AKM (Asahi Kasei Microdevices)

AK4118AEQ - 192kHz 24-Bit 8-Channel Audio Transceiver | AKM

Артикул: AK4118AEQ ✓ Активен
48-LQFP, 7x7 mm Package 192 kHz Speed
MOQ: 1 |

AK4118AEQ Обзор

The Asahi Kasei Microdevices AK4118AEQ is a digital audio interface transceiver supporting 192kHz, 24-bit audio across eight channels, with two transmitter outputs and seven receiver inputs, in a 48-LQFP 7x7 mm package. It handles both consumer and professional channel-status formats and can automatically identify a non-PCM bitstream.

A digital audio transceiver is an interface IC that converts between digital audio streams and their electrical interface requirements while recovering clock, data, and channel-status information. In the audio-signal hierarchy, the AK4118AEQ sits between source or codec circuitry and a digital audio bus, where it supports receiver, transmitter, or bidirectional digital audio paths. Its eight GPIO pins provide additional control or general-purpose interface functions.

Key features include operation up to 192kHz with 24-bit word length, support for consumer and professional channel-status decoding, automatic non-PCM detection, and dedicated-pin or serial microprocessor control of operating modes. The device can operate as a two-transmitter, seven-receiver audio interface, allowing one device to bridge several digital audio connections. Its 48-LQFP package provides 48 external leads for the parallel, serial, clock, data, status, and control functions.

The AK4118A architecture separates transmit and receive channel handling while adding register-based configuration, GPIO, and channel-status support. Automatic non-PCM detection is especially useful when equipment must identify compressed or non-linear PCM streams reliably. Together with the AK4626A or AK4628A multichannel codec, the AK4118A can form an AC-3-capable signal chain, as identified in the manufacturer datasheet.

Typical applications include professional digital audio equipment, multichannel recording systems, broadcast and studio converters, consumer surround systems, optical-disc receivers, and interface boards that require bidirectional digital audio connectivity. The seven receiver channels are particularly useful for accepting multiple digital sources, while the two transmitter channels support routing decoded or received audio onward to another processor.

PCB design should preserve short, impedance-controlled connections for digital audio signals and place support components close to their associated pins. Follow the manufacturer pin-description table when assigning tracks, especially for clock, data, mode-control, and serial-control signals. Confirm interface levels, supported electrical standards, and input/output routing in the datasheet before finalizing a multi-channel audio board.

This product page combines the manufacturer's key interface capabilities, a function-focused comparison with known digital-audio alternatives, and practical implementation guidance. It helps engineers identify whether the AK4118AEQ is the appropriate eight-channel transceiver, how it fits around AK4626A and AK4628A codecs, and which functional alternatives require different pin assignments or modified circuit boards.

Аналоги без доработки для AK4118AEQ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Для этого товара нет аналогов без доработки.

Запросить аналоги

AK4118AEQ Характеристики

Product Type Digital audio interface transceiver
Maximum Sampling Frequency 192 kHz
Maximum Audio Word Length 24 bit
Total Audio Channels 8 channels
Transmitter Channels 2 channels
Receiver Channels 7 channels
Корпус 48-LQFP, 7x7 mm
Total Leads 48 leads
Тип монтажа Surface mount
Temperature Grade Commercial
Channel Status Modes Consumer and professional modes
Non-PCM Detection Automatic
GPIO Port Pins 8 pins
Control Interface Dedicated pins or serial microprocessor interface
AC-3 System Support Supported when paired with AK4626A or AK4628A codec

Руководство по цоколевке AK4118AEQ в корпусе 48-lqfp, 7x7 mm

Цоколевка для AK4118AEQ (корпус 48-lqfp, 7x7 mm). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 48-lqfp, 7x7 mm для AK4118AEQ

Нет подробных данных о распиновке для AK4118AEQ.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

AK4118AEQ подходит для 6 применениеs: Professional Digital Audio Interface, Multichannel Recording System, Broadcast and Studio Audio Converter, Home Theater Surround Audio Receiver, Optical Disc Audio Receiver, AC-3 Audio System Interface.

🎧

Professional Digital Audio Interface

The AK4118AEQ fits professional digital-audio interfaces that must accept several incoming streams and route audio onward. Its seven receiver inputs and two transmitter outputs provide flexible channel organization in one 48-LQFP device, while operation up to 192kHz and 24 bits supports high-resolution studio and broadcast workflows. Consumer and professional channel-status decoding allows the interface to handle different source conventions. Automatic non-PCM detection improves recognition of non-linear PCM content. In implementation, clock and data nets should be routed according to the manufacturer pin table, and the serial-control interface can be used when the design requires software-configurable modes rather than dedicated pin control.

