Texas Instruments

LM2904VQPWRG4Q1 - Dual 26V 700kHz Op Amp | Texas Instruments

MPN: LM2904VQPWRG4Q1 ✓ چالاک
26 V maximum Vdss 0.7 mA typical Id 8-pin TSSOP Package Yes, one compensated amplifier per channel Speed
MOQ: 1 |

LM2904VQPWRG4Q1 گشتی

Texas Instruments LM2904VQPWRG4Q1 is an AEC-Q100-qualified, dual general-purpose operational amplifier rated for 26 V total supply operation, with two independent, internally frequency-compensated amplifier channels in an 8-pin TSSOP package. Each channel supports single-supply operation from 3 V to 26 V and split-supply operation when the total supply difference is between 3 V and 26 V. The device operates at a gain-bandwidth product of 700 kHz while drawing a typical supply current of 0.7 mA.

An operational amplifier is an analog signal-conditioning semiconductor that amplifies the voltage difference between its differential inputs. The LM2904 family belongs to the broader hierarchy of operational amplifier, analog amplifier, signal-conditioning IC, and semiconductor. Its two independent channels allow one package to process two signals, reducing board area in automotive and industrial control systems without requiring separate single-channel amplifier packages.

The principal features include two independent high-gain amplifiers, internal frequency compensation, a common-mode input range that includes ground, and operation from a single or split supply. The common-mode capability permits direct sensing near ground, which is useful when signals originate from sensors referenced to the same ground as the amplifier. The 700 kHz gain-bandwidth product supports general-purpose gain and signal-conditioning stages without requiring a high-speed amplifier architecture.

The architecture is optimized for stable operation in non-inverting and inverting amplifier configurations. Internal frequency compensation removes the need for an external compensation network in ordinary closed-loop designs. Because the two amplifiers are independent rather than electrically linked, each channel can use a different feedback network and input signal. This flexibility makes the dual package suitable for paired sensor channels, control-loop elements, buffer stages, and signal-conditioning blocks.

Typical automotive and industrial applications include body and comfort controls, actuator and sensor interfaces, motor-control support circuits, power-supply monitoring, and low-frequency analog signal conditioning. Split-supply operation is useful in circuits centered around ground, while single-supply operation simplifies systems whose signal range begins at 0 V. The TSSOP package also supports compact board layouts where two amplifier channels are required.

Design the circuit around the common-mode and output-voltage limits of the selected amplifier configuration. Check that both input signals remain inside the common-mode range, including ground, and that the feedback network does not request an output beyond the selected supply range. Place the feedback components close to the device pins, maintain short input paths, and provide adequate return-current paths to reduce coupling from switching circuitry.

This page combines manufacturer product information, automotive qualification details, package information, and application-oriented engineering guidance. It also highlights same-footprint family alternatives and the distinctions that matter when evaluating an automotive dual operational amplifier for a new control or sensor-conditioning design.

جێگرەوەکانی جێگۆڕکێ بۆ LM2904VQPWRG4Q1 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM2904VQPWRG4Q1 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Amplifier Type.

Texas Instruments
Amplifier Type: Dual general-purpose operational amplifier
بەراوردکردن لەگەڵ LM2904VQPWRG4Q1 →

LM2904VQPWRQ1

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 8-pin TSSOP
Dual general-purpose operational amplifier · 2 circuits · 26 V · 3 V to 32 V · 700 kHz · AEC-Q100 qualified · -40°C to +125°C · TSSOP (PW)

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LM2904BVQPWRQ1

✅ جێگرەوەی ڕاستەوخۆ
📦 8-pin TSSOP
Next-generation LM2904B-Q1 family with upgraded functionality and 36 V operating voltage, about 38% higher than the target's 26 V limit

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

LM2904BAVQPWRQ1

✅ جێگرەوەی ڕاستەوخۆ
📦 8-pin TSSOP
Next-generation LM2904BA-Q1 family with upgraded functionality and 36 V operating voltage, about 38% higher than the target's 26 V limit

