LM2904MX/NOPB - Dual 26V 700kHz Op Amp | Texas Instruments
MPN: LM2904MX/NOPB ✓ چالاکLM2904MX/NOPB گشتی
An operational amplifier is a voltage-gain amplifier whose closed-loop behavior is determined mainly by external feedback components. The LM2904 belongs to the dual general-purpose operational-amplifier family, combining two amplifier channels in one package. This integration reduces board area compared with two discrete single amplifiers and simplifies dual-channel designs requiring common supply voltage and similar operating characteristics.
The manufacturer identifies the LM2904 as a low-power, dual operational-amplifier family for general-purpose applications. Its 26 V maximum supply rating supports higher-voltage analog systems than many low-voltage rail-to-rail amplifiers, while the 700 kHz gain-bandwidth product provides useful bandwidth for control, sensing, buffering, and signal-conditioning tasks. The 8-SOIC package offers a conventional surface-mount footprint that is practical for both new designs and upgrades of existing 8-pin amplifier boards.
The MX ordering code denotes the manufacturer's SOIC package option, while /NOPB identifies the lead-free, non-PB-free finish. The 8-SOIC format is useful for prototypes, repair assemblies, and industrial equipment requiring a stable package outline. Designers should consult the manufacturer datasheet for the complete electrical limits, input/output characteristics, supply-current behavior, compensation information, pin assignments, and recommended operating conditions before releasing a production design.
Typical LM2904 applications include two-channel sensor amplification, transducer-signal conditioning, low-frequency active filtering, voltage comparison, analog control loops, and general instrumentation. In these applications, the device can amplify signals from sensors, provide gain around analog front ends, or drive feedback networks when the operating range and load capability meet the circuit requirements. The dual channel can also implement differential or complementary stages where the two amplifiers operate within the same supply system.
The primary design consideration is ensuring that the input common-mode range, output swing, supply voltage, noise, offset, and stability remain suitable for the application. Bypass capacitors should be placed close to the supply pins, while input, feedback, and compensation components should be positioned to minimize parasitic capacitance and unwanted feedback. Because the package exposes both amplifier channels, grounding and return-current paths should be planned to avoid coupling between the two signal paths.
This product record combines the manufacturer specifications with package details, application-oriented guidance, technical comparison criteria, and verified sourcing references. It also distinguishes genuine same-footprint alternatives from broader functional equivalents, helping engineers make a board-level replacement decision while recognizing that electrical equivalence must be confirmed against the complete manufacturer datasheet.
جێگرەوەکانی جێگۆڕکێ بۆ LM2904MX/NOPB — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM2904MX/NOPB (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Amplifier Type, Slew Rate, Input Offset Voltage, Number of Amplifiers.
LM2904M/NOPB
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2904BIDR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2904D
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2904BIDR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2904BA
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LM2904MX/NOPB زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Circuits | 2 circuits |
| Maximum Supply Voltage | 26 V |
| Gain-Bandwidth Product | 700 kHz |
| پاکێج | 8-SOIC |
| جۆری دامەزراندن | Surface mount |
| Lead-Free Finish | Non-PB-free finish indicated by /NOPB |
ڕێنمایی ڕێکخستنی پینی LM2904MX/NOPB 8-soic
ڕێکخستنی پین بۆ LM2904MX/NOPB (پاکێجی 8-soic). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LM2904MX/NOPB.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LM2904MX/NOPB گونجاوە بۆ 6 بەکارھێنانs: Dual Sensor Signal Conditioning, Industrial Control Signal Conditioning, Active Filtering and Audio Preamplification, Voltage Comparison and Threshold Detection, Power Supply Current Monitoring, Test and Measurement Buffering.
Dual Sensor Signal Conditioning
The LM2904MX/NOPB fits dual sensor front ends where two low-frequency channels must amplify small signals before conversion or control. Its two channels in one 8-SOIC package reduce board area, while the 700 kHz gain-bandwidth product supports moderate-bandwidth instrumentation rather than only DC buffering. The 26 V maximum supply rating also allows operation from higher-voltage analog systems when the individual signal remains inside the amplifier's input and output ranges. For a transducer bridge, the channels can serve as gain stages, differential amplifiers, or active-filter elements. Verify offset, bias current, input common-mode range, output swing, and noise against the sensor excitation and signal levels before fixing the external resistor values.
پێشنیارکراو
Industrial Control Signal Conditioning
LM2904MX/NOPB is appropriate for low-frequency industrial control blocks that condition pressure, temperature, position, or current-sensor outputs before an ADC or controller input. Two amplifier channels can implement gain and filtering without requiring two separate amplifier packages. The 700 kHz gain-bandwidth product is well suited to loops that do not demand high-speed settling, while the 26 V maximum supply rating supports headroom above common low-voltage rails. Place short feedback paths close to the device and keep sensor returns separated from switching-node returns to reduce error. Confirm operating temperature, input bias current, offset voltage, common-mode limits, and load drive against the industrial environment before production release.