🎙️

Multichannel Recording System

The AK4118AEQ is useful in multichannel recording equipment where several digital sources must be accepted, monitored, or distributed. Seven receiver channels provide more input flexibility than a receiver-only interface, while two transmitters can forward selected digital audio to another processing stage. Support for 192kHz sampling and 24-bit words accommodates high-rate recording and monitoring formats. The device also offers eight GPIO pins for auxiliary control functions and dedicated or serial mode selection for integration with system control logic. A practical design should isolate interface routing from switching regulators and clocks to preserve data integrity.

📺

Broadcast and Studio Audio Converter

The AK4118AEQ supports broadcast and studio converter designs that need flexible digital-audio routing and status interpretation. Professional channel-status decoding is directly relevant to equipment operating with professional digital-audio metadata, while consumer-mode support broadens source compatibility. At 192kHz and 24-bit resolution, the transceiver accommodates high-quality studio signals without requiring separate transmitter and receiver ICs. Eight GPIO pins can assist with channel enable, routing, or status functions. The 48-LQFP 7x7 mm package is practical for compact converter boards, but clock distribution, grounding, and connector isolation remain central to reliable signal transmission.

🏠

Home Theater Surround Audio Receiver

The AK4118AEQ can serve in a home-theater receiver or surround-audio interface where multiple digital sources feed an audio processor. Seven receiver inputs simplify source selection and reduce the number of separate receiver-only devices, while two transmitters support onward digital routing. Automatic non-PCM detection helps the system identify compressed or non-linear PCM streams, and consumer channel-status decoding is appropriate for many consumer-source connections. Operation up to 192kHz and 24-bit resolution supports modern high-resolution formats. Firmware and mode settings should be coordinated with the selected decoder, and digital interfaces should be kept away from amplifier switching stages.

📀

Optical Disc Audio Receiver

The AK4118AEQ is appropriate for digital audio receivers that extract audio from optical-disc or broadcast sources and present it to a codec or decoder. The seven receiver inputs allow multiple digital paths or redundant source connections, and automatic non-PCM detection can identify streams that are not conventional linear PCM. Support for consumer and professional channel-status formats makes the interface adaptable across source types. Its two transmitters provide additional routing options for monitoring or downstream processing. The 48-LQFP package requires careful high-speed layout, including short clock and data paths and a stable ground reference, so that receiver sensitivity is not degraded by nearby digital and power circuitry.

🔊

AC-3 Audio System Interface

The AK4118AEQ is specifically identified in the manufacturer datasheet as part of an AC-3-capable system when paired with the AK4626A or AK4628A multichannel codec. In that architecture, the AK4118AEQ handles digital-audio reception and transmission, channel-status interpretation, and non-PCM stream detection, while the codec performs the required multichannel audio functions. The interface supports 192kHz and 24-bit operation, providing sufficient headroom for high-resolution audio formats. The two transmitter and seven receiver channels also support broader routing than a unidirectional receiver. Firmware should configure mode selection and detect non-PCM streams consistently with the codec and downstream decoder.

