Lattice Semiconductor

LC4256B-5T176C - 156 MHz CPLD | Lattice Semiconductor

MPN: LC4256B-5T176C ✗ کۆتایی ژیان
3.3 V, 2.5 V, and 1.8 V Vdss LFQFP Package 156 MHz Speed
MOQ: 1 |

LC4256B-5T176C گشتی

Lattice Semiconductor LC4256B-5T176C is a high-density complex programmable logic device (CPLD) featuring a 156 MHz maximum clock frequency, in-system programmability, and support for 3.3 V, 2.5 V, and 1.8 V operation. The device is packaged in a square 176-terminal LFQFP package with gull-wing leads. Its SuperFAST architecture combines nonvolatile programmable logic with deterministic timing suitable for control logic, interface bridging, and system support functions.

A CPLD is a programmable logic device within the broader FPGA and programmable-logic category. Unlike a mask-programmed fixed-logic IC, a CPLD retains its configuration in nonvolatile memory and can be reprogrammed in the circuit. This makes it useful when control paths, protocol interfaces, or product configurations need to change during development or manufacturing. The LC4256B family provides a practical balance between logic density, predictable routing, and low-to-moderate clock rates.

The headline features of the LC4256B-5T176C include a 156 MHz maximum clock frequency, three listed operating-voltage options, and in-system programming. The 176-lead surface-mount package provides a large number of programmable I/O connections for systems that need to consolidate multiple fixed-function glue logic blocks. The -5 designation identifies a particular timing grade, while the commercial C suffix identifies the product grade represented by this exact orderable MPN.

The manufacturer describes the LC4256B as a SuperFAST high-density PLD. Its architecture is intended for designs requiring deterministic logic behavior, repeated in-system configuration, and a broad package-level I/O interface. Because this component is programmed through a dedicated configuration mechanism, engineers should treat its programming voltage, setup timing, and acquisition circuitry as core parts of the power and signal-integrity design rather than as optional programming details.

Typical uses include industrial control and automation, communication-interface consolidation, peripheral emulation, instrumentation, embedded support logic, and test equipment. The 176-terminal package is particularly appropriate for designs with many external control signals, parallel data buses, or multiple board-level interfaces. Systems requiring higher clock rates, greater logic density, or a different package should be assessed against other programmable-logic families rather than treated as automatic replacements.

PCB implementation should preserve the manufacturer-specified pin assignments, decoupling strategy, programming interface, and exposed thermal behavior of the LFQFP package. Because the exact symbol, power domains, and I/O standards must be checked against the current datasheet and design-tool library, board release should follow those definitions without substituting generic package conventions. The 156 MHz clock target also requires disciplined clock routing, return-path continuity, and validation of board-level timing.

This product page combines the verified 156 MHz operating point, package information, programming-voltage options, compatible Lattice variants, application guidance, and design notes. Those engineering details help evaluators determine whether the LC4256B-5T176C fits an existing PCB and what timing, programming, thermal, and signal-integrity checks remain before production release.

جێگرەوەکانی جێگۆڕکێ بۆ LC4256B-5T176C — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LC4256B-5T176C (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Architecture, Device Type, Temperature Grade.

Lattice Semiconductor
Architecture: Blend of ispLSI 2000 and ispMACH 4A architectures
Device Type: In-system-programmable CPLD
Temperature Grade: Industrial grade
بەراوردکردن لەگەڵ LC4256B-5T176C →

LC4256B-5T176I

✅ جێگرەوەی ڕاستەوخۆ
Lattice Semiconductor
📦 176-terminal LFQFP
In-system-programmable CPLD · ispMACH 4000B · 256 macrocells · 227 MHz · 5 ns · 2.5 V · 1.8 V, 2.5 V, 3.3 V · Blend of ispLSI 2000 and ispMACH 4A architectures

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LC4256B-5TN176I

✅ جێگرەوەی ڕاستەوخۆ
📦 176-terminal LFQFP
Same 176-terminal LFQFP and -5 timing designation with industrial I grade; package suffix differs while terminal count remains 176

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

LC4256B-3TN176C

✅ جێگرەوەی ڕاستەوخۆ
📦 176-terminal LFQFP
Same 176-terminal LFQFP and commercial C grade; -5 changes to the faster -3 timing designation, a 2 ns or 40% nominal timing-grade reduction

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

LC4256V-75TN176C

✅ جێگرەوەی ڕاستەوخۆ
📦 176-terminal LFQFP
Same 176-terminal LFQFP package and terminal count; the -75 timing designation replaces the target's -5 designation, requiring a 70 ns or 1400% nominal timing-grade difference

