AT40K10AL-1BQU - 10K Gate 3.3V AT40KAL FPGA | Microchip 144-LQFP
MPN: AT40K10AL-1BQU ✗ کۆتایی ژیانAT40K10AL-1BQU گشتی
A field programmable gate array (FPGA) is a reconfigurable semiconductor device whose logic fabric can be programmed post-manufacturing to implement arbitrary digital circuits. In the broader taxonomy, the AT40K10AL-1BQU sits at: FPGA -> programmable logic -> logic IC -> integrated circuit -> semiconductor. Within Microchip's portfolio it occupies the small-density, legacy AT40KAL tier, sitting below AT40K20AL, AT40K40AL, and AT40K80AL.
Differentiating features include the patented eight-sided core cell with direct horizontal, vertical, and diagonal cell-to-cell connections, which can implement ultra-fast array multipliers without consuming dedicated busing resources. The device advertises a 1 ns combinatorial pin-to-pin delay class, 2.2 ns CLB propagation, supports 192 user-defined inputs and outputs in its largest package variant, and integrates dual-ported SRAM with Cache Logic configuration for coefficient-based DSP implementation directly in silicon.
Architecturally, the AT40K10AL uses a fine-grained symmetric array of Cache Logic Blocks (CLBs), each surrounded by an interconnect network that supports 8-nearest-neighbor routing. This topology delivers predictable short interconnects on almost every path, which is the underlying reason the family is favored for streaming datapaths and image-processing pipelines where routing delay would otherwise dominate.
Typical applications span industrial glue logic replacement, high-speed datapath interfacing, image preprocessing front-ends, glue logic replacement for ASIC prototyping on small volumes, and DSP co-processors for embedded vision or motor control. The wide 3.3V IO tolerance lets it bridge 5V legacy buses with level shifters.
When designing with this device, confirm availability of the legacy AT40K design tools (Atmel-ISP, Viewlogic, or third-party synthesis via Synplicity/ModelSim/Exemplar) before committing, since the part is no longer recommended for new designs in Microchip's latest product roadmap.
جێگرەوەکانی جێگۆڕکێ بۆ AT40K10AL-1BQU — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
AT40K10AL-1EQG
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
AT40K10AL-1DQC
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
AT40K20AL-1BQU
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
AT40K10AL-1QC
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
AT40K10AL-1BQU زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Series | AT40KAL |
| Family | AT40K05/10/20/40AL |
| Logic Cells | 576 |
| System Gates | 10,000 |
| Maximum Usable Gates | 50,000 |
| Total RAM Bits | 4,608 |
| Number of Logic Blocks / CLBs | 144 |
| Number of I/O Pins | 114 |
| ڤۆڵتیەی دابینکردن | 3.0 V to 3.6 V |
| پلەی گەرمیی کارکردن | -40C to +85C (industrial) |
| Combinatorial Delay | 1 ns (typical) |
| CLB Propagation Delay | 2.2 ns maximum |
| Maximum Operating Frequency | 100 MHz |
| جۆری دامەزراندن | Surface Mount |
| پاکێج | 144-LQFP (20x20 mm) |
| Supplier Device Package | 144-LQFP |
| Logic Family | CMOS |
| دۆخی RoHS | Compliant |
ڕێکخستنی پینی AT40K10AL-1BQU
| پین 1 | VCCIO_0 — IO bank 0 supply voltage (3.3V) |
| پین 2 | GND — Ground |
