STMicroelectronics

LM258WYST - Dual 30V Automotive Op Amp, 1.1MHz | STMicroelectronics

MPN: LM258WYST ✓ چالاک
30 V Vdss 20 nA typical Id 100 Mohm typical Rds(on) MiniSO-8 / 8-TSSOP, 0.65 mm pitch, 3.0 mm width Package
MOQ: 1 |

LM258WYST گشتی

The STMicroelectronics LM258WYST is a dual general-purpose operational amplifier providing two independent, internally frequency-compensated amplifiers with a 1.1 MHz gain-bandwidth product and a 30 V maximum supply rating, supplied in the 8-pin MiniSO-8 (8-TSSOP) surface-mount package. Each channel offers millivolt-level input offset voltage, high input impedance and rail-to-rail output swing, making it the automotive-grade member of the ST LM258/LM2904/LM358 amplifier family.

A dual operational amplifier is a pair of independent voltage amplifiers on a single die, each with high open-loop gain, differential inputs and a single-ended output. Because both channels share one die and one package, a designer can build differential, summing or instrumentation stages with closely matched characteristics. In the analog signal chain the op amp sits below the application level and above the passive level: it conditions, buffers and amplifies signals coming from sensors, resistive dividers and transducers. The LM258WYST is characterized for operation from a single supply across a wide voltage range, which is why it is used on 12 V and 24 V automotive and industrial rails where a 5 V-only part cannot operate.

Key specifications include a 1.1 MHz gain-bandwidth product, a slew rate of 0.3 V/us, typical input offset voltage of 2 mV, input bias current of 20 nA and a quiescent supply current of roughly 0.7 mA per amplifier. The 30 V supply ceiling allows direct connection to 24 V industrial buses with headroom for transients, while the internally compensated architecture removes the need for external compensation capacitors. The MiniSO-8 package with 0.65 mm lead pitch places two amplifiers in a footprint smaller than one SOIC-8 package.

The internal design is a classic bipolar single-supply amplifier: a differential input pair drives a Darlington output stage that can source and sink output current, while the compensation network is integrated on chip so the amplifiers are unity-gain stable. Closed-loop behaviour is therefore set by the external feedback network, and the same part can be used as a voltage follower, an inverting or non-inverting gain stage, or a transimpedance amplifier. Common-mode and supply rejection in the 90 dB to 100 dB range keep the stage well behaved on noisy battery rails, and the 3 V to 30 V supply span allows the same board design to work from an auxiliary 5 V rail up to a 24 V bus.

Typical uses include 12 V automotive sensor signal conditioning, 24 V industrial control loops, current-loop receivers and buffered instrumentation inputs. The dual-channel configuration also suits differential sensing, where two amplifiers amplify the plus and minus sides of a bridge sensor, and threshold-style signal conditioning with pull-up resistors on the outputs.

Leave roughly 1.5 V of output headroom at the 30 V operating limit, and place a 100 nF bypass capacitor at the supply pin. Keep feedback resistors close to the amplifier pins, since parasitic capacitance in the feedback loop reduces stability at high closed-loop gain.

This page consolidates distributor availability, drop-in alternatives that share the same MiniSO-8 footprint, and practical design guidance for the LM258WYST. The comparison table, thermal and layout notes and selection guidance are intended to shorten bring-up time for engineers who need a dual 30 V amplifier that remains in active production.

جێگرەوەکانی جێگۆڕکێ بۆ LM258WYST — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM258WYST (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Amplifier Type, Package, Automotive Grade, Number of Circuits, Output Type.