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

LC4256V-5T176C

✅ جێگرەوەی ڕاستەوخۆ
Lattice Semiconductor
📦 176-terminal LFQFP
Complex programmable logic device (CPLD) · ispMACH 4000V · 256 macrocells · 128 I/O pins · 5 ns · 3 V to 3.6 V · 3.3 V, 2.5 V, and 1.8 V · In-system programmable

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LC4256B-5T176C زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Device Type Complex Programmable Logic Device (CPLD)
Architecture SuperFAST high-density PLD
زۆرترین فرێکوێنسیی کاتژمێر 156 MHz
Supported Operating Voltages 3.3 V, 2.5 V, and 1.8 V
Programming Method In-system programmable
Programmable Logic Type Nonvolatile programmable logic
Package Code LFQFP
Package Shape Square
Terminal Count 176 terminals
Lead Style Gull wing
جۆری دامەزراندن Surface mount
Timing Grade -5 speed grade
Temperature Grade Commercial C grade
Supply Voltage Details 3.3 V, 2.5 V, or 1.8 V operation

ڕێنمایی ڕێکخستنی پینی LC4256B-5T176C square

ڕێکخستنی پین بۆ LC4256B-5T176C (پاکێجی square). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی square بۆ LC4256B-5T176C

هیچ داتای وردی پینئاوت بەردەست نییە بۆ LC4256B-5T176C.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

LC4256B-5T176C گونجاوە بۆ 6 بەکارھێنانs: Industrial Automation Control, Communication Interface Consolidation, Test and Measurement Instrumentation, Embedded Peripheral Emulation, Programmable Sensor Conditioning, Security and Access Control Logic.

🏭

Industrial Automation Control

The LC4256B-5T176C fits centralized machine-control logic where several discrete controllers must be replaced by one nonvolatile programmable-logic device. Its 156 MHz maximum clock frequency provides substantial headroom for sequencers, interlocks, and timing functions, while the 176-terminal LFQFP package exposes a large connection count for sensors, actuators, interlocks, and machine I/O. The in-system programming capability supports production configuration and controlled firmware-like updates. During implementation, partition critical motion or safety-related paths according to the manufacturer timing constraints and validate every external signal standard, since the commercial-grade temperature limit also determines where the device may be deployed.

🌐

Communication Interface Consolidation

The LC4256B-5T176C can consolidate protocol conversion, framing, byte alignment, and board-level control functions that otherwise occupy multiple fixed-function logic devices. A 156 MHz maximum clock frequency is appropriate for synchronous interface logic, and the 176-terminal package provides enough physical connections for parallel data buses, control signals, and programmable I/O. Designers should use the manufacturer pin and timing definitions to establish clock domains and pin constraints. In-system programming allows a single PCB to support multiple protocol configurations, provided the programming interface, pull states, and isolation methods meet the device's security and update requirements.

🔧

Test and Measurement Instrumentation

The LC4256B-5T176C is suitable for instrument-control logic that coordinates trigger sequencing, status decoding, data capture, and front-panel or rear-panel interfaces. Its 156 MHz maximum clock frequency supports synchronous control paths, while its nonvolatile in-system programmability enables different test configurations without redesigning the PCB. The 176-terminal LFQFP package is useful when the instrument exposes many control lines or requires dense I/O routing. Engineers should constrain all acquisition and timing paths through the design tool, preserve clock integrity, and validate output loading and external interface thresholds before treating the programmed system as production-ready.

🖥️

Embedded Peripheral Emulation

The LC4256B-5T176C can implement legacy peripheral interfaces, bus arbiters, interrupt controllers, and programmable glue logic around a larger processor system. Its 156 MHz maximum clock frequency is suitable for synchronous interface control, and in-system programming permits the emulation logic to be updated when firmware changes. The 176-lead package also makes the device practical where numerous chip-select, interrupt, data, and control signals must be consolidated. The implementation should reserve configuration pins correctly, use the specified programming voltage, and include deliberate isolation between operating and update modes to prevent bus contention during upgrades.

🧩

Programmable Sensor Conditioning

The LC4256B-5T176C can coordinate sensor selection, multiplexing, timing, calibration tables, and threshold logic in a programmable acquisition front end. A 156 MHz maximum clock rating supports deterministic digital sequencing, while the 176-terminal package provides connections for multiple sensor channels and associated control signals. In-system programming is valuable when sensor populations or calibration procedures vary across product variants. Designers should separate sensitive analog signal paths from programming and clock routing, apply the manufacturer's I/O constraints, and verify timing margins under the full sensor-rate and multiplexing workload rather than only at nominal clock frequency.

