LC4256B-5T176C - 156 MHz CPLD | Lattice Semiconductor
MPN: LC4256B-5T176C ✗ Cuối đờiLC4256B-5T176C Tóm tắt
A CPLD is a programmable logic device within the broader FPGA and programmable-logic category. Unlike a mask-programmed fixed-logic IC, a CPLD retains its configuration in nonvolatile memory and can be reprogrammed in the circuit. This makes it useful when control paths, protocol interfaces, or product configurations need to change during development or manufacturing. The LC4256B family provides a practical balance between logic density, predictable routing, and low-to-moderate clock rates.
The headline features of the LC4256B-5T176C include a 156 MHz maximum clock frequency, three listed operating-voltage options, and in-system programming. The 176-lead surface-mount package provides a large number of programmable I/O connections for systems that need to consolidate multiple fixed-function glue logic blocks. The -5 designation identifies a particular timing grade, while the commercial C suffix identifies the product grade represented by this exact orderable MPN.
The manufacturer describes the LC4256B as a SuperFAST high-density PLD. Its architecture is intended for designs requiring deterministic logic behavior, repeated in-system configuration, and a broad package-level I/O interface. Because this component is programmed through a dedicated configuration mechanism, engineers should treat its programming voltage, setup timing, and acquisition circuitry as core parts of the power and signal-integrity design rather than as optional programming details.
Typical uses include industrial control and automation, communication-interface consolidation, peripheral emulation, instrumentation, embedded support logic, and test equipment. The 176-terminal package is particularly appropriate for designs with many external control signals, parallel data buses, or multiple board-level interfaces. Systems requiring higher clock rates, greater logic density, or a different package should be assessed against other programmable-logic families rather than treated as automatic replacements.
PCB implementation should preserve the manufacturer-specified pin assignments, decoupling strategy, programming interface, and exposed thermal behavior of the LFQFP package. Because the exact symbol, power domains, and I/O standards must be checked against the current datasheet and design-tool library, board release should follow those definitions without substituting generic package conventions. The 156 MHz clock target also requires disciplined clock routing, return-path continuity, and validation of board-level timing.
This product page combines the verified 156 MHz operating point, package information, programming-voltage options, compatible Lattice variants, application guidance, and design notes. Those engineering details help evaluators determine whether the LC4256B-5T176C fits an existing PCB and what timing, programming, thermal, and signal-integrity checks remain before production release.
Bộ thay thế dễ dàng lắp đặt cho LC4256B-5T176C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LC4256B-5T176C (cùng hình factor và footprint) — khác nhau ở Architecture, Device Type, Temperature Grade.
LC4256B-5T176I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LC4256B-5TN176I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LC4256B-3TN176C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LC4256V-75TN176C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LC4256V-5T176C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LC4256B-5T176C Tỷ lệ tối đa & tính chất điện
| Device Type | Complex Programmable Logic Device (CPLD) |
| Architecture | SuperFAST high-density PLD |
| Tần số xung maksimum | 156 MHz |
| Supported Operating Voltages | 3.3 V, 2.5 V, and 1.8 V |
| Programming Method | In-system programmable |
| Programmable Logic Type | Nonvolatile programmable logic |
| Package Code | LFQFP |
| Package Shape | Square |
| Terminal Count | 176 terminals |
| Lead Style | Gull wing |
| Kiểu lắp đặt | Surface mount |
| Timing Grade | -5 speed grade |
| Temperature Grade | Commercial C grade |
| Supply Voltage Details | 3.3 V, 2.5 V, or 1.8 V operation |
Hướng dẫn cấu hình chân LC4256B-5T176C square
Cấu hình chân cho LC4256B-5T176C (square gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho LC4256B-5T176C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LC4256B-5T176C phù hợp cho 6 Áp dụngs: Industrial Automation Control, Communication Interface Consolidation, Test and Measurement Instrumentation, Embedded Peripheral Emulation, Programmable Sensor Conditioning, Security and Access Control Logic.
Industrial Automation Control
The LC4256B-5T176C fits centralized machine-control logic where several discrete controllers must be replaced by one nonvolatile programmable-logic device. Its 156 MHz maximum clock frequency provides substantial headroom for sequencers, interlocks, and timing functions, while the 176-terminal LFQFP package exposes a large connection count for sensors, actuators, interlocks, and machine I/O. The in-system programming capability supports production configuration and controlled firmware-like updates. During implementation, partition critical motion or safety-related paths according to the manufacturer timing constraints and validate every external signal standard, since the commercial-grade temperature limit also determines where the device may be deployed.
Được đề xuất
Communication Interface Consolidation
The LC4256B-5T176C can consolidate protocol conversion, framing, byte alignment, and board-level control functions that otherwise occupy multiple fixed-function logic devices. A 156 MHz maximum clock frequency is appropriate for synchronous interface logic, and the 176-terminal package provides enough physical connections for parallel data buses, control signals, and programmable I/O. Designers should use the manufacturer pin and timing definitions to establish clock domains and pin constraints. In-system programming allows a single PCB to support multiple protocol configurations, provided the programming interface, pull states, and isolation methods meet the device's security and update requirements.
