LM2903VQDRG4Q1 - 36V Automotive Dual Comparator | Texas Instruments
MPN: LM2903VQDRG4Q1 ✗ کۆتایی ژیانLM2903VQDRG4Q1 گشتی
A voltage comparator is an analog integrated circuit that compares two input voltages and changes its output state when the difference crosses a selected threshold. The LM2903 family combines two independent comparators in one package, providing greater functional flexibility than a single comparator while requiring only one device. Its open-collector outputs can sink current and support wired logic, lamp drivers, or interface with pull-up resistors and external transistors.
Automotive qualification is the principal differentiator of the LM2903VQDRG4Q1. The device is qualified to AEC-Q100 Grade 0 and Grade 1, and the manufacturer documentation identifies ESD protection exceeding 1000 V under MIL-STD-883, Method 3015 and exceeding 100 V with the machine model. The dual architecture supports single-supply operation from 2 V to 36 V or split-supply operation where the total supply difference remains within the device rating.
Each channel has its own differential input pair, output, and output-strobe capability. The input common-mode range extends across the supply rails, allowing the comparator to monitor low-level sensor signals without separate input protection in many applications. Open-collector outputs avoid push-pull output contention, but they require a pull-up resistor when a logic-high output voltage is required. Typical propagation delay is listed at 0.3 microseconds for the automotive variant.
Typical uses include battery monitoring, automotive sensor conditioning, window and seat-position sensing, overvoltage detection, fan control, and industrial control modules. The dual supply capability is useful in systems with positive and negative rails, while the wide single-supply range accommodates 5 V, 12 V, and 24 V automotive electrical environments. The device should be paired with input filtering where noisy signals could cause repeated output transitions.
Layout and stability require attention near the supply pins. Place the supply bypass capacitor close to pin 8 and the ground connection close to pin 4, keep comparator inputs away from output and supply traces, and connect open-collector pull-ups to a compatible logic rail. Check absolute maximum voltage limits, input common-mode range, output-current capability, and the pull-up voltage before finalizing the external circuit.
This page combines automotive qualification, operating limits, package details, lifecycle information, and drop-in family alternatives with practical PCB and application guidance. It is intended to help engineers select or replace the LM2903VQDRG4Q1 in 8-pin SOIC designs while accounting for supply architecture, output loading, and automotive qualification requirements.
جێگرەوەکانی جێگۆڕکێ بۆ LM2903VQDRG4Q1 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM2903VQDRG4Q1 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Output Type, Comparator Type, Supply Current, Dual-Supply Operating Range.
LM2903QDRG4Q1
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2903QDRQ1
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2903AVQDRG4Q1
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2903VQDRG4
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2903QDRQ1
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2903VQDRG4Q1 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Comparator Type | Dual differential voltage comparator |
| Number of Independent Channels | 2 channels |
| Single-Supply Operating Range | 2 V to 36 V |
| Dual-Supply Operating Range | ±1 V to ±18 V |
| جۆری دەرچوون | Open-collector, rail-to-rail |
| ئێستای دابینکردن | 0.4 mA typical per comparator |
| Propagation Delay | 0.3 us |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 |
| ESD Protection, Human Body Model | Exceeds 1000 V per MIL-STD-883, Method 3015 |
| ESD Protection, Machine Model | Exceeds 100 V with C = 200 pF |
| پاکێج | 8-SOIC, 3.90 mm width |
| جۆری دامەزراندن | Surface mount |
| Operating Mode | Single supply or dual supplies |
| Supply Voltage Difference for Dual Operation | 2 V to 36 V |
| Minimum VCC for Dual-Supply Operation | 1.5 V above the midpoint |
| Production Status | No longer in production |
| Packaging | Tape and reel |
ڕێکخستنی پینی LM2903VQDRG4Q1
| پین 1 | OUT1 — Open-collector output of comparator channel 1 |
| پین 2 | IN1- — Inverting input of comparator channel 1 |
| پین 3 | IN1+ — Non-inverting input of comparator channel 1 |
| پین 4 | GND — Ground connection or negative supply in split-supply operation |
| پین 5 | IN2+ — Non-inverting input of comparator channel 2 |
| پین 6 | IN2- — Inverting input of comparator channel 2 |
| پین 7 | OUT2 — Open-collector output of comparator channel 2 |
| پین 8 | VCC — Positive supply voltage input |
بەکارهێنانە باوەکان
LM2903VQDRG4Q1 گونجاوە بۆ 8 بەکارھێنانs: Automotive Battery Threshold Monitoring, Automotive Sensor Signal Conditioning, Overvoltage and Undervoltage Protection, Window Lift and Seat Position Detection, LED and Lamp Driver Control, Industrial Control and Robotics Interfaces, Power Supply Fault Detection, Level Shifting and Differential Sensing.