🎥

Security and Access Control Logic

The LC4256B-5T176C is applicable in access-control and security equipment that combines event sequencing, alarm logic, credential-interface decoding, and communication control. Its nonvolatile configuration permits deployment-specific programming, and the 156 MHz maximum clock frequency accommodates synchronous control functions. The 176-terminal LFQFP package offers a broad interface for readers, indicators, locks, network links, and supervisory signals. Because security depends on configuration protection as well as logical behavior, the design should implement the manufacturer's recommended programming disable or isolation method, control physical access to the configuration interface, and avoid exposing sensitive logic through unconstrained diagnostic outputs.

کورتەی بەرهەمە پێشنیارکراوەکان

LC4256B-5T176I Lattice Semiconductor بەکارهێنراوە لە: Industrial Automation Control, Test and Measurement Instrumentation, Embedded Peripheral Emulation, Security and Access Control Logic LC4256B-3TN176C Faster timing-grade option for additional path margin بەکارهێنراوە لە: Industrial Automation Control, Test and Measurement Instrumentation, Programmable Sensor Conditioning LC4256V-5T176C Related 176-terminal LFQFP programmable-logic option بەکارهێنراوە لە: Communication Interface Consolidation, Security and Access Control Logic LC4256B-5TN176I Industrial-grade related configuration in the same package family بەکارهێنراوە لە: Communication Interface Consolidation, Programmable Sensor Conditioning LC4256V-75TN176C Related 176-terminal option for lower-speed design paths بەکارهێنراوە لە: Embedded Peripheral Emulation
What is LC4256B-5T176C?
The LC4256B-5T176C is a Lattice Semiconductor high-density CPLD with a 156 MHz maximum clock frequency, in-system programming, and support for 3.3 V, 2.5 V, and 1.8 V operation. According to the Lattice Semiconductor manufacturer datasheet, it belongs to the SuperFAST programmable-logic family and is supplied in a square 176-terminal LFQFP package. It is intended for deterministic control logic, interface consolidation, and programmable system-support functions.
What is the operating voltage of LC4256B-5T176C?
The LC4256B-5T176C supports 3.3 V, 2.5 V, and 1.8 V operation. According to the Lattice Semiconductor manufacturer datasheet, the applicable supply voltage must be selected according to the bank and interface requirements of the design. Each board should also verify that its external buffers, programming interface, and connected devices use levels compatible with the configured core and I/O supplies.
What is the maximum clock frequency of LC4256B-5T176C?
The maximum clock frequency of the LC4256B-5T176C is 156 MHz. According to the Lattice Semiconductor manufacturer datasheet and the product listing, this value represents the device family's stated operating point. Actual system timing can be lower after accounting for external clock jitter, routing delay, input constraints, output loading, and the timing requirements of the selected design.
Where can I download the LC4256B-5T176C datasheet PDF?
The LC4256B-5T176C manufacturer datasheet PDF can be reached through the Lattice Semiconductor document linked on this page or through the indexed datasheet page. The document defines the device architecture, 176-terminal pinout, programming information, electrical characteristics, and timing tables. Use the current manufacturer document for design release because package symbols, bank assignments, and programming guidance must match the exact revision used by the development toolchain.
Where can I find the LC4256B-5T176C pinout?
The LC4256B-5T176C pinout is defined in the Lattice Semiconductor manufacturer datasheet for the 176-terminal LFQFP package. Use the pin-description table and package drawing when assigning PCB nets, especially for supply, ground, configuration, clock, and user I/O pins. The 176-lead package is a gull-wing square LFQFP, and its footprint should be checked against the manufacturer drawing rather than inferred from a generic QFP symbol.
Is LC4256B-5T176C suitable for industrial control and automation?
The LC4256B-5T176C can suit industrial control and automation designs that require nonvolatile programmable logic, deterministic control paths, and a 156 MHz maximum clock frequency. Its 176 I/O-bearing package also supports systems consolidating many discrete control functions. For an industrial deployment, confirm the commercial-grade temperature limits, isolation strategy, EMC requirements, and long-term availability against the current Lattice Semiconductor lifecycle and reliability documentation.
Can LC4256B-5T176C be programmed after installation on the PCB?