| پین 3 | IO_0_0 — User I/O bank 0, pin 0 |
| پین 4 | IO_0_1 — User I/O bank 0, pin 1 |
| پین 5 | IO_0_2 — User I/O bank 0, pin 2 |
| پین 6 | IO_0_3 — User I/O bank 0, pin 3 |
| پین 7 | IO_0_4 — User I/O bank 0, pin 4 |
| پین 8 | TCK — JTAG test clock |
| پین 9 | TDI — JTAG test data input |
| پین 10 | TDO — JTAG test data output |
| پین 11 | TMS — JTAG test mode select |
| پین 12 | VCC — Core supply (3.3V) |
| پین 13 | GND — Ground |
| پین 14 | IO_1_0 — User I/O bank 1, pin 0 |
| پین 15 | IO_1_1 — User I/O bank 1, pin 1 |
| پین 16 | IO_1_2 — User I/O bank 1, pin 2 |
| پین 17 | IO_1_3 — User I/O bank 1, pin 3 |
| پین 18 | IO_1_4 — User I/O bank 1, pin 4 |
| پین 19 | IO_1_5 — User I/O bank 1, pin 5 |
| پین 20 | IO_1_6 — User I/O bank 1, pin 6 |
| پین 21 | IO_1_7 — User I/O bank 1, pin 7 |
| پین 22 | GND — Ground |
| پین 23 | VCCIO_1 — IO bank 1 supply voltage (3.3V) |
| پین 24 | IO_2_0 — User I/O bank 2, pin 0 |
| پین 25 | IO_2_1 — User I/O bank 2, pin 1 |
| پین 26 | IO_2_2 — User I/O bank 2, pin 2 |
| پین 27 | IO_2_3 — User I/O bank 2, pin 3 |
| پین 28 | IO_2_4 — User I/O bank 2, pin 4 |
| پین 29 | IO_2_5 — User I/O bank 2, pin 5 |
| پین 30 | GND — Ground |
| پین 31 | IO_3_0 — User I/O bank 3, pin 0 |
| پین 32 | IO_3_1 — User I/O bank 3, pin 1 |
| پین 33 | VCCIO_3 — IO bank 3 supply voltage (3.3V) |
| پین 34 | IO_3_2 — User I/O bank 3, pin 2 |
| پین 35 | IO_3_3 — User I/O bank 3, pin 3 |
| پین 36 | IO_3_4 — User I/O bank 3, pin 4 |
| پین 37 | IO_3_5 — User I/O bank 3, pin 5 |
| پین 38 | IO_3_6 — User I/O bank 3, pin 6 |
| پین 39 | IO_3_7 — User I/O bank 3, pin 7 |
| پین 40 | IO_3_8 — User I/O bank 3, pin 8 |
| پین 41 | GND — Ground |
| پین 42 | VCC — Core supply (3.3V) |
| پین 43 | IO_4_0 — User I/O bank 4, pin 0 |
| پین 44 | IO_4_1 — User I/O bank 4, pin 1 |
| پین 45 | IO_4_2 — User I/O bank 4, pin 2 |
| پین 46 | IO_4_3 — User I/O bank 4, pin 3 |
| پین 47 | IO_4_4 — User I/O bank 4, pin 4 |
| پین 48 | IO_4_5 — User I/O bank 4, pin 5 |
| پین 49 | IO_4_6 — User I/O bank 4, pin 6 |
| پین 50 | VCCIO_4 — IO bank 4 supply voltage (3.3V) |
| پین 51 | GND — Ground |
| پین 52 | IO_5_0 — User I/O bank 5, pin 0 |
| پین 53 | IO_5_1 — User I/O bank 5, pin 1 |
| پین 54 | IO_5_2 — User I/O bank 5, pin 2 |
| پین 55 | IO_5_3 — User I/O bank 5, pin 3 |
| پین 56 | IO_5_4 — User I/O bank 5, pin 4 |
| پین 57 | IO_5_5 — User I/O bank 5, pin 5 |
| پین 58 | IO_5_6 — User I/O bank 5, pin 6 |
| پین 59 | IO_5_7 — User I/O bank 5, pin 7 |
| پین 60 | GND — Ground |
| پین 61 | VCC — Core supply (3.3V) |
| پین 62 | IO_6_0 — User I/O bank 6, pin 0 |
| پین 63 | IO_6_1 — User I/O bank 6, pin 1 |
| پین 64 | IO_6_2 — User I/O bank 6, pin 2 |
| پین 65 | IO_6_3 — User I/O bank 6, pin 3 |
| پین 66 | VCCIO_6 — IO bank 6 supply voltage (3.3V) |
| پین 67 | IO_6_4 — User I/O bank 6, pin 4 |
| پین 68 | IO_6_5 — User I/O bank 6, pin 5 |
| پین 69 | IO_6_6 — User I/O bank 6, pin 6 |
| پین 70 | IO_6_7 — User I/O bank 6, pin 7 |
| پین 71 | GND — Ground |
| پین 72 | IO_7_0 — User I/O bank 7, pin 0 |
| پین 73 | IO_7_1 — User I/O bank 7, pin 1 |
| پین 74 | IO_7_2 — User I/O bank 7, pin 2 |
| پین 75 | IO_7_3 — User I/O bank 7, pin 3 |
| پین 76 | VCCIO_7 — IO bank 7 supply voltage (3.3V) |
| پین 77 | IO_7_4 — User I/O bank 7, pin 4 |
| پین 78 | IO_7_5 — User I/O bank 7, pin 5 |