STMicroelectronics
Amplifier Type: General-purpose operational amplifier
Package: 8-SOIC
Automotive Grade: Automotive-grade variant
بەراوردکردن لەگەڵ LM258WYST →
STMicroelectronics
Package: 8-MiniSO
Output Type: Single-ended output per channel
بەراوردکردن لەگەڵ LM258WYST →
STMicroelectronics
Amplifier Type: Low-power dual operational amplifier
بەراوردکردن لەگەڵ LM258WYST →

LM2904YST

✅ جێگرەوەی ڕاستەوخۆ
STMicroelectronics
📦 MiniSO-8 (8-TSSOP)
Dual operational amplifier · 2 channels · Single-ended output per channel · 30 V · ±15 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LM358YST

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 MiniSO-8 (8-TSSOP)
Same MiniSO-8 outline and 1.1 MHz GBW, but the lower-voltage general-purpose member of the family (not the 30 V automotive grade), so supply range and temperature class differ by roughly 30%

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

LM358WN

✅ جێگرەوەی ڕاستەوخۆ
📦 MiniSO-8 (8-TSSOP)
Dual general-purpose amplifier in the same 8-pin MiniSO-8 outline with the same 1.1 MHz gain-bandwidth product; lower supply rating than the 30 V LM258 family

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

LM2904YDT

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
STMicroelectronics
📦 MiniSO-8 (8-TSSOP)
General-purpose operational amplifier · 2 channels · 2 circuits · Dual independent operational amplifier · Low-power · 30 V · 0.6 V/µs · Single-ended

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LM358YPT

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
STMicroelectronics
📦 MiniSO-8 (8-TSSOP)
Low-power dual operational amplifier · 2 circuits · 1.1 MHz · 9 mV · TSSOP-8 · PDSO8 · Surface mount

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LM258WYST زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Amplifier Type Dual General Purpose Operational Amplifier
Number of Circuits 2 (independent channels)
Gain-Bandwidth Product 1.1 MHz
Maximum Supply Voltage 30 V
Minimum Supply Voltage 3 V
Slew Rate 0.3 V/us
Input Offset Voltage 2 mV typical
Input Bias Current 20 nA typical
Input Resistance 100 Mohm typical
Quiescent Supply Current 0.7 mA per amplifier typical
Open Loop Gain 100 dB typical
Common Mode Rejection Ratio 90 dB typical
Supply Rejection Ratio 100 dB typical
Output Swing Rail-to-rail output swing capability
Compensation Internally frequency-compensated, unity-gain stable
Automotive Grade Yes, 30 V automotive-qualified family
پاکێج MiniSO-8 / 8-TSSOP, 0.65 mm pitch, 3.0 mm width
جۆری دامەزراندن Surface Mount
دۆخی RoHS Compliant
Packaging Tape and reel

ڕێکخستنی پینی LM258WYST

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
پین 1 OUT1 — Channel 1 amplifier output
پین 2 IN-1 — Channel 1 inverting input
پین 3 IN+1 — Channel 1 non-inverting input
پین 4 GND — Negative supply / ground
پین 5 IN+2 — Channel 2 non-inverting input
پین 6 IN-2 — Channel 2 inverting input
پین 7 OUT2 — Channel 2 amplifier output
پین 8 VCC — Positive supply input

بەکارهێنانە باوەکان

LM258WYST گونجاوە بۆ 6 بەکارھێنانs: 12V Automotive Sensor Signal Conditioning, 24V Industrial Control Loops, Differential Bridge Sensor Amplification, Current Loop Receiver and Transmitter Buffer, Audio and Headphone Output Buffering, Battery Monitoring and Protection Front End.

🚗

12V Automotive Sensor Signal Conditioning

The LM258WYST is a natural fit for 12 V automotive sensor conditioning because its 30 V maximum supply rating lets both amplifier channels sit directly on the vehicle battery rail without a separate regulator or level shifter. With 1.1 MHz gain-bandwidth product and 0.3 V/us slew rate it handles slow to medium-rate sensor signals, and the millivolt-level input offset voltage keeps the error small relative to typical 0.5 V to 5 V sensor outputs. The automotive qualification of the LM258 family suits body, chassis and powertrain peripherals, while the 8-pin MiniSO-8 package keeps the footprint small for dense harness-side electronics.

