LM324MTX - Quad Op-Amp, 1MHz, 32V, TSSOP-14 | Texas Instruments
MPN: LM324MTX ✓ چالاکLM324MTX گشتی
A general-purpose operational amplifier is a differential voltage amplifier with very high open-loop gain that, with external feedback networks, performs amplification, buffering, filtering, comparison and level-shifting functions. The op amp sits near the top of the analog signal-chain hierarchy: operational amplifier -> amplifier IC -> analog mixed-signal IC -> power management and signal conditioning system. Quad devices such as the LM324 integrate four of these amplifiers on a single die, cutting board area and BOM count in multi-channel analog designs.
Key differentiating features include single-supply operation from 3V up to 32V with rail-to-rail-referenced inputs and output that swings close to ground, four independently functioning amplifiers that stay matched and thermally coupled, and very low quiescent supply current draw that is largely independent of supply magnitude. Common-mode input range extends to ground, which is the defining advantage over older op amps in single-supply designs.
Internally, the LM324 uses compensated bipolar circuitry that guarantees stability at unity gain without external compensation components. Because all four amplifiers share one bias network, supply current rises only modestly as channels are exercised, and inter-channel thermal drift is minimized in DC-coupled multi-stage circuits.
Typical applications include transducer signal conditioning and sensor front ends, active RC filters and multichannel summing amplifiers, industrial PLC analog input stages, battery-powered portable instrumentation, and DC servo or motor-control loop error amplification where four gain stages are needed on one rail.
Design-wise, remember the output stage is not rail-to-rail: the high-side output saturates roughly 1.5V below VCC under load, so gain stages needing output swing near the positive rail require headroom or a newer RRIO alternative. The LM324MTX TSSOP-14 footprint is pin-identical across the LM124/LM224/LM324/LM2902 temperature-grade family.
This page consolidates drop-in alternatives, per-parameter comparison against automotive and military grade variants, practical design notes, and pricing evidence in one place - information not compiled in the manufacturer datasheet alone.
جێگرەوەکانی جێگۆڕکێ بۆ LM324MTX — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM324MTX (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Amplifier Type, Package.
LM324AMX/NOPB
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM224AMX/NOPB
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LM124AMX/NOPB
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LM324MTX زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Amplifier Channels | 4 (quad) |
| Amplifier Type | General Purpose / Standard |
| Gain Bandwidth Product | 1 MHz |
| Supply Voltage Range (Single) | 3 V to 32 V |
| Supply Voltage Range (Split) | +/-16 V |
| Total Supply Voltage Maximum | 32 V |
| پاکێج | 14-TSSOP |
| جۆری دامەزراندن | Surface Mount |
| Frequency Compensation | Internal |
| Power Drain | Low power; supply current drain independent of supply voltage magnitude |
| Input Common-Mode Range | Includes ground (single-supply capable) |
| Temperature Grade Family | LM124 / LM224 / LM324 / LM2902 series |
| Packaging | Tape and Reel (suffix X) |
ڕێکخستنی پینی LM324MTX
| پین 1 | OUT1 — Output of amplifier 1 |
| پین 2 | IN1- — Inverting input of amplifier 1 |
| پین 3 | IN1+ — Non-inverting input of amplifier 1 |
| پین 4 | VCC — Positive power supply |
| پین 5 | IN2+ — Non-inverting input of amplifier 2 |
| پین 6 | IN2- — Inverting input of amplifier 2 |
| پین 7 | OUT2 — Output of amplifier 2 |
| پین 8 | OUT3 — Output of amplifier 3 |
| پین 9 | IN3- — Inverting input of amplifier 3 |
| پین 10 | IN3+ — Non-inverting input of amplifier 3 |
| پین 11 | VEE/GND — Negative supply or ground reference |
| پین 12 | IN4+ — Non-inverting input of amplifier 4 |
| پین 13 | IN4- — Inverting input of amplifier 4 |
| پین 14 | OUT4 — Output of amplifier 4 |
بەکارهێنانە باوەکان
LM324MTX گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Signal Conditioning, Active RC Filters, Battery-Powered Portable Instrumentation, Motor Control and DC Servo Loops, Audio Summing and Pre-Amplification, Comparator and Level-Detection Circuits.
Industrial Sensor Signal Conditioning
The LM324MTX is a natural fit for transducer front ends in PLC analog input modules and industrial sensor boards because its input common-mode range includes ground, allowing single-supply 5V, 12V, or 24V-derived rails to read ground-referenced sensor outputs directly. Four independent amplifiers on one die let designers implement buffer, gain, offset, and filter stages in one 14-pin TSSOP package, cutting board area and matched-channel drift. Because the internally compensated 1 MHz bandwidth covers low-frequency sensor signals from strain gauges, thermistors, and pressure transducers, no external compensation is required, and the low, supply-independent current draw suits dense multichannel industrial I/O cards with strict thermal budgets.
پێشنیارکراو
Active RC Filters
With its 1 MHz gain-bandwidth product and internal unity-gain compensation, the LM324MTX supports multiple active RC filter stages - Sallen-Key low-pass, band-pass, and multiple-feedback topologies - up to corner frequencies of tens of kilohertz with predictable gain error. Integrating four amplifiers lets one TSSOP-14 device realize a complete fourth-order filter chain on a single positive rail, which is common in industrial control boards and audio pre-filtering before ADCs. Designers should keep the closed-loop gain-bandwidth margin above about 10x the filter cutoff to preserve Q accuracy, and must remember the output cannot swing within roughly 1.5V of the positive rail, which constrains signal amplitude in high-supply filter designs.
