LM2902DTBR2G - 1 MHz Quad Operational Amplifier | onsemi
MPN: LM2902DTBR2G ✓ چالاکLM2902DTBR2G گشتی
An operational amplifier is an analog building block that amplifies the voltage difference between its inverting and non-inverting inputs. The quad LM2902 configuration places four independently usable operational amplifiers in one package, reducing board area when a design needs multiple gain stages, buffers, comparators, filters, or instrumentation amplifiers. Within the broader semiconductor hierarchy, this device is a voltage-amplifier IC, an analog amplifier, and ultimately a discrete-component-level signal-conditioning element.
The headline features of the LM2902DTBR2G include four amplifier channels, 1 MHz gain-bandwidth product, 0.6 V/µs slew rate, true differential inputs, and a wide 3 V to 32 V supply range. Its low-power design is suited to battery-operated and distributed analog systems where four separate amplifier packages would be inconvenient. The 14-pin TSSOP-14 package supports compact surface-mount layouts and is available in a tape-and-reel ordering format.
The bipolar amplifier architecture is intended for general-purpose precision rather than high-speed or micropower applications. A 1 MHz gain-bandwidth product makes the device appropriate for low-frequency audio, control, sensing, and signal-conditioning stages. Designers should account for the amplifier's input offset voltage, input bias current, output swing limits, common-mode range, and supply-voltage dependence when defining gain or checking circuit behavior.
Typical uses include four-channel sensor conditioning, active filtering, buffer stages for transducers, low-frequency audio amplification, comparators with suitable hysteresis, and general control loops. The quad organization can also simplify instrumentation designs by providing local amplifiers around a sensor or converter. Its broad supply range supports both conventional 5 V and 12 V analog systems and higher rail arrangements where the circuit remains within the device's electrical limits.
Design work should begin with the manufacturer's pin-description and electrical-characteristics tables. Place the bypass capacitor close to the supply pins, route sensitive input signals away from switching nodes, and verify output swing, input common-mode range, and stability for the selected gain. Because four channels share one package, thermal performance and power dissipation should be evaluated across the maximum number of simultaneously active amplifiers.
This product page combines the LM2902DTBR2G electrical identity, package and application context with engineering-focused comparison information. It also identifies same-footprint alternatives, explains replacement considerations, and highlights practical design checks that help shorten component selection and board-level validation.
جێگرەوەکانی جێگۆڕکێ بۆ LM2902DTBR2G — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM2902DTBR2G (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Input Offset Voltage, Amplifier Type, Gain-Bandwidth Product, Input Type.
LM324DTBR2
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2902PWRG3
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2902KPWR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2902DTBR2G زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Amplifier Type | General-purpose operational amplifier |
| Number of Amplifier Channels | 4 circuits |
| Gain-Bandwidth Product | 1 MHz |
| Slew Rate | 0.6 V/µs |
| Minimum Single-Supply Operating Voltage | 3 V |
| Maximum Single-Supply Operating Voltage | 32 V |
| Mouser Stated Supply Range | 3 V to 26 V |
| Input Type | True differential inputs |
| مەودای پلەی گەرمیی کارکردن | -40 °C to +105 °C |
| Architecture | Bipolar |
| پاکێج | 14-pin TSSOP |
| جۆری دامەزراندن | Surface mount |
| Shipping Format | Tape and reel |
| Case Outline | 948G-01 |
| MSL Type | 1 |
| MSL Peak Temperature | 260 °C |
| Status | Active |
ڕێکخستنی پینی LM2902DTBR2G
| پین 1 | OUT1 — Amplifier 1 output |
| پین 2 | -IN1 — Amplifier 1 inverting input |
| پین 3 | +IN1 — Amplifier 1 non-inverting input |
| پین 4 | V+ — Positive supply voltage |
| پین 5 | +IN2 — Amplifier 2 non-inverting input |
| پین 6 | -IN2 — Amplifier 2 inverting input |
| پین 7 | OUT2 — Amplifier 2 output |
| پین 8 | OUT3 — Amplifier 3 output |
| پین 9 | -IN3 — Amplifier 3 inverting input |
| پین 10 | +IN3 — Amplifier 3 non-inverting input |
| پین 11 | V- — Negative supply voltage or ground connection for single-supply operation |
| پین 12 | +IN4 — Amplifier 4 non-inverting input |
| پین 13 | -IN4 — Amplifier 4 inverting input |
| پین 14 | OUT4 — Amplifier 4 output |
بەکارهێنانە باوەکان
LM2902DTBR2G گونجاوە بۆ 6 بەکارھێنانs: Sensor Signal Conditioning, Industrial Control Loops, Active Audio Filtering, Transducer Buffering, Comparator and Threshold Circuit, Power-Supply Monitoring.
Sensor Signal Conditioning
The LM2902DTBR2G suits low-frequency sensor-conditioning designs requiring multiple amplifier channels on a wide supply rail. Its four true-differential amplifier sections can provide input buffers, gain stages, and active filtering without using four separate packages. The 1 MHz gain-bandwidth product supports signals well below the amplifier’s upper frequency limit, while operation from 3 V to 32 V allows the same device to serve 5 V, 12 V, or higher-voltage analog systems. Check sensor source impedance against input bias current, verify the common-mode range, and keep high-impedance input traces short to reduce offset and interference effects.
پێشنیارکراو
Industrial Control Loops
The LM2902DTBR2G is applicable to industrial control and monitoring circuits that require several low-frequency amplification functions in one package. Four channels can be assigned to sensor interfaces, error amplifiers, actuator drivers, and signal conditioning. Its 3 V to 32 V supply capability accommodates conventional industrial control rails, while the -40 °C to +105 °C operating range supports temperature-controlled equipment. Because the 1 MHz bandwidth and 0.6 V/µs slew rate are modest, the device is best suited to slow control loops rather than high-bandwidth feedback networks. Confirm output swing, load capability, and stability with the application network.