پێشنیارکراو
Active Filtering and Audio Preamplification
The LM2904MX/NOPB can implement active low-pass, high-pass, or band-pass sections where two amplifier channels provide matched gain stages for modest-frequency signals. Its 700 kHz gain-bandwidth product permits useful closed-loop bandwidth in audio-band and control-band networks when the noise gain is kept reasonable. The device is not positioned as a high-precision low-noise audio amplifier, so input offset, bias current, distortion, and output loading should be evaluated against the required signal-to-noise performance. Use resistor and capacitor values from the manufacturer's stability guidance, especially with high source impedance. A common-ground layout and short feedback loops will improve channel-to-channel consistency and reduce parasitic coupling.
پێشنیارکراو
Voltage Comparison and Threshold Detection
LM2904MX/NOPB works well in dual comparator-style threshold circuits where open-loop behavior is intentionally used for fast decisions rather than linear precision amplification. One channel can monitor a sensor or supply threshold while the other handles a second reference or interlock condition. The 26 V maximum supply rating permits higher input thresholds than many modern low-voltage amplifiers, but the input common-mode range must include the selected threshold. Account for input offset when defining safety margins and verify output voltage levels against the logic family being driven. Stable reference components, a defined return path, and hysteresis are important for preventing repeated switching near the threshold.
پێشنیارکراو
Power Supply Current Monitoring
A low-side or high-side shunt-monitoring circuit can use one LM2904MX/NOPB channel to amplify a small voltage across a current-sense element while the second channel handles midpoint reference or offset correction. The 700 kHz gain-bandwidth product is useful for control and protection signals that require modest bandwidth, and the dual package can simplify implementation around a power module. The amplifier's supply and input limits must be compatible with the monitored voltage, including transients and common-mode excursions. Check offset and bias-current errors against the smallest current that must be resolved, and use Kelvin routing where shunt accuracy is important. Confirm thermal conditions at the amplifier because the 8-SOIC dissipation depends on supply voltage and output loading.
پێشنیارکراو
Test and Measurement Buffering
LM2904MX/NOPB can buffer medium-impedance test nodes, provide gain for instrumentation channels, and form the two sides of a differential measurement stage. Its 700 kHz gain-bandwidth product accommodates many low-to-moderate frequency measurements, while dual-channel packaging allows symmetrical channel implementation. Buffering benefits from the amplifier's input and output characteristics, but capacitance at the source node can affect stability, so include the complete source impedance in simulation. Keep input leads short, use a low-noise ground reference, and avoid sharing sensitive return paths with digital switching currents. Verify output drive into the selected instrument or acquisition input and account for offset when interpreting low-level measurements.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LM2904MX/NOPB — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LM2904M/NOPB | LM2904BIDR | LM2904D | LM2904B | LM2904BA |
|---|---|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Amplifier Configuration | Dual | Dual | Dual | Dual | Dual | Dual |
| Special Feature | Low-power general-purpose dual amplifier | LM2904 family variant | LM2904 revision | LM2904 package variant | LM2904 revised family option | LM2904 revised family option |
جیاکەرەوە سەرەکییەکان
- Dual general-purpose channels in a compact 8-SOIC package (بەراورد بەLM2904M/NOPB)
- 26 V maximum supply rating supports higher-voltage analog systems (بەراورد بەLM2904BIDR)
- 700 kHz gain-bandwidth product targets moderate-frequency signal processing (بەراورد بەLM2904D)
تێبینییەکانی دیزاین
Place the supply-bypass capacitor directly between the power and ground pins, keeping its loop short and away from high-current switching paths. Route both amplifier channels with independent signal returns where possible, and keep feedback components close to the corresponding amplifier pins. For sensitive low-level signals, use a quiet ground plane and separate the analog return from motor, relay, and power-converter return currents.
Do not assume that the 26 V maximum supply rating makes every input or output level safe. Confirm that the sensor voltage remains inside the input common-mode range and that the requested output remains inside the output swing under the actual load. Also account for input offset and bias-current errors when the source impedance is high. These checks are especially important during a direct LM2904 family substitution.
Evaluate stability with the real source impedance, load capacitance, feedback network, and external compensation. Long breadboard leads or sockets can add enough capacitance to alter closed-loop behavior. For high-frequency or precision designs, favor a short PCB implementation and verify settling, output swing, distortion, and channel-to-channel behavior using the manufacturer's test conditions.
Estimated: power dissipation is approximately PD = (VIN - VOUT) × IOUT plus supply and output-stage contributions. For example, 12 V input, 5 V output, and 10 mA load produce about 70 mW in the output path. Confirm the actual supply, load, ambient temperature, and 8-SOIC thermal resistance before treating this estimate as a complete thermal design.
زانیاری پابەندبوون
The /NOPB suffix identifies a non-PB-free finish, but no target-part RoHS, REACH, halogen-free, or conflict-minerals declaration was identified. Automotive qualification is not claimed for this ordering option.