Texas Instruments

LM2902QPWRQ1 - 26V Quad Op Amp | TI | Automotive

MPN: LM2902QPWRQ1 ✓ چالاک
26 V Vdss 14-pin TSSOP (PW) Package
MOQ: 1 |

LM2902QPWRQ1 گشتی

Texas Instruments LM2902QPWRQ1 is an automotive-qualified, quad operational amplifier designed for operation from a single supply or split supplies, with four independent, high-gain, internally frequency-compensated amplifiers in one 14-pin TSSOP package. Its headline ratings are a 26 V maximum supply, 1.2 MHz gain-bandwidth product, and 2 mV offset voltage.

An operational amplifier is a voltage-controlled differential amplifier whose high open-loop gain makes it useful for closed-loop signal conditioning. The quad configuration places four independent amplifiers in one package, reducing board area and simplifying power routing. Within the component hierarchy, this device is a quad operational amplifier, a linear amplifier IC, and a member of the broader analog signal-processing and semiconductor families.

The LM2902-Q1 family is qualified to AEC-Q100 specifications for automotive use. The LM2902QPWRQ1 ordering option is offered in a 14-pin PW TSSOP package and supports an operating temperature range of -40°C to +125°C. These characteristics make it appropriate for automotive electronics, industrial controls, instrumentation, and other systems that require four general-purpose amplifiers in a compact surface-mount package.

Internally, each amplifier combines high gain with frequency compensation, allowing stable closed-loop operation without external compensation in common gain configurations. Because the four amplifiers share a package and supply pins, PCB design must provide a low-impedance connection between the supply pins and decoupling capacitance. Careful grounding and input-signal routing remain essential for preserving signal integrity around the amplifier inputs.

Typical applications include sensor-signal conditioning, current-to-voltage conversion, voltage amplification, active filtering, differential sensing, and general feedback-control paths. In an automotive signal-conditioning circuit, the four channels can process separate sensor outputs or implement several stages around one system function, reducing component count while maintaining a common supply architecture.

A primary design consideration is verifying input and output common-mode limits against the actual signal range. Supply voltage alone does not establish usable input swing, output swing, or stability. Decoupling capacitors should be placed close to the supply pins, sensitive traces should avoid switching nodes, and unused amplifier channels should be configured according to the manufacturer datasheet rather than left floating.

This product page combines the device identity, AEC-Q100 qualification, 14-pin TSSOP packaging, functional guidance, same-family drop-in candidates, and practical implementation notes. Use the Texas Instruments datasheet and pin-description table as the controlling references for final schematic review, footprint verification, component tolerances, and production release.

جێگرەوەکانی جێگۆڕکێ بۆ LM2902QPWRQ1 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM2902QPWRQ1 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Input Offset Voltage, Amplifier Type, Maximum Supply Voltage, Number of Circuits.

Texas Instruments
Amplifier Type: Quad general-purpose operational amplifier
Maximum Supply Voltage: 30 V
Number of Circuits: 4 circuits
بەراوردکردن لەگەڵ LM2902QPWRQ1 →
Texas Instruments
Package: 14-TSSOP
Input Offset Voltage: 2 mV (typical)
Amplifier Type: General Purpose Operational Amplifier
بەراوردکردن لەگەڵ LM2902QPWRQ1 →

LM2902KAVQPWRQ1

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 TSSOP-14 (PW)
4 channels · 3 V to 32 V · 30 V · 1.2 MHz · 2 mV · 0.5 V/µs · 2 kV · Includes ground

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LM2902B-Q1

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 TSSOP-14 (PW)
Same 26 V supply class and 14-pin TSSOP package; the 1.2 MHz bandwidth difference is 0 MHz and the 2 mV offset difference is 0 mV for the headline ratings

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

LM2902BA-Q1

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 TSSOP-14 (PW)
Same 26 V supply class and 14-pin TSSOP package; the 1.2 MHz bandwidth difference is 0 MHz and the 2 mV offset difference is 0 mV for the headline ratings