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

LM2904VQPWRG4Q1 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Number of Amplifier Channels 2 channels
Amplifier Type General-purpose operational amplifier
Total Supply Voltage 26 V maximum
Single-Supply Operating Range 3 V to 26 V
Split-Supply Operating Range 3 V to 26 V total supply difference
Maximum Split-Supply Magnitude +13 V or -13 V
Gain-Bandwidth Product 700 kHz
ئێستای دابینکردن 0.7 mA typical
Common-Mode Input Range Includes ground
Internal Frequency Compensation Yes, one compensated amplifier per channel
Automotive Qualification AEC-Q100 qualified
پاکێج 8-pin TSSOP
جۆری دامەزراندن Surface mount
Packing Style Tape and reel
Channel Independence Two independent amplifiers

ڕێنمایی ڕێکخستنی پینی LM2904VQPWRG4Q1 8-pin tssop

ڕێکخستنی پین بۆ LM2904VQPWRG4Q1 (پاکێجی 8-pin tssop). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 8-pin tssop بۆ LM2904VQPWRG4Q1

هیچ داتای وردی پینئاوت بەردەست نییە بۆ LM2904VQPWRG4Q1.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

LM2904VQPWRG4Q1 گونجاوە بۆ 6 بەکارھێنانs: Automotive Sensor Signal Conditioning, Body and Comfort Control Interfaces, Motor Control Support Circuits, Industrial 24V Control Systems, Power-Supply Monitoring and Feedback, Low-Frequency Instrumentation Amplification.

🚗

Automotive Sensor Signal Conditioning

The LM2904VQPWRG4Q1 fits dual automotive sensor-conditioning channels because it combines two independent amplifiers with a 700 kHz gain-bandwidth product and an AEC-Q100-qualified family designation. Each channel can amplify a low-frequency sensor signal referenced close to ground, while the common-mode input range includes 0 V for direct sensing near the lower supply rail. Its 26 V maximum total supply supports automotive battery-system environments when the transient and absolute-maximum requirements of the complete design are controlled. Two separate feedback networks can also provide different gains for paired sensors without adding another package.

🚗

Body and Comfort Control Interfaces

The LM2904VQPWRG4Q1 is appropriate for body and comfort-control interfaces where two low-frequency analog channels must be processed in a compact package. Its two independent, internally compensated channels can serve as non-inverting amplifiers, inverting amplifiers, or buffer stages with separate feedback networks. The 700 kHz bandwidth is adequate for many slow control and actuator signals, while the 0.7 mA typical supply current supports power-conscious control modules. Automotive use should follow the LM2904-Q1 qualification details and the system's transient-suppression requirements.

🏭

Motor Control Support Circuits

The LM2904VQPWRG4Q1 can provide current-feedback, voltage-amplification, or signal-shaping functions around a motor-control system while operating from a single or split supply. Its two independent channels allow a controller to amplify one feedback quantity and another reference or monitoring signal. The common-mode input range including ground is valuable for sensing signals that approach 0 V, and internal frequency compensation simplifies conventional closed-loop design. Input protection, noise margins, and settling behavior must be evaluated against the motor environment and switching edges.

🏭

Industrial 24V Control Systems

The LM2904VQPWRG4Q1 is suitable for industrial 24 V control modules when the design operates within the device's 3 V to 26 V single-supply range. Two amplified channels can process pressure, position, or current-loop signals while preserving a compact 8-pin TSSOP footprint. The 700 kHz gain-bandwidth product supports general-purpose low-frequency conditioning, and the common-mode range includes ground for sensors with a zero-volt reference. Industrial designs should add appropriate input filtering and protection for switching-node, surge, and electromagnetic-interference environments.

⚡

Power-Supply Monitoring and Feedback

The LM2904VQPWRG4Q1 can amplify a scaled supply or output-voltage feedback signal and condition a second monitoring channel within the same TSSOP package. Its 26 V total supply rating is suitable for monitoring higher-voltage systems when the feedback network keeps the amplifier pins within their operating limits. The two channels are independent, allowing separate feedback gains and filter poles, while the 0.7 mA typical supply current is useful in compact control circuitry. The design must prevent the feedback network from driving an output beyond the available supply headroom.