Yes, the LC4256B-5T176C supports in-system programming. According to the Lattice Semiconductor manufacturer datasheet, configuration can be performed while the device is mounted on the circuit board, allowing programming, testing, and field updates without removing the package. The implementation must preserve the specified configuration pins, voltage levels, timing, pull devices, and isolation requirements for production security and update reliability.
What is the difference between LC4256B-5T176C and LC4256B-5T176I?
The principal difference is the product-grade suffix: LC4256B-5T176C carries the commercial C grade, while LC4256B-5T176I carries the industrial I grade. Both appear in the same 176-terminal LFQFP family and share the -5 timing designation. Their maximum clock figures are not stated in the product listings, so the exact frequency and temperature limits must be compared in the manufacturer datasheets before substitution.
LC4256B-5T176C vs LC4256B-3TN176C - which is better for timing-critical logic?
LC4256B-5T176C and LC4256B-3TN176C belong to the same LC4256B family but use different speed-grade designations. The -3 designation conventionally represents the faster timing grade than -5, so LC4256B-3TN176C may better satisfy a path requiring more timing margin. Confirm the maximum operating frequency, I/O constraints, package drawing, and qualification details in the manufacturer datasheets before selecting either device.
When should I choose LC4256B-5T176C over a faster LC4256B grade?
Choose LC4256B-5T176C when its documented 156 MHz maximum clock frequency provides sufficient timing margin and the required functions fit the device's logic and I/O resources. A faster grade is preferable only when path timing cannot close at the -5 speed grade. Also compare commercial versus industrial temperature qualification, availability, and programming support rather than selecting solely from the timing suffix.
What can replace LC4256B-5T176C?
The closest listed replacements are LC4256B-5T176I, LC4256B-5TN176I, LC4256B-3TN176C, LC4256V-75TN176C, and LC4256V-5T176C because they retain the 176-lead LFQFP form factor and appear in direct comparison records. Verify pin-to-pin compatibility, timing grade, logic density, I/O standards, temperature range, and programming method in the manufacturer documentation. Device markings or package dimensions alone do not establish functional interchangeability.
Is LC4256B-5T176C the same as LC4256B-5T176I?
No, LC4256B-5T176C and LC4256B-5T176I are related 176-lead LC4256B devices with different grade suffixes, but they are not identical in operating temperature class. The C version is commercial grade and the I version is industrial grade. A PCB-level substitution may be practical when the required temperature range and every electrical parameter match, subject to confirmation in the manufacturer datasheets.
What is the best Lattice Semiconductor equivalent for LC4256B-5T176C?
The best direct Lattice candidate is LC4256B-5T176I because it retains the same family, -5 speed designation, and 176-terminal package while changing the product grade from commercial to industrial. Other listed alternatives include LC4256B-5TN176I, LC4256B-3TN176C, LC4256V-75TN176C, and LC4256V-5T176C. The final choice depends on timing, temperature, logic resources, I/O electrical limits, and verified pin compatibility.
Where can I buy LC4256B-5T176C online?
Use the Request a Quote form on this page to request LC4256B-5T176C pricing, stock, minimum order quantity, and lead time. The form routes the request through XAIPART and allows the exact MPN and required package quantity to be confirmed. Because programming, temperature grade, and lifecycle constraints can affect supply, state the required quantity and target date in the request rather than relying on an unverified stock count.
What is the price and lead time of LC4256B-5T176C?
The Request a Quote form on this page is the authoritative route for current LC4256B-5T176C price, stock, minimum order quantity, and lead time. Request the exact MPN, quantity, and shipment destination. The part is a programmable-logic device with package and lifecycle considerations, so a quotation response should also confirm whether the requested configuration remains available and suitable for the intended production cycle.
Is LC4256B-5T176C in stock?
Current LC4256B-5T176C stock should be confirmed through the Request a Quote form on this page. Include the exact MPN, required quantity, target delivery date, and any acceptable date-code or traceability requirements. Because the device is an older high-density CPLD in a 176-terminal LFQFP package, availability may depend on scheduled supply rather than continuous distributor inventory.

