INA132UA - Low-Power Difference Amplifier | Texas Instruments
MPN: INA132UA ✓ چالاکINA132UA گشتی
A difference amplifier is a specialized operational-amplifier circuit that measures the voltage difference between two input nodes while rejecting voltage common to both inputs. Within the amplifier-IC hierarchy, the INA132UA belongs to the precision instrumentation-amplifier family, combining an operational amplifier, precision gain-setting resistors, and high common-mode rejection in one package. This integration reduces external component count while preserving accurate gain behavior across temperature.
The principal features of the INA132UA include 90 dB common-mode rejection, ±0.075% maximum gain error, and 0.001% maximum nonlinearity. Its internal resistors are laser trimmed for accurate gain, and their temperature-coefficient tracking helps preserve gain accuracy and common-mode rejection over operating temperature. The low-power architecture operates from a single supply as high as 36 V, making it suitable for both compact battery-powered systems and higher-voltage industrial instrumentation.
The INA132UA uses a unity-gain architecture, so the differential output is scaled 1:1 from the difference between its inputs. The internal precision resistor network establishes the gain relationship without an external gain-setting resistor. Its common-mode rejection is particularly important when a small sensor signal is superimposed on a larger reference or supply-derived voltage, because the amplifier attenuates the common component while retaining the differential measurement.
Typical applications include bridge-sensor and transducer signal conditioning, current-shunt measurement, battery and power-system monitoring, industrial process-control instrumentation, and precision analog sensing. The device is also appropriate for low-side current sensing when the input common-mode voltage remains within the operating range. Its 8-pin SOIC footprint supports conventional surface-mount assembly.
Designers should preserve the input common-mode and output-voltage limits, provide stable input and output bypassing, and verify that source impedances remain compatible with the amplifier's input and common-mode performance. The low quiescent current reduces supply demand, but input bias current and common-mode behavior still determine accuracy in high-impedance sensor circuits. The manufacturer pin-description table should be used when assigning PCB tracks and confirming polarity.
This product record combines the device's manufacturer-defined characteristics with same-package replacement guidance, application-specific engineering context, and practical layout considerations. It is intended to help engineers identify whether the unity-gain INA132UA fits a differential-measurement design without confusing it with wider-gain or different-supply-range amplifier families.
جێگرەوەکانی جێگۆڕکێ بۆ INA132UA — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ INA132UA (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Slew Rate, Input Offset Voltage, Operating Temperature Range.
INA132U
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →INA137UA
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →INA166UA
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →INA143UA
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →AD8278ARZ
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
INA132UA زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Low-power, unity-gain difference amplifier |
| Number of Channels | 1 channel |
| Gain | 1 V/V (unity gain) |
| Single-Supply Voltage Range | Up to 36 V |
| Dual-Supply Voltage Range | ±18 V |
| ئێستای ئارام | 160 uA |
| Gain-Bandwidth Product | 300 kHz |
| Input Offset Voltage | 500 uV maximum |
| Gain Error | ±0.075% maximum |
| Nonlinearity | 0.001% maximum |
| Common-Mode Rejection | 90 dB minimum |
| Slew Rate | 100 mV/us minimum |
| مەودای پلەی گەرمیی کارکردن | -55°C to +125°C |
| پاکێج | 8-pin SOIC |
| جۆری دامەزراندن | Surface mount |
| Internal Gain Resistors | Laser trimmed |
ڕێنمایی ڕێکخستنی پینی INA132UA 8-pin soic
ڕێکخستنی پین بۆ INA132UA (پاکێجی 8-pin soic). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ INA132UA.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
INA132UA گونجاوە بۆ 6 بەکارھێنانs: Low-Side Current Sensing, Bridge Transducer Signal Conditioning, Power-Supply and Battery Monitoring, Industrial Process Sensing, Precision Analog Sensor Interface, Portable Instrumentation.
Low-Side Current Sensing
The INA132UA fits low-side shunt sensing because its unity gain transfers the differential voltage across the shunt directly to the output. According to the manufacturer datasheet, the device provides 90 dB common-mode rejection, which helps suppress voltage common to both shunt terminals, and its maximum input offset is 500 uV. Place the amplifier across the shunt and keep the routing compact to avoid adding resistance or coupled noise. The principal trade-off is that systems with very small shunt drops must include 500 uV offset in the measurement-error budget.
پێشنیارکراو
Bridge Transducer Signal Conditioning
The INA132UA is appropriate for bridge-based pressure, strain, and resistive sensors whose output is a small differential signal around a larger excitation-related voltage. Its 90 dB common-mode rejection helps preserve bridge sensitivity, while the laser-trimmed internal network supports gain accuracy of ±0.075% maximum. The circuit uses the amplifier to convert the bridge imbalance into a single-ended measurement without an external gain resistor. Engineers should verify the bridge excitation voltage against the input common-mode range and include sensor and amplifier tolerance in the final accuracy calculation.