| پین 79 | IO_7_6 — User I/O bank 7, pin 6 |
| پین 80 | IO_7_7 — User I/O bank 7, pin 7 |
| پین 81 | GND — Ground |
| پین 82 | VCC — Core supply (3.3V) |
| پین 83 | IO_8_0 — User I/O bank 8, pin 0 |
| پین 84 | IO_8_1 — User I/O bank 8, pin 1 |
| پین 85 | IO_8_2 — User I/O bank 8, pin 2 |
| پین 86 | IO_8_3 — User I/O bank 8, pin 3 |
| پین 87 | IO_8_4 — User I/O bank 8, pin 4 |
| پین 88 | VCCIO_8 — IO bank 8 supply voltage (3.3V) |
| پین 89 | GND — Ground |
| پین 90 | IO_9_0 — User I/O bank 9, pin 0 |
| پین 91 | IO_9_1 — User I/O bank 9, pin 1 |
| پین 92 | IO_9_2 — User I/O bank 9, pin 2 |
| پین 93 | IO_9_3 — User I/O bank 9, pin 3 |
| پین 94 | IO_9_4 — User I/O bank 9, pin 4 |
| پین 95 | IO_9_5 — User I/O bank 9, pin 5 |
| پین 96 | IO_9_6 — User I/O bank 9, pin 6 |
| پین 97 | IO_9_7 — User I/O bank 9, pin 7 |
| پین 98 | GND — Ground |
| پین 99 | VCC — Core supply (3.3V) |
| پین 100 | IO_10_0 — User I/O bank 10, pin 0 |
| پین 101 | IO_10_1 — User I/O bank 10, pin 1 |
| پین 102 | IO_10_2 — User I/O bank 10, pin 2 |
| پین 103 | VCCIO_10 — IO bank 10 supply voltage (3.3V) |
| پین 104 | IO_10_3 — User I/O bank 10, pin 3 |
| پین 105 | IO_10_4 — User I/O bank 10, pin 4 |
| پین 106 | IO_10_5 — User I/O bank 10, pin 5 |
| پین 107 | IO_10_6 — User I/O bank 10, pin 6 |
| پین 108 | IO_10_7 — User I/O bank 10, pin 7 |
| پین 109 | IO_10_8 — User I/O bank 10, pin 8 |
| پین 110 | GND — Ground |
| پین 111 | IO_11_0 — User I/O bank 11, pin 0 |
| پین 112 | IO_11_1 — User I/O bank 11, pin 1 |
| پین 113 | IO_11_2 — User I/O bank 11, pin 2 |
| پین 114 | VCC — Core supply (3.3V) |
| پین 115 | IO_11_3 — User I/O bank 11, pin 3 |
| پین 116 | IO_11_4 — User I/O bank 11, pin 4 |
| پین 117 | IO_11_5 — User I/O bank 11, pin 5 |
| پین 118 | IO_11_6 — User I/O bank 11, pin 6 |
| پین 119 | VCCIO_11 — IO bank 11 supply voltage (3.3V) |
| پین 120 | GND — Ground |
| پین 121 | DONE — Configuration done signal |
| پین 122 | PRGM_N — Programming reset, active low |
| پین 123 | CCLK — Configuration clock |
| پین 124 | DIN — Configuration serial data in |
| پین 125 | IO_12_0 — User I/O bank 12, pin 0 |
| پین 126 | IO_12_1 — User I/O bank 12, pin 1 |
| پین 127 | IO_12_2 — User I/O bank 12, pin 2 |
| پین 128 | VCCIO_12 — IO bank 12 supply voltage (3.3V) |
| پین 129 | IO_12_3 — User I/O bank 12, pin 3 |
| پین 130 | IO_12_4 — User I/O bank 12, pin 4 |
| پین 131 | IO_12_5 — User I/O bank 12, pin 5 |
| پین 132 | IO_12_6 — User I/O bank 12, pin 6 |
| پین 133 | IO_12_7 — User I/O bank 12, pin 7 |
| پین 134 | IO_12_8 — User I/O bank 12, pin 8 |
| پین 135 | IO_12_9 — User I/O bank 12, pin 9 |
| پین 136 | IO_12_10 — User I/O bank 12, pin 10 |
| پین 137 | IO_12_11 — User I/O bank 12, pin 11 |
| پین 138 | GND — Ground |
| پین 139 | VCC — Core supply (3.3V) |
| پین 140 | IO_13_0 — User I/O bank 13, pin 0 |
| پین 141 | IO_13_1 — User I/O bank 13, pin 1 |
| پین 142 | IO_13_2 — User I/O bank 13, pin 2 |
| پین 143 | IO_13_3 — User I/O bank 13, pin 3 |
| پین 144 | IO_13_4 — User I/O bank 13, pin 4 |
بەکارهێنانە باوەکان
AT40K10AL-1BQU گونجاوە بۆ 6 بەکارھێنانs: Industrial Glue Logic Replacement, High-Speed Datapath Arithmetic, Image Preprocessing Front-End, ASIC Prototyping Bridge, Embedded DSP Co-Processor, Legacy Industrial Control Logic.