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

LM2902QPWRQ1 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Operational Amplifier Count 4 circuits
Product Type Quad general-purpose operational amplifier
Maximum Supply Voltage 26 V
Gain-Bandwidth Product 1.2 MHz
Input Offset Voltage 2 mV
Supply Configuration Single supply or split supply
Amplifier Architecture High-gain, internally frequency-compensated
Automotive Qualification AEC-Q100 qualified
مەودای پلەی گەرمیی کارکردن -40°C to +125°C
پاکێج 14-pin TSSOP (PW)
جۆری دامەزراندن Surface mount

ڕێنمایی ڕێکخستنی پینی LM2902QPWRQ1 14-pin tssop (pw)

ڕێکخستنی پین بۆ LM2902QPWRQ1 (پاکێجی 14-pin tssop (pw)). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 14-pin tssop (pw) بۆ LM2902QPWRQ1

هیچ داتای وردی پینئاوت بەردەست نییە بۆ LM2902QPWRQ1.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

LM2902QPWRQ1 گونجاوە بۆ 6 بەکارھێنانs: Automotive Sensor Signal Conditioning, Industrial Control and Instrumentation, Current-to-Voltage Conversion, Active Filtering and Signal Conditioning, Audio and Communication Interface Conditioning, Battery-Powered Automotive Monitoring.

🚗

Automotive Sensor Signal Conditioning

The LM2902QPWRQ1 fits automotive sensor-conditioning circuits that require several amplified channels on one board. Its four independent, internally frequency-compensated operational amplifiers support gain stages, sensor buffers, and feedback paths without requiring four separate packages. The 26 V maximum supply rating accommodates automotive battery systems, while AEC-Q100 qualification and the -40°C to +125°C operating range support harsh-environment use. Design the channel around the sensor’s output range and verify input common-mode limits, output swing, offset error, and stability in the manufacturer datasheet.

🏭

Industrial Control and Instrumentation

The LM2902QPWRQ1 is useful in industrial measurement systems where multiple low-frequency analog signals must be conditioned near a controller or connector. Four integrated, high-gain amplifiers can support scaling, active filtering, and differential-to-single-ended conversion, reducing package count and simplifying supply distribution. Its 1.2 MHz gain-bandwidth product is appropriate for many sensor and control-bandwidth signals, while internal frequency compensation simplifies common closed-loop configurations. Validate input impedance, output drive, noise, and supply rejection against the specific transducer and industrial environment.

⚡

Current-to-Voltage Conversion

The LM2902QPWRQ1 can implement current-to-voltage conversion when a shunt resistor and feedback network feed one of its four high-gain, internally compensated amplifier channels. The remaining channels can buffer the reference voltage, amplify a second sensor, or implement active filtering around the conversion stage. The 26 V maximum supply supports a broad range of analog supply arrangements, and the 14-pin TSSOP package keeps the circuit compact. Choose resistor values for the required transimpedance gain, then confirm output swing and stability for the intended frequency range.

📡

Active Filtering and Signal Conditioning

The LM2902QPWRQ1 can form gain, first-order active-filter, and buffer stages in low-frequency analog signal chains. Its 1.2 MHz gain-bandwidth product provides useful closed-loop bandwidth for general-purpose conditioning, while the four channels allow multiple filter poles to be distributed across one package. Internal frequency compensation reduces the need for external compensation in standard closed-loop configurations. Select resistor and capacitor values against the required cutoff, gain, noise, and load, and verify that the intended topology remains stable with the selected feedback network.

🎧

Audio and Communication Interface Conditioning

The LM2902QPWRQ1 is appropriate for low-frequency audio, communications, and interface conditioning where multiple low-level signals require buffering or gain. Each channel is independent, high-gain, and frequency compensated, allowing four signal paths to share one 14-pin TSSOP package. Its 2 mV stated input offset provides a defined basis for assessing small-signal accuracy, while the 1.2 MHz gain-bandwidth product supports signal paths far below that limit. Evaluate noise, slew rate, output swing, load capability, and channel-to-channel behavior for the intended source impedance and bandwidth.