داتای سەرچاوەی ئەندازیاری بۆ LC4256B-5T176C — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose LC4256B-5T176C for a commercial-grade, 176-terminal LFQFP design whose paths close at the -5 timing grade and require no more than its 156 MHz maximum clock frequency. Select LC4256B-5T176I when the same package and speed grade are needed for an industrial temperature class. Consider LC4256B-3TN176C when additional timing margin is valuable and the design has been revalidated for the faster -3 grade. Use LC4256B-5TN176I as another related same-package configuration with an industrial suffix. LC4256V-75TN176C and LC4256V-5T176C can be considered only after their resources, timing, programming method, and pin tables have been matched. For every option, verify the exact 176-lead footprint, supply arrangement, configuration pins, I/O standards, temperature limits, and lifecycle status before releasing a production PCB.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە LC4256B-5T176I LC4256B-5TN176I LC4256B-3TN176C LC4256V-75TN176C LC4256V-5T176C
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package 176-terminal LFQFP 176-terminal LFQFP 176-terminal LFQFP 176-terminal LFQFP 176-terminal LFQFP 176-terminal LFQFP
Device Type High-density CPLD High-density CPLD High-density CPLD High-density CPLD LC4256V programmable logic LC4256V programmable logic
Timing Designation -5 -5 -5 -3 -75 -5
Terminal Count 176 terminals 176 terminals 176 terminals 176 terminals 176 terminals 176 terminals

جیاکەرەوە سەرەکییەکان

  • Commercial-grade device with the same -5 timing designation as the industrial alternative (بەراورد بەLC4256B-5T176I)
  • Faster -3 timing option for paths requiring additional margin (بەراورد بەLC4256B-3TN176C)
  • Same-package configuration across LC4256B and LC4256V families (بەراورد بەLC4256V-5T176C)

تێبینییەکانی دیزاین

Use the manufacturer's 176-terminal LFQFP land pattern and pin-description table for PCB release. A 176-lead gull-wing package requires dense routing between inner signal rows and outward fanout, so verify pad dimensions, solder-mask clearance, paste volume, and courtyard space against the current package drawing. Treat configuration pins, supply pins, and ground pins as assigned nets rather than interchangeable general-purpose I/O, and preserve the exposed underside geometry recommended for assembly and thermal performance.

Route clocks as controlled-impedance nets with continuous reference planes and avoid splits or unnecessary stubs. The device's stated 156 MHz maximum clock frequency is a device rating, not a guarantee that every board route will close timing at that rate. Add pin constraints for input delays, output loads, and external clock uncertainty in the design tool. Pay particular attention to shared supply pins, configuration activity, and simultaneous-switching outputs because they can degrade margin even when logic timing appears to close.

Implement the manufacturer-specified core and I/O supply connections with local high-frequency decoupling and adequate bulk capacitance at the board's supply entry points. The LC4256B supports 3.3 V, 2.5 V, and 1.8 V operation, but a mixed-voltage design can require level translation and careful sequencing. Confirm whether configuration is performed at a specific supply condition and isolate the programming interface when it is not required, preventing powered external circuitry from back-feeding or contending with the device.

Do not treat the commercial C suffix, timing suffix, or package suffix as interchangeable without checking the complete ordering code. A similarly named device can use the same 176-terminal LFQFP outline while differing in temperature class, speed grade, resource count, or I/O behavior. Before approving a substitution, compare the manufacturer pin tables, programming requirements, timing constraints, supply limits, and PCB footprint. Also verify availability and lifecycle status for the exact suffix rather than for the broader LC4256B or LC4256V family.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The indexed comparison content references RoHS and REACH for related devices, but no explicit compliance declaration for the exact LC4256B-5T176C is present. AEC-Q100 is not applicable to this commercial-grade CPLD.

داتا پشتڕاستکراوەتەوە لە: 2026-11-19 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

LC4256B-5T176C datasheet LC4256B-5T176C datasheet pdf LC4256B-5T176C pinout LC4256B-5T176C pinout 176 LFQFP LC4256B-5T176C equivalent LC4256B-5T176C replacement LC4256B-5T176C cross reference LC4256B-5T176C price LC4256B-5T176C stock LC4256B-5T176C vs LC4256B-5T176I Lattice LC4256B-5T176C LC4256B-5T176C 156 MHz CPLD LC4256B-5T176C application circuit LC4256B-5T176C footprint

پێکهاتە و زاراوە پەیوەندیدارەکان

Lattice Semiconductor LC4256B-5T176C LC4256B-5T176I LC4256B-5TN176I LC4256B-3TN176C LC4256V-75TN176C LC4256V-5T176C CPLD Complex Programmable Logic Device FPGA Programmable Logic Device SuperFAST architecture In-system programming Nonvolatile programmable logic 156 MHz maximum clock frequency LFQFP-176 Gull-wing lead package Surface-mount package 3.3 V operation 2.5 V operation 1.8 V operation Industrial control Communication interface Signal integrity
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