LC4256B-5T176I - 256-Macrocell 176-LQFP CPLD | Lattice
MPN: LC4256B-5T176I ✗ کۆتایی ژیانLC4256B-5T176I گشتی
A complex programmable logic device, or CPLD, is a user-programmable semiconductor that integrates configurable logic blocks, programmable interconnect, and I/O resources into one package. Its hierarchy extends from programmable logic devices to CPLDs and then to broader integrated-circuit categories. Unlike a mask-programmable logic device, a CPLD can be configured after manufacture, making it practical for design revisions, prototypes, production programming, and field-manufactured control systems.
The LC4256B-5T176I provides 256 macrocells, approximately 227 MHz operation, and a 5 ns maximum propagation delay. Its in-system programming capability allows configuration data to be loaded into the device through its programming interface, supporting efficient production programming and design flexibility. The industrial-temperature suffix identifies the grade intended for operation across an extended commercial temperature range.
The -5 speed designation corresponds to the 5 ns maximum-delay performance grade identified for this part. This places the device between faster and slower members of the LC4256B family while retaining the same 176-pin implementation. The result is a useful balance between logic performance, I/O availability, and design complexity for systems that do not require the maximum speed of the fastest family member.
Typical uses include industrial control and factory automation, communications interfaces, test and measurement equipment, embedded system control, and general-purpose glue logic. The 176-pin LQFP package provides a substantial number of external connections compared with smaller CPLD packages, making it suitable when a design requires more I/O than compact devices can offer.
PCB design should preserve the manufacturer's recommended power, ground, configuration, and I/O layout. Decoupling capacitors should be placed close to the supply pins, and unused inputs must be handled according to the manufacturer guidance to avoid unpredictable switching behavior. Programming-interface signals should remain accessible if in-system reconfiguration is required.
This product page organizes the verified device identity, package details, family alternatives, comparison parameters, sourcing path, and design considerations into one engineering reference. It also distinguishes confirmed specifications from parameters that should be checked directly in the manufacturer datasheet before schematic release or PCB layout approval.
جێگرەوەکانی جێگۆڕکێ بۆ LC4256B-5T176I — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LC4256B-5T176I (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Architecture, Device Type, Temperature Grade.
LC4256B-5TN176I
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LC4256B-5T176C
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LC4256B-3TN176C
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LC4256B-3T176I
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LC4256B-75T176C
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LC4256B-5T176I زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | In-system-programmable CPLD |
| Product Family | ispMACH 4000B |
| Macrocell Count | 256 macrocells |
| Maximum Frequency | 227 MHz |
| Maximum Propagation Delay | 5 ns |
| Core Supply Voltage | 2.5 V |
| Supported Supply Voltages in Product Family | 1.8 V, 2.5 V, 3.3 V |
| Architecture | Blend of ispLSI 2000 and ispMACH 4A architectures |
| Programming Type | In-system programmable |
| پاکێج | 176-pin LQFP |
| ژمارەی پین | 176 pins |
| جۆری دامەزراندن | Surface mount |
| Temperature Grade | Industrial grade |
ڕێنمایی ڕێکخستنی پینی LC4256B-5T176I 176-pin lqfp
ڕێکخستنی پین بۆ LC4256B-5T176I (پاکێجی 176-pin lqfp). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LC4256B-5T176I.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LC4256B-5T176I گونجاوە بۆ 6 بەکارھێنانs: Industrial Automation Control, Factory Automation Interfaces, Communications Interface Consolidation, Test and Measurement Equipment, Embedded System Glue Logic, LED and Display Control.
Industrial Automation Control
The LC4256B-5T176I fits industrial automation controllers that combine sequential logic, interface decoding, and multiple external signals in one programmable device. Its 256 macrocells provide substantially more logic capacity than a small CPLD, while the 176-pin LQFP supports a broad connection count for encoders, sensors, actuators, and communications interfaces. The 5 ns maximum delay supports timing designs operating up to the listed 227 MHz. For industrial equipment, confirm the operating-temperature limits, isolate noisy power and motor paths, and validate every input and output assignment against the manufacturer pinout before releasing the PCB layout.
پێشنیارکراو
Factory Automation Interfaces
The LC4256B-5T176I is suitable for factory-automation interface logic where programmable timing and extensive I/O are more important than a very large FPGA fabric. It can implement protocol conversion, handshake control, pulse qualification, and machine-state logic while operating from a 2.5 V core class. The 176-pin package allows designers to reserve separate connections for differential or high-speed pairs, isolated interface boundaries, and diagnostic signals. Its in-system programming capability also permits production configuration and controlled field updates when the surrounding system supports the required programming interface and power-management sequence.