Сводка рекомендуемых товаров

AK4626A Multichannel codec for an AC-3-capable digital audio system Используется в: Professional Digital Audio Interface, Multichannel Recording System, Broadcast and Studio Audio Converter, Home Theater Surround Audio Receiver, Optical Disc Audio Receiver, AC-3 Audio System Interface AK4628A Multichannel codec companion for digital audio conversion Используется в: Professional Digital Audio Interface, Broadcast and Studio Audio Converter, AC-3 Audio System Interface CS8416 Functional receiver-only reference requiring footprint review Используется в: Multichannel Recording System, Optical Disc Audio Receiver WM8805 Functional bidirectional digital audio interface reference Используется в: Home Theater Surround Audio Receiver
What is the AK4118AEQ?
The AK4118AEQ is an eight-channel digital audio interface transceiver from Asahi Kasei Microdevices, supporting sampling rates up to 192kHz and audio data up to 24 bits per word. According to the manufacturer datasheet, it provides two transmitter channels, seven receiver channels, consumer and professional channel-status decoding, and automatic non-PCM detection in a 48-LQFP package.
What are the key specifications of AK4118AEQ that engineers should know?
The AK4118AEQ supports up to 192kHz sampling, 24-bit digital audio, two transmit channels, seven receive channels, and eight GPIO pins. The manufacturer datasheet also identifies consumer and professional channel-status modes, automatic non-PCM detection, and dedicated-pin or serial microprocessor control. The device is packaged in a 48-LQFP measuring 7x7 mm, making it suitable for compact multichannel audio-interface boards.
How many digital audio channels does the AK4118AEQ support?
The AK4118AEQ supports eight digital audio channels, divided into two transmitter outputs and seven receiver inputs. This 2TX/7RX organization allows multiple incoming streams to be received while two channels are transmitted onward. The manufacturer datasheet identifies the device as an eight-channel digital audio transceiver operating at up to 192kHz and 24-bit resolution.
Where can I download the AK4118AEQ datasheet PDF?
The AK4118AEQ datasheet PDF can be downloaded from the manufacturer product page or from the linked AK4118A datasheet PDF. The document covers the 192kHz, 24-bit digital audio interface, channel-status handling, GPIO functions, mode settings, and the 48-LQFP pin descriptions. Use the manufacturer’s pin table when assigning PCB nets to clock, data, status, and control signals.
Where is the AK4118AEQ pinout located?
The AK4118AEQ pinout is located in the pin-description section and package drawing of the manufacturer datasheet. The device uses a 48-LQFP 7x7 mm package, so the complete pin assignment includes 48 numbered positions. Verify pin numbering, exposed-pad treatment, ground connections, and interface signal names against the package drawing before laying out the PCB.
Does the AK4118AEQ support both consumer and professional digital audio?
Yes. The AK4118AEQ channel-status decoder supports both consumer and professional modes, allowing the same interface device to work with different digital-audio conventions. According to the manufacturer datasheet, operating modes can be selected through dedicated pins or the serial microprocessor interface. Configuration should therefore be matched to the format used by the connected source and codec.
Can the AK4118AEQ detect non-PCM audio streams?
Yes, the AK4118AEQ can automatically detect a non-PCM bitstream. This feature helps equipment distinguish non-linear PCM content without requiring the host software to infer the stream type from every sample. The manufacturer datasheet identifies automatic non-PCM detection as a core feature of the 192kHz, 24-bit AK4118A digital audio transceiver.
Can AK4626A or AK4628A be used with the AK4118AEQ?
Yes. The manufacturer datasheet states that AK4118A combined with the AK4626A or AK4628A multichannel codec provides a system solution for AC-3 applications. The AK4118AEQ manages digital audio interface reception, transmission, channel status, and stream detection, while the companion codec performs the multichannel audio conversion functions required by the system.
AK4118AEQ vs PCM9211PT: which is better for multichannel audio?
The AK4118AEQ is preferable when a design needs a dedicated eight-channel transceiver with two transmitters, seven receivers, 192kHz operation, and 24-bit resolution. PCM9211PT is a functional audio-interface comparison candidate, but the cross-reference material does not establish that it is pin-compatible with the AK4118AEQ. Treat it as a design-level alternative and verify footprint, interface signals, and control firmware before selecting it.
What is the difference between AK4118AEQ and the CS8416?
The AK4118AEQ is a full digital audio transceiver with two transmit channels and seven receive channels, while the CS8416 is identified as a receiver-only functional alternative. The AK4118AEQ therefore offers broader interface direction flexibility and GPIO control. The CS8416 is not established as pin-to-pin compatible, so it should be considered only when the PCB and firmware can accommodate its receiver-only architecture.
When should I choose the AK4118AEQ over a receiver-only interface IC?
Choose the AK4118AEQ when the design must both receive several digital audio streams and transmit two channels, particularly for 192kHz, 24-bit professional or consumer interfaces. A receiver-only device may be sufficient when only incoming audio is needed and no transmitter, GPIO, or bidirectional routing functions are required. The final decision should also account for pin compatibility and digital interface standards.
Is the AK4118AEQ suitable for professional recording and broadcast equipment?
The AK4118AEQ is suitable for professional multichannel audio interfaces because it supports up to 192kHz, 24-bit operation, seven receiver inputs, two transmitter outputs, and professional channel-status decoding. The eight GPIO pins and configurable mode controls add implementation flexibility. Professional designs should also follow the datasheet for clocking, grounding, signal routing, and supported electrical interfaces.
What can replace the AK4118AEQ?
No pin-to-pin replacement is established by the available cross-reference information for the AK4118AEQ. CS8416 and CS8406 are receiver-only and transmitter-only functional alternatives, while WM8805 is bidirectional but uses a different pin assignment. Consequently, replacement normally requires PCB and firmware changes rather than a simple component substitution. The AK4118AEQ should remain the baseline when its original footprint and control scheme are required.
Is there a pin-compatible cross-brand equivalent for the AK4118AEQ?
No pin-compatible cross-brand equivalent is established for the AK4118AEQ. Known functional alternatives include receiver-only CS8416, transmitter-only CS8406, and bidirectional WM8805, whose pin assignment differs. These devices may be useful in a redesigned interface but are not drop-in replacements. Use the Request a Quote form on this page when sourcing the exact AK4118AEQ for an existing design.
Where can I buy the AK4118AEQ and what is its current lead time?
The AK4118AEQ can be requested through the Request a Quote form on this page. The form is the appropriate route for current unit availability, production lead time, and minimum order quantity because distribution conditions can change independently of the product specification. For engineering reference, the manufacturer lists the device as a 192kHz, 24-bit, eight-channel transceiver in a 48-LQFP package.
How should the AK4118AEQ be placed in a digital audio PCB design?
Place the AK4118AEQ so clock, data, status, and serial-control traces are short and routed away from noisy switching nodes. Follow the manufacturer pin-description table and package drawing for the 48-LQFP footprint, power connections, and grounding. The 7x7 mm package allows placement flexibility, but signal integrity depends on controlled topology, return paths, and careful treatment of interface and clock nets.