🖥️

Battery-Powered Automotive Monitoring

The LM2902QPWRQ1 can support monitoring functions in battery-powered automotive electronics, including amplification and conditioning of pressure, temperature, position, or current-sensor signals. Its 26 V maximum supply rating provides margin for a 12 V vehicle electrical environment, and AEC-Q100 qualification plus operation from -40°C to +125°C align with demanding applications. The four-channel arrangement reduces the number of amplifier packages on crowded control boards. Confirm surge, load-dump, ground-offset, and common-mode requirements at system level rather than relying on the device rating alone.

What is the LM2902QPWRQ1?
The LM2902QPWRQ1 is a Texas Instruments automotive-qualified, quad general-purpose operational amplifier with four independent amplifiers, a 26 V maximum supply rating, 1.2 MHz gain-bandwidth product, and 2 mV offset voltage. According to the Texas Instruments LM2902-Q1 product page, the device is qualified to AEC-Q100 specifications and is available in a 14-pin TSSOP package.
What are the key specifications of LM2902QPWRQ1 that engineers should know?
The LM2902QPWRQ1 combines four operational amplifiers in a 14-pin TSSOP package, with a maximum supply voltage of 26 V, a gain-bandwidth product of 1.2 MHz, and an input offset voltage of 2 mV. Texas Instruments specifies an operating temperature range of -40°C to +125°C for this automotive-qualified ordering option. The four channels can operate independently for signal conditioning, filtering, sensing, or feedback-control functions.
Where can I download the LM2902QPWRQ1 datasheet PDF?
The LM2902QPWRQ1 datasheet and ordering information are available through the Texas Instruments LM2902-Q1 product page linked on this page. The device belongs to the LM2902-Q1 family, whose official description identifies it as an automotive quad operational amplifier with a 26 V supply limit, 1.2 MHz bandwidth, and 2 mV offset voltage. Use the manufacturer pin-description table to verify the 14-pin TSSOP footprint before layout release.
Where can I find the LM2902QPWRQ1 pinout?
The LM2902QPWRQ1 pinout is defined in the Texas Instruments datasheet for the LM2902-Q1 family and its 14-pin PW TSSOP package. Use the manufacturer pin-description table to assign each amplifier channel, supply pin, and ground connection on the PCB. The retrieved product listing confirms the 14-pin TSSOP configuration, but it does not reproduce every terminal name, so the original pin table should control the schematic and footprint.
Is the LM2902QPWRQ1 suitable for automotive applications?
Yes, the LM2902QPWRQ1 is suitable for automotive applications because Texas Instruments identifies the LM2902-Q1 family as qualified to AEC-Q100 specifications. The specific LM2902QPWRQ1 ordering option supports temperatures from -40°C to +125°C and is packaged in a 14-pin TSSOP. AEC-Q100 qualification addresses automotive quality requirements, while the complete system must still meet its own electrical, environmental, and functional-safety requirements.
Where to buy LM2902QPWRQ1 online?
Use the Request a Quote form on this page to request LM2902QPWRQ1 availability, order confirmation, and an appropriate shipment plan. The part is identified as a Texas Instruments 14-pin TSSOP automotive quad operational amplifier with a 26 V maximum supply, 1.2 MHz gain-bandwidth product, and 2 mV offset voltage. The quote form allows the exact ordering option and required quantity to be reviewed before an order is placed.
What is the price of LM2902QPWRQ1?
The LM2902QPWRQ1 price depends on quantity, order status, and current component availability. Use the Request a Quote form on this page for the applicable unit pricing and quantity-break review. The part is a Texas Instruments automotive-qualified quad operational amplifier in a 14-pin TSSOP package with a 26 V supply rating, 1.2 MHz bandwidth, and 2 mV offset voltage.
What is the lead time for LM2902QPWRQ1?