Automotive Battery Threshold Monitoring
The LM2903VQDRG4Q1 suits 12 V and 24 V automotive battery systems because it operates from 2 V to 36 V and is AEC-Q100 Grade 0 and Grade 1 qualified. Two independent channels can monitor separate divided battery voltages, such as overvoltage and undervoltage conditions. Each open-collector output can directly drive a pull-up network or an external switching transistor. The rail-to-rail inputs are useful when a resistor divider approaches either supply rail, while the 0.4 mA typical current per comparator supports low standby demand.
پێشنیارکراو
Automotive Sensor Signal Conditioning
The LM2903VQDRG4Q1 converts low-level differential sensor signals into a logic-level decision for a body, chassis, or powertrain controller. Its rail-to-rail input range allows comparison against a precision reference derived from the vehicle rail. The 0.3 us typical propagation delay supports faster threshold decisions than slow general-purpose sensor conditioning stages. Use a pull-up on each open-collector output and route the inputs away from switching nodes to avoid false transitions from conducted or radiated noise.
پێشنیارکراو
Overvoltage and Undervoltage Protection
Two separate LM2903VQDRG4Q1 channels can implement upper and lower rail-limit detection in power-control modules. The 2 V to 36 V operating range covers regulated 5 V, 12 V, and 24 V systems plus transient-conditioned rails. Rail-to-rail inputs simplify divider selection around the supply limits, and the open-collector outputs provide a flexible fault indication that can be pulled up to a logic rail or connected to an isolation device. Add external surge protection where the raw battery rail can exceed the comparator limits.
پێشنیارکراو
Window Lift and Seat Position Detection
The LM2903VQDRG4Q1 can compare motor position, hall-sensor, or potentiometer-derived signals in automotive body systems. Its two independent channels reduce component count when one channel tracks a reference and the other evaluates the variable input. The wide supply range supports direct operation from vehicle rails after appropriate conditioning, while AEC-Q100 Grade 0 and Grade 1 qualification supports harsh-temperature requirements. Place input traces away from motor and relay power paths, and use filtering to suppress inductive spikes.
پێشنیارکراو
LED and Lamp Driver Control
The open-collector outputs of the LM2903VQDRG4Q1 can control an external P-channel or N-channel transistor that switches lamps, indicators, or status LEDs. This avoids placing the full lamp current through the comparator output and allows the load to use a supply different from the logic pull-up rail. A pull-up resistor establishes the inactive output level, while the external transistor provides the current margin. Verify transistor voltage and current ratings against transient requirements in the final vehicle load circuit.
پێشنیارکراو
Industrial Control and Robotics Interfaces
The LM2903VQDRG4Q1 is useful in industrial controllers that need a robust dual threshold detector for end stops, position switches, or analog sensor crossings. The 2 V to 36 V single-supply range accommodates 5 V logic and higher industrial rails, while the low 0.4 mA typical current per channel suits power-constrained remote modules. Both channels have independent outputs, allowing two sensors to be evaluated with one package. Industrial designs should still protect inputs against transients and account for the device temperature grade selected.
پێشنیارکراو
Power Supply Fault Detection
The LM2903VQDRG4Q1 can monitor a 12 V or 24 V supply and a secondary rail in power-management modules. One channel detects loss of an enable or auxiliary rail, and the other detects overvoltage or an out-of-range condition. Open-collector outputs suit fault-bus implementations with pull-up resistors and can remain latched through external logic. Because automotive electrical environments include load dump and inductive transients, use divider impedance and clamp components so every pin remains within its absolute maximum rating.
