EP4CE15F17I7N - 15,408 LEs, 165 I/O Cyclone IV E | Intel
MPN: EP4CE15F17I7N ✓ چالاکEP4CE15F17I7N گشتی
An FPGA is a programmable semiconductor in which digital logic blocks, memory, and I/O are configured after manufacture. A Cyclone IV E FPGA occupies the middle of the programmable-logic hierarchy: it is more capable than basic CPLDs, yet it targets cost-sensitive control, networking, sensor-processing, and industrial applications rather than the very high performance and power of larger FPGA families. The EP4CE15F17I7N belongs to the EP4CE15 device family and the Cyclone IV E product series.
The device provides 15,408 logic elements and 165 I/O for parallel interface implementation, while its 504 kbit of embedded memory supports buffering, packet queues, data tables, and small state machines. Its 256-pin LBGA supplies a high pin count in a compact land-grid array, making the device practical for boards with several high-speed transceivers, parallel sensor banks, or external memory interfaces. The industrial-grade ordering option supports extended-temperature operation where the surrounding system must tolerate wider ambient conditions.
The 60 nm process and Cyclone IV E architecture balance programmable logic density against static power, dynamic power, and routing resources. This makes the EP4CE15F17I7N appropriate for control logic with moderate computational requirements, multi-interface aggregation, low-cost protocol bridging, and embedded test systems. Quartus tooling and the associated device support packages simplify configuration and design implementation.
Typical uses include industrial data-acquisition controllers, communication gateways, motion-control interfaces, test-and-measurement front ends, and embedded sensor hubs. The 165 I/O count permits multiple external buses to terminate directly on the FPGA, while the embedded memory can absorb short bursts and reduce traffic to an external processor. Designs requiring larger frame buffers or substantially higher logic density should move to a larger Cyclone IV E member.
The main layout consideration is the 256-ball land-grid array. Every ball must be assigned a package pin in the Quartus pin planner, power and ground balls must follow the manufacturer layout guidance, and decoupling must be placed at the associated supply pins. Confirm the exact pin definitions, voltage limits, configuration requirements, and thermal limits against the EP4CE15F17I7N datasheet before releasing the board layout.
This page combines the verified device identity, package details, family comparisons, and engineering guidance with a focused drop-in analysis. It highlights where the I7 industrial grade is appropriate, where the commercial C8 variant changes qualification requirements, and why FPGA substitutions require more than a matching ball count.
جێگرەوەکانی جێگۆڕکێ بۆ EP4CE15F17I7N — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ EP4CE15F17I7N (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Process Technology, Device Type, Embedded Memory, Logic Elements.
EP4CE15F17C8N
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EP4CE10F17C8LN
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EP4CE15F17I7N زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Cyclone IV E field-programmable gate array |
| Logic Elements | 15,408 LE |
| User I/O | 165 I/O |
| Embedded Memory | 504 kbit |
| Process Technology | 60 nm CMOS |
| پاکێج | 256-pin LBGA |
| Temperature Grade | Industrial grade, I7 |
| Device Family | EP4CE15 |
| Product Series | Cyclone IV E |
| Manufacturer | Intel / Altera |
| جۆری دامەزراندن | Surface mount |
| Programmable Logic Type | SRAM-based FPGA |
ڕێنمایی ڕێکخستنی پینی EP4CE15F17I7N 256-pin lbga
ڕێکخستنی پین بۆ EP4CE15F17I7N (پاکێجی 256-pin lbga). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ EP4CE15F17I7N.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
EP4CE15F17I7N گونجاوە بۆ 6 بەکارھێنانs: Industrial Data-Acquisition Controller, Machine Vision Pre-Processor, Communication Protocol Gateway, Programmable Logic Controller, Test and Measurement Front End, Embedded Sensor and Diagnostics Hub.
Industrial Data-Acquisition Controller
EP4CE15F17I7N fits an industrial acquisition controller that must combine several sensor inputs with local filtering and protocol handling. Its 165 I/O allow parallel sensor banks, digital lines, counters, and communications ports to share one programmable controller, while 504 kbit of embedded memory can hold calibration tables and short capture buffers. The I7 industrial ordering grade is appropriate when the enclosure experiences wider ambient-temperature conditions. Use Quartus to partition acquisition channels, and verify acquisition timing, input standards, and pin placement against the manufacturer datasheet.
پێشنیارکراو
Machine Vision Pre-Processor
The EP4CE15F17I7N can act as a pre-processor between a vision sensor and an external processor by performing thresholding, region selection, and data reduction in parallel logic. Its 15,408 logic elements are suitable for moderate image-formatting pipelines rather than large full-frame processing engines, and 165 I/O supports parallel pixel buses, synchronization inputs, and fast output channels. The 504 kbit of embedded memory can buffer short line or tile data before transfer. Place high-speed I/O on the appropriate banks and complete static timing analysis for every pixel-clock domain.
