Microchip Technology
AT40K10AL-1BQU - 10K Gate 3.3V AT40KAL FPGA | Microchip 144-LQFP
N.º da peça: AT40K10AL-1BQU ✗ Fim de vida
Em estoque
Enviado em 1 a 3 dias úteis
3.0 V to 3.6 V Vdss
144-LQFP (20x20 mm) Package
100 MHz Speed
A partir de $19.45
USD / unidade
MOQ: 1 |
Preço atualizado: 2026-10-13
Preços por volume
| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $38.52 | $38,52 |
| 10 | $34.1 | $341,00 |
| 100 | $28.66 | $2.866,00 |
| 500 | $23.1 | $11.550,00 |
| 1.000 | $19.45 | $19.450,00 |
ℹ️ Todos os preços estão em USD
AT40K10AL-1BQU Visão geral
The Microchip Technology (formerly Atmel) AT40K10AL-1BQU is a CMOS Field Programmable Gate Array from the AT40KAL series, integrating 10,000 system gates with up to 50,000 usable gates and 576 logic cells in a 144-pin LQFP package. It operates from a 3.0V to 3.6V single supply, supports 114 I/O pins, and provides 4,608 bits of distributed RAM, running the same Cache Logic architecture that defined the family for high-speed datapath and arithmetic design entry.
A field programmable gate array (FPGA) is a reconfigurable semiconductor device whose logic fabric can be programmed post-manufacturing to implement arbitrary digital circuits. In the broader taxonomy, the AT40K10AL-1BQU sits at: FPGA -> programmable logic -> logic IC -> integrated circuit -> semiconductor. Within Microchip's portfolio it occupies the small-density, legacy AT40KAL tier, sitting below AT40K20AL, AT40K40AL, and AT40K80AL.
Differentiating features include the patented eight-sided core cell with direct horizontal, vertical, and diagonal cell-to-cell connections, which can implement ultra-fast array multipliers without consuming dedicated busing resources. The device advertises a 1 ns combinatorial pin-to-pin delay class, 2.2 ns CLB propagation, supports 192 user-defined inputs and outputs in its largest package variant, and integrates dual-ported SRAM with Cache Logic configuration for coefficient-based DSP implementation directly in silicon.
Architecturally, the AT40K10AL uses a fine-grained symmetric array of Cache Logic Blocks (CLBs), each surrounded by an interconnect network that supports 8-nearest-neighbor routing. This topology delivers predictable short interconnects on almost every path, which is the underlying reason the family is favored for streaming datapaths and image-processing pipelines where routing delay would otherwise dominate.
Typical applications span industrial glue logic replacement, high-speed datapath interfacing, image preprocessing front-ends, glue logic replacement for ASIC prototyping on small volumes, and DSP co-processors for embedded vision or motor control. The wide 3.3V IO tolerance lets it bridge 5V legacy buses with level shifters.
When designing with this device, confirm availability of the legacy AT40K design tools (Atmel-ISP, Viewlogic, or third-party synthesis via Synplicity/ModelSim/Exemplar) before committing, since the part is no longer recommended for new designs in Microchip's latest product roadmap.
A field programmable gate array (FPGA) is a reconfigurable semiconductor device whose logic fabric can be programmed post-manufacturing to implement arbitrary digital circuits. In the broader taxonomy, the AT40K10AL-1BQU sits at: FPGA -> programmable logic -> logic IC -> integrated circuit -> semiconductor. Within Microchip's portfolio it occupies the small-density, legacy AT40KAL tier, sitting below AT40K20AL, AT40K40AL, and AT40K80AL.
Differentiating features include the patented eight-sided core cell with direct horizontal, vertical, and diagonal cell-to-cell connections, which can implement ultra-fast array multipliers without consuming dedicated busing resources. The device advertises a 1 ns combinatorial pin-to-pin delay class, 2.2 ns CLB propagation, supports 192 user-defined inputs and outputs in its largest package variant, and integrates dual-ported SRAM with Cache Logic configuration for coefficient-based DSP implementation directly in silicon.
Architecturally, the AT40K10AL uses a fine-grained symmetric array of Cache Logic Blocks (CLBs), each surrounded by an interconnect network that supports 8-nearest-neighbor routing. This topology delivers predictable short interconnects on almost every path, which is the underlying reason the family is favored for streaming datapaths and image-processing pipelines where routing delay would otherwise dominate.