پێشنیارکراو
Level Shifting and Differential Sensing
The LM2903VQDRG4Q1 supports low-voltage differential sensing where the two inputs move around a biased common-mode voltage. Rail-to-rail input behavior allows both inputs to approach the supply limits, making the channels suitable for bridge, current-sense, and trip-point circuits. The open-collector output can drive a pulled-up digital input or an analog downstream stage. Keep the sense path short, use a matched reference divider, and avoid routing the input pair beneath switching regulators or high-current outputs.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LM2903VQDRG4Q1 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LM2903QDRG4Q1 | LM2903QDRQ1 | LM2903AVQDRG4Q1 | LM2903VQDRG4 | LM2903QDR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-SOIC | 8-SOIC - same | 8-SOIC - same | 8-SOIC - same | 8-SOIC - same | 8-SOIC - same |
| Comparator Channels | 2 independent channels | 2 independent channels | 2 independent channels | 2 independent channels | 2 independent channels | 2 independent channels |
| Single-Supply Voltage Range | 2 V to 36 V | 2 V to 36 V | 2 V to 36 V | 2 V to 36 V | 2 V to 36 V | 2 V to 36 V |
| Dual-Supply Voltage Range | ±1 V to ±18 V | ±1 V to ±18 V | ±1 V to ±18 V | ±1 V to ±18 V | ±1 V to ±18 V | ±1 V to ±18 V |
| Output Type | Open-collector, rail-to-rail | Open-collector, rail-to-rail | Open-collector, rail-to-rail | Open-collector, rail-to-rail | Open-collector, rail-to-rail | Open-collector, rail-to-rail |
| Supply Current per Comparator | 0.4 mA typical | 0.4 mA typical | 0.4 mA typical | 0.4 mA typical | 0.4 mA typical | 0.4 mA typical |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | Standard non-V-grade ordering | Q1 family ordering; verify grade | Automotive-family A variant; verify grade | Non-Q1 suffix | Standard commercial ordering |
جیاکەرەوە سەرەکییەکان
- Automotive-grade qualification in the dual-comparator footprint (بەراورد بەLM2903QDRG4Q1)
- Wide automotive supply range with two independent channels (بەراورد بەLM2903QDR)
- Qualified grade coverage for harsh-temperature designs (بەراورد بەLM2903VQDRG4)
تێبینییەکانی دیزاین
Place the supply bypass capacitor close to pin 8 and connect the ground return near pin 4 with a short, low-inductance path. Keep the two differential input pairs away from output traces, relay drivers, and switching-converter power nodes. When a sensor cable enters the board, terminate it with input filtering near the comparator so conducted transients are attenuated before reaching the threshold inputs.
The open-collector output does not source a logic-high current, so every output requires a pull-up resistor unless it drives an external transistor or another open-collector load. Verify the pull-up voltage against the output rating and the resistor value against the required sink current. Also do not assume that all LM2903 suffixes are automotive qualified: the V and Q1 order codes must be retained when the system requires AEC-Q100 Grade 0 or Grade 1 qualification.
Although the device accepts a broad supply range, raw automotive battery inputs can experience transients beyond the 2 V to 36 V operating specification. Use divider impedance, clamp devices, and series impedance selected for the vehicle network. In dual-supply operation, maintain a supply difference of 2 V to 36 V and keep the positive rail at least 1.5 V above the supply midpoint as stated in the manufacturer comparison information.
Comparators near their threshold amplify noise as well as the intended signal. Use matched, low-tolerance resistor dividers for the reference input and route the input pair as a short differential pair. Add hysteresis with positive feedback when the input can cross the threshold slowly or noisily. Check the output transition rate in the intended load because a large pull-up capacitance can lengthen the falling edge even though the nominal propagation delay is 0.3 us.
زانیاری پابەندبوون
Texas Instruments identifies the LM2903-Q1 family as AEC-Q100 Grade 0 and Grade 1 qualified. ESD ratings exceed 1000 V per MIL-STD-883, Method 3015 and exceed 100 V using the machine model. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the available product information.