INA2137PA - Dual ±6 dB Audio Receiver | Texas Instruments
MPN: INA2137PA ✓ چالاکINA2137PA گشتی
A differential line receiver is an analog amplifier circuit that compares two input voltages and amplifies their difference. In an audio system, a balanced source sends signal through one conductor and an inverted copy through the other. The receiver rejects voltage shared by both conductors, reducing interference pickup compared with a single-ended input. The INA2137 family is associated with the audio differential line receiver category, the amplifier IC hierarchy, and the broader signal-conditioning and audio interface domain.
The INA2137 uses selectable differential gain. Texas Instruments describes a basic one-half gain configuration for differential reception, while reversing the input and feedback resistors produces a gain of 2, corresponding to +6 dB. This arrangement allows a designer to select between attenuation and gain without changing the receiver footprint. The same guidance identifies INA134 and INA2134 as devices intended for unity-gain reception where that behavior is required.
The INA2137 family is suitable for professional audio, consumer audio, line-level balanced inputs, instrumentation, and other applications in which a small differential signal must be recovered from a noisy environment. Because the package is a through-hole PDIP, it also supports prototyping and designs assembled with conventional plated-through-hole techniques. Its 14-pin arrangement provides separate positive and negative inputs, output connections, reference pins, and supply connections for two channels.
Designers should follow the manufacturer's application schematics when assigning input and feedback resistors. Resistor ratios determine whether each channel operates at one-half gain or a gain of 2. Reference and supply connections must be handled according to the pin-description table in the manufacturer datasheet, particularly when using the reference pins for biasing or output offset management. Decoupling capacitors should be placed close to the device’s supply pins to limit supply-current transients and preserve signal integrity.
The INA2137PA is best suited to balanced audio links where -6 dB or +6 dB channel gain is useful and a 14-pin PDIP package fits the assembly process. For unity-gain systems, compare the INA134 or INA2134 families because the INA2137’s documented resistor-configured gains are one-half and 2. This page combines the manufacturer’s device description with practical configuration guidance, package details, sourcing paths, and engineering-oriented replacement analysis.
جێگرەوەکانی جێگۆڕکێ بۆ INA2137PA — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ INA2137PA (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Supply Voltage Range, Common-Mode Rejection Ratio, Number of Channels, Product Type.
INA137PA
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →INA2137P
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
INA2137PA زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Dual audio differential line receiver |
| Channel Count | 2 channels |
| Nominal Gain Option 1 | 0.5 (-6 dB) |
| Nominal Gain Option 2 | 2 (+6 dB) |
| پاکێج | 14-pin PDIP (N) |
| جۆری دامەزراندن | Through-hole |
| Supply Voltage Options | 9 V, 12 V, 15 V, 18 V, 24 V, or 28 V |
| Input Configuration | Differential |
| Signal Category | Audio |
| Manufacturer | Texas Instruments |
ڕێنمایی ڕێکخستنی پینی INA2137PA 14-pin pdip (n)
ڕێکخستنی پین بۆ INA2137PA (پاکێجی 14-pin pdip (n)). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ INA2137PA.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
INA2137PA گونجاوە بۆ 6 بەکارھێنانs: Balanced Audio Line Input, Professional Audio Interface, Consumer Audio Equipment, Audio ADC Signal Conditioning, Balanced Instrumentation Input, Studio Monitor Preamp.
Balanced Audio Line Input
The INA2137PA fits balanced audio receivers because each channel extracts the difference between two input conductors and can be configured for 1/2 gain (-6 dB) or gain of 2 (+6 dB). Place the IC between the balanced input connector and the following audio-processing stage, then select input and feedback resistors according to the manufacturer diagrams. The -6 dB option can reduce signal level before downstream conversion, while the +6 dB option provides modest recovery for a low-level source. In both cases, confirm output headroom and preserve the intended channel polarity. The dual architecture supports two audio channels in one 14-pin PDIP package.
پێشنیارکراو
Professional Audio Interface
The INA2137PA can serve as the analog front end of a professional audio interface when balanced inputs must reject common-mode interference. Its two receiver channels provide a practical way to recover line-level differential signals before an audio codec or converter. Select the 1/2-gain configuration when attenuation is needed to keep the signal within the next stage’s input range, or use gain of 2 when a low-level source requires modest amplification. Route the two conductors to separate input pins and keep the feedback network compact. Validate signal polarity, common-mode behavior, and output swing using the final channel configuration rather than assuming every operating point is interchangeable.
پێشنیارکراو
Consumer Audio Equipment
The INA2137PA is suitable for consumer audio equipment that accepts a balanced source but also contains noisy or unbalanced internal circuitry. The differential receiver rejects voltage common to both inputs, helping preserve the intended audio difference from common-mode pickup. Its two channels support stereo or dual-mono implementations, and its documented -6 dB and +6 dB choices allow adaptation to the source level. Connect the receiver after input protection and before mixing, conversion, or digital processing stages. The 14-pin through-hole package is useful for mixed-assembly and prototype boards, while the external resistor network must follow the manufacturer’s documented polarity and ratio arrangements.