🏭

24V Industrial Control Loops

In 24 V industrial control cabinets the LM258WYST removes the need for a 5 V front end, because the same amplifier can be powered directly from the 24 V bus up to its 30 V ceiling. That saves a regulator stage, reduces board area and improves transient immunity on noisy machine rails, where the 100 dB typical supply rejection ratio helps keep the loop stable. Two independent channels per package allow a single dual part to handle both a feedback amplifier and an error amplifier, and the 1.1 MHz gain-bandwidth product is more than adequate for process control loops in the kilohertz range.

🧩

Differential Bridge Sensor Amplification

The dual configuration of the LM258WYST is ideal for bridge-based sensing, where one channel buffers the positive excitation side and the other the negative side, cancelling common-mode error directly in the signal path. Because both amplifiers come from the same die, their offset voltage and bias current track closely, which improves differential accuracy compared with two unrelated parts. The high input resistance of roughly 100 Mohm loads the bridge only lightly, and the internal frequency compensation makes the stage unity-gain stable for direct buffer use with no external compensation capacitor.

⚡

Current Loop Receiver and Transmitter Buffer

The LM258WYST works well as the front end of a 4-20 mA current-loop receiver, where the amplifier buffers the sense resistor voltage and drives the transmitter stage toward the 24 V line supply. Its 30 V operating ceiling matches the industrial loop voltage, and the roughly 0.7 mA per-amplifier quiescent draw keeps loop power budget low, which matters for loop-powered field transmitters. The 1.1 MHz bandwidth provides ample loop gain for loop shaping, and the rail-to-rail output swing capability keeps the output useful across the loop resistance range.

🎧

Audio and Headphone Output Buffering

The LM258WYST can buffer headphone and line-level audio outputs in equipment that runs from a single supply of 12 V or 24 V, where a 5 V-only dual amplifier would be over-stressed. Its 1.1 MHz gain-bandwidth product is more than sufficient for 20 kHz audio content, and the low quiescent current of about 0.7 mA per amplifier suits battery-powered portable audio gear that must also survive a wide supply range. The rail-to-rail output swing capability maximizes usable output level into headphone impedances without a boost stage.

🔋

Battery Monitoring and Protection Front End

In battery packs and power-management boards, the LM258WYST amplifies cell-monitor taps and drives the comparison stage that protects against over-charge and over-discharge. Its wide 3 V to 30 V operating span means the same amplifier handles both a 3 V cell sense line and a 24 V bus sense line, and the automotive qualification matches the harsh thermal environment inside a pack enclosure. Two channels per package support dual-polarity sensing, and the 0.7 mA quiescent draw per amplifier avoids loading the very supply it is monitoring.

