LM2904LVQDRQ1 - 5.5V Dual 1MHz Op Amp | Texas Instruments
MPN: LM2904LVQDRQ1 ✓ چالاکLM2904LVQDRQ1 گشتی
An operational amplifier, or op amp, is a voltage-feedback amplifier used to increase signal amplitude, buffer inputs, implement active filters, and regulate feedback loops. Within the semiconductor hierarchy, the LM2904LV-Q1 belongs to the operational-amplifier, analog-amplifier, and signal-conditioning IC categories. Its low-voltage supply operation distinguishes it from conventional high-voltage LM2904 devices while retaining the familiar dual-channel pin arrangement.
The LM2904LV-Q1 family is specified for low-voltage operation from 2.7 V to 5.5 V. Its 1 MHz gain-bandwidth product supports general-purpose closed-loop amplification at relatively low frequencies. The 3 mV offset specification improves DC accuracy in applications where input bias and offset errors influence the output. Two amplifiers are integrated in one 8-pin SOIC, reducing board area while providing independent channels for complementary signal paths.
This device is intended for cost-sensitive, low-voltage systems that still require automotive-grade temperature qualification and robust general-purpose performance. The dual configuration can implement two noninverting amplifiers, two voltage followers, differential signal conditioning, or independent error-amplifier functions. Because it is not rail-to-rail, input and output common-mode ranges must remain within the device's specified operating limits when supplies are restricted.
Typical uses include automotive sensor interfaces, body and comfort-system signal conditioning, low-voltage control loops, current sensing with external resistors, active filters, and general industrial modules operating from 2.7 V or 3.3 V rails. A 5 V system can use the full 5.5 V maximum supply while retaining appropriate design margin for supply variation and transient behavior.
When laying out the circuit, keep input and feedback traces short, provide local supply bypassing, and avoid placing long routes beside high-current switching nodes. Check the common-mode input range at the actual signal amplitude and ensure that output swing remains below the output-current and supply-voltage limits. Decoupling capacitors should connect directly to the supply and ground pins rather than through shared narrow traces.
This product page combines the manufacturer specifications with practical design guidance, package-level comparisons, application examples, and available drop-in alternatives. It supports faster component selection for engineers who need a dual, low-voltage, automotive operational amplifier in the standard 8-pin SOIC footprint.
جێگرەوەکانی جێگۆڕکێ بۆ LM2904LVQDRQ1 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM2904LVQDRQ1 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Maximum Supply Voltage, Automotive Qualification, Number of Channels, Gain-Bandwidth Product.
LM2904DG4
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2904LVQDR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LM2904LVQDDARQ1
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LM2904LVQDRQ1 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Amplifier Type | General-purpose operational amplifier |
| Number of Channels | 2 channels |
| Number of Amplifiers | 2 amplifiers |
| Maximum Supply Voltage | 5.5 V |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Gain-Bandwidth Product | 1 MHz |
| Output Offset Voltage | 3 mV |
| Automotive Qualification | Automotive grade |
| پاکێج | 8-pin SOIC |
| جۆری دامەزراندن | Surface mount |
| دۆخی RoHS | Compliant |
ڕێکخستنی پینی LM2904LVQDRQ1
| پین 1 | OUT1 — Amplifier 1 output |
| پین 2 | IN1- — Amplifier 1 inverting input |
| پین 3 | IN1+ — Amplifier 1 noninverting input |
| پین 4 | V- — Negative supply connection |
| پین 5 | IN2+ — Amplifier 2 noninverting input |
| پین 6 | IN2- — Amplifier 2 inverting input |
| پین 7 | OUT2 — Amplifier 2 output |
| پین 8 | V+ — Positive supply connection |
بەکارهێنانە باوەکان
LM2904LVQDRQ1 گونجاوە بۆ 6 بەکارھێنانs: Automotive Sensor Signal Conditioning, Low-Voltage Error Amplifier, Active Audio Signal Conditioning, Current-Shunt Amplifier, Industrial Control and Monitoring, Buffering and Active Filtering.
Automotive Sensor Signal Conditioning
The LM2904LVQDRQ1 is suited to conditioning low-voltage automotive sensor signals because its dual channels can process two related inputs without doubling the package count. With a 2.7 V to 5.5 V operating range, the amplifier can operate from 3.3 V or 5 V vehicle electronics rails while providing a 1 MHz gain-bandwidth product and 3 mV offset specification. Its automotive-grade ordering designation makes it appropriate for qualified vehicle designs, subject to confirming the full temperature and qualification requirements in the manufacturer datasheet.