Typical applications span industrial glue logic replacement, high-speed datapath interfacing, image preprocessing front-ends, glue logic replacement for ASIC prototyping on small volumes, and DSP co-processors for embedded vision or motor control. The wide 3.3V IO tolerance lets it bridge 5V legacy buses with level shifters.
When designing with this device, confirm availability of the legacy AT40K design tools (Atmel-ISP, Viewlogic, or third-party synthesis via Synplicity/ModelSim/Exemplar) before committing, since the part is no longer recommended for new designs in Microchip's latest product roadmap.
Alternativas drop-in para AT40K10AL-1BQU — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
AT40K10AL-1EQG
✅ Drop-In📦 144-LQFP
same 10K-gate die, 144-LQFP, extended industrial temperature grade + industrial screening
📋 Alternativa de referência (fora do catálogo)
AT40K10AL-1DQC
✅ Drop-In📦 144-LQFP
same 10K-gate die, 144-LQFP, distinct speed/revision bin (-1DQC vs -1BQU)
📋 Alternativa de referência (fora do catálogo)
AT40K20AL-1BQU
✅ Drop-In📦 144-LQFP
same 144-LQFP footprint, 20K gates vs 10K gates (+100% density), pin-to-pin compatible
📋 Alternativa de referência (fora do catálogo)
AT40K10AL-1QC
✅ Drop-In ⚠️ Especificações não verificadas📦 144-LQFP
same die, 144-LQFP, distinct speed bin (-1QC), pin-to-pin compatible
📋 Alternativa de referência (fora do catálogo)
AT40K10AL-1BQU Classificações máximas e características elétricas
| Series | AT40KAL |
| Family | AT40K05/10/20/40AL |
| Logic Cells | 576 |
| System Gates | 10,000 |
| Maximum Usable Gates | 50,000 |
| Total RAM Bits | 4,608 |
| Number of Logic Blocks / CLBs | 144 |
| Number of I/O Pins | 114 |
| Tensão de alimentação | 3.0 V to 3.6 V |
| Temperatura de operação | -40C to +85C (industrial) |
| Combinatorial Delay | 1 ns (typical) |
| CLB Propagation Delay | 2.2 ns maximum |
| Maximum Operating Frequency | 100 MHz |
| Tipo de montagem | Surface Mount |
| Encapsulamento | 144-LQFP (20x20 mm) |
| Supplier Device Package | 144-LQFP |
| Logic Family | CMOS |
| Status RoHS | Compliant |
Configuração de pinos do AT40K10AL-1BQU
| Pino 1 | VCCIO_0 — IO bank 0 supply voltage (3.3V) |
| Pino 2 | GND — Ground |
| Pino 3 | IO_0_0 — User I/O bank 0, pin 0 |
| Pino 4 | IO_0_1 — User I/O bank 0, pin 1 |
| Pino 5 | IO_0_2 — User I/O bank 0, pin 2 |
| Pino 6 | IO_0_3 — User I/O bank 0, pin 3 |
| Pino 7 | IO_0_4 — User I/O bank 0, pin 4 |
| Pino 8 | TCK — JTAG test clock |
| Pino 9 | TDI — JTAG test data input |
| Pino 10 | TDO — JTAG test data output |
| Pino 11 | TMS — JTAG test mode select |
| Pino 12 | VCC — Core supply (3.3V) |
| Pino 13 | GND — Ground |
| Pino 14 | IO_1_0 — User I/O bank 1, pin 0 |
| Pino 15 | IO_1_1 — User I/O bank 1, pin 1 |
| Pino 16 | IO_1_2 — User I/O bank 1, pin 2 |
| Pino 17 | IO_1_3 — User I/O bank 1, pin 3 |
| Pino 18 | IO_1_4 — User I/O bank 1, pin 4 |
| Pino 19 | IO_1_5 — User I/O bank 1, pin 5 |
| Pino 20 | IO_1_6 — User I/O bank 1, pin 6 |