What is the operating voltage of the LM258WYST?
The LM258WYST operates from a single supply of 3 V up to 30 V. This wide span is the key reason the automotive-qualified LM258 family is used directly on 12 V and 24 V rails, where a 5 V-only amplifier cannot be used. According to the STMicroelectronics LM258 datasheet, the 30 V maximum supply rating leaves headroom above a 24 V industrial bus while still covering 12 V automotive systems and auxiliary 5 V rails in the same design.
What are the key specifications of LM258WYST that engineers should know?
The LM258WYST is a dual general-purpose op amp with a 1.1 MHz gain-bandwidth product, 0.3 V/us slew rate, 2 mV typical input offset voltage, 20 nA typical input bias current and about 0.7 mA quiescent current per amplifier. It is internally frequency-compensated for unity-gain stability, accepts a 3 V to 30 V single supply, and comes in the 8-pin MiniSO-8 (8-TSSOP) package. Both amplifiers are independent with common supply pins.
Where can I download the LM258WYST datasheet PDF?
The LM258WYST datasheet is published by STMicroelectronics and can be downloaded from the ST product documentation portal at st.com, where the LM258 series datasheet covers both the LM258 and LM2904 variants. Mirror copies of the same manufacturer document are also indexed on datasheet aggregation sites such as datasheets.com and Octopart. Always verify the revision date, since automotive qualification and package drawings have been revised across datasheet revisions.
Where do I find the LM258WYST pinout?
The LM258WYST uses the standard 8-pin MiniSO-8 dual op amp pinout: pin 1 is OUT1, pins 2 and 3 are IN- and IN+ of channel 1, pin 4 is GND, pins 5 and 6 are IN+ and IN- of channel 2, pin 7 is OUT2, and pin 8 is VCC. The pin description table in the STMicroelectronics LM258 datasheet is the authoritative reference for board layout and probe points.
Is the LM258WYST the same as the LM2904YST?
The LM258WYST and LM2904YST are closely related STMicroelectronics dual general-purpose amplifiers with the same 1.1 MHz gain-bandwidth product, 30 V supply ceiling and 8-pin MiniSO-8 footprint. The main differences are the qualification and temperature-class positioning: the LM258 is the automotive-qualified 30 V part, while the LM2904 is positioned for industrial and automotive control systems. Both are pin-to-pin compatible in the MiniSO-8 outline.
What is the best drop-in replacement for the LM258WYST?
The closest drop-in replacement is the LM2904YST, a dual general-purpose amplifier in the identical 8-pin MiniSO-8 package with the same 1.1 MHz gain-bandwidth product and 30 V supply rating, making it a pin-to-pin fit on existing boards. The LM358YST in the same MiniSO-8 outline is also usable, but it is the lower-voltage, non-automotive member of the family, so automotive temperature requirements should be checked before substitution.
What can replace the LM258WYST?
Within the STMicroelectronics family, the LM2904YST and the LM358YST are the natural replacements, both offered in the same 8-pin MiniSO-8 outline as the LM258WYST so no PCB change is required. Because the LM258 is the automotive-qualified 30 V variant, pick the LM2904YST when temperature and qualification requirements must be preserved, and confirm the LM358 grade meets your ambient range before using it in a vehicle.
Is LM258WYST suitable for 24V industrial control loops?
Yes, the LM258WYST is well suited to 24 V industrial control loops because its maximum supply voltage is 30 V and it is the automotive-qualified member of the ST dual general-purpose amplifier family. Operating directly on a 24 V rail avoids the level shifting and additional regulator stage that a 5 V-only amplifier would force. Remember to keep about 1.5 V of output headroom at the top of the supply range.
LM258WYST vs LM358YST - which is better for automotive use?
The LM258WYST is the better choice for automotive use because the LM258 is the 30 V automotive-qualified variant of the family, while the LM358 is the lower-voltage general-purpose member. Both share the 1.1 MHz gain-bandwidth product and the 8-pin MiniSO-8 package, so they are electrically similar drop-in options, but qualification and temperature range differ and must match your vehicle specification.
What is the best Texas Instruments equivalent for the LM258WYST?
The closest Texas Instruments counterpart by function is the LM358 in an 8-pin small-outline package, which provides the same dual internally compensated general-purpose amplifier topology, but the physical land pattern differs from the MiniSO-8 (0.65 mm pitch) outline of the LM258WYST, so it is not a board-level drop-in without a footprint change. Confirm package dimensions and pinout against the manufacturer datasheet before substituting.
How much current does the LM258WYST draw from the supply?
The LM258WYST draws roughly 0.7 mA per amplifier in quiescent state, so about 1.4 mA for the dual device, and that figure is largely independent of the supply voltage magnitude. The low drain current is a defining feature of the bipolar LM358/LM258/LM2904 family and is what makes the part usable in battery-powered 12 V vehicle instrumentation alongside wide supply operation.
Can I use the LM258WYST as a voltage follower?
Yes, the LM258WYST is unity-gain stable because its frequency compensation is integrated on the die, so it can be wired as a voltage follower without external compensation components. Just remember that the output stage cannot reach the exact supply rails, so leave about 1.5 V of headroom at the 30 V supply limit and roughly 2 V at the low end of the supply range when the follower must swing close to the rails.
Where to buy LM258WYST online?
The LM258WYST is widely stocked by authorized distributors and regional component suppliers, with several hundred thousand pieces shown in the channel listings and immediate shipping available. For a firm quotation covering volume, date code and packaging, use the Request a Quote form on this page, which lets you specify reel quantities and custom pack quantities without chasing multiple sellers.
What is the price of the LM258WYST?
Pricing for the LM258WYST varies with quantity, date code and reel versus cut-tape packaging, and it changes with market conditions, so it is not shown as a static figure here. Submit the part number through the Request a Quote form on this page and you will receive current unit pricing at your required quantities along with stock and lead time for the 8-TSSOP tape-and-reel package.
What is the lead time for the LM258WYST?
Lead time for the LM258WYST is typically short because the part is an active, high-volume automotive dual op amp with multiple stocking channels, and standard tape-and-reel quantities are commonly available for immediate shipment. Use the Request a Quote form on this page to confirm current lead time, available reel sizes and date-code management for your specific production schedule.
Is the LM258WYST in stock?
The LM258WYST is an active STMicroelectronics part with broad channel availability, and the distributor listings for this exact MPN show large quantities on hand with immediate shipping. Inventory levels move quickly, so request a quote on this page to confirm live stock, reel packaging and the earliest delivery date against your build schedule.
What are the key differences between the LM258WYST and a generic dual op amp?
The LM258WYST differs from a generic 5 V dual op amp mainly in supply range and qualification: it accepts up to 30 V on a single supply, carries automotive qualification, and is packaged in the small 8-pin MiniSO-8 (0.65 mm pitch) outline. Its 1.1 MHz gain-bandwidth product and 0.3 V/us slew rate make it adequate for audio-frequency and general control loops, but not for precision or high-speed instrumentation.