پێشنیارکراو
Audio ADC Signal Conditioning
The INA2137PA can condition a balanced audio signal before it reaches an analog-to-digital converter. The -6 dB configuration can bring a larger line-level signal into the converter’s usable range, while gain of 2 can improve the amplitude of a smaller source. Place the receiver close enough to the input connector that unbalanced lead segments do not reintroduce common-mode noise. Use the gain configuration that preserves adequate converter headroom and avoids clipping, and check the converter’s differential or single-ended input architecture before finalizing the connection. The receiver’s differential behavior is especially useful when the converter is referenced to a noisy analog ground environment.
پێشنیارکراو
Balanced Instrumentation Input
The INA2137PA can be used as a general-purpose differential receiver for instrumentation signals whenever the required gain is 1/2 or 2 and the signal is compatible with the device’s electrical limits. Its dual-channel structure allows related measurements to be captured without using separate single-channel packages. Connect each measured quantity as a differential pair, observe the recommended resistor arrangement, and account for the gain of 2 reducing available output headroom. Keep sensitive input traces away from switching nodes and maintain a continuous return path to reduce additional pickup. Verify the actual common-mode range, bandwidth, noise, and output swing against the measurement requirements before using the receiver outside conventional audio signals.
پێشنیارکراو
Studio Monitor Preamp
The INA2137PA fits a studio-monitor preamp input because balanced interconnects can experience hum and electromagnetic pickup, while the receiver’s differential architecture suppresses the shared component. Use the 1/2-gain arrangement to attenuate a hot line source, or choose gain of 2 for a lower-level source while checking headroom at maximum program level. The two channels support left and right monitor inputs in a shared package. Position the device after the input connector and before gain-control or conversion circuitry, and keep the feedback resistors close to their associated pins. A prototype built with the 14-pin PDIP package is also convenient for evaluating channel symmetry and input polarity before committing to a smaller production layout.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ INA2137PA — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | INA137PA | INA2137P |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-pin PDIP (N) | 14-pin PDIP (N) | 14-pin PDIP (N) |
| Channel Count | 2 channels | 2 channels | 2 channels |
| Product Type | Dual audio differential line receiver | Audio differential line receiver | Dual audio differential line receiver |
| Gain Configuration | 1/2 (-6 dB) or 2 (+6 dB) | 1/2 (-6 dB) or 2 (+6 dB) | 1/2 (-6 dB) or 2 (+6 dB) |
| Input Configuration | Differential | Differential | Differential |
| Signal Category | Audio | Audio | Audio |
| Number of Pins | 14 pins | 14 pins | 14 pins |
| Mounting Type | Through-hole | Through-hole | Through-hole |
جیاکەرەوە سەرەکییەکان
- Supports both attenuation and modest signal amplification (بەراورد بەINA137PA)
- Combines two balanced receiver channels in one package (بەراورد بەINA2137P)
- Offers selectable gain instead of unity-only operation (بەراورد بەINA134)
تێبینییەکانی دیزاین
Place the INA2137 close to the balanced input connector and route each differential pair together to minimize the length of unbalanced segments. Keep the external input and feedback resistors near the associated channel pins, and provide a direct ground-return path that avoids switching-current regions. These layout choices preserve the common-mode rejection advantage of the differential input rather than allowing pickup to reappear after the signal leaves the connector.
Configure both channels for the same documented resistor arrangement and verify output polarity. The 1/2-gain network attenuates by 6 dB, while the gain-of-2 network adds 6 dB and therefore increases output-voltage demand. Check maximum input amplitude against output swing at the selected supply voltage. If the source is unbalanced, do not assume a single-ended signal is automatically compatible with the differential input arrangement.
Use the manufacturer’s supply wiring and decoupling guidance when populating the 14-pin PDIP. Keep supply and ground connections compact and place bypass capacitors close to the corresponding pins so switching and high-frequency current loops do not extend through the board. The documented supply options include 9 V, 12 V, 15 V, 18 V, 24 V, and 28 V, but the allowable input range, quiescent current, and power limits must be confirmed in the datasheet before selecting the rail.
Do not select the INA2137 family solely by the advertised gain value. The documented 1/2 and 2 configurations require the correct external resistor relationships, and changing those relationships reverses signal polarity. For a fixed unity-gain requirement, the manufacturer identifies the INA134 and INA2134 families as relevant options. For a replacement, verify pin functions, common-mode range, noise, bandwidth, output swing, and supply limits rather than relying on package shape alone.
زانیاری پابەندبوون
No explicit compliance declarations were identified in the referenced manufacturer and distributor information. Use the current manufacturer product page and material declarations for production qualification.