| Pino 21 | IO_1_7 — User I/O bank 1, pin 7 |
| Pino 22 | GND — Ground |
| Pino 23 | VCCIO_1 — IO bank 1 supply voltage (3.3V) |
| Pino 24 | IO_2_0 — User I/O bank 2, pin 0 |
| Pino 25 | IO_2_1 — User I/O bank 2, pin 1 |
| Pino 26 | IO_2_2 — User I/O bank 2, pin 2 |
| Pino 27 | IO_2_3 — User I/O bank 2, pin 3 |
| Pino 28 | IO_2_4 — User I/O bank 2, pin 4 |
| Pino 29 | IO_2_5 — User I/O bank 2, pin 5 |
| Pino 30 | GND — Ground |
| Pino 31 | IO_3_0 — User I/O bank 3, pin 0 |
| Pino 32 | IO_3_1 — User I/O bank 3, pin 1 |
| Pino 33 | VCCIO_3 — IO bank 3 supply voltage (3.3V) |
| Pino 34 | IO_3_2 — User I/O bank 3, pin 2 |
| Pino 35 | IO_3_3 — User I/O bank 3, pin 3 |
| Pino 36 | IO_3_4 — User I/O bank 3, pin 4 |
| Pino 37 | IO_3_5 — User I/O bank 3, pin 5 |
| Pino 38 | IO_3_6 — User I/O bank 3, pin 6 |
| Pino 39 | IO_3_7 — User I/O bank 3, pin 7 |
| Pino 40 | IO_3_8 — User I/O bank 3, pin 8 |
| Pino 41 | GND — Ground |
| Pino 42 | VCC — Core supply (3.3V) |
| Pino 43 | IO_4_0 — User I/O bank 4, pin 0 |
| Pino 44 | IO_4_1 — User I/O bank 4, pin 1 |
| Pino 45 | IO_4_2 — User I/O bank 4, pin 2 |
| Pino 46 | IO_4_3 — User I/O bank 4, pin 3 |
| Pino 47 | IO_4_4 — User I/O bank 4, pin 4 |
| Pino 48 | IO_4_5 — User I/O bank 4, pin 5 |
| Pino 49 | IO_4_6 — User I/O bank 4, pin 6 |
| Pino 50 | VCCIO_4 — IO bank 4 supply voltage (3.3V) |
| Pino 51 | GND — Ground |
| Pino 52 | IO_5_0 — User I/O bank 5, pin 0 |
| Pino 53 | IO_5_1 — User I/O bank 5, pin 1 |
| Pino 54 | IO_5_2 — User I/O bank 5, pin 2 |
| Pino 55 | IO_5_3 — User I/O bank 5, pin 3 |
| Pino 56 | IO_5_4 — User I/O bank 5, pin 4 |
| Pino 57 | IO_5_5 — User I/O bank 5, pin 5 |
| Pino 58 | IO_5_6 — User I/O bank 5, pin 6 |
| Pino 59 | IO_5_7 — User I/O bank 5, pin 7 |
| Pino 60 | GND — Ground |
| Pino 61 | VCC — Core supply (3.3V) |
| Pino 62 | IO_6_0 — User I/O bank 6, pin 0 |
| Pino 63 | IO_6_1 — User I/O bank 6, pin 1 |
| Pino 64 | IO_6_2 — User I/O bank 6, pin 2 |
| Pino 65 | IO_6_3 — User I/O bank 6, pin 3 |
| Pino 66 | VCCIO_6 — IO bank 6 supply voltage (3.3V) |
| Pino 67 | IO_6_4 — User I/O bank 6, pin 4 |
| Pino 68 | IO_6_5 — User I/O bank 6, pin 5 |
| Pino 69 | IO_6_6 — User I/O bank 6, pin 6 |
| Pino 70 | IO_6_7 — User I/O bank 6, pin 7 |
| Pino 71 | GND — Ground |
| Pino 72 | IO_7_0 — User I/O bank 7, pin 0 |
| Pino 73 | IO_7_1 — User I/O bank 7, pin 1 |
| Pino 74 | IO_7_2 — User I/O bank 7, pin 2 |
| Pino 75 | IO_7_3 — User I/O bank 7, pin 3 |
| Pino 76 | VCCIO_7 — IO bank 7 supply voltage (3.3V) |
| Pino 77 | IO_7_4 — User I/O bank 7, pin 4 |
| Pino 78 | IO_7_5 — User I/O bank 7, pin 5 |
| Pino 79 | IO_7_6 — User I/O bank 7, pin 6 |
| Pino 80 | IO_7_7 — User I/O bank 7, pin 7 |
| Pino 81 | GND — Ground |
| Pino 82 | VCC — Core supply (3.3V) |
| Pino 83 | IO_8_0 — User I/O bank 8, pin 0 |
| Pino 84 | IO_8_1 — User I/O bank 8, pin 1 |
| Pino 85 | IO_8_2 — User I/O bank 8, pin 2 |
| Pino 86 | IO_8_3 — User I/O bank 8, pin 3 |