پێشنیارکراو
Communication Protocol Gateway
EP4CE15F17I7N is suited to protocol-conversion gateways that receive parallel or low-speed serial data and translate it into a standardized uplink. Multiple logical engines can run concurrently, including framing, CRC generation, timeout management, and queue control, while 504 kbit of embedded memory supports transmit and receive buffers. The 165 I/O give the designer flexibility for parallel byte buses, byte-stream interfaces, and control signals. Validate protocol timing, clock-domain crossings, and I/O standards because a package match alone does not guarantee timing compatibility across designs.
پێشنیارکراو
Programmable Logic Controller
EP4CE15F17I7N provides enough programmable logic for a compact PLC or embedded controller that combines deterministic I/O handling, state machines, timers, and local diagnostics. Its 165 I/O supports numerous field inputs and outputs, while embedded memory can hold task schedules, lookup values, or event histories. The I7 industrial-grade ordering designation is useful for factory equipment exposed to elevated ambient temperatures. Keep safety functions outside a single programmable FPGA unless the system architecture and certification process explicitly permit it, and verify all timing paths after Quartus compilation.
پێشنیارکراو
Test and Measurement Front End
EP4CE15F17I7N can implement a programmable front end for automated test equipment, combining pattern generation, response capture, timing supervision, and instrument-control logic. The 165 I/O accommodates parallel data buses and control channels, while 504 kbit of embedded memory is useful for short capture records and expected-response tables. Because measurement accuracy depends on deterministic routing and clean clock distribution, constrain all timing-critical paths, use dedicated clock-capable pins where required, and check skew and jitter budget during hardware design.
پێشنیارکراو
Embedded Sensor and Diagnostics Hub
EP4CE15F17I7N works well as a sensor-hub controller that normalizes readings from multiple embedded sensors and applies thresholds before forwarding results. Parallel sensors, counters, and status lines can connect across 165 I/O, while the 504 kbit embedded memory stores calibration coefficients, history windows, or diagnostic event flags. Parallel logic engines can update channels concurrently and support local fault reporting when the host processor becomes unavailable. Review input thresholds, isolation requirements, and timing margins, and use the manufacturer power and decoupling guidance for every supported supply rail.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ EP4CE15F17I7N — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | EP4CE15F17C8N | EP4CE10F17C8LN |
|---|---|---|---|
| Brand | Intel / Altera | Intel / Altera | Intel / Altera |
| Package | 256-pin LBGA | 256-pin LBGA, F17 configuration | 256-pin LBGA, F17 configuration |
| Device Family | EP4CE15 | EP4CE15 | EP4CE10 |
| Temperature Grade | Industrial grade, I7 | Commercial grade, C8 | Commercial grade, C8 |
| Product Series | Cyclone IV E | Cyclone IV E | Cyclone IV E |
جیاکەرەوە سەرەکییەکان
- Industrial-grade ordering option within the EP4CE15 family (بەراورد بەEP4CE15F17C8N)
- Higher logic capacity than the lower-density F17 option (بەراورد بەEP4CE10F17C8LN)
- High pin count for multi-interface equipment (بەراورد بەEP4CE15F17C8N)
تێبینییەکانی دیزاین
The EP4CE15F17I7N uses a 256-ball land-grid array, so every ball must be assigned in the Quartus pin planner and checked against the package pin table. Keep decoupling close to the associated power and ground balls, preserve the manufacturer-recommended supply structure, and route high-speed clocks to dedicated clock-capable pins. Review the final ball assignment for accidental conflicts with configuration pins before fabrication.
Do not treat the EP4CE15F17C8N as an unconditional substitute for the EP4CE15F17I7N. The C8 version is a commercial-temperature ordering option, while I7 identifies the industrial grade. A PCB can be electrically unchanged, but the qualification requirement can still fail. Confirm ambient temperature, enclosure heating, timing, configuration method, and any application-specific certification before releasing the substitution.
Reserve adequate placement and routing flexibility for high-speed memory or parallel sensor interfaces even when the initial design uses only part of the 165 I/O. Constrain interface timing in Quartus, analyze clock-domain crossings, and account for LBGA escape-routing congestion. If an interface requires a different logic density or I/O arrangement, use the pin planner to identify conflicts before committing the board outline.
زانیاری پابەندبوون
The I7 code identifies an industrial-temperature device, not an automotive qualification. RoHS, REACH, halogen-free, lead-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or a lot-specific compliance report.