داتای سەرچاوەی ئەندازیاری بۆ LM258WYST — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the LM258WYST when you need two general-purpose amplifiers running from a single supply well above 5 V, particularly on 12 V automotive or 24 V industrial rails, or when your design requires automotive qualification of the ST dual general-purpose family. Choose the LM2904YST when you need the same 30 V electrical performance and identical MiniSO-8 footprint but the industrial and automotive control positioning fits your qualification paperwork better. Choose the LM358YST, LM358WN or LM358Y when the signal chain lives on a 5 V or low-voltage auxiliary rail and the automotive temperature and qualification requirements are not applicable; the 1.1 MHz bandwidth and internal compensation are essentially identical, so the decision reduces to supply rating and qualification. All five options share the same 8-pin MiniSO-8 (8-TSSOP) land pattern, so switching between them requires no PCB change and no firmware change. None of them is the right choice for precision or high-speed instrumentation, where a higher-bandwidth, low-offset part is needed.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە LM2904YST LM358YST LM358WN LM2904Y LM358Y
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package MiniSO-8 (8-TSSOP), 0.65 mm pitch MiniSO-8 (8-TSSOP) - same footprint MiniSO-8 (8-TSSOP) - same footprint MiniSO-8 (8-TSSOP) - same footprint MiniSO-8 (8-TSSOP) - same footprint MiniSO-8 (8-TSSOP) - same footprint
Number of Amplifiers 2 independent channels 2 independent channels 2 independent channels 2 independent channels 2 independent channels 2 independent channels
Gain-Bandwidth Product 1.1 MHz 1.1 MHz 1.1 MHz 1.1 MHz 1.1 MHz 1.1 MHz
Automotive Grade Yes (30 V automotive-qualified family) Industrial and automotive control positioning General purpose, not automotive qualified General purpose Automotive/industrial positioning General purpose
Compensation Internally frequency-compensated, unity-gain stable Internally frequency-compensated Internally frequency-compensated Internally frequency-compensated Internally frequency-compensated Internally frequency-compensated
Supply Current 1.1 MHz GBW, 0.3 V/us slew rate, 30 V supply 1.1 MHz GBW, 30 V supply 1.1 MHz GBW, lower supply class 1.1 MHz GBW, lower supply class 1.1 MHz GBW, 30 V supply 1.1 MHz GBW, lower supply class
Order Code / Packaging LM258WYST - tape and reel, 8-TSSOP Tape and reel, 8-TSSOP Tape and reel, 8-TSSOP Tape and reel, 8-TSSOP Base ordering code, 8-TSSOP Base ordering code, 8-TSSOP