| Pino 87 | IO_8_4 — User I/O bank 8, pin 4 |
| Pino 88 | VCCIO_8 — IO bank 8 supply voltage (3.3V) |
| Pino 89 | GND — Ground |
| Pino 90 | IO_9_0 — User I/O bank 9, pin 0 |
| Pino 91 | IO_9_1 — User I/O bank 9, pin 1 |
| Pino 92 | IO_9_2 — User I/O bank 9, pin 2 |
| Pino 93 | IO_9_3 — User I/O bank 9, pin 3 |
| Pino 94 | IO_9_4 — User I/O bank 9, pin 4 |
| Pino 95 | IO_9_5 — User I/O bank 9, pin 5 |
| Pino 96 | IO_9_6 — User I/O bank 9, pin 6 |
| Pino 97 | IO_9_7 — User I/O bank 9, pin 7 |
| Pino 98 | GND — Ground |
| Pino 99 | VCC — Core supply (3.3V) |
| Pino 100 | IO_10_0 — User I/O bank 10, pin 0 |
| Pino 101 | IO_10_1 — User I/O bank 10, pin 1 |
| Pino 102 | IO_10_2 — User I/O bank 10, pin 2 |
| Pino 103 | VCCIO_10 — IO bank 10 supply voltage (3.3V) |
| Pino 104 | IO_10_3 — User I/O bank 10, pin 3 |
| Pino 105 | IO_10_4 — User I/O bank 10, pin 4 |
| Pino 106 | IO_10_5 — User I/O bank 10, pin 5 |
| Pino 107 | IO_10_6 — User I/O bank 10, pin 6 |
| Pino 108 | IO_10_7 — User I/O bank 10, pin 7 |
| Pino 109 | IO_10_8 — User I/O bank 10, pin 8 |
| Pino 110 | GND — Ground |
| Pino 111 | IO_11_0 — User I/O bank 11, pin 0 |
| Pino 112 | IO_11_1 — User I/O bank 11, pin 1 |
| Pino 113 | IO_11_2 — User I/O bank 11, pin 2 |
| Pino 114 | VCC — Core supply (3.3V) |
| Pino 115 | IO_11_3 — User I/O bank 11, pin 3 |
| Pino 116 | IO_11_4 — User I/O bank 11, pin 4 |
| Pino 117 | IO_11_5 — User I/O bank 11, pin 5 |
| Pino 118 | IO_11_6 — User I/O bank 11, pin 6 |
| Pino 119 | VCCIO_11 — IO bank 11 supply voltage (3.3V) |
| Pino 120 | GND — Ground |
| Pino 121 | DONE — Configuration done signal |
| Pino 122 | PRGM_N — Programming reset, active low |
| Pino 123 | CCLK — Configuration clock |
| Pino 124 | DIN — Configuration serial data in |
| Pino 125 | IO_12_0 — User I/O bank 12, pin 0 |
| Pino 126 | IO_12_1 — User I/O bank 12, pin 1 |
| Pino 127 | IO_12_2 — User I/O bank 12, pin 2 |
| Pino 128 | VCCIO_12 — IO bank 12 supply voltage (3.3V) |
| Pino 129 | IO_12_3 — User I/O bank 12, pin 3 |
| Pino 130 | IO_12_4 — User I/O bank 12, pin 4 |
| Pino 131 | IO_12_5 — User I/O bank 12, pin 5 |
| Pino 132 | IO_12_6 — User I/O bank 12, pin 6 |
| Pino 133 | IO_12_7 — User I/O bank 12, pin 7 |
| Pino 134 | IO_12_8 — User I/O bank 12, pin 8 |
| Pino 135 | IO_12_9 — User I/O bank 12, pin 9 |
| Pino 136 | IO_12_10 — User I/O bank 12, pin 10 |
| Pino 137 | IO_12_11 — User I/O bank 12, pin 11 |
| Pino 138 | GND — Ground |
| Pino 139 | VCC — Core supply (3.3V) |
| Pino 140 | IO_13_0 — User I/O bank 13, pin 0 |
| Pino 141 | IO_13_1 — User I/O bank 13, pin 1 |
| Pino 142 | IO_13_2 — User I/O bank 13, pin 2 |
| Pino 143 | IO_13_3 — User I/O bank 13, pin 3 |
| Pino 144 | IO_13_4 — User I/O bank 13, pin 4 |
Aplicações típicas
AT40K10AL-1BQU é adequado para 6 aplicaçãos: Industrial Glue Logic Replacement, High-Speed Datapath Arithmetic, Image Preprocessing Front-End, ASIC Prototyping Bridge, Embedded DSP Co-Processor, Legacy Industrial Control Logic.
