LM2902MX/NOPB - 26V 1.2MHz Quad Op Amp | Texas Instruments
MPN: LM2902MX/NOPB ✓ چالاکLM2902MX/NOPB گشتی
An operational amplifier is an analog signal-conditioning integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. The LM2902 contains four independent amplifier sections with internal frequency compensation, allowing stable operation in common noninverting, inverting, summing, comparator, and feedback configurations. Its low-power design is intended for battery-powered and general-purpose systems where a wide supply-voltage range is more valuable than high-speed performance.
Key features include a 3 V to 32 V single-supply operating range, a 26 V maximum total supply voltage, 1.2 MHz gain-bandwidth product, 2 mV typical input offset voltage, and approximately 0.5 V/us slew rate. The four-channel architecture reduces component count and board area when multiple analog signals require conditioning. The 14-pin SOIC package is also available in related LM2902 order variants, making footprint planning important when selecting an exact replacement.
The LM2902 family uses a bipolar voltage-feedback architecture. Internal compensation removes the need for an external frequency-compensation capacitor in typical closed-loop configurations. The device can operate from a single positive supply or from split positive and negative supplies. Its relatively modest bandwidth makes it appropriate for slower control and measurement loops rather than high-speed video, RF, or precision signal-chain applications.
Typical uses include transducer and sensor conditioning, low-frequency active filters, current-loop and voltage-feedback control, audio preamplification, battery-powered instrumentation, and general analog signal processing. The wide supply range also permits operation from industrial 24 V systems when the total supply voltage remains within the device rating. Designers should account for input common-mode range, output swing, input bias current, and stable feedback-network selection when using the amplifier near its voltage limits.
A key design consideration is the relationship between supply voltage, input range, and output swing. A nominal 3 V minimum supply does not mean the input and output can reach every rail voltage, so the signal amplitudes must remain inside the amplifier's specified common-mode and output ranges. Decoupling capacitors should be placed close to the supply pins, and feedback resistors should be selected to keep closed-loop gain and noise performance appropriate for the application.
This product page combines the manufacturer's LM2902 product information, distributor references, package identification, and practical guidance for signal conditioning, supply bypassing, common-mode limits, and replacement planning.
جێگرەوەکانی جێگۆڕکێ بۆ LM2902MX/NOPB — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM2902MX/NOPB (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Supply Configuration, Number of Amplifier Channels, Frequency Compensation, Input Offset Voltage.
LM2902DR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2902M/NOPB
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2902D
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2902NSR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2902KVQDR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2902MX/NOPB زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Amplifier Type | General Purpose |
| Number of Channels | 4 |
| Gain-Bandwidth Product | 1.2 MHz |
| Input Offset Voltage | 2 mV typical |
| Slew Rate | 0.5 V/us |
| Single-Supply Operating Range | 3 V to 32 V |
| Maximum Total Supply Voltage | 26 V |
| پاکێج | 14-SOIC |
| ژمارەی پینەکان | 14 |
| Architecture | Voltage-feedback |
| Frequency Compensation | Internal |
| دۆخی RoHS | Compliant |
| جۆری دامەزراندن | Surface Mount |
ڕێنمایی ڕێکخستنی پینی LM2902MX/NOPB 14-soic
ڕێکخستنی پین بۆ LM2902MX/NOPB (پاکێجی 14-soic). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LM2902MX/NOPB.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LM2902MX/NOPB گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Conditioning, Audio Preamplification, Power Supply Feedback Control, Battery-Powered Instrumentation, Active Filter and Tone Control, Motor and Actuator Control.
Industrial Sensor Conditioning
The LM2902MX/NOPB is suitable for conditioning temperature, pressure, position, and current-sensor signals in industrial instrumentation because its four internal channels can handle multiple low-frequency analog paths in one package. The 3 V to 32 V single-supply range supports compatibility with common industrial rails, while the 1.2 MHz gain-bandwidth product is adequate for many sensor and filtering stages. Its 2 mV typical input offset voltage can help control small-signal errors. Place the device close to the sensor interface, bypass the supply pins, and keep input bias-current effects within the selected resistor network.
پێشنیارکراو
Audio Preamplification
LM2902MX/NOPB can implement line-level audio preamplification, tone-control stages, or active filters because each of its four channels provides 1.2 MHz gain-bandwidth product and approximately 0.5 V/us slew rate. The device is most appropriate for lower-bandwidth audio paths rather than demanding high-fidelity or high-speed applications. Its four-channel organization can reduce the number of packages in a multi-stage signal path. Maintain adequate supply headroom for the desired output swing, observe the input common-mode range, and use stable feedback ratios suitable for the channel's gain.