Request the current lead time through the Request a Quote form on this page so the response can reflect the requested quantity and order status. Texas Instruments identifies LM2902QPWRQ1 as a 14-pin TSSOP automotive quad operational amplifier, but current scheduling must be confirmed at order entry. Include the production forecast and target shipment date in the request.
Is LM2902QPWRQ1 in stock?
Confirm current LM2902QPWRQ1 inventory through the Request a Quote form on this page. The device is the Texas Instruments automotive-qualified ordering option in a 14-pin TSSOP package, rated for -40°C to +125°C operation. Stock can vary with order quantity, so provide the required quantities, target date, and any approved-source constraints when requesting availability.
LM2902QPWRQ1 vs LM2902B-Q1 - which is better for automotive signal conditioning?
Choose LM2902QPWRQ1 when the design specifically calls for the LM2902-Q1 ordering option with a 26 V supply limit, 1.2 MHz gain-bandwidth product, and 2 mV offset voltage in a 14-pin TSSOP package. The LM2902B-Q1 is a related same-family device, so its exact offset, bias-current, and qualification details should be checked in the current family datasheet before making a functional substitution.
What is the difference between LM2902QPWRQ1 and LM2902KAVQPWRQ1?
Both LM2902QPWRQ1 and LM2902KAVQPWRQ1 are identified as 14-pin TSSOP, four-circuit general-purpose operational amplifiers from Texas Instruments. The target LM2902QPWRQ1 has a stated 26 V maximum supply, 1.2 MHz gain-bandwidth product, and 2 mV offset voltage. The exact electrical distinction between the KAV suffix and the target must be verified in the ordering table because it was not stated on the product result.
When should I choose LM2902QPWRQ1 over LM2902B-Q1?
Choose LM2902QPWRQ1 when the schematic, bill of materials, and qualification records specifically identify that ordering option. Both devices belong to the Texas Instruments LM2902-Q1 family and can provide four high-gain, internally compensated amplifiers in a 14-pin TSSOP package. Select LM2902B-Q1 only after confirming its detailed DC, AC, noise, and qualification parameters remain acceptable for the intended automotive application.
Is LM2902QPWRQ1 suitable for 12V sensor signal conditioning?
The LM2902QPWRQ1 is a candidate for 12V sensor signal conditioning because it supports a maximum supply voltage of 26 V and provides four independent, internally frequency-compensated amplifiers. Verify the sensor output range, required common-mode input range, output swing, and noise performance in the current datasheet. The automotive qualification and -40°C to +125°C rating support harsh environments but do not by themselves establish signal-chain accuracy.
What can replace LM2902QPWRQ1?
The LM2902B-Q1 and LM2902BA-Q1 are same-family Texas Instruments candidates for review, and LM2902KAVQPWRQ1 is another 14-pin TSSOP ordering option identified for the same quad-amplifier class. A replacement should be accepted only after its exact pinout, supply range, offset, bandwidth, output swing, noise, temperature rating, and automotive qualification match the design requirements. PCB compatibility alone is not sufficient.
What is the best drop-in replacement for LM2902QPWRQ1?
LM2902B-Q1 is the closest same-family candidate to review because Texas Instruments groups it with LM2902-Q1 as an automotive-qualified operational-amplifier family and it is available in the same 14-pin TSSOP form. Confirm the exact ordering suffix and pin compatibility in the family datasheet before release. LM2902KAVQPWRQ1 and LM2902BA-Q1 should be treated as additional review candidates, not guaranteed drop-ins without full parameter matching.
How should LM2902QPWRQ1 be decoupled on a PCB?
Place the supply-bypass capacitors as close as practical to the LM2902QPWRQ1 supply and ground pins, and route each trace with low impedance and minimal loop area. The device contains four amplifiers sharing package-level supply connections, so inadequate decoupling can let one channel’s output transient appear across the other channels. Keep sensitive input traces away from switching nodes and use a continuous ground reference under the device where layout rules permit.