Được đề xuất
Test and Measurement Instrumentation
The LC4256B-5T176C is suitable for instrument-control logic that coordinates trigger sequencing, status decoding, data capture, and front-panel or rear-panel interfaces. Its 156 MHz maximum clock frequency supports synchronous control paths, while its nonvolatile in-system programmability enables different test configurations without redesigning the PCB. The 176-terminal LFQFP package is useful when the instrument exposes many control lines or requires dense I/O routing. Engineers should constrain all acquisition and timing paths through the design tool, preserve clock integrity, and validate output loading and external interface thresholds before treating the programmed system as production-ready.
Được đề xuất
Embedded Peripheral Emulation
The LC4256B-5T176C can implement legacy peripheral interfaces, bus arbiters, interrupt controllers, and programmable glue logic around a larger processor system. Its 156 MHz maximum clock frequency is suitable for synchronous interface control, and in-system programming permits the emulation logic to be updated when firmware changes. The 176-lead package also makes the device practical where numerous chip-select, interrupt, data, and control signals must be consolidated. The implementation should reserve configuration pins correctly, use the specified programming voltage, and include deliberate isolation between operating and update modes to prevent bus contention during upgrades.
Được đề xuất
Programmable Sensor Conditioning
The LC4256B-5T176C can coordinate sensor selection, multiplexing, timing, calibration tables, and threshold logic in a programmable acquisition front end. A 156 MHz maximum clock rating supports deterministic digital sequencing, while the 176-terminal package provides connections for multiple sensor channels and associated control signals. In-system programming is valuable when sensor populations or calibration procedures vary across product variants. Designers should separate sensitive analog signal paths from programming and clock routing, apply the manufacturer's I/O constraints, and verify timing margins under the full sensor-rate and multiplexing workload rather than only at nominal clock frequency.
Được đề xuất
Security and Access Control Logic
The LC4256B-5T176C is applicable in access-control and security equipment that combines event sequencing, alarm logic, credential-interface decoding, and communication control. Its nonvolatile configuration permits deployment-specific programming, and the 156 MHz maximum clock frequency accommodates synchronous control functions. The 176-terminal LFQFP package offers a broad interface for readers, indicators, locks, network links, and supervisory signals. Because security depends on configuration protection as well as logical behavior, the design should implement the manufacturer's recommended programming disable or isolation method, control physical access to the configuration interface, and avoid exposing sensitive logic through unconstrained diagnostic outputs.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LC4256B-5T176C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LC4256B-5T176I | LC4256B-5TN176I | LC4256B-3TN176C | LC4256V-75TN176C | LC4256V-5T176C |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 176-terminal LFQFP | 176-terminal LFQFP | 176-terminal LFQFP | 176-terminal LFQFP | 176-terminal LFQFP | 176-terminal LFQFP |
| Device Type | High-density CPLD | High-density CPLD | High-density CPLD | High-density CPLD | LC4256V programmable logic | LC4256V programmable logic |
| Timing Designation | -5 | -5 | -5 | -3 | -75 | -5 |
| Terminal Count | 176 terminals | 176 terminals | 176 terminals | 176 terminals | 176 terminals | 176 terminals |
Bảo phân biệt quan trọng
- Commercial-grade device with the same -5 timing designation as the industrial alternative (vsLC4256B-5T176I)
- Faster -3 timing option for paths requiring additional margin (vsLC4256B-3TN176C)
- Same-package configuration across LC4256B and LC4256V families (vsLC4256V-5T176C)
Ghi chú thiết kế
Use the manufacturer's 176-terminal LFQFP land pattern and pin-description table for PCB release. A 176-lead gull-wing package requires dense routing between inner signal rows and outward fanout, so verify pad dimensions, solder-mask clearance, paste volume, and courtyard space against the current package drawing. Treat configuration pins, supply pins, and ground pins as assigned nets rather than interchangeable general-purpose I/O, and preserve the exposed underside geometry recommended for assembly and thermal performance.
Route clocks as controlled-impedance nets with continuous reference planes and avoid splits or unnecessary stubs. The device's stated 156 MHz maximum clock frequency is a device rating, not a guarantee that every board route will close timing at that rate. Add pin constraints for input delays, output loads, and external clock uncertainty in the design tool. Pay particular attention to shared supply pins, configuration activity, and simultaneous-switching outputs because they can degrade margin even when logic timing appears to close.
Implement the manufacturer-specified core and I/O supply connections with local high-frequency decoupling and adequate bulk capacitance at the board's supply entry points. The LC4256B supports 3.3 V, 2.5 V, and 1.8 V operation, but a mixed-voltage design can require level translation and careful sequencing. Confirm whether configuration is performed at a specific supply condition and isolate the programming interface when it is not required, preventing powered external circuitry from back-feeding or contending with the device.
Do not treat the commercial C suffix, timing suffix, or package suffix as interchangeable without checking the complete ordering code. A similarly named device can use the same 176-terminal LFQFP outline while differing in temperature class, speed grade, resource count, or I/O behavior. Before approving a substitution, compare the manufacturer pin tables, programming requirements, timing constraints, supply limits, and PCB footprint. Also verify availability and lifecycle status for the exact suffix rather than for the broader LC4256B or LC4256V family.
Thông tin tuân thủ
The indexed comparison content references RoHS and REACH for related devices, but no explicit compliance declaration for the exact LC4256B-5T176C is present. AEC-Q100 is not applicable to this commercial-grade CPLD.