پێشنیارکراو
Power Supply Feedback Control
The LM2902MX/NOPB is appropriate for slow error-amplifier, voltage-feedback, and current-feedback functions in industrial power-control designs. Its 3 V to 32 V single-supply operation permits use near common industrial voltage rails, and the 1.2 MHz bandwidth is suitable for many compensation loops that do not require high-frequency switching performance. The 2 mV typical input offset voltage is relevant when the feedback error is small. Confirm output swing, common-mode limits, stability, and power-supply bypass requirements directly from the manufacturer electrical-characteristics table.
پێشنیارکراو
Battery-Powered Instrumentation
LM2902MX/NOPB fits portable measurement and control equipment that needs several low-frequency analog channels from a compact 14-SOIC package. The 3 V minimum single-supply operating voltage supports low-voltage systems, and the low-power quad configuration can reduce the number of amplifier packages compared with discrete singles. The 1.2 MHz bandwidth handles sensor amplifiers, buffers, and low-frequency active filters rather than high-speed conversion requirements. Designers should still evaluate input bias current, quiescent current, shutdown strategy, and the input and output limits for the intended battery operating points.
پێشنیارکراو
Active Filter and Tone Control
The LM2902MX/NOPB can implement low-frequency active filters, integrators, and audio tone-control networks because its four internally compensated channels provide 1.2 MHz gain-bandwidth product and approximately 0.5 V/us slew rate. These characteristics support moderate-bandwidth feedback networks while limiting the external component count. Use the device where the closed-loop gain, signal amplitude, and stability margin remain within the manufacturer specifications. Accurate cutoff and gain results also depend on resistor tolerances, capacitor selection, loading, and the amplifier's frequency-response limits.
پێشنیارکراو
Motor and Actuator Control
LM2902MX/NOPB is useful for low-frequency closed-loop control around motor drivers, actuators, and electromechanical systems. Four channels can support feedback amplification, error amplification, and auxiliary signal conditioning within one package. The 3 V to 32 V supply range and 1.2 MHz bandwidth suit slower control loops, but the device is not intended to replace a high-current motor driver or a high-bandwidth position-loop amplifier. Verify output swing, capacitive-load stability, noise behavior, and thermal conditions for the driver interface.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LM2902MX/NOPB — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LM2902DR | LM2902M/NOPB | LM2902D | LM2902NSR | LM2902KVQDR |
|---|---|---|---|---|---|---|
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Number of Channels | 4 | 4 | 4 | 4 | 4 | 4 |
| Amplifier Type | General Purpose | General Purpose | General Purpose | General Purpose | General Purpose | General Purpose |
| Frequency Compensation | Internal | Internal | Internal | Internal | Internal | Internal |
جیاکەرەوە سەرەکییەکان
- Four general-purpose amplifiers in one 14-SOIC package (بەراورد بەLM2903DR)
- Wide single-supply operating range (بەراورد بەLM2902D)
- Low-power general-purpose signal conditioning (بەراورد بەLM2902KVQDR)
تێبینییەکانی دیزاین
Place the supply-bypass capacitors immediately adjacent to the LM2902MX/NOPB power and ground pins. Use short traces and a continuous ground plane to minimize parasitic inductance, which is especially important when the amplifier shares a board with switching regulators. Route sensitive amplifier-input and feedback nets away from switching nodes and high-current return paths. Confirm the recommended capacitor values and layout in the LM2902 manufacturer datasheet before PCB release.
Do not treat the full 3 V to 32 V supply range as the usable input or output signal range. Check the common-mode input voltage, output swing, output-current, and supply limits for the worst-case operating condition. Also avoid assuming that the typical 2 mV offset applies at every temperature or trim condition. For low-offset or precision instrumentation, use the maximum offset and drift ratings from the manufacturer electrical-characteristics table.
Choose feedback resistors and closed-loop gain values appropriate for a 1.2 MHz gain-bandwidth product and approximately 0.5 V/us slew rate. Large-amplitude signals at high frequency can produce slew-rate limiting and distortion even when small-signal gain is acceptable. For active filters, include component tolerances and amplifier bandwidth in cutoff calculations. Keep source impedances low enough that input-bias-current errors remain small for the target measurement accuracy.
Because all four amplifiers share one package, assess thermal gradients and channel-to-channel interaction on the board. Maintain adequate copper around the SOIC pins, avoid enclosing the device with tall heat-generating components, and keep analog and digital return currents separated where possible. If multiple channels drive long cables or high-capacitance loads, verify stability and output-current limits rather than relying on the nominal small-signal response.
زانیاری پابەندبوون
The NOPB order code identifies lead-free processing, and component comparison information lists RoHS compliance. Other compliance attributes are not confirmed in the available manufacturer and distributor references.