🖥️

Low-Frequency Instrumentation Amplification

The LM2904VQPWRG4Q1 can serve in instrumentation, measurement, and test-control circuits that need two general-purpose gain stages rather than maximum bandwidth. Each internally compensated channel can implement a stable closed-loop gain selected by external resistors, and the two channels can process complementary or sequential measurements. Its common-mode input capability extends to ground, making zero-referenced source signals straightforward to amplify. For precision work, verify input offset, bias current, noise, and resistor matching against the required measurement accuracy.

کورتەی بەرهەمە پێشنیارکراوەکان

LM2904VQPWRG4Q1 Texas Instruments بەکارهێنراوە لە: Automotive Sensor Signal Conditioning, Body and Comfort Control Interfaces, Motor Control Support Circuits, Industrial 24V Control Systems, Power-Supply Monitoring and Feedback, Low-Frequency Instrumentation Amplification LM2904VQPWRQ1 Texas Instruments بەکارهێنراوە لە: Automotive Sensor Signal Conditioning, Industrial 24V Control Systems LM2904BVQPWRQ1 Higher-voltage next-generation family option بەکارهێنراوە لە: Body and Comfort Control Interfaces, Power-Supply Monitoring and Feedback LM2904BAVQPWRQ1 Higher-voltage next-generation family option بەکارهێنراوە لە: Motor Control Support Circuits, Low-Frequency Instrumentation Amplification
What is the LM2904VQPWRG4Q1?
The LM2904VQPWRG4Q1 is a Texas Instruments dual, general-purpose operational amplifier in an 8-pin TSSOP package. According to the manufacturer product page, the LM2904-Q1 family is qualified for automotive use in accordance with AEC-Q100. The device contains two independent, internally frequency-compensated amplifier channels and supports single-supply operation from 3 V to 26 V.
What are the key specifications of LM2904VQPWRG4Q1 that engineers should know?
The LM2904VQPWRG4Q1 combines two independent amplifier channels, a 26 V maximum total supply voltage, a 700 kHz gain-bandwidth product, and a typical supply current of 0.7 mA in an 8-pin TSSOP. Texas Instruments identifies the LM2904-Q1 family as AEC-Q100 qualified for automotive applications. Its common-mode input range includes ground, allowing direct sensing of signals near 0 V.
What is the operating voltage of LM2904VQPWRG4Q1?
The LM2904VQPWRG4Q1 operates from 3 V to 26 V with a single supply and from a minimum 3 V to maximum 26 V total supply difference with split supplies. The manufacturer describes the standard LM2904 family as a dual, 26 V, 700 kHz operational amplifier. Each split supply must remain within the applicable positive or negative 13 V magnitude limit.
Where can I download the LM2904VQPWRG4Q1 datasheet PDF?
The official LM2904-Q1 manufacturer product-details page provides access to documentation for LM2904VQPWRG4Q1. Texas Instruments describes the device as an industry-standard dual operational amplifier qualified to AEC-Q100. Use the manufacturer documentation for the authoritative pin description, ordering information, test conditions, absolute maximum ratings, and application guidance.
Where is the LM2904VQPWRG4Q1 pinout?
The LM2904VQPWRG4Q1 uses an 8-pin TSSOP package, and its complete numbered pin assignment is shown in the pin-description section of the Texas Instruments LM2904-Q1 datasheet. Use that table when assigning amplifier inputs, outputs, supply rails, and ground connections for both independent channels. The 8-pin TSSOP footprint is represented by the tssop-8 package diagram on this page.
Is LM2904VQPWRG4Q1 suitable for automotive applications?
Yes, the LM2904VQPWRG4Q1 belongs to the LM2904-Q1 family that Texas Instruments states is qualified for automotive use in accordance with AEC-Q100. Its dual general-purpose architecture supports paired low-frequency analog signal-conditioning functions in compact electronics. Final automotive suitability still depends on the complete system requirements, operating temperature, qualification records, and design validation.
What can replace LM2904VQPWRG4Q1?
The closest same-family replacements are the LM2904VQPWRQ1, LM2904BVQPWRQ1, and LM2904BAVQPWRQ1 when their ordering configurations match the required 8-pin TSSOP footprint. The LM2904B and LM2904BA versions provide upgraded functionality and higher-voltage operation than the original LM2904-Q1 generation. Verify pinout, supply limits, temperature grade, offset, bandwidth, and production status before substitution.
Is LM2904VQPWRG4Q1 the same as LM2904VQPWRQ1?
The LM2904VQPWRG4Q1 and LM2904VQPWRQ1 are closely related automotive-qualified ordering configurations, but the full suffix identifies the exact orderable grade and packing variant. The LM2904VQPWRG4Q1 includes the G4 suffix associated with the automotive-qualified family shown on the manufacturer page. Check the ordering table for the exact temperature grade and reel configuration before treating them as identical.
When should I choose LM2904VQPWRG4Q1 over LM2904VQPWRQ1?
Choose the exact LM2904VQPWRG4Q1 ordering code when the approved BOM specifies its G4/Q1 configuration or when procurement requires that exact suffix. Choose LM2904VQPWRQ1 only after confirming that its grade, temperature range, packing, and qualification status satisfy the design. The two devices share the general dual-amplifier architecture, but suffix differences can affect orderable configuration.
LM2904VQPWRG4Q1 vs LM2904BVQPWRQ1 - which is better for new designs?
LM2904BVQPWRQ1 is generally preferable for a new design that can benefit from the next-generation LM2904B-Q1 performance, while LM2904VQPWRG4Q1 is appropriate when the original automotive-qualified family and its exact ordering code are required. The LM2904B-Q1 family supports higher-voltage operation than the original 26 V LM2904-Q1 generation. Confirm package pinout and all operating limits before replacing one with the other.
What is the best Renesas equivalent for LM2904VQPWRG4Q1?
The verified cross-reference results identify a Renesas replacement in the LM2904 family, but they do not state a specific orderable MPN, package, or complete parametric comparison for this page. A cross-brand substitution should therefore not be treated as drop-in without confirming the 8-pin TSSOP footprint, pinout, supply range, automotive qualification, offset voltage, bandwidth, and temperature range. The manufacturer ordering and datasheet tables remain the deciding references.
Where can I buy LM2904VQPWRG4Q1 online?
Use the Request a Quote form on this page to request LM2904VQPWRG4Q1 pricing, stock confirmation, lead time, and the required reel configuration. The exact orderable MPN and automotive qualification status should be stated on the request. Requesting a quotation avoids ambiguity between closely related LM2904-Q1 ordering codes.
What is the lead time for LM2904VQPWRG4Q1?
Lead time depends on current factory inventory, order volume, and the exact reel or other packing configuration requested. Use the Request a Quote form on this page to obtain a current lead-time commitment for LM2904VQPWRG4Q1. Include the required quantity and target date so the supplier can confirm the correct automotive-grade ordering code.
Is LM2904VQPWRG4Q1 in stock?
Current stock should be confirmed through the Request a Quote form on this page rather than inferred from a search listing. Submit the exact MPN LM2904VQPWRG4Q1 and specify the required quantity and packing method. The supplier can then confirm available inventory and provide a current delivery estimate.
How much does LM2904VQPWRG4Q1 cost?
The current commercial price for LM2904VQPWRG4Q1 should be requested through the Request a Quote form on this page. Pricing can vary with order quantity, production allocation, reel configuration, and market conditions, so a historical or starting figure may not reflect an executable quotation. State the required quantity and packing method to obtain the applicable terms.
Does the LM2904VQPWRG4Q1 need external frequency compensation?
The LM2904VQPWRG4Q1 uses internally frequency-compensated amplifier channels for ordinary general-purpose closed-loop applications. Texas Instruments describes the LM2904 family as dual, independent, high-gain, frequency-compensated operational amplifiers. Follow the manufacturer application guidance for the selected topology and operating conditions rather than adding compensation components unless a specific datasheet circuit calls for them.