پێشنیارکراو
Power-Supply and Battery Monitoring
The INA132UA can monitor a differential voltage in battery-management or power-system feedback circuitry while operating from a supply as high as 36 V. Its 160 uA quiescent current is useful in low-power systems, and the unity-gain architecture simplifies signal-path calculations. The device can be placed across a sense element when the common-mode and output levels remain within its linear operating limits. Unlike a dedicated ADC front end, this amplifier does not perform conversion; it supplies a conditioned analog voltage for comparison or digitization.
پێشنیارکراو
Industrial Process Sensing
The INA132UA supports industrial process sensing where a transmitter or sensor produces a differential signal superimposed on a common-mode voltage. Its 90 dB common-mode rejection improves rejection of shared process-control disturbances, while the broad supply range accommodates both compact instrumentation and higher-voltage signal chains. A practical implementation places the amplifier close to the sensor connector, uses a stable reference configuration, and routes the output into the controller or converter stage. The design must still verify noise, bandwidth, grounding, and the -55°C to +125°C temperature range.
پێشنیارکراو
Precision Analog Sensor Interface
The INA132UA is suitable as the first analog stage for a precision sensor when the desired transfer function is unity gain and the input is differential. Its 500 uV maximum offset and ±0.075% maximum gain error provide defined limits for front-end error analysis, while 300 kHz bandwidth covers signals well below audio and communications operating bands. The amplifier should operate with the sensor's return path referenced appropriately to minimize ground-error pickup. Source impedance, bias current, input filtering, and output loading must be considered when setting the practical resolution of the measurement chain.
پێشنیارکراو
Portable Instrumentation
The INA132UA fits portable, battery-powered instrumentation because its 160 uA quiescent current limits standing supply demand and its 8-pin SOIC package supports compact surface-mount layouts. The unity-gain differential path can condition a sensor output without requiring an external gain-setting network. Portable systems still need careful reference grounding and layout control, because battery return paths and dynamic loads can introduce common-mode and ground errors. Selecting a stable reference and limiting the amplifier's input bandwidth help reduce sensitivity to high-frequency interference.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ INA132UA — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | INA132U | INA137UA | INA166UA | INA143UA | AD8278ARZ |
|---|---|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices |
| Product Type | Unity-gain difference amplifier | Unity-gain difference amplifier | Difference amplifier | Difference amplifier | Difference amplifier | Difference amplifier |
جیاکەرەوە سەرەکییەکان
- Higher characterized temperature range than INA132U (بەراورد بەINA132U)
- Higher maximum single-supply rating than INA143UA (بەراورد بەINA143UA)
- Higher maximum single-supply rating than AD8278ARZ (بەراورد بەAD8278ARZ)
- Defined low-power operating point (بەراورد بەINA137UA)
تێبینییەکانی دیزاین
Route the differential input pair as a short, tightly coupled pair and connect it directly to the amplifier inputs. Avoid sharing long return paths with switching or digital return currents, because any voltage common to the two inputs appears as an unwanted measurement signal. Place the amplifier close to the shunt or sensor connector so that input-loop area remains small. This is particularly important when the measured differential voltage is close to the device's 500 uV maximum offset.
Do not treat the 36 V supply rating as a guarantee that the amplifier can accept 36 V at every input and output level. Verify the input common-mode range, output swing, supply configuration, and reference connection for the operating point. Also distinguish INA132UA from INA132U by temperature grade: the former supports -55°C to +125°C, while the latter is specified for -40°C to +85°C.
Use the manufacturer's pin-description table to preserve the specified reference and feedback configuration for unity-gain operation. Keep output loading within the device's limits and place any required input or output bypass capacitors close to their associated pins. Because the device has a 300 kHz gain-bandwidth product, additional filtering should be designed around the intended signal bandwidth rather than added indiscriminately.
The 160 uA quiescent current is a major benefit in portable systems, but the total supply current includes input bias, output load, and reference-network demand. Estimate operating consumption from the actual load and temperature range, then verify that the source can support startup and dynamic output movement. If the same supply rail carries switching currents, verify the amplifier's common-mode rejection cannot compensate for excessive supply ripple or ground movement.
زانیاری پابەندبوون
Compliance status must be confirmed against the current manufacturer product documentation for the exact INA132UA orderable suffix. A differential amplifier is not inherently AEC-Q100 qualified without an explicit automotive qualification statement.