پێشنیارکراو
Communications Interface Consolidation
The LC4256B-5T176I can consolidate communications-interface glue logic that would otherwise occupy multiple small programmable devices. Its 256 macrocells and 176 available package connections are useful for framing control, FIFO-adjacent sequencing, status registers, and programmable I/O buffering. The listed 227 MHz maximum operating frequency and 5 ns maximum delay provide timing capability for many control-oriented interfaces, although actual signal-integrity limits depend on the I/O standard, board topology, and output loading. Validate edge rates, impedance, grounding, and any external transceiver requirements in the final signal-integrity analysis.
پێشنیارکراو
Test and Measurement Equipment
The LC4256B-5T176I fits test and measurement instruments that require coordinated control logic, instrument-bus decoding, trigger sequencing, and front-panel functions. The large 176-pin package provides enough connectivity to separate measurement inputs, calibration controls, status indicators, and communications links, while 256 macrocells support nontrivial control architectures. The in-system-programmable configuration supports repeatable production loading and engineering revisions. For precision analog and measurement circuitry, keep digital switching away sensitive nodes, use suitable isolation or shielding, and treat the CPLD as a digital controller rather than a substitute for precision analog front ends.
پێشنیارکراو
Embedded System Glue Logic
The LC4256B-5T176I is useful as programmable glue logic around a processor or FPGA when several custom timing, decode, and control functions must be consolidated. It can generate enables, arbitrate requests, translate interface formats, or implement legacy timing in parallel with the primary controller. The 176-pin LQFP accommodates both the primary logic and dedicated control pins, while the 5 ns delay grade provides margin for many synchronous control paths. The system designer must still define boot-state behavior, programming access, reset requirements, and fail-safe outputs so that the logic remains predictable before configuration or after a configuration fault.
پێشنیارکراو
LED and Display Control
The LC4256B-5T176I can manage display scanning, LED multiplexing, button decoding, and animation sequencing in control-oriented systems. Its 256 macrocells allow multiple display banks and refresh counters to coexist with system-control logic, while the 176-pin package provides a high connection count for display segments, enable lines, and controls. The listed 227 MHz operation is generally more than sufficient for common multiplexed LED matrices, but the designer should size timing from segment count, refresh target, and driver propagation delay. Use constant-current LED drivers where appropriate and account for display-current limits and grounding in the power-distribution design.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LC4256B-5T176I — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LC4256B-5TN176I | LC4256B-5T176C | LC4256B-3TN176C | LC4256B-3T176I |
|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | TQFP-176 (LQFP-176) | TQFP-176 (LQFP-176) | TQFP-176 (LQFP-176) | TQFP-176 (LQFP-176) | TQFP-176 (LQFP-176) |
| Product Family | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B |
| Macrocell Count | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells |
| Maximum Propagation Delay | 5 ns | 5 ns | 5 ns | 3 ns | 3 ns |
| Temperature Grade | Industrial grade | Industrial grade | Commercial grade | Commercial grade | Industrial grade |
| Programming Type | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
جیاکەرەوە سەرەکییەکان
- Closest ordering variant retains the same speed and interface (بەراورد بەLC4256B-5TN176I)
- Faster speed grade is available in the same package (بەراورد بەLC4256B-3T176I)
- Industrial temperature grade distinguishes the target from the commercial variant (بەراورد بەLC4256B-5T176C)
تێبینییەکانی دیزاین
Use the 176-pin LQFP land pattern from the Lattice Semiconductor package drawing and preserve its pin-one orientation. Place supply bypass capacitors next to the relevant power pins, maintain short return paths to the ground plane, and keep configuration traces away from sensitive external inputs. Because this obsolete part may be procured from legacy inventory, inspect lead coplanarity, solderability, pin condition, and marking before approving a new PCB assembly.
Do not select a replacement using package and macrocell count alone. Confirm the operating voltage, configuration interface, timing grade, temperature suffix, and every user-pin function. The -3 grade offers a 2 ns shorter nominal maximum delay than the -5 target, while commercial-grade suffixes may not be acceptable for industrial environments. Re-run timing analysis after substitution because a faster grade can change hold-time margin and board-level behavior.
Follow the manufacturer-recommended supply tolerances, decoupling values, and power-up sequencing for the selected configuration. Verify the behavior of configuration pins and I/O states during reset and startup so that outputs do not enter an unsafe state. If multiple legacy inventory lots may be combined, verify that each lot has the same revision, speed grade, temperature grade, and programming specification before consolidation.
Treat the 176-pin package as capable of supporting many interfaces, but evaluate each signal individually for I/O standard, edge rate, loading, and board routing. Avoid routing sensitive clocks or analog-related control signals adjacent to switching outputs and high-current digital nets. Use the manufacturer's timing and I/O guidance for setup, hold, clock, and output-loading assumptions rather than treating the 227 MHz figure as a guaranteed signal rate for every I/O.
زانیاری پابەندبوون
No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code. The device is an industrial-grade programmable-logic IC rather than an automotive-qualified component.