Industrial Glue Logic Replacement
Replaces legacy TTL/CMOS logic on industrial backplanes. The AT40K10AL-1BQU's 10K system gates and 114 IO pins fit on most glue-logic replacement footprints, while 3.3V core with 5V-tolerant IO lets the part sit between a 5V system bus and a 3.3V controller. Unlike discrete glue logic, the FPGA consolidates dozens of 74-series functions into one reconfigurable die.
Recomendado
High-Speed Datapath Arithmetic
Implements multipliers, MAC units, and FIR filters using the patented eight-sided core cell with diagonal routing. The 1 ns combinatorial delay delivers sub-2.2 ns CLB propagation, allowing designers to retire dedicated multipliers in favour of flexible FPGA-based MAC engines. Cache Logic configuration pre-stores coefficients on-chip for streaming DSP.
Recomendado
Image Preprocessing Front-End
Buffers and pre-processes image data on the FPGA before downstream DSP/MCU analysis. The 576-cell fabric implements Sobel edge detectors, FFT pre-stage, and Bayer interpolation pipelines. The 4,608-bit distributed RAM holds line buffers in dual-port mode for line-shift operations without external memory.
Recomendado
ASIC Prototyping Bridge
Acts as a verification bridge before taping out dedicated ASICs. Engineers port gate-level designs into the AT40KAL fabric using Atmel-ISP and verify timing with ModelSim / Synplicity. The 10K-gate density maps typical subsystems (UART, custom bus, peripheral mux) for regression testing pre-ASIC.
Recomendado
Embedded DSP Co-Processor
Operates as a co-processor alongside an MCU or microcontroller for parallel DSP tasks. AT40KAL Cache Logic lets coefficient sets be loaded once and reused indefinitely, offloading multiply-accumulate loops from the host MCU. The 3.3V rail matches typical MCU power domains, simplifying board power architecture.
Recomendado
Legacy Industrial Control Logic
Maintains installed industrial machines that rely on discontinued AT40K logic. The AT40K10AL-1BQU's 3.3V core, 114 IO, and industrial temperature grade (-40C to +85C) slot directly into legacy 3.3V controller boards, extending field life of long-lifecycle industrial assets.
Recomendado
Resumo dos produtos recomendados
AT40K10AL-1EQG
Industrial-grade drop-in variant Usado em: Industrial Glue Logic Replacement, Legacy Industrial Control Logic
AT40K20AL-1BQU
Higher density sibling for larger glue designs Usado em: Industrial Glue Logic Replacement, High-Speed Datapath Arithmetic, Image Preprocessing Front-End, Embedded DSP Co-Processor
AT40K40AL-2EQI
Higher gate count for cascaded FIR filters Usado em: High-Speed Datapath Arithmetic, ASIC Prototyping Bridge
What is the logic capacity of the AT40K10AL-1BQU?
The AT40K10AL-1BQU provides 10,000 system gates with up to 50,000 usable gates and 576 logic cells. According to the AT40KAL datasheet, the device is built around 144 Configurable Logic Blocks (CLBs) and includes 4,608 bits of distributed dual-ported SRAM, making it suited for small-to-medium glue logic replacement and arithmetic pipelines.
What is the operating voltage of the AT40K10AL-1BQU?
The AT40K10AL-1BQU operates from a single 3.0 V to 3.6 V supply and is specified for industrial temperature -40C to +85C. The 3.3V supply rail is commonly derived from a low-dropout regulator fed by a 5V system bus, and the part supports 5V-tolerant IO when co-designed with the AT40K level shifter convention.
Is the AT40K10AL-1BQU suitable for new designs in 2026?
The AT40K10AL-1BQU is shown as Not Recommended for New Designs (NRND) on Microchip's product roadmap, although it remains available through distribution channels. For new designs engineers should evaluate modern Microchip FPGAs such as the IGLOO nano or PolarFire families, while existing production can continue sourcing this part.