پێشنیارکراو
Low-Voltage Error Amplifier
The LM2904LVQDRQ1 can implement one half of a feedback-control loop as a low-voltage error amplifier. Its 1 MHz gain-bandwidth product is useful for loops that do not require high-speed correction, while the 3 mV offset specification influences the accuracy of the amplifier's zero-crossing behavior. The second channel can independently amplify a feedback or monitoring signal. Design the compensation network around the actual closed-loop gain and verify stability across its 2.7 V to 5.5 V supply range.
پێشنیارکراو
Active Audio Signal Conditioning
The two channels in the LM2904LVQDRQ1 can form preamplifier or active-filter stages for low-frequency audio signals supplied from a 2.7 V to 5.5 V source. A 1 MHz gain-bandwidth product permits useful closed-loop bandwidth, although higher-gain configurations reduce usable bandwidth according to the standard gain-bandwidth relationship. The 3 mV output offset specification is especially relevant when processing near-DC audio information or implementing active low-frequency filters. Confirm output swing and common-mode limits before choosing the gain and supply voltage.
پێشنیارکراو
Current-Shunt Amplifier
The LM2904LVQDRQ1 can amplify the voltage generated by a current-sense shunt when the source remains within the amplifier's common-mode input range. One channel may provide gain, while the other can monitor the same rail or perform an independent buffer function. The 3 mV offset specification contributes directly to the uncertainty of the measured shunt voltage, making input-bias-current and offset-temperature effects important in precision measurements. Use a low-value shunt, Kelvin routing, and a supply selected to provide adequate output headroom.
پێشنیارکراو
Industrial Control and Monitoring
The LM2904LVQDRQ1 is appropriate for compact industrial control boards that generate 3.3 V or 5 V analog signals and need two general-purpose amplifier channels. It can buffer sensor outputs, amplify control-loop errors, or create independent gain stages for monitoring and actuation. The 2.7 V to 5.5 V supply range supports low-voltage embedded systems, while the 1 MHz bandwidth handles many slow control signals. Industrial temperature exposure and electromagnetic conditions should be checked separately because the exact operating-temperature limits are not stated on the product summary.
پێشنیارکراو
Buffering and Active Filtering
The dual LM2904LVQDRQ1 can serve as two voltage followers or as the active elements in first-order and higher-order low-frequency filters. Voltage following avoids loading the source and can isolate an upstream sensor from a downstream converter or measurement stage. For active-filter designs, the 1 MHz gain-bandwidth product and 3 mV offset specification influence usable frequency range and DC accuracy. Keep resistor networks physically close to the relevant amplifier pins, provide local supply bypassing, and verify phase margin under the intended load condition.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LM2904LVQDRQ1 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LM2904DG4 | LM2904LVQDR | LM2904LVQDDARQ1 |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Number of Channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.5 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Maximum Supply Voltage | 5.5 V | 5.5 V | 5.5 V | 5.5 V |
جیاکەرەوە سەرەکییەکان
- Defined low-voltage operating range (بەراورد بەLM2904DG4)
- Automotive-grade ordering option (بەراورد بەLM2904LVQDR)
- Two channels in one standard footprint (بەراورد بەLM2904LVQDDARQ1)
تێبینییەکانی دیزاین
Place the supply bypass capacitor immediately across pins 8 and 4, with a short return path to the ground reference. Keep amplifier input pins 2, 3, 5, and 6 away from switching nodes and high-current return paths. Route each feedback resistor close to its associated output and input, and avoid shared copper geometry between sensitive analog signals and digital return currents.
Verify the actual signal amplitude against the input common-mode range and confirm that the required output swing remains achievable with the selected load. The device is not specified as rail-to-rail, so a nominal 3.3 V or 5 V supply does not permit every possible input and output voltage. For precision shunt measurements, use Kelvin routing and account for the specified 3 mV output offset when calculating total measurement uncertainty.
Do not treat an 8-pin SOIC footprint match as proof that every LM2904-family ordering code is interchangeable. The LM2904DG4 comparison lists a 2.5 V minimum supply, while the LM2904LVQDRQ1 operates from 2.7 V to 5.5 V. Confirm offset voltage, bandwidth, input and output ranges, operating temperature, qualification, and stability requirements against the manufacturer datasheet before approving a substitution.
زانیاری پابەندبوون
The distributor record identifies the device as automotive grade and RoHS compliant. Explicit REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not identified.