پێشنیارکراو
Battery-Powered Portable Instrumentation
The LM324MTX's low power supply current drain - explicitly independent of the magnitude of the supply voltage per the datasheet - makes it attractive for battery-powered meters, handheld testers, and portable data loggers. Its ability to operate from a single 3V-supply-compatible rail upward, with inputs reading down to ground, simplifies single-cell or single-lithium-rail analog front ends without a negative charge pump. Four amplifiers per package mean a portable instrument can buffer a sensor, amplify a bridge signal, and drive a display-scaling stage from one IC. The trade-off is that the output high-swing limitation of about 1.5V below VCC must be respected in rail-to-rail designs; for sub-3V rails, a modern RRIO quad is the better choice.
پێشنیارکراو
Motor Control and DC Servo Loops
Error amplification in motor drives, PWM comparators, and DC servo positioning loops benefits from the LM324MTX's wide 32V supply ceiling, which lets the amplifier run directly from 24V industrial rails without a separate low-voltage regulator. The four channels map naturally onto current-loop, velocity-loop, and position-loop error stages plus a reference buffer in a single package, and the thermally matched die improves DC loop accuracy as the drive heats. Its internally compensated 1 MHz bandwidth is more than adequate for control loop bandwidths in the kilohertz range, and the ground-including common-mode range simplifies current-sense interfaces. Output swing headroom near the positive rail must be budgeted in the loop design.
پێشنیارکراو
Audio Summing and Pre-Amplification
In consumer and industrial audio boards, the LM324MTX provides four gain or summing stages in one TSSOP-14 footprint for microphone preamps, mixer summing buses, and level-shifting stages ahead of codecs. Running from a single rail removes the need for a negative supply, and the low-side output swing near ground suits AC-coupled designs with mid-rail biasing generated by one of the four amplifiers as a virtual-ground buffer. Designers should note the family's limited slew rate and bandwidth compared with dedicated audio op amps, so it suits voice-band and monitoring circuitry more than high-fidelity signal paths; for demanding audio, use it for bias and control functions and reserve higher-bandwidth quads for the main signal chain.
پێشنیارکراو
Comparator and Level-Detection Circuits
Although optimized as an amplifier, the LM324MTX is widely used in low-speed threshold detection: undervoltage/overvoltage comparators, window detectors, and limit alarms in industrial and automotive-adjacent equipment. Two of its four channels can form a window comparator while the remaining channels generate the reference ladder buffer and alarm output driver on one rail. The ground-including common-mode input range lets thresholds be referenced directly to ground without negative supplies, and its wide supply range supports direct connection to monitored 12V, 24V, or 32V rails through simple dividers. Because it is not a true comparator, response times are in the microsecond range - acceptable for supervision and alarm functions, but not for fast fault protection.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LM324MTX — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LM324AMX/NOPB | LM224AMX/NOPB | LM124AMX/NOPB |
|---|---|---|---|---|
| Package | 14-TSSOP | 14-TSSOP - same | 14-TSSOP - same | 14-TSSOP - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Amplifier Channels | 4 | 4 | 4 | 4 |
| Gain Bandwidth Product | 1 MHz | 1 MHz | 1 MHz | 1 MHz |
| Maximum Total Supply Voltage | 32 V | 32 V | 32 V | 32 V |
| Input Offset Voltage Grade | Standard grade | A-grade (tighter limit) | A-grade (tighter limit) | A-grade (tighter limit) |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount | Surface Mount |
جیاکەرەوە سەرەکییەکان
- Standard grade is the lowest-cost family member (بەراورد بەLM324AMX/NOPB)
- Commercial temperature range optimization (بەراورد بەLM124AMX/NOPB)
- Four matched amplifiers with ground-including input range (بەراورد بەLM324AMX/NOPB (equivalent match))
تێبینییەکانی دیزاین
The most frequent LM324 design error is expecting rail-to-rail output swing. The high-side output stage saturates roughly 1.5V below VCC under load, so a 5V-supplied stage cannot deliver more than about 3.5V peak. Reserve one amplifier of the quad to generate a mid-supply virtual ground and AC-couple stages, or increase supply headroom. Also avoid using the LM324 as a true comparator in fast protection circuits - its microsecond-class response is fine for supervision alarms but too slow for cycle-by-cycle current limiting.
Place 100 nF ceramic decoupling capacitors directly at the VCC (pin 4) and VEE/GND (pin 11) pins with short return paths, because all four amplifiers share one supply node and channel-to-channel coupling rises with trace inductance. Keep high-impedance input traces (pins 2, 3, 5, 6, 9, 10, 12, 13) short and guarded by ground pour to limit leakage and pickup. The TSSOP-14 is lead-free compatible with standard reflow profiles; follow the manufacturer datasheet soldering guidelines for the package.
Estimated: budget dissipation as P = VCC * Iq_total + sum over channels of (VCC - VOUT_k) * IOUT_k. The datasheet characterizes supply current drain as largely independent of supply magnitude, so at 32V the quiescent share alone rises versus a 5V design even with unloaded channels. Verify per-channel output current against the datasheet continuous rating and confirm junction temperature with the TSSOP-14 thermal resistance from the manufacturer datasheet before finalizing a dense multichannel board layout.
زانیاری پابەندبوون
The NOPB suffix used on TI LM324 variants denotes No Pb (lead-free) plating; confirm current RoHS and REACH status on the manufacturer product page before release.