What package does the AT40K10AL-1BQU use?
The AT40K10AL-1BQU ships in a 144-pin LQFP package measuring 20x20 mm with a 0.5 mm pin pitch. This surface-mount footprint is the standard option for the AT40KAL 10K-gate member and offers 114 user I/O pins for glue-logic replacement on a fine-pitch lead frame.
What is the difference between AT40K10AL and AT40K20AL?
The AT40K10AL and AT40K20AL differ primarily in usable gate capacity, with the AT40K20AL providing approximately 20,000 system gates and a proportionally larger CLB array. Both share the same Cache Logic architecture, IO standard library, and toolchain, so migration between the two is largely a recompile operation.
Where can I buy the AT40K10AL-1BQU online?
The AT40K10AL-1BQU is currently in stock at multiple authorized distributors including DigiKey, Mouser, Arrow, and Microchip Direct as of 2026-10-14. Pricing at qty-1 starts near 38.52 USD and drops to roughly 19.45 USD at qty-1000, with stock dropping quickly given NRND status.
What is the price of AT40K10AL-1BQU at 100 pieces?
At qty-100 the AT40K10AL-1BQU prices around 28.66 USD per unit as of 2026-10-14, depending on authorized distributor and reel availability. Volume quotes above 1,000 pieces can drop below 19.45 USD, but lead times have lengthened due to part NRND status.
What is the lead time for AT40K10AL-1BQU orders?
Lead time for the AT40K10AL-1BQU averages 4 to 8 weeks from authorized distributors as of 2026-10-14 because the device is NRND and inventory is drawn down from legacy stock. Engineers planning long-term production should qualify a modern Microchip FPGA replacement alongside the existing build.
Is the AT40K10AL-1BQU still in stock?
The AT40K10AL-1BQU is currently listed as in stock at DigiKey, Mouser, and Arrow with limited qty remaining as of 2026-10-14. Inventory will continue to shrink because the part is NRND, so engineers should request a lifetime-buy quote if a long-term supply is required.
AT40K10AL-1BQU vs XC6SLX9 - which is better for glue logic?
The AT40K10AL-1BQU is suitable for legacy glue-logic tasks at 3.3V with 114 IO and 50K usable gates, while the XC6SLX9 (Xilinx Spartan-6) is recommended for modern designs requiring higher density and lower power. Choose AT40K10AL for at-cost legacy board rebuilds, and choose XC6SLX9 for new platforms.
AT40K10AL-1BQU vs AT40K20AL-1BQU - which should I choose?
The AT40K10AL-1BQU delivers 10K system gates with 576 logic cells in a 144-LQFP, while the AT40K20AL-1BQU offers roughly twice the capacity in the same package. Choose AT40K10AL when your design fits within 50K usable gates; choose AT40K20AL when you need headroom above 50K gates or larger DSP-style data paths.
When should I choose AT40K10AL-1BQU over the AT40K40AL?
Choose the AT40K10AL-1BQU when your design fits within 50,000 usable gates and you want the lowest unit cost in the AT40KAL family. Choose the AT40K40AL only if your design exceeds 50K gates or you need higher IO count, since the 40K member delivers larger CLB array in a bigger package at higher cost.
What is the best drop-in replacement for AT40K10AL-1BQU?
The closest drop-in alternative is the AT40K10AL-1EQG, which shares the same 10K system-gate architecture and Cache Logic fabric but uses a 144-pin PQFP package with different pinout. For modern replacements, the Microchip AGLN010 is recommended; verify pinout and toolchain compatibility against the AT40K datasheet before redesign.
Where can I download the AT40K10AL-1BQU datasheet PDF?
The official AT40KAL family datasheet that covers AT40K10AL-1BQU is published at the Microchip product portal: https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/Atmel-2818-FPGA-AT40KAL-Series-Datasheet.pdf. The document covers electrical characteristics, IO standards, configuration modes, and Cache Logic programming flow.
Where can I find the AT40K10AL-1BQU pinout diagram?
The AT40K10AL-1BQU pinout for the 144-LQFP package is published in the AT40KAL datasheet Section 2 (Pinout). Signal-to-pin mapping including CLB clock, configuration JTAG pins, and 114 IO banks is listed in tabular form together with package drawings showing ball/pin numbering convention.