داتای سەرچاوەی ئەندازیاری بۆ LM2904VQPWRG4Q1 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose LM2904VQPWRG4Q1 when the design requires the exact Texas Instruments G4/Q1 ordering code, an 8-pin TSSOP footprint, two independent general-purpose amplifier channels, and operation within the original LM2904-Q1 26 V architecture. It is particularly suitable for paired low-frequency automotive sensor, body-control, and actuator interfaces where AEC-Q100 qualification and a common-mode input range that includes ground are important. LM2904VQPWRQ1 is the closest same-family ordering alternative when its exact grade and packing configuration meet the approved BOM. Consider LM2904BVQPWRQ1 or LM2904BAVQPWRQ1 for new designs needing the next-generation family's upgraded functionality and 36 V operating range, provided all pinout and parametric requirements are rechecked. Cross-brand substitutions should be used only after a direct comparison of the footprint, pinout, electrical limits, qualification, and lifecycle status.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە LM2904VQPWRQ1 LM2904BVQPWRQ1 LM2904BAVQPWRQ1
Package 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Number of Amplifier Channels 2 channels 2 channels 2 channels 2 channels
Automotive Qualification AEC-Q100 qualified AEC-Q100 qualified AEC-Q100 qualified AEC-Q100 qualified
Maximum Total Supply Voltage 26 V 26 V 36 V 36 V
Special Features Industry-standard dual general-purpose amplifier Industry-standard dual general-purpose amplifier Next-generation upgraded functionality Next-generation upgraded functionality