Справочные инженерные данные для AK4118AEQ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the AK4118AEQ for a multichannel digital-audio design that needs two transmit channels, seven receive channels, operation up to 192kHz and 24-bit resolution, professional or consumer channel-status handling, and automatic non-PCM detection. It is particularly appropriate around AK4626A or AK4628A codecs and in systems requiring GPIO-assisted control. A receiver-only device such as CS8416 may be adequate when only incoming audio is needed, but it cannot reproduce the AK4118AEQ transmit functions. CS8406 may suit transmitter-only designs but lacks the complete bidirectional arrangement. WM8805 offers a bidirectional functional comparison, yet its different pin assignment makes it unsuitable as a drop-in replacement. No cross-brand pin-compatible equivalent is established, so an existing AK4118AEQ layout should retain the original device. For a fresh design, choose the closest functional architecture only after verifying package, signal assignment, timing, voltage levels, and firmware.

Сравнение с аналогами

Параметр Этот товар
Package 48-LQFP, 7x7 mm
Brand Asahi Kasei Microdevices
Product Type Digital audio interface transceiver
Maximum Sampling Frequency 192 kHz
Maximum Audio Word Length 24 bit
Transmitter Channels 2 channels
Receiver Channels 7 channels
Channel Status Consumer and professional modes
Non-PCM Detection Automatic
GPIO 8 pins

Ключевые отличия

  • Bidirectional eight-channel interface in one device (против CS8416)
  • Supports both consumer and professional channel-status decoding (против CS8406)
  • Broad channel flexibility for multichannel audio systems (против WM8805)

Заметки по проектированию

Assign all 48 package positions from the manufacturer pin-description table and package drawing rather than inferring functions from receiver or transmitter block diagrams. Keep digital-audio clock and data routes short, provide continuous return paths, and route them away from switching nodes and high-current amplifier outputs. Verify exposed-pad and ground connections against the recommended land pattern before fabrication.

Treat clock lines as the primary timing reference and route them ahead of data nets where practical. Maintain consistent return-path continuity beneath high-speed interfaces and avoid stubs or unnecessary test-point structures. Because the device supports 192kHz digital audio, use the datasheet interface timing, voltage levels, and application guidance as the basis for trace geometry and termination decisions.

Do not treat CS8416, CS8406, or WM8805 as direct substitutions for the AK4118AEQ. The first two implement only one interface direction, while WM8805 has a different pin assignment. Choose those devices only for a redesigned PCB with corresponding control firmware. For an existing AK4118AEQ layout, retain the original device and use its dedicated or serial mode-control scheme as specified.

Place power-decoupling capacitors close to the appropriate supply and ground pins using the values and layout shown in the manufacturer datasheet. Separate sensitive audio-interface returns from noisy converter and amplifier-current paths where the board architecture permits. Stable reference voltage and low-noise supply connections are important because interface timing, clock recovery, and channel-status detection must remain predictable at the supported 192kHz rate.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The product is a commercial-grade digital audio interface IC. Compliance attributes not stated in the manufacturer product page or datasheet are recorded as unknown rather than inferred.

Данные проверены: 2026-11-16 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ak4118aeq datasheet akm ak4118aeq AK4118AEQ datasheet pdf AK4118AEQ pinout AK4118AEQ 192kHz 24-bit AK4118AEQ 8-channel transceiver AK4118AEQ 48-LQFP AK4118AEQ equivalent AK4118AEQ replacement AK4118AEQ vs PCM9211PT AK4118AEQ professional audio interface AK4118AEX application circuit AK4118AEQ price AK4118AEX stock AK4118AEQ channel status decoder

Связанные компоненты & термины

Asahi Kasei Microdevices AKM AK4118AEQ AK4118A AK4626A AK4628A CS8416 CS8406 WM8805 PCM9211PT digital audio transceiver digital audio interface audio codec consumer channel status professional channel status non-PCM detection GPIO serial microprocessor interface 48-LQFP LQFP family surface mount 192kHz sampling 24-bit audio AC-3 audio digital audio bus
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