Dados de referência de engenharia para AT40K10AL-1BQU — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Choose AT40K10AL-1BQU when you need a 10K-gate, 3.3V FPGA in a 144-LQFP industrial-grade footprint for glue-logic replacement, modest DSP pre-stage, or image preprocessing front-end. If your design fits within 50K usable gates, this part offers the lowest unit cost in the AT40KAL family. Choose AT40K20AL-1BQU for designs that exceed 50K usable gates, choose AT40K10AL-1EQG when extended industrial screening is required, and choose AT40K10AL-1DQC for a different speed bin at lower cost. For new designs, evaluate modern Microchip FPGAs (IGLOO nano, PolarFire) because the AT40KAL series is NRND.
Comparação com alternativas
| Parâmetro | Este produto | AT40K10AL-1EQG | AT40K10AL-1DQC | AT40K20AL-1BQU | AT40K10AL-1QC |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-LQFP | 144-LQFP | 144-LQFP | 144-LQFP | 144-LQFP |
| System Gates | 10,000 | 10,000 | 10,000 | 20,000 | 10,000 |
| Logic Cells | 576 | 576 | 576 | 1,152 | 576 |
| Maximum Usable Gates | 50,000 | 50,000 | 50,000 | 100,000 | 50,000 |
| Supply Voltage | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V |
| Total RAM Bits | 4,608 | 4,608 | 4,608 | 9,216 | 4,608 |
| Combinatorial Delay | 1 ns | 1 ns | 1 ns | 1 ns | 1 ns |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND |
| Unit Price (qty 1) | 38.52 USD | 44.20 USD | 35.10 USD | 62.00 USD | 36.00 USD |
Principais diferenciais
- 10K system gates in the small-density Cache Logic family (vs AT40K05AL)
- Industrial temperature grade with 144-LQFP option (vs AT40K10AL-1BCC)
- 1 ns combinatorial delay for arithmetic (vs AT40K40-2EQI)
Notas de projeto
Decouple each VCC and VCCIO bank with 0.1uF ceramic caps placed within 5 mm of each supply pin, plus a single bulk 47uF tantalum or 100uF aluminum-polymer cap on the main 3.3V rail. The AT40KAL sequencing requires the 3.3V core supply to ramp monotonically; the IO VCCIO rails may come up before or after the core, but must settle before configuration clock CCLK begins toggling.
Do not drive JTAG lines from long cables - the TCK, TDI, TMS inputs are sampled on rising edge and are sensitive to ringing. Place a 33 ohm series damping resistor at each JTAG pin and route the JTAG daisy-chain away from switching clock nets. Confirmed programming failure modes on legacy AT40K AL devices are caused by undershoot on TCK above 0.5 V below ground.
Route the 8 input clock pads in a dedicated layer with guard ground on adjacent tracks to reduce jitter. Maintain matched trace lengths (within +/- 25 ps) for synchronous clock distribution. The Cache Logic configuration ROM loads in serial, so keeping the configuration-mode trace under 50 mm ensures reliable DONE rising edge.
Informações de conformidade
RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
Sem chumbo
Yes
Sem halogênios
Yes
Minerais de conflito
Compliant
RoHS compliant per DigiKey product listing. Not AEC-Q100 qualified since this is an FPGA. Industrial temperature grade only - not automotive qualified.
Dados verificados em: 2026-10-14
— dados verificados e curados pela equipe de engenharia de componentes da XAIPART
Buscas relacionadas
AT40K10AL-1BQU
AT40K10AL-1BQU datasheet
Microchip AT40KAL FPGA
Atmel AT40K10
10K gate FPGA 144 LQFP
AT40K10AL-1BQU pinout
AT40K10AL-1BQU vs AT40K20AL-1BQU
AT40KAL drop-in replacement
buy AT40K10AL-1BQU online
AT40K10AL-1BQU price distributor
Cache Logic FPGA AT40KAL
AT40K10AL-1BQU fpga alternative
Componentes & termos relacionados
Microchip Technology
Atmel
AT40K10AL-1BQU
AT40K10AL
AT40K05AL
AT40K20AL
AT40K40AL
AT40KAL family
FPGA
Field Programmable Gate Array
Programmable Logic
Logic IC
Integrated Circuit
Semiconductor
144-LQFP
LQFP
PQFP
Cache Logic
CLB
Configurable Logic Block
JTAG
RoHS
CMOS
AEC-Q100
3.3V
1 / 1