پێشنیارکراو
Active Audio Filtering
The LM2902DTBR2G can implement active filters and low-frequency audio signal-conditioning stages where four amplifiers provide useful channel consolidation. Its 1 MHz gain-bandwidth product is suitable for voice-band and other low-frequency networks, and the 0.6 V/µs slew rate helps preserve low-frequency waveforms without excessive distortion. The wide supply range allows operation from compact single-supply systems. Designers should avoid treating the general-purpose amplifier as a low-noise audio device without checking its noise and distortion specifications. Keep input and feedback impedances practical, observe input bias-current errors, and verify the output swing against the required signal level.
پێشنیارکراو
Transducer Buffering
The LM2902DTBR2G provides four channels for buffering high-impedance transducers such as temperature, pressure, and position sensors. True differential inputs are useful when the sensor produces a small differential signal, and the quad package can reduce component count in multi-channel measurement systems. The device’s 1 MHz bandwidth is more than sufficient for many slow sensors, but input bias current can create errors with very high source resistance. Use short guarded input routes, assess offset drift over the required temperature range, and ensure the selected sensor output remains inside the amplifier’s common-mode range. The 14-pin TSSOP footprint supports compact analog boards.
پێشنیارکراو
Comparator and Threshold Circuit
The LM2902DTBR2G can operate as a comparator in threshold, relay-control, and alarm circuits when the selected channel’s behavior is suitable for the required response. Four channels allow independent comparisons without requiring four packages, and the 0.6 V/µs slew rate supports moderate switching speeds. The device’s 3 V minimum supply makes it useful in compact low-voltage systems, while its maximum supply rating permits higher-voltage rails. Review the manufacturer’s input and output behavior before operating an amplifier linearly as a comparator, especially around the positive supply rail. Add hysteresis where required and verify output levels for the driven load.
پێشنیارکراو
Power-Supply Monitoring
The LM2902DTBR2G is suitable for monitoring and fault-detection circuitry around industrial or communications power rails. Its 3 V to 32 V operating range allows channels to sense system supply conditions when the actual amplifier supply and input common-mode limits permit. The quad arrangement can perform rail comparison, window detection, current-related signal amplification, and buffered status outputs. Its 1 MHz bandwidth is ample for slow power-supply events. Keep sensing traces away from high-current switching paths, account for input offset when establishing tight thresholds, and ensure every monitored node stays within the valid input range. Verify the complete threshold design at minimum and maximum supply conditions.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LM2902DTBR2G — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LM324DTBR | LM2902PW | LM2902KPWR |
|---|---|---|---|---|
| Package | TSSOP-14 | TSSOP-14 | TSSOP-14 | TSSOP-14 |
| Brand | onsemi | onsemi | Texas Instruments | Texas Instruments |
| Amplifier Configuration | Quad operational amplifier | Quad operational amplifier | Quad operational amplifier | Quad operational amplifier |
| Gain-Bandwidth Product | 1 MHz | 1 MHz | 1 MHz | 1.2 MHz |
| Maximum Supply Voltage | 32 V | 32 V | 32 V | 32 V |
| Minimum Supply Voltage | 3 V | 3 V | 3 V | 3 V |
| Architecture | Bipolar | Bipolar | Bipolar | Bipolar |
| Input Configuration | True differential inputs | True differential inputs | True differential inputs | True differential inputs |
| Special Features | General-purpose low-power operation | LM324 family general-purpose operation | LM2902 family high-voltage operation | LM2902 family with 1.2 MHz bandwidth |
جیاکەرەوە سەرەکییەکان
- Four complete amplifier channels in one compact package (بەراورد بەLM324DTBR)
- Identical documented gain-bandwidth product (بەراورد بەLM2902PW)
- Lower documented bandwidth than the higher-bandwidth family alternative (بەراورد بەLM2902KPWR)
تێبینییەکانی دیزاین
Place the supply bypass capacitor close to pins 4 and 11 and use a short, low-inductance connection to the device. Sensitive non-inverting inputs should be routed away from the outputs of adjacent channels, particularly OUT1 and OUT4, because parasitic input-to-output coupling can create unintended feedback. Use a solid ground reference and avoid sharing narrow return paths with switching or high-current loads.
Do not assume that every LM2902-family implementation has identical offset voltage, input bias current, output swing, or common-mode limits. Although LM2902PW and LM2902KPWR use the same TSSOP-14 format, compare the channel and worst-case electrical characteristics before substitution. Also check whether all four amplifiers can operate simultaneously at the intended load without exceeding package power limits.
Keep high-impedance input nodes physically compact and consider guarding or shielding when measuring weak sensor signals. The 1 MHz gain-bandwidth product is appropriate for low-frequency signals, but high closed-loop gain reduces usable bandwidth and can amplify bias-current and offset errors. Follow the manufacturer’s recommended compensation or feedback-network guidance for the selected gain rather than adding arbitrary capacitance to control instability.
Evaluate dissipation across all four channels when designing for maximum continuous operation. Estimated: amplifier dissipation per channel is approximately (VIN − VOUT) × IOUT plus the channel’s quiescent contribution; multiply the resulting per-channel value by the number of active channels for a first-pass package estimate. Confirm the total against the manufacturer’s package thermal limits and account for copper-area-dependent thermal resistance.
زانیاری پابەندبوون
The comparison data identifies the part as PbAHP and active, but it does not provide explicit RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declarations. These fields remain unknown rather than being inferred.