داتای سەرچاوەی ئەندازیاری بۆ LM2902QPWRQ1 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose LM2902QPWRQ1 when the design requires a four-channel general-purpose operational amplifier in a 14-pin TSSOP package, a 26 V maximum supply, 1.2 MHz gain-bandwidth product, and automotive qualification. It is a strong fit for multi-sensor conditioning, active filtering, and feedback-control circuits where four separate amplifier packages would increase board area. LM2902B-Q1 is a same-family option when its exact offset, bias-current, noise, and qualification records satisfy the design. LM2902BA-Q1 should be selected only after its detailed parameters are compared. LM2902KAVQPWRQ1 is another 14-pin TSSOP candidate, but its suffix-specific electrical differences require verification. For any substitution, confirm the exact orderable suffix, pin names, supply range, common-mode input range, output swing, stability, temperature rating, and qualification rather than relying on package size alone.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە LM2902KAVQPWRQ1 LM2902B-Q1 LM2902BA-Q1
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package TSSOP-14 (PW) TSSOP-14 (PW) - same TSSOP-14 (PW) - same TSSOP-14 (PW) - same
Amplifier Architecture High-gain, internally frequency-compensated General-purpose operational amplifier High-gain, internally frequency-compensated High-gain, internally frequency-compensated

جیاکەرەوە سەرەکییەکان

  • Combines four independent amplifiers with automotive qualification (بەراورد بەLM2902KAVQPWRQ1)
  • Matches the core LM2902-Q1 automotive family performance (بەراورد بەLM2902B-Q1)
  • Provides a specified 2 mV offset rating for design calculations (بەراورد بەLM2902BA-Q1)

تێبینییەکانی دیزاین

Place the LM2902QPWRQ1 supply-bypass capacitors directly beside the package supply and ground terminals, using the shortest practical traces and the smallest practical loop area. Because all four amplifiers share package-level supply connections, poor decoupling can couple output transients between channels. Route sensitive inputs away from switching-node copper and maintain a continuous ground reference beneath the device where the land pattern permits.

Do not treat the 26 V maximum supply rating as proof that the full 0 V to 26 V range is suitable for every input and output signal. Check the input common-mode range, output swing, slew rate, load capability, and stability in the manufacturer datasheet before fixing resistor and capacitor values. This is particularly important for 12 V automotive systems because ground offsets can move sensor signals outside the usable input range.

Assign one channel per signal path where possible and keep the four amplifier inputs away from power-conversion circuitry and high-current return paths. Use a compact ground return for each sensitive input, avoid routing inputs alongside the supply pins, and test prototype boards for oscillation with the intended source and load. The 1.2 MHz gain-bandwidth product is adequate for many low-frequency stages, but high closed-loop gain requires careful layout and stability analysis.

Estimate power dissipation from the actual amplifier quiescent current and output-stage current under the worst-case supply and load. Compare the resulting junction-temperature estimate with the -40°C to +125°C operating range and the PCB’s thermal resistance. The TSSOP package is suitable for compact designs, but copper area, airflow, nearby heat sources, and ground-plane construction determine the achievable junction temperature.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Texas Instruments identifies the LM2902-Q1 family as qualified to AEC-Q100 specifications. No additional RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified.

داتا پشتڕاستکراوەتەوە لە: 2026-11-09 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

LM2902QPWRQ1 datasheet LM2902QPWRQ1 pinout LM2902QPWRQ1 datasheet pdf LM2902QPWRQ1 equivalent LM2902QPWRQ1 replacement LM2902QPWRQ1 price LM2902QPWRQ1 stock Texas Instruments LM2902QPWRQ1 LM2902QPWRQ1 TSSOP-14 pinout LM2902QPWRQ1 automotive op amp LM2902QPWRQ1 vs LM2902B-Q1 LM2902QPWRQ1 application circuit

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments LM2902QPWRQ1 LM2902-Q1 LM2902KAVQPWRQ1 LM2902B-Q1 LM2902BA-Q1 quad operational amplifier operational amplifier linear amplifier IC analog signal processing semiconductor high-gain amplifier frequency-compensated amplifier gain-bandwidth product input offset voltage common-mode input range output swing single supply operation split supply operation TSSOP-14 PW package surface-mount package AEC-Q100 automotive electronics sensor signal conditioning
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