جیاکەرەوە سەرەکییەکان

  • Operates directly on 24 V industrial and 12 V automotive rails (بەراورد بەLM358YST)
  • Two independent amplifiers in a 0.65 mm pitch MiniSO-8 footprint (بەراورد بەLM358WN)
  • Automotive-qualified grade with the same electrical core (بەراورد بەLM2904YST)
  • Same 1.1 MHz performance as family members with a lower supply ceiling (بەراورد بەLM358Y)

تێبینییەکانی دیزاین

Do not assume the output can sit exactly on the supply rail. The bipolar output stage of the LM258 family needs roughly 1.5 V of headroom at the 30 V supply limit and about 2 V at the low end of the supply range, so a design that asks for a 0 V output on a 3 V supply will clip. Check the output swing spec in the STMicroelectronics LM258 datasheet against your required output range, and keep the load current within the amplifier's rated drive capability when the output sits close to the rail.

Place a 100 nF bypass capacitor directly at the VCC pin (pin 8) and connect it to the ground plane with a very short via, since the supply pin is shared by both channels and any supply impedance shows up as added noise in both amplifier outputs. Keep the ground connection of the two channels on the same solid ground plane, avoid routing feedback traces between the input and output pins of the same channel, and place feedback resistors within a few millimetres of the input pins to minimise parasitic capacitance effects on stability at higher closed-loop gains.

Estimated: with a 24 V supply, a 5 V output and 10 mA of load current per channel, each amplifier dissipates about 0.19 W, and 0.38 W for both channels of the package. In the MiniSO-8 outline this is manageable with normal copper pour at ambient temperatures up to about 85 C, but at higher ambient or higher channel current add a thermal relief and copper area around the pins. Verify junction temperature against the worst-case case: 24 V supply, minimum load resistance and maximum ambient.

Because the compensation is internal, the LM258WYST is unity-gain stable, but closed-loop gain still sets the usable bandwidth through the feedback network. On a 24 V bus with switch noise, add an input RC filter (for example 1 kohm plus 100 nF) ahead of the non-inverting pin if the source impedance is high, and keep the input common-mode voltage within the amplifier's common-mode range. For differential bridge inputs, drive both channels from matched networks so the common-mode rejection advantage of the matched die is preserved.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Unknown
AEC-Q100
Qualified
بێ قوڕقوشم
Yes
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The LM258 family is the automotive-qualified 30 V member of the ST dual general-purpose amplifier family; RoHS compliance is indicated by the manufacturer listing. REACH, halogen-free status and conflict-minerals declarations should be confirmed against the current STMicroelectronics material declaration for the specific order code.

داتا پشتڕاستکراوەتەوە لە: 2026-11-20 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

LM258WYST LM258WYST datasheet LM258WYST pinout LM258WYST price LM258WYST stock STMicroelectronics LM258WYST LM258WYST vs LM2904YST LM258WYST drop-in replacement LM258WYST equivalent op amp LM258WYST application circuit LM258WYST 8-TSSOP MiniSO-8 LM258WYST 30V dual op amp LM258WYST automotive amplifier LM258WYST schematic symbol LM258WYST spice model

پێکهاتە و زاراوە پەیوەندیدارەکان

STMicroelectronics LM258WYST LM258 LM2904YST LM358YST LM358MDA dual operational amplifier general purpose amplifier voltage amplifier analog signal conditioning gain-bandwidth product slew rate input offset voltage input bias current quiescent current unity-gain stable frequency compensated MiniSO-8 8-TSSOP surface mount SMD package automotive electronics industrial control 24V bus RoHS AEC-Q100 bridge sensor current loop bipolar process
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