK4118AEQ.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
AK4118AEQ گونجاوە بۆ 6 بەکارھێنانs: Professional Digital Audio Interface, Multichannel Recording System, Broadcast and Studio Audio Converter, Home Theater Surround Audio Receiver, Optical Disc Audio Receiver, AC-3 Audio System Interface.
Professional Digital Audio Interface
The AK4118AEQ fits professional digital-audio interfaces that must accept several incoming streams and route audio onward. Its seven receiver inputs and two transmitter outputs provide flexible channel organization in one 48-LQFP device, while operation up to 192kHz and 24 bits supports high-resolution studio and broadcast workflows. Consumer and professional channel-status decoding allows the interface to handle different source conventions. Automatic non-PCM detection improves recognition of non-linear PCM content. In implementation, clock and data nets should be routed according to the manufacturer pin table, and the serial-control interface can be used when the design requires software-configurable modes rather than dedicated pin control.
پێشنیارکراو
Multichannel Recording System
The AK4118AEQ is useful in multichannel recording equipment where several digital sources must be accepted, monitored, or distributed. Seven receiver channels provide more input flexibility than a receiver-only interface, while two transmitters can forward selected digital audio to another processing stage. Support for 192kHz sampling and 24-bit words accommodates high-rate recording and monitoring formats. The device also offers eight GPIO pins for auxiliary control functions and dedicated or serial mode selection for integration with system control logic. A practical design should isolate interface routing from switching regulators and clocks to preserve data integrity.
پێشنیارکراو
Broadcast and Studio Audio Converter
The AK4118AEQ supports broadcast and studio converter designs that need flexible digital-audio routing and status interpretation. Professional channel-status decoding is directly relevant to equipment operating with professional digital-audio metadata, while consumer-mode support broadens source compatibility. At 192kHz and 24-bit resolution, the transceiver accommodates high-quality studio signals without requiring separate transmitter and receiver ICs. Eight GPIO pins can assist with channel enable, routing, or status functions. The 48-LQFP 7x7 mm package is practical for compact converter boards, but clock distribution, grounding, and connector isolation remain central to reliable signal transmission.
پێشنیارکراو
Home Theater Surround Audio Receiver
The AK4118AEQ can serve in a home-theater receiver or surround-audio interface where multiple digital sources feed an audio processor. Seven receiver inputs simplify source selection and reduce the number of separate receiver-only devices, while two transmitters support onward digital routing. Automatic non-PCM detection helps the system identify compressed or non-linear PCM streams, and consumer channel-status decoding is appropriate for many consumer-source connections. Operation up to 192kHz and 24-bit resolution supports modern high-resolution formats. Firmware and mode settings should be coordinated with the selected decoder, and digital interfaces should be kept away from amplifier switching stages.
پێشنیارکراو
Optical Disc Audio Receiver
The AK4118AEQ is appropriate for digital audio receivers that extract audio from optical-disc or broadcast sources and present it to a codec or decoder. The seven receiver inputs allow multiple digital paths or redundant source connections, and automatic non-PCM detection can identify streams that are not conventional linear PCM. Support for consumer and professional channel-status formats makes the interface adaptable across source types. Its two transmitters provide additional routing options for monitoring or downstream processing. The 48-LQFP package requires careful high-speed layout, including short clock and data paths and a stable ground reference, so that receiver sensitivity is not degraded by nearby digital and power circuitry.
پێشنیارکراو
AC-3 Audio System Interface
The AK4118AEQ is specifically identified in the manufacturer datasheet as part of an AC-3-capable system when paired with the AK4626A or AK4628A multichannel codec. In that architecture, the AK4118AEQ handles digital-audio reception and transmission, channel-status interpretation, and non-PCM stream detection, while the codec performs the required multichannel audio functions. The interface supports 192kHz and 24-bit operation, providing sufficient headroom for high-resolution audio formats. The two transmitter and seven receiver channels also support broader routing than a unidirectional receiver. Firmware should configure mode selection and detect non-PCM streams consistently with the codec and downstream decoder.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ AK4118AEQ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Package | 48-LQFP, 7x7 mm |
| Brand | Asahi Kasei Microdevices |
| Product Type | Digital audio interface transceiver |
| Maximum Sampling Frequency | 192 kHz |
| Maximum Audio Word Length | 24 bit |
| Transmitter Channels | 2 channels |
| Receiver Channels | 7 channels |
| Channel Status | Consumer and professional modes |
| Non-PCM Detection | Automatic |
| GPIO | 8 pins |
جیاکەرەوە سەرەکییەکان
- Bidirectional eight-channel interface in one device (بەراورد بەCS8416)
- Supports both consumer and professional channel-status decoding (بەراورد بەCS8406)
- Broad channel flexibility for multichannel audio systems (بەراورد بەWM8805)
تێبینییەکانی دیزاین
Assign all 48 package positions from the manufacturer pin-description table and package drawing rather than inferring functions from receiver or transmitter block diagrams. Keep digital-audio clock and data routes short, provide continuous return paths, and route them away from switching nodes and high-current amplifier outputs. Verify exposed-pad and ground connections against the recommended land pattern before fabrication.
Treat clock lines as the primary timing reference and route them ahead of data nets where practical. Maintain consistent return-path continuity beneath high-speed interfaces and avoid stubs or unnecessary test-point structures. Because the device supports 192kHz digital audio, use the datasheet interface timing, voltage levels, and application guidance as the basis for trace geometry and termination decisions.
Do not treat CS8416, CS8406, or WM8805 as direct substitutions for the AK4118AEQ. The first two implement only one interface direction, while WM8805 has a different pin assignment. Choose those devices only for a redesigned PCB with corresponding control firmware. For an existing AK4118AEQ layout, retain the original device and use its dedicated or serial mode-control scheme as specified.
Place power-decoupling capacitors close to the appropriate supply and ground pins using the values and layout shown in the manufacturer datasheet. Separate sensitive audio-interface returns from noisy converter and amplifier-current paths where the board architecture permits. Stable reference voltage and low-noise supply connections are important because interface timing, clock recovery, and channel-status detection must remain predictable at the supported 192kHz rate.
زانیاری پابەندبوون
The product is a commercial-grade digital audio interface IC. Compliance attributes not stated in the manufacturer product page or datasheet are recorded as unknown rather than inferred.