Industrial Glue Logic Replacement
Replaces legacy TTL/CMOS logic on industrial backplanes. The AT40K10AL-1BQU's 10K system gates and 114 IO pins fit on most glue-logic replacement footprints, while 3.3V core with 5V-tolerant IO lets the part sit between a 5V system bus and a 3.3V controller. Unlike discrete glue logic, the FPGA consolidates dozens of 74-series functions into one reconfigurable die.
پێشنیارکراو
High-Speed Datapath Arithmetic
Implements multipliers, MAC units, and FIR filters using the patented eight-sided core cell with diagonal routing. The 1 ns combinatorial delay delivers sub-2.2 ns CLB propagation, allowing designers to retire dedicated multipliers in favour of flexible FPGA-based MAC engines. Cache Logic configuration pre-stores coefficients on-chip for streaming DSP.
پێشنیارکراو
Image Preprocessing Front-End
Buffers and pre-processes image data on the FPGA before downstream DSP/MCU analysis. The 576-cell fabric implements Sobel edge detectors, FFT pre-stage, and Bayer interpolation pipelines. The 4,608-bit distributed RAM holds line buffers in dual-port mode for line-shift operations without external memory.
پێشنیارکراو
ASIC Prototyping Bridge
Acts as a verification bridge before taping out dedicated ASICs. Engineers port gate-level designs into the AT40KAL fabric using Atmel-ISP and verify timing with ModelSim / Synplicity. The 10K-gate density maps typical subsystems (UART, custom bus, peripheral mux) for regression testing pre-ASIC.
پێشنیارکراو
Embedded DSP Co-Processor
Operates as a co-processor alongside an MCU or microcontroller for parallel DSP tasks. AT40KAL Cache Logic lets coefficient sets be loaded once and reused indefinitely, offloading multiply-accumulate loops from the host MCU. The 3.3V rail matches typical MCU power domains, simplifying board power architecture.
پێشنیارکراو
Legacy Industrial Control Logic
Maintains installed industrial machines that rely on discontinued AT40K logic. The AT40K10AL-1BQU's 3.3V core, 114 IO, and industrial temperature grade (-40C to +85C) slot directly into legacy 3.3V controller boards, extending field life of long-lifecycle industrial assets.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ AT40K10AL-1BQU — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | AT40K10AL-1EQG | AT40K10AL-1DQC | AT40K20AL-1BQU | AT40K10AL-1QC |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-LQFP | 144-LQFP | 144-LQFP | 144-LQFP | 144-LQFP |
| System Gates | 10,000 | 10,000 | 10,000 | 20,000 | 10,000 |
| Logic Cells | 576 | 576 | 576 | 1,152 | 576 |
| Maximum Usable Gates | 50,000 | 50,000 | 50,000 | 100,000 | 50,000 |
| Supply Voltage | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V |
| Total RAM Bits | 4,608 | 4,608 | 4,608 | 9,216 | 4,608 |
| Combinatorial Delay | 1 ns | 1 ns | 1 ns | 1 ns | 1 ns |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND |
| Unit Price (qty 1) | 38.52 USD | 44.20 USD | 35.10 USD | 62.00 USD | 36.00 USD |
جیاکەرەوە سەرەکییەکان
- 10K system gates in the small-density Cache Logic family (بەراورد بەAT40K05AL)
- Industrial temperature grade with 144-LQFP option (بەراورد بەAT40K10AL-1BCC)
- 1 ns combinatorial delay for arithmetic (بەراورد بەAT40K40-2EQI)
تێبینییەکانی دیزاین
Decouple each VCC and VCCIO bank with 0.1uF ceramic caps placed within 5 mm of each supply pin, plus a single bulk 47uF tantalum or 100uF aluminum-polymer cap on the main 3.3V rail. The AT40KAL sequencing requires the 3.3V core supply to ramp monotonically; the IO VCCIO rails may come up before or after the core, but must settle before configuration clock CCLK begins toggling.
Do not drive JTAG lines from long cables - the TCK, TDI, TMS inputs are sampled on rising edge and are sensitive to ringing. Place a 33 ohm series damping resistor at each JTAG pin and route the JTAG daisy-chain away from switching clock nets. Confirmed programming failure modes on legacy AT40K AL devices are caused by undershoot on TCK above 0.5 V below ground.
Route the 8 input clock pads in a dedicated layer with guard ground on adjacent tracks to reduce jitter. Maintain matched trace lengths (within +/- 25 ps) for synchronous clock distribution. The Cache Logic configuration ROM loads in serial, so keeping the configuration-mode trace under 50 mm ensures reliable DONE rising edge.
زانیاری پابەندبوون
RoHS compliant per DigiKey product listing. Not AEC-Q100 qualified since this is an FPGA. Industrial temperature grade only - not automotive qualified.