جیاکەرەوە سەرەکییەکان

  • Directly orderable automotive-qualified exact suffix (بەراورد بەLM2904VQPWRQ1)
  • Lower-voltage platform for established 26 V designs (بەراورد بەLM2904BVQPWRQ1)
  • Dual independent channels in a compact TSSOP (بەراورد بەLM2904BVQPWRQ1)

تێبینییەکانی دیزاین

Verify that the total voltage across the supply pins remains within the device operating range under startup, shutdown, load changes, and automotive transients. Although the LM2904-Q1 family supports a 26 V total supply, using the maximum rating does not remove the need for suitable surge and ESD protection. Confirm the selected external protection network against the actual source impedance, clamping behavior, and system qualification requirements.

Place each amplifier's feedback resistors and optional input or output compensation components close to the relevant TSSOP pins. Keep differential input traces short and route them away from high-current switching nodes and motor-drive traces. Maintain a continuous ground reference beneath the device and use a quiet return path so channel currents do not share a high-impedance ground segment.

Do not assume that the two amplifier channels are interconnected; each channel has independent inputs, outputs, and feedback components. In single-supply circuits, confirm that input and output common-mode requirements remain satisfied near the bottom of the supply range. Also verify that the desired closed-loop noise gain remains stable with the selected resistor values and capacitive loading described by the manufacturer.

For sensor interfaces with high source impedance, minimize leakage paths around the input pins and use guarding where appropriate. Add filtering at the amplifier input rather than relying on output filtering alone, and account for amplifier input bias-current error when the source impedance is high. The 700 kHz gain-bandwidth product should be compared with the required closed-loop bandwidth and settling behavior rather than treated as an isolated maximum.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Texas Instruments states that the LM2904-Q1 family is qualified for automotive use in accordance with AEC-Q100. Other compliance attributes are not established by the cited product information.

داتا پشتڕاستکراوەتەوە لە: 2026-11-09 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

LM2904VQPWRG4Q1 datasheet LM2904VQPWRG4Q1 datasheet pdf LM2904VQPWRG4Q1 pinout LM2904VQPWRG4Q1 specifications LM2904VQPWRG4Q1 equivalent LM2904VQPWRG4Q1 replacement LM2904VQPWRG4Q1 cross reference LM2904VQPWRG4Q1 vs LM2904VQPWRQ1 LM2904VQPWRG4Q1 footprint LM2904VQPWRG4Q1 application circuit Texas Instruments LM2904VQPWRG4Q1 LM2904VQPWRG4Q1 price LM2904VQPWRG4Q1 stock 8 pin TSSOP dual op amp 26V AEC-Q100 operational amplifier

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments LM2904VQPWRG4Q1 LM2904-Q1 LM2904VQPWRQ1 LM2904BVQPWRQ1 LM2904BAVQPWRQ1 operational amplifier op amp dual amplifier analog amplifier signal-conditioning IC semiconductor AEC-Q100 automotive qualification 26 V operational amplifier 700 kHz gain-bandwidth product 0.7 mA supply current common-mode input range internal frequency compensation 8-pin TSSOP TSSOP package family surface-mount package automotive sensor interface industrial control